SHM-14 Ultra-Fast, 14-Bit Linear Monolithic Sample-Hold Amplifiers
|
|
- Emil Bates
- 6 years ago
- Views:
Transcription
1 INNOVATION and EX C ELL E N C E Ultra-Fast, 1-Bit Linear Monolithic Sample-Hold Amplifiers FEATURES Fast acquisition time: 10ns to ±0.1% 0ns to ±0.0% ns to ±0.01% ±0.001% Nonlinearity 6µV rms output noise 0MHz small signal bandwidth 70MHz full power bandwidth 80dB feedthrough 1ps Aperture jitter 0mW power dissipation Low cost GENERAL DESCRIPTION The is an extremely high-speed and accurate monolithic sample-and-hold amplifier designed for fast data acquisition applications. The is accurate (±0. LSB to 1-bits over the full military temperature range) and is very fast (10ns and 0ns acquisition times to accuracies of 10 and 1 bits respectively). With this high performance and a full power bandwidth of 70MHz, the is an ideal device for driving flash and high-resolution subranging A/D converters. A careful design optimizes the device for accuracy and speed over the full military temperature range. The droop rate is a low ±mv/µs and can be further reduced by adding an optional external hold capacitor. The 0mA output current and guaranteed specifications for a 100Ω load provide high drive capability. Operating from ± V supplies, the consumes only 0mW of power. The is built using a fast complementary bipolar process. The device is available in both military and industrial temperature ranges. The is packaged in a -pin plastic SOIC or in a 0-pin ceramic LCC. / CONNECTIONS SOIC PIN FUNCTION PIN FUNCTION 1 DO NOT CONNECT DO NOT CONNECT 6 DO NOT CONNECT 7 DO NOT CONNECT 8 1 NOT CONNECTED NOT CONNECTED NOT CONNECTED 6 DO NOT CONNECT 7 8 DO NOT CONNECT 9 DO NOT CONNECT 10 / 1 / 1 EXT. CAPACITOR / CONNECTIONS CLCC PIN FUNCTION PIN FUNCTION 0 NOT CONNECTED 19 / 18 / 17 NOT CONNECTED 1 EXT. CAPACITOR EXTERNAL CAPACITOR 1,, 8 10, 11, 1 +1 CH 1pF +1 9 / 1 SWITCH DRIVE /,, 6, 7 DO NOT CONNECT 1 Note: SOIC Package Pinouts Shown Figure 1. Functional Block Diagram DATEL, Inc., 11 Cabot Boulevard, Mansfield, MA (U.S.A.) Tel: (08) Fax: (08) 9-66 For immediate assistance (800) -76
2 ABSOLUTE MAXIMUM RATINGS PARAMETERS LIMITS UNITS +V Supply 0 to +6 Volts V Supply 0 to 6 Volts Analog Input +V Supply 1 Volts V Supply +1 Volts Continuous Output Current ±0 ma Digital Inputs <Supply Voltages Volts Junction Temperature +17 C Lead Temperature (10 seconds) +00 C Output shorted to any supply will cause permanent damage. FUNCTIONAL SPECIFICATIONS (Apply over the operating temperature range using a 100Ω resistive load, 10pF capacitive load, ECL digital input levels, and ±V nominal supplies, unless specified.) S MIN. TYP. MAX. UNITS Input Voltage Range. +. Volts Input Impedance 0. 1 MΩ Digitals Inputs (Balanced ECL) Logic Levels Logic Volts Logic Volts Logic Loading Logic µa Logic µa S Output Voltage Range. +. Volts Output Current 1 ± 0 ma Output Impedance (dc) 0. 1 Ω Stable Capacitive Load 0 pf PERFORMANCE Nonlinearity (±1V) + C ±0.001 % 0 to +8 C ±0.00 % to +1 C ±0.00 % Sample Mode Offset + C ±1 mv 0 to +8 C ±0 mv to +1 C ±0 mv Pedestal + C ± mv 0 to +8 C ±0 mv to +1 C ±0 mv Gain, + C V/V Gain Drift (±1V) 0 to +8 C ±0 ppm/ C to +1 C ±0 ppm/ C Aperture Delay 0 to +8 C ns to +1 C ns Aperture Jitter 0 to +8 C 1 ps rms to +1 C 1 ps rms Harmonic Distortion (±1V) dc to 1MHz 7 db dc to 10MHz + C 8 db 0 to +8 C 0 db to +1 C 8 db Acquisition Time (±0.01%, ±V) 0 to +8 C ns to +1 C ns Acquisition Time (±0.0%, ±V) 0 to +8 C 0 ns to +1 C 0 ns Acquisition Time (±0.0%, ±V) 0 to +8 C 19 0 ns to +1 C 0 ns PERFORMANCE (Cont.) MIN. TYP. MAX. UNITS Acquisition Time (±0.1%, ±V) 0 to +8 C 10 ns to +1 C ns Hold Mode Settling (±0.01%) 0 to +8 C 1 ns to +1 C 1 ns Hold Mode Settling (±0.0%) 0 to +8 C 7 18 ns to +1 C 7 18 ns Hold Mode Settling (±0.0%) 0 to +8 C 6 ns to +1 C 6 ns Hold Mode Settling (±0.1%) 0 to +8 C 1 ns to +1 C 1 ns Slew Rate ±00 ±0 V/µs Full Power Bandwidth (±1V) 70 MHz Small Signal Bandwidth MHz Output Noise, Hold Mode 6 µvrms Feedthrough (V Step) 80 db Droop Rate + C ± ±6 mv/µs 0 to +8 C ± ±1 mv/µs to +1 C ±10 ±0 mv/µs POWER SUPPLY REQUIREMENTS Power Supply Range +V Supply Volts V Supply.. Volts Power Supply Current +V Supply ma V Supply 17 0 ma Power Dissipation mw Power Supply Rejection Ratio 0 60 db ENVIRONMENTAL Operating Temp. Range, Case S, L 0 +8 C LM +1 C Storage Temperature Range C Package Type S -Pin plastic SOIC L, LM 0-Pin ceramic LCC Footnotes: 1 Short circuit protection at ±0mA. TECHNICAL NOTES The employs an open loop architecture in order to achieve its superior high-speed characteristics. The first stage buffer amplifier, which charges the hold capacitor, incorporates the sample-and-hold switch into its design. This technique allows for a fast acquisition time which is not limited by slew current like the traditional Schottky diode bridge switch. The output amplifier uses a closed loop voltage feedback design which provides a low (0.Ω, typical) output impedance. Gain and linearity are not affected by heavy loads. The design has been optimized to achieve the high accuracy associated with fast transient responses over the full military temperature range. During the track-to-hold transient, the integral nonlinearity is not affected and the pedestal remains constant over the full ±.V input range. An external hold capacitor can be added to the 1pF internal hold capacitor to obtain a lower droop rate (the droop rate is proportional to the inverse of the total hold capacitor value) without increasing transient response times by more than few ns. Settling and acquisition times are typically increased by ns and 10ns respectively for 7pF and 100pF external hold capacitors. The external hold capacitor should not exceed 100pF.
3 ING AND LAYOUT Obtaining fully specified performance from the requires careful attention to pc-board layout and power supply decoupling. For optimal performance, tie all grounds directly to a large analog ground plane beneath and around the package. Bypass all power supplies to ground with 10µF tantalum capacitors in parallel with ceramic capacitors. Locate the bypass capacitors as close to the unit as possible. For best performance, controlled impedance transmission line techniques, such as microstrip, should be used. Mount all components as close to the required pins as possible. It is strongly recommended that the not be socket-mounted. 0Ω 0 Ω 1 () / / (19) 1 (18) 1 (17) () 0Ω (7) V SUPPLY EXTERNAL CAPACITOR (1) 1 (1) 11 () C Refer to Table 1 for optional capacitor values. + 10µF 8 (10) V SUPPLY 10 (1) 9 (11) 10µF V NOTES: 1. Pin numbers in ( ) are for CLCC package.. For SOIC package: Pins,, 6, 7 DO NOT CONNECT. For CLCC package: Pins 1,,,, 0 NOT CONNECTED Pins 6, 8, 9 DO NOT CONNECT R Load 100Ω +V + Figure. Simplified Connection Diagram -0.8 V -1.8 V -0.8 V -1.8 V +1 V -1 V Acquisition Time to ±0.0% 0ns typ. +1 V -1 V 7ns typ. Track-to-hold Settling to ±0.0% Feedthrough -80dB 7ns typ. 0ns typ. Figure. Control and Timing
4 Evaluation Board for CLCC-0 Version 0Ω, 17, 18, Ω 7 / / EXTERNAL CAPACITOR , 0 1 1, 1 C 8Ω 0Ω 8Ω Refer to Table 1. for optional capacitor values. 1 6, 7, 8, 9, 10 11, 1, 1 1,,, PLANE Figure. Evaluation Board Schematic Table 1. Optional External Capacitor Operating Type of Capacitor Model Temperature Range (Ceramic, 100pF, ±10%) L, -1S 0 to +8 C Type I or II, NPO or X7R LM to +1 C Type I or NPO
5 R C1 C7 PLASTIC STANDOFF R1 C6 R6 R C C R C C EXT C INCHES (mm) 0. (11) (.) (0.) 0. (.) (TOP VIEW) 0.8 (1.9) (7.9) (BOTTOM VIEW) 0.9 (.) Figure. Evaluation Board Dimensions Evaluation Board Connections PIN FUNCTION
6 MECHANICAL DIMENSIONS INCHES (MM) A 1 8 E D 9 K INCHES MILLIMETERS C F B L J G H SOIC- Package SYMBOL MIN. MAX. MIN. MAX. A B C D E BSC 1.7 BSC F G H J K L A CLCC-0 Package G B D C E PIN 1 INDEX INCHES MILLIMETERS SYMBOL MIN. MAX. MIN. MAX. A B C 0.07 REF 1.91 REF D E F 0.00 REF 0.1 G 0.00 BSC 1.7 BSC H 0.00 REF 1.0 (H x H PLACES) F (F x ) BOTTOM VIEW ORDERING INFORMATION MODEL NUMBER PACKAGE TEMPERATURE RANGE S SOIC- 0 to +8 C L CLCC-0 0 to +8 C LM CLCC-0 to +1 C EVB-SHM1 Evaluation Board (with LM) Contact DATEL for availability of high reliability models. INNOV A TION and EX CELLENCE ISO 9001 ISO 9001 R E G I S T E R E D DS /96 DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA Tel: (08) (800) -76 Fax: (08) 9-66 Internet: sales@datel.com Data Sheet Fax Back: (08) DATEL (UK) LTD. Tadley, England Tel: (016)-880 DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: DATEL GmbH München, Germany Tel: DATEL KK Tokyo, Japan Tel: , Osaka Tel: 6--0 DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.
PRODUCT OVERVIEW REF. IN 16 BIPOLAR OFFSET 17 REGISTER 74LS75 REGISTER 74LS75 BITS LSB
FEATURES -Bit resolution Integral nonlinearity error ±/LSB, max. Differential nonlinearity error ±/LSB, max. MIL-STD- high-reliability versions available Input register μs fast output settling time Guaranteed
More informationADC Bit, 50MHz Video A/D Converter
ADC- -Bit, 0MHz Video A/D Converter FEATURES Low power dissipation (0mW max.) Input signal bandwith (00MHz) Optional synchronized clamp function Low input capacitance (pf typ.) +V or +V /+.V power supply
More informationHigh-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
More informationLow Drift, Low Power Instrumentation Amplifier AD621
a FEATURES EASY TO USE Pin-Strappable Gains of 0 and 00 All Errors Specified for Total System Performance Higher Performance than Discrete In Amp Designs Available in -Lead DIP and SOIC Low Power,.3 ma
More informationN.C. OUT. Maxim Integrated Products 1
19-2892; Rev 2; 11/6 Ultra-Low-Power Precision Series General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationPART. Maxim Integrated Products 1
9-79; Rev ; 9/ SC7 Inverting Charge Pumps General Description The / monolithic, CMOS chargepump voltage inverters in the ultra-small SC7 package feature a low Ω output resistance, permitting loads up to
More informationKH600. 1GHz, Differential Input/Output Amplifier. Features. Description. Applications. Typical Application
KH 1GHz, Differential Input/Output Amplifier www.cadeka.com Features DC - 1GHz bandwidth Fixed 1dB (V/V) gain 1Ω (differential) inputs and outputs -7/-dBc nd/3rd HD at MHz ma output current 9V pp into
More informationUltra-Low-Power Series Voltage Reference
19-257; Rev 2; 3/5 Ultra-Low-Power Series Voltage Reference General Description The micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin
More informationCompact, Dual-Output Charge Pump
9-7; Rev ; 7/97 Compact, Dual-Output Charge Pump General Description The is a CMOS charge-pump DC-DC converter in an ultra-small µmax package. It produces positive and negative outputs from a single positive
More information2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
More informationRP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
More informationUltra-Low-Power Precision Series Voltage Reference MAX6029. Features. General Description. Ordering Information. Applications.
MAX629 General Description The MAX629 micropower, low-dropout bandgap voltage reference combines ultra-low supply current and low drift in a miniature 5-pin SOT23 surface-mount package that uses 7% less
More informationPrecision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
More informationTOP VIEW. Maxim Integrated Products 1
9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout
More informationPRODUCTION DATA SHEET
The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew
More informationHIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The / optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. The devices are housed in a compact small-outline
More informationDAC10* PRODUCT PAGE QUICK LINKS Last Content Update: 02/23/2017
* PRODUCT PAGE QUICK LINKS Last Content Update: 0/3/07 COMPARABLE PARTS View a parametric search of comparable parts. DOCUMENTATION Data Sheet : 0-Bit Current-Out DAC Data Sheet REFERENCE MATERIALS Solutions
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE: 1.2
More informationCA3086. General Purpose NPN Transistor Array. Applications. Pinout. Ordering Information. Data Sheet August 2003 FN483.5
Data Sheet August FN8. General Purpose NPN Transistor Array The consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
More informationDG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.
Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DG211B, DG212B DESCRIPTION The DG211B, DG212B analog switches are highly improved versions of the industry-standard DG211, DG212. These devices are fabricated in proprietary
More informationIH5341, IH5352. Dual SPST, Quad SPST CMOS RF/Video Switches. Description. Features. Ordering Information. Applications. Pinouts.
SEMICONDUCTOR IH, IH2 December Features Description Dual SPST, Quad SPST CMOS RF/Video Switches R DS(ON) < Ω Switch Attenuation Varies Less Than db From DC to 00MHz "OFF" Isolation > 0dB Typical at 0MHz
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Key Features
W, Miniature SIP, Single & Dual Output DC/DC s Key Features Efficiency up to % 000 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0] to +] UL
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More informationDescription. Part numbers. AB version C version Output voltage LD2980ABM30TR LD2980ABM33TR LD2980CM33TR 3.3 V LD2980ABM50TR LD2980CM50TR 5.
Features SOT23-5L Stable with low ESR ceramic capacitors Ultra low dropout voltage (0.12 V typ. at 50 ma load, 7 mv typ. at 1 ma load) Very low quiescent current (80 µa typ. at no load in on mode; max
More informationLC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409
a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS
More informationLow Voltage 2-1 Mux, Level Translator ADG3232
Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection
More informationMAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
More informationLC 2 MOS Precision Analog Switch in MSOP ADG419-EP
LC 2 MOS Precision Analog Switch in MSOP AG49-EP FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
MAU Series W, Miniature SIP, Single & DC/DC s Key Features Efficiency up to 0 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0 to UL 9V-0 Package
More informationPT5108. High-PSRR 500mA LDO GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATIONS. Ripple Rejection vs Frequency. Ripple Rejection (db)
GENERAL DESCRIPTION The PT5108 is a low-dropout voltage regulator designed for portable applications that require both low noise performance and board space. Its PSRR at 1kHz is better than 70dB. The PT5108
More informationMM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
More informationDATASHEET AD7520, AD7521. Features. Ordering Information. Pinouts. 10-Bit, 12-Bit, Multiplying D/A Converters. FN3104 Rev.4.
DATASHEET AD720, AD72 0Bit, 2Bit, Multiplying D/A Converters The AD720 and AD72 are monolithic, high accuracy, low cost 0bit and 2bit resolution, multiplying digitaltoanalog converters (DAC). Intersil
More informationMM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. DS0026 Dual High-Speed MOS Driver General Description DS0026 is a low cost
More informationDS0026 Dual High-Speed MOS Driver
Dual High-Speed MOS Driver General Description DS0026 is a low cost monolithic high speed two phase MOS clock driver and interface circuit. Unique circuit design provides both very high speed operation
More information7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED. October 2002
THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD LINE REGULATION: MAX 0.2% OVER FULL TEMPERATURE RANGE LOAD REGULATION:
More informationFeatures. Y Wide supply voltage range 3 0V to 15V. Y Guaranteed noise margin 1 0V. Y High noise immunity 0 45 VCC (typ )
MM70C95 MM80C95 MM70C97 MM80C97 TRI-STATE Hex Buffers MM70C96 MM80C96 MM70C98 MM80C98 TRI-STATE Hex Inverters General Description These gates are monolithic complementary MOS (CMOS) integrated circuits
More informationMAX6012/6021/6025/ 6030/6041/6045/6050. Precision, Low-Power, Low-Dropout, SOT23-3 Voltage References. General Description.
General Description The /MAX6021/MAX6025/MAX6030/MAX6041/ MAX6045/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They feature a proprietary
More informationSY10/100EL11V. General Description. Precision Edge. Features. Pin Names. 5V/3.3V 1:2 Differential Fanout Buffer. Revision 10.0
SY10/100EL11 5/3.3 1:2 Differential Fanout Buffer Revision 10.0 General Description The SY10/100EL11 are 1:2 differential fanout gates. These devices are functionally similar to the E111A/L devices, with
More informationSwitched-Capacitor Voltage Doublers
9-; Rev 3; / Switched-Capacitor Voltage Doublers General Description The ultra-small / monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +.V to +.V. Their high voltage-conversion
More informationM74HCT138TTR 3 TO 8 LINE DECODER (INVERTING)
3 TO 8 LINE DECODER (INVERTING) HIGH SPEED: t PD = 16ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) SYMMETRICAL
More informationObsolete Product(s) - Obsolete Product(s)
8-INPUT NAND GATE HIGH SPEED: t PD = 13ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: I
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 300/600mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
More informationObsolete Product(s) - Obsolete Product(s)
3 TO 8 LINE DECODER HIGH SPEED: t PD = 15ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More informationKD A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED
7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD
More informationM74HC20TTR DUAL 4-INPUT NAND GATE
DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 9ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More informationLow-Cost, Micropower, Low-Dropout, High-Output-Current, SOT23 Voltage References
19-1613; Rev 3; 3/2 Low-Cost, Micropower, Low-Dropout, General Description The are low-cost, low-dropout (LDO), micropower voltage references. These three-terminal references are available with output
More informationMAX14753 V DD INA0 INA1 INA2 INA3 OUT INB0 INB1 INB2 INB3
19-4255; Rev 3; 7/10 8-Channel/Dual 4-Channel General Description The are 8-to-1 and dual 4-to-1 high-voltage analog multiplexers. Both devices feature 60Ω (typ) on-resistance with 0.03Ω (typ) on-resistance
More informationCD54/74AC153, CD54/74ACT153
CD4/74AC13, CD4/74ACT13 Data sheet acquired from Harris Semiconductor SCHS237A September 1998 - Revised May 2000 Dual 4-Input Multiplexer Features Description [ /Title (CD74 AC13, CD74 ACT1 3) /Subject
More informationLM4040 Precision Micropower Shunt Voltage Reference
LM4040 Precision Micropower Shunt Voltage Reference General Description Ideal for space critical applications, the LM4040 precision voltage reference is available in the sub-miniature SC70 and SOT-23 surface-mount
More informationMAX6043 Precision High-Voltage Reference in SOT23
MAX643 General Description The MAX643 precision voltage reference provides accurate preset +, +3.3V, +4.96V, +5.V, and +1V reference voltages from up to +4V input voltages. The MAX643 features a proprietary
More informationMM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
More informationMC1403, B. Low Voltage Reference PRECISION LOW VOLTAGE REFERENCE
Low Voltage Reference A precision bandgap voltage reference designed for critical instrumentation and D/A converter applications. This unit is designed to work with D/A converters, up to bits in accuracy,
More informationMM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
More informationM74HCT688TTR 8 BIT EQUALITY COMPARATOR
8 BIT EQUALITY COMPARATOR HIGH SPEED: t PD = 21ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) SYMMETRICAL
More informationTC ma, Tiny CMOS LDO With Shutdown. General Description. Features. Applications. Package Types SOT-23 SC-70
1 ma, Tiny CMOS LDO With Shutdown Features Space-saving -Pin SC-7 and SOT-23 Packages Extremely Low Operating Current for Longer Battery Life: 3 µa (typ.) Very Low Dropout Voltage Rated 1 ma Output Current
More information2 Input NAND Gate L74VHC1G00
Input NAND Gate The is an advanced high speed CMOS input NAND gate fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining
More informationMM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
More informationSC70, 1.6V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
19-1862; Rev 4; 1/7 SC7, 1.6V, Nanopower, Beyond-the-Rails General Description The nanopower comparators in space-saving SC7 packages feature Beyond-the- Rails inputs and are guaranteed to operate down
More informationFeatures Y Wide analog input voltage range g6v. Y Low on resistance 50 typ (VCC V EE e4 5V) Y Logic level translation to enable 5V logic with g5v
74VHC4051 8-Channel Analog Multiplexer 74VHC4052 Dual 4-Channel Analog Multiplexer 74VHC4053 Triple 2-Channel Analog Multiplexer General Description These multiplexers are digitally controlled analog switches
More informationObsolete Product(s) - Obsolete Product(s)
DUAL 4 CHANNEL MULTIPLEXER 3 STATE OUTPUT HIGH SPEED: t PD = 16ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
More informationRT9184A. Dual, Ultra-Fast Transient Response, 500mA LDO Regulator. General Description. Features. Pin Configuration. Applications
RT9184A Dual, Ultra-Fast Transient Response, 500mA LDO Regulator General Description The RT9184A series are an efficient, precise dual-channel CMOS LDO regulator optimized for ultra-low-quiescent applications.
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More informationM74HC147TTR 10 TO 4 LINE PRIORITY ENCODER
10 TO 4 LINE PRIORITY ENCODER HIGH SPEED: t PD = 15ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More informationPrecision, Low-Power, Low-Dropout, SOT23-3 Voltage References
19-777; Rev 3; /01 General Description The /MAX6021/MAX6025/MAX6030/MAX601/ MAX605/ precision, low-dropout, micropower voltage references are available in miniature SOT23-3 surface-mount packages. They
More informationObsolete Product(s) - Obsolete Product(s)
BCD TO DECIMAL DECODER HIGH SPEED : t PD = 14ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More informationLow-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
More informationSGM nA, Non-Unity Gain, Dual Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8046 operates with a single supply voltage as low as 1.4V, while drawing less than 670nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationST3L01 TRIPLE VOLTAGE REGULATOR
TRIPLE VOLTAGE REGULATOR DUAL INPUT VOLTAGE (12V AND 5V) TRIPLE OUTPUT VOLTAGE (2.6V, 3.3V, 8V) 2.6V GUARANTEED I OUT UP TO 1.2A 3.3V GUARANTEED I OUT UP TO 1.0A 8V GUARANTEED I OUT UP TO 200mA THERMAL
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. Features. General Description. Applications
Pin Configurations RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices
More informationSGM nA, Non-Unity Gain, Quad Rail-to-Rail Input/Output Operational Amplifier
PRODUCT DESCRIPTION The SGM8048 operates with a single supply voltage as low as 1.4V, while drawing less than 690nA (TYP) of quiescent current per amplifier. This device is also designed to support rail-to-rail
More informationGeneral Purpose Transistors
General Purpose Transistors NPN and PNP Silicon These transistors are designed for general purpose amplifier applications. They are housed in the SOT 33/SC which is designed for low power surface mount
More informationDATASHEET HS Features. Pinouts. ARINC 429 Bus Interface Line Driver Circuit. FN2963 Rev 3.00 Page 1 of 7. May 30, FN2963 Rev 3.
DATASHEET ARI 429 Bus Interface Line Driver Circuit FN2963 Rev 3.00 The is a monolithic dielectric ally isolated bipolar differential line driver designed to meet the specifications of ARI 429. This device
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationComplementary (N- and P-Channel) MOSFET
Complementary (N- and P-Channel) MOSFET Si45BDY PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) N-Channel 3.7 at V GS = V 2.2 at V GS = 4.5 V 7.9 P-Channel -.27 at V GS = - 4.5 V -.37 at V GS
More informationDESCRIPTION TYPICAL APPLICATION. LTC Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package FEATURES APPLICATIONS
LTC117- Micropower, Regulated V Charge Pump in a -Pin SOT-23 Package FEATRES ltralow Power: I CC = 6µA Typ Short-Circuit/Thermal Protected V ±% Regulated Output Range: 2.7V to V Output Current: 10mA (
More informationS-882Z Series ULTRA-LOW VOLTAGE OPERATION CHARGE PUMP IC FOR STEP-UP DC-DC CONVERTER STARTUP. Rev.1.2_00. Features. Applications.
ULTRA-LOW VOLTAGE OPERATION CHARGE PUMP IC FOR STEP-UP DC-DC CONVERTER STARTUP The is a charge pump IC for step-up DC-DC converter startup, which differs from conventional charge pump ICs, in that it uses
More informationMM74C85 4-Bit Magnitude Comparator
4-Bit Magnitude Comparator General Description The MM74C85 is a four-bit magnitude comparator which will perform comparison of straight binary or BCD codes. The circuit consists of eight comparing inputs
More informationDS34C87T CMOS Quad TRI-STATE Differential Line Driver
DS34C87T CMOS Quad TRI-STATE Differential Line Driver General Description The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines The DS34C87T meets all
More informationGENERAL DESCRIPTION The PT5128 is a dual channel low-dropout voltage regulator designed for portable and wireless applications that require high PSRR, low quiescent current and excellent line and load
More informationCD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset
October 1987 Revised January 1999 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset General Description The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits
More informationL7800AB/AC SERIES PRECISION 1A REGULATORS
L7800AB/AC SERIES PRECISION 1A REGULATORS OUTPUT CURRENT IN EXCESS OF 1A OUTPUT VOLTAGES OF 5; 6; 8; 9; 12; 15; 18; 20; 24V THERMAL OVERLOAD PROTECTION OUTPUT TRANSITION SOA PROTECTION 2% OUTPUT VOLTAGE
More information54AC258 54ACT258 Quad 2-Input Multiplexer with TRI-STATE Outputs
54AC258 54ACT258 Quad 2-Input Multiplexer with TRI-STATE Outputs General Description The AC/ ACT258 is a quad 2-input multiplexer with TRI-STATE outputs. Four bits of data from two sources can be selected
More informationSN74LS153D 74LS153 LOW POWER SCHOTTKY
74LS153 The LSTTL/MSI SN74LS153 is a very high speed Dual 4-Input Multiplexer with common select inputs and individual enable inputs for each section. It can select two bits of data from four sources.
More informationCD4028BC BCD-to-Decimal Decoder
BCD-to-Decimal Decoder General Description The is a BCD-to-decimal or binary-to-octal decoder consisting of 4 inputs, decoding logic gates, and 10 output buffers. A BCD code applied to the 4 inputs, A,
More informationPSMN006-20K. N-channel TrenchMOS SiliconMAX ultra low level FET
Rev. 7 November 29 Product data sheet. Product profile. General description SiliconMAX ultra low level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology.
More informationMM74C906 Hex Open Drain N-Channel Buffers
Hex Open Drain N-Channel Buffers General Description The MM74C906 buffer employs monolithic CMOS technology in achieving open drain outputs. The MM74C906 consists of six inverters driving six N-channel
More informationDATA SHEET. BGY115A; BGY115B; BGY115C/P; BGY115D UHF amplifier modules DISCRETE SEMICONDUCTORS May 13
DISCRETE SEMICONDUCTORS DATA SHEET Supersedes data of May 994 File under Discrete Semiconductors, SC9 996 May 3 FEATURES 6 V nominal supply voltage996 May 3. W output power (BGY5A, BGY5B and BGY5D).4 W
More informationUNISONIC TECHNOLOGIES CO., LTD UR133/A
UNISONIC TECHNOLOGIES CO., LTD 300/500mA LOW DROPOUT LINEAR VOLTAGE REGULATORS 3 1 2 1 DESCRIPTION SOT-23 (EIAJ SC-59) SOT-223 The UTC are 300/500mA fixed output voltage low dropout linear regulators.
More informationHCF4532B 8-BIT PRIORITY ENCODER
8-BIT PRIORITY ENCODER CONVERTS FROM 1 TO 8 TO INPUTS BINARY PROVIDES CASCADING FEATURE TO HANDLE ANY NUMBER OF INPUTS GROUP SELECT INDICATES ONE OR MORE PRIORITY INPUTS QUIESCENT CURRENT SPECIFIED UP
More informationAME. High PSRR, Low Noise, 600mA CMOS Regulator AME8855. n General Description. n Typical Application. n Features. n Functional Block Diagram
8855 n General Description n Typical Application The 8855 family of positive, CMOS linear regulators provide low dropout voltage(42mv@6ma), low quiescent current, and low noise CMOS LDO. These rugged devices
More informationHIGH CURRENT BRIDGE DRIVER and 4-20mA Transmitter
XTR1 HIGH CURRENT RIDGE DRIVER and 4-2mA Transmitter FEATURES SENSOR EXCITATION OF 1W VARIALE EXCITATION VOLTAGE: 1.V to.v SINGLE SUPPLY: 11.4V to 3VDC INRUSH CURRENT LIMITING 4-2mA TRANSMITTER APPLICATIONS
More informationRT9166B. 600mA, Ultra-Fast Transient Response Linear Regulator. General Description. Features. Ordering Information. Applications. Pin Configurations
Ordering Information Output Voltage 12 : 1.2V Note : Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering
More information5-V Low Drop Fixed Voltage Regulator TLE 4275
5-V Low Drop Fixed Voltage Regulator TLE 4275 Features Output voltage 5 V ± 2% Very low current consumption Power-on and undervoltage reset Reset low down to V Q = 1 V Very low-drop voltage Short-circuit-proof
More informationMM54HC173 MM74HC173 TRI-STATE Quad D Flip-Flop
MM54HC173 MM74HC173 TRI-STATE Quad D Flip-Flop General Description The MM54HC173 MM74HC173 is a high speed TRI-STATE QUAD D TYPE FLIP-FLOP that utilizes advanced silicongate CMOS technology It possesses
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Ultra-High Isolation DIP, Single & DC/DC s Key Features Low Cost 6 Isolation MTBF > 6, Hours Short Circuit Protection Input, and 24 Output,, 1, {, { and {1 Regulated Outputs Low Isolation Capacitance
More informationMM74C90 MM74C93 4-Bit Decade Counter 4-Bit Binary Counter
4-Bit Decade Counter 4-Bit Binary Counter General Description The MM74C90 decade counter and the MM74C93 binary counter and complementary MOS (CMOS) integrated circuits constructed with N- and P-channel
More information