Hybrid indium phosphide-on-silicon nanolaser diode
|
|
- Oscar Nelson
- 5 years ago
- Views:
Transcription
1 In the format provided by the authors and unedited. DOI: /NPHOTON Hybrid indium phosphide-on-silicon nanolaser diode Guillaume Crosnier 1,2, Dorian Sanchez 2, Sophie Bouchoule 2, Paul Monnier 2, Gregoire Beaudoin 2, Isabelle Sagnes 2, Rama Raj 2, Fabrice Raineri 2,3* 1 STMicroelectronics SA, 850 Rue Jean Monnet, Crolles, France 2 Centre de Nanosciences et de Nanotechnologies, CNRS, Univ. Paris-Sud, Université Paris-Saclay, C2N- Marcoussis, Marcoussis, France 3 Université Paris Diderot, Sorbonne Paris Cité, Paris Cedex 13, France * To whom correspondence should be addressed. fabrice.raineri@c2n.upsaclay.fr Composition of the InP-based NIP heterostructure Materials Thickness (nm) Doping (cm -3 ) InP 105 N (Si) 2-3x10 18 (x6) In 0.84 Ga 0.16 As 0.48 P nid In 0.84 Ga 0.16 As 0.76 P nid In 0.84 Ga 0.16 As 0.48 P nid In 0.84 Ga 0.16 As 0.48 P nid In 0.84 Ga 0.16 As 0.48 P P (Zn) -2-3x10 18 InP 20 nid Supplementary Table 1: Composition of the InP-based heterostructure bonded to SOI. nid: not intentionally doped. NATURE PHOTONICS 1
2 Design of the InP-based 1D photonic crystal cavity: The holes of the photonic crystal are etched through the InP-based rib waveguide such as the lattice constant is varied as indicated in Supplementary Fig. 1. Supplementary Figure 1: Lattice constant a i variation strategy in the x-direction. i=0 represents the central cell of the nanocavity. Here, the lattice constant is varied from 300 nm in the centre to 330 nm at both extremities of the nanocavity. NATURE PHOTONICS 2
3 Evanescent wave coupling of the InP-based 1D photonic crystal cavity to the SOI waveguides: Supplementary Figure 2a) shows the calculated Q-factor (Q L ) of the InP nanorib cavity (including the absorptive doped layers) integrated on top of a w Si wide, 220nm thick SOI wire waveguide. The cavity is separated from the waveguide by a 40nm BCB layer and a SiO 2 layer of thickness, t ox, varying from 300nm to 600nm. For all the t ox considered, Q L finds a minimum for w Si =550nm, indicating a maximum evanescent coupling strength for this particular width. For example, for t ox =300nm, Q L can be tuned at will from 550 to 4.13x10 4 by varying w Si. To give an insight on the coupling efficiency (η) as a function of w Si and t ox, we plot on Supplementary Figure 2b) the fraction of the optical power not coupled to the waveguide, 1- η given by 1 = Where Q i is the intrinsic quality factor, here equals to 4.4x10 4. We show that η can be tuned by varying w Si and be as large as 99% for w Si =550nm and t ox =300nm. Such a large η comes at the price of a low Q L which may prevent the structure from lasing if the active material gain is not large enough. Our experimental operation set-point is displayed in both figures (Q L= 1.7x10 3 and =1. = 83%) a 10 0 b Loaded Q-factor nm 500nm 400nm 300nm Experiment SOI waveguide width (nm) 1- η nm 500nm 400nm 300nm Experiment SOI waveguide width (nm) Supplementary Figure 2: (a) Calculated loaded Q-factors and (b) resulting fraction of optical power not coupled to SOI (1-η) for our hybrid nanorib cavity as a function of w Si and t ox. The experimental data (red star) is that of a passive nanocavity which presents a loaded and intrinsic Q-factors of 1.7x10 3 and 1x10 4 respectively. NATURE PHOTONICS 3
4 Impact of the P contact size and position on the radiative carrier recombination profile: Supplementary Figure 3a) displays the maximum value of the radiative recombination rate (R rad ) (red line) and the associated full width at half maximum (FWHM) of its spatial profile (blue line) as a function of the P contact length (L) along the semiconductor strip drilled with the PhC. Here the P contact is 1µm away from the edge of the strip. While the FWHM increases rapidly from 5µm to 14µm with L varying from 1µm to 15µm, the R rad maximum is clamped at 4.1x10 27 cm -3.s -1 for L > 3µm. We plot on Supplementary Figure 3b) the same 2 quantities as a function, this time, of the distance (d) of the p-contact to the edge of the semiconductor strip. Here, L is fixed at 3µm. The R rad maximum diminishes as the P contact is distanced from the strip due to the increase of the electrical resistance. The FWHM increases softly from 3µm to 6µm for 0µm<d<1.5µm. Maximum of R rad (cm -3.s -1 ) 5x x x x x a L (µm) Rrad spatial profile FWHM (µm) Maximum of R rad (cm -3.s -1 ) 1.0x x x x x d (µm) Supplementary Figure 3: Optoelectronic properties of the hybrid nanolaser as a function of the P contact position and length. a) Maximum of radiative recombination rate (red line) and FWHM of its spatial profile (blue line) as a function of the P contact length (L) along the semiconductor strip. Here d=1µm. b) Maximum of radiative recombination rate (red line) and FWHM of its spatial profile (blue line) as a function of the P contact distance, d, to the edge of the semiconductor strip. Here, L=3µm. For all simulations, the bias voltage is fixed at 1V. b Rrad spatial profile profile FWHM (µm) NATURE PHOTONICS 4
5 Rate equation model for the InP-based nanorib laser The expected current laser threshold is calculated by solving in the steady state the following standard rate equation for the carrier density (N) and the photon number S: =. =. With the electrical injection efficient, I the current, q the electron charge, the active volume, the carrier non radiative lifetime, F p the Purcell factor, B the bimolecular recombination coefficient, g the gain coefficient, N tr the carrier density at transparency, the photon lifetime and the spontaneous emission factor. The parameters defining our system can be estimated from literature or measurements, as summed up in the following table: (cm -3 ) 0.15x10-12 (ns) 7 F p 2.3 B (cm 3 /s) g (cm -3 /s) 1.38x10 25 N tr (cm -3 ) (ps) can directly be determined from our P(I) laser characterisation. From the obtained curve, we derive a slope efficiency P/ I= (0.28±0.07)W/A giving a differential quantum efficiency, = = (35±0.9)%. with, the optical coupling efficiency evaluated here to be 80%. This gives = (44 ± 1)%. The threshold current derives as with the carrier density at the threshold h = h h + 1 h = 1 NATURE PHOTONICS 5
6 I th is calculated to be 64µA which is in the order of magnitude of the measured value. This relatively high value finds its origin in the rather low loaded Q factor of 1700 and to a lesser extent in the active volume which is larger than in references 22 and 25. To diminish the current threshold, it is necessary to increase the loaded Q factor of the cavity. This is possible by improving the processing technology and reducing the coupling strength of the cavity to the waveguide. Indeed, there is room for improvement as the calculated intrinsic Q factor is 4.4x10 4 while the measured one is of about By maintaining the same optical coupling efficiency, the new loaded Q would be This would ensure the preservation of the same high differential quantum efficiency while the threshold current could be reduced to 14µA by lowering the number of QWs in the active region to 2. NATURE PHOTONICS 6
7 Process flow of the hybrid nanolaser diodes: Supplementary Figure 4: Process flow of the hybrid nanolaser diode. 7 NATURE PHOTONICS 7
1) Institut d Electronique Fondamentale, CNRS, Univ. Paris- Sud, Université Paris- Saclay, Bâtiment 220, Rue André Ampère, F Orsay, France
Supporting information Direct band gap germanium microdisks obtained with silicon nitride stressor layers Moustafa El Kurdi, 1 Mathias Prost, 1 Abdelhamid Ghrib, 1 Sébastien Sauvage, 1 Xavier Checoury,
More informationLight emission from strained germanium
Light emission from strained germanium Supplementary information P. Boucaud, 1, a) M. El Kurdi, 1 S. Sauvage, 1 M. de Kersauson, 1 A. Ghrib, 1 and X. Checoury 1 Institut d Electronique Fondamentale, CNRS
More informationPaper Review. Special Topics in Optical Engineering II (15/1) Minkyu Kim. IEEE Journal of Quantum Electronics, Feb 1985
Paper Review IEEE Journal of Quantum Electronics, Feb 1985 Contents Semiconductor laser review High speed semiconductor laser Parasitic elements limitations Intermodulation products Intensity noise Large
More informationSchool of Electrical and Computer Engineering, Cornell University. ECE 5330: Semiconductor Optoelectronics. Fall 2014
School of Electrical and Computer Engineering, Cornell University ECE 5330: Semiconductor Optoelectronics Fall 014 Homework 7 Due on Nov. 06, 014 Suggested Readings: i) Study lecture notes. ii) Study Coldren
More informationHigh Power Diode Lasers
Lecture 10/1 High Power Diode Lasers Low Power Lasers (below tenth of mw) - Laser as a telecom transmitter; - Laser as a spectroscopic sensor; - Laser as a medical diagnostic tool; - Laser as a write-read
More informationPHOTOVOLTAICS Fundamentals
PHOTOVOLTAICS Fundamentals PV FUNDAMENTALS Semiconductor basics pn junction Solar cell operation Design of silicon solar cell SEMICONDUCTOR BASICS Allowed energy bands Valence and conduction band Fermi
More informationEE 472 Solutions to some chapter 4 problems
EE 472 Solutions to some chapter 4 problems 4.4. Erbium doped fiber amplifier An EDFA is pumped at 1480 nm. N1 and N2 are the concentrations of Er 3+ at the levels E 1 and E 2 respectively as shown in
More informationEE 6313 Homework Assignments
EE 6313 Homework Assignments 1. Homework I: Chapter 1: 1.2, 1.5, 1.7, 1.10, 1.12 [Lattice constant only] (Due Sept. 1, 2009). 2. Homework II: Chapter 1, 2: 1.17, 2.1 (a, c) (k = π/a at zone edge), 2.3
More informationElectrons are shared in covalent bonds between atoms of Si. A bound electron has the lowest energy state.
Photovoltaics Basic Steps the generation of light-generated carriers; the collection of the light-generated carriers to generate a current; the generation of a large voltage across the solar cell; and
More informationOscillateur paramétrique optique en
C. Ozanam 1, X. Lafosse 2, I. Favero 1, S. Ducci 1, G. Leo 1 1 Université Paris Diderot, Sorbonne Paris Cité, Laboratoire MPQ, CNRS-UMR 7162, Paris, France, 2 Laboratoire de Photonique et Nanostructures,
More informationRoom-temperature continuous-wave lasing from monolayer molybdenum ditelluride integrated with a silicon nanobeam cavity
In the format provided by the authors and unedited. DOI: 10.1038/NNANO.2017.128 Room-temperature continuous-wave lasing from monolayer molybdenum ditelluride integrated with a silicon nanobeam cavity Yongzhuo
More informationChapter 5. Semiconductor Laser
Chapter 5 Semiconductor Laser 5.0 Introduction Laser is an acronym for light amplification by stimulated emission of radiation. Albert Einstein in 1917 showed that the process of stimulated emission must
More informationChapter 1 Overview of Semiconductor Materials and Physics
Chapter 1 Overview of Semiconductor Materials and Physics Professor Paul K. Chu Conductivity / Resistivity of Insulators, Semiconductors, and Conductors Semiconductor Elements Period II III IV V VI 2 B
More informationStimulated Emission Devices: LASERS
Stimulated Emission Devices: LASERS 1. Stimulated Emission and Photon Amplification E 2 E 2 E 2 hυ hυ hυ In hυ Out hυ E 1 E 1 E 1 (a) Absorption (b) Spontaneous emission (c) Stimulated emission The Principle
More informationLaser Basics. What happens when light (or photon) interact with a matter? Assume photon energy is compatible with energy transition levels.
What happens when light (or photon) interact with a matter? Assume photon energy is compatible with energy transition levels. Electron energy levels in an hydrogen atom n=5 n=4 - + n=3 n=2 13.6 = [ev]
More informationPhotoluminescence characterization of quantum dot laser epitaxy
Photoluminescence characterization of quantum dot laser epitaxy Y. Li *, Y. C. Xin, H. Su and L. F. Lester Center for High Technology Materials, University of New Mexico 1313 Goddard SE, Albuquerque, NM
More informationSegmented 1.55um Laser with 400% Differential Quantum Efficiency J. Getty, E. Skogen, L. Coldren, University of California, Santa Barbara, CA.
Segmented 1.55um Laser with 400% Differential Quantum Efficiency J. Getty, E. Skogen, L. Coldren, University of California, Santa Barbara, CA. Abstract: By electrically segmenting, and series-connecting
More informationSemiconductor device structures are traditionally divided into homojunction devices
0. Introduction: Semiconductor device structures are traditionally divided into homojunction devices (devices consisting of only one type of semiconductor material) and heterojunction devices (consisting
More informationChemistry Instrumental Analysis Lecture 8. Chem 4631
Chemistry 4631 Instrumental Analysis Lecture 8 UV to IR Components of Optical Basic components of spectroscopic instruments: stable source of radiant energy transparent container to hold sample device
More informationSUPPLEMENTARY INFORMATION
doi:10.1038/nature12036 We provide in the following additional experimental data and details on our demonstration of an electrically pumped exciton-polariton laser by supplementing optical and electrical
More informationISSN Review. Progress to a Gallium-Arsenide Deep-Center Laser
Materials 2009, 2, 1599-1635; doi:10.3390/ma2041599 OPEN ACCESS materials ISSN 1996-1944 www.mdpi.com/journal/materials Review Progress to a Gallium-Arsenide Deep-Center Laser Janet L. Pan Yale University,
More informationExternal (differential) quantum efficiency Number of additional photons emitted / number of additional electrons injected
Semiconductor Lasers Comparison with LEDs The light emitted by a laser is generally more directional, more intense and has a narrower frequency distribution than light from an LED. The external efficiency
More informationOPTI510R: Photonics. Khanh Kieu College of Optical Sciences, University of Arizona Meinel building R.626
OPTI510R: Photonics Khanh Kieu College of Optical Sciences, University of Arizona kkieu@optics.arizona.edu Meinel building R.626 Announcements Homework #6 is assigned, due May 1 st Final exam May 8, 10:30-12:30pm
More informationESE 372 / Spring 2013 / Lecture 5 Metal Oxide Semiconductor Field Effect Transistor
Metal Oxide Semiconductor Field Effect Transistor V G V G 1 Metal Oxide Semiconductor Field Effect Transistor We will need to understand how this current flows through Si What is electric current? 2 Back
More informationPressure and Temperature Dependence of Threshold Current in Semiconductor Lasers Based on InGaAs/GaAs Quantum-Well Systems
Vol. 112 (2007) ACTA PHYSICA POLONICA A No. 2 Proceedings of the XXXVI International School of Semiconducting Compounds, Jaszowiec 2007 Pressure and Temperature Dependence of Threshold Current in Semiconductor
More informationELECTRONIC I Lecture 1 Introduction to semiconductor. By Asst. Prof Dr. Jassim K. Hmood
ELECTRONIC I Lecture 1 Introduction to semiconductor By Asst. Prof Dr. Jassim K. Hmood SOLID-STATE ELECTRONIC MATERIALS Electronic materials generally can be divided into three categories: insulators,
More informationStudy on Quantum Dot Lasers and their advantages
Study on Quantum Dot Lasers and their advantages Tae Woo Kim Electrical and Computer Engineering University of Illinois, Urbana Champaign Abstract Basic ideas for understanding a Quantum Dot Laser were
More informationMar Yunsu Sung. Yunsu Sung. Special Topics in Optical Engineering II(15/1)
Mar 12 2015 Contents Two-port model Rate equation and damping Small signal response Conclusion Two Port Model I:Current V:Voltage P: Optical Power ν: Optical frequency shift Model summarize parasitic effects
More informationMetal Vapour Lasers Use vapoured metal as a gain medium Developed by W. Silfvast (1966) Two types: Ionized Metal vapour (He-Cd) Neutral Metal vapour
Metal Vapour Lasers Use vapoured metal as a gain medium Developed by W. Silfvast (1966) Two types: Ionized Metal vapour (He-Cd) Neutral Metal vapour (Cu) All operate by vaporizing metal in container Helium
More informationSignal regeneration - optical amplifiers
Signal regeneration - optical amplifiers In any atom or solid, the state of the electrons can change by: 1) Stimulated absorption - in the presence of a light wave, a photon is absorbed, the electron is
More information(b) Spontaneous emission. Absorption, spontaneous (random photon) emission and stimulated emission.
Lecture 10 Stimulated Emission Devices Lasers Stimulated emission and light amplification Einstein coefficients Optical fiber amplifiers Gas laser and He-Ne Laser The output spectrum of a gas laser Laser
More informationPhotonic Crystal Nanocavities for Efficient Light Confinement and Emission
Journal of the Korean Physical Society, Vol. 42, No., February 2003, pp. 768 773 Photonic Crystal Nanocavities for Efficient Light Confinement and Emission Axel Scherer, T. Yoshie, M. Lončar, J. Vučković
More informationIntroduction to Semiconductor Integrated Optics
Introduction to Semiconductor Integrated Optics Hans P. Zappe Artech House Boston London Contents acknowledgments reface itroduction Chapter 1 Basic Electromagnetics 1 1.1 General Relationships 1 1.1.1
More informationEmission Spectra of the typical DH laser
Emission Spectra of the typical DH laser Emission spectra of a perfect laser above the threshold, the laser may approach near-perfect monochromatic emission with a spectra width in the order of 1 to 10
More informationSupplementary Information for Mid-Infrared Optical Frequency Combs at 2.5 µm based on Crystalline Microresonators
1 Supplementary Information for Mid-Infrared Optical Frequency Combs at 2.5 µm based on Crystalline Microresonators C. Y. Wang 1,2,3,, T. Herr 1,2,, P. Del Haye 1,3,7, A. Schliesser 1,2, J. Hofer 1,6,
More informationELECTRONIC DEVICES AND CIRCUITS SUMMARY
ELECTRONIC DEVICES AND CIRCUITS SUMMARY Classification of Materials: Insulator: An insulator is a material that offers a very low level (or negligible) of conductivity when voltage is applied. Eg: Paper,
More informationFIBER OPTICS. Prof. R.K. Shevgaonkar. Department of Electrical Engineering. Indian Institute of Technology, Bombay. Lecture: 14.
FIBER OPTICS Prof. R.K. Shevgaonkar Department of Electrical Engineering Indian Institute of Technology, Bombay Lecture: 14 Optical Sources Fiber Optics, Prof. R.K. Shevgaonkar, Dept. of Electrical Engineering,
More informationS. Blair February 15,
S Blair February 15, 2012 66 32 Laser Diodes A semiconductor laser diode is basically an LED structure with mirrors for optical feedback This feedback causes photons to retrace their path back through
More informationRoom Temperature Polariton Lasing in All-Inorganic. Perovskite Nanoplatelets
Supplementary Information for Room Temperature Polariton Lasing in All-Inorganic Perovskite Nanoplatelets Rui Su, Carole Diederichs,, Jun Wang, ǁ Timothy C.H. Liew, Jiaxin Zhao, Sheng Liu, Weigao Xu, Zhanghai
More informationPhotodetector. Prof. Woo-Young Choi. Silicon Photonics (2012/2) Photodetection: Absorption => Current Generation. Currents
Photodetection: Absorption => Current Generation h Currents Materials for photodetection: E g < h Various methods for generating currents with photo-generated carriers: photoconductors, photodiodes, avalanche
More informationSupplementary Materials
Supplementary Materials Sample characterization The presence of Si-QDs is established by Transmission Electron Microscopy (TEM), by which the average QD diameter of d QD 2.2 ± 0.5 nm has been determined
More informationPhotonics and Optical Communication
Photonics and Optical Communication (Course Number 300352) Spring 2007 Optical Source Dr. Dietmar Knipp Assistant Professor of Electrical Engineering http://www.faculty.iu-bremen.de/dknipp/ 1 Photonics
More informationOPTI510R: Photonics. Khanh Kieu College of Optical Sciences, University of Arizona Meinel building R.626
OPTI510R: Photonics Khanh Kieu College of Optical Sciences, University of Arizona kkieu@optics.arizona.edu Meinel building R.626 Announcements HW#3 is assigned due Feb. 20 st Mid-term exam Feb 27, 2PM
More informationMetal Vapour Lasers Use vapourized metal as a gain medium Developed by W. Silfvast (1966) Put metal in a cavity with a heater Vapourize metal, then
Metal Vapour Lasers Use vapourized metal as a gain medium Developed by W. Silfvast (1966) Put metal in a cavity with a heater Vapourize metal, then pump metal vapour with current Walter at TRG (1966) then
More informationIntroduction to Optoelectronic Device Simulation by Joachim Piprek
NUSOD 5 Tutorial MA Introduction to Optoelectronic Device Simulation by Joachim Piprek Outline:. Introduction: VCSEL Example. Electron Energy Bands 3. Drift-Diffusion Model 4. Thermal Model 5. Gain/Absorption
More informationNoise in voltage-biased scaled semiconductor laser diodes
Noise in voltage-biased scaled semiconductor laser diodes S. M. K. Thiyagarajan and A. F. J. Levi Department of Electrical Engineering University of Southern California Los Angeles, California 90089-1111
More informationρ ρ LED access resistances d A W d s n s p p p W the output window size p-layer d p series access resistance d n n-layer series access resistance
LED access resistances W the output window size p-layer series access resistance d p n-layer series access resistance d n The n-layer series access resistance R = ρ s n where the resistivity of the n-layer
More informationLecture 2. Semiconductor Physics. Sunday 4/10/2015 Semiconductor Physics 1-1
Lecture 2 Semiconductor Physics Sunday 4/10/2015 Semiconductor Physics 1-1 Outline Intrinsic bond model: electrons and holes Charge carrier generation and recombination Intrinsic semiconductor Doping:
More information3.1 Absorption and Transparency
3.1 Absorption and Transparency 3.1.1 Optical Devices (definitions) 3.1.2 Photon and Semiconductor Interactions 3.1.3 Photon Intensity 3.1.4 Absorption 3.1 Absorption and Transparency Objective 1: Recall
More informationOPTI510R: Photonics. Khanh Kieu College of Optical Sciences, University of Arizona Meinel building R.626
OPTI510R: Photonics Khanh Kieu College of Optical Sciences, University of Arizona kkieu@optics.arizona.edu Meinel building R.626 Announcements HW #6 is assigned, due April 23 rd Final exam May 2 Semiconductor
More information- Outline. Chapter 4 Optical Source. 4.1 Semiconductor physics
Chapter 4 Optical Source - Outline 4.1 Semiconductor physics - Energy band - Intrinsic and Extrinsic Material - pn Junctions - Direct and Indirect Band Gaps 4. Light Emitting Diodes (LED) - LED structure
More informationResearch Article Wavelength Width Dependence of Cavity Temperature Distribution in Semiconductor Diode Laser
ISRN Thermodynamics Volume 213, Article ID 42475, 6 pages http://dx.doi.org/1.1155/213/42475 Research Article Wavelength Width Dependence of Cavity Temperature Distribution in Semiconductor Diode Laser
More informationSemiconductor. Byungwoo Park. Department of Materials Science and Engineering Seoul National University.
Semiconductor Byungwoo Park Department of Materials Science and Engineering Seoul National University http://bp.snu.ac.kr http://bp.snu.ac.kr Semiconductors Kittel, Solid State Physics (Chapters 7 and
More informationSchool of Electrical and Computer Engineering, Cornell University. ECE 5330: Semiconductor Optoelectronics. Fall Due on Nov 20, 2014 by 5:00 PM
School of Electrical and Computer Engineering, Cornell University ECE 533: Semiconductor Optoelectronics Fall 14 Homewor 8 Due on Nov, 14 by 5: PM This is a long -wee homewor (start early). It will count
More informationNanoscience galore: hybrid and nanoscale photonics
Nanoscience galore: hybrid and nanoscale photonics Pavlos Lagoudakis SOLAB, 11 June 2013 Hybrid nanophotonics Nanostructures: light harvesting and light emitting devices 2 Hybrid nanophotonics Nanostructures:
More information1 Semiconductor Quantum Dots for Ultrafast Optoelectronics
j1 1 Semiconductor Quantum Dots for Ultrafast Optoelectronics 1.1 The Role of Dimensionality in Semiconductor Materials The history of semiconductor lasers has been punctuated by dramatic revolutions.
More informationCarrier Loss Analysis for Ultraviolet Light-Emitting Diodes
Carrier Loss Analysis for Ultraviolet Light-Emitting Diodes Joachim Piprek, Thomas Katona, Stacia Keller, Steve DenBaars, and Shuji Nakamura Solid State Lighting and Display Center University of California
More informationEffect of non-uniform distribution of electric field on diffusedquantum well lasers
Title Effect of non-uniform distribution of electric field on diffusedquantum well lasers Author(s) Man, WM; Yu, SF Citation IEEE Hong Kong Electron Devices Meeting Proceedings, Hong Kong, China, 29 August
More informationGaN-based Devices: Physics and Simulation
GaN-based Devices: Physics and Simulation Joachim Piprek NUSOD Institute Collaborators Prof. Shuji Nakamura, UCSB Prof. Steve DenBaars, UCSB Dr. Stacia Keller, UCSB Dr. Tom Katona, now at S-ET Inc. Dr.
More informationSupplementary Information for
Supplementary Information for Multi-quantum well nanowire heterostructures for wavelength-controlled lasers Fang Qian 1, Yat Li 1 *, Silvija Gradečak 1, Hong-Gyu Park 1, Yajie Dong 1, Yong Ding 2, Zhong
More informationInternal Efficiency of Semiconductor Lasers With a Quantum-Confined Active Region
404 IEEE JOURNAL OF QUANTUM ELECTRONICS, VOL. 39, NO. 3, MARCH 2003 Internal Efficiency of Semiconductor Lasers With a Quantum-Confined Active Region Levon V. Asryan, Serge Luryi, Fellow, IEEE, and Robert
More informationSpring Semester 2012 Final Exam
Spring Semester 2012 Final Exam Note: Show your work, underline results, and always show units. Official exam time: 2.0 hours; an extension of at least 1.0 hour will be granted to anyone. Materials parameters
More informationQuiz #1 Practice Problem Set
Name: Student Number: ELEC 3908 Physical Electronics Quiz #1 Practice Problem Set? Minutes January 22, 2016 - No aids except a non-programmable calculator - All questions must be answered - All questions
More informationThe German University in Cairo. Faculty of Information Engineering & Technology Semiconductors (Elct 503) Electronics Department Fall 2014
The German University in Cairo th Electronics 5 Semester Faculty of Information Engineering & Technology Semiconductors (Elct 503) Electronics Department Fall 2014 Problem Set 3 1- a) Find the resistivity
More informationDevelopment and characterization of 3D semiconductor X-rays detectors for medical imaging
Development and characterization of 3D semiconductor X-rays detectors for medical imaging Marie-Laure Avenel, Eric Gros d Aillon CEA-LETI, DETectors Laboratory marie-laure.avenel@cea.fr Outlines Problematic
More informationSimulation of GaN-based Light-Emitting Devices
Simulation of GaN-based Light-Emitting Devices Joachim Piprek Solid-State Lighting and Display Center Materials Department, College of Engineering University of California, Santa Barbara, CA 93106 piprek@ieee.org
More informationWhat do we study and do?
What do we study and do? Light comes from electrons transitioning from higher energy to lower energy levels. Wave-particle nature of light Wave nature: refraction, diffraction, interference (labs) Particle
More informationEngineering 2000 Chapter 8 Semiconductors. ENG2000: R.I. Hornsey Semi: 1
Engineering 2000 Chapter 8 Semiconductors ENG2000: R.I. Hornsey Semi: 1 Overview We need to know the electrical properties of Si To do this, we must also draw on some of the physical properties and we
More informationIn a metal, how does the probability distribution of an electron look like at absolute zero?
1 Lecture 6 Laser 2 In a metal, how does the probability distribution of an electron look like at absolute zero? 3 (Atom) Energy Levels For atoms, I draw a lower horizontal to indicate its lowest energy
More informationCME 300 Properties of Materials. ANSWERS: Homework 9 November 26, As atoms approach each other in the solid state the quantized energy states:
CME 300 Properties of Materials ANSWERS: Homework 9 November 26, 2011 As atoms approach each other in the solid state the quantized energy states: are split. This splitting is associated with the wave
More informationsmal band gap Saturday, April 9, 2011
small band gap upper (conduction) band empty small gap valence band filled 2s 2p 2s 2p hybrid (s+p)band 2p no gap 2s (depend on the crystallographic orientation) extrinsic semiconductor semi-metal electron
More informationInGaAs-AlAsSb quantum cascade lasers
InGaAs-AlAsSb quantum cascade lasers D.G.Revin, L.R.Wilson, E.A.Zibik, R.P.Green, J.W.Cockburn Department of Physics and Astronomy, University of Sheffield, UK M.J.Steer, R.J.Airey EPSRC National Centre
More informationcollisions of electrons. In semiconductor, in certain temperature ranges the conductivity increases rapidly by increasing temperature
1.9. Temperature Dependence of Semiconductor Conductivity Such dependence is one most important in semiconductor. In metals, Conductivity decreases by increasing temperature due to greater frequency of
More informationSemiconductor Physics. Lecture 3
Semiconductor Physics Lecture 3 Intrinsic carrier density Intrinsic carrier density Law of mass action Valid also if we add an impurity which either donates extra electrons or holes the number of carriers
More information6. Light emitting devices
6. Light emitting devices 6. The light emitting diode 6.. Introduction A light emitting diode consist of a p-n diode which is designed so that radiative recombination dominates. Homojunction p-n diodes,
More informationOther Devices from p-n junctions
Memory (5/7 -- Glenn Alers) Other Devices from p-n junctions Electron to Photon conversion devices LEDs and SSL (5/5) Lasers (5/5) Solid State Lighting (5/5) Photon to electron conversion devices Photodectors
More informationSheng S. Li. Semiconductor Physical Electronics. Second Edition. With 230 Figures. 4) Springer
Sheng S. Li Semiconductor Physical Electronics Second Edition With 230 Figures 4) Springer Contents Preface 1. Classification of Solids and Crystal Structure 1 1.1 Introduction 1 1.2 The Bravais Lattice
More information5 Quantum Wells. 1. Use a Multimeter to test the resistance of your laser; Record the resistance for both polarities.
Measurement Lab 0: Resistance The Diode laser is basically a diode junction. Same as all the other semiconductor diode junctions, e should be able to see difference in resistance for different polarities.
More informationEE 5611 Introduction to Microelectronic Technologies Fall Tuesday, September 23, 2014 Lecture 07
EE 5611 Introduction to Microelectronic Technologies Fall 2014 Tuesday, September 23, 2014 Lecture 07 1 Introduction to Solar Cells Topics to be covered: Solar cells and sun light Review on semiconductor
More informationElectroluminescence from Silicon and Germanium Nanostructures
Electroluminescence from silicon Silicon Getnet M. and Ghoshal S.K 35 ORIGINAL ARTICLE Electroluminescence from Silicon and Germanium Nanostructures Getnet Melese* and Ghoshal S. K.** Abstract Silicon
More informationElectron Energy, E E = 0. Free electron. 3s Band 2p Band Overlapping energy bands. 3p 3s 2p 2s. 2s Band. Electrons. 1s ATOM SOLID.
Electron Energy, E Free electron Vacuum level 3p 3s 2p 2s 2s Band 3s Band 2p Band Overlapping energy bands Electrons E = 0 1s ATOM 1s SOLID In a metal the various energy bands overlap to give a single
More informationCrystal Properties. MS415 Lec. 2. High performance, high current. ZnO. GaN
Crystal Properties Crystal Lattices: Periodic arrangement of atoms Repeated unit cells (solid-state) Stuffing atoms into unit cells Determine mechanical & electrical properties High performance, high current
More informationET3034TUx Utilization of band gap energy
ET3034TUx - 3.3.1 - Utilization of band gap energy In the last two weeks we have discussed the working principle of a solar cell and the external parameters that define the performance of a solar cell.
More informationTHE DEVELOPMENT OF SIMULATION MODEL OF CARRIER INJECTION IN QUANTUM DOT LASER SYSTEM
THE DEVELOPMENT OF SIMULATION MODEL OF CARRIER INJECTION IN QUANTUM DOT LASER SYSTEM Norbaizura Nordin 1 and Shahidan Radiman 2 1 Centre for Diploma Studies Universiti Tun Hussein Onn Malaysia 1,2 School
More informationOptoelectronics ELEC-E3210
Optoelectronics ELEC-E3210 Lecture 3 Spring 2017 Semiconductor lasers I Outline 1 Introduction 2 The Fabry-Pérot laser 3 Transparency and threshold current 4 Heterostructure laser 5 Power output and linewidth
More informationChapter 4. Photodetectors
Chapter 4 Photodetectors Types of photodetectors: Photoconductos Photovoltaic Photodiodes Avalanche photodiodes (APDs) Resonant-cavity photodiodes MSM detectors In telecom we mainly use PINs and APDs.
More informationSingle Photon detectors
Single Photon detectors Outline Motivation for single photon detection Semiconductor; general knowledge and important background Photon detectors: internal and external photoeffect Properties of semiconductor
More informationFinal Examination EE 130 December 16, 1997 Time allotted: 180 minutes
Final Examination EE 130 December 16, 1997 Time allotted: 180 minutes Problem 1: Semiconductor Fundamentals [30 points] A uniformly doped silicon sample of length 100µm and cross-sectional area 100µm 2
More informationSemiconductor Physical Electronics
Semiconductor Physical Electronics Sheng S. Li Department of Electrical Engineering University of Florida Gainesville, Florida Plenum Press New York and London Contents CHAPTER 1. Classification of Solids
More informationIntroduction to Sources: Radiative Processes and Population Inversion in Atoms, Molecules, and Semiconductors Atoms and Molecules
OPTI 500 DEF, Spring 2012, Lecture 2 Introduction to Sources: Radiative Processes and Population Inversion in Atoms, Molecules, and Semiconductors Atoms and Molecules Energy Levels Every atom or molecule
More informationPhotonic Devices. Light absorption and emission. Transitions between discrete states
Light absorption and emission Photonic Devices Transitions between discrete states Transition rate determined by the two states: Fermi s golden rule Absorption and emission of a semiconductor Vertical
More informationAssignment 6. Solution: Assumptions - Momentum is conserved, light holes are ignored. Diagram: a) Using Eq a Verdeyen,
Assignment 6 Solution: Assumptions - Momentum is conserved, light holes are ignored. Diagram: a) Using Eq..4.5a Verdeyen, ΔE c = E 2 E c = Using Eq..4.5b Verdeyen, ΔE v = E v E = b) Using Eq.2.9 Verdeyen,
More informationPhotosynthesis & Solar Power Harvesting
Lecture 23 Semiconductor Detectors - Photodetectors Principle of the pn junction photodiode Absorption coefficient and photodiode materials Properties of semiconductor detectors The pin photodiodes Avalanche
More informationSupporting Information. A differential Hall effect measurement method with. sub-nanometre resolution for active dopant
Supporting Information for A differential Hall effect measurement method with sub-nanometre resolution for active dopant concentration profiling in ultrathin doped Si 1 x Ge x and Si layers Richard Daubriac*
More informationKATIHAL FİZİĞİ MNT-510
KATIHAL FİZİĞİ MNT-510 YARIİLETKENLER Kaynaklar: Katıhal Fiziği, Prof. Dr. Mustafa Dikici, Seçkin Yayıncılık Katıhal Fiziği, Şakir Aydoğan, Nobel Yayıncılık, Physics for Computer Science Students: With
More informationMODELING OF ABOVE-THRESHOLD SINGLE-MODE OPERATION OF EDGE- EMITTING DIODE LASERS
MODELING OF ABOVE-THRESHOLD SINGLE-MODE OPERATION OF EDGE- EMITTING DIODE LASERS A. P. Napartovich, N. N. Elkin, A. G. Sukharev, V. N. Troshchieva, and D. V. Vysotsky Troitsk Institute for Innovation and
More informationElectronics The basics of semiconductor physics
Electronics The basics of semiconductor physics Prof. Márta Rencz, Gergely Nagy BME DED September 16, 2013 The basic properties of semiconductors Semiconductors conductance is between that of conductors
More informationLect. 10: Photodetectors
Photodetection: Absorption => Current Generation h Currents Materials for photodetection: E g < h Various methods for generating currents with photo-generated carriers: photoconductors, photodiodes, avalanche
More informationSemiconductor Laser Based on Thermoelectrophotonics
University of Central Florida Electronic Theses and Dissertations Doctoral Dissertation (Open Access) Semiconductor Laser Based on Thermoelectrophotonics 2014 Xiaohang Liu University of Central Florida
More information