Thermo-silicone caps and tubes
|
|
- Arleen Andrews
- 5 years ago
- Views:
Transcription
1 02 and tubes of the S, C and A series and thermo-silicone tubes of the A series are made of silicone filled with highly thermally conductive ceramics. All-round electric insulation of the component ensures optimal protection (depending on material gauges) against electrical breakdown, while reducing total thermal resistance to the cooling device (heat sink or chassis). are available in different sizes to fit standards TO 220, TO 3P and TO 247. Thermosilicone tubes are available in different diameters. Caps and tubes are ideal for use with Kunze POWER- CLIPS. Application Examples Thermal linkage and electric insulation of heat sources and heat sinks in: Thermal Resistance Overview Caps Power modules Power supplies Electric drives Telecommunication modules Engine control Frequency converters UPS 30
2 Thermo-silicone interface materials and tubes High-performance thermally conductive soft-silicone films Thermally conductive silicone-free films Thermally conductive phasechange materials (CRAYOTHERM ) Graphite films EMI-shielding materials Thermal Resistance Overview tubes Other products POWERCLIPS Heat sinks 31
3 1.1 A series Kunze thermo-silicone caps of the A type are made of silicone filled with thermally conductive ceramics. Their implementation allows for low thermal resistance. Owing to their high dielectric strength, thermo-silicone caps of the A type are used in applications with high requirements regarding electrical insulation. Ideal for use with Kunze POWERCLIPS. Properties Good thermal conductivity Low thermal resistance Very flexible Reliable all-round insulation Very high dielectric strength Clean and easy mounting, high process reliability UL flammability rating: UL 94 V0 We disclaim all liability for the correctness of the information contained herein. We reserve the right to make technical changes without notice. For explanatory notes regarding voltage ramp / step, see page 152 Part KU- A 30 A 45 A 80 General Properties Material Filler Colour Silicone Thermally conductive ceramic Gauge mm to to to Grey Mechanical Properties Tensile strength MPa Tear strength kn / m Electrical Properties Breakdown voltage (Voltage ramp) 1 V (AC) Breakdown voltage (Voltage steps) 2 V (AC) Volume resistivity Ωm 1.0 x x x Dielectric constant (1 khz) Flammability rating UL 94 V0 UL 94 V0 UL 94 V0 1 Voltage ramp 1000 V / s 2 Step-by-step voltage increments until dielectric breakdown Thermal Properties Thermal conductivity W / mk Thermal resistance (inch 2 ) ºC / W Operating temperature ºC -60 to to to
4 1.1 and tubes A series Image may differ from the original product. Available Cap Configurations and Dimensions (External dimensions) All dimensions in mm. KU 7-700/AXX/CP KU 7-723/16/AXX/CP KU 7-723/AXX/CP KU 7-724/AXX/CP TO-3P/TO-247 On request Other dimensions 33
5 1.5 C series Kunze thermo-silicone caps of the C type are made of silicone filled with highly thermally conductive ceramics. Their excellent thermal properties and high dielectric strength make them perfect for most applications. Ideal for use with Kunze POWERCLIPS. Properties High thermal conductivity Very low thermal resistance Very flexible Reliable all-round insulation High dielectric strength Clean and easy mounting, high process reliability UL flammability rating: UL 94 V0 We disclaim all liability for the correctness of the information contained herein. We reserve the right to make technical changes without notice. For explanatory notes regarding voltage ramp / step, see page 152 Part KU- C 30 C 45 C 80 General Properties Material Filler Colour Silicone Thermally conductive ceramic Salmon Gauge mm to to to Mechanical Properties Tensile strength MPa Tear strength kn / m Electrical Properties Breakdown voltage (Voltage ramp) 1 V (AC) Breakdown voltage (Voltage steps) 2 V (AC) Volume resistivity Ωm 3.2 x x x Dielectric constant (1 khz) Flammability rating UL 94 V0 UL 94 V0 UL 94 V0 1 Voltage ramp 1000 V / s 2 Step-by-step voltage increments until dielectric breakdown Thermal Properties Thermal conductivity W / mk Thermal resistance (inch 2 ) ºC / W Operating temperature ºC -60 to to to
6 1.5 and tubes C series Image may differ from the original product. Available Cap Configurations and Dimensions (External dimensions) All dimensions in mm. KU 7-723/16/CXX/CP KU 7-723/CXX/CP KU 7-724/CXX/CP TO-3P/TO-247 On request Other dimensions 35
7 2.0 S series Kunze thermo-silicone caps of the S series are made of silicone filled with high-performance thermally conductive ceramics. Total thermal resistance is minimized due to the material s flexibility and its adaptability to contact surfaces. Owing to their very high thermal conductivity and very low thermal resistance, thermo-silicone caps of the S type are employed in applications with the highest technical requirements. Ideal for use with Kunze POWERCLIPS. Properties Excellent thermal conductivity Minimal thermal resistance Very flexible Reliable all-round insulation Clean and easy mounting, high process reliability UL flammability rating: UL 94 V0 We disclaim all liability for the correctness of the information contained herein. We reserve the right to make technical changes without notice. For explanatory notes regarding voltage ramp / step, see page 152 Part KU- S 30 S 45 S 80 General Properties Material Filler Colour Silicone Thermally conductive ceramic Brown Gauge mm to to to Mechanical Properties Tensile strength MPa Tear strength kn / m Electrical Properties Breakdown voltage (Voltage ramp) 1 V (AC) Breakdown voltage (Voltage steps) 2 V (AC) Volume resistivity Ωm 3.5 x x x Dielectric constant (1 khz) Flammability rating UL 94 V0 UL 94 V0 UL 94 V0 1 Voltage ramp 1000 V / s 2 Step-by-step voltage increments until dielectric breakdown Thermal Properties Thermal conductivity W / mk Thermal resistance (inch 2 ) ºC / W Operating temperature ºC -60 to to to
8 2.0 and tubes S series Image may differ from the original product. Available Cap Configurations and Dimensions (External dimensions) All dimensions in mm. KU 7-723/16/SXX/CP KU 7-723/SXX/CP KU 7-724/SXX/CP TO-3P/TO-247 On request Other dimensions 37
9 1.1 Thermo-silicone tubes A series Kunze thermo-silicone tubes of the A type are made of silicone, filled with thermally conductive ceramics. Their implementation allows for low total thermal resistance. Owing to their very high dielectric strength, thermo-silicone tubes of the A type are used in applications with high requirements regarding electrical insulation. Ideal for use with Kunze POWERCLIPS. Properties Good thermal conductivity Low thermal resistance Reliable all-round insulation Very high dielectric strength Very flexible Clean and easy mounting UL flammability rating: UL 94 V0 We disclaim all liability for the correctness of the information contained herein. We reserve the right to make technical changes without notice. For explanatory notes regarding voltage ramp / step, see page 152 Part KU- A 30 A 45 A 80 General Properties Material Filler Colour Silicone Thermally conductive ceramic Gauge mm to to to Grey Mechanical Properties Tensile strength MPa Tear strength kn / m Electrical Properties Breakdown voltage (Voltage ramp) 1 V (AC) Breakdown voltage (Voltage steps) 2 V (AC) Volume resistivity Ωm 1.0 x x x Dielectric constant (1 khz) Flammability rating UL 94 V0 UL 94 V0 UL 94 V0 1 Voltage ramp 1000 V / s 2 Step-by-step voltage increments until dielectric breakdown Thermal Properties Thermal conductivity W / mk Thermal resistance (inch 2 ) ºC / W Operating temperature ºC -60 to to to
10 1.1 and tubes Thermo-silicone tubes A series Image may differ from the original product. Available forms By the metre Cut to customer specifications On request Other dimensions Available tube diameters All dimensions in mm. 39
RF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationKERATHERM Thermal Management Solutions. Innovation in Technology and Environmental Protection
KERATHERM Thermal Management Solutions Innovation in Technology and Environmental Protection The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application
More informationKERATHERM Thermal Management Solutions
KERATHERM Thermal Management Solutions Innovation in Technology and Environmental Protection 1 KERATHERM The information provided in this Technical Data Sheet (TDS) including the recommendations for use
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationPower Resistors for Mounting Onto a Heatsink Thick Film Technology
Power Resistors for Mounting Onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationTypical Properties T Method
CHO-THERM High Power Thermally Conductive Electrical Insulator Pads Description CHO-THERM HIGH-POWER THERMAL INSULATOR PADS are thermally conductive materials designed for use where the highest possible
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationHigh Ohmic/High Voltage Resistors
High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES Small size High reliability Wide range of capacitance values APPLICATIONS Induction and dielectric heating Antenna units Filter, bypass,
More informationTIM. Thermal Interface Material. Stock Code: Total Solution for Thermal Interface Material
Stock Code: 300602 TIM Interface Material Total Solution for Interface Material ly Conductive Solution Provider ISO 9001 : 2008 ISO 14001 : 2004 QC 080000 : 2012 OHSAS 18001 : 2007 ISO/TS 16949 : 2009
More informationPower Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
T. 045090, T. 04520, T. 04550 RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES High reliability Multiple terminals Wide range of capacitance values APPLICATIONS Induction and dielectric
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationHigh-Voltage Types Ordering Information, Mica Capacitors
High-Voltage Types Ordering Information, Mica Capacitors Ordering Information Ordering Information: Order by complete part number, as below. For other options,write your requirements on your quote request
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 Ωto 1 MΩ Non inductive Easy mounting Low thermal radiation of the case
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationTHERMAL ANALYSIS AND OPTIMIZATION OF THERMAL PAD THICKNESS FOR TRANSISTOR MOUNTING IN FOR CPU S
ISSN Number (online): 2455-4650 THERMAL ANALYSIS AND OPTIMIZATION OF THERMAL PAD THICKNESS FOR TRANSISTOR MOUNTING IN FOR CPU S S. Balakrishnan *, M. Manikandan *Corresponding Author Department of Mechanical
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationSDT800-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of two phototransistors, each optically coupled to a light emitting diode for DC input operation. Optical coupling between the input IR LED and output phototransistor allows for
More informationTechnical Information ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A. Neoprene Sheets...
Technical Information 2011.1 ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A A Insulation Garfilm... section B B Insulation Nomex Films... section C Neoprene Sheets...
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationAxial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with
More informationHigh Voltage MLC Chips
NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet
More informationCeramic Disc Capacitors Class 1, 3 kv DC
S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC
More informationDRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationSurface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
More informationApplications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
AC Line EMI Suppression and RC Networks P410 Series, Integrated Resistor, Metallized Impregnated Paper, Class X1, 300 VAC Overview Applications The P410 Series is constructed of multilayer metallized paper
More informationOver Current Protection Circuits Voltage controlled DC-AC Inverters Maximum operating temperature of 175 C
Description United Silicon Carbide, Inc offers the xj series of high-performance SiC normally-on JFET transistors. This series exhibits ultra-low on resistance (R DS(ON) ) and gate charge (Q G ) allowing
More informationVPR221SZ (Z-Foil) Vishay Foil Resistors
Ultra High Precision Bulk Metal Z-Foil Surface Mount Power Resistor in TO-220 Configuration with TCR of ± 0.05 ppm/ C, PCR of 4 ppm/w and Load Life Stability of ± 0.005 % (50 ppm) INTRODUCTION The Z-Foil
More informationThermal Interface Materials (TIMs) for IC Cooling. Percy Chinoy
Thermal Interface Materials (TIMs) for IC Cooling Percy Chinoy March 19, 2008 Outline Thermal Impedance Interfacial Contact Resistance Polymer TIM Product Platforms TIM Design TIM Trends Summary 2 PARKER
More informationATE A TEC Module
TEC Modules TEC Module Figure. The Photo of Actual FEATURES Maximum Input Voltage:. V Low Cost Long Life Time % Lead (Pb)-free and RoHS Compliant APPLICATIONS Regulate the temperature of the target object
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
More informationOver Current Protection Circuits Voltage controlled DC-AC Inverters Maximum operating temperature of 175 C
Description xj SiC Series 8mW - 12V SiC Normally-On JFET UJN128Z Die Form United Silicon Carbide, Inc offers the xj series of high-performance SiC normally-on JFET transistors. This series exhibits ultra-low
More informationTechnology Brief 9: Capacitive Sensors
218 TEHNOLOGY BRIEF 9: APAITIVE SENSORS Technology Brief 9: apacitive Sensors To sense is to respond to a stimulus. (See Tech Brief 7 on resistive sensors.) A capacitor can function as a sensor if the
More informationFeatures of Uni-Thermo
Pelti ier Device in the 21st Uni-Thermo Century Hi eliability NTENTS Comparison with a Conventional Peltier Device. The Result of Operating Reliability Test Peltier Device Uni-Thermo Quality Chart Peltier
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationV30100S-E3, VF30100S-E3, VB30100S-E3, VI30100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V3000S-E3, VF3000S-E3, VB3000S-E3, VI3000S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.39 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low
More informationC 052 C 272 F 2 G 5 T A Rated Voltage (VDC) 1 = = 200. Capacitance Tolerance 1. D = ±0.5 pf F = ±1% G = ±2% J = ±5% K = ±10%
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in C0G dielectric feature
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated
More informationV20100S-E3, VF20100S-E3, VB20100S-E3, VI20100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V200S-E3, VF200S-E3, VB200S-E3, VI200S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.446 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low forward
More informationWatercooled RF Power Pot Capacitors External Cooling System
Watercooled RF Power Pot Capacitors External Cooling System FEATURES High voltage, current, and power ratings Compact design reduces terminal self inductance and permit operation up to higher frequencies
More informationHigh Voltage MLC Chips
HOW TO ORDER NEW 630V RANGE 1808 A A 271 K AVX Voltage Temperature Capacitance Code Capacitance Style 600V/630V = C Coefficient (2 significant digits Tolerance 0805 1000V = A NPO (C0G) = A + no. of zeros)
More informationAnalog Technologies. ATEC1 49 Circular TEC Modules
Figure 1.1. The Photo of Actual Sealed Figure 1.2. The Photo of Actual Sealed FEATURES Circular shape with a center hole High Maxim Voltage/Current Ratio: 5.5 V / 3A Long Life Time APPLICATIONS Stabilize
More informationDirect Water Cooled Wirewound Resistor
Direct Water Cooled Wirewound Resistor FEATURES Direct cooling without heatsink Excellent power / volume ratio Multi resistive element option Material categorization: for definitions of compliance please
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationRecommended Hole Pattern: [mm]
Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 680 nf ±10% Rated Voltage U R 400 V (DC) Insulation
More informationThe T-lam System. T-guide for Performance
The T-lam System T-guide for Performance Part I: Design Guidelines for Performance & Reliability with Thermagon IMpcb and 1KA Dielectric Samples sent in twenty-four hours. Solutions that change a world.
More informationZener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box
Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes
More informationFEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationDiscoidal Capacitors. Multilayer Discoidal
Discoidal Capacitors Ceramic discoidal feed-through capacitors are the building blocks of the EMI filter industry. API s Spectrum Control discoidal capacitors provide great versatility in meeting varied
More informationSmall Signal Zener Diodes, Dual
DZ-G Series Small Signal Zener Diodes, Dual PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T specification Pulse current Int. construction Dual common cathode FEATURES Dual silicon
More informationHigh Voltage Trench MOS Barrier Schottky Rectifier
High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 A TO-220AB DESIGN SUPPORT TOOLS Models Available PIN PIN 3 NC A V2000SG PRIMARY CHARACTERISTICS I F(AV) 20 A V RRM 00
More informationTYPE. 250 ppm / 200 ppm / rated dissipation at T amb = ppm / 200 ppm / 250 ppm / 200 ppm /
FEATURES Overload protection without risk of fire wide range of overload currents. APPLICATIONS TV, Monitor, Audio, Video DESCRIPTION A homogeneous film of metal alloy is Deposited on a high grade ceramic
More informationSmall Absolute Pressure Sensor
Small Absolute Pressure Sensor SM5420E Series FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 95 millivolt span Constant current or constant voltage drive or non-ported
More informationMOC8101, MOC8102, MOC8103, MOC8104, MOC8105 Optocoupler, Phototransistor Output, no Base Connection
MOC80, MOC80, MOC803, MOC80, MOC80 Optocoupler, Phototransistor Output, no Base Connection i79009- DESCRIPTION The MOC80, MOC80, MOC803, MOC80, MOC80 family optocoupler consisting of a gallium arsenide
More informationxr SiC Series 1200 V Schottky Diode Platform 15A, 10A, 5A / 30A, 20A
12 V Schottky Diode Platform 15A, 1A, 5A / 3A, 2A 12 V xr SiC Series 12 V-15A, 1A, 5A / 3A, 2A Schottky Diodes Product Qualification Report Summary This report delineates the reliability and qualification
More informationASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED. Datasheet
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet Description The Avago Technologies ASMT-UYBx series 0.25W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
More informationR.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/
Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Ultra-High Isolation DIP, Single & DC/DC s Key Features Low Cost 6 Isolation MTBF > 6, Hours Short Circuit Protection Input, and 24 Output,, 1, {, { and {1 Regulated Outputs Low Isolation Capacitance
More informationApplications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
More informationMetallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B
Replaces CKM 501 B series Applications & Characteristics Railway signalling High-temperature (125 C) High capacitance stability Harmonized circuits Filtering High-reliability circuits Security applications
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
VP0 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.43 V at I F = 5 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode FEATURES Very low profile - typical height
More informationAC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
HAA HAA3 HAA2 HAA4 DESCRIPTION The HAAX series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. FEATURES Bi-polar
More informationMLCC with FLEXITERM. General Specifications GENERAL DESCRIPTION APPLICATIONS PRODUCT ADVANTAGES HOW TO ORDER
General Specifications GENERAL DESCRIPTION With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical
More informationNTC Thermistors, Accuracy Line
FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio Old part number was 2322 640 3/4/6... Component in accordance to RoHS 2002/95/EC and WEEE
More informationVT-4B1. Aluminum Base Laminate/RCF (Resin Coated Film) Page 1 of 5 CORPORATE HEADQUARTERS
38 TaiShan Rd, T: +86 512-689181 Massachusetts, MA 1913, T: +1 978-52197 Page 1 of 5 Published on: 18/2/217 General Information > Thermal conductivity -- 1.W/mK > Ceramic Filled > Halogen Free > Flammability
More informationApplications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.
AC Line EMI Suppression and RC Networks P409 Series, Integrated Resistor, Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The P409 Series is constructed of multilayer metallized paper
More informationGraphene-Rubber Composites
Rev:2016-11-12 Ver.1.0.0 Graphene-Rubber Composites Product Features Rubber material is one of the most important and widely deployed materials. It is utilized in high- tech products, military defense
More informationOver current protection circuits Voltage controlled DC-AC inverters Maximum operating temperature of 175 C
Description United Silicon Carbide, Inc offers the high-performance G3 SiC normallyon JFET transistors. This series exhibits ultra-low on resistance (R DS(ON) ) and gate charge (Q G ) allowing for low
More informationMOC205-M MOC206-M MOC207-M MOC208-M
DESCRIPTION These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package.
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationSmall Signal Zener Diodes, Dual
Small Signal Zener Diodes, Dual DESIGN SUPPORT TOOLS Models Available PRIMARY CHARACTERISTICS 6 PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current Circuit configuration Dual
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationPHOTODARLINGTON OPTICAL INTERRUPTER SWITCH
HB HB HB3 PACKAGE DIMENSIONS 0.7 (.0) 0.57 (.6) C L 0.9 (6.35) 0.3 (6.5) D E C L 0.39 (.00) 0.3 (0.85).33 (3.38).073 (.85) 0.9 (3.3) 0.9 (3.0) 0.33 (.0) 0. (0.7) Optical C L 0.5 (3.) 0.9 (3.0).35 (8.00).95
More informationFusible, Non-Flammable Metal Film Leaded Resistors
Fusible, Non-Flammable Metal Film Leaded Resistors DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned
More informationSmall Gage Pressure Sensor
Small Gage Pressure Sensor FEATURES Improved stability with integrated field shields Small SO8 surface-mount package 90 millivolt output Constant current or constant voltage drive Ported configuration
More informationPOWER FACTOR CORRECTION CAPACITOR CELLS SPECIFICATIONS
SPECIFICATIONS DESCRIPTION Metallized polypropylene capacitors offer improved performance and proven reliability in applications requiring power factor correction or harmonic filtering. Metallized polypropylene
More informationOver current protection circuits Voltage controlled DC-AC inverters Maximum operating temperature of 175 C
Description United Silicon Carbide, Inc offers the high-performance G3 SiC normallyon JFET transistors. This series exhibits ultra-low on resistance (R DS(ON) ) and gate charge (Q G ) allowing for low
More informationOver current protection circuits Voltage controlled DC-AC inverters Maximum operating temperature of 175 C
Description United Silicon Carbide, Inc offers the high-performance G3 SiC normallyon JFET transistors. This series exhibits ultra-low on resistance (R DS(ON) ) and gate charge (Q G ) allowing for low
More informationEpoxy resins for electrotechnical applications
Epoxy resins for electrotechnical applications Epoxy resins for electrotechnical applications ELANTAS Europa offers a complete range of of products that can be used in in electrical engineering for the
More informationProduction of 2G HTS Conductor at SuperPower: Recent Progress and Ongoing Improvements
superior performance. powerful technology. Production of 2G HTS Conductor at SuperPower: Recent Progress and Ongoing Improvements Traute F. Lehner, Sr. Director of Marketing 7 th MEM Workshop (Mechanical
More information