Technical Information ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A. Neoprene Sheets...

Transcription

1 Technical Information ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A A Insulation Garfilm... section B B Insulation Nomex Films... section C Neoprene Sheets... section D C D Insulation Kapton Films... section E S-4210VS... section F E F

2 Section A: Thermally Cond. Insu. Caps & Tubes Technical Information Thermally Conductive Insulation Caps and Tubes Caps A Tubes 2

3 Section A: Thermally Cond. Insu. Caps & Tubes Technical Information Item test method unit value Caps Color - - grey Density ASTM D > 1,6 Breakdown voltage ASTM D-149 KV / 6,8 Hardness ASTM D-2240 Shore A 70 ± 5 Thermal conductivity ASTM D-5470 W / (m K) 1,8 Operating temperature EN344 C -40 ~ +250 Flaability UL94 - V-0 Tensile strength ASTM D-412 Kg / cm 2 30 ± 3 Heat resistance ASTM D-5470 C - in 2 0,4 Tubes Color - - grey Continuous use temperature TGA+DMA C -40 ~ +250 Thermal conductivity ASTM D-5470 W / (m K) 1,2 A Volume resistivity ASTM D-257 Ω 1014 Breakdown voltage ASTM D-149 KV / 6 Hardness ASTM D-2240 Shore A 75 ± 5 Specific gravity ASTM D-792-2,1 Tensile strength ASTM D-412 Kg / cm 2 28 Elongation ASTM D-412 % 400 Flaability UL Hz Dielectric constant ASTM 1KHz - 1MHz 3

4 Section A: Thermally Cond. Insu. Caps & Tubes Technical Information SPEC DIAGRAPH Caps d b a c Tubes e A f Dimensions unit TO-220B TO-3PA Caps a b c d Tubes e f 16 ± 0,3 28,5 ± 0,4 11,5 ± 0,25 17,5 ± 0,3 5,9 ± 0,2 5,9 ± 0,2 0,5 ± 0,025 0,5 ± 0,025 0,5 ± 0,025 0,5 ± 0, ± 0,5 20,5 ± 0,5 4

5 Section B: Insulation Garfilm Technical Information Insulation Garfilm Garfilm is a polyester film with excellent physical, chemical and electrical properties. EM6-type has been expressly developed to be used as an insulator in electrical machines up to class B (130 C). Because of its outstanding properties, dielectric and mechanical, EM6 is the right product for motor insulation (slot insulation and closure). Item test method unit EM6 EM6 General Nominal thickness - 0,250 0,350 Color - - white Density ASTM D-1505 g / cc 1,4 Water absorption (max) ASTM D-570 % 0,6 Properties thermal Shrinkage with heat (MD) (1) Shrinkage with heat (TD) (2) Melung point ASTM D-1204 % 1 ASTM D-1204 % 0,4 DTA C 255 B Properties electrical Breakdown voltage (on 2 brass electrod) Surface resistivity ASTM D-257 Ω ASTM D-149 kv 19,5 22, Volume resistivity ASTM D-257 Ω cm Dielectric constant (3) ASTM D-150-3,3 Dissipation factor (3) ASTM D-150-0,003 (1) Machine 150 C for 30 minutes. (2) Transverse 150 C for 30 minutes. (3) 50Hz, 25 C. 5

6 Section C: Insulation Nomex Films Technical Information Insulation Nomeex Films DuPont Nomex paper is an insulation paper for high temperatures (UL homologated up to 220 C) with high dielectric strength, mechanical toughness, flexibility and resilience, very good chemical compatibility. Nomex T410 is the base type, mechanically more resistant and with stronger dielectric properties. Nomex T411 is the uncalendered version of T410. Item test method unit T410 T411 T411 Nominal thickness Dielectric strength AC rapid rise (1) Dielectric strength Full wave impulse - 0,30 0,38 0,58 ASTM D-149 kv / ASTM D-3426 kv / Dielectric constant at 60 Hz ASTM D-150-2,9 1,3 1,3 Dielectric constant at 1 khz ASTM D ,4 1,4 Dissipation factor at 60 Hz (x10-3 ) ASTM D C Dissipation factor at 1 khz (x10-3 ) Flaability (2) ASTM D UL94 - V-0 V-0 V-0 Density - g / cc 1,00 0,31 0,31 (1) Using 50 electrodes, rapid rise; corresponds with IEC subclause 9.1 except for electrode set-up of 50. (2) File no. E

7 Section D: Neoprene Sheets Technical Information Neoprene Sheets Neoprene sheets show a very good conformability and thermal insulation, so they can be used to create a thermal path preventing the heat from going where it could affect or even damage crytical components. Item test method unit index value Color - - black Cellular structure - - closed Thickness Density ASTM D-3575 g / cm 3 0,150 ± 0,025 Thermal Conductivity - W / (m K) 0,04 Hardness ASTM D-2240 Shore00 50 ± 5 50% compression set (1) ASTM D-1056 % 25,00 Water absorption ASTM D-1056 % 2, < 5 Flaability UL94 - HF1-class (1) T amb D 7

8 Section E: Insulation Kapton Films Technical Information Insulation Kapton Films The polymide film is produced by casting method, which possesses excellent low&high temperature resistant, atomic radiation resistant and dielectric property widely used for insulation in H-class motor, electrical apparatus and other purpose electronic engineering. Standard thickness 25 μm 40 μm 50 μm 75 μm 100 μm Item test method unit value 25 μm 40 μm 50 μm 75 μm 100 μm Density - g / cm 3 1,4 ± 0,02 Tensile strength portrait 135 M Pa landscape 115 Elongation at rupture MD (1) & TD (2) % 35 Contraction rate Breakdown 150 C C 3 average value MV / m individual value Surface 200 C Ω E 8 Volume 200 C Relative dielectric Hz - Dissipation Hz - Long-term heat resistance temperature index (1) Machine Direction. (2) Transverse Direction. Ω m ,5 ± 0,

9 Section F: S-4210VS ADHESIVE Technical Information S-4210VS ADHESIVE S-4210VS is a modified, solvent free acrylic adhesive. The VS-adhesive has an excellent direct tack and continuous adhesive strength. Good dynamic and static shear strength. On most surfaces, no plasticizer migration. Good temperature, UV and age-resistance. Maximum temperature resistance is +120 C for long term usage, and up to 200 C for short term usage. Support Now-woven, 12 g / m 2 Interliner Thickness Release paper, yellow, 90 g / m 2 0,10 Adhesive strength (AFERA 4001) 13 N / 25 Adhesive-weight 90 g / m 2 Temperature resistance C (long term usage) C (short term usage) F 9

10