C V S T B T 1 0 ( )

Transcription

1 SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material Resistive element O ring Base contact Fixed Wipercontact Terminal Wheel pin Earth terminal Polyamide Silicone rubber UL-9HB Nickel, Gold-plated Stainless steel, DAP Gold-plated Copper alloy, Palladium-plated UL-9HB Copper alloy, Gold-plated Polyoxymethylene UL-9HB Stainless steel, Stainless Gold-plated steel PART NUMBER DESIGNATION PART NUMBER DESIGNATION No. Series of bitsname bit 0 mm bits -. mm 0(06) bits 0 bits () 0 bits may be replaced by for type writing conveniences. Product shape T Top adjustment S Side adjustment F Rear adjustment B Panel mount LIST OF PART NUMBERS C V S - 0 T B T 0 ( 0 6 ) TR Top adjustment with knob SR Side adjustment with knob FR Rear adjustment with knob (Gull wing) -0TB- -0TB -0B -0C -0TB- -0TB -0B -0TB- -0TB -0B Blank BGull wing CThrough hole Resistance value T (Reel) Blank Bulk in plastic bag (0C : only) (Gull wing) Please refer to the LIST OF PART NUMBERS when placing orders. -0TB- -0TB -0B -

2 -6/- SLIDE WIREWOUND SWITCHES TRIMMERS ( mm PITCH) LIST OF PART NUMBERS Adjustment position Top adjustment Top adjustment with knob Side adjustment Side adjustment with knob Panel mount Rear adjustment FEATURES Rear adjustment with knob Not manufactured Verify Lowest the above profile part design numbers of <Nominal. mmresistance values> (Fig. ) when placing Fine pitch orders. of mm Easy motion with knob height of 0. mm PART Nominal resistance NUMBER range DESIGNATION Resistance tolerance Power rating Electrical Series continuity name End resistance Resolution 0 bit 0 bits 0 bits Peak noise Operating temp. range Temp. coefficient 0 bits 0 bits Dimension 6.6 mm. mm ELECTRICAL CHARACTERISTICS -6T (06T) -6S (06S) -6B (06B) -6F (06F) -6 (06) - () 0 ~ 0 k 0 ~ 00 k 0. W (0 C) 0 W (0 C) 0 % LIST Insulation resistance OF PART NUMBERS Dielectric strength 900 Vrms, min (Room conditions) (Gull wing) Approx. 0. g (-6T) Approx..60 g (-T) -0TB- Approx. 0. g (-6S) Approx. 9 g (-S) Approx. -0TB. g (-6B) Approx g (-B) pcs./reel Net weight Approx. -0B 0.9 g (-6F) -0C Approx.. 00 g pcs./pack (-TR) -0TB- Approx.. 00 g (-SR) pcs./reel Approx..6 g (-F) -0TB Approx..9 g (-FR) -0B -0TB- -0TB -0B Nominal INTERNAL resistance STRUCTURE values Fig. contact The products indicated by A mark are manufactured upon receipt of order basis. Fixed contact Copper alloy, Gold-plated 0. W (0 C) C V S - 0 T B - 0 W (0 C) Continuous for full mechanical range % or, whichever is greater. ~ 0. %.0 ~ 0.0 % 00 (ENR) maximum ~ 0 C -T (T) -TR (TR) -S (S) -SR (SR) -B (B) -F (F) -FR (FR) / C maximum 000 M minimum (DC00 V) 0 Part k name A Material A A A A 0 k A A A A A k Stainless Asteel, AGold-plated A A A A A 0 k A A A A 0 k Polyamide A A A A 00 k A A A A Earth terminal MECHANICAL CHARACTERISTICS CFCs, Halon, Carbon tetrachloride - 6 (06) and designated - bromic () flame Mechanical angle 0 ( turn) Operating torque Stop strength Rotational life Terminal strength k k k -6 (06) - () T S B F T TR S SR B F FR A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A T (Reel) Blank Bulk in plastic bag (0C : only) (Gull wing). mn m 9.6 mn m {0 gf cm} maximum {00 gf cm} maximum 9.0 mn m 9.0 mn m {00 gf cm} minimum { kgf cm} minimum 00 cycles 00 [R/R pcs./reel %] Blank.9 N {90 gf} minimum Tensile strength Shape MIL-R-0 of terminal BGull wing CThrough { }Reference hole only -0TB- -0TB -0B - Rated power is given for the maximum input voltage (V) and maximum wiper current (ma) for the resistance value.

3 SLIDE SWITCHES ( mm PITCH) -6/- WIREWOUND TRIMMERS ENVIRONMENTAL CHARACTERISTICS (In accordance with MIL-R-0) FEATURES Low temp. operation C, h [R/R % 0.0] Lowest profile design of. mm [S.S. % Resolution] High temp. exposure 0 C, 0 h Fine pitch of mm Easy motion with knob height of 0. mm Immersion seal C No leaks Test item Test conditions Specifications Thermal shock Humidity Shock Vibration Load life Salt spray Soldering heat 6 ~ C, cycles 0 ~ 9 %, 0 h [R/R % 0.0] [S.S. % Resolution] [R/R % 0.0] 9 m/s [R/R % 0.0] Acceleration [S.S. % Resolution] 96 m/s, 0 ~ 000 Hz 0 C [R/R %] (Full load), 000 h [S.S. % Resolution] No corrosion 0 C, s RESOLUTION CHARACTERISTICS Resolution (%) Nominal resistance values () -6 (06) - () k k k k k k 0. 0 k 0. Part name 0 k Material k 0.0 contact Fixed contact Polyamide Copper alloy, Gold-plated R/RChange in total resistance S.S. Setting stability PART NUMBER DESIGNATION Earth terminal C V S - 0 T B - 0 bit 0 bits 0 bits 0 bits 0 bits Blank BGull wing CThrough hole T (Reel) Blank Bulk in plastic bag (0C : only) LIST OF PART NUMBERS (Gull wing) -0TB- -0TB -0B -0C -0TB- -0TB -0B -0TB- -0TB -0B (Gull wing) -0TB- -0TB -0B -

4 -6/- SLIDE WIREWOUND SWITCHES TRIMMERS ( mm PITCH) OUTLINE DIMENSIONS -6T (06T) Top adjustment FEATURES -6S (06S) Lowest Side adjustment profile design of. mm Fine pitch of mm Easy motion with 0 knob Nom. height of 0. mm PART NUMBER DESIGNATION -6B (06B) Panel mount 0 bit 0 bits 0 bits 0 Nom. 0 bits 0 bits -6F (06F) Rear adjustment 0 Nom. Stopper range 0. W.6 L 0. D 0. W.6 L 0. D LIST OF PART NUMBERS Unless otherwise specified, tolerance : 0. (Unit : mm) φ 0. Part name contact Fixed contact Front face C V S - 0 T B - M (ISO) φ 6.6 6±.6.6.± 6. Material Polyamide. Stainless steel, Gold-plated Copper alloy, Gold-plated Earth terminal max. φ 0. Gold retardant platedpbbos and PBBs are not used in our products Red pcs./reel Blank BGull 0.6 W wing.0 D Accessory CThrough hole T (Reel) Blank Bulk in plastic bag (0C : only) Shaft details Side segment. Nut, t =.. Washer, t = 0. CW rotation W.6 L 0. D 0. (Gull wing) -0TB- -0TB -0B -0C -0TB- -0TB -0B -0TB- -0TB -0B (Gull wing) -0TB- -0TB -0B -

5 SLIDE SWITCHES ( mm PITCH) -6/- WIREWOUND TRIMMERS OUTLINE DIMENSIONS -T (T) Top adjustment 0 Nom. 0. Unless otherwise specified, tolerance : 0. (Unit : mm) CW rotation -TR (TR) Top adjustment with knob FEATURES 0 Nom. Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm -S (S) Side adjustment PART NUMBER DESIGNATION -SR (SR) 0 Nom. Side No. adjustment of bits with knob 0 bit 0 bits 0 bits 0 0 bits Nom. 0 bits 0. W L 0. D W L D 0. W L 0. D 0.6 W L D LIST OF PART NUMBERS 0 Part name Knurl M = contact 6. max. 0 Fixed contact Material Polyamide Copper alloy, Gold-plated Earth terminal 9.6 max. CFCs, Halon, Carbon tetrachloride and. designated bromic flame C V S - 0 T B - Blank BGull wing CThrough hole T (Reel) Blank Bulk in plastic bag (0C : only) -B (B) s (Gull wing) (Gull wing) Panel mount -0TB- -0TB- 0 Nom. -0TB M (P = ) pcs./reel (ISO) 0. -0TB -0B -0C -0B -0TB- - -0TB R -0B max. -0TB- max. Stopper range 0. -0TB -0B 0. C max.. max max. Kaurl M = max... max... Shaft details Red Side 00 segment pcs./reel 0.6 Accessory. Nut, t =.. Washer, t = 0.

6 -6/- SLIDE WIREWOUND SWITCHES TRIMMERS ( mm PITCH) OUTLINE DIMENSIONS -F (F) Rear adjustment FEATURES.±0. 0. W L 0. D ±0. max. ±. max. -FR (FR) Rear adjustment with knob Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm.±0. 6 max. 6 max. φ φ 0. φ C ±0. max. ±. max. Unless otherwise specified, tolerance : 0. (Unit : mm) Part name contact Fixed contact Earth terminal Material Polyamide Copper alloy, Gold-plated CW rotation PART NUMBER DESIGNATION C V S - 0 T B - 0 bit 0 bits 0 bits 0 bits 0 bits Blank BGull wing CThrough hole T (Reel) Blank Bulk in plastic bag (0C : only) LIST OF PART NUMBERS (Gull wing) -0TB- -0TB -0B -0C -0TB- -0TB -0B -0TB- -0TB -0B (Gull wing) -0TB- -0TB -0B -