Blizzard. Outdoor. Projector Enclosures 5-15K. Fourth eneration. Projector Enclosures

Transcription

1 G4 5-15K G4 Fourth eneration

2 is the world s most popular outdoor projector enclosure for permanent installation in any climate, for video mapping, outdoor attractions, advertising and outdoor movies. comes in three standard sizes, for projectors between 5,000 and 15,000 ANSI lumens. Now comes with all the new features you ve asked us for: Tray slides out either side for easy installation and service access Tabletop or ceiling projector mount Rear door opens for lamp access Stackable Optional Ethernet communications All models feature Tempest s patented Digital Enclosure Control system (DEC4 TM ), now available with optional remote monitoring over your TCP/IP network with Christie 14K-M projector. Use for most projectors 12-15,000 ANSI lumens. models come in three sizes, and three configurations. to suit any outdoor projection application: Landscape Enclosure for most projectors 8-10,000 ANSI lumens. Landscape The standard configuration - may be configured tabletop or ceiling style, with left or right slide access. Portrait portrait versions are available to special order in all sizes. Specify projector type when ordering P Portrait Enclosure for most projectors 10-15,000 ANSI lumens. Ultra-Short-Throw is ready for the UST revolution! Now you don t need to own the plot across the street to project on the front of your building! UST models may be configured to project either up or down, for ground or rooflevel installation. Specify projector and lens type when ordering UST Enclosure for most projectors 8-10,000 ANSI lumens fitted with Ultra- Short-Throw lenses. UST enclosures may be installed to project either up or down.

3 Ultra-strong lightweight aluminum frame Rigging points at each corner, top and bottom (M x 40mm stainless steel bolts supplied) Landscape Tempered low-iron optical grade port glass for strength and perfect imaging Adjust projector position using projector feet, then clamp firmly in place s hydrophobic HEPA inlet filter keeps out dust, oil and salt fog. Replacement access from below or inside Heavy duty stainless steel slides tray may be mounted for tabletop or ceiling operation, and to slide out left or right side DEC4 Enclosure Control with patented Goldilocks TM OS and remote monitoring option Removable side panels with security key locks Lockable back door for easy relamping access without moving the projector Variable Speed AC exhaust fan Exhaust fan door opens when fan runs DEC4 TM User Interface, for customized setup and system monitoring. May be monitored remotely with optional comms card

4 Portrait Portrait enclosures are customized for the intended projector mount, so we need to know the projector you re using when you order. Not all projectors may be used in portrait mode check with your projector manufacturer before ordering. Some projectors may be used in portrait mode but only in one orientation either base left or base right (picture here shows Christie M-Series projector installed base left. Portrait enclosures incorporate a customized mounting plate for the desired projector. Tilt mechanism allows +/- 10 projector tilt adjustment attaches to the mounting plate with screws provided. Use projector feet to adjust pan and roll, then tighten mounting screws to lock. Ultra Short Throw UST outdoor enclosures allow you to paint a wall with light without having to own the block across the street! UST enclosures are wider than standard landscape enclosures, to allow for the extreme width of the projection beam without clipping. UST enclosures may be configured to mount above the image (projecting down) or below it (projecting up). The projector mount allows considerable adjustment of pan, tilt and roll.

5 All s come with four M12 threaded sockets one at each corner top and bottom. Four stainless steel bolts are provided for attachment to any suitable support structure. Tempest recommends only the use of stainless steel hardware for installing enclosures outdoors. Three additional rigging options are available for any enclosure: Rigging Options Truss Kit Hang safely on any truss or horizontal pipe with OD 2in [50]. The Truss kit allows you to: Tilt the enclosure by pivoting on the supplied truss clamps, +/- 20 Pan the enclosure up to 45 left or right Roll the enclosure +/- 5 Stacking Kit Stack two or more enclosures of the same type using this stacking kit. Male and female parts attach to the threaded corner holes, and are simply joined together using a stainless steel clevis pin. Unistrut Kit Easy attachment to any structure using these two Unistrut rails. Simply use spring nuts supplied to bolt to your structure, without worrying about precise hole locations. Unistruts may be mounted top (shown here) or bottom.

6 Goldilocks TM How do we keep projectors from roasting when it s 50 C and there s no shade? And prevent condensation from destroying your projector overnight? Tempest s unique Goldilocks TM Operating System (patents pending) brings enclosure control to a new level. Goldilocks keeps the air temperature inside your enclosure just right, removing heat from the projector when the lamp is on or when the enclosure is heated by the sun. We re changing the air about every second. Goldilocks uses a heater to maintain a minimum temperature in cold climates. And Goldilocks tracks temperature and humidity 24/7, keeping relative humidity inside your enclosure just right by using heaters to raise the air temperature when needed, adapting constantly to prevent deadly condensation. New to these Fourth Generation enclosures, Goldilocks features a homogenizing blower that stirs the air periodically inside the enclosure when the projector is not in use, preventing hot and cold spots and further reducing condensation risk. Data Logging Also new with G4, Goldilocks logs all system events for a week, providing invaluable insights in the event of a field service issue. Data logs will be recorded longer term in the G4 System Manager (see below) and will be available locally via USB or remotely over a network or the internet. Remote Monitoring It s important to understand that most installations are running on factory default settings and are not connected to any kind of network. In many cases that s just fine, but in larger systems or mission-critical applications a remote monitoring sysyem is a lifesaver. reports everything it knows on the user interface display on the back door. Now you can get the same information remotely, in several different ways: TCP/IP Direct Plug in an Ethernet board to your, and now you can find out what s going on in the enclosure. Temperature, humidity, line voltage, current, projector, fan and heater status are just some of the data you can monitor using this feature. Use Tempest s prepackaged front end, write your own, or integrate with many popular projector control protocols. RS485 to TCP/IP For larger systems we offer a simple RS485 plug-in board so you can daisy-chain between groups of enclosures, bridging to Ethernet at one or more enclosure locations. Either way, Ethernet Ethernet LAN Local PC RS485 you get all the information we know about back in the control room. Web-based Monitoring Remote PC With the addition of a Tempest G4 System Manager (coming soon), the system now serves up a web page that can be monitored anywhere. With the G4 System Manager, Tempest will offer a real-time system monitoring service, alerting you by if anything happens to your system. And on your Smartphone! Not cool enough for you? System Manager will also feature a smartphone ap, so you can stay connected to your Tempest enclosures anytime, anywhere. RS485 RS485 RS485 (Daisy Chain) Smartphone RS485 Ethernet Ethernet LAN Local PC For more on DEC4, Goldilocks and remote monitoring, download the User Manual from

7 Ordering Guide Most projectors 5-8,000 ANSI lumens Landscape Portrait US P.US U.US IN P.IN U.IN 737x665x x358x x915x333 29x26x13in 27kg/59lb 29x12x25in 595x520x kg/77lb 36x36x13in 36kg/80lb 595x520x x20.5x9in x520x x20.5x9in 750 ordering Portrait enclosures ordering UST enclosures Most projectors 8-10,000 ANSI lumens 29kg/64lb 23.5x20.5x9in Ultra-Short Throw 37kg/81lb 44kg/97lb US P.US U.US IN P.IN U.IN 845x742x x409x x1003x395 33x29x15in 32kg/70lb 33x16x28in 695x595x x23.5x11in kg/75lb 40kg/88lb * All Schedule B Export Code: x40x16in 695x595x x23.5x11in 41kg/90lb x595x x23.5x11in 1000 ordering Portrait enclosures ordering UST enclosures 42kg/92lb CAD drawings and user manuals at 49kg/108lb

8 Landscape Ordering Guide Most projectors ANSI lumens Portrait US P.US U.US IN P.IN U.IN 1016x737x x483x x1016x457 40x29x17in 42kg/92lb 40x19x28in 45kg/99lb 890x595x305 35x23.5x12in x840x480 52x34x20in 50kg/110lb * All Schedule B Export Code: Options Ultra-Short Throw 40x40x18in 890x595x305 35x23.5x12in 53kg/117lb x595x305 35x23.5x12in 1800 ordering Portrait enclosures ordering UST enclosures 1300x840x480 52x34x20in 53kg/117lb 1300x1300x480 52x52x20in 61kg/134lb 52.TI Any Thermal Insulation Kit, recommended for hot or cold climates 51.EN Any Ethernet Communications Card 52.TR Blizzzard Truss Mounting Kit 52.TR Blizzzard Truss Mounting Kit 52.TR Blizzzard Truss Mounting Kit 51.SK Any Stacking kit (s stacked must be same type) 52.UR Pair of Unistrut Rails and hardware kit 52.UR Pair of Unistrut Rails and hardware kit 52.UR Pair of Unistrut Rails and hardware kit 0000.CL Any Custom Color - specify black, white or any RAL #, plus % gloss desired Replacement Filters 51.HF , 100 Replacement Filter, 11in [280] 51.HF Replacement Filter, 15.5in [390] Custom Colors All the enclosures in this brochure are shown in our popular standard light bronze finish. White, Black or any RAL color are available to special order. Made in the USA Tempest Lighting, Inc., June, 2016 In the interest of continuous product improvement, specifications are subject to change without notice Tempest Lighting, Inc., Wicks Street, Sun Valley, CA 91352, USA info@tempest.biz t: f: for CAD drawings and user manuals