Small Signal Zener Diodes, Dual
|
|
- Britton Scott
- 6 years ago
- Views:
Transcription
1 DZ-G Series Small Signal Zener Diodes, Dual PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T specification Pulse current Int. construction Dual common cathode FEATURES Dual silicon planar Zener diodes, common cathode The Zener voltages are graded according to the international E standard. Standard Zener voltage tolerance is ± %. The parameters are valid for both diodes in one case. and R zj of the two diodes in one case is % AEC-Q qualified ESD capability according to AEC-Q: Human body model > 8 k Machine model > 8 Base P/N-G - green, commercial grade Material categorization: For definitions of compliance please see ORDERING INFORMATION DEICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY DZ-G-Series DZC-G-8 to DZC-G-8 (8 mm tape on " reel) DZC-G-8 to DZC-G-8 (8 mm tape on " reel) PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING SOT- 8. mg UL 9 - MOISTURE SENSITIITY LEEL MSL level (according J-STD-) SOLDERING CONDITIONS 6 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL ALUE UNIT Power dissipation Thermal resistance, junction to ambient air Device on fiberglass substrate, see layout on page 6 Device on fiberglass substrate, see layout on page 6 P tot mw R thja K/W Junction temperature C Storage temperature range T stg - 6 to + C Operating temperature range T op - to + C Zener current P tot / Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 DZ-G Series ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER OLTAGE RANGE () TEST CURRENT REERSE OLTAGE DYNAMIC RESISTANCE f = khz TEMPERATURE COEFFICIENT OF ZENER OLTAGE at T T T R at I R Z Z at T Z ZK at T Z at T na - / C MIN. NOM. MAX. MAX. MAX. MAX. MIN. MAX. DZC-G (< 8) < DZC-G (< 9) < DZC-G (< 9) < DZC6-G (< 9) < DZC9-G (< 9) < - - DZC-G (< 9) < DZC-G (< 8) < - DZC-G >.8 (< 6) < 8 - DZC6-G > (< ) < - 6 DZC6-G >.8 (< ) < - DZC68-G >. (< 8) < DZC-G..9 > (< ) < DZC8-G > 6. (< ) < DZC9-G >.8 (< ) < 8 DZC-G 9..6 >.. (< ) < 8 DZC-G 6..6 > 8. 6 (< ) < 9 DZC-G.. > 9 (< ) < DZC-G 8.. > 9 (< ) < 9 DZC-G > (< ) < 9 DZC6-G > (< ) < 8 9. DZC8-G > 8 (< ) < 8 9. DZC-G > (< ) < 8 DZC-G 6.8. > (< ) < 8 DZC-G > 8 8 (< 8) < 8 DZC-G > (< 8) < 8 DZC-G 66 8 >. (< 8) < 8 DZC-G 6 > (< 8) < 8 DZC6-G > (< 9) < 8 DZC9-G 69 9 > 9 (< 9) < DZC-G 6 > 6 (< ) < DZC-G > (< ) < DZC-G 8 > 8 (< ) < Note () Tested with pulses t p = ms Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 DZ-G Series TYPICAL CHARACTERISTICS (T amb = C, unless otherwise specified) I F = C = C F Fig. - Forward Characteristics r zj. 89 = C 8 6.8/8. 6. Fig. - Dynamic Resistance vs. Zener Current mw = C P tot R zj C 8 T amb Fig. - Admissible Power Dissipation vs. Ambient Temperature. 8 Fig. - Dynamic Resistance vs. Zener Current r zj = C Fig. - Dynamic Resistance vs. Zener Current R zth 8 R zth = R tha x x negative positive at = Fig. 6 - Thermal Differential Resistance vs. Zener oltage Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 DZ-G Series R zj 8 = C = m/ C 8 6 = Fig. - Dynamic Resistance vs. Zener oltage Fig. - Temperature Dependence of Zener oltage vs. Zener oltage m/ C - 8 = Fig. 8 - Temperature Dependence of Zener oltage vs. Zener oltage = C 86 Fig. - Change of Zener oltage vs. Junction Temperature at = C = R zth x at = Fig. 9 - Change of Zener oltage vs. Junction Temperature Fig. - Change of Zener oltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 DZ-G Series = R zth x = l Z 8 = C = Test current Fig. - Change of Zener oltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage 8 Fig. - Breakdown Characteristics l Z = C l Z 8 6 Test current 9 = C Test current Fig. - Breakdown Characteristics Fig. 6 - Breakdown Characteristics LAYOUT FOR R thja TEST Thickness: fiberglass.9" (. mm) Copper leads." (. mm). (.) (.) (.) (.) (.8) (.8) (.) (.9).8 (.) (.). (.6). (.) Rev.., -Mar- Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 DZ-G Series PACKAGE DIMENSIONS in millimeters (inches): SOT-. (.).8 (.). (.) max.. ref. (. ref.). (.).98 (.). (.8). (.).9 (.). (.8). (.). (.8). (.). (.). (.).6 (.). (.9) to 8. (.8). (.). (.6). (.) Foot print recommendation:. (.8) (.9).9 (.) (.9).9 (.) (.9).9 (.) Document no.: Rev. 8 - Date:.Sept (.).9 (.) Rev.., -Mar- 6 Document Number: 889 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. ISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERED Revision: 8-Feb- Document Number: 9
Small Signal Zener Diodes, Dual
Small Signal Zener Diodes, Dual DESIGN SUPPORT TOOLS Models Available PRIMARY CHARACTERISTICS 6 PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current Circuit configuration Dual
More informationSmall Signal Zener Diodes
BZT-G-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT FEATURES Silicon planar power Zener diodes The Zener voltages are graded according to the international E standard AEC-Q
More informationSmall Signal Zener Diodes
BZT-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T.; ma specification Pulse current Int. construction Single FEATURES Silicon planar Zener diodes
More informationSmall Signal Zener Diodes, Dual
DZ-V-G Series Small Signal Zener Diodes, Dual PRIMERY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current FEATURES Dual silicon planar Zener diodes, common
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes BZX8-G-Series PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener diodes
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes DESIGN SUPPORT TOOLS click logo to get started FEATURES Very sharp reverse characteristic Low reverse current level Available with tighter tolerances Very high stability Low noise
More informationZener Diodes FEATURES APPLICATIONS
Zener Diodes SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 00 V Test current I ZT.7 to 80 ma V BR 5. to 95 V V WM 4.7 to 90 V P PPM 40 W T J max. 50 C V Z specification
More informationZener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box
Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise TZMC-
More informationSmall Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT 2.5; 5 ma V Z specification Pulse current Int. construction Single FEATURES Saving space
More informationParameter Test condition Symbol Value Unit Power dissipation P tot 300 1) mw
DZ-V-Series Small Signal Zener Diodes, Dual Features These diodes are available in other case styles and configurations including: the dual diode common anode configuration with type designation AZ, the
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise AEC-Q qualified Compliant to RoHS Directive 22/95/EC and in accordance to WEEE
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More information4-Line BUS-Port ESD-Protection
4-Line BUS-Port ESD-Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = Pin 1 marking XX = Date code YY = Type code (see table below) 2453 1 XX YY 211 FEATURES Ultra compact LLP75-6L package 4-line
More informationDual High-Voltage Trench MOS Barrier Schottky Rectifier
Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.53 V at I F = 5.0 A 2 TMBS esmp Series Top View PIN PIN 2 PRIMARY CHARACTERISTICS K Bottom View I F(AV) 2 x A V RRM 0 V I FSM 50
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
VP0 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.43 V at I F = 5 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode FEATURES Very low profile - typical height
More informationTwo-Line ESD Protection in SOT-23
Two-Line ESD Protection in 2 3 20456 MARKING (example only) YYY = type code (see table below) XX = date code 1 XX YYY XX 20512 20357 1 FEATURES Two-line ESD-protection device ESD-protection acc. IEC 61000-4-2
More informationDual Low-Voltage Trench MOS Barrier Schottky Rectifier
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.3 V at I F = 5.0 A 2 TMBS esmp Series SMPD (TO-263AC) Top View PIN PIN 2 K K Bottom View HEATSINK FEATURES Trench MOS Schottky technology
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationFEATURES. Heatsink. 1 2 Pin 1 Pin 2
Ultralow V F Ultrafast Rectifier, 8 A FRED Pt esmp Series 2 SlimDPAK (TO-252AE) k Heatsink k 2 Pin Pin 2 FEATURES Ultrafast recovery time, extremely low V F and soft recovery For PFC CCM operation Low
More informationTrench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.3 V at I F = 5 A TMBS esmp Series FEATURES Trench MOS Schottky technology Very low profile - typical height of.7
More informationHigh Current Density Surface-Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface-Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0. V at I F = A FEATURES Trench MOS Schottky technology Available 8 Low forward voltage drop, low power losses High
More informationSilicon PIN Photodiode, RoHS Compliant
Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with enhanced sensitivity for visible light. It is a low profile surface-mount device (SMD) including the chip with
More informationSilicon PIN Photodiode
VEMD550CF Silicon PIN Photodiode DESCRIPTION VEMD550CF is a high speed and high sensitive PIN photodiode. It is a low profile surface-mount device (SMD) including the chip with a 7.5 mm 2 sensitive area
More informationParameter Test condition Symbol Value Unit. Mounted on epoxy-glass hard tissue, fig µm copper clad, 0.9 mm 2 copper area per electrode
Small Signal Zener Diodes Features Saving space Hermetic sealed parts Electrical data identical with the devices BZT55..Series/TZM..Series Fits onto SOD-323/SOD- footprints Very sharp reverse characteristic
More informationV30100S-E3, VF30100S-E3, VB30100S-E3, VI30100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V3000S-E3, VF3000S-E3, VB3000S-E3, VI3000S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.39 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationV20100S-E3, VF20100S-E3, VB20100S-E3, VI20100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V200S-E3, VF200S-E3, VB200S-E3, VI200S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.446 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low forward
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBPW34S VBPW34SR 21733 VBPW34S and VBPW34SR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive
More informationHigh Voltage Trench MOS Barrier Schottky Rectifier
High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 A TO-220AB DESIGN SUPPORT TOOLS Models Available PIN PIN 3 NC A V2000SG PRIMARY CHARACTERISTICS I F(AV) 20 A V RRM 00
More informationMOC8101, MOC8102, MOC8103, MOC8104, MOC8105 Optocoupler, Phototransistor Output, no Base Connection
MOC80, MOC80, MOC803, MOC80, MOC80 Optocoupler, Phototransistor Output, no Base Connection i79009- DESCRIPTION The MOC80, MOC80, MOC803, MOC80, MOC80 family optocoupler consisting of a gallium arsenide
More informationHyperfast Rectifier, 1 A FRED Pt
Hyperfast Rectifier, 1 A FRED Pt SMF (DO-219AB) Cathode Anode FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 17 C maximum operating junction temperature Low forward voltage drop Low
More informationAutomotive N- and P-Channel 100 V (D-S) 175 C MOSFET
SQJ57EP Automotive N- and P-Channel V (D-S) 75 C MOSFET PRODUCT SUMMARY N-CHANNEL P-CHANNEL V DS (V) - R DS(on) ( ) at V GS = ± V.45 46 R DS(on) ( ) at V GS = ± 4.5 V.58.265 I D (A) 5-9.5 Configuration
More informationAutomotive N- and P-Channel 40 V (D-S) 175 C MOSFET
SQJ54EP Automotive N- and P-Channel 4 V (D-S) 75 C MOSFET 6.5 mm mm PowerPAK SO-8L Dual 5.3 mm D D 4 G 3 S G S FEATURES TrenchFET power MOSFET AEC-Q qualified % R g and UIS tested Material categorization:
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationSurface Mount ESD Capability Rectifier
Surface Mount ESD Capability Rectifier MSQPG, MSQPJ esmp Series op View Bottom View MicroSMP (DO-29AD) PRIMARY CHARACERISICS I F(AV).0 A V RRM 400 V, 600 V I FSM 5 A V F at I F =.0 A 0.99 V J max. 75 C
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationRF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationRuggedized Electrical Double Layer Energy Storage Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationTELUX LED FEATURES APPLICATIONS WAVELENGTH. (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
TELUX LED DESCRIPTION 9232 The TELUX series is a clear, non-diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More informationSingle Phase Fast Recovery Bridge (Power Modules), 61 A
VS-SA6BA60 Single Phase Fast Recovery Bridge (Power Modules), 6 A SOT-227 PRIMARY CHARACTERISTICS V RRM 600 V I O 6 A t rr 70 ns Type Modules - Bridge, Fast Package SOT-227 Circuit configuration Single
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationOptocoupler, Phototransistor Output, LSOP-4, 110 C Rated, Long Mini-Flat Package
TCLT11. Series Optocoupler, Phototransistor Output, LSOP-4, 11 C Rated, Long Mini-Flat Package 17295-5 DESCRIPTION The TCLT11. series consists of a phototransistor optically coupled to a gallium arsenide
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationN-Channel 20 V (D-S) MOSFET
N-Channel V (-S) MOSFET SiS6ENT 3.3 mm mm Top View PowerPAK -8S 3.3 mm 3 4 S G Bottom View PROUCT SUMMARY V S (V) R S(on) max. () at V GS = 4.5 V.39 R S(on) max. () at V GS = 3.7 V.4 R S(on) max. () at
More informationStandard Carbon Film Leaded Resistors
Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable
More informationParameter Test condition Symbol Value Unit Zener current (see Table "Electrical Characteristics") Power dissipation P tot 1.3
Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating e The Zener voltages are graded according to the international E standard. Replace
More informationOptocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package
TCMT11. Series Optocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package 22628-1 C E 4 3 1 2 DESCRIPTION The TCMT11. series consist of a phototransistor optically coupled to a gallium
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More information2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design
VBUS5M2-HT1 2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design 1 22814 3 MRKING (example only) Bar = cathode marking X = date code Y = type code (see
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationOptocoupler, Phototransistor Output, no Base Connection
Optocoupler, Phototransistor Output, no Base Connection FEATURES A C NC 1 2 3 6 5 4 NC C E Isolation test voltage, 5 V RMS No base terminal connection for improved common mode interface immunity Long term
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationHyperfast Rectifier, 8 A FRED Pt
Hyperfast Rectifier, 8 A FRED Pt L TO-0 FullPAK Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 8 A V R 600 V V F at I F.3 V t rr typ. 8 ns T J max. 75 C Package L TO-0 FullPAK Circuit configuration Single
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More informationElectrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole
More informationN-Channel 60 V (D-S) MOSFET
N-Channel 6 V (-S) MOSFET SiA6J 2. mm Top View PowerPAK SC-7-6L Single 2. mm 2 3 G Bottom View PROUCT SUMMARY V S (V) 6 R S(on) max. () at V GS = V.8 R S(on) max. () at V GS = 7. V.22 Q g typ. (nc) 6.9
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationAluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More informationN-Channel 150 V (D-S) MOSFET
N-Channel 5 V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) ( ) (MAX.) I (A) f Q g (TYP.) 5 3.3 mm.58 at V GS = V 2.2.85 at V GS = 7.5 V 6.6 PowerPAK 22-8S S S S 2 3 3.3 mm G 4 8 7 6 Bottom View 5 Ordering
More informationAluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
More informationN-Channel 30 V (D-S) MOSFET
N-Channel 3 V (-S) MOSFET PowerPAK 22-8 Single 8 5 6 7 FEATURES TrenchFET Gen IV power MOSFET % R g and UIS tested Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationSurface Mount ESD Capability Rectifiers
Surface Mount ESD Capability Rectifiers Top View esmp TM Series MicroSMP Bottom View PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 00 V, 200 V, 400 V, 600 V I FSM 20 A V F at I F =.0 A 0.925 V I R µa T J max.
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationAutomotive N-Channel 80 V (D-S) 175 C MOSFET
Automotive N-Channel 8 V (D-) 75 C MOFET 6.5 mm PowerPAK O-8L ingle 5.3 mm D 4 G 3 FEATURE TrenchFET power MOFET AEC-Q qualified % R g and UI tested Material categorization: for definitions of compliance
More informationN-Channel 30 V (D-S) MOSFET
New Product SiA462J N-Channel 3 V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) ( ) (Max.) I (A) a Q g (Typ.) 3 6.8 at V GS = V 2.2 at V GS = 6 V 2.22 at V GS = 4. V 2 PowerPAK SC-7-6L-Single 2. mm S 4 S
More informationOptocoupler, Photodarlington Output, High Gain, With Base Connection
End of Life January-208 - Alternative Device: CNY7 HB, HB2, HB3 Optocoupler, Photodarlington Output, High Gain, With Base Connection FEATURES A C NC 2 3 6 5 4 B C E Isolation test voltage: 4420 V RMS Coupling
More informationTELUX LED FEATURES. COLOR TEMPERATURE FORWARD VOLTAGE (mlm) at I F (V)
16 012 DESCRIPTION The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More informationTELUX LED FEATURES APPLICATIONS COORDINATE. FORWARD VOLTAGE (V) (ma) at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 0.33, 0.
TELUX LED DESCRIPTION The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More information