Advanced Monolithic Systems
|
|
|
- Joan Shepherd
- 5 years ago
- Views:
Transcription
1 Advanced Monolithic Systems FEATURES ± mv (±.%) max. initial tolerance (A grade) Operating Current µa to ma Low Voltage Reference.5 Max..6Ω Dynamic Impedance (A grade) Low Temperature Coefficient.5V Device and Adjustable Device also available AMS85.5 and AMS85 series, respectively AMS85.5 and AMS85 series. AMS85./ MICROPOWER VOLTAGE REFERENCE DIODE APPLICATIONS Battery Powered Systems Instrumentation A/D, D/A Converters Temperature measurement Current sources Notebook/Personal Computer Monitors/ VCR/ TV Pagers RoHS compliant GENERAL DESCRIPTION The AMS85./ are twoterminal micropower bandgap voltage reference diodes. They feature a very low dynamic impedance and good temperature coefficient, operating over a µa to ma current range. Onchip trimming is used to provide tight voltage tolerance. Since the AMS85./ is a bandgap reference, uses only transistors and resistors, low noise and good longterm stability result. Careful design of the AMS85./ has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the AMS85./ makes these reference diodes useful for micropower circuitry. These voltage references can be used to make portable meters, regulators or general purpose analog circuitry with battery life approaching shelf life. Further more, the wide operating current allows it to replace older references with a tight tolerance part. The AMS85. is operational in the full industrial temperature range of C to 85 C while is operating over a C to 7 C temperature range. The AMS85./ are available in TO9, SO8 and SOT89 packages. ORDERING INFORMATION: TOL. PACKAGE TYPE OPERATING TO9 8 LEAD SOIC SOT89 TEMPERATURE RANGE ±mv AMS85.AN AMS85.AS AMS85.AL to 85 C ±mv AMS85.BN AMS85.BS AMS85.BL to 85 C ±5mV AMS85.CN AMS85.CS AMS85.CL to 85 C ±mv AN AS AL to 7 C ±mv BN BS BL to 7 C ±5mV CN CS CL to 7 C
2 AMS85./ ABSOLUTE MAXIMUM RATINGS Reverse Current ma Storage temperature 55 C to 5 C Forward Current ma Soldering information (5 sec) 65 C Operating Temperature Range AMS85. C to 85 C C to 7 C ELECTRICAL CHARACTERISTICS Electrical Characteristics at I R = µa, and T A = 5 C unless otherwise specified. Parameter Reverse Breakdown Voltage (Note ) Reverse Dynamic Impedance (Note ) Reverse Breakdown Voltage Change with current (Note ) Conditions I R µa AMS85A. AMS85B. AMS85C V I R µa, f =Hz..6 Ω µa I R ma ma I R ma Units mv Min. Operating Current (Note ) µa µa Wide Band Noise (Note 5) Temperature Coeff. (Note 6) Long Term Stability (Note 5) I R µa, Hz f khz T A =5 C±. C T = Hr µv ppm/ C ppm ELECTRICAL CHARACTERISTICS Electrical Characteristics at I R = µa, and T A = 5 C unless otherwise specified. Parameter Reverse Breakdown Voltage (Note ) Reverse Dynamic Impedance (Note ) Reverse Breakdown Voltage Change with Current (Note ) Conditions I R µa AMS85A. AMS85B. AMS85C V I R µa, f =Hz..6 Ω µa I R ma ma I R ma Units mv Min. Operating Current (Note ) µa µa Wide Band Noise (Note 5) Temperature Coeff. (Note 6) Long Term Stability (Note 5) I R µa, Hz f khz T A =5 C±. C T = Hr µv ppm/ C ppm
3 AMS85./ Note : Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Note : For elevated temperature operation, T j max is: AMS85 AMS85 5 C C Thermal Resistance TO9 SO8 SOT89 ϕ JA (junction to ambient) 7 C/W (.5 leads) 65 C/W 6 C/W Note : Parameters identified with boldface type apply at temperature extremes. All other numbers apply at T A = T J = 5 C. Note : Guaranteed and % production tested. Note 5: Guaranteed but not % production tested. These limits are not used to calculate average outgoing quality levels. Note 6: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating T MAX and T MIN, divided by T MAX T MIN. The measured temperatures are C, 5 C, 7 C, 85 C. PIN CONNECTIONS TO9 8L SOIC SOT89 Plastic Package (N) SO Package (S) (L) 8 N/C N/C N/C N/C N/C N/C N/C Bottom View Top View Top View TYPICAL APPLICATIONS Wide Input Micropower Reference Reference from Range Reference from 9V Battery.5V Battery V IN =.V TO V 9V.5V LM 5k k.k OUT.V.V.V
4 AMS85./ TYPICAL APPLICATIONS (Continued) C C Thermometer Lower Power Thermometer C C Thermometer * 5 M 5 µa M I OUT k LM 8k TO k. TO.6V 5µA M I OUT k V LM R R k.5v (..6V) V LM R R k..6v V R V R 5 R * N68 or N97 select for inverse H FE 5 Select for operation at.v I Q 6µA to 9 µa R Calibration. Short, adjust R for I OUT = temp at µa/ K. Remove short, adjust R for correct reading in C I Q at.v 5 µa I Q at.6v.ma Calibration. Short, adjust R for I OUT = temp at.8µa/ K. Remove short, adjust R for correct reading in F Centigrade Thermometer Micropower* V Reference I Q.5V V R LM V.k V V OUTPUT mv/ C.k.k 9k 5k 7k M 7 6 LM5C 8 M V IN = 5V 5pF.5M V k 5k Calibration *I Q µa standby current. Adjust so that V = temp at mv/ K.. Adjust V to 7.mV. I Q for.v to.6v battery voltage = 5µA to 5µA
5 AMS85./ TYPICAL APPLICATIONS (Continued) Micropower Thermocouple Cold Junction Compensator V LM MERCURY CELL.5V 5.k M % ZERO ADJ k R V R k % TC ADJ 5 Adjustment Procedure. Adjust TC ADJ pot until voltage across equals Kelvin temperature multiplied by the thermocouple Seebeck coefficient.. Adjust ZERO ADJ pot until voltage across R equals the thermocouple Seebeck coefficient multiplied by 7.. Thermocouple Seebeck R Voltage Voltage Type Coefficient (Ω) (Ω) Across Across R (mv/ 5 C (mv) (mv) THERMOCOUPLE COLD JUNCTION ISO THERMAL WITH LM METER J 5. 5.k 5.6. T.8 k K Ω.7.7 S Ω Typical supply current 5µA Precision µa to ma Current Sources V.5V TO 7V I OUT * k C 5pF 7 6 LM R.5V TO 7V k I OUT * 7 LM C 5pF 6 R V *I OUT =.V/R
6 AMS85./ TYPICAL PERFORMANCE CHARACTERISTICS OUTPUT VOLTAGE CHANGE (mv) Reverse Characteristics 8 T A =5 C 6 T A =5 C T A =55 C.. REVERSE CURRENT (ma) REVERSE CURRENT (µa) Reverse Characteristics T A =5 C T A =55 C T A =5 C REVERSE VOLTAGE (V) FORWARD VOLTAGE (V) Forward Characteristics. T A =55 C.8. T A =5 C T A =5 C.. FORWARD CURRENT (ma) DYNAMIC IMPEDANCE (Ω) Reverse Dynamic Impedance T A =5 C T A =5 C T A =55 C... REVERSE CURRENT (ma) REFERENCE VOLTAGE (V) Temperature Drift of Representative Units I R = µa TEMPERATURE ( C) DYNAMIC IMPEDANCE (Ω) k k Reverse Dynamic Impedance T A =5 C I R = µa. k k k FREQUENCY (Hz) M INTEGRATED NOISE ( µv) Filtered Output Noise I R = µa µa SINGLE POLE LOW PASS OUTPUT SHARP CUTOFF FILTER NOISE (nv/ Hz) Noise Voltage I R = µa VOLTAGE SWING (V)..5.5 ~ Response Time INPUT OUTPUT k INPUT OUTPUT ~ k k k CUTOFF FREQUENCY (Hz) k k k FREQUENCY (Hz) 6 TIME (µs)
7 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted. AMS85./ LEAD TO9 PLASTIC PACKAGE (N).6±.5 (.5±.7) DIA.8±.5 (.57±.7).8±.5 (.57±.7).9 (.86) NOM.6±. (.5±.5).±. (.556±.7).5 (.7) MIN.5 (.7) MAX UNCONTROLLED LEAD DIMENSIONS 5 NOM NOM.5±.5 (.7±.7).6±. (.6±.76).5±. (.8±.5) N (TO9 ) AMS DRW# 9 8 LEAD SOIC PLASTIC PACKAGE (S).89.97* (.85.) ( ).5.57** (.8.988).5.69 (.6.75).. (..5).8. (..5).. (.5.58) x 5 8 TYP..9 (.55.8).5 (.7) TYP.6.5 (.6.7) S (SO8 ) AMS DRW# 9 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED.6" (.5mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED." (.5mm) PER SIDE
8 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted (Continued). AMS85./ SOT89 PLASTIC PACKAGE (L).7.8 (..6).6.7 (.6.8).55.6 (..6)..7 (.5.) (.9.5).9. (.9.6).8.9 (..9).5.7 (.89.).59 (.5) BSC.8 (.) BSC.7. (..56)..9 (.6.8) L (SOT89 ) AMS DRW# 9
LM /LM /LM Micropower Voltage Reference Diode
LM185-1.2/LM285-1.2/LM385-1.2 Micropower Voltage Reference Diode General Description The LM185-1.2/LM285-1.2/LM385-1.2 are micropower 2-terminal band-gap voltage regulator diodes. Operating over a 10 µa
LM /LM /LM Micropower Voltage Reference Diode
LM185-2.5/LM285-2.5/LM385-2.5 Micropower Voltage Reference Diode General Description The LM185-2.5/LM285-2.5/LM385-2.5 are micropower 2-terminal band-gap voltage regulator diodes. Operating over a 20 µa
LM34 - Precision Fahrenheit Temperature Sensor
- Precision Fahrenheit Temperature Sensor Features Typical Application Calibrated directly in degrees Fahrenheit Linear +10.0 mv/ F scale factor 1.0 F accuracy guaranteed (at +77 F) Parametric Table Supply
PART. Maxim Integrated Products 1
9-704; Rev 5; /09 Improved Precision Micropower General Description The is a precision two-terminal shunt mode, bandgap voltage reference with a fixed reverse breakdown voltage of.225v. Ideal for space-critical
LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors
LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors General Description The LM135 series are precision, easily-calibrated, integrated circuit temperature sensors. Operating as a 2-terminal
LM4040 Precision Micropower Shunt Voltage Reference
LM4040 Precision Micropower Shunt Voltage Reference General Description Ideal for space critical applications, the LM4040 precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount
LM50 SOT-23 Single-Supply Centigrade Temperature Sensor
SOT-23 Single-Supply Centigrade Temperature Sensor General Description The LM50 is a precision integrated-circuit temperature sensor that can sense a 40 C to +125 C temperature range using a single positive
LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors
LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors General Description The LM135 series are precision, easily-calibrated, integrated circuit temperature sensors. Operating as a 2-terminal
High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
LM35 Precision Centigrade Temperature Sensors
LM35 Precision Centigrade Temperature Sensors General Description The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade)
TC ma, Tiny CMOS LDO With Shutdown. General Description. Features. Applications. Package Types SOT-23 SC-70
1 ma, Tiny CMOS LDO With Shutdown Features Space-saving -Pin SC-7 and SOT-23 Packages Extremely Low Operating Current for Longer Battery Life: 3 µa (typ.) Very Low Dropout Voltage Rated 1 ma Output Current
LMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
Low Drift, Low Power Instrumentation Amplifier AD621
a FEATURES EASY TO USE Pin-Strappable Gains of 0 and 00 All Errors Specified for Total System Performance Higher Performance than Discrete In Amp Designs Available in -Lead DIP and SOIC Low Power,.3 ma
1μA Ultra-Tiny Shunt Voltage Reference
EVALUATION KIT AVAILABLE MAX6069 General Description The MAX6069 ultra-low-power shunt references are ideal for space-critical and low-power applications. They are offered in a 4-bump wafer-level package
CA3086. General Purpose NPN Transistor Array. Applications. Pinout. Ordering Information. Data Sheet August 2003 FN483.5
Data Sheet August FN8. General Purpose NPN Transistor Array The consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
Precision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
LM317L, NCV317LB. 100 ma Adjustable Output, Positive Voltage Regulator LOW CURRENT THREE-TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
100 ma Adjustable Output, Positive Voltage Regulator The LM317L is an adjustable 3terminal positive voltage regulator capable of supplying in excess of 100 ma over an output voltage range of 1.2 V to 37
LM135 LM235 LM335 LM135A LM235A LM335A Precision Temperature Sensors
LM135 LM235 LM335 LM135A LM235A LM335A Precision Temperature Sensors General Description The LM135 series are precision easily-calibrated integrated circuit temperature sensors Operating as a 2-terminal
N.C. OUT. Maxim Integrated Products 1
19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
Low-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References
19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output
50ppm/ C Precision Micropower Shunt Voltage References with Multiple Reverse Breakdown Voltages
Click here for production status of specific part numbers. LM4050/LM4051 References with Multiple s General Description The LM4050/LM4051 are precision two-terminal, shuntmode, bandgap voltage references
A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS -30 V V GS Max ± 20 V PD - 9759 * HEXFET Power MOSFET R DS(on) max (@V GS = -V) 65 mω ' R DS(on) max (@V GS = -4.5V) 270 mω 6 Micro3 TM (SOT-23) Application(s) System/Load Switch Features and Benefits
AME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. n General Description. n Typical Application. n Features. n Functional Block Diagram
8855 n General Description n Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
PRODUCTION DATA SHEET
The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew
GP1M003A080H/ GP1M003A080F GP1M003A080HH/ GP1M003A080FH
Features Low gate charge 1% avalanche tested Improved dv/dt capability RoHS compliant Halogen free package JEDEC Qualification S = 88 V @T jmax = 3A R DS(ON) =. (max) @ = 1 V D G Absolute Maximum Ratings
MAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
MAU Series W, Miniature SIP, Single & DC/DC s Key Features Efficiency up to 0 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0 to UL 9V-0 Package
MCP9700/9700A MCP9701/9701A
Low-Power Linear Active Thermistor ICs Features Tiny Analog Temperature Sensor Available Packages: SC-70-5, SOT-23-5, TO-92-3 Wide Temperature Measurement Range: - -40 C to +125 C Accuracy: - ±2 C (max.),
. DIRECTLY CALIBRATED IN o K. . 1 o C INITIAL ACCURACY. . OPERATES FROM 450µA TO 5mA .LESS THAN 1Ω DYNAMIC IMPEDANCE LM135 LM235-LM335,A
. DIRECTLY CALIBRATED IN o K. INITIAL ACCURACY. OPERATES FROM 50µA TO 5mA.LESS THAN Ω DYNAMIC IMPEDANCE -,A PRECISION TEMPERATURE SENSORS Z TO9 (Plastic Package DESCRIPTION The,, are precision temperature
LM35 Precision Centigrade Temperature Sensors
Precision Centigrade Temperature Sensors General Description Typical Applications The series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius
SHM-14 Ultra-Fast, 14-Bit Linear Monolithic Sample-Hold Amplifiers
INNOVATION and EX C ELL E N C E Ultra-Fast, 1-Bit Linear Monolithic Sample-Hold Amplifiers FEATURES Fast acquisition time: 10ns to ±0.1% 0ns to ±0.0% ns to ±0.01% ±0.001% Nonlinearity 6µV rms output noise
RP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LOW DROPOUT VOLTAGE (1.15V TYP. @ I OUT =1A,25 C) VERY LOW QUIESCENT CURRENT (5 ma TYP. @ 25 C) OUTPUT CURRENT UP TO 1A FIXED OUTPUT
MAX6012/6021/6025/ 6030/6041/6045/6050. Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References. General Description.
General Description The /MAX6021/MAX6025/MAX6030/MAX6041/ MAX6045/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They feature a proprietary
MAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
FAN4040 Precision Micropower Shunt Voltage Reference
www.fairchildsemi.com Precision Micropower Shunt Voltage Reference Features Fixed 2.500V, 3.300V and 5.00V s to ±0.1% (25 C) Low output noise Low temperature coefficient to 0ppm/ C Small package Extended
AME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. General Description. Typical Application. Features. Functional Block Diagram.
8855 General Description Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
TOP VIEW. Maxim Integrated Products 1
9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout
PT5108. High-PSRR 500mA LDO GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATIONS. Ripple Rejection vs Frequency. Ripple Rejection (db)
GENERAL DESCRIPTION The PT5108 is a low-dropout voltage regulator designed for portable applications that require both low noise performance and board space. Its PSRR at 1kHz is better than 70dB. The PT5108
AOZ8212ACI-05. Two-line Bi-directional TVS Diode. General Description. Features. Applications
Two-line Bi-directional TVS Diode General Description The is a two-line bi-directional transient voltage suppressor diode designed to protect voltage sensitive electronics from high transient conditions
LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIC1MO12E8, 12 V, 8 mohm, TO-247-3L LSIC1MO12E8 12 V N-channel, Enhancement-mode SiC MOSFET RoHS Pb Product Summary Characteristics Value Unit V DS 12 V Typical R DS(ON) 8 mω I D ( T C 1 C) 25 A Circuit
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LOW DROPOUT VOLTAGE (1.15V TYP. @ I OUT = 1A, 25 C) VERY LOW QUIESCENT CURRENT (5 ma TYP. @ 25 C) OUTPUT CURRENT UP TO 1A FIXED
A I DM. W/ C V GS Gate-to-Source Voltage ± 16. Thermal Resistance Symbol Parameter Typ. Max. Units
V DSS 40 V V GS Max ± 6 V R DS(on) max (@V GS = V) 56 mω G 3 D PD - 96309A HEXFET Power MOSFET R DS(on) max (@V GS = 4.5V) Application(s) Load/ System Switch DC Motor Drive 78 mω S 2 Micro3 TM (SOT-23)
AME 1.5A CMOS LDO AME8815. n General Description. n Functional Block Diagram. n Features. n Typical Application. n Applications
n General Description n Functional Block Diagram The family of linear regulators feature low quiescent current (45µA typ.) with low dropout voltage, making them ideal for battery applications. It is available
RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
NEGATIVE ADJUSTABLE VOLTAGE REGULATOR
NEGATIVE USTABLE K AK HVK AHVK IP337K IP337AK IP337HVK IP337AHVK / LM137K / LM137AK / LM137HVK / LM137AHVK / LM337K / LM337AK / LM337HVK / LM337AHVK FEATURES 1.5A Output Current Guaranteed Internal Thermal
LM34 Precision Fahrenheit Temperature Sensors
1 Precision Fahrenheit Temperature Sensors 1 Features 3 Description 1 Calibrated Directly in Degrees Fahrenheit The series devices are precision integratedcircuit temperature sensors, whose output voltage
LT R1. Quad Matched Resistor Network. Applications. Typical Application
Quad Matched Resistor Network Features n Excellent Matching A-Grade: 0.0% Matching B-Grade: 0.0% Matching n 0.ppm/ C Matching Temperature Drift n ±V Operating Voltage (±0V Abs Max) n ppm/ C Absolute Resistor
IRLML2030TRPbF HEXFET Power MOSFET
V DS 30 V V GS Max ± 20 V R DS(on) max (@V GS = V) R DS(on) max (@V GS = 4.5V) m: 54 m: G S PD - 97432 HEXFET Power MOSFET 2 3 D Micro3 TM (SOT-23) Application(s) Load/ System Switch Features and Benefits
Technical Documents LM35. +V S (4 V to 20 V)
1 Product Folder Sample & Buy Technical Documents Tools & Software Support & Community 1 Features 1 Calibrated Directly in Celsius (Centigrade) Linear 10-mV/ Scale Factor 0.5 Ensured Accuracy (at 25) Rated
A I DM W/ C V GS. Thermal Resistance Symbol Parameter Typ. Max. Units
PD - 9757 IRLML000TRPbF HEXFET Power MOSFET V DS 00 V V GS Max ± 6 V G R DS(on) max (@V GS = 0V) 220 m: 3 D R DS(on) max (@V GS = 4.5V) 235 m: S 2 Micro3 TM (SOT-23) IRLML000TRPbF Application(s) Load/
MAX6043 Precision High-Voltage Reference in SOT23
MAX643 General Description The MAX643 precision voltage reference provides accurate preset +, +3.3V, +4.96V, +5.V, and +1V reference voltages from up to +4V input voltages. The MAX643 features a proprietary
Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References
19-777; Rev 3; /01 General Description The /MAX6021/MAX6025/MAX6030/MAX601/ MAX605/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They
SGM nA, Single Rail-to-Rail I/O Operational Amplifier
GENERAL DESCRIPTION The SGM8041 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 710nA (TYP) of quiescent current. This device is also designed to support rail-to-rail
Ultra High Ratio Si Hyperabrupt Varactor Diode Rev. V10. RoHS Compliant Part Number Configuration Package Package Cp (pf) Package Ls (nh)
Features Ultra High Capacitance Ratio, C(0.1V)/C(4.7V) =18:1 C(0.1V)/C(2.7V) = 12:1 Surface Mount Plastic Packages: SC-79, SOD- 323, SC-70, 3 Lead SPC Process for Superior C vs. V and Q vs. V Repeatability
MC1403, B. Low Voltage Reference PRECISION LOW VOLTAGE REFERENCE
Low Voltage Reference A precision bandgap voltage reference designed for critical instrumentation and D/A converter applications. This unit is designed to work with D/A converters, up to bits in accuracy,
LM4040, LM4041. Precision Micro-Power Shunt Voltage References
LM44, LM441 Precision Micro-Power Shunt Voltage References Description LM44 and LM441 are precision two terminal shunt mode voltage references offered in factory programmed reverse breakdown voltages of
AME. High PSRR, Low Noise, 300mA CMOS Regulator AME8853. n General Description. n Typical Application. n Features. n Functional Block Diagram
8853 n General Description n Typical Application The 8853 family of positive, CMOS linear regulators provide low dropout voltage(220mv@300ma), low quiescent current, and low noise CMOS LDO. These rugged
MAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Key Features
W, Miniature SIP, Single & Dual Output DC/DC s Key Features Efficiency up to % 000 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0] to +] UL
Advanced Power Electronics Corp. APE mA LOW DROPOUT LINEAR REGULATOR FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT APE8800
300mA LOW DROPOUT LINEAR REGULATOR FEATURES Low Dropout Voltage of 250mV at 300mA Guaranteed 300mA Output Current Very Low Quiescent Current at about 30uA ±2% Output Voltage Accuracy for 1.5V,1.8V, 2.5V
LM60B LM60C 2 7V SOT-23 Temperature Sensor
LM60B LM60C 2 7V SOT-23 Temperature Sensor General Description The LM60 is a precision integrated-circuit temperature sensor that can sense a b40 C toa125 C temperature range while operating from a single
AO3411 P-Channel Enhancement Mode Field Effect Transistor
January 23 AO3411 P-Channel Enhancement Mode Field Effect Transistor General Description The AO3411 uses advanced trench technology to provide excellent R DS(ON), low gate charge and operation with gate
RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 300/600mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
5-V Low Drop Fixed Voltage Regulator TLE 4275
5-V Low Drop Fixed Voltage Regulator TLE 4275 Features Output voltage 5 V ± 2% Very low current consumption Power-on and undervoltage reset Reset low down to V Q = 1 V Very low-drop voltage Short-circuit-proof
YB Pin Microprocessor Reset Monitor
Introduction The is a cost-effective system supervisor Integrated Circuit (IC) designed to monitor V CC in digital and mixed signal systems and provide a warning signal when the system power supply is
Ultra-Low-Power Series Voltage Reference
19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION. LTC V, 60mA Flash Memory Programming Supply
LTC V, 0mA Flash Memory Programming Supply FEATRES Guaranteed 0mA Output Regulated V ±% Output Voltage No Inductors Supply Voltage Range:.V to.v I CC 0.µA Typ in Shutdown Low Power: I CC = 00µA -Pin SO
Ultra-Low-Power Precision Series Voltage Reference MAX6029. Features. General Description. Ordering Information. Applications.
MAX629 General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin SOT23 surface-mount package that uses 7% less
Bay Linear. 1.0Amp Low Dropout Voltage Regulator B1117
Bay Linear Inspire the Linear Power 1.Amp Low Dropout oltage Regulator B1117 Adjustable & Fix (.4olt Dropout) Description The Bay Linear B1117 is a three terminal positive NPN regulator offered as adjustable
Product Description. TMP01: Low Power, Programmable Temperature Controller (Temperature Sensor)
TMP0: Low Power, Programmable Temperature Controller (Temperature Sensor) Product Description The TMP0 is a temperature sensor which generates a voltage output proportional to absolute temperature and
GENERAL DESCRIPTION The PT5128 is a dual channel low-dropout voltage regulator designed for portable and wireless applications that require high PSRR, low quiescent current and excellent line and load
CM1117F 1A LOW DROPOUT VOLTAGE REGULATOR
GENERAL DESCRIPTION FEATURES The series of adjustable and fixed voltage regulators are designed to provide 1A for applications requiring high efficiency. All internal circuitry is designed to operated
MM74C908 Dual CMOS 30-Volt Relay Driver
Dual CMOS 30-Volt Relay Driver General Description The MM74C908 is a general purpose dual high voltage driver capable of sourcing a minimum of 250 ma at V OUT = V CC 3V, and T J = 65 C. The MM74C908 consists
AO4802 Dual N-Channel Enhancement Mode Field Effect Transistor
July 2 AO482 Dual N-Channel Enhancement Mode Field Effect Transistor General Description The AO482 uses advanced trench technology to provide excellent R DS(ON) and low gate charge. They offer operation
PART. Maxim Integrated Products 1
9-79; Rev ; 9/ SC7 Inverting Charge Pumps General Description The / monolithic, CMOS chargepump voltage inverters in the ultra-small SC7 package feature a low Ω output resistance, permitting loads up to
Monolithic N-Channel JFET Dual
SST Monolithic N-Channel JFET Dual V GS(off) (V) V (BR)GSS Min (V) Min (ms) I G Typ (pa) V GS V GS Max (mv) to 6. Monolithic Design High Slew Rate Low Offset/Drift Voltage Low Gate Leakage: pa Low Noise
GM4275 GM4275 V2.03. Features. Description. Applications. Block Diagram WIDE INPUT RANGE 5V LOW DROPOUT REGULATOR WITH RESET FLAG
Description The GM4275 series of fixed output, micro-power voltage regulators is designed for applications which require wide input voltage range up to 45V. The GM4275 is an excellent choice for the use
800mA and 1A Low Dropout Positive Regulator 2.85V, 3V, 3.3V, 5V, and Adjustable
A 8mA and A Low Dropout Positive Regulator.85V, 3V, 3.3V, 5V, and Adjustable FEATURES.85V, 3V, 3.3V, 5V, and ADJUSTABLE VERSIONS.85V MODEL FOR SCSI- ACTIVE TERMINATION OUTPUT CURRENT: : 8mA max A: A max
Description. Part numbers. AB version C version Output voltage LD2980ABM30TR LD2980ABM33TR LD2980CM33TR 3.3 V LD2980ABM50TR LD2980CM50TR 5.
Features SOT23-5L Stable with low ESR ceramic capacitors Ultra low dropout voltage (0.12 V typ. at 50 ma load, 7 mv typ. at 1 ma load) Very low quiescent current (80 µa typ. at no load in on mode; max
SGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
IC Temperature Sensor Provides Thermocouple Cold-Junction Compensation
IC Temperature Sensor Provides Thermocouple Cold-Junction Compensation Introduction Due to their low cost and ease of use, thermocouples are still a popular means for making temperature measurements up
AO7401 P-Channel Enhancement Mode Field Effect Transistor
Nov P-Channel Enhancement Mode Field Effect Transistor General Description The uses advanced trench technology to provide excellent R DS(ON), low gate charge, and operation with gate voltages as low as.5v,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE: 1.2
IFX8117. Data Sheet. Standard Power. 1A Low-Dropout Linear Voltage Regulator IFX8117MEV IFX8117MEV33 IFX8117MEV50. Rev. 1.
1A Low-Dropout Linear Voltage Regulator IFX8117MEV IFX8117MEV33 IFX8117MEV5 Data Sheet Rev. 1.1, 21-7-2 Standard Power 1A Low-Dropout Linear Voltage Regulator IFX8117 1 Overview Features 5 V, 3.3 V and
MAX6033 High-Precision, Low-Dropout SOT23 Series Voltage Reference
MAX633 High-Precision, Low-Dropout SOT23 Series General Description The MAX633 ultra-high-precision series voltage reference features a low 7ppm/ C (max) temperature coefficient and a low dropout voltage
TLF80511EJ. Data Sheet. Automotive Power. Low Dropout Linear Fixed Voltage Regulator TLF80511EJV50 TLF80511EJV33. Rev. 1.
Low Dropout Linear Fixed Voltage Regulator TLF80511EJV50 TLF80511EJV33 Data Sheet Rev. 1.0, 2014-11-17 Automotive Power Table of Contents 1 Overview.......................................................................
Low-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
Distributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Ultra-High Isolation DIP, Single & DC/DC s Key Features Low Cost 6 Isolation MTBF > 6, Hours Short Circuit Protection Input, and 24 Output,, 1, {, { and {1 Regulated Outputs Low Isolation Capacitance
Pb-free (RoHS compliant) package Qualified according AEC Q101 C1 (2) Type Marking Pin Configuration Package BCV62A BCV62B BCV62C 2 = C1 2 = C1 2 = C1
PNP Silicon Double Transistor To be used as a current mirror Good thermal coupling and V BE matching High current gain Low collector-emitter saturation voltage 1 2 Pb-free (RoHS compliant) package Qualified
AME, Inc. 5A Low Dropout AME1084 Positive Voltage Regulator General Description Functional Block Diagram Input Current Limiting
General Description Functional Block Diagram The is a 5A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are
N-Channel 8 V (D-S) MOSFET
Si00X N-Channel 8 V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) ( ) I (A) Q g (Typ.) 0.086 at V GS =. V. a 8 0.09 at V GS =. V.9 0.0 at V GS =.8 V. 7. 0.0 at V GS =. V 0.7 FEATURES Halogen-free According
2-Terminal IC Temperature Transducer AD590
FEATURES Linear current output: μa/k Wide temperature range: 55 C to 50 C Probe-compatible ceramic sensor package -terminal device: voltage in/current out Laser trimmed to ±0.5 C calibration accuracy (M)
P-Channel Enhancement Mode Mosfet
WPM34 WPM34 P-Channel Enhancement Mode Mosfet Features Higher Efficiency Extending Battery Life Miniature SOT3-3 Surface Mount Package Super high density cell design for extremely low RDS (ON) http://www.willsemi.com
SP1064 Series 8.5pF, 15 kv Diode Array
SP1064 Series 8.5pF, 15 kv Diode Array Description Avalanche breakdown diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide a high level of protection for electronic
ST2L Very low quiescent current dual voltage regulator. Description. Features. Applications
Very low quiescent current dual voltage regulator Description Datasheet - production data Features DFN8 (5x6 mm) V O1 : fixed V O2 : adjustable from 1.25 to V I - V DROP Guaranteed current of output 1:
DAC10* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017
* PRODUCT PAGE QUICK LINKS Last Content Update: 0/3/07 COMPARABLE PARTS View a parametric search of comparable parts. DOCUMENTATION Data Sheet : 0-Bit Current-Out DAC Data Sheet REFERENCE MATERIALS Solutions
RT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. Features. General Description. Applications
Pin Configurations RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices
DG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.
Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,
General Purpose Transistors
General Purpose Transistors NPN and PNP Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT 33/SC which is designed for low power surface mount
RT9184A. Dual, Ultra-Fast Transient Response, 500mA LDO Regulator. General Description. Features. Pin Configuration. Applications
RT9184A Dual, Ultra-Fast Transient Response, 500mA LDO Regulator General Description The RT9184A series are an efficient, precise dual-channel CMOS LDO regulator optimized for ultra-low-quiescent applications.
FEATURES APPLICATIO S TYPICAL APPLICATIO. LT1996 Precision, 100µA Gain Selectable Amplifier DESCRIPTIO
FEATURES Pin Configurable as a Difference Amplifier, Inverting and Noninverting Amplifier Difference Amplifier Gain Range to CMRR >db Noninverting Amplifier Gain Range. to Inverting Amplifier Gain Range.