3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
|
|
- Pierce Willis
- 5 years ago
- Views:
Transcription
1 Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification Revised
2 Page of 8 Table of Contents Title Page Contents Scope M Customer Documents Performance Testing Performance and Characteristics Overview Electrical Mechanical Physical Environmental Qualification Test Groups and Sequences Figures Agency Listings Important Notice Warranty Information Steven A. Neu: Approved Jim W. Wessman: Approved
3 Page 3 of 8.0 Scope This document summarizes test methods, test conditions, and product performance requirements for 3M Pak 50 Boardmount Socket P50 Series mated to 3M Pak 50 Boardmount Plug P50 Series. In the event of performance data conflicts between this specification and any documents listed below, this specification supersedes those documents. Materials and finishes listed in the documents below apply and are included in this specification for reference only..0 3M Customer Documents Technical data sheet for Pak 50 Boardmount Plug P50 Series Techical data sheet for Pak 50 Boardmount Socket P50 Series 3.0 Performance Testing Unless otherwise specified, all tests shall be performed on P50-XXXS-XXX-EA sockets mated to P50-XXXP-XXX-EA plugs at ambient environmental conditions per EIA-36. Unless otherwise specified, all values and limits are typical of those obtained by qualification testing of the subject product. All specifications are subject to revision and change without notice from 3M..0 Performance and Characteristics Overview. Ratings Dielectric Withstanding Voltage: 500 VACrms at sea level Current (AC or DC): A Temperature: -55 C to +85 C Insulation resistance: > x0 9 Ω at 500 VDC. Materials Socket: Material: Glass Filled Nylon Flammability: UL 9V-0 Color: Black Contact Material: Phosphor Bronze Header: Material: Glass Filled Nylon Flammability: UL 9V-0 Color: Black Contact Material: Phosphor Bronze.3 Finishes Plating: Underplating: Nickel Wiping Area: 0 μ" [.5 μm ] Gold Solder Tails: Gold Flash Retaining Clips: Tin-Copper
4 Page of 8. Regulatory Compliance See Regulatory Information Appendix (RIA) in the RoHS compliance section of for compliance information. See customer drawings for regulatory specifics on each connector. 5.0 Electrical Description or Parameter Dielectric Withstanding Voltage (DWV) Current Rating: All Contacts in Series Current Rating: 5 Contacts in Series Current Rating: Contacts in Series Low Level Contact t Resistance (LLCR) Specification No dielectric breakdown or arcing. Temperature Rise: < 0⁰C Results: 0.5 A = 6⁰C Temp. Rise 0.8 A = 7⁰C Temp. Rise 0.9 A = ⁰C Temp. Rise.0 A = 5⁰C Temp. Rise Temperature Rise: < 0⁰C Results:.0 A = ⁰C Temp. Rise.5 A = 7⁰C Temp. Rise.8 A = 9⁰C Temp. Rise.0 A = ⁰C Temp. Rise Temperature Rise: < 0⁰C Results:.0 A = ⁰C Temp. Rise.5 A = 5⁰C Temp. Rise.0 A = 7⁰C Temp. Rise Max R: <5 mω Ambient: ⁰C Ambient: ⁰C Test Method Apply 650 VAC RMS Voltage for minute betweeen adjacent contacts. Ambient: ⁰C Wire Measurement Current: 00mA DC Results Insulation Resistance (IR) 000 MΩ min. Apply 500V DC for minutebetween two adjacent contacts. 6.0 Mechanical Description or Parameter Specification Test Method Test Standard or Method Physical Shock No damage or deformation. Acceleration: 90 m/sec No electrical discontinuity > µ sec Shock Mode: half sine wave Duration: ms 3x in each X,Y,Z opposite direction 00mA DC applied to all contacts in series
5 Page 5 of 8 Vibration Insertion Force Withdrawal Force (Contact Retention) Durability (00 times) Durability (500 times) No damage or deformation. No electrical discontinuity > µ sec Insertion Force: < 86. N (00 position) Withdrawal Force: < 39. N (00 position) No damage or deformation. LLCR: 5 mω Max No damage or deformation. LLCR: 5 mω Max Frequency: 0-55 Hz Amplitude:.5 mm Sweep time: min hours in each X,Y,Z opposite direction 00 ma applied to all contacts in series Measure with mating connectors Measure with mating connectors 00 cycles at cycles per hour 500 cycles at 000 cycles per hour 7.0 Physical Description or Parameter Specification Test Method Result Visual Conforms to the design drawings Visual Inspection 8.0 Environmental Description or Parameter Specification Requirement or Conditions Test Standard or Method Temperature Life (Thermal Aging) LLCR: 0 mω Max No Damage or Deformation Temperature: +85⁰C Duration: 0 hours Salt Spray Thermal Shock Humidity No serious corrosion Temperature: +35⁰C LLCR: 5mΩ Max Duration: 8 hours Concentration: 5% No damage or deformation.. -55⁰C for 30 min LLCR: 5 mω Max. +5⁰C for 5 min Repeat -, 5 cycles ( 5 cycles, -55⁰C to +85⁰C ) ⁰C for 30 min. +5⁰C for 5 min No damage or deformation. Humidity: 90-95% RH DWV: No breakdown or arcing Temperature: 0⁰C LLLCR: 5 mω Max Duration: 96 hrs
6 Page 6 of 8 H S Exposure SO Exposure No serious corrosion. LLLCR: 5 mω Max No serious corrosion. LLLCR: 5 mω Max Temperature: 0⁰C Concentration: 3 ppm RH: 80% Duration: 8 hours Temperature: 0⁰C Concentration: 0 ppm RH: 80% Duration: 8 hours 9.0 Qualification Test Groups and Sequences 9. Sequenced Tests Test or Examination A B Test Group C D E F Visual Insulation Resistance Dielectric Withstanding Volatge Low Level Contact Resistance Total Insertion Force Total Withdrawal Force Thermal Shock Vibration Shock Humidity Durability (00) Salt Spray S0 Exposure HS Exposure Temperature Life , , 6 5 3, 5 3, 5 3, 5 9. Independent Tests Durability (500) Dielectric Withstanding Voltage 3 Current Rating Insulation Resistance 5 Mating Force / Contact 6 Unmating Force / Contact
7 Page 7 of 8 0. Figures 0. Temperature Rise Plot All Contacts 5 Contacts Contact.0 Agency Listings. Underwriters Laboratories (UL) Agency UL File No. E68080
8 Page 8 of 8 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability This product will be free from defects in material and manufacture for a period of one () year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M 0. All rights reserved.
3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
More information3M HDC Socket.100 Right Angle, PCB, 3 or 4-Row, Solder Tail or Press-Fit HDC Series
M HDC Socket.100 Right Angle, PCB, or 4-Row, Solder Tail or Press-Fit HDC Series High density -row version, up to 240 contacts single bay Mates with -row single plugs and headers High density 4-row version,
More informationProduct Data Sheet PD-0036-B. 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series
Product Data Sheet PD-0036-B 3M PC Boardmount Plug and Receptacle, 2 mm 95X Series Page: 1 of 7 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2 3.1 Test Specimens...2 3.2 Standard Test
More information3M CP2 Press-Fit Header
M CP2 Press-it Header 25 mm basic system unit 8, 44 and 50 mm module 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design reduces manufacturing
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More information3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
More information3M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector Boardmount Through-Hole, Vertical Receptacle SBR Series 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak
More information3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SCA-2 CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE. 4 1.2 Description. 4 2.0 APPLICABLE DOCUMENTS
More informationWIESON TECHNOLOGIES CO., LTD.
TABLE OF CONTENT 1. Scope.... 2 2. Reference Documents. 2 3. Material and Components.... 2 4. Design and Construction.... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements and
More informationMOLEX TAIWAN LTD ( GC ) TITLE : SINGLE PORT UP-RIGHT TYPE USB CONNECTOR
SINGLE PORT UP-RIGHT TYPE USB CONNECTOR 971205 1 of 8 1.0 SCOPE This specification covers the USB series product. 2.0 APPLICABLE DOCUMENTS The following documents form a part of this specification to the
More informationBlower Motor 3P Connector
1. Scope Blower Motor P Connector 1.1 Content This specification covers the requirements for product performance, test methods and quality assurance provisions of Blower Motor P connector. Applicable product
More informationPRELIMINARY PRODUCT SPECIFICATION. Part Number Product Description Doc Number
Page 1 PRELIMINARY Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the USB Type C Receptacle range. USB4050, USB4055, USB4060, USB4065. 2.0 PRODUCT NAME AND
More informationPRODUCT SPECIFICATION
CONNECTOR CONNECTOR 1 of 6 CONNECTOR 1.0 SCOPE This Product Specification covers the dip type for 13pins slimline SATA receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMER(S)
More informationProduct Specification
Product Specification 2013-10-21 FPC Connector 0.5mm Pitch SMT Type Bottom Contact H:2.0 Update List: Item Update Description Rev. Issued Date Revisor 1 New Edit A 2013/10/21 DLITY Prepared By DLITY Rechecked
More informationDDR4 SODIMM Socket 0.5mm Pitch 260Pos
1. Introduction 1.1 Testing was performed on DDR4 SODIMM SOCKET 260P to determine if it meets the requirement of Product Specification, 108-115122 Rev.A. 1.2 Scope This report covers the electrical, mechanical
More informationJun-2012 Rev A
Design Objective 108-57912 01-Jun-2012 Rev A MINI USB CONNECTOR, RECEPTACLE, VERTICAL, DIP, B TYPE 1. SCOPE 1.1. Contents This specification covers the performance, tests and quality requirements for the
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationThis specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.
DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore AMP Ltd makes no representation or warranty, express
More informationPRODUCT SPECIFICATION
1 of 10 H 1.0 GENERAL THIS SPECIFICATION COVERS.039 INCHES VERTICAL DDR II SOCKETS WITH BLANKED / FORMED CONTACT DESIGNED FOR PRINTED WIRING BOARD TO DUAL IN-LINE MEMORY MODULE INTERCONNECTION. IN ALL
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationAPR 10 Rev. A
1. Introduction 1.1 Testing was performed on the DDR SODIMM SOCKET 200P to determine if it meets the requirement of Product Specification, 108-78628 1.2 Scope This report covers the electrical, mechanical
More informationPRODUCT. Part. A1 Micro USB USB3140. Rev. Page. Description Doc USB3140.
1 PREL LIM MI IN AR RY 1.0 SCOPE. This specification covers performance, tests and quality requirements for the Receptacle (Type B, SMT, Vertical)..0 NAME AND PART NUMBER. Receptacle, 5 Pins, SMT, Type
More informationQualification Test Report. Modular Plugs, Unshielded and Shielded
Qualification Test Report 501-131013 26 JAN 16 Rev. A Modular Plugs, Unshielded and Shielded 1. INTRODUCTION 1.1. Purpose Testing was performed on modular plugs to determine their conformance to the requirements
More informationSERIAL ATA POWER CONNECTOR 1.27 mm PITCH
: 1.27 mm PITCH TBLE OF CONTENTS 1.0 SCOPE 2.0 PPLICBLE DOCUMENTS 3.0 MTERIL SPECIFICTIONS 3.1 DESIGN ND CONSTRUCTION 3.2 MTERILS 4.0 PERFORMNCE ND TEST 5.0 TEST REQUIREMENTS ND PROCEDURES SHT 1 2 3 4
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationPRODUCT SPECIFICATION
SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationSpezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano
1 Scope This Specification covers the construction and characteristics of 0,5mm Pitch FFC and FPC (Flat Flexible Cable and Flat PCB Cable ) of Z56-xx ZIF Connector Series. The part shall satisfy the following
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationSurface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationCONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG
Page 1 of 27 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, NON-REMOVABLE GAUGE 26 PCB PIN CONTACTS BASED ON TYPE 8MCG Issue 6 June 2018 Document Custodian: European Space Agency see https://escies.org
More informationAMD Socket 940 Qualification Plan
AMD Socket 940 Qualification Plan Publication # 30353 Revision: 3.04 Issue Date: September 2003 2003 Advanced Micro Devices, Inc. All rights reserved. The contents of this document are provided in connection
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. PRODUCT SPECIFICATION 1. SCOPE 1.0mm9(&FPC 2$ This specification covers
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationQualification Test Report
Qualification Test Report 501-97 28Jun10 Rev E Connector, Shielded, Miniature Circular DIN, PCB Mounted 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics Mini DIN Printed Circuit Board
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationHigh-Voltage Types Ordering Information, Mica Capacitors
High-Voltage Types Ordering Information, Mica Capacitors Ordering Information Ordering Information: Order by complete part number, as below. For other options,write your requirements on your quote request
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More information25, 35, 50, 63 Vdc. RoHS Compliant. Size Code ± 0.5 ± 0.3. F to
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Using a ruggedized construction, type HZC_V withstands a 30 G vibration test. As the main countermeasure to vibration, the
More informationMetallized Polyester Film Capacitors MKT Radial Potted Types
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationMetallized Polyester Film Capacitors MKT Radial Potted Type
www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance
More informationDC Film Capacitors MKT Axial Type
MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationDC Film Capacitors MKT Axial Type
MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationM2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More information303139, FEATURES INTRODUCTION. TABLE 1 - TOLERANCE AND TCR VS. RESISTANCE VALUE (- 55 C to C, + 25 C ref.)
303139, 303140 Models # 303139 and 303140 - Molded Surface Mount Space and Military Grade Resistors SMRxDZ with Screen/Test Flow in Compliance with EEE-INST-002, (Tables 2A and 3A, Film/Foil, Level 1)
More informationSeries FEATURES AND BENEFITS INTRODUCTION. Figure 1 Power Derating Curve. Table 1 Tolerance and TCR vs. Resistance
The 303143 Series Ultra The High-Precision 303143 Series Fixed Resistor Z-Foil Z201 Ultra High-Precision Fixed Resistor Z-Foil Z201 Screen/Test Flow as modified from S-311-P813 Proposed by NASA FEATURES
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 7.62 mm lead pitch. Supplied loose in box and taped on reel or ammopack AEC-Q200 qualified Material categorization: For definitions of compliance please
More informationDC Film Capacitors MKT Radial Lacquered Type
DC Film Capacitors MKT Radial Lacquered Type FEATURES Available taped and loose in box Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More information2D Patterns MODULAR & EASY-TO-INSTALL. turf.design 844 TURF OMG. pat e n t pending
Adhesive Tile by 2D Patterns MODULAR & EASY-TO-INSTALL Glass walls, concrete floors, and exposed ceilings are the leading cause of poor office acoustics. Most offices want an open office feel, but often
More informationMIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Accutrim 240 (RJ26 Style) Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, / 4 " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of MIL-PRF-905, Char. H with a Smooth
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
More informationRF LOADS FIXED COAXIAL DC 22 GHz DETAIL SPECIFICATION
1/ 11 Titre / Title RF LOADS FIXED COAXIAL DC 22 GHz Rédigé par / Written by Responsabilité / Responsibility Date Signature S. POIZAT Space Project Manager Vérifié par / Verified by V. EUDELINE Space B.
More informationReference Only Spec. No. JEFL243B 0003F-01 P 1/ 6
Spec. No. JEFL243B 0003F-01 P 1/ 6 DC Common Mode Choke Coil PLT09HN2003R0P1B Reference Specification 1. Scope This reference specification applies to DC Common Mode Choke Coil (PLT09H Series). 2. Part
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type
AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationAC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type
Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch; 7.5 mm bent back pitch Low contact resistance Low loss dielectric Small dimensions
More informationTITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS S-01
Specification TITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS123-000S-01 1 OF 4 1999/09/30 1. GENERAL SCOPE THIS SPECIFICATION COVERs THE GENERAL REQUIREMENTs
More informationGreen Commodity Thick Film Chip Resistors
Green Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Green resistor - does not use exemptions Material categorization: for definitions of compliance
More informationOptocoupler with Transistor Output
Optocoupler with Transistor Output 17197_4 DESCRIPTION The HS817 series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic dual inline package.
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationPRODUCT SPECIFICATION SEARAY CONNECTOR SYSTEM
SEARAY ONNETOR SYSTEM SEARAY PLUG ONNETOR SEARAY REEPTALE ONNETOR UP2009-2227 SEARAY ONNETOR SYSTEM 1 of 8 PS-45970-001 T. GREGORI J. OMERI J. OMERI SEARAY ONNETOR SYSTEM 1.0 SOPE This Product Specification
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More information