DC Film Capacitors MKT Axial Type

Size: px
Start display at page:

Download "DC Film Capacitors MKT Axial Type"

Transcription

1 MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ± ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant LEAD DIAMETER d (mm) D (mm) > >.0 < CLIMATIC TESTING CLASS ACC. TO IEC /0/6 CAPACITANCE RANGE (E1 SERIES) 40 pf to µf MAIN APPLICATIONS Blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications REFERENCE STANDARDS IEC MARKING C-value; tolerance; rated voltage; manufacturer s type; code for dielectric material; manufacturer location; manufacturer s logo; year and week DIELECTRIC Polyester film ELECTRODES Metallized CONSTRUCTION Mono and internal series construction RATED (DC) VOLTAGE 6 V, 0 V, 0 V, 400 V, 60 V, 00 V CAPACITANCE TOLERANCE ± 0 %, ± %, ± % LEADS Tinned wire MAXIMUM APPLICATION TEMPERATURE 0 C PULL TEST ON LEADS Minimum 0 N in direction of leads according to IEC BENT TEST ON LEADS bends trough 90 combined with N tensile strength RELIABILITY Operational life > h (40 C/0. U R ) Failure rate < FIT (40 C/0. U R ) DETAIL SPECIFICATION For more detailed data and test requirements contact: dc-film@vishay.com RATED (AC) VOLTAGE 40 V, 6 V, 160 V, 00 V, 0 V Document Number: 601 For technical questions, contact: dc-film@vishay.com Revision: 08-Dec-08 1

2 MKT 181 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nf) CAPACITANCE (numerically) Example: 468 = 680 nf MKT 181 X XX X X TYPE TOLERANCE Un = 06 = 6 V Un = 01 = 0 V Un = = 0 V Un = 40 = 400 V Un = 6 = 60 V Un = = 00 V 4 6 ± % ± % ± 0 % SPECIAL LETTER FOR TAPED Bulk R Reel G Ammopack Note For detailed tape specifications refer to Packaging Information or end of catalog SPECIFIC REFERENCE DATA DESCRIPTION VALUE Tangent of loss angle: at 1 khz at khz at 0 khz C = 0.1 µf 80 x -4 x -4 0 x µf C = 1.0 µf 80 x -4 x -4 - C 1.0 µf 0 x Capacitor length Maximum pulse rise time (du/dt) R [V/µs] (mm) 6 Vdc 0 Vdc 0 Vdc 400 Vdc 60 Vdc 00 Vdc If the maximum pulse voltage is less than the rated voltage higher du/dt values can be permitted. R between leads, for C 0. µf and U R 0 V > MΩ R between leads, for C 0. µf and U R > 0 V > MΩ RC between leads, for C > 0. µf and U R 0 V > 000 s RC between leads, for C > 0. µf and U R > 0 V > 000 s R between leads and case, 0 V; (foil method) > MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 1.6 x U Rdc, 1 min Maximum application temperature 0 C For technical questions, contact: dc-film@vishay.com Document Number: Revision: 08-Dec-08

3 MKT 181 CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 06 6 Vdc/ 40 Vac VOLTAGE CODE 01 0 Vdc/ 6 Vac VOLTAGE CODE 0 Vdc/ 160 Vac VOLTAGE CODE Vdc/ 00 Vac VOLTAGE CODE 6 (1) 60 Vdc/ 0 Vac VOLTAGE CODE (1) 00 Vdc/ 0 Vac D L D L D L D L D L D L 40 pf pf pf pf pf pf pf pf µf µf µf µf µf µf µf () µf µf () µf () µf () µf () µf µf () () µf () () µf () () µf () µf µf () µf µf Notes Pitch = L +. (1) Not suitable for mains applications () For the smaller size please add -M at the end of the type designation (e.g. MKT 181-/-M) Document Number: 601 For technical questions, contact: dc-film@vishay.com Revision: 08-Dec-08 19

4 MKT 181 RECOMMENDED PACKAGING PACKAGING CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLES G Ammo - MKT G x R Reel 0 MKT R x - Bulk - MKT x Note Attention: Capacitors with L > 1. mm only as bulk available EXAMPLE OF ORDERING CODE TYPE CAPACITANCE CODE VOLTAGE CODE TOLERANCE CODE (1) PACKAGING CODE MKT G Note (1) Tolerance Codes: 4 = % (J); = % (K); 6 = 0 % (M) MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to Packaging information: or end of catalog. Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the capacitor body is in good contact with the printed-circuit board: For L 19 mm capacitors shall be mechanically fixed by the leads For larger pitches the capacitors shall be mounted in the same way and the body clamped The maximum diameter and length of the capacitors are specified in the dimensions table Eccentricity as shown in the drawing below Space Requirements On Printed-Circuit Board The maximum length and width of film capacitors is shown in the drawing: Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. Product height with seating plane as given by IEC 601 as reference: h max. h mm or h max. h' mm 1 mm Storage Temperature Storage temperature: T stg = - C to + 40 C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of ± 1 C, an atmospheric pressure of 86 kpa to 6 kpa and a relative humidity of 0 ± %. For reference testing, a conditioning period shall be applied over 96 ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 0 %. For technical questions, contact: dc-film@vishay.com Document Number: Revision: 08-Dec-08

5 MKT 181 CHARACTERISTICS V RMS 0 Capacitance in µf 00 V RMS Capacitance in µf Vdc 1 4 Permissible AC Voltage vs. Frequency f [Hz] Vdc Permissible AC Voltage vs. Frequency f [Hz] V RMS 0 Capacitance in µf 0 Vdc 1 4 Permissible AC Voltage vs. Frequency V RMS Capacitance in pf and µf f [Hz] 0 60 Vdc 4 Permissible AC Voltage vs. Frequency f [Hz] 00 V RMS Capacitance in µf 00 V RMS Capacitance in pf and µf Vdc 4 Permissible AC Voltage vs. Frequency f [Hz] Vdc 4 Permissible AC Voltage vs. Frequency f [Hz] Document Number: 601 For technical questions, contact: dc-film@vishay.com Revision: 08-Dec-08 1

6 MKT 181 Nominal voltage (AC and DC) as a function of temperature U = f(t A ), T LL T A T UL Capacitance as a function of temperature ΔC/C = f(t A ), T LL T A T UL factor ΔC C = (%) T amb ( C) Capacitance as function of frequency ΔC/C = f(f), 0 Hz f 1 MHz Capacitance Change vs. Frequency ΔC = f (f) f (Hz) C Insulation resistance as a function of temperature R is = f(t A ), T LL T A T UL ΔC C = (%) Capacitance vs. Temperature ΔC/C = f (ϑ) T amb ( C) tan δ = Dissipation factor as function of temperature Δtan δ/tan δ = f(t A ), T LL T A T UL Dissipation Factor (1 khz) vs. Temperature tan δ = f (ϑ) T amb ( C) Dissipation factor as a function of frequency Δtan δ/tan δ = f(f), 0 Hz f 1 MHz L RC (s) T amb ( C) Dissipation Factor vs. Frequency tan δ = f (f) f (Hz) tan δ x 4 For technical questions, contact: dc-film@vishay.com Document Number: 601 Revision: 08-Dec-08

7 MKT 181 Maximum allowed component temperature rise (ΔT) as a function of the ambient temperature (T amb ) 16 ΔT ( C) T 0 amb ( C) HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mw/ C D max. HEAT CONDUCTIVITY (mw/ C) (mm) L = 11 mm L = 14 mm L = 19 mm L = 6. mm L = 1. mm L = 41. mm Document Number: 601 For technical questions, contact: dc-film@vishay.com Revision: 08-Dec-08

8 MKT 181 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free ambient temperature. The power dissipation can be calculated according type detail specification HQN-84-01/1: Technical Information Film Capacitors. The component temperature rise (ΔT) can be measured (see section Measuring the component temperature for more details) or calculated by ΔT = P/G: ΔT = Component temperature rise ( C) P = Power dissipation of the component (mw) G = Heat conductivity of the component (mw/ C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (T amb ) and maximum loaded condition (T C ). The temperature rise is given by ΔT = T C - T amb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (U P ) shall not be greater than the rated DC voltage (U Rdc ). The peak-to-peak voltage (U P-P ) shall not be greater than x U Rac to avoid the ionisation inception level. The voltage peak slope (du/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by U Rdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T du du dt < U dt Rdc dt rated 0 T is the pulse duration The rated voltage pulse slope is valid for ambient temperatures up to 8 C. For higher temperatures a derating factor of % per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits (see figure max. allowed component temperature rise). For technical questions, contact: dc-film@vishay.com Document Number: Revision: 08-Dec-08

9 MKT 181. Since in circuits used at voltages over 80 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 0 times the values mentioned in the table: Heat conductivity 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). Voltage Conditions for 6 Above ALLOWED VOLTAGES T amb 8 C 8 C < T amb 0 C Maximum continuous RMS voltage U Rac 0.8 x U Rac Maximum temperature RMS-overvoltage (< 4 h) 1. x U Rac U Rac Maximum peak voltage (V O-P ) (< s) 1.6 x U Rdc 1. x U Rdc EXAMPLE C = 00 nf - 0 V used for the voltage signal shown in next figure. U P-P = 80 V; U P = 0 V; T 1 = 0. ms; T = 1 ms The ambient temperature is C Checking conditions: 1. The peak voltage U P = 0 V is lower than 0 Vdc. The peak-to-peak voltage 80 V is lower than x 6 Vac = 18 U P-P. The voltage pulse slope (du/dt) = 80 V/00 µs = 0.16 V/µs This is lower than 8 V/µs (see specific reference data for each version) 4. The dissipated power is 60 mw as calculated with fourier terms The temperature rise for W max. = 11. mm and pitch = 6. mm will be 60 mw/1 mw/ C = 4.6 C This is lower than 1 C temperature rise at C, according figure max. allowed component temperature rise. Not applicable 6. Not applicable Voltage Signal Voltage U P U P-P T 1 Time T Document Number: 601 For technical questions, contact: dc-film@vishay.com Revision: 08-Dec-08

10 MKT 181 INSPECTION REQUIREMENTS General Notes: Sub-clause numbers of tests and performance requirements refer to the Sectional Specification, Publication IEC and Specific Reference Data. Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in Chapters General data of this specification 4..1 Initial measurements Capacitance Tangent of loss angle: For C 40 nf at 0 khz or for C > 40 nf at khz 4. Robustness of terminations Tensile: Load N; s No visible damage Bending: Load N; 4 x Resistance to soldering heat Method: 1A Solder bath: 80 C ± C Duration: s 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: Immersion time: ± 0. min Recovery time: Min. 1 h, max. h 4.4. Final measurements Visual examination No visible damage Legible marking Capacitance ΔC/C % of the value measured initially Tangent of loss angle Increase of tan δ 0.00 for: C 0 nf or 0.0 for: 0 nf < C 0 nf or 0.01 for: 0 nf < C 40 nf and 0.00 for: C > 40 nf Compared to values measured in 4..1 SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C Initial measurements Capacitance Tangent of loss angle: For C 40 nf at 0 khz or for C > 40 nf at khz 4.6 Rapid change of temperature θa = - C θb = + 0 C cycles Duration t = 0 min Visual examination No visible damage 4. Vibration Mounting: See section Mounting of this specification Procedure B4 Frequency range: Hz to Hz Amplitude: 0. mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h 4.. Final inspection Visual examination No visible damage For technical questions, contact: dc-film@vishay.com Document Number: Revision: 08-Dec-08

11 MKT 181 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.9 Shock Mounting: See section Mounting of this specification Pulse shape: Half sine Acceleration: 490 m/s² Duration of pulse: 11 ms 4.9. Final measurements Visual examination No visible damage Capacitance ΔC/C % of the value measured in Tangent of loss angle Increase of tan δ 0.00 for: C 0 nf or 0.0 for: 0 nf < C 0 nf or 0.01 for: 0 nf < C 40 nf and 0.00 for: C > 40 nf Compared to values measured in Insulation resistance As specified in section Insulation Resistance of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4. Climatic sequence 4.. Dry heat Temperature: + 0 C Duration: 16 h 4.. Damp heat cyclic Test Db, first cycle 4..4 Cold Temperature: - C Duration: h 4..6 Damp heat cyclic Test Db, remaining cycles Final measurements Voltage proof = U Rdc for 1 min within 1 min after removal from testchamber No breakdown of flash-over Visual examination Capacitance Tangent of loss angle Insulation resistance SUB-GROUP C 4.11 Damp heat steady state 6 days, 40 C, 90 % to 9 % RH Initial measurements Capacitance Tangent of loss angle at 1 khz No visible damage Legible marking ΔC/C % of the value measured in 4.4. or 4.9. Increase of tan δ 0.00 for: C 0 nf or 0.0 for: 0 nf < C 0 nf or 0.01 for: 0 nf < C 40 nf and 0.00 for: C > 40 nf Compared to values measured in 4..1 or % of values specified in section Insulation resistance of this specification Document Number: 601 For technical questions, contact: dc-film@vishay.com Revision: 08-Dec-08

12 MKT 181 SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS Final measurements Voltage proof = U Rdc for 1 min within 1 min after removal from testchamber Visual examination Capacitance No breakdown of flash-over No visible damage Legible marking ΔC/C % of the value measured in Tangent of loss angle Increase of tan δ 0.00 Compared to values measured in Insulation resistance 0 % of values specified in section Insulation resistance of this specification SUB-GROUP C 4.1 Endurance Duration: 000 h 1. x U Rdc at 8 C 1.0 x U Rdc at 0 C Initial measurements Capacitance Tangent of loss angle: For C 40 nf at 0 khz or for C > 40 nf at khz 4.1. Final measurements Visual examination No visible damage Legible marking Capacitance ΔC/C % compared to values measured in Tangent of loss angle Increase of tan δ 0.00 for: C 0 nf or 0.0 for: 0 nf < C 0 nf or 0.01 for: 0 nf < C 40 nf and 0.00 for: C > 40 nf Compared to values measured in Insulation resistance 0 % of values specified in section Insulation resistance of this specification SUB-GROUP C4 4.1 Charge and discharge 000 cycles Charged to U Rdc Discharge resistance: U R = R C. ( du dt) R Initial measurements Capacitance Tangent of loss angle: For C 40 nf at 0 khz or for C > 40 nf at khz 4.1. Final measurements Capacitance ΔC/C % compared to values measured in Tangent of loss angle Increase of tan δ 0.00 for: C 0 nf or 0.0 for: 0 nf < C 0 nf or 0.01 for: 0 nf < C 40 nf and 0.00 for: C > 40 nf Compared to values measured in Insulation resistance 0 % of values specified in section Insulation resistance of this specification For technical questions, contact: dc-film@vishay.com Document Number: Revision: 08-Dec-08

13 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 011/6/EU of The European Parliament and of the Council of June 8, 011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 00/9/EC. We confirm that all the products identified as being compliant to Directive 00/9/EC conform to Directive 011/6/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS09A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS09A standards. Revision: 0-Oct-1 1 Document Number: 900

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations

More information

Metallized Polyester Film Capacitors MKT Radial Potted Types

Metallized Polyester Film Capacitors MKT Radial Potted Types www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,

More information

Metallized Polyester Film Capacitors MKT Radial Potted Type

Metallized Polyester Film Capacitors MKT Radial Potted Type www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance

More information

DC Film Capacitors MKT Radial Lacquered Type

DC Film Capacitors MKT Radial Lacquered Type l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 7.62 mm lead pitch. Supplied loose in box and taped on reel or ammopack AEC-Q200 qualified Material categorization: For definitions of compliance please

More information

DC Film Capacitors MKT Radial Lacquered Type

DC Film Capacitors MKT Radial Lacquered Type DC Film Capacitors MKT Radial Lacquered Type FEATURES Available taped and loose in box Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992

More information

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS

More information

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch; 7.5 mm bent back pitch Low contact resistance Low loss dielectric Small dimensions

More information

Metallized Polyester Film Capacitors MKT Radial Potted Type

Metallized Polyester Film Capacitors MKT Radial Potted Type Metallized Polyester Film Capacitors MKT470 FEATURES 168x12(halfpage) l w Pitch 5 mm available loose in box, ammopack and taped on reel. Compliant to RoHS Directive 2002/95/EC P±0.3 Dimensions in APPLICATIONS

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 5.08 mm lead pitch Supplied loose in box, taped on ammopack or reel AEC-Q200 qualified (rev. D) Material categorization: for definitions of compliance

More information

Metallized Polypropylene Film Capacitor Radial Snubber Type

Metallized Polypropylene Film Capacitor Radial Snubber Type Metallized Polypropylene Film Capacitor Radial Snubber Type FEATURES Reduce EMI by clamping voltage and current ringing High pulse strength (dv/dt up to 2500 V/μs) Low inductance construction (low ESL)

More information

Metallized polyester film capacitors MKT 470

Metallized polyester film capacitors MKT 470 MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated

More information

Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line

Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line FEATURES 15 mm to 27.5 mm lead pitch 440 V rated AC voltage Material categorization: For definitions of

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type Interference Suppression Film Capacitors MKP338 1 X1 P l h lt w Ø d t F' (1) F 10 l h h' H w Ø d t FEATURES 15 mm to 27.5 mm lead pitch and 15 mm bent back to 7.5 mm Supplied loose in box, taped on ammopack

More information

THB AC Filtering Metalized Polypropylene Film Capacitor Radial Type 85 C / 85 % RH 1000 h at U NAC

THB AC Filtering Metalized Polypropylene Film Capacitor Radial Type 85 C / 85 % RH 1000 h at U NAC THB AC Filtering Metalized Polypropylene Film Capacitor Radial Type 85 C / 85 % RH 00 h at U NAC FEATURES High robustness under high humidity THB 85 C, 85 % RH, 00 h at rated U NAC UL 8 (electrical pending)

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

Aluminum Capacitors SMD (Chip) Long Life Vertical

Aluminum Capacitors SMD (Chip) Long Life Vertical Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum

More information

AC and Pulse Film/Foil Capacitors Radial Potted Type

AC and Pulse Film/Foil Capacitors Radial Potted Type KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please

More information

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced

More information

Snubber MMKP 386 AC and pulse double metallized film capacitor

Snubber MMKP 386 AC and pulse double metallized film capacitor Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP

More information

Metallized Polyester Film Capacitor Related Document: IEC

Metallized Polyester Film Capacitor Related Document: IEC Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D

More information

Aluminum Capacitors Solid Axial

Aluminum Capacitors Solid Axial SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range

More information

Aluminum Electrolytic Capacitors Power Long Life Snap-In

Aluminum Electrolytic Capacitors Power Long Life Snap-In Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance

More information

Standard Metal Film Leaded Resistors

Standard Metal Film Leaded Resistors Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes

More information

Aluminum Capacitors Power Standard Miniature Snap-In

Aluminum Capacitors Power Standard Miniature Snap-In Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE

More information

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005

More information

Aluminum Capacitors Power Printed Wiring Style

Aluminum Capacitors Power Printed Wiring Style FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high

More information

Standard Metal Film Leaded Resistors

Standard Metal Film Leaded Resistors Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of

More information

Small Signal Fast Switching Diode

Small Signal Fast Switching Diode Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial

More information

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box

More information

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC

More information

Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type

Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,

More information

Aluminum Electrolytic Capacitors Axial Standard

Aluminum Electrolytic Capacitors Axial Standard 00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type Interference Suppression Film Capacitors MKP 336 6 Y2 l w FEATURES 10 mm to 15 mm lead pitch. Supplied loose in box, taped on reel Compliant to RoHS directive 2002/95/EC h PERMISSIBLE C VOLTAGE C V P ±

More information

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.

Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable

More information

Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor

Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier

More information

Aluminum Capacitors SMD (Chip) Long Life Vertical

Aluminum Capacitors SMD (Chip) Long Life Vertical Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction

More information

Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance

Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D

More information

Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor

Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead

More information

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC

More information

Interference suppression film capacitors MKP 336 1

Interference suppression film capacitors MKP 336 1 MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell

More information

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow

More information

Zener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box

Zener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13 reel) /box Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes

More information

Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks

Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive

More information

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic

More information

Aluminum Capacitors SMD (Chip), High Temperature

Aluminum Capacitors SMD (Chip), High Temperature Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC Metallized Polypropylene Film Capacitor Related Document: IEC 6084-6 MKP 84 L Max. Dimensions in millimeters W Max. Marking FEATURES Product is completely lead (Pb)-free Product is RoHS-compliant 0.6 pcm

More information

Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical

Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction

More information

Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance

Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low

More information

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability

Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise TZMC-

More information

Green Thick Film Chip Resistors

Green Thick Film Chip Resistors Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions

More information

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with

More information

Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability

Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,

More information

Aluminum Capacitors Axial Miniature, Long-Life

Aluminum Capacitors Axial Miniature, Long-Life 8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical

More information

Ceramic Disc Capacitors Class 1, 3 kv DC

Ceramic Disc Capacitors Class 1, 3 kv DC S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC

More information

Standard Carbon Film Leaded Resistors

Standard Carbon Film Leaded Resistors Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable

More information

Aluminum Electrolytic Capacitors Power Economic Printed Wiring

Aluminum Electrolytic Capacitors Power Economic Printed Wiring Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated

More information

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions

More information

Fusible Carbon Film MELF Resistors

Fusible Carbon Film MELF Resistors Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin

More information

Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage

Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage Electrical Double Layer Energy Storage Capacitors Up to 3 V Operating Voltage FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 3.0 V Available in through-hole

More information

Aluminum Electrolytic Capacitors Radial Miniature Long Life

Aluminum Electrolytic Capacitors Radial Miniature Long Life Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE

More information

5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed

5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed 5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic

More information

Small Signal Zener Diodes

Small Signal Zener Diodes Small Signal Zener Diodes FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise AEC-Q qualified Compliant to RoHS Directive 22/95/EC and in accordance to WEEE

More information

Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications

Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic

More information

Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors

Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V

More information

Hyperfast Rectifier, 1 A FRED Pt

Hyperfast Rectifier, 1 A FRED Pt Hyperfast Rectifier, 1 A FRED Pt SMF (DO-219AB) Cathode Anode FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 17 C maximum operating junction temperature Low forward voltage drop Low

More information

Aluminum Electrolytic Capacitors Power Long Life Snap-In

Aluminum Electrolytic Capacitors Power Long Life Snap-In Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance

More information

Aluminum Capacitors Radial Very Low Impedance

Aluminum Capacitors Radial Very Low Impedance 6 RVI Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with RoHS COMPLIANT pressure relief, insulated with a blue vinyl

More information

Filter Inductors, High Current, Radial Leaded

Filter Inductors, High Current, Radial Leaded Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering

More information

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING

Aluminum Capacitors FEATURES APPLICATIONS PACKAGING Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage

More information

Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In

Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request

More information

Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case

Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:

More information

Long Side Termination Thick Film Chip Resistors

Long Side Termination Thick Film Chip Resistors FEATURES Enhanced power rating Long side terminations Protective overglaze Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes

More information

Cemented Wirewound Resistors

Cemented Wirewound Resistors Cemented Wirewound Resistors STANDARD EECTRICA SPECIFICATIONS MODE POWER RATING P 40 C W POWER RATING P 70 C W IMITING VOTAGE U max. Notes () Resistance value to be selected for ± 5 % from E24 (2) AC03

More information

High Brightness LED Power Module

High Brightness LED Power Module High Brightness LED Power Module Vishay Semiconductors 22139 22140 DESCRIPTION The VLSL41xxA are metal core based high brightness LED power modules, assembled with 12, 24 or 3 HB white LEDs. The color

More information

High Brightness LED Power Module

High Brightness LED Power Module High Brightness LED Power Module 22139 22438 DESCRIPTION VLPC0303A2, and VLPW0303A2 are metal core based high brightness LED power modules assembled with 9 HB white LEDs. VLPC0303A2 is a cool white version

More information

Energy Storage Double Layer Capacitors

Energy Storage Double Layer Capacitors 96 DLC Energy Storage Double Layer Capacitors FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double layer Radial leads,

More information

Through Hole Transformers, Pulse, Trigger Type

Through Hole Transformers, Pulse, Trigger Type Through Hole Transformers, Pulse, Trigger Type STANDARD ELECTRICAL SPECIFICATIONS PRIMARY IND. MIN. (mh) PRIMARY DCR MAX. ( ) Notes () Hipot voltage will meet international safety standards () Low profile

More information

Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications

Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic

More information

Aluminum Electrolytic Capacitors Radial Semi-Professional

Aluminum Electrolytic Capacitors Radial Semi-Professional Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering

More information

Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved

Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (types CTS13) -55 C to +125 C (types CTS1, 749DX)

More information

Ruggedized Electrical Double Layer Energy Storage Capacitors

Ruggedized Electrical Double Layer Energy Storage Capacitors Ruggedized Electrical Double Layer Energy Storage Capacitors FEATURES Polarized energy storage capacitor with high capacity and energy density Rated voltage: 2.7 V Available in through-hole (radial) version

More information