BLUECOIF THERM DV PNEU
|
|
|
- Johnathan Walker
- 6 years ago
- Views:
Transcription
1 (BIAISE) DOP_EN1873_215,1 ANG N 215,1 Name, registered trade name or trade mark and contact adress of the manufacturer ( 4*) Name : BLUETEK (Head office : ZI Nord les Pins Luynes) Production units location : HEXADOME : H01-ZI Nord les Pins Luynes/H02-Rue Marc Seguin Ambert // SIH : S01-Le Haras Sarralbe // SODILIGHT : S02-Route de Saulon Gevrey-Chambertin Product description ( 3*) NSHEV with a double flap, pneumatic mechanism, reinforced insulation Renovation upstand height 600mm Possible options ( 3*) Griddle Intended use of the construction product, in accordance with the applicable harmonised technical specification ( 3*) Maximum authorized inclinaiton of the plan to support the upstand : Hinges parallel to the ridge : 3 (5%) Hinges perpendicular to the ridge for S/M/L models: 25 (46%) inclination limit 15 or 26% in case of coupling between pneumatic and electric cylinder Hinges perpendicular to the ridge for XL model : 10 (18%) System or systems of assessment and verification if constancy of performance of the construction product : ( 6 7 *) System 3 according to Annexe ZA of European Norm EN 1873, List of notified testing laboratories (and NANDO List Nr) : CSTC (NB 1136 ) / CSTB (NB 0679) / LNE (NB 0071) / Fraunhofer (NB 0765) Declared performances ( 9*) Shock resistance Criteria Value obtained for this range Reference EN1873 Watertightness Succeed UL Classification for resistance to ascending loads See table below DL Classification for resistance to lowering loads See table below Large sized soft body (SB) SB1200 with a fall-arrest device Small sized hard body Succeed td65 g Fire reaction Total light transmission (td65) Solar Factor (g) Complete skylight fire reaction PCA16 7 parois incolore PCA16 7 parois opale PCA16 7 parois calor control PCA 20 7 parois opale PCA 20 7 Parois Transparent PCA32 opalescent PCA32 transparent opale opalescent PCA 16 Pearl Inside PCA 16 Pearl Inside opaque PCA 16 Pearl Inside Calor Control IR White opaque Calor Control 0,61 0,52 0,23 6 0,27 0,37 0, ,17 0,63 0,54 0, ,29 0,35 0, AP Air thightness Classification See table below 5.8 Urc / Arc Infill only Ut = Urc Ref Complete rooflight for : PCA16;PCA20;ci alu isolé;pca32;;pca Pearl Inside16;PCA Pearl Inside20 PCA16 PCA20 ci alu isolé PCA32 PCA Pearl Inside16 PCA Pearl Inside20 Complete skylight with other infills Airbone noise indulation (Rw) 5.10 See table below 2 1,7 0,8 1,15 1,07 2,1 1,9 W/m²K 5.9 = Performance non determined
2 (BIAISE) DOP_EN1873_215,1 ANG N 215,1 C E F G H I K L N O Q R T U W X IV IV IV IV PCA 16 PCA 20 PCA 32 PCA 16 Pearl Inside Urc Arc Urc Arc Urc Arc Urc Arc Urc Arc Urc Arc W/m².K m² W/m².K m² W/m².K m² W/m².K m² W/m².K m² W/m².K m² 170/ ,9 2,9 5,2 2,8 5,3 2,5 5,3 3 5,2 2,9 5,3 2,4 5, / ,9 2,9 5,7 2,8 5,7 2,5 5,8 3 5,7 2,9 5,7 2,4 5, / ,9 2,9 6,2 2,8 6,3 2,4 6,3 3 6,2 2,9 6,3 2,4 6, / ,9 2,9 6,7 2,7 6,8 2,4 6,9 2,9 6,7 2,8 6,8 2, / ,9 2,8 7,3 2,7 7,3 2,4 7,4 2,9 7,3 2,8 7,3 2,3 7, / ,9 2,8 7,9 2,7 7,9 2,3 8 2,9 7,9 2,8 7,9 2,3 8, / ,9 2,8 6,2 2,7 6,2 2,3 6,3 2,8 6,2 2,8 6,2 2,3 6, / ,9 2,7 7,2 2,6 7,3 2,2 7,4 2,8 7,2 2,7 7,3 2,2 7, / ,9 2,8 6,5 2,7 6,5 2,3 6,6 2,8 6,5 2,8 6,5 2,3 6, / ,9 2,7 7,6 2,6 7,6 2,2 7,7 2,8 7,6 2,7 7,6 2,2 7, / ,9 2,8 6,8 2,7 6,8 2,3 6,9 2,8 6,8 2,8 6,8 2, / ,9 2,7 8 2,6 8 2,2 8,1 2,8 8 2,7 8 2,2 8, / ,9 2,8 7,5 2,6 7,5 2,3 7,6 2,8 7,5 2,7 7,5 2,2 7, / ,9 2,7 8,2 2,6 8,2 2,2 8,3 2,8 8,2 2,7 8,2 2,2 8, / ,9 2,7 8,7 2,6 8,7 2,2 8,8 2,8 8,7 2,7 8,7 2,1 8, / ,9 2,8 8,1 2,6 8,1 2,3 8,2 2,8 8,1 2,7 8,1 2,2 8, / ,9 2,7 9,4 2,5 9,5 2,2 9,6 2,8 9,4 2,7 9,5 2,1 9, / ,9 2,7 10,5 2,5 10,6 2,1 10,7 2,8 10,5 2,7 10,6 2,1 10, performance of the product identified in points 1 et 2 is in conformity with the declared performance in point 9.
3 (BIAISE) DOP_EN1873_215,1 ANG N 215,1 C E F G Z AA AC AD AF AG AI AJ AL AM AO AP IV IV IV IV ci alu standard Urc Arc W/m².K m² 170/ ,9 2,3 5, / ,9 2,3 5, / ,9 2,2 6, / ,9 2,2 6, / ,9 2,1 7, / ,9 2,1 8, / ,9 2,1 6, / ,9 2 7, / ,9 2,1 6, / ,9 2 7, / ,9 2, / ,9 2 8, / ,9 2,1 7, / ,9 2 8, / ,9 2 8, / ,9 2,1 8, / ,9 2 9, / ,9 1,9 10, performance of the product identified in points 1 et 2 is in conformity with the declared performance in point 9.
4 (DROITE) DOP_EN1873_215 ANG N 215 Name, registered trade name or trade mark and contact adress of the manufacturer ( 4*) Name : BLUETEK (Head office : ZI Nord les Pins Luynes) Production units location : HEXADOME : H01-ZI Nord les Pins Luynes/H02-Rue Marc Seguin Ambert // SIH : S01-Le Haras Sarralbe // SODILIGHT : S02-Route de Saulon Gevrey-Chambertin Product description ( 3*) NSHEV with a double flap, pneumatic mechanism, reinforced insulation Renovation upstand height 600mm Possible options ( 3*) Griddle Intended use of the construction product, in accordance with the applicable harmonised technical specification ( 3*) Maximum authorized inclinaiton of the plan to support the upstand : Hinges parallel to the ridge : 3 (5%) Hinges perpendicular to the ridge for S/M/L models: 25 (46%) inclination limit 15 or 26% in case of coupling between pneumatic and electric cylinder Hinges perpendicular to the ridge for XL model : 10 (18%) System or systems of assessment and verification if constancy of performance of the construction product : ( 6 7 *) System 3 according to Annexe ZA of European Norm EN 1873, List of notified testing laboratories (and NANDO List Nr) : CSTC (NB 1136 ) / CSTB (NB 0679) / LNE (NB 0071) / Fraunhofer (NB 0765) Declared performances ( 9*) Shock resistance Criteria Value obtained for this range Reference EN1873 Watertightness Succeed UL Classification for resistance to ascending loads See table below DL Classification for resistance to lowering loads See table below Large sized soft body (SB) SB1200 with a fall-arrest device Small sized hard body Succeed td65 g Fire reaction Total light transmission (td65) Solar Factor (g) Complete skylight fire reaction PCA16 7 parois incolore PCA16 7 parois opale PCA16 7 parois calor control PCA 20 7 parois opale PCA 20 7 Parois Transparent PCA32 opalescent PCA32 transparent opale opalescent PCA 16 Pearl Inside PCA 16 Pearl Inside opaque PCA 16 Pearl Inside Calor Control IR White opaque Calor Control 0,61 0,52 0,23 6 0,27 0,37 0, ,17 0,63 0,54 0, ,29 0,35 0, AP Air thightness Classification See table below 5.8 Urc / Arc Infill only Ut = Urc Ref Complete rooflight for : PCA16;PCA20;ci alu isolé;pca32;;pca Pearl Inside16;PCA Pearl Inside20 PCA16 PCA20 ci alu isolé PCA32 PCA Pearl Inside16 PCA Pearl Inside20 Complete skylight with other infills Airbone noise indulation (Rw) 5.10 See table below 2 1,7 0,8 1,15 1,07 2,1 1,9 W/m²K 5.9 = Performance non determined
5 (DROITE) DOP_EN1873_215 ANG N 215 C E F G H I K L N O Q R T U W X IV IV IV IV PCA 16 PCA 20 PCA 32 PCA 16 Pearl Inside Urc Arc Urc Arc Urc Arc Urc Arc Urc Arc Urc Arc W/m².K m² W/m².K m² W/m².K m² W/m².K m² W/m².K m² W/m².K m² 160/ ,9 3,5 4,1 3,2 4,1 2,9 4,2 3,6 4,1 3,4 4,1 2,9 4, / ,9 3,4 4,5 3,2 4,6 2,9 4,6 3,5 4,5 3,3 4,6 2,8 4, / ,9 3,4 5 3,1 5 2,8 5,1 3,5 5 3,3 5 2,7 5, / ,9 3,3 5,4 3,1 5,5 2,7 5,6 3,4 5,4 3,2 5,5 2,7 5, / ,9 3,3 5, ,7 6,1 3,4 5,9 3,2 6 2,6 6, / ,9 3,2 6,4 3 6,5 2,6 6,6 3,3 6,4 3,1 6,5 2,6 6, / ,9 3,2 7 2,9 7 2,6 7,1 3,3 7 3,1 7 2,5 7, / ,9 3,4 4 3,1 4 2,8 4,1 3,5 4 3,3 4 2,8 4, / ,9 3,3 4,3 3,1 4,3 2,8 4,4 3,4 4,3 3,2 4,3 2,7 4, / ,9 3,3 4,6 3 4,6 2,7 4,7 3,4 4,6 3,2 4,6 2,6 4, / ,9 3,3 4,8 3 4,8 2,7 4,9 3,3 4,8 3,1 4,8 2, / ,9 3,2 5,6 2,9 5,7 2,6 5,8 3,3 5,6 3,1 5,7 2,5 5, / ,9 3,4 4,4 3,1 4,5 2,8 4,6 3,4 4,4 3,2 4,5 2,7 4, / ,9 3,2 5,4 3 5,4 2,6 5,5 3,3 5,4 3,1 5,4 2,6 5, / ,9 3,1 6,3 2,9 6,3 2,5 6,5 3,2 6,3 3 6,3 2,5 6, / ,9 3,3 4,7 3,1 4,7 2,8 4,8 3,4 4,7 3,2 4,7 2,7 4, / ,9 3,2 5,7 3 5,7 2,6 5,8 3,3 5,7 3,1 5,7 2,5 5, / ,9 3,1 6,7 2,9 6,7 2,5 6,8 3,2 6,7 3 6,7 2,4 6, / ,9 3,3 4,9 3,1 5 2,7 5,1 3,4 4,9 3,2 5 2,7 5, / ,9 3,2 6 2,9 6 2,6 6,1 3,3 6 3,1 6 2,5 6, / ,9 3,1 7 2,8 7 2,5 7,2 3, ,4 7, / ,9 3,2 6,6 2,9 6,6 2,5 6,7 3,2 6,6 3 6,6 2,5 6, / ,9 3,1 7,2 2,8 7,3 2,5 7,4 3,2 7,2 3 7,3 2,4 7, / ,9 3,1 7,7 2,8 7,7 2,4 7,9 3,1 7,7 2,9 7,7 2, / ,9 3,1 7,2 2,9 7,2 2,5 7,3 3,2 7,2 3 7,2 2,5 7, / ,9 3 8,4 2,8 8,4 2,4 8,6 3,1 8,4 2,9 8,4 2,3 8, performance of the product identified in points 1 et 2 is in conformity with the declared performance in point 9.
6 (DROITE) DOP_EN1873_215 ANG N 215 C E F G Z AA AC AD AF AG AI AJ AL AM AO AP IV IV IV IV ci alu standard Urc Arc W/m².K m² 160/ ,9 2,7 4, / ,9 2,6 4, / ,9 2,5 5, / ,9 2,5 5, / ,9 2,4 6, / ,9 2,4 6, / ,9 2,3 7, / ,9 2,6 4, / ,9 2,5 4, / ,9 2,5 4, / ,9 2, / ,9 2,3 5, / ,9 2,5 4, / ,9 2,4 5, / ,9 2,3 6, / ,9 2,5 4, / ,9 2,4 5, / ,9 2,2 6, / ,9 2,5 5, / ,9 2,3 6, / ,9 2,2 7, / ,9 2,3 6, / ,9 2,2 7, / ,9 2,2 7, / ,9 2,3 7, / ,9 2,1 8, performance of the product identified in points 1 et 2 is in conformity with the declared performance in point 9.
BLUECOIF THERM TREUIL
Productrange designation ( *) BLUCOIF THRM TRUIL BLUCOIF THRM TRUIL (BIAIS) DCLARATION OF PRFORMANC OF A SKYLIGHT RANG According to Construction Products Council Directive U DOP_N1873_14,1_BLUCOIF THRM
DECLARATION OF PERFORMANCE
EN DECLARATION OF PERFORMANCE DoP No. Hilti HUS3 0672-CPD-0361 1. Unique identification code of the product-type: Hilti Screw Anchor HUS3 2. Type, batch or serial number as required pursuant to Article
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 0077-2 First edition 2003-0-0 Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames Performance thermique
ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS
Revision index Date of implementation A 15/03/2013 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincarré, 75782 Paris Cedex 16 Tel. 33.(0)1.64.68.84.97 Fax. 33.(0)1.64.68.83.45
TECHNICAL INFORMATION
TECHNICAL INFORMATION RATED PRIMARY OLTAGE () This is the supply assigned to the transformer by the manufacturer. RATED SECONDARY OLTAGE () This is the secondary output assigned to the transformer when
Electrical installation solutions for buildings Technical details Arc Fault Detection Devices
/1 Electrical installation solutions for buildings Technical details Arc Fault Detection Devices Index Functions and classification criteria for AFDD /2 Power loss, derating and performance in altitude
S R O T C U D IN & MYRRA
TRANSFORMERS & INDUCTORS MYRRA...Of course! TECHNICAL INFORMATION RATED PRIMARY OLTAGE () This is the supply assigned to the transformer by the manufacturer. RATED SECONDARY OLTAGE () This is the secondary
DECLARATION OF PERFORMANCE No. 37/X-PIR/OBO
DoP 37/X-/OBO (EN) Page 1/6 DECLARATION OF PERFORMANCE No. 37/X-/OBO 1. Unique identification code of product-type: Sandwich panel SP2B X-, SP2B X- ENERGY, SP2E X-, SP2E X- ENERGY with polyisocyanurate
Determination of installed thermal resistance into a roof of TRISO-SUPER 12 BOOST R
INSTITUTE OF ARCHITECTURE AND CONSTRUCTION OF KAUNAS UNIVERSITY OF TECHNOLOGY LABORATORY OF BUILDING PHYSICS Notified Body number: 2018 TEST REPORT No. 037-10/11(C) SF/15 Date: 26 of November 2015 page
Test report CVN Project number Page 2 of 2
Project number 604545 Page 2 of 2 Tests : Results : The diaphragm gas meters as specified in annex 2 were tested for compliance with the European Standard BS EN 1359 : 1999 "Gas meters - Diaphragm gas
DIF SEK. PART 5a WORKED EXAMPLES. DIFSEK Part 5a: Worked examples 0 / 62
DIF SEK PART 5a WORKED EXAMPLES DIFSEK Part 5a: Worked examples 0 / 62 Resistance to fire - Chain of events Θ Loads 1: Ignition time Steel columns 2: Thermal action 3: Mechanical actions R 4: Thermal response
Film Capacitors. EMI suppression capacitors. Date: June 2018
Film Capacitors EMI suppression capacitors Date: June 2018 EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
TEST CERTIFICATES OR REPORTS ISSUED BY VEIKI-VNL LTD.
Page 2 of 29 TEST CERTIFICATES OR REPORTS ISSUED BY LTD. Type Test Certificate of Complete Type Test This certificate provides the verification of all the rated characteristics of the equipment as assigned
Declaration of Performance
Styrozone T N300/H350/N500/N700 1000.CPR.STYROZON.T.2013.002 Unique identification code of the product-type: STYROZON T H350 Harmonised technical specification: BS-N 13164 Notified body/ies: AFITI LICOF.NB
VK2 volume flow controller Overview
New option with sound attenuator Maintenance-free VK2 volume flow controller that operates without an auxiliary power supply, for ventilation and air conditioning systems. Adjustable on site. Outstanding
SCREEN LOW E SATINÉ 5500 LOW E
SCREEN LOW E SATINÉ 5500 LOW E SCREEN LOW E SATINÉ 5500 LOW E INTELLIGENT FABRICS FOR SOLAR PROTECTION COLLECTION 2018 2021 INTERNAL APPLICATION www.sunscreen-mermet.com SATINÉ 5500 LOW E THERMAL SHIELD
9.1 Compatibility of modules for nonautomatic weighing instruments (NAWIs) Common requirements
Übersetzung aus: Verwaltungsvorschriften gesetzliches Messwesen (administrative regulations legal metrology) 9.1 Compatibility of modules for nonautomatic weighing instruments (NAWIs) 9.1.1 Common requirements
Window air permeability measurement, watertightness and resistance to wind load (designation of the test)
KTU INSTITUTE OF ARCHITECTURE AND CONSTRUCTION BUILDING THERMAL PHYSICS Notified Body number: 2018 BANDYMAI ISO/IEC 17025 Nr. LA. 01.031 Test performed: Product: Page (pages) 05 of August 2013 1 (8) Window
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
Collector test according to EN ,2:2002
Test Report: KTB Nr. 2003-18-b-en Collector test according to EN 12975-1,2:2002 for: RM Solar Ltd Brand Name: S-Class Responsible for Testing: Dipl.-Ing. (FH) A. Schäfer Date: 17th July 2006 Address: Fraunhofer-Institute
PART 2 THERMAL RESPONSE. DIF SEK Part 2: Thermal Response 0/ 44
DIF SEK PART 2 THERMAL RESPONSE DIF SEK Part 2: Thermal Response 0/ 44 Resistance to fire - Chain of events Θ Loads 1: Ignition Steel columns time 2: Thermal action 3: Mechanical actions R 4: Thermal response
EN 10211:2007 validation of Therm 7.4. Therm 7.4 validation according to EN ISO 10211:2007
Therm 7.4 validation according to EN ISO 10211:2007 Therm 7.4 validation according to NBN EN ISO 10211:2007 General considerations and requirements for validation of calculation methods according to NBN
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61788-6 First edition 2000-12 Superconductivity Part 6: Mechanical properties measurement Room temperature tensile test of Cu/Nb-Ti composite superconductors Supraconductivité
TCET110.(G) up to TCET4100. Optocoupler with Phototransistor Output. Vishay Telefunken. Description. Applications. VDE Standards
Optocoupler with Phototransistor Output Description The TCET11./ TCET2/ TCET4 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead up to 16-lead plastic
Evidence of Performance Thermal transmittance
Evidence of Performance Thermal transmittance Test Report 10-001988-PR02 (PB-H01-06-en-01) Client Mályi-Glass Kft. Pesti ut 7 3434 Mályi Hungary Product Insulating glass unit System designation Variants
PART 5-1: Compartment fire
PART 5-1: Compartment fire P. Schaumann T. Trautmann University of Hannover Germany J. Žižka Czech Technical University in Prague Czech Republic 1 TASK The gas temperature of a fully engulfed fire in an
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
TCLT10.. Series. Optocoupler with Phototransistor Output. Vishay Semiconductors. Description. Applications. VDE Standards
Optocoupler with Phototransistor Output Description The TCLT1.. Series consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4-lead SO6L package. The elements
Universal limit switches
SWITCHES.CROUZET.COM 1 LIMIT SWITCHES 0/016 Universal limit switches 8384 standard 8384 with positive break operation Conformity to standards IEC / EN 60947--1, including Annex K for version with positive
A fire resistance assessment case history G.C. and M.E. Giuliani
A fire resistance assessment case history G.C. and M.E. Giuliani In general A structure subjected to fire must be safe for the time necessary for the escape of the people and for the safe operation of
TREES Training for Renovated Energy Efficient Social housing
TREES Training for Renovated Energy Efficient Social housing Intelligent Energy -Europe programme, contract n EIE/05/110/SI2.420021 Section 2 Tools 2.1 Simplified heating load calculation Tamas CSOKNYAI
tel.: , fax: , mobile:
EFFECTIVENESS IS OUR GOAL. In order to achieve that, we have developed an entire range of photoluminescent products, of various parameters and applications, serving for the effective marking of evacuation
Industrial Generator Set Accessories
Industrial Generator Set Accessories Sound Enclosures KD/KM/KV Models Measuring Sound Level General Information Sound Pressure (LpA) and Sound Power (LwA) The unit of measurement for sound level is the
Chemical Permeation & Penetration Test Database
Lakeland Chemical Protective Clothing Chemical Permeation & Penetration Test Database Table of currently available permeation/penetration test data on ChemMax 1,2,3 and 4, Interceptor and Pyrolon CRFR,
TEST REPORT No. : XMML Date : Jan.06, 2012 Page: 1 of 12
Page: 1 of 12 KINGKONREE INTERNATIONAL CHINA SURFACE INDUSTRIAL CO., LTD 1213-1255/12F, DONGMING BLD., MINZHI DADAO, BAOAN DISTRICT, SHENZHEN P.R. CHINA The following sample(s) was/ were submitted and
Industrial Generator Set Accessories
Industrial Generator Set Accessories Sound Enclosures KD/KM/KV Models General Information Measuring Sound Level The unit of measurement for sound level is the decibel (db) that is calculated using the
Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
SFH615A / SFH6156. Pb Pb-free. Optocoupler, High Reliability, 5300 V RMS VISHAY. Vishay Semiconductors
SFH6A / SFH66 Optocoupler, High Reliability, 300 V RMS Features Excellent CTR Linearity Depending on Forward Current Isolation Test Voltage, 300 V RMS Fast Switching Times Low CTR Degradation Low Coupling
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK SUBJECT CODE: EC 1354 SUB.NAME : VLSI DESIGN YEAR / SEMESTER: III / VI UNIT I MOS TRANSISTOR THEORY AND
3M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails
Evaluation of conformity criteria for reinforcing steel properties
IASSAR Safety, Reliability, Risk, Resilience and Sustainability of Structures and Infrastructure 12th Int. Conf. on Structural Safety and Reliability, Vienna, Austria, 6 10 August 2017 Christian Bucher,
Yalıtım Kontrol Koruma. Insulation Control Protection
Yalıtım Kontrol Koruma Insulation Control Protection Tunex 17/8 ISO 10140-3 Darbe Sesi İndirgeme (Impact Sound Insulation) Test Raporu page 1 of 15 Customer : DKM INSAAT TAAHHUT VE DANISMANLIK PAZARLAMA
Dimethyl ether (DME) for fuels Determination of impurities Gas chromatographic method
INTERNATIONAL STANDARD ISO 17196 First edition 2014-11-15 Dimethyl ether (DME) for fuels Determination of impurities Gas chromatographic method Diméthylether (DME) pour carburants et combustibles Détermination
Laboratory for Acoustics. Determination of the sound insulation of sliding door constructions, manufactured by Metaflex
Laboratory for Acoustics Determination of the sound insulation of sliding door constructions, manufactured by Metaflex Report number A 2641-1E-RA-002 d.d. January 26, 2015 Laboratory for Acoustics Determination
CIRCO. Sound-attenuating transfer unit QUICK FACTS
Sound-attenuating transfer unit QUICK FACTS Supplied in pairs For the transfer of air through a wall Fits in a circular cut opening Simple to install Mounting frame integrated into the transfer diffuser
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NP series I P N = 4, 6, 12, 15 A Ref: HO 4-NP, HO 6-NP, HO 12-NP, HO 15-NP For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NSM series I PN = 8, 15, 25 A Ref: HO 8-NSM, HO 15-NSM, HO 25-NSM For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NP/SP33 series I PN = 8, 15, 25 A Ref: HO 8-NP/SP33, HO 15-NP/SP33, HO 25-NP/SP33 For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the
SCREEN LOW E SATINÉ 5500 LOW E
SCREEN LOW E SATINÉ 5500 LOW E SCREEN LOW E INTELLIGENT FABRICS FOR SOLAR PROTECTION COLLECTION 2018 2021 INTERNAL APPLICATION www.sunscreen-mermet.com THERMAL SHIELD FOR INTERNAL BLINDS 78% OF SOLAR REFLECTANCE
LOW E SATINÉ 5500 LOW E
SCREEN LOW E INTELLIGENT FABRICS FOR SOLAR PROTECTION Width: 240 cm www.mermet.co.uk LOW E THERMAL SHIELD FOR INTERNAL BLINDS 76% OF SOLAR REFLECTANCE 17% EMISSIVITY for thermal comfort all year round
COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING
COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING COURSE: MCE 524 DISCLAIMER The contents of this document are intended for practice and leaning purposes at the
3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
On the declaration of the measurement uncertainty of airborne sound insulation of noise barriers
On the declaration of the measurement uncertainty of airborne sound insulation of noise barriers Massimo Garai and Paolo Guidorzi 2,2 University of Bologna - DIN Viale Risorgimento 2, 036 Bologna, Italy
E C t y p e - e x a m i n a t i o n C e r t i f i c a t e
E C t y p e - e x a m i n a t i o n C e r t i f i c a t e Page 1 of 1 Issued by Manufacturer NMi Certin B.V., designated and notified by the Netherlands to perform tasks with respect to conformity modules
Determination of thermal transmittance of window (test title)
INSTITUTE OF ARCHITECTURE AND CONSTRUCTION OF KAUNAS UNIVERSITY OF TECHNOLOGY SCIENCE LABORATORY OF BUILDING THERMAL PHYSICS Notified Body number: 2018 BANDYMAI ISO/IEC 17025 Nr. LA. 01.031 page (pages)
A RANK-INVARIANT METHOD OF LINEAR AND POLYNOMIAL REGRESSION ANALYSIS. lp) H. THEIL
MATHEMA TICS A RANK-INVARIANT METHOD OF LINEAR AND POLYNOMIAL REGRESSION ANALYSIS lp) BY H. THEIL (Communicated by Prof. D. VAN DANTZIG at the meeting of March 25, 1950) 2. CONFIDENCE REGIONS FOR THE PARAMETERS
STANDARDISED MOUNTINGS
STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low
DC/DC regulator Input V Output up to 16 A
PMC 4000 series Contents Product Program...................... 2 Mechanical Data...................... 3 Connections......................... 3 Absolute Maximum Ratings............. 4 Input...............................
IT-AP INFORMATION REGARDING THE CE MARK
IT-AP-20120420 INFORMATION REGARDING THE CE MARK MORE INFORMATION REGARDING THE CE MARK Given the difficulty experienced in interpreting some of the results of the different tests conducted in order to
Get Discount Coupons for your Coaching institute and FREE Study Material at Force System
Get Discount Coupons for your Coaching institute and FEE Study Material at www.pickmycoaching.com Mechanics Force System When a member of forces simultaneously acting on the body, it is known as force
Materials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 189-009-613R491 0.01600 Environment
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
FUNDAMENTALS OF HVAC
FUNDAMENTALS OF HVAC Prof.Dr. Yusuf Ali KARA Res.Asst. Semih AKIN 1 INTRODUCTION Terminology: HVAC: Heating, ventilating, air-conditioning and refrigerating. Air conditioning is the process of treating
Job No. Sheet No. Rev. CONSULTING Engineering Calculation Sheet. Member Design - Steel Composite Beam XX 22/09/2016
CONSULTING Engineering Calculation Sheet jxxx 1 Member Design - Steel Composite Beam XX Introduction Chd. 1 Grade 50 more common than Grade 43 because composite beam stiffness often 3 to 4 times non composite
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-10 First edition 2001-05 Power transformers Part 10: Determination of sound levels Transformateurs de puissance Partie 10: Détermination des niveaux de bruit IEC 2001 Copyright
ISO INTERNATIONAL STANDARD. Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: Simplified method
INTERNATIONAL STANDARD ISO 10077-1 First edition 2000-07-15 Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 1: Simplified method Performance thermique des fenêtres,
ANSI/AHRI Standard (Formerly ARI Standard ) 2006 Standard for Performance Rating of Desuperheater/Water Heaters
ANSI/AHRI Standard 470-2006 (Formerly ARI Standard 470-2006) 2006 Standard for Performance Rating of Desuperheater/Water Heaters IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does
Non-destructive testing of steel forgings- Part 1: Magnetic particle inspection (BS EN :1999)
Non-destructive testing of steel forgings- Part 1: Magnetic particle inspection (BS EN 10228-1:1999) 1 Scope This part of EN 10228 describes the method and acceptance criteria to be used for the magnetic
Determination of particle size distribution Single particle light interaction methods. Part 4:
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 21501-4 Second edition 2018-05 Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne
Security Boss Manufacturing LLC MAXSEAL Pet Doors
Security Boss Manufacturing LLC MAXSEAL Pet Doors The MaxSeal Pet Door Program is for customers and installers wanting the best pet door product in their homes. The MaxSeal door by Security Boss Manufacturing
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 140-6 Second edition 1998-08-15 Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of
European Standard Environmental Engineering (EE); Acoustic noise emitted by telecommunications equipment
EN 300 753 V1.3.1 (2012-01) European Standard Environmental Engineering (EE); Acoustic noise emitted by telecommunications equipment 2 EN 300 753 V1.3.1 (2012-01) Reference REN/EE-00025 Keywords acoustic,
LOW E SATINÉ 5500 LOW E
SCREEN LOW E INTELLIGENT FABRICS FOR SOLAR PROTECTION COLLECTION 2015 2018 Width: 240 cm www.sunscreen-mermet.com LOW E THERMAL SHIELD FOR INTERNAL BLINDS 78% OF SOLAR REFLECTANCE 15% EMISSIVITY for thermal
The Multislope Model. A new description for the fatigue strength of glass fibre reinforced plastic. G.K. Boerstra
The Multislope Model A new description for the fatigue strength of glass fibre reinforced plastic G.K. Boerstra Date: 10-02-2006 Document nr: D0003303 1 Introduction For the life time calculations of structures
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
ELINEMK Technical Characteristics Rated Current Busbar Code Standards Rated Isolation Voltage Max. Rated Operational Voltage Rated Frequency Pollution Degree Protection Degree External Mechanical Impacts
RELIABILITY ASSESSMENT OF EXISTING STRUCTURES
1. Introduction RELIABILITY ASSESSMENT OF EXISTING STRUCTURES EN Eurocodes, presently being implemented into the system of national standards nearly in the whole Europe, are particularly intended for the
Thermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
Thermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
Turbines and turbine sets Measurement of emitted airborne noise Engineering/survey method
INTERNATIONAL STANDARD ISO 10494 Second edition 2018-04 Turbines and turbine sets Measurement of emitted airborne noise Engineering/survey method Turbines et groupes de turbines Mesurage du bruit aérien
Load Cell Approval Field and Laboratory Evaluation Manual
Load Cell Approval Field and Laboratory Evaluation Category: MASS Revision: c Page: 1 of 9 In 2011 Measurement Canada began phasing in requirements for using approved load cells in selected Heavy Capacity
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Laboratory for Fire Safety
Laboratory for Fire Safety Classification of the fire resistance in accordance with EN 13501-2:2016 of a wooden floor construction made of SINH Board Classification report Report number YA 1891-2E-RA d.d.
Collector test according to EN ,2:2006
Test Report: KTB Nr. 2007-41-en Collector test according to EN 12975-1,2:2006 for: SOLAR ENERGY,LTD, Brand name: SCM-Series Responsible for testing: Dipl.-Ing. (FH) K. Kramer Date: 26th October 2007 Address:
USING NON-DESTRUCTIVE METHODS TO OBTAIN THE STRENGTH OF CONCRETE SAMPLES
Journal of Young Scientist, Volume I, 2013 ISSN 2344-1283; ISSN CD-ROM 2344-1291; ISSN Online 2344-1305; ISSN-L 2344 1283 USING NON-DESTRUCTIVE METHODS TO OBTAIN THE STRENGTH OF CONCRETE SAMPLES Catalin
Single point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
EXPERIMENTAL VERIFICATION OF THE EUROPEAN METHODOLOGY FOR TESTING NOISE BARRIERS IN SITU: SOUND REFLECTION
000059.doc/0 EXPERIMENTAL VERIFICATION OF THE EUROPEAN METHODOLOGY FOR TESTING NOISE BARRIERS IN SITU: SOUND REFLECTION M. GARAI, P. GUIDORZI DIENCA, University of Bologna, Viale Risorgimento 2, 40136,
SFH615A/SFH6156. Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS. Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 300 V RMS Features Excellent CTR Linearity Depending on Forward Current Isolation Test Voltage, 300 V RMS e3 Fast Switching Times Low CTR Degradation
Comparison of crash tests and simulations for various vehicle restraint systems
Comparison of crash tests and simulations for various vehicle restraint systems C. Goubel ab, E. Di Pasquale c, M. Massenzio a, S. Ronel a a : Université de Lyon, F 69622, Lyon, France ; INRETS, UMR_T946,
Determining of Thermal Conductivity Coefficient of Pressed Straw (Name of test)
CONSTRUCTION HEAT PHYSICS LABORATORY INSTITUTE OF ARCHITECTURE AND CONSTRUCTION OF KAUNAS UNIVERSITY Test and calculation carried out according to: Product: 12 December 2012 LITHUANIAN NATIONAL ACCREDITATION
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12828-2 First edition 2016-12-15 Validation methods for fire gas analyses Part 2: Intralaboratory validation of quantification methods Méthode de validation des analyses de gaz
GUIDELINE FOR HAND HELD SHEAR VANE TEST
GUIDELINE FOR HAND HELD SHEAR VANE TEST NZ GEOTECHNICAL SOCIETY INC August 2001 CONTENTS Page 1.0 Introduction 2 2.0 Background 2 3.0 Recommended Practice 3 4.0 Undrained Shear Strength 3 5.0 Particular
L 305/8 Official Journal of the European Union (Acts whose publication is not obligatory) COMMISSION
L 305/8 Official Journal of the European Union 4.11.2006 II (Acts whose publication is not obligatory) COMMISSION COMMISSION DECISION of 27 October 2006 amending Decision 2000/147/EC implementing Council
Test Report. No. NGBHG Date: 21 Nov Page 1 of 10.
Test Report No NGBHG1403621002 Date: 21 Nov 2014 Page 1 of 10 EXOCOM 28 CHEMIN SAINT-MARTIN,VITRY SUR SEINE,FRANCE,94400 The following sample(s) was/were submitted and identified on behalf of the clients
3M MetPak CP2 Press-Fit Header 2 mm Type C, 55 Signal Contacts, Left Guidance CP2 Series
M MetPak CP2 Press-Fit Header 25 mm basic system unit CompactPCI combines the benefits of PCI desktop architecture with the ruggedness of the U and 6U IEEE Eurocard form factor popularized by the VME bus
Overhead lines. 110 kv wood tower with guy wires
Overhead lines a) ja b) 0 kv wood poles c) free standing 0 kv metal tower with I-strings d) free standing 440 kv metal tower with V-strings e) 400 kv metal tower with guy wires 0 kv wood tower with guy
Cree XLamp XP-L LEDs. Table of Contents. CLD-DS97 Rev 3C. Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 3C XP-L High Density LED XP-L High Intensity LED Product Description FEATURES Table of Contents www.cree.com/xlamp XLamp XP-L LEDs are available
REACH. Federation of Hong Kong Industries 17 th January, Heribert Bürgy Chemical Division Market Control and Advice
Federal Department of Home Affairs FDHA Federal Office of Public Health FOPH Consumer Protection Directorate Federation of Hong Kong Industries 17 th January, 2008 Chemical Division Market Control and
RoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
The Experimental Determination of the Maximum Continuous Operating Voltage for a ZnO Based Varistor
ANALELE UNIVERSITĂŢII EFTIMIE MURGU REŞIŢA ANUL XII, NR. 1, 2005, ISSN 1453-7394 ZENG Eva, POPA Cristian Mihai The Experimental Determination of the Maximum Continuous Operating Voltage for a ZnO Based