Aluminum Capacitors Radial Low Leakage Current
|
|
- Audra Hubbard
- 5 years ago
- Views:
Transcription
1 Aluminum apacitors Radial Low Leakage urrent 3 RL 3 RL standard leakage current ig. 36 RSP QUK REERENE DATA DESRPTON VALUE Nominal case sizes (Ø D x L in mm) 5 x and 8.2 x Rated capacitance range, R 2.2 μ to 47 μ Tolerance on R ± 2 %; ± % on request Rated voltage range, U R 6.3 V to 5 V ategory temperature range - 4 to + 85 Leakage current after 2 min: U R = 6.3 V to 25 V.2 R x U R or.7 μa, whichever is greater U R = 35 V and 5 V.2 R x U R + μa Endurance test at 85 2 h Useful life at 5 75 h Useful life at 85 3 h Useful life at 4,.4 x R applied 8 h Shelf life at V, 85 5 h Based on sectional specification E /EN 33 limatic category E 668 4/85/56 EATURES Useful life at + 85 : 3 h Low leakage current, low energy consumption Miniaturized, high V-product per unit volume Natural pitch 2.5 mm and 5 mm Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, all-insulated (light blue) harge and discharge proof Material categorization: or definitions of compliance please see APPLATONS Telecommunication, automotive, audio-video, EDP and industrial oupling, decoupling, buffering, timing, energy storage Portable and mobile equipment Low surface demand on printed-circuit board MARKNG The capacitors are marked (where possible) with the following information: Rated capacitance (in μ) Tolerance on rated capacitance, code letter in accordance with E 662 (M for ± 2 %) Rated voltage (in V) Date code in accordance with E 662 ode indicating factory of origin Name of manufacturer - -sign on top to identify the negative terminal Series number (3) SELETON HART OR R, U R, AND RELEVANT NOMNAL ASE SZES (Ø D x L in mm) R (μ) U R (V) x - 5 x x - 5 x x - 5 x x - 5 x x - 5 x x - 5 x 8.2 x 47-5 x 5 x 8.2 x x 68-5 x x - 5 x x x x x Revision: 26-Apr-3 Document Number: 2833 or technical questions, contact: aluminumcaps@vishay.com
2 3 RL DMENSONS in millimeters AND AVALABLE S Ø D Ø D L 5 min. 4 + Ø d Ø d 5 min. 5 ±.5 ig. 2 - orm A: Long leads ig. 3 - orm B: ut leads ase Ø D x L = 5 mm x mm and 8.2 mm x mm Pitch = 5 mm ase Ø D x L = 5 mm x mm only Pitch = 2.5 mm ig. 4 - orm TA: Taped in box (ammopack) ig. 5 - orm TNA: Taped in box (ammopack) DMENSONS in millimeters, MASS AND PAKAGNG QUANTTES NOMNAL ASE SZE Ø D x L ASE ODE Ø d Ø D max. L max. MASS (g) PAKAGNG QUANTTES A, B TA, TNA 5 x ± x ±.5. Note or detailed tape dimensions, please see Revision: 26-Apr-3 2 Document Number: 2833 or technical questions, contact: aluminumcaps@vishay.com
3 ELETRAL DATA SYMBOL DESRPTON R Rated capacitance at Hz, tolerance ± 2 % R Rated RMS ripple current at Hz, 85 L2 Max. leakage current after 2 min at U R tan Max. dissipation factor at Hz Z Max. impedance at khz and + 2 Note Unless otherwise specified, all electrical values in Table apply at T amb = 2, P = 86 kpa to 6 kpa, RH = 45 % to 75 %. 3 RL ORDERNG EXAMPLE Electrolytic capacitor 3 series μ/6 V; ± 2 % Nominal case size: Ø 8.2 mm x mm; orm TA Ordering ode: MAL2335E3 ormer 2N: Table ELETRAL DATA AND ORDERNG NATON U R (V) R Hz (μ) NOMNAL ASE SZE Ø D x L R Hz 85 (ma) L2 2 min (μa) tan Hz Z khz ( ) ORDERNG ODE MAL23... BULK PAKAGNG TAPED AMMOPAK LONG LEADS UT LEADS A B TA TNA x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E3 5. 6E3 5. 3E x E E E x E E E x E E E x E E E x E E E x E E E x E E E x E E E Revision: 26-Apr-3 3 Document Number: 2833 or technical questions, contact: aluminumcaps@vishay.com
4 3 RL ADDTONAL ELETRAL DATA PARAMETER ONDTONS VALUE Voltage Surge voltage U s.3 x U R Reverse voltage U rev V urrent Leakage current After 2 min at U R : U R = 6.3 V to 25 V L2.2 R x U R or.7 μa, whichever is greater U R = 35 V and 5 V L2.2 R x U R + μa nductance Equivalent series inductance (ESL) ase Ø D x L = 5 mm x mm Typ. 3 nh ase Ø D x L = 8.2 mm x mm Typ. 6 nh Resistance Equivalent series resistance (ESR) alculated from tan max. and R (see Table ) ESR = tan /2 f R APATANE () = apacitance at 2, Hz ig. 6 - Typical multiplier of capacitance as a function of ambient temperature LEAKAGE URRENT urve : 25 V and 5 V, 2.2 µ urve 2: 25 V and 5 V, 3.3 µ to 6.8 µ urve 3: 25 V and 5 V, µ to 68 µ urve 4: 6.3 V, V, 6 V, 35 V urve : 25 V and 5 V, 2.2 µ urve 2: 25 V and 5 V, 3.3 µ to 6.8 µ urve 3: 25 V and 5 V, µ and 5 µ 5 urve 4: 25 V and 5 V, 22 µ to 68 µ urve 5: 6 V and 35 V.7 urve 6: 6.3 V and V f (Hz) 5 = apacitance at 2, Hz. ig. 7 - Typical multiplier of capacitance as a function of frequency = Leakage current during continuous operation at 2 and U R ig. 8 - Typical multiplier of leakage current as a function of ambient temperature U. U R = Leakage current during continuous operation at 2 and U R ig. 9 - Typical multiplier of leakage current as a function of time Revision: 26-Apr-3 4 Document Number: 2833 or technical questions, contact: aluminumcaps@vishay.com
5 RL LEAKAGE URRENT - = Leakage current ig. - Typical multiplier of leakage current as a function of time t (s) RPPLE URRENT AND USEUL LE A R Lifetime multiplier A = Actual ripple current at Hz R = Ripple current at 85, Hz () Useful life at 85 and R ripple current load ig. - Multiplier of useful life as a function of ambient temperature and ripple current load ( ) Table 2 MULTPLER O RPPLE URRENT ( R ) AS A UNTON O REQUENY REQUENY R MULTPLER (Hz) U R = 6.3 V U R = V, 6 V and 35 V U R = 25 V and 5 V Revision: 26-Apr-3 5 Document Number: 2833 or technical questions, contact: aluminumcaps@vishay.com
6 3 RL Table 3 TEST PROEDURES AND REQUREMENTS TEST NAME O TEST REERENE PROEDURE REQUREMENTS Endurance E / EN33, subclause 4.3 T amb = 85 ; U R applied; 2 h U R 6.3 V; /: + 5 %/- 3 % U R > 6.3 V; /: ± 5 % tan.3 x spec. limit Z 2 x spec. limit L2 spec. limit Useful life E 33, subclause.8. T amb = 85 ; U R and R applied; 3 h U R 6.3 V; /: + 45 %/- 5 % U R > 6.3 V; /: ± 45 % tan 3 x spec. limit Z 3 x spec. limit L2 spec. limit no short or open circuit total failure percentage: % Shelf life (storage at high temperature) E / EN33, subclause 4.7 T amb = 85 ; no voltage applied; 5 h After test: U R to be applied for 3 min, 24 h to 48 h before measurement /, tan, Z: or requirements see Endurance test above L2 2 x spec. limit Revision: 26-Apr-3 6 Document Number: 2833 or technical questions, contact: aluminumcaps@vishay.com
7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUT, PRODUT SPEATONS AND DATA ARE SUBJET TO HANGE WTHOUT NOTE TO MPROVE RELABLTY, UNTON OR DESGN OR OTHERWSE. Vishay ntertechnology, nc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. t is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material ategory Policy Vishay ntertechnology, nc. hereby certifies that all its products that are identified as RoHS-ompliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the ouncil of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/E. We confirm that all the products identified as being compliant to Directive 22/95/E conform to Directive 2/65/EU. Vishay ntertechnology, nc. hereby certifies that all its products that are identified as Halogen-ree follow Halogen-ree requirements as per JEDE JS79A standards. Please note that some Vishay documentation may still make reference to the E definition. We confirm that all the products identified as being compliant to E conform to JEDE JS79A standards. Revision: 2-Oct-2 Document Number: 9
Aluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
More informationAluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
More informationAluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationAluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More informationAluminum Capacitors Radial Very Low Impedance
6 RVI Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with RoHS COMPLIANT pressure relief, insulated with a blue vinyl
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationAluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationAluminum Capacitors Radial Miniature, High Voltage
152 RMH Aluminum Capacitors Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( x L in mm) 10 x 12 to 18 x 35 Rated capacitance range, C R 1.0 to 220 µf Tolerance on C R
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationAluminum Capacitors Axial Miniature, Long-Life
8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More informationAluminum Capacitors Power Long Life Snap-In
0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationAluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationEnergy Storage Double Layer Capacitors
96 DLC Energy Storage Double Layer Capacitors FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double layer Radial leads,
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationAluminum Capacitors SMD (Chip) Standard. Table 1
085 CS Aluminum Capacitors Fig.1 Component outlines longer 085 CS 139 CLL life QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8.8 x 3.7 x 3.9 and 11.9 x 3.7 x 3.9 Rated capacitance
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationElectrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage
Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationDouble Layer Capacitors
96 DLC Double Layer Capacitors Form A Fig. Component outline Form B FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double
More informationRuggedized Electrical Double Layer Energy Storage Capacitors
Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version
More informationConformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks
Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition
More informationZener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box
Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise TZMC-
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationThrough Hole Transformers, Pulse, Trigger Type
Through Hole Transformers, Pulse, Trigger Type STANDARD ELECTRICAL SPECIFICATIONS PRIMARY IND. MIN. (mh) PRIMARY DCR MAX. ( ) Notes () Hipot voltage will meet international safety standards () Low profile
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationHyperfast Rectifier, 1 A FRED Pt
Hyperfast Rectifier, 1 A FRED Pt SMF (DO-219AB) Cathode Anode FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 17 C maximum operating junction temperature Low forward voltage drop Low
More informationAluminum Capacitors + 85 C, Miniature, General Purpose
500D Aluminum Capacitors Fig.1 Component outline FEATURES Increased CV efficiency New 0.709" [18.0 mm] diameter case size Axial lead QUICK REFERENCE DATA DESCRIPTION Nominal case size Ø in mm VALUE 0.248"
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes
More informationSolid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
More informationAluminum Capacitors C, Miniature, Radial Lead
FEATURES Original SMPS output capacitors Minimal ESR change High ripple current capability Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION Nominal case size Ø D x L in mm VALUE 0.394" x 0.472"
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationHigh Brightness LED Power Module
High Brightness LED Power Module Vishay Semiconductors 22139 22140 DESCRIPTION The VLSL41xxA are metal core based high brightness LED power modules, assembled with 12, 24 or 3 HB white LEDs. The color
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise AEC-Q qualified Compliant to RoHS Directive 22/95/EC and in accordance to WEEE
More informationHigh Brightness LED Power Module
High Brightness LED Power Module 22139 22438 DESCRIPTION VLPC0303A2, and VLPW0303A2 are metal core based high brightness LED power modules assembled with 9 HB white LEDs. VLPC0303A2 is a cool white version
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationHybrid Energy Storage Capacitors
Hybrid Energy Storage Capacitors 96 HVC ENYCAP Image is not to scale EATURES Polarized energy storage capacitor with high capacity and energy density Voltage flexibility:. V (single cell) to.8 V /. V /.6
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationTELUX LED FEATURES APPLICATIONS COORDINATE. FORWARD VOLTAGE (V) (ma) at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 0.33, 0.
TELUX LED DESCRIPTION The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationHigh Brightness LED Power Module
High Brightness LED Power Module VLSL3112A2, VLSL3124A2 Vishay Semiconductors 22454 22139 DESCRIPTION The VLSL3112A2, VLSL3124A2 are metal core based high brightness LED power modules, assembled with 12
More informationCemented Wirewound Resistors
Cemented Wirewound Resistors STANDARD EECTRICA SPECIFICATIONS MODE POWER RATING P 40 C W POWER RATING P 70 C W IMITING VOTAGE U max. Notes () Resistance value to be selected for ± 5 % from E24 (2) AC03
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationDATA SHEET. 048 RML Aluminum electrolytic capacitors Radial Miniature Long-Life. BCcomponents
DATA SHEET Supersedes data of January 998 File under, BC0 000 Jan 8 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with pressure relief,
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationSmall Signal Zener Diodes, Dual
DZ-V-G Series Small Signal Zener Diodes, Dual PRIMERY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current FEATURES Dual silicon planar Zener diodes, common
More informationCeramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationSPECIFICATIONS (T J = 25 C, unless otherwise noted)
N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) () I D (A) a, e Q g (Typ.). at V GS = V. at V GS = 4.5 V nc DFN 3x3 EP Top View Bottom View FEATURES APPLICATIONS Top View D 3 4 8 7 6 5 G Pin
More informationRF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationHigh Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
More informationSmall Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationHybrid Energy Storage Capacitors
9 HVC ENYCAP Hybrid Energy Storage Capacitors EATURES Polarized energy storage capacitor with high capacity and energy density flexibility:. V (single cell) to.8 V /. V /. V / 7. V / 8. V (multiple cells)
More informationSolid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved
Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (types CTS13) -55 C to +125 C (types CTS1, 749DX)
More informationZener Diodes FEATURES APPLICATIONS
Zener Diodes SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 00 V Test current I ZT.7 to 80 ma V BR 5. to 95 V V WM 4.7 to 90 V P PPM 40 W T J max. 50 C V Z specification
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES Small size High reliability Wide range of capacitance values APPLICATIONS Induction and dielectric heating Antenna units Filter, bypass,
More informationLead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationRF Power Pot Capacitors with Mounting Tags, Class 1 Ceramic
T. 045090, T. 04520, T. 04550 RF Power Pot Capacitors with Mounting Tags, Class Ceramic FEATURES High reliability Multiple terminals Wide range of capacitance values APPLICATIONS Induction and dielectric
More informationDC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 7.62 mm lead pitch. Supplied loose in box and taped on reel or ammopack AEC-Q200 qualified Material categorization: For definitions of compliance please
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationThick Film Chip Resistors, Military/Established Reliability MIL-PRF Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced
More informationSilicon PIN Photodiode, RoHS Compliant
Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
VP0 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.43 V at I F = 5 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode FEATURES Very low profile - typical height
More informationDC Film Capacitors MKT Axial Type
MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant
More informationAxial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Utilizes proven SuperTan
More informationWet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Available Utilizes proven
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
More informationSolid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More information