Tisa Enterprises. The Clamping Professionals
|
|
|
- Anis Watson
- 5 years ago
- Views:
Transcription
1
2 Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0 x 0 M. T1-FSC-0 x 0 M. T1-FSC-0 x 0 3. T1-FSC-0 x T1-FSC-3 33 x 0 M 4. T1-FSC x M.0 T1-FSC-3 x T1-FSC-3 x T1-FSC-0 x U Clamp Due to openness of the slot, clamp can be inserted/ removed without disturbing the clamping system : T1-UC IS: 3-4 D x L A B T1-UC- x 0. T1-UC-1 x 1 0. T1-UC-0 x 0 0. T1-UC-1 x 0 M 1. T1-UC-1 x 0 M 1. T1-UC-0 x 0 5 M 1. T1-UC-0 x 0 M 3.00 T1-UC-0 x 0. T1-UC-0 x 0.5 T1-UC-3 33 x M 3. T1-UC x 3 4 M 4. T1-UC x 0 4 M.05 T1-UC x 0 4 M. T1-UC-0 x T1-UC-0 x T1-UC-0 x
3 Slotted Clamp : T1-SC IS: - 5 D x L A B K S T1-SC- x 0. T1-SC-15 x 5 0. T1-SC- x 0. T1-SC-1 x 1 0. T1-SC-1 x 1 M 0.5 T1-SC-5 x 5 M 1.00 T1-SC-0 x 0 M 1. T1-SC-0 x 0 M 1. T1-SC-0 x 0.5 T1-SC- x 3. T1-SC-3 33 x 0 M 4. T1-SC x 0 5 M 5. Serrated Strap Clamp Applications: On machines for work holding in combination with Universal Serrated Blocks (Type: T3-USB) for instant height adjustment. : T1-SSC D x L A B K S DIN: 3 Z T1-SSC- x 0. T1-SSC- x 0. T1-SSC- x 0. T1-SSC-1 x 1 0. T1-SSC-1 x 1 M 0.0 T1-SSC-1 x 0 M 1. T1-SSC-0 x 0 M 1. T1-SSC-0 x 0 M. T1-SSC-0 x 0. Goose Neck Clamp : T1-GNC IS: - D x L A B H K S T1-GNC- x 0. T1-GNC-1 x 1 0. T1-GNC-1 x 0 4 M 1. T1-GNC-0 x 0 M. T1-GNC-0 x T1-GNC-3 33 x 0 1 M 5. T1-GNC x 3 1 M.0 T1-GNC-0 x
4 Press Tool / Milling Clamp Material Clamping Pad: High tensile S.G. Iron Enamelled in Flame Red Colour : T1-PTMC Suitable for T-Slot Clamp Width Length Range T-Bolt type in kg (Full Set) T-Bolt, HN: Medium Carbon Steel, Hardened and tempered to - HRC and Chemically Blackened T1-PTMC- T1-PTMC- T1-PTMC T-TB- T-TB- T-TB Swivel Nut: Medium Carbon Steel Chemically Blackened T1-PTMC- T1-PTMC T-TB-1 T-TB T1-PTMC T-TB-1. Applications : T1-PTMC T-TB On Presses for holding tools, dies - On Machine beds for holding flat components, castings. T1-PTMC- T1-PTMC- T1-PTMC T-TB-0 T-TB- T-TB Press Mould Clamp Material: Clamp, Fulcrum and Saddle: High tensile S G Iron, Enamelled in Flame Red colour. T-Bolt, Flanged Hex Nut: Medium Carbon Steel Hardened and tempered to - HRC and Chemically Blackened. : T1-PMC T-Slot in mm D x S L x B A K Clamping Range in mm T -Bolt Size. Applications : On Presses, Plastic Moulding machines, Milling and Drilling Machines. T1-PMC-1/ T1-PMC-1/ T1-PMC-1/ T1-PMC-/ T1-PMC-/ x 1 0 x 0 - x 5 0 x x x 1L x x 1L M x x 1L M x x 0L M x x 0L Note: T1-PMC is supplied with T-Bolt as standard. Clamping Stud is optional. T1-PMC-/ T1-PMC-3/ T1-PMC-3/ x 1 x M x x 0L x x 0L x x 0L
5 Quick Clamp Material: Clamp and Saddle: High tensile S G Iron, Enamelled in Flame Red colour. T-Bolt, Flanged Hex Nut: Medium Carbon Steel Hardened and tempered to - HRC and Chemically Blackened. Applications : On Presses, Plastic Moulding machines, Milling and Drilling Machines and CNC Machining Centres. : T1-QC T-Slot in mm. Note: T1-QC is supplied with T-Bolt as standard. Clamping Stud is optional. T1-QC-1/ T1-QC-1/ T1-QC-1/ T1-QC-/ T1-QC-/ T1-QC-/ T1-QC-3/ T1-QC-3/ DxS LxB A K Clamping Range in mm x 5 0 x 0 - x 5 x 1 0 x 5 x T -Bolt Size x x 1L 1. x x 1L 1. M x x 1L 1. M x x 0L.00 M x x 0L. M x x 0L. x x 0L 3. x x 0L Mould Clamp with Heavy Support Bolt Mould Clamp offers counter height adjustment by heavy duty support bolt with hex, round base and lock nut. Material: Medium Carbon Steel, Hardened and tempered to - HRC and Chemically Blackened Applications : Plastic Moulding machines Note: T1-MCH is supplied with the Clamp, Support Bolt and Lock Nut. T-Bolt/Stud, Hex Hi-Nut and Washer are optional. : T1-MCH Bolt Size A B DxL S T K H E x 1 M T1-MCH-1S T1-MCH-1L M x L x M x 0L T1-MCH-0S x 0 M M x L M 1. x T1-MCH-0L M x 0L 1. T1-MCH-0S M x L 1. M x 0 0 M T1-MCH-0L x M x 0L T1-MCH-0S 1. x L M x 0 T1-MCH-0L T1-MCH-0S M x 0 0. x x L T1-MCH-0L 05 Support Bolt GxJ Hex A/F x Base. x L. x x L T1-MCH-0 M x 0 1 x L x 3..0 T1-MCH- x 0 5 M M x L x 5.00
6 Double Ended Clamp : T1-DEC IS: -5 D x L A B T1-DEC- x 0. T1-DEC-15 x 5 0. T1-DEC- x 0. T1-DEC-1 x 1 0. T1-DEC-1 x 1 M 1.00 T1-DEC-1 x 0 M 1. T1-DEC-0 x 0 M 1. T1-DEC-0 x 0 M 3. T1-DEC-0 x 0 3. T1-DEC-0 x T1-DEC x 0 M 4. T1-DEC-3 33 x 0 M 5.00 T1-DEC x 3 M. Plain Clamp : T1-PC IS: 1-5 D x L A B T1-PC- x 0. T1-PC- x 0. T1-PC- x M 0.5 T1-PC-1 x 1 M 1. T1-PC-0 x 0. T1-PC x 0 M 4. Flanged Hex Nut : T-FHN IS: - T-FHN- T-FHN- T-FHN- T-FHN- T-FHN-3 T-FHN- T-FHN-5 T-FHN- D1 D M A S M M M
7 Forged T-Bolt to. Grade as per IS: -0 (Part III) and Chemically Blackened. Note: We can manufacture non-standard T-Bolts in.,. and. Grade as per given drawings on request. : T - TB IS: - T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB- T-TB-15 T-TB- T-TB- T-TB-1 T-TB-1 T-TB- T-TB- T-TB- T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB- T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB- T-TB- T-TB- T-TB-1 T-TB-1 T-TB-1 T-TB-1 ØD M M M M M M M M M M M M M M T-SLOT Size T L K L1 A x B x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0.0 x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x 0. x x x x x x x x x x x x x x x Wt. kg : T - TB IS: - T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB-3 T-TB- T-TB- T-TB-1 T-TB-0 T-TB-0 T-TB-0 T-TB-3 T-TB- T-TB-1 T-TB- T-TB- T-TB- T-TB-3 T-TB-0 T-TB- T-TB-1 T-TB- T-TB- T-TB- T-TB-3 T-TB- T-TB-1 T-TB-3 T-TB-3 T-TB-3 T-TB-3 T-TB-3 T-TB-4 T-TB-0 T-TB-4 T-TB-3 T-TB-0 ØD M M M M M M M M M M M M M M M M M M M M T-SLOT Size T L K L1 A x B x x x x x x x x x x x x x x x x x x x x x x x x x x Wt. kg
8 T Nut : T-TN IS: - T-TN- T x ØD x M A K B x L x 0.0 T-TN- x x 0.0 T-TN- x x 0.0 T-TN- x x 0.0 T-TN- x x 0.0 T-TN- x M x 0.0 T-TN- x M x 0.1 T-TN- x M x 0.0 T-TN- x M x 0.5 T-TN- x M x 0.5 T-TN- x M x 0. T-TN- x 0.3 T-TN- x M T-TN- x 5 x Hex Hi-Nut : T-HN DIN: 3 T-HN- ØD x A x S 0.0 T-HN- x 0.0 T-HN- x 0.0 T-HN- M x 0.0 T-HN- Mx 0.1 T-HN- x 0.5 T-HN- M x T-HN-34 x Extension Nut : T-EN DIN: 334 T-EN- ØD x A x S 0.0 T-EN- x 0.0 T-EN- x 0.0 T-EN- M x 0.1 T-EN- M x 0. T-EN- x 0.0 T-EN-0 M x T-EN- x 1.4 0
9 Rhombus T-Nut : T-RTN T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T-RTN- T ØD A K B T-RTN- 0.0 M M M M M M T-RTN- M Clamping Stud to. grade as per IS : 0 (Part III) and Chemically Blackened. Note: Other sizes/grades available on request. : T-CS IS: - 1 T-CS- T-CS- T-CS-3 T-CS- T-CS- T-CS- T-CS-3 T-CS- T-CS- T-CS-1 T-CS- T-CS-13 T-CS- T-CS- T-CS-1 T-CS-1 T-CS- T-CS-3 T-CS- T-CS- T-CS-1 ØD x L x x x 3 x x x x 3 x x x 1 x x 3 x x x 1 x 0 x 0 M x 3 M x M x M x 1 L1 L : T-CS IS: - 1 T-CS-0 T-CS-0 T-CS-0 T-CS- T-CS- T-CS-1 T-CS-0 T-CS-0 T-CS-0 T-CS-3 T-CS-0 T-CS-0 T-CS- T-CS-1 T-CS- T-CS- T-CS- T-CS-3 T-CS-0 T-CS-0 ØD x L M x 0 M x 0 M x 0 M x M x M x 1 M x 0 M x 0 M x 0 M x 3 M x 0 M x 0 x x 1 x 0 x 0 x 0 x 3 x 0 x 0 L1 L : T-CS IS: - 1 ØD x L L1 L T-CS-1 T-CS-0 T-CS-0 T-CS-0 T-CS-3 T-CS-0 T-CS-0 T-CS-0 T-CS-3 T-CS-3 T-CS-3 T-CS-3 T-CS-3 T-CS-3 T-CS-0 M x 1 M x 0 M x 0 M x 0 M x 3 M x 0 M x 0 M x 0 x 0 x 0 x 0 x 3 x 0 x 0 x
10 Plain Washer ( Thick ) Material: Low carbon steel, Case hardened to - HRC and Chemically Blackened. : T3-PW-DIN DIN: 3 T3-PW-DIN- T3-PW-DIN- T3-PW-DIN- T3-PW-DIN-M T3-PW-DIN-M T3-PW-DIN-M T3-PW-DIN- T3-PW-DIN-M T3-PW-DIN- A D B Spherical Washer with Conical Seat Material: Low carbon steel, Case hardened to - HRC and Chemically Blackened. : T3-SWCS IS: - T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- T3-SWCS- SIZE d1 d h1 d3 d4 h M M M C Washer Material: Low carbon steel, Case hardened to - HRC and Chemically Blackened. : T3-CWN IS: 1 - T3-CWN- T3-CWN- T3-CWN- T3-CWN-M T3-CWN-M T3-CWN- T3-CWN-M T3-CWN- A D B A1 T
11 Supporting Height Plates Material: Rolled sheet, Flattened and Chemically Blackened. Applications: Desired clamp support height achievable by swinging of top plates in steps of mm/4mm. Blocks of the same group can be stacked one above another to achieve increased height. Precise height adjustment is possible with the help of smooth sliding block (T3-SSB) Note: For higher sizes, the base is broadened for stability. B x L x T : Plate size B x C : Clamp rest area : T3-SHP T3-SHP-4 x T3-SHP-4 T3-SHP-4 T3-SHP-4 T3-SHP-41 T3-SHP- T3-SHP- T3-SHP- T3-SHP-0 T3-SHP- T3-SHP-00 T3-SHP- T3-SHP- T3-SHP-W T3-SHP-W00 T3-SHP-W T3-SHP-W A B x L B x C T x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Universal Serrated Block Applications: Combinations of 3 sizes in each group offers instant height adjustment for work support. Also recommended for use along with serrated strap clamp (Type: T1-SSC) : T3-USB Height Adjustment A B x L Minimum Maximum T3-USB-001 T3-USB-00 T3-USB-003 T3-USB-004 T3-USB-005 T3-USB-00 x 33 x x 1 x 33 x x Self Aligning Ball Element Material: Ball: Hardened and tempered steel Body: Toughened Steel, Chemically Blackened Features: The self aligning serrated ball set into the socket adjusts to the plane of the working surface while clamping. : T3-SBE D1 D D3 S L H T3-SBE- T3-SBE- T3-SBE- T3-SBE- T3-SBE- T3-SBE- T3-SBE- M M M
12 Smooth Sliding Block The Smooth Sliding Block is a device for fine and stepless height adjustment. Material: Medium Carbon Steel, Top slide hardened and Tempered to - HRC and Chemically Blackened Applications :SSB is recommended for use with Supporting Height Plates (T3-SHP). The SHP offers height adjustment in steps of mm/4mm and the SSB offers stepless height adjustment to precisely desired heights. : T3-SSB Size in mm B x H x L Height Variation in mm use with T3-SHP of type Plate width of T3-SHP T3-SSB- x x 3, 0, 0. T3-SSB- x x 5 00,, 0. T3-SSB- x x 5 4, 4, T3-SSB- x x 5 5 W, W00 W, W 1. T3-SSB-34 x x 5 5 4, 41, 4 1. Smooth Sliding Block - Levelling Jack B Light Duty L Heavy Duty H 0=5 ~ Material: Body and Slides: Hi Tensile S.G. Iron Operating Screw: Alloy Steel. Grade Applications : Heavy Work Loading, Precise Height Adjustment : T3-SSB-LD T3-SSB-LD-0 T3-SSB-LD-03 T3-SSB-LD-05 T3-SSB-LD- L x B x H 1 x 0 x 1 x 0 x x 5 x 1 x 5 x 1 Height Variation in mm Load Capacity In Tonnes 3 5 (approx.) 0 : T3-SSB-HD Height Variation in mm Load Capacity In Tonnes T3-SSB-HD- 0 - Note: Handle provided for easy lifting of the Jack (approx.) #/1, th Cross, Byatarayanapura, Mysore Road, Bengaluru: 50, Karnataka, India Tel : +1 4 / 1 Fax: tisaenterprises@gmail.com Website:
ENGINEERING DRAWINGS MENG 102 CLASSWORK SHEETS
ENGINEERING DRAWINGS MENG 2 CLASSWORK SHEETS Department of Mechanical Engineering Faculty of Engineering King Abdulaziz University Jeddah, Kingdom of Saudi Arabia FALL 3 K.A.U MENG2 Mechanical Engineering
G-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
Black Granite Surface Plates
Black Granite Surface Plates Surface Plates SURFACE ACCURACY GGG-P-463c. Harder then steel. Retains accuracy for years. Guaranteed repeat reading. unilateral accuracy of plate. Does not rust or corrode.
PR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
SGF. The metric thread forming connection
SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,
Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
Wenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity
VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing
Features of the Jergens Zero-Point Mounting System
Features of the Jergens Zero-Point Mounting System Typical applications for the Jergens Zero-Point System: 1.36 ZERO POINT MOUNTING SYSTEM Pull Studs and Engagement Screws Pages 1.42-1.43 Clamping Plates
SNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
Van Beest offers a wide range of turnbuckles, i.e.:
Turnbuckles Applications Turnbuckles are normally used for rigging or tensioning of wires, ropes, rods etc. Turnbuckles are designed for straight or in-line rigging, tensioning or lashing only. Range Van
Section Installation accessories. > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series
Section > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series 22 23 > CABLE GLANDS WITH DEVICE TO PREVENT ANY UNSCREWING UNION Series B (*) IP8 (1 bar) C A in mm A B
Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
CV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
9: COTTER PINS 9: COTTER PINS COTTER PINS COTTER PINS /6" COTTER PINS 9-000 9-00 9-00 9-003 9-00 9-006 /6 X / /6 X 3/ /6 X /6 X - /6 X -/ /6 X 0 0 0 0 0 0 /6" COTTER PINS 9-08 9-0 /6 X /6 X 0 0 " COTTER
Compendium Screw Jacks
Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories
PARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
Precision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
Configurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
HEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
STEEL. General Information
General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate
D.B.Kawadkar 1, Dr.D.V.Bhope, 2 S.D. Khamankar 3
Evaluation of Stress Concentration in Plate with Cutout and its Experimental Verification D.B.Kawadkar, Dr.D.V.Bhope, 2 S.D. Khamankar 3 Student, IV Semester, M.Tech (CAD/CAM) Mechanical Engineering Department,
Peerless Tooling Components
087 LEAF Leaf ONLY for 4-100007087..K.E.Clamping Unit, Non-returnable NO DISCOUNTS 127.35 1-1/2"-4 TK Tail Knob KT-16B..w/Acme Thread 63.50 1-1/2"-6 TK Tail Knob KT-16B..w/Tapped Thread 60.85 1-1/4"-7
Metal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
Load Washers. Force kn until kn. Type 9101A A
Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated
Welcome to where precision is. Large Ball Screws Diameter mm
Welcome to where precision is. Large Ball Screws Diameter mm Large Ball Screws Diameter mm This section includes nuts with standard dimensions per ISO 8 / DIN 1. In most cases, there is a choice of three
Hilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
HT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
BEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
WELCO VALVE. Cast Steel & Pressure Seal Swing Check Valves.
WECO VAVE Cast Steel & Pressure Seal Swg Check Valves www.cnvalveco.com Swg Check Valve, BB, CS Design The cast steel check valves are designed and manufactured to provide maximum service life and dependability.
Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
Load Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
OPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX
OPERATING INSTRUCTIONS ROTOKLICK MK 150 MULTIKLICK MK 150 MULTIDEX Type: Drehfutter Type: Wippe Type: Traverse Type: Würfel Haff & Schneider GmbH & Co. OHG Obere Wank 2 D-87484 Nesselwang www.haff-schneider.com
AF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
Instruction Manual. Omegon EQ-500 Equatorial Mount English version Rev A
Instruction Manual Omegon EQ-500 Equatorial Mount English version 10.2014 Rev A Instruction Manual Omegon EQ-500 Equatorial Mount Congratulations on the purchase of the new Omegon EQ-500 Equatorial Mount.
PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
Amphenol. Amphenol-Tuchel Electronics GmbH. Series C 146 Heavy Duty Connectors Core Programme
Amphenol Amphenol-Tuchel Electronics GmbH Series C 146 Heavy Duty Connectors Core Programme The Company General information These connectors are designed and produced in conformity with the voltage directive
/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
7 Revised AM001 Rev. 01/17
Spare Parts Price Book The Spare Parts Price Book will be used for procuring replacement parts under WMATA s micro purchasing method. While the Spare Parts Price Book is a mandatory submission for your
Mil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
Instruction for erection and use and examination report for the heavy-load support column. RUX-VS 500 with jack RUX-VS 500 with jack mit Absenkkeil
Instruction for erection and use and examination report for the heavy-load support column RUX-VS 500 with jack RUX-VS 500 with jack mit Absenkkeil Edition: January 2007 RUX GmbH Phone +49 2331 4709-0 Fax
STANDARDISED MOUNTINGS
STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low
Uniclass L4181. EPIC D181 CI/SfB. 11th edition
Uniclass L4181 EPIC D181 CI/SfB (31.59) Xt7 11th edition recess leather cabinet handles recess leather cabinet handles CNC machined solid brass recessed with flush fitted bonded bridle leather Custom lengths
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
product manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
RYOBI 10 in. TABLE SAW MODEL NUMBER BTS21
0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE
LOW PROFILE TRANSFERS
LOW PROFILE TRANSFERS PARTS CATALOG 1 INDUSTRIAL DRIVE PO BOX 0 SWIFT CURRENT, SASKATCHEWAN, CANADA SH 0L0 PHONE:.66. (NORTH AMERICA) FAX: 06.. WEBSITE: HTTP://WWW.BATCOMFG.COM EMAIL: SALES@BATCO-REM.COM
The Rotation Stabilizer Used For A Gravity. Detector With MAB25 Encoder In DRIACS-G2 System
The Rotation Stabilizer Used For A Gravity Detector With MAB25 Encoder In DRIACS-G2 System JH1KRC Mike Watanabe, JA6XED Hisao Tsukamoto 2012 International EME Conference, Cambridge, U. K. Abstract To detect
IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Surface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
Zero-point clamping. Changeover in seconds! SAFE. patented collet lock
Zero-point clamping Changeover in seconds! SAFE patented collet lock Zero-point clamping since 1995 AG Company headquarters in Dübendorf Switzerland AG Werkzeug- und Spanntechnik Im Schossacher 17 CH-8600
Spanners. Slogging spanners flat ring type Slogging spanners flat open end type 126. Podger spanners open end type 127
10 Slogging spanners flat ring type 124-125 Slogging spanners flat open end type 126 Podger spanners open end type 127 Podger spanners ring type 128 Ratchet podger spanners 128 Flat spanners single open
Commercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
E Service E-Series Padlock seires PadlockManual No. Part No. Part No. Part
E-Series Padlock E Service seires Manual Padlock 0 No. Part No. Part No. Part Padlock body Locking plate Ball bearing 0 Shackle Bumper 0 Socket head screw Mx0 Activator cam Identification plate Spring
Mounting kits for insulation of power transistors
ounting kits for insulation of power transistors tel. 0..6.6.6 www.elitaliaweb.it fax 0.6.6.0.09 info@elitaliaweb.it ST STS ST 0 STS 0 for transistor TO TO TO 0 TO 0 version with mica wafer S with silicone
2D - STRIP ANCHOR LIFTING SYSTEM
2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL
Forces in Action Past Paper Questions
Forces in Action Past Paper Questions Q1. The diagram shows a simple hydraulic jack. The jack is designed to lift a large weight using a much smaller force. (a) Complete the following sentence. A hydraulic
Connector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
Spare parts list UC-S
Spare parts list UC-S Contents Water inlet and tank heating Water softener Water drain, Mediamat Cyclo Circulating pump Wash + rinse; bottom Wash + rinse; top Boiler Dosage Panelling Cover plate, electrical
TOTAL PRICE: See Schedule 6.0-1
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Falls One way Plows Nose height 30 Discharge height 60 Plow throat depth from vertical to deepest point 24 Plowing angle 33 Moldboard
6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW
Price quote for: 6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
INTRODUCING HORIZONTAL
i n t r o d u c t i o n. INTRODUCING HORIZONTAL A W I D E R A N G E O F PA N E L S, S YS T E M C O M P O N E N T S A N D A C C E S S O R I E S TO C O M B I N E F O R A W E L L D E S I G N E D S E L L I
EUROMASTER HYDRAULIC PRESSBRAKES
EUROMASTER HYDRAULIC PRESSBRAKES EUROMASTER HYDRAULIC PRESSBRAKES 02_ EUROMASTER Euromaster 50250 The Euromaster has been developed as a modern pressbrake with electronic levelling and depth control Synchro
台灣黑馬牌校正器類 CALIBRATOR METROLOGY
G1 G2 G3 Multi-functional Length Calibrator Calibration Function: All kind of caliper, micrometer, height gauge, dial indicator, bore gauge, and other measuring application. Model No. Calibration Range
Air distribution systems. Adjustable radial outlet RA-V...
Air distribution systems Adjustable radial outlet RA-V... DS E 0.2013 Construction design Preliminary remarks KRANTZ KOMPONENTEN has developed its wellknown, successful radial outlet into an adjustable
THE LOSMANDY G-11 MOUNT
Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable
CTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
DISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
Xinxiang Degong Machinery Co.,Ltd. CRANE DRUM catalog
CRANE DRUM catalog Structure of wire rope drum Benefits A significant increase in the life of the rope drum Reduced wire rope expense Less downtime Reduced maintenance costs Safe elimination of welds and
Schlüter -KERDI-SHOWER. System components for floor level showers
Schlüter -KERDI-SOWER System components for floor level showers Schlüter -KERDI-SOWER Schlüter -KERDI-SOWER is a modular system for the construction of floor level showers with ceramic and stone tiles.
D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s
D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s 1. Design of various types of riveted joints under different static loading conditions, eccentrically loaded riveted joints.
Hilti North America Installation Technical Manual Technical Data MI System Version
MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in
Blizzard. Outdoor. Projector Enclosures 5-15K. Fourth eneration. Projector Enclosures
G4 5-15K G4 Fourth eneration is the world s most popular outdoor projector enclosure for permanent installation in any climate, for video mapping, outdoor attractions, advertising and outdoor movies. comes
AE302,ME302,DAE14,DME14
AE302,ME302,DAE14,DME14 III SEMESTER DIPLOMA EXAMINATION, JANUARY-2013 MANUFACTURING TECHNOLOGY-I Time: 3 Hours Max. Marks: 75 GROUP A : Answer any three questions. (Question No. 1 is compulsory) Q.1 What
BETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
Backlash-free Torque Limiting Clutches
ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs
Krantz Components. Twist outlet DD-N... for ceiling installation. Air distribution systems
Krantz Components Twist outlet DD-N... for ceiling installation Air distribution systems DS E 0. Twist outlet Preliminary remarks and construction design Preliminary remarks Twist outlets for ceiling installation
Pneumatic Universal. Actuator MOTORIZED VALVES USE TECHNICAL FEATURES OF THE ACTUATOR. Data sheet
Data sheet. - 8 USE The motorized valve is specifically used for the interception and regulation of fluids in: systems using alternative energy industrial systems in general using hot and cold fluids automation
DMHP3(4)L(T)2A00 Series
STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End
CONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P.
EMER-FLEX COUPLING CONTENTS INDEX PRODUCT FEATURES PRODUCT STRUCTURE PRODUCT APPLICATIONS PRODUCT SELECTION MODEL LIST NEF-HUB NES Series P. 2 P. 3-4 P. 5-6 P. 7-8 P. 9- P. P. 2 P. 3-4 NEF Series Spacer
Ballistic pendulum Operating Instructions Fig. 1: Ballistic pendulum SAFETY PRECAUTIONS
R Ballistic pendulum 11229.00 PHYWE Systeme GmbH & Co. KG Robert-Bosch-Breite 10 D-37079 Göttingen 6 3.8 3.7 3.6 3.5 Phone +49 (0) 551 604-0 Fax +49 (0) 551 604-107 E-mail info@phywe.de Internet www.phywe.de
q Icon TM Backs (Low, Mid, Tall, Deep ) $ q Evolution TM Backs (Regular, Tall, Deep ) $
Distributed in Canada by 49 Bespoke, Inc. 51 Caldari Road, Units 6-7B Concord, ON L4K 4G3 Phone: (866) 827-4548 Fax: (877) 731-7745 sales@kimobility.ca www.kimobilty.ca Company: Account Number: Date: q
EX-EMERGENCY LIGHT FITTINGS
EX-EMERGENCY LIGHT FITTINGS nllk 0...N 1-36 W Plastic version for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 N are conform to the requirements of the ATEX-Directive
3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA
ug type butterfly valve in double-eccentric construction. Reliable sealing even with extreme temperature and pressure conditions. TECHNICA DATA Nominal diameter: 0 larger nominal diameter on request Face-to-face:
WT HENLEY POLYMERIC RAILWAY INSULATOR CHART MK 1 RANGE
WT HENLEY POLYMERIC RAILWAY INSULATOR CHART MK 1 RANGE (drawing) CATALOGUE No. 56145-38 ( 73813 ) A23 091/000388 ) 091/012547 56145-39 ( 73814 ) A26 091/002157 ) 091/012540 56145-40 ( 73815 ) A686 091/000406
Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction
Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260
Section 8 Column radiators
Section s Description Connections Standard without built-in valve -or- Version with built-in valve Air vent, Drain Fixing and mounting Pressure versions, Fittings, Surface finishes, Special versions eat
NORMACLAMP Hose Clamps
NORMACLAMP NORMACLAMP NORMACLAMP TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features NORMACLAMP TORRO hose clips are specially suitable for applications under high mechanical
External Micrometers. C-1
External Micrometers www.tesatechnology.com C-1 External Micrometers Precision Measurement Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented
Type M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
Vishay Dale - Milwaukee Resistor EN Series - Dynamic Braking Resistors and Load Banks
MODEL ENCLOSURE TYPE ENCLOSURE SIZE EN Series - Dynamic Braking Resistors and Load Banks EN20A4B2K004R00N00 EN20-A1-RB 2K00 4R00 N 0 EN23B4B8K004R00Y10 EN23-B4-RB-1 8K00 4R00 Y 1 RESISTOR TYPE SIZE ( watt
FAVIMAT (AI)ROBOT2 FAVIGRAPH. Automatic Single-Fibre Testers
FAVIMAT (AI)ROBOT2 FAVIGRAPH Automatic Single-Fibre Testers Single-Fibre Testers FAVIMAT and FAVIGRAPH The FAVIMAT testing methods Testing and evaluation of a wide range of fibre properties are essential
FLENDER drives Fundamental Principles of Mechanical Engineering
FLENDER drives Fundamental Principles of Mechanical Engineering Technical Handbook Technical Drawings Standardization 2 Physics 3 Mathematics / Geometry 4 Mechanics / Strength of Materials 5 Hydraulics