LINEAR SETS Modular slide units
|
|
- Archibald McKenzie
- 5 years ago
- Views:
Transcription
1 TE GE E R INE e ll move you with a unique package of service, components and systems. ith superior service and leading edge technology, inear earings can offer you the best solution to all your linear motion needs. From a single ball bushing to complete linear motion and control components, our fully qualified and experienced in-house engineers support our entire product range. Quality System ctuators all screws all screw support bearings all transfer units rakes & clutches - industrial Cam followers Electronic controls Engineering support Full workshop facilities inear bearings inear modules inear sets Miniature bearings Precision gearheads Precision index drives Profile building systems Profile rail guides Rod ends Screwjacks Shafts and accessories Slide tables Spherical bearings Splines Uhing traversing drives INER SETS Modular slide units Engineering support In-house workshop facilities PTY T Quality Endorsed Company ISO 1 icqec 2 SI Global MEOURNE: Tel: (3) Fax: (3) EERS IN INER MOTION TECNOOGY SYNEY: Tel: (2) 2 1 Fax: (2) 2 RISNE: Tel: () 33 Fax: () 3 PERT: Tel: () 3 2 Fax: () 3 2 EIE: Tel: () 23 1 Fax: () 23 1 NE ZEN: Tel: () Fax: () 23 address: enquiries@linearbearings.com.au ue to continuing development and improvement to our products, specifications are subject to change without notice. ME EERS IN INER MOTION TECNOOGY
2 2 INEX PRECISION STEE SFTS INER SET TYPE SC INER SET TYPE SC-V INER SET TYPE SC-TK OPEN INER SET TYPE SC-TKOPN TNEM INER SET TYPE SC-TK OPEN INER SET TYPE SC-TKOPN INER SET TYPE G INER SET TYPE G-OP FNGE INER SET TYPE MF FNGE INER SET TYPE MF- STNR USINGS SUPER USINGS SFT SUPPORT OCKS FNGE SFT SUPPORT OCKS SFT SUPPORT RIS INER MOTION SIES PROUCT RNGE
3 PRECISION STEE SFTS 3 INUCTION RENE N GROUN vailable as: Solid shafts Stainless steel Tubular shafts Metric and imperial sizes E CUT N MCINE TO YOUR REQUIREMENTS Induction hardened and precision-ground shafts provide the inner race for all ushing bearings. ll shafts are manufactured to extremely close tolerances for surface finish, roundness, hardness and straightness to provide long service life with reduced maintenance. ardness Shafts are made from high quality carbon steel and induction hardened to RC -. eat treatment on specialized equipment assures uniformity of hardness. The minimum depth of hardness is carefully controlled to provide the high load carrying capability of all ushing bearings. iameter ccuracy Shafts are precision-ground to the extremely close diameter tolerance of h. iametral accuracy is an important factor when using all ushing bearings. It assures dependable diametral fit-up when minimum clearance is required. SPECIFICTIONS ardness: RC - Surface Finish: Standard (Ra).um except on machined or annealed surfaces. ength Tolerance: Standard length tolerance on cut-to-length shafts is ±. mm. Special length tolerances are available upon request. Chamfer: Standard chamfer on shaft diameters is 1.mm x º. Other chamfers can be supplied upon request. Tolerances for metric-size steel shafts Shaft h (um) Tolerances for inch-size steel shafts Shaft Ø d Class " (Inch) (mm) (Inch) ¼ / ½ / ¾ ¼ ½
4 INER SET TYPE SC luminium alloy housing Standard ball bushing Sealed lso available as tandem units (2 bearings per housing) S Series atum plane 1 -S1x l C h T 1 TK marking side -S2 1 SC UU SC 1UU SC 2UU SC UU SC 3UU SC UU SC UU Shaft size ø Mounting hole asic Unit eight idth ength position TP ±.2 ±.2 load rating weight c co 1 C S1X l S2 h 1 1 T N N g MX MX MX MX1 MX1 M1X M1X M M M M M N=.kgf
5 INER SET TYPE SC-V Compact aluminium housing 2 mounting holes Standard ball bushing Sealed atum plane 1 M/2 M M/2 2 S1x l h T S2 SC VUU SC 1VUU SC 2VUU SC VUU SC 3VUU SC VUU SC VUU Shaft Mounting hole size eight idth ength position TP ±.2 ±.2 ø MX1 MX MX MX1 MX1 M1X M1X M M M M M asic load rating M 1 1 T N c co 1 S1X l S2 h N g Unit weight N=.kgf
6 INER SET TYPE SC-TK luminium alloy housing Super ball bushing Self-aligning capability Sealed lso available with: Stainless steel or ceramic bearings. or: Tandem version (2 bearings per housing) see page atum plane 1 -S1x l C h T 1 -S2 1 SC TKUU SC 1TKUU SC 2TKUU SC TKUU SC 3TKUU SC TKUU SC TKUU Shaft Mounting hole asic Unit size eight idth ength position TP ±.2 ±.2 load ø C h 1 1 T N c rating co weight 1 S1X l S2 N g MX1 MX MX MX1 MX1 M1X M1X M M M M M ,2 1,2 1, 1, 2, 2,3 3,,2,,1,,23,, N=.kgf
7 OPEN INER SET TYPE SC-TKOPN luminium alloy housing Super ball bushing Self-aligning capability Sealed lso available with: Stainless steel or ceramic bearings or: Tandem version (2 bearings per housing) see page atum plane 1 -S1x l C h T 1 h1 -S2 1 SEE PGE 1 FOR MTCING SUPPORT RIS Shaft Mounting hole asic load Unit eight idth ength size position TP ±.2 ±. rating weight C Co ø 1 C h1 S1X l S2 h 1 1 T N N g SC TKUU OPN SC 1TKUU OPN SC 2TKUU OPN SC TKUU OPN SC 3TKUU OPN SC TKUU OPN SC TKUU OPN Mx1 MX MX MX1 MX1 M1X M1X M M M M M N=.kgf
8 TNEM INER SET TYPE SC-TK Tandem version (2 bearings per housing) luminium alloy housing Super ball bushings Sealed lso available with: Stainless steel or ceramic bearings. atum plane 1 -S1x l C h T 1 -S2 1 Part Number Shaft Mounting hole asic load Unit size eight idth ength position TP ±.2 ±.2 rating eight c co Ø 1 C S1x l S2 h 1 1 T N N g SC TKUU MX SC 1TKUU MX SC 2TKUU 2 1 MX M SC TKUU 1. MX1 M SC 3TKUU MX1 M SC TKUU 1 M1X M SC TKUU M1X M N=.kgf
9 OPEN INER SET TYPE SC-TKOPN Tandem version (2 bearings per housing) luminium alloy housing Super ball bushings Sealed lso available with, stainless steel or ceramic bearings atum plane 1 -S1x l C h T 1 h1 -S2 1 SEE PGE 1 FOR MTCING SUPPORT RIS Shaft Mounting hole asic load Unit eight idth ength size position TP ±.2 ±. rating weight C Co ø 1 C h1 S1X l S2 h 1 1 T N N g SC TK OPN SC 1TK OPN SC 2TK OPN SC TK OPN SC 3TK OPN SC TK OPN SC TK OPN Mx1 MX MX MX1 MX1 M1X MX1 M M M M M N=.kgf
10 1 INER SET TYPE G FET TURESU luminium alloy housing Super ball bushing Self-aligning capability Sealed lso available as tandem units (2 bearings per housing) TG series M /2 ±.2 E2 1 2 d 3 E1 Mx1 ød1 G-1-S d ø ±. ±. 1 E2 E1 d1 M M 1. asic load rating C Co N N 3 Unit weight g 1 G--S M G-1-S M. 3 2 G-2-S 2. M G--S 3. M1 2 G-3-S 3 3. M G--S M G--S M N=.kgf
11 OPEN INER SET TYPE G-OP FET TURES luminium alloy housing Super ball bushing Self-aligning capability Sealed lso available as tandem units (2 bearings per housing) TG-OP series M /2 ±.2 E2 1 2 d 3 Mx1 E1 Mx1 +. ød1 SEE PGE 1 FOR MTCING SUPPORT RIS G-OP--S G-OP-1-S G-OP-2-S G-OP--S G-OP-3-S G-OP--S G-OP--S d ø ±. ±. 1 E2 E1 d1 M M M M M1 M1 M M asic load Unit rating weight C N Co N g N=.kgf
12 FNGE INER SET TYPE MF Compact design Flange mount Sealed Round flange Square flange also available. PC h d2 d1 dr 1 MF Inscribed circle diameter dr tolerance Outer diameter tolerance ength Flange diameter 1 PC Mounting hole d1xd2xh Number of ball rows asic load rating C N Co N MF 1 UU xx.1 33 MF UU xx.1 MF 1 UU xx.1 MF 2 UU x.x.1 3 MF UU x.x.1 MF 3 UU xx.1 2 MF UU x1x.1 MF UU x1x.1 32 Other sizes also available. Please ask for specifications. 1N=.kgf
13 FNGE INER SET TYPE MF- Tandem type (2 bearings per unit) Compact design Flange mount Sealed Round flange Square flange also available. PC h d2 d1 dr 1 MF- Inscribed circle diameter dr tolerance Outer diameter tolerance ength Flange diameter 1 PC Mounting hole d1xd2xh Number of ball rows asic load rating C N Co N MF 1 UU xx.1 MF UU xx.1 MF 1 UU xx MF 2 UU x.x MF UU x.x.1 31 MF 3 UU xx.1 2 MF UU x1x.1 33 MF UU x1x.1 Other sizes also available. Please ask for specifications. 1N=.kgf
14 1 STNR USINGS ll steel outer Resin retainer Sealed both ends Standard ball bushing dimensions vailable as open or closed series lso available: Stainless steel version dr 1 KGUU KGUU KGUU K1GUU K2GUU KGUU K3GUU KGUU KGUU * KUU dr ø *KUU has a steel retainer No. of ball circuits asic Unit Tolerance load rating weight c co tol tol 1 N N g , 2,1,, ,3 1, 2,,2, 1, ,,1 1N=.kgf
15 SUPER USINGS igher load capacities onger travel life Self-aligning capabilities Integral floating seals Standard ball bushing dimensions vailable as open or closed series lso available: Stainless steel version Recommended Tolerance for Shaft O.. and ousing ore. Part Shaft diameter ousing bore number TK TK1 TK2 TK TK3 TK inear earings has the largest range of ball bushings available ex stock. Most brands catered for in both metric and imperial sizes. Contact any of our branches for all your linear motion requirements. TK UU TK 1UU TK 2UU TK UU TK 3UU TK UU dr mm dr ø Tol.(h) µm No. of ball circuits - - / mm 2 2 Tol.() µm / Complete range of ball bushings available Tolerance 1 dr asic load rating Self-aligning 1 in all directions Unit weight tol. tol. 1 N c co N g ±.2 3 ±.2 ±.2 ±.2 ±.2 ± ,2 1, 2, 3,,, 1,2 1, 2,3,2,1,
16 1 TYPE SK TYPE SK1 SK SK1 SK2 SK SK3 SK SK M M M M M M M1 M M M M M M bolt bolt b S Shaft size d I h g g Unit weight Mounting Tightening ±.2 ± ±. 3±. 3±. ±. ±. ±. 2±. 1± M M M M1 M M M1 M E S1 N1 N2 S S d Shaft size g ±.1 Unit weight Tightening bolt atum plane 2 S h d I g b N1 N2 1 S E d S1 S SFT SUPPORT OCKS
17 FNGE SFT SUPPORT OCKS 1 TYPE SF. UMINIUM OY 2-S T G F N mark SF1 SF SF SF1 SF2 SF SF3 SF3* SF* SF* SF* * C ast iron Shaft diameter T F G S (bolt size). (M). (M). (M). (M) (M) (M) (M) (M1) (M1) 1 (M) 1 (M) djusting bolt size M M M M M1 M M Unit weight g V TYPE F. UMINIUM OY S ø ø1 E øs F- F-1 F-2 F- F-3 F- F E S V S ± ± ±.. 1. ± ± ± ±.. 3 Unit weight g 1 3
18 1 SFT SUPPORT RIS igh rigidity ow overall height ight weight aluminium alloy Shaft support Rails are designed to support the shafts on which ball bushings run to prevent them from bending under load. Shaft Support Rails are delivered in ready sections of high dimensional accuracy and are designed to give high rigidity. Their low overall height allows the construction of extra compact linear motion assemblies. d M 1 o o for - o for N O 2 U 2 T/2 T T/2 t V ength O 1 E U ±.1 d V M O 1 U 1 N E t O 2 U M X2 M X2 M X M X3 M1X3 M1X MX M X M X1 M X1 M X1 M X M X M1X3 1 imensions (mm) ole spacing T 1 T
19 INER MOTION SIES 1 luminium alloy housing super ball bushings Twin end support blocks Precision steel shafts ithout rive Unit Particularly smooth running and long service life thanks to Super inear ushings. Oil and moisture proof PU bellows-type protective cover. ubrication points at both sides of the carriage. ith Precision all Screw ssembly ength as desired Tension end enclosure with integral belt tensioning system. elt pulley system with permanently lubricated ball bearings. ide steel-reinforced toothed polyurethane drive belt for extreme stiffness and positioning accuracy requirements. ith Toothed elt rive Slide tables made up to customer requirements. lso available with supported shafts. Open Series.
20 TE INER EGE e ll move you with a unique package of service, components and systems. ith superior service and leading edge technology, inear earings can offer you the best solution to all your linear motion needs. From a single ball bushing to complete linear motion and control components, our fully qualified and experienced in-house engineers support our entire product range. ctuators all screws all screw support bearings all transfer units rakes & clutches - industrial Cam followers Electronic controls Engineering support Full workshop facilities inear bearings inear modules inear sets Miniature bearings Precision gearheads Precision index drives Profile building systems Profile rail guides Rod ends Screwjacks Shafts and accessories Slide tables Spherical bearings Splines Uhing traversing drives Modular slide units Engineering support In-house workshop facilities Quality System Quality Endorsed Company ISO 1 icqec 2 SI Global National ead Office argreaves Street elmont, 1 Ph: NS Unit, Cooper Street Smithfield NS Ph: 2 1 Q 2 eaudesert Road Coopers Plains Q 1 Ph: 31 S Streiff Road ingfield, S Ph: 2 2 VIC - Kilkenny Court andenong South VIC 31 Ph: 3 address: linear@statewidebearings.com.au ue to continuing development and improvement to our products, specifications are subject to change without notice.
Precision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More informationPoints. Precision Positioning Table TU. Variation. Major product specifications With flange
9 0 Precision Positioning Table Ball screw inear Points lide table with high accuracy and high rigidity in a single structure lide table Compact and slim type positioning table with an original U-shaped
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationLinear Motion Slides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics inear Motion Slides The Drive and Control Company The Product Range
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More information1. About Linear Ball Bearing
1. bout inear all MM Specifications M Series Specifications (Standard) M Series Specifications (engten) Ød Ø Ø Ød Ø Ø W W W W INR RING d (m) M4UU 4 2 MUU 1 1.1.. 2.7 21 27 MUU 24 1.1.3 17. 3. 27 41 1 MUU
More informationSNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
More informationClassical Series Timing Belts
Classical Series Timing s Classical Series Timing s are manufacture in 5 pitch sizes, X (/5), ( 3 / ), H ( / ), XH ( / ) an XXH ( / 4 ). Stanar stock lengths an withs are shown below, the XH an XXH Series
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationBall Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented
Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationLinear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.
Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)
More informationC-Lube Linear Way ML Linear Way L ML LWL
-Lube Linear ay ML Linear ay L MLLL -Lube Maintenance ree Series -Lube Linear ay ML ML long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber
More informationMiniature (SEB Type) Tapped-Hole rail Types: Slide guides with clearance holes are standard and tapped holes are available upon request.
Miniature (SE Type) The SE type slide guide is a linear motion bearing in which the ball elements roll along two tracking grooves. This is the smallest and lightest slide guide series offered by Nippon
More informationBall screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
More informationZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
More informationTURNING DISK STEEL CHAINS: MULTIFLEX CHAINS
TUNING DISK STEEL CAINS: Series 878TA MULTIFLEX CAINS 324 327 328 331 878 TA DIVE AND IDLE DISK for sideflexing chains TANGENTIAL SPOCKETS Plain bore Ø 18.. 4 10 Ø18 C M 128 32 337 32 29 190 12789 34 38.
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationTangential Fans Series TW Impeller diameter 150 mm and 200 mm
Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net
More informationMiniature Slide Guide Series with Retained Ball now Offers Complete Selection
Miniature Slide Guide Series with Retained Ball now Offers Complete Selection Wide type of Miniature Slide Guide, providing greater allowable moment, is now available with retained ball structure. Due
More informationLinear Ball Bearings. A Series Self-Aligning Pillow Blocks Flange Blocks Stainless Linear Shafting
inear all earings eries elf-ligning illow locks lange locks tainless inear hafting eries losed and pen inear all earings D or seals add the suffix DD d D 1 etaining Distance ousing Dynamic ing etween o.
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationBacklash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
More informationLINE TECH Linear Modules. Ready to built-in linear modules with drive
Ready to built-in linear modules with drive Anodized profile, produced in extrusion molding method Linear rail guiding system (LM3 LM5) Actuation by ball screw, high-helix lead _ screw or toothed belt
More information1 High precision, high rigidity positioning table
TSHM CTHM 11 116 Precision Positioning Table H Ball screw TSH M Ball screw Slide table inear Way Bed inear Points 1 High precision, high rigidity positioning table High precision, high rigidity positioning
More informationTap Changer Type MHF III Specification, Assembly and Materials
Tap Changer Type MHF III Specification, ssembly and Materials Descriptions General Specifications Remarks available in one, two or three phase applications shaft length available in variable sizes connection
More informationM/60210/M Miniature rotary actuators
M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL
More informationPROCESS FOR SELECTING NB LINEAR SYSTEM
The NB linear system is a linear motion mechanism which utilizes the recirculating movement of ball or roller elements to provide smooth and accurate linear travel. NB offers a wide range of linear motion
More informationShaft Locking Devices
External Shaft ocking evice Available sizes: Page # S 900 Self-centering Exceptional concentricity Suitable for hollow shafts Axial hub position fixe uring clamping etric 14mm to 240mm arger sizes on request
More informationHPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y.
HPG 030 1 2 3 Input Output 1 View M6 ( deep) 0 Ø4 H (2.2 deep) 18.0 M6 ( deep) 0 2 3 M6 ( deep) 2 13.0 4 2.0 18.0 24.0 M Ø12 k6 6 M6 ( deep) M6 ( deep) 3 Eample HPG 030 2 with option motor flange 0 M6
More informationIdentification The specification of C-Lube Linear ay is identified by the identification, which consists of a model code, a size, a part code, a material code, a preload symbol, a classification symbol,
More informationGearhead variations M = Motor attachment gearhead S = Separate version. Reduced specification available on request. Gearhead variations.
Order information TP + 004 TP + 4000 SP + 060 SP + 240 Type code S = Standard A = Optimized mass moment of inertia b) E = Version in ATEX b) F = Food-grade lubrication b) G = Grease b) L = Low friction
More informationGeneral Explanation Ⅲ 1 Ⅲ 2
General Explanation 1 2 Selection Procedure Selection of Linear Way and Linear Roller Way should be considered from the most important required matter to details in order. Typical procedure is shown below.
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationDRIVE-TECHNOLOGY INKOMA - GROUP. SDA - Spindle direct drive actuator. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria
DRIVETECHNOLOGY ALBERTINKOMA GROUP SDA Spindle direct drive actuator Mascinenfabrik ALBERT GmbH Tecnologiepark A Gampern Austria pone: +/(0)0 fax: +/(0)0 email: office@albert.at internet: www.albert.at
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationREDUX WAVE SPRINGS. When Size Does Matter. Now with Metric Sizes. Europe s no 1 spring company
REDUX WAVE SPRINGS When Size Does Matter Now with Metric Sizes Europe s no 1 spring company Order by telephone on 0118 978 1800 www.leespring.co.uk Ask us about free delivery ISO 9001 BUREAU VERITAS Certification
More informationFlow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
More informationLocking Assemblies for use with bending loads
US 07 2014 ocking Assemblies for use with bending loads Partner for performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFEDER POWER TRANSMISSION
More informationTisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationLinear Guides SH Series
inear Guides S Series Ball Slide Models: A, B Front view of A and B types Side view of B type MRO B1 W B 4-M l 1 T MYO K E B 3 W2 W1 Model o. SA SB SA SB S2A S2B SA SB S3A S3B S4A S4B SA SB Assembly Ball
More informationIts modular concept allows to build up a ball valve for any degree of automation and any kind of application
Type 2657...59 DN 10 up to 80 mm; Plastic; 2/2 way dvantages/benefits ntegrated pilot valves, position feed-back and limit switches available Customized system solutions with Burkert valves & sensors With
More informationJTC TOOL. 1Dial Gauge
1ial Gauge ial Indicator is surely utilized at manufacturing sites where dimensional high accuracy is needed to be confirmed. The graduation (1- graduation ) depends on usage and Teclock offers kinds of
More informationIdentification system for short product names. Changes/amendments at a glance. 2 Bosch Rexroth AG OBB omega modules R ( )
Omega Modules OBB 2 OBB omega modules R9990079 (206-05) Identification system for short product names Short product name Example: O B B - 085 - N N - System = Omega module Guideway = Ball Rail System Drive
More informationThe basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.
Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and
More informationDry System (Twin and DR Type Bearings) Lubricated System (Twin Type Bearings) Lubricated System (DR Type Bearings)
This data sheet interacts with PRT2 Catalogue 54-56 Hepcootion No. 3 Load Life Information The load capacity and life expectancy of Hepcootion ring slides, segments and track systems is determined by many
More informationLow Profile Slide Table
Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with
More informationCrossed Roller Bearings
Special Selection & http://www.ikont.eu Official Distributer in Unite Kingom rosse Bearings Unit rackley Way Peartree Lane Duley, West Milans DY UW Tel : 9 / E-mail : uley@goiva-bearings.co.uk for AT-EG
More informationSLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY
SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load
More informationXR Series. Introduction. Design Features. Availability. Applications
Kaydon Bearings Slewing Ring Bearings Catalog 390 Introduction The consists of Kaydon cross roller bearings. They provide a high degree of stiffness and low rotational torque within a minimal envelope.
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationBEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
More informationLoad Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
More informationAE / AER Series. AER Series
AE / AER Series Characteristic Highlights True helical gear design Precision helical gearing increases tooth to tooth contact ratio by over % vs spur gearing. The helix angle produces smooth and quiet
More informationTimken Four-Row Cylindrical Roller Bearings
Timken Four-Row yldrical Roller ears Timken four-row cyldrical roller bears are desed for the riors of daily use applications where moderate and hih speeds, hih radial loads, elevated temperatures and
More informationSLIDE GUIDE SGL TYPE SLIDE GUIDE BLOCK TYPES ACCURACY
SGL YPE he N slide is a linear motion earing utilizing the rotational motion of all elements along four rows of raceway grooves. It can e used in various applications due to its compactness and high load
More informationPOLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section).
A pole wheel on the target shaft is required when using contactless sensors to generate a signal. Often an existing gear wheel can be used but where none is present a special gear, slotted or holed disk
More informationMaintenance Free C-Sleeve Linear Way ML ME MH MUL
Maintenance ree C-Sleeve Linear ay M M MUL CAT-A e aim to be a Technology-Developing company taking customer-need as primary source for the development. ith our original technologies and creativities,
More informationIdentification The of -Lube Linear Roller Way Super MX is identified by the identification, which consists of model code, size, part code, material symbol preload symbol, classification symbol, interchangeable
More informationElectroMechanical Cylinder LEMC
www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More informationR-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02
R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationEdition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions
660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37
More informationROTARY MOTION CONTROL
ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationRail Guide Modular Linear Actuators DSM
Roller Guide Modular Linear Actuators DLM, DLVM Rail Guide Modular Linear Actuators DSM nookindustries.com toll-free (800) 32-7800 25 DLM 20, 60, 200 Linear Motor Drive Specifications Function: This unit
More informationXL-550. Liste de pièces Lista de Piezas Parts List
SINGER is the exclusive trademark of The Singer Company S.à.r.l or its Affi liates. 0 The Singer Company Limited S.à.r.l or its Affi liates. All rights reseved. XL-0 Liste de pièces Lista de Piezas Parts
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More informationSelection of jack size No. 5 Check again with ball screw jack Type J-B. Yes. Set the hand wheel radius if the screw jack is to be used for manual operation. Yes. Yes. Specification Select temporarily the
More informationRodless cylinders Series 1600
Rodless cylinders Series 00 Basic version 0.Ø.stroke.0.M Max. stroke mt.) AL AI RA RB AF TC AM L LA+stroke AH TD AE TA RV Possibility of a single feed cylinder head AI AP AB AC AD TD TE TB AG RT Left head
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationLowPro Series TABLE TOP CHAIN & MODULAR BELT CONVEYORS. Conveyors - Pallet Handling - Aluminium Profile Machine Guarding - Special Purpose Machinery
LowPro Series TABLE TOP CHAIN & MODULAR BELT CONVEYORS Conveyors - Pallet Handling - Aluminium Profile Machine Guarding - Special Purpose Machinery LOWPRO SL SERIES TABLETOP CHAIN CONVEYORS Standard Head
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationNR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
More informationMEMS Project 2 Assignment. Design of a Shaft to Transmit Torque Between Two Pulleys
MEMS 029 Project 2 Assignment Design of a Shaft to Transmit Torque Between Two Pulleys Date: February 5, 206 Instructor: Dr. Stephen Ludwick Product Definition Shafts are incredibly important in order
More informationRevision 1.0, January 2014 MICRONIX USA, LLC
2014 Edition Revision 1.0, January 2014 MICRONIX USA, LLC The information within regarding the MICRONIX USA Product Line and/or any other products and technology owned by MICRONIX USA, LLC are subject
More informationE D D Y C U R R E N T D A M P E R A P P L I C AT I O N D ATA
E D D Y C U R R E N T D A M P E R A P P I C AT I O N D ATA CDA InterCorp CDA InterCorp INTRODUCTION This application manual defines the performance capabilities of CDA InterCorp s Eddy Current Damper Product
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationXL-580. Liste de pièces Lista de Piezas Parts List Copyright SVP Worldwide - All rights reserved
0 Copyright SVP Worldwide - All rights reserved XL-0 Liste de pièces Lista de Piezas Parts List 0-6 0 March 0 A 0 0 6 6 Singer XL-0 Pos Part No Description 0 0 THRUST WASHER 60 MAIN SHAFT WITH BALANCER
More informationSwitches in conformity with ATEX directive
E Switches in conformity with ATEX directive page / General Catalog 09-0 Technical concepts page /9 A B Position switches FD series page / Category Zone Approvals Article code extension G M ATEX category
More informationO-Ring Design Guide REGISTERED QMS. ISD
O-Ring Design Guide ISO 9001 REGISTERED QMS ISD Table of Contents O-Ring Design Guide Hi-Tech Seals Inc. Compound Specifications 3 Machining Specifications 4 O-Ring -Section 4 O-Ring Gland Types 4 ID Stretch/OD
More informationMaintenance Free C-Sleeve Linear Way
U.S. PATTD Maintenance ree C-Sleeve Linear ay M M MUL Maintenance free for,000 km or or years CAT- Printed in Japan 0.0 (SIG Maintenance ree & C-Sleeve Linear ay strives to be a leader in Technology. Our
More informationBlack Granite Surface Plates
Black Granite Surface Plates Surface Plates SURFACE ACCURACY GGG-P-463c. Harder then steel. Retains accuracy for years. Guaranteed repeat reading. unilateral accuracy of plate. Does not rust or corrode.
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationBNA Series. PLENUM FAN with Backward Wheels
BNA Series PLENUM FAN with Backward Wheels BNA Series BNA Series Plenum Fans Backward wheels Kruger Plenum Fans are designed for air handling applications where the fan operates unhoused within a plenum.
More informationANGULAR CONTACT BEARINGS
ANGULAR CONTACT S ANGULAR CONTACT S Angular Contact Bearing Design Angular contact bearings have one ring shouler remove, this may be from the inner or outer ring. This allows a larger ball complement
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationH a r m o n i c P l a n e t a r y
H a r m o n i c P l a n e t a r y HPG Series Planetary Gearhead Total Motion Control P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Harmonic Drive LLC is the world s largest manufacturer of
More informationLT130LDGS Single table
T0DGS Single table K(mounting hole: pitch) 0 30 S(stroke) 0 0 4-M Depth 9( 1 ) Hole for n-m4 3. 43 imit 87. 1 K n T0DGS- 240 240 80 0 8 7.6 T0DGS- 7 7 1 000 80 840 16. T0DGS-0 1 1 480 80 24 19.4 T0DGS-1680
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationHigh-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet
High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N KSB Aktiengesellschaft All rights reserved. The contents
More informationNORMACLAMP Hose Clamps
NORMACLAMP NORMACLAMP NORMACLAMP TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features NORMACLAMP TORRO hose clips are specially suitable for applications under high mechanical
More information