SPECIFICATION CUSTOMER : SHEET NO. DATE MODEL NAME DR2-102K-B & T DR 6.5X7.5mm PART NAME. Radial Inductor PART NO.
|
|
- Amberly Watson
- 5 years ago
- Views:
Transcription
1 PART NAME Radial Inductor PART NO. DR)mH(0K) SHEET NO. DATE MODEL NAME DESCRIPTION OF DR-0K-B & T DR 6.5X7.5mm. GENERAL ) SCOPE This specfication applies to part number mh PEAKING COIL for use in electronic appliances which is supplied for. MECHANICAL CHARACTERISTIC PEAKING COIL shall conform in size, dimension, and other mechanical properties, to the part drawing attached here to. ) Marking PEAKING COIL shall be permanently and legibly marked with the part number on the specification position. ) Terminal strength Terminal shall withstand for 0 seconds without breakdown on losing when a static load of Kg is applied in the drawing direction to the terminal at the point where the external load.. ENVIRONMENTAL & LIFECHARACTERISTIC ) Temperature rise Temperature rise of the each winding and core shall be less than ambient + 65, when the PEAKING COIL continuously operated at full load(test load) until constant temperature is attained. ) Heat-resistance Immediately after PEAKING COIL being placed in room for 96 Hours maintained AT 05 ± ambient temperature, the PEAKING COIL shall conform with the above part paragraph () and also insulation resistance shall be more than 00 MΩ. ) Moisture resistance Immediately after PEAKING COIL being placed in room for 0 Hours in such humidity chamber this is maintained at 90-95% relative humidity and 55 ± temperature and wipped a drop of water, PEAKING COIL shall conform with the above paragraph() and also insulation shall be the 0 MΩ. ) Safety consideration PEAKING COIL shall meet all the requirements subject to IEC-950 standards for safety of information technology equipment including electrical business equipment. 5) Solderabilitly Dip pads in RMA flux, 96.5/0.5/ solder (Sn/Cu/Ag)at 60 for 5± seconds
2 SHEET NO. OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm. APPEARANCE & DIMENSION (UNIT:m/m) <Bulk type> EPOXY COLOR GREEN MARKING :0 or 0K <TOP VIEW> MAX.0MAX.5 MAX.5REF 0.5 REF 0.0 MIN
3 SHEET NO. OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm. APPEARANCE & DIMENSION (UNIT:m/m) <Taping type> EPOXY COLOR GREEN <TOP VIEW> MARKING :0 or 0K MAX 0± 7.8 MAX 5.0 MAX 6.0±.0.7± ,-0..0±0.
4 SHEET NO. OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm 5. WINDING SPEC TYPE OF WIRE TURNS WINDING METHODE START & FINISH UEW 0.6Ф 85.5 Ts REF SOLENOID WINDING [C. C. W] 6. ELECTRICAL CHARACTERISTIC NO ITEM MESURE REMARKS INDUCTANCE START & FINISH [mh] ± 0% HIOKI5 LCR METER at khz V DC RESISTANCE START & FINISH.0[Ω] MAX WHEATSTONE BRIDGE TYPE 755 DIELECTRIC WITHSTANDING TEST COIL & CORE AC [KV], FREQUANCY 60 [Hz], MINUTES, CUT OFF CURENT [ma] KIKUSUI TOS50
5 SHEET NO. 5 OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm 7. SCHEMATIC DIAGRAM ()CORE ()EPOXY RESIN ()COIL (5)EPOXY ()LEAD WIRE 8. MATERIAL LIST NO ITEM MATERIAL & DIMENSION MANUFACTURE JA CORE JIACI(ZHUHAI)ELECTRONICS CO.,LTD. DR 6.5X7.5mm REMARK WIRE UEW 0.6Ф CNI CABLE CO., LTD. CHUNYI ELECTRICAL APPLLANCES CO.,LTD. E098 E980 EPOXY RESIN EPI-CHEM 90HF SAMSIN CHEMICAL CO.,LTD. E0 LEAD WIRE TPC 0.6Ф 5 EPOXY - SOLDER BAR EPI CHEM-00HS FK66 HSE-09 SC00 KISTRON CO.,LTD YEHUA CO.,LTD SAMSIN CHEMICAL CO.,LTD. QIFU ELECTRONIC MATERIALS FACTORY HEESUNG MATERIAL LTD. HANHUA TIN CO.,LTD. - FLUX F8 ZHUHAI FRIEND INDUSTRIAL CO.,LTD. - INK 99BK HC-659 DOMINO KOREA CO.,LTD. CANTON XING CHUANG CODING EQUIPMENT CO.,LTD. 9. TABLE OF STANDARD CHARACTERISTICS OF MATERIALS PROPETY UNIT μiac Bms Br WORKING Tc MATERIAL ±5% GAUSS GAUSS Frequency(MHZ) JA ~.0 50
6 SHEET NO. 6 OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm 0. REMARK- / DONG YANG [UL CARD]
7 SHEET NO. 7 OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm 0. REMARK- / CHUNYI [UL CARD]
8 SHEET NO. 8 OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm 0. REMARK- / SAMSIN [UL CARD]
9 SHEET NO. 9 OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm. PACKING ITEM INNER BOX(PCS) OUT BOX(PCS) DR-0K-T,500 7,500 INNER BOX : 0L*55W*50H(PUT 500EA IN ONE INNER BOX) ITEM NO : DR)mH CODE NO : DR-0KT Q, TY :,500PCS LOT NO : NS-F709 OUT BOX : 60L*65W*85H(PUT IN FIVE INNER BOX) LABEL
10 SHEET NO. 0 OF 0 DATE PART NAME Radial Inductor MODEL NAME DR-0K-B & T PART NO. DR)mH(0K) DESCRIPTION DR 6.5X7.5mm. INSPECTION DATA NO INDUCTANCE DC RESISTANCE 내전압절연저항 SPEC [mh] ± 0%.0[Ω] MAX AC KV 분 MIN DC 500V 00 MΩ MIN.0. OK OK.0. OK OK.0. OK OK.0. OK OK 5.0. OK OK 6.0. OK OK 7.0. OK OK 8.0. OK OK OK OK 0.0. OK OK X.07. MIN.00. MAX.0. REMARK
SPECIFICATION APPLICATION FOR APPROVAL OF
NO : 080- APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 0 X mm DRB) uh(0k),bulk This space is used for customer's approval DATE : 0.08.0. DRAWN BY E. Y. LEE CHECKED
More informationSPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval CUSTOMER : NO :
NO :00- APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 8 x mm DRA).mH(BULK) This space is used for customer's approval DATE : 0.0.0. DRAWN BY E. Y. LEE CHECKED
More informationSPECIFICATION APPLICATION FOR APPROVAL OF
NO : 0807- APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 8 x 8mm DR) 00uH(BULK & TAPPING) This space is used for customer's approval DATE : 008. 07.. DRAWN BY
More informationSPECIFICATION NAMSUN ELECTRONICS CO.,LTD APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
NO : 080-0 APPLICATION FOR APPROVAL OF ITEM DESCRIPTION CODE NO MODEL NO : : : : RADIAL INDUCTOR DR 6.5 X 7.5mm DR)uH (Bulk TAPPING) This space is used for customer's approval DATE : 0.0.07. DRAWN BY Y.H.JEON
More informationSPECIFICATION BO SUNG ELECTRONICS CO., LTD. APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
USTME : : 08050 SPECIFICATIN APPLICATIN F APPVAL F ITEM DESCIPTIN CDE MDEL : : : : AXIAL INDUCT (0)TYPE This space is used for customer's approval : 008.05.0. DAWN BY Y. H. JEN CHECKED BY 008. 05. 0..
More informationSPECIFICATION BOSUNG ELECTRONICS CO., LTD. APPLICATION FOR APPROVAL OF. This space is used for customer's approval DATE :
: 070600 APPLICATIN F APPVAL F ITEM CDE MDEL : : : : AXIAL INDUCT (0)TYPE This space is used for customer's approval : 008. 05. 0. DAWN BY Y. H. JEN CHECKED BY 008. 05. 0.. APPVED BY J. G. KIM 008. 05.
More informationSPECIFICATIONS. CUSTOMER ITEM MODEL NAME PART No DATE 승 인 정식승인 ( ) 한도승인 ( )
승 인 정식승인 ( ) 한도승인 ( ) SPECIFICATIONS ITEM MODEL NAME PART No LINE FILTER NSH-103 UU101-10mH (H-TYPE) 검토심사승인 승인유효기간승인일로부터년 신청회사명 주 소 TEL 0-689-918 FAX 0-689-868 개정이력 MODEL NO NSH-103 PART NO UU101-10mH
More informationS P E C I F I C A T I O N S
TO : 2009-09-14 S P E C I F I C A T I O N S PRODUCT : CERAMIC CAPACITOR MODEL : DA (X1,Y1) SERIES Manufacturer Customer WRITTEN CHECKED APPROVED WRITTEN CHECKED APPROVED 9/14 9/14 9/14 / / / DONG IL ELECTRONICS
More informationSPECIFICATIONS. CUSTOMER ITEM MODEL NAME PART No DATE 승 인 정식승인 ( ) 한도승인 ( )
승 인 정식승인 ( ) 한도승인 ( ) SPECIFICATIONS ITEM MODEL NAME PART No LINE FILTER NSH-101 UU101-20mH (H-TYPE) DATE 2015-5-6 검토심사승인 승인유효기간승인일로부터년 신청회사명 주 소 TEL 02-2689-918 FAX 02-2689-8628 개정이력 MODEL NO NSH-101
More information1/10 FEATURES HOW TO ORDER DIMENSIONS
OUTLINE Wire wound chip inductor is a perfect combine by means of combining high precision coil framework with superb wound technology.comparable with traditional inductor, it is improved technology, reduced
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationMagnetic Sealing SMD Inductor
1. Scope This Specification is applied to the Pb free high current type SMD inductor for ZLRH1270CXXXXT. 2. Part Number Code ZLRH 1270 C 330 M T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationTITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS S-01
Specification TITLE STATUS SPEC. NO. DATE PAGE NO. 3.5Φ EARPHONE JACK 4 POLEs / 2 SWITCH GENERAL SMT TYPE BS123-000S-01 1 OF 4 1999/09/30 1. GENERAL SCOPE THIS SPECIFICATION COVERs THE GENERAL REQUIREMENTs
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationSMD Shielded Power Inductor. TIS8D43GS Series. Features. Applications. Dimensions
SMD Shielded Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter of portable equipment Camcorder, LCD television
More informationCapacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors
Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationAD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationDATA SHEET. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China
DATA SHEET Product Name Carbon Film Fixed Resistors Part Name CFR/CPR Series Uniroyal Electronics Global Co., Ltd. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China Tel +86
More informationNTC Thermistor:TTC05 Series
NTC Thermistor:TTC05 Series Ф5 mm Lead Type for Temperature Sensing/Compensation Features. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating
More informationProsperity Dielectrics Co., Ltd. PDC. No.148, Chang-An Rd., Sec.1, Lu-Tsu Shiang, Taoyuan, Taiwan FPFL-Rev.7.
High-Power Low Lead Free Chip Resistors 1. SCOPE..2 Purpose..2 Configuration.... 2 Part Number.....2 2. PERFORMANCE CHARACTERISTICS....3 2.1 Power Derating Curve by Ambient Temperature....3 2.2 Mechanical
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationPECIFICATIONS Model TC03 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric.
PECIFICATIONS Model TC3 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric. 2. Main characteristics Table 1 Part No. TC3Z5H169B TC3Z1H169B TC3R1H169B
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationFusible Resistors Ambient Temperature ( )
Fusible Resistors RATING: C.1 Rated power is the value of max. load voltage specified at the ambient temperature of 70. When the ambient temperature surpasses the above mentioned temperature, the value
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationProduct Series Specification Document
Product Series 3.96mm pitch board-to-board connectors - Socket SCOPE This document covers 3.96mm socket connectors. The connector will perform to the specifications outlined. All tests have been performed
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More informationAPPLICATIONS Wireless communication equipment and various types of general electronic equipment; Other electronic equipment including HDDs and ODDs.
WIRE WOUND CHIP FERRITE INDUCTORS FEATURES ature size, suitable for SMT; Using terminal electrode structure to restrain the parasitic component effect quite caused by lead; low DC resistance, high current
More informationMetal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationNTC Thermistor:TCF Type
Features 1. RoHS compliant 2. Body size ψ3mm 3. Radial lead resin coated 4. -40 ~ +100 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL /cul Recommended
More information± 250 ppm / ± 150 ppm / max. working voltage 150 V 200 V 250 V 400 V 700 V
FEATURES High power dissipation in small volume High pulse load handling capabilities. APPLICATIONS Ballast switching Shunt in small electric motors Power supplies. DESCRIPTION The resistor element is
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationSPECIFICATION FOR APPROVAL
PAGE: 1 CONFIGURATION & DIMENSIONS Marking A 100 A : 1. ±0. B : 1. ±0. BC :. ±0. D :.0 ±0. E :.0 typ. F : 6.8 ref. G :.4 ref. C H :.9 ref. D G H E F H SCHEMATIC DIAGRAM (PCB Pattern) MATERIALS a Core Ferrite
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More informationSMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
More informationSPECIFICATION SAMWHA CAPACITOR CO.,LTD PT SAMCON JL. RAYA SUBANG CIKUMPAY CAMPAKA-PURWAKARTA JAWA BARAT - INDONESIA
SPECIFICATION SAMWHA CAPACITOR CO.,LTD PT SAMCON JL. RAYA SUBANG CIKUMPAY CAMPAKA-PURWAKARTA JAWA BARAT - INDONESIA To. 삼한파츠 No. SWC-20170404 20170404-02 02 SPECIFICATION ITEM : DISC CERAMIC CAPACITOR
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationSnubber MMKP 386 AC and pulse double metallized film capacitor
Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationWF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationPRODUCT: MULTILAYER CERAMIC CAPACITOR
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 12 Page: 1 / 18 PRODUCT: MULTILAYER CERAMIC CAPACITOR TYPE: RADIAL-LEADED TYPE CAPACITOR CUSTOMER: DOC. NO.: D13-00-E-12 Ver.: 12 APPROVED
More informationReference Only Spec. No. JEFL243B 0003F-01 P 1/ 6
Spec. No. JEFL243B 0003F-01 P 1/ 6 DC Common Mode Choke Coil PLT09HN2003R0P1B Reference Specification 1. Scope This reference specification applies to DC Common Mode Choke Coil (PLT09H Series). 2. Part
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More informationApproval Sheet. for. Carbon Film Resistors. CFR series YAGEO CORPORATION
Approval Sheet for Carbon Film Resistors CFR series ±2% & ±5% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Shin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-4286 URL:
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationPREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationAXIAL LEADED INDUCTORS
AXIAL LEADED INDUCTORS ISO-900 Registered OPERATING TEMP -5~+5 C (Including self-generated heat) FEATURES Extremely reliable inductors that are ideal for automatic insertion Highly efficient automated
More informationSPECIFICATION SS 51/9 400KV COUPLING CAPACITORS FOR POWER LINE CARRIER SYSTEM
INDEPENDENT POWER TRANSMISSION OPERATOR S.A. TNPRD/ SUBSTATION SPECIFICATION & EQUIPMENT SECTION January 2017 SPECIFICATION SS 51/9 400KV COUPLING CAPACITORS FOR POWER LINE CARRIER SYSTEM I. SCOPE This
More informationNTC Thermistor:TTS Series
Features. RoHS compliant. Halogen-Free (HF) series are available. Body size: Ф.8mm, Ф.mm. Radial lead resin coated. Long leads for easy sensor placement. Operating temperature range: -0 ~ +00. Wide resistance
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R
Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationSPECIFICATION. WRITTEN by 06/28. DONG IL ELECTRONICS CO., LTD. ( Head Offics & Manufacture : Korea )
Messrs: Ropla Issued date : 2017.06.28 Part Description : Type DS (Safety standard Recognized Ceramic Capacitor) Customer Part No DONG IL Part No - DS Series DONG IL CUSTOMER WRITTEN by CHECKED by APPROVED
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More information100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationNTC Thermistor:TTF Type
Features 1. RoHS compliant 2. Radial leaded insulation film coated 3. -40 ~ +100 operating temperature range 4. Agency recognition: UL /cul Recommended Applications 1. Home appliances (air conditioner,
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationYEAR DATE: DAY MONTH. TDK Corporation Sales. Engineering. Marketing Group. Business Group. Magnetics APPROVED CHECKED.
SPECIFICATION SPEC. No.C425NAA00007-1 DATE Sep. 9. 2015 To Xiamen Holder Electronics Co.,Ltd. CUSTOMER S PRODUCT NAME TDK S PRODUCT NAME THIN FILM INDUCTOR TFM252010ALM-MTAA Series RECEIPT CONFIRMATION
More informationSafety SPECIFICATION SAMWHA CAPACITOR CO.,LTD PT SAMCON JL. RAYA SUBANG CIKUMPAY CAMPAKA-PURWAKARTA JAWA BARAT - INDONESIA
Safety SPECIFICATION SAMWHA CAPACITOR CO.,LTD PT SAMCON JL. RAYA SUBANG CIKUMPAY CAMPAKA-PURWAKARTA JAWA BARAT - INDONESIA To. 삼한파츠 No.SWC-20170404 20170404-01 SPECIFICATION ITEM : DISC CERAMIC CAPACITOR
More informationPRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 3000K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 1.0.
CUSTOMER :. DATE : 213. 3. 29. REV : Rev. 1.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 3K MODEL NAME : LLDMWW-15K21A (Type II Lens - H:16 V:7 ) LLDMWW-15K22A (Type III Lens - H:135 V:6 ) LLDMWW-15K23A
More informationNTC Thermistor:TTC03 Series
Features 1. RoHS compliant 2. Body size Ф3mm 3. Radial lead resin coated 4. -40 ~ +125 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL /CQC Recommended
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationSpezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano
1 Scope This Specification covers the construction and characteristics of 0,5mm Pitch FFC and FPC (Flat Flexible Cable and Flat PCB Cable ) of Z56-xx ZIF Connector Series. The part shall satisfy the following
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.2.6 No.RC-K-HTS-0001-13 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) Style: RC1/4,1/2 RoHS COMPLIANCE ITEM Product specification contained in this specification are
More informationDATA SHEET. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China
DATA SHEET Product Name Complete Pb-Free Thick Film Chip Resistors Part Name PF Series Uniroyal Electronics Global Co., Ltd. 88 Longteng Road, Economic & Technical Development Zone, Kunshan, Jiangsu, China
More informationSPECIFICATION FOR APPROVAL
REF : PAGE : 1 Ⅰ. CONFIGURATION & DIMENSIONS: 1 2 Marking white color A 4 B 3 C A : 9.00±0.3 m/m B : 5.40±0.2 m/m C : 3.60±0.2 m/m E : 2.50 typ. F : 1.00 typ. J : 9.50 ref. K : 3.70 ref. m/m m/m m/m m/m
More informationEMI Suppression PCRC 420 film capacitors (RC unit)
MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
More informationPRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 5700K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 2.0.
CUSTOMER :. DATE : 213. 4. 23. REV : Rev. 2.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 57K MODEL NAME : LLDMWW-15K71A (Type II Lens - H:16 V:7 ) LLDMWW-15K72A (Type III Lens - H:135 V:6 ) LLDMWW-15K73A
More informationDDR4 SODIMM Socket 0.5mm Pitch 260Pos
1. Introduction 1.1 Testing was performed on DDR4 SODIMM SOCKET 260P to determine if it meets the requirement of Product Specification, 108-115122 Rev.A. 1.2 Scope This report covers the electrical, mechanical
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationMULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
More information