Three Core XLPE/LSF/SWA/LSF Power Cable

Transcription

1 1 Three Core XLPE/LSF/SWA/LSF Power Cable./ kv Application LSF armoured power cable for use in fixed installations. Especially for use in areas where fire would create dense smoke and toxic fumes causing a major threat to life and equipment. Specifications In accordance with BS. s: Stranded Class copper conductors to BS EN 0. Extruded semi-conducting layer. Insulation: XLPE insulation. Extruded semi-conducting layer. Plain copper tape screen. Inner Sheath: LSF inner sheath Type LTS1 to BS. Mild galvanised steel wires to BSEN-1. Outer Sheath: Red LSF outer sheath Type LTS1 to BS. Flame retardant to BS EN 0-- & IEC0-- Cat. C as a minimum. Temperature Rating: 0 C maximum conductor operating temperature. Voltage Rating: 0/000V. For further technical information refer to page 1:

2 Anixter Number AEN- Number of Cores Three Core XLPE/LSF/SWA/LSF Power Cable./kV Insulation Thickness Diameter Under Armour Armour Wire Size O/D Approx Weight kg/km Minimum Bending Radius During Installation Adjacent to joints and Termination

3 1 Technical Information 1 and core XLPE Insulated Cables 00/00V, 0/000V & 00/000V For further guidance refer to the BS1 (IEE Wiring Regulations - latest edition). NB. High voltage cables are not specifically covered in IEE Wiring Regulations but reference should be made to ensure compliance. For ambient air and ground temperatures other than those specified, the following factors should be applied. Cables laid in air Ambient air temp C Rating factor Cables laid direct in ground and in single-way ducts Ground temp C Rating factor Standard depth of laying 0.m Thermal resistivity of soil 1. C m/w Standard ground temperature C Ambient air temperature C Maximum conductor temperature 0 C NOTE: All circuits thermally independent Cables in trefoil group are solidly bonded Cables in flat formation are single point bonded 01 0

4 CURRENT CARRYING CAPACITY (Amperes) Single Core./. kv,./ kv,./ kv 0 Hz Direct Burial Duct Air Cables Trefoil Flat Spaced Technical Information Cables Cables Trefoil Flat Touching Trefoil Flat Spaced Arm d Arm d Unarm d Arm d Unarm d Arm d Unarm d Arm d Unarm d Arm d Core./. kv,./ kv,./ kv 0 Hz XLPE/PVC/SWA/PVC & XLPE/LSF/SWA/LSF Direct Burial In Single-Way Duct Air Core Core Core Arm d Arm d Arm d

5 Single core PCU/XLPE/PVC 0/000V to BS Single core PCU/XLPE/AWA/PVC 0/000V to BS ELECTRICAL CHARACTERISTICS Size Maximum d.c. 0ºC Three core PCU/XLPE/PVC 0/000V to BS Three core PCU/XLPE/PVC/SWA/PVC 0/000V to BS ELECTRICAL CHARACTERISTICS Maximum a.c. 0ºC Also applicable to LSF sheathed versions to BS 0Hz Technical Information 0ºC, 0Hz Single Core Cables in Trefoil Single Core Cables in Trefoil Unarm d Arm d Unarm d Arm d Unarm d Arm d Size Maximum d.c. 0ºC Maximum a.c. 0ºC 0Hz 0ºC, 0Hz

6 1 Additional Technical Information Short-Circuit Ratings XLPE Insulated Cables Short-Circuit Ratings Size 0.s duration ka 1.0s duration ka s duration ka N.B: The above ratings assume an adiabatic temperature rise and are based on a conductor temperature of 0ºC at start of short-circuit and 0ºC at end of shortcircuit.