Energy Storage Double Layer Capacitors
|
|
- Hortense Davis
- 5 years ago
- Views:
Transcription
1 96 DLC Energy Storage Double Layer Capacitors FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double layer Radial leads, cylindrical case, insulated with a blue sleeve Available in both vertical and low-profile versions Unlimited charge and discharge cycle numbers No charge-discharge control circuitry and no series resistor necessary Maintenance-free, no periodic replacement or service necessary Ecologically beneficial (no Cd, no Li) Material categorization: for definitions of compliance please see APPLICATIONS Energy storage, for backup of semiconductor memories (CMOS) in all fields of electronics Telecommunication, audio-video, EDP General industrial, clock and timer systems MARKING The capacitors are marked with the following information: Rated capacitance (in F) Rated voltage (in V) Date code, in accordance with IEC 6006 Name of manufacturer Negative terminal identification Upper category temperature (at 8 C types only) QUICK REFERENCE DATA DESCRIPTION STANDARD FORM A HIGH VOLTAGE FORM A VALUE HIGH TEMPERATURE FORM A VERTICAL, MINIATURIZED FORM B Nominal case sizes (Ø D x L in mm) x 7 and x 7. x 9 and x 9 x 9 and x 9. x (vertical) Rated capacitance range, C R 0.07 F to.0 F 0.07 F to 0.68 F 0.07 F to 0.68 F 0.07 F to 0. F Tolerance on C R at 0 C -0 % to 80 % Rated voltage, U R. V 6. V. V. V Maximum surge voltage, U S 6. V 7.0 V 6. V 6. V Category temperature range - C to 70 C - C to 70 C - C to 8 C - C to 70 C Useful life at U R : at 8 C h - at 70 C 000 h 000 h 800 h 000 h at 0 C 8000 h 8000 h 000 h 8000 h at C 000 h 000 h h 000 h Shelf life at 0 V 000 h at upper category temperature Climatic category IEC / 070 / / 070 / / 08 / / 070 / Revision: -Mar-8 Document Number: 86 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 96 DLC SELECTION CHART FOR C R, U R, AND FORM AT UPPER CATEGORY TEMPERATURE (UCT) C R U FORM R =. V U R = 6. V (F) UCT = 8 C UCT = 70 C UCT = 70 C 0.07 A x 9 x 7 x 9 B -. x - 0. A x 9 x 9 x 7 x 9 B -. x - 0. A - x 7 - B -. x - 0. A - x 7 - B -. x A x 9 x 7. x 9 B A x 9 - x 9 B A - x 7. - DIMENSIONS in millimeters AND AVAILABLE FORMS Sleeve 0. ± ± 0.. ± 0. ± 0. 6 ± Ø D L 6 ± Fig. - Form A: Low profile Ø D (.) Laser weld Sleeve L - Solder plating (0.8).0 ± 0. Fig. - Form B: Vertical.0 ± 0..0 ± 0. DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE CASE MASS PACKAGING FORM Ø D Ø D x L (mm) CODE max. L max. (g) QUANTITIES. x B x 7 A x 9 A x 7. A x 9 A Note Packaging: bulk in box Revision: -Mar-8 Document Number: 86 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 ELECTRICAL DATA SYMBOL C R UCT R I DESCRIPTION Rated capacitance, tolerance -0 % / 80 %, measured by constant current discharge method Upper category temperature Max. leakage current after 0 min at U R Max. internal resistance at khz Note Unless otherwise specified, all electrical values in Table apply at T amb = 0 C, P = 86 kpa to 06 kpa and RH = % to 7 % 96 DLC ORDERING EXAMPLE Double layer capacitor 96 series.0 F /. V Nominal case size: Ø mm x 7. mm; Form A Ordering code: MAL 960E Former NC: 960 Table ELECTRICAL DATA AND ORDERING INFORMATION U R (V) C R (F) STANDARD SERIES NOMINAL CASE SIZE Ø D x L (mm) CASE CODE FORM UCT ( C) 0 min (μa) R I khz () ORDERING CODE 0.07 x 7 A MAL967E 0.0 x 7 A MAL960E. 0. x 7 A 70 7 MAL96E 0. x 7 A MAL96E 0.7 x 7. A MAL967E.0 x 7. A 70 0 MAL960E HIGH TEMPERATURE SERIES 0.07 x 9 A MAL967E 0.0 x 9 A MAL960E. 0.7 x 9 A MAL967E 0.68 x 9 A MAL9668E VERTICAL, MINIATURIZED SERIES x B MAL967E x B MAL960E 0.. x B 70 7 MAL96E 0.. x B MAL96E HIGH VOLTAGE SERIES x 9 A MAL967E 0.0 x 9 A MAL960E 0.7 x 9 A MAL967E 0.68 x 9 A MAL9668E Revision: -Mar-8 Document Number: 86 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 96 DLC MEASURING OF CHARACTERISTICS CAPACITANCE (C) Capacitance shall be measured by constant current discharge method. DISCHARGE CURRENT AS A FUNCTION OF RATED CAPACITANCE PARAMETER VALUE UNIT Rated F capacitance, C R Discharge 0..0 ma current, I D U (V) U R.0 INTERNAL RESISTANCE (R I ) AT khz R I Fig. - Test circuit for R I measurement LEAKAGE CURRENT ( ) Leakage current shall be measured after 0 min application of rated voltage U R : A V C V = khz VV = A ma V C V 0 0 min T (s) Time Fig. - Voltage diagram for capacitance measurement Capacitance value C R is given by discharge current I D, time T and rated voltage U R, according to the following equation: CF I D ma x 0 - x Ts = U R V - V C A Constant current discharger 0 (µa) 0 R S 00 Ω Fig. 6 - Test circuit for leakage current C Curve :.0 F,. V Curve : 0.7 F,. V Curve : 0. F,. V Curve : 0. F,. V R S = 00 Ω Fig. - Test circuit for capacitance measurement Time (h) Fig. 7 - Typical leakage current as a function of time Revision: -Mar-8 Document Number: 86 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 DISCHARGE CHARACTERISTICS Backup time of 96 DLC series capacitors depends on minimum memory holding voltage and discharge current (corresponding with the current consumption of the load). For minimum backup times of standard and vertical miniaturized series see Figures 8 and 9 (charging time h). 0 Backup time (s) 0 MGA69 96 DLC Figure 0 shows the backup time when a 96 DLC capacitor is discharged by a constant resistance (charging time h). The horizontal axis shows the initial value of discharge current if V is connected to the capacitor via a fixed series resistor. Example: μa corresponds to M and 0. μa corresponds to 0 M The vertical axis shows that period of time during which the voltage drops from V to V Discharge current (ma) Fig. 8 - Typical backup time as a function of discharge current 0 6 Backup time (s) 0 Curve :.0 F,. V Curve : 0.7 F,. V Curve : 0. F,. V Curve : 0. F,. V Voltage drop from.0 V to. V MGA Backup time (s) 0 0 Curve :.0 F,. V Curve : 0.7 F,. V Curve : 0. F,. V Curve : 0. F,. V Voltage drop from.0 V to.0 V by means of a fixed resistor Fig. 0 - Typical backup time as a function of initial discharge current MLB Initial value discharge current (μa) Curve :.0 F,. V Curve : 0.7 F,. V Curve : 0. F,. V Curve : 0. F,. V Voltage drop: from.0 V to.0 V Discharge current (ma) Fig. 9 - Typical backup time as a function of discharge current Revision: -Mar-8 Document Number: 86 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 96 DLC Table TEST PROCEDURES AND REQUIREMENTS for standard and vertical miniaturized series (. V; 70 C) NAME OF TEST Robustness of terminations IEC 608- / EN000 SUBCLAUSE. PROCEDURE (quick reference) Tensile strength; application of loading force for 0 s: 0 N (standard series) N (vertical miniaturized series) No breaks REQUIREMENTS Resistance to C/C: ± 0 %. Solder bath; 60 C; s soldering heat R I and spec. limit Solderability.6 Solder bath; C; s 7 % tinning Vibration.8 Damp heat, steady state. Endurance. Useful life - Storage at upper category temperature.7 Self discharge - Characteristics at high and low temperature.9 0 Hz to Hz;. mm; directions; h per direction 00 h at C; RH 90 % to 9 %; no voltage applied T amb = 70 C;. V applied; 000 h T amb = 70 C;. V applied; 000 h T amb = 70 C; no voltage applied; 000 h h storage at room temperature after application of V for h Step : reference measurement at 0 C of C, R I and Step : measurement at - C Step : measurement at 0 C Step : measurement at 70 C Step : measurement at 0 C C/C: ± 0 % R I and spec. limit C/C: ± 0 % R I x spec. limit x spec. limit C/C: ± 0 % R I x spec. limit x spec. limit C/C: ± 0 % R I x spec. limit x spec. limit C/C: ± 0 % R I x spec. limit x spec. limit Remaining voltage: V C/C: ± 0 % of 0 C value R I x the 0 C value x the 0 C value Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: -Mar-8 6 Document Number: 86 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 07 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000
Double Layer Capacitors
96 DLC Double Layer Capacitors Form A Fig. Component outline Form B FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationAluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
More informationAluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More informationAluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
More informationRuggedized Electrical Double Layer Energy Storage Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationElectrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationAluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationAluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationAluminum Capacitors Radial Miniature, High Voltage
152 RMH Aluminum Capacitors Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( x L in mm) 10 x 12 to 18 x 35 Rated capacitance range, C R 1.0 to 220 µf Tolerance on C R
More informationAluminum Capacitors Radial Very Low Impedance
6 RVI Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with RoHS COMPLIANT pressure relief, insulated with a blue vinyl
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationHybrid Energy Storage Capacitors
9 HVC ENYCAP Hybrid Energy Storage Capacitors EATURES Polarized energy storage capacitor with high capacity and energy density flexibility:. V (single cell) to.8 V /. V /. V / 7. V / 8. V (multiple cells)
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationAluminum Capacitors Power Long Life Snap-In
0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationStandard Carbon Film Leaded Resistors
Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable
More informationAluminum Capacitors Axial Miniature, Long-Life
8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
More informationRF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationHybrid Energy Storage Capacitors
Hybrid Energy Storage Capacitors 96 HVC ENYCAP Image is not to scale EATURES Polarized energy storage capacitor with high capacity and energy density Voltage flexibility:. V (single cell) to.8 V /. V /.6
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationAluminum Capacitors SMD (Chip) Standard. Table 1
085 CS Aluminum Capacitors Fig.1 Component outlines longer 085 CS 139 CLL life QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8.8 x 3.7 x 3.9 and 11.9 x 3.7 x 3.9 Rated capacitance
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES Small size High reliability Wide range of capacitance values APPLICATIONS Induction and dielectric heating Antenna units Filter, bypass,
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
T. 045090, T. 04520, T. 04550 RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES High reliability Multiple terminals Wide range of capacitance values APPLICATIONS Induction and dielectric
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationSmall Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationLead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors
Lead (Pb)-free Thick Film, Rectangular Commodity Chip Resistors FEATURES High volume product suitable for commercial applications Stability ( R/R 1 % for 1000 h at 70 C) Lead (Pb)-free solder contacts
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationAluminum Capacitors Radial Low Leakage Current
Aluminum apacitors Radial Low Leakage urrent 3 RL 3 RL standard leakage current ig. 36 RSP QUK REERENE DATA DESRPTON VALUE Nominal case sizes (Ø D x L in mm) 5 x and 8.2 x Rated capacitance range, R 2.2
More informationLead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors
Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes DESIGN SUPPORT TOOLS click logo to get started FEATURES Very sharp reverse characteristic Low reverse current level Available with tighter tolerances Very high stability Low noise
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Available Utilizes proven
More informationDirect Water Cooled Wirewound Resistor
Direct Water Cooled Wirewound Resistor FEATURES Direct cooling without heatsink Excellent power / volume ratio Multi resistive element option Material categorization: for definitions of compliance please
More informationPower Resistors for Mounting Onto a Heatsink Thick Film Technology
Power Resistors for Mounting Onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More information4-Line BUS-Port ESD-Protection
4-Line BUS-Port ESD-Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = Pin 1 marking XX = Date code YY = Type code (see table below) 2453 1 XX YY 211 FEATURES Ultra compact LLP75-6L package 4-line
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationCeramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationFEATURES. Note 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 C
Wet Tantalum Capacitors Silver Case TANTALEX Capacitors Hermetically-Sealed FEURES Terminations: axial, standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Model is the commercial
More informationSolid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved
Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (types CTS13) -55 C to +125 C (types CTS1, 749DX)
More informationGreen Commodity Thick Film Chip Resistors
Green Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Green resistor - does not use exemptions Material categorization: for definitions of compliance
More informationConformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks
Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationGreen Thick Film Chip Resistors
Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More informationSilicon PIN Photodiode, RoHS Compliant
Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC
More informationCemented Leaded Wirewound Precision Resistors
Cemented eaded Wirewound Precision Resistors FEATURES High power dissipation in small volume Ideal for pulse application TCR ± 100 ppm/k Maximum permissible hot spot temperature is 275 C ead (Pb)-free
More informationSingle Phase Fast Recovery Bridge (Power Modules), 61 A
VS-SA6BA60 Single Phase Fast Recovery Bridge (Power Modules), 6 A SOT-227 PRIMARY CHARACTERISTICS V RRM 600 V I O 6 A t rr 70 ns Type Modules - Bridge, Fast Package SOT-227 Circuit configuration Single
More informationWet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX
Wet Tantalum Capacitors Silver Case with Glass-to-Metal Hermetic Seal, TANTALEX PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (+125 C with voltage derating) Capacitance Range: 738D
More informationTwo-Line ESD Protection in SOT-23
Two-Line ESD Protection in 2 3 20456 MARKING (example only) YYY = type code (see table below) XX = date code 1 XX YYY XX 20512 20357 1 FEATURES Two-line ESD-protection device ESD-protection acc. IEC 61000-4-2
More informationV30100S-E3, VF30100S-E3, VB30100S-E3, VI30100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V3000S-E3, VF3000S-E3, VB3000S-E3, VI3000S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.39 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low
More informationV20100S-E3, VF20100S-E3, VB20100S-E3, VI20100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V200S-E3, VF200S-E3, VB200S-E3, VI200S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.446 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low forward
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More information