Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability

Transcription

1 Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, lead (Pb)-free reflow solderable Very low impedance, very high ripple current Charge and discharge proof, no peak current limitation 40 CRH 25 C lower Z 46 CTI Parts for advanced high temperature reflow soldering according to JEDEC J-STD-020 Vibration proof, 6-pin version up to 30 g 53 CRV lower Z high temperature 50 CRZ Fig. high vibration AEC-Q200 qualified High reliability Low ESR Material categorization: for definitions of compliance please see QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 6 x 6 x 6 to 8 x 8 x 2 Rated capacitance range, C R 220 μf to μf Tolerance on C R ± 20 % Rated voltage range, U R 6.3 V to 00 V Category temperature range 6.3 V to 63 V: -55 C to +05 C 80 V to 00 V: -40 C to +05 C Endurance test at 05 C 3000 h to 8000 h Useful life at 05 C 5000 h to h Useful life at 40 C;.8 x l R applied h to h Shelf life at 0 V, 05 C 000 h Based on sectional specification IEC / CECC Climatic category IEC V to 63 V: 55 / 05 / V to 00 V: 40 / 05 / 56 APPLICATIONS SMD technology, for high temperature reflow soldering Industrial and professional applications Automotive, general industrial, telecom Smoothing, filtering, buffering MARKING Rated capacitance (in μf) Rated voltage (in V) Date code, in accordance with IEC Black mark or - sign indicating the cathode (the anode is identified by beveled edges) Code indicating group number (Z) PACKAGING Supplied in blister tape on reel Revision: 2-Apr-7 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 SELECTION CHART FOR C R, U R, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) C R U R (V) (μf) x 6 x x 6 x 6 6 x 6 x 6 6 x 6 x 2 8 x 8 x x 6 x 2 6 x 6 x 2 8 x 8 x 6 8 x 8 x 6 8 x 8 x x 6 x 6 8 x 8 x 2 8 x 8 x x 6 x 6 6 x 6 x 2 8 x 8 x x 6 x 6 6 x 6 x 2 8 x 8 x 6 8 x 8 x x 6 x 6 6 x 6 x 2 8 x 8 x 6 8 x 8 x x 6 x 6 6 x 6 x 2 8 x 8 x 6 8 x 8 x x 6 x 6 6 x 6 x 2 8 x 8 x 6 8 x 8 x x 6 x 2 8 x 8 x 6 8 x 8 x x 8 x pin: Ø 6 mm 35V 000u H4E Z min. 0.4 / max..0 (2 x) H MAX. max. 0.3 D W MAX. B L MAX. S L MAX. Fig. - Dimensional outline Table DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE L x W x H CASE CODE L MAX. W MAX. H MAX. Ø D B MAX. S L MAX. MASS (g) 6 x 6 x x 6 x x 8 x x 8 x Revision: 2-Apr-7 2 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE L x W x H CASE CODE PITCH P Note Detailed tape dimensions see section PACKAGING TAPE WIDTH W TAPE THICKNESS T 2 REEL DIAMETER PACKAGING QUANTITY PER REEL 6 x 6 x x 6 x x 8 x x 8 x MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. a c a b Case size Ø D 6 mm Fig. 2 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c Revision: 2-Apr-7 3 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS ACCORDING TO JEDEC J-STD-020 T ( C) T Peak t 4 t 3 50 t 2 t 25 time (s) Fig. 3 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL225099xxxE3 PROFILE FEATURES Maximum time from 25 C to T Peak Maximum ramp-up rate to 50 C Maximum time from 50 C to 200 C (t ) Maximum time from 90 C to 200 C (t 2 ) Ramp up rate from 200 C to T Peak Maximum time above T Liquidus (27 C) (t 3 ) Maximum time above 230 C (t 4 ) CASE CODE 66 TO s 3 K/s 50 s 0 s 0.5 K/s to 3 K/s 90 s 60 s Peak temperature T Peak 245 C Maximum time above T Peak minus 5 C Ramp-down rate from T Liquidus 30 s 3 K/s to 6 K/s Notes Temperature measuring point on top of the case and on terminals Max. 2 runs with pause of min. 30 min in between Revision: 2-Apr-7 4 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 ELECTRICAL DATA SYMBOL DESCRIPTION C R Rated capacitance at 00 Hz, tolerance ± 20 % I R Rated RMS ripple current at 00 khz, 05 C I L2 Max. leakage current after 2 min at U R tan δ Max. dissipation factor at 00 Hz Z Max. impedance at 00 khz ORDERING EXAMPLE Electrolytic capacitor series 2200 μf / 35 V; ± 20 % Nominal case size: 8 mm x 8 mm x 2 mm; taped on reel Ordering code: MAL E3 Note Unless otherwise specified, all electrical values in Table 5 apply at T amb = 20 C, P = 86 kpa to 06 kpa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) C R (μf) NOMINAL CASE SIZE L x W x H (mm) I R 05 C 00 khz (ma) I L 2 min (μa) tan δ 00 Hz Z 00 khz 20 C (Ω) Note () Determines the applicable row in the table Endurance Test Duration and Useful Life Z 00 khz -40 C (Ω) LIFE CODE () ORDERING CODE MAL x 6 x L2 9933E x 6 x L2 9934E x 8 x L2 9935E x 8 x L2 9936E x 6 x L2 9945E x 6 x L2 9946E x 8 x L2 9947E x 8 x L2 9948E x 6 x L2 9955E x 6 x L2 9956E x 8 x L2 9957E x 8 x L2 9958E x 6 x L2 9965E x 6 x L2 9966E x 8 x L2 9967E x 8 x L2 9968E x 6 x L2 9904E x 6 x L2 9905E x 8 x L2 9906E x 8 x L2 9907E x 6 x L2 994E x 6 x L2 995E x 8 x L2 996E x 8 x L2 997E x 6 x L2 9986E x 6 x L2 9987E x 8 x L2 9988E x 8 x L2 9989E x 6 x L 99705E x 6 x L 99706E x 8 x L 99707E x 8 x L 99708E x 6 x L 99909E x 6 x L 999E x 8 x L 9992E x 8 x L 9993E3 Revision: 2-Apr-7 5 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 Table 6 EXTENDED VIBRATION SPECIFICATIONS PARAMETER PROCEDURE REQUIREMENTS Vibration improvement From 0 g to 30 g No visible damage; Vibration frequency range Vibration profile 0 Hz to 2 khz Constant sinus sweep 3 directions 8 h per direction no leakage of electrolyte; marking legible ΔC/C: ± 5 % with respect to initial measurements 60 Acceleration (g) Improved SMD 20 0 Vishay extended AEC-Q f (khz) Fig. 4 - Vibration profile Table 7 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods IEC , subclause 4.4 U s. x U R Reverse voltage for short periods IEC , subclause 4.6 U rev V Current Leakage current After 2 min at U R I L2 0.0 x C R x U R Inductance Equivalent series inductance (ESL) Ø D 6 mm Typ. nh Resistance Equivalent series resistance (ESR) at 00 Hz Calculated from tan δ max. and C R (see Table 6) ESR = tan δ/2πfc R CAPACITANCE.2.2 C/C , 3 C/C Curve : 0 V Curve 2: 63 V Curve 3: 00 V T ( C) C 0 = capacitance at 20 C, 00 Hz Fig. 5 - Typical multiplier of capacitance as a function of temperature at 00 Hz Curve : 0 V Curve 2: 63 V, 00 V f (Hz) C 0 = typical capacitance at 20 C, 00 Hz Fig. 6 - Typical multiplier of capacitance as a function of frequency at 20 C Revision: 2-Apr-7 6 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 EQUIVALENT SERIES RESISTANCE (ESR) 00 ESR/ ESR ESR/ ESR 0 Curve : 6.3 V to 63 V Curve 2: 00 V T ( C) ESR 0 = typical ESR at 20 C, 00 Hz Fig. 7 - Typical multiplier of ESR as a function of temperature at 00 Hz DISSIPATION FACTOR (tan δ) f (Hz) ESR 0 = typical ESR at 20 C, 00 Hz IMPEDANCE (Z) 00 Fig. 8 - Typical multiplier ESR as a function of frequency at 20 C tan/ tan Z/Z Curve : 6.3 V to 63 V Curve 2: 00 V T ( C) tan δ 0 = typical tan δ at 20 C, 00 Hz Fig. 9 - Typical multiplier of dissipation factor tan δ as a function of temperature at 20 C at 00 Hz Curve : 6.3 V to 63 V Curve 2: 00 V T ( C) Z 0 = typical impedance Z at 20 C, 00 khz Fig. 0 - Typical multiplier of impedance Z as a function of temperature at 00 khz IMPEDANCE (Z) 00 Z (Ω) Z (Ω) f (Hz) Fig. - Typical impedance Z as a function of frequency at 20 C f (Hz) Fig. 2 - Typical impedance Z as a function of frequency at 20 C Revision: 2-Apr-7 7 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 RIPPLE CURRENT AND USEFUL LIFE Table 8 ENDURANCE TEST DURATION AND USEFUL LIFE LIFE CODE ENDURANCE USEFUL LIFE USEFUL LIFE AT 40 C AT 25 C (h) AT 25 C (h).8 x I R APPLIED (h) L L Note Multiplier of useful life code: CCC CCC206 I A I R Lifetime multiplier I A = actual ripple current at 00 khz I R = rated ripple current at 00 khz, 05 C () Useful life at 05 C and I R applied: see Table () T amb ( C) Fig. 3 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 9 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY V R (V) FREQUENCY (Hz) I R MULTIPLIER Revision: 2-Apr-7 8 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 Table 0 TEST PROCEDURES AND REQUIREMENTS NAME OF TEST Mounting Endurance Useful life Shelf life (storage at high temperature) TEST REFERENCE IEC , subclause 4.3 IEC / CECC32 300, subclause 4.5 CECC 30 30, subclause.8. IEC / CECC32 300, subclause 4.7 PROCEDURE (quick reference) Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter Mounting T amb = 05 C; U R applied; for test duration see Table 8 T amb = 05 C; U R and I R applied; for test duration see Table 8 T amb = 05 C; no voltage applied; 000 h after test: U R to be applied for 30 min, 24 h to 48 h before measurement REQUIREMENTS ΔC/C: ± 5 % tan δ spec. limit I L2 spec. limit U R = 6.3 V; ΔC/C: ± 25 % U R 0 V; ΔC/C: ± 20 % tan δ 2 x spec. limit I L2 spec. limit ΔC/C: ± 30 % tan δ 3 x spec. limit I L2 spec. limit no short or open circuit total failure percentage: % For requirements see Endurance test above Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 2-Apr-7 9 Document Number: For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000

11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MAL E3 MAL E3 MAL E3 MAL E3 MAL E3 MAL E3 MAL E3 MAL E3 MAL E3 MAL E3 MAL E3