Noise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC

Transcription

1 Power Choke Coil for Automotive application : PCC-M3M (MC) PCC-MM (MC) PCC-M63M (MC) PCC-M6M (MC) PCC-M7M (MC) PCC-M7M (MC) PCC-M8M (MC) PCC-M8M (MC) PCC-M1M (MC) PCC-M1M (MC) PCC-M1ML (MC) PCC-M16ML (MC) igh heat resistance and high reliability Using metal composite core (MC) Industrial Property : patents 1 (Registered /Pending 19) Features igh heat resistance : Operation up to 1 C including self-heating igh-reliability : igh vibration resistance as result of newly developed integral construction; under severe reliability conditions of automotive and other strenuous applications igh bias current : Excellent inductance stability using ferrous alloy magnetic material (Fig.1) Temp. stability : Excellent inductance stability over broad temp. range (Fig.1) Low audible (buzz) noise : New metal composite core technology igh efficiency : Low RDC of winding and low eddy-current loss of the core Shielded construction AEC-Q Automotive qualified RoS compliant Fig.1 Inductance v.s. DC current, Temp ETQPM7YFM(reference) C 1 C 1 C 1 C Recommended Applications Noise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC Standard Packing Quantity (Minimum Quantity/Packing Unit) 1, pcs./box ( reel) : PCC- M6M, M7M, M7M, M8M, M8M, M1M, M1M, M1ML, M16ML, pcs./box ( reel) : PCC-M3M, MM, M63M Explanation of Part Numbers 1 E T 3 Q P M Y F Product Code Classification eight Winding Inductance Core Suffix Size R7.7 µ µ 1 µ P N M K C mm size 6 mm size 7 mm size 8 mm size 1 mm size Temperature rating Operating temperature range After PWB mounting Storage condition Before PWB mounting Tc : - C to +1 C(Including self-temperature rise) Ta : - C to +3 C 8%R max. Dec. 17

2 1. PCC-M3M/PCC-MM (ETQP3M YFP/ETQPM YFP) Standard Parts. PCC-M3M [.. 3.(mm)] PCC-MM [...(mm)] Inductance vs DC Current ETQP3MRYFP Inductance 1 DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= 3% (µ) (%) (max.) (%) ( ) ( 3) ( ) ETQP3MRYFP..6 (.8) ETQP3M3R3YFP (3.) ± ±1 ETQPMR7YFP (39.6) ETQPMYFP 163 (179) ( 1) Measured at 1 kz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR) and measured at room temperature. See also ( ) ( 3) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: eat radiation constant are approx. K/W measured on.. 3. mm case size and approx. 8 K/W measured on... mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop 3 %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +1 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Ref er ence). ETQP3M3R3YFP ETQPMR7YFP ETQPMYFP Case Temperature vs DC Current : Four-layer PWB (1.6 mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQP3MRYFP ETQPMR7YFP ETQP3M3R3YFP ETQPMYFP Dec. 17

3 . PCC-M63M/PCC-M6M (ETQP3M YFN/ETQPM YFN) Standard Parts PCC-M63M [ (mm)] PCC-M6M [6. 6..(mm)] Inductance 1 DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= 3% (µ) (%) (max.) (%) ( ) ( 3) ( ) ETQP3MR68YFN (6.9) ETQP3M1RYFN (8.7) ETQPM6R8YFN (3.) ETQPM1YFN 1 ±. (9.6) ± ETQPMYFN 16(138.6) ETQPM33YFN 33 17(189.)...1 ETQPM7YFN 7 1 (31) ( 1) Measured at 1 kz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR) and measured at room temperature. See also ( ) ( 3) DC current which causes temperature rise of K. Partsare soldered by reflow on multilayer PWB with high heat dissipation performance. Note: eat radiation constant are approx. K/W measured on mm case size and approx. 37 K/W measured on mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop 3 %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +1 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Ref er ence) Inductance vs DC Current ETQP3MR68YFN ETQP3M1RYFN 1 1 ETQPM6R8YFN ETQPM1YFN ETQPMYFN ETQPM3YFN ETQPM7YFN Dec. 17

4 Case Temperature vs DC Current : Four-layer PWB (1.6 mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQP3MR68YFN ETQP3M1RYFN ETQPM6R8YFN ETQPM1YFN ETQPMYFN ETQPM3YFN ETQPM7YFN Dec. 17

5 3. PCC-M7M/PCC-M7M (ETQPM YFM/ETQPM YGM) Standard Parts PCC-M7M [7. 7..(mm)] Inductance 1 DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= 3% (µ) (%) (max.) (%) ( ) ( 3) ( ) ETQPMR7YFM.7 (3) ETQPM6R8YFM (9.) ETQPM1YFM (1.3) ETQPMYFM ± 9(1) ± ETQPM33YFM 33 1(13) ETQPM7YFM 8 16(17) PCC-M7M [7. 7..(mm)] ETQPMYGM 9 38(38.8) ( 1) Measured at 1 kz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR) and measured at room temperature. See also ( ) ( 3) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: eat radiation constant is approx. 31 K/W measured on mm case size and approx. 9 K/W measured on mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop 3 %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +1 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Ref er ence) Inductance vs DC Current ETQPMR7YFM ETQPM6R8YFM ETQPM1YFM ETQPMYFM ETQPM33YFM ETQPM7YFM ETQPMYGM Dec. 17

6 Case Temperature vs DC Current : Four-layer PWB (1.6 mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQPMR7YFM ETQPM6R8YFM ETQPM1YFM ETQPMYFM 1 3 ETQPM33YFM ETQPM7YFM ETQPMYGM Dec. 17

7 . PCC-M8M/PCC-M8M (ETQPM YFK/ETQPM YGK) Standard Parts PCC-M8M [8. 8..(mm)] Inductance 1 DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= 3% (µ) (%) (max.) (%) ( ) ( 3) ( ) ETQPMRYFK. 7.6(8.) ETQPM1YFK 1 33(37) ETQPM1YFK 1 8.(3.1) ETQPMYFK ± 63(7) ± ETQPM7YFK 8 1(138) PCC-M8M ETQPMYGK 1 3(333) [8. 8..(mm)] ( 1) Measured at 1 kz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR) and measured at room temperature. See also ( ) ( 3) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: eat radiation constant are approx. 7 K/W measured on mm case size and approx. 9 K/W measured on mm case size. See also ( ) ( ) Saturation rated current : DC current which causes L() drop 3 %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + 1 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Ref er ence) Inductance vs DC Current Inductance (μ) ETQPMRYFK ETQPM1YFK ETQPMYFK ETQPM7YFK ETQPM1YFK ETQPMYGK Case Temperature vs DC Current : Four-layer PWB (1.6 mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQPMRYFK ETQPMYFK ETQPM1YFK ETQPM7YFK ETQPM1YFK ETQPMYGK Dec. 17

8 . PCC-M1M/PCC-M1M (ETQPM YFC/ETQPM YGC) Standard Parts PCC-M1M [ (mm)] PCC-M1M ETQPMYGC 97 8(9) [ (mm)] ( 1) Measured at 1 kz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR) and measured at room temperature. See also ( ) ( 3) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: eat radiation constant are approx. 3 K/W measured on mm case size and approx. 6 K/W measured on mm case size. See also ( ) ( ) Saturation rated current : Dc current which causes L() drop 3 %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +1 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Ref er ence) Inductance vs DC Current ETQPM1RYFC ETQPMRYFC ETQPMR7YFC ETQPM1YFC ETQPMYFC 1 ETQPM33YFC ETQPM68YFC Inductance 1 DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= 3% (µ) (%) (max.) (%) ( ) ( 3) ( ) ETQPM1RYFC (.) ETQPMRYFC..3(.9) ETQPM3R3YFC (7.9) ETQPMR7YFC.7 1.(.3) ETQPM1YFC 1 3.8(6.) ETQPMYFC ± () ± ETQPM33YFC (7.) ETQPM7YFC 7 99(18.9) ETQPM68YFC (19.6) ETQPMYGC ETQPM3R3YFC ETQPM7YFC Dec. 17

9 Case Temperature vs DC Current : Four-layer PWB (1.6 mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQPM1RYFC ETQPMRYFC ETQPM3R3YFC ETQPMR7YFC ETQPM1YFC ETQPMYFC ETQPM33YFC ETQPMYGC ETQPM7YFC ETQPM68YFC 1 3 Dec. 17

10 6. PCC-M1ML/PCC-M16ML (ETQPM YLC/ETQP6M YLC) Standard Parts PCC-M1ML [ (mm)] PCC-M16ML [ (mm)] Inductance 1 DCR (at C) (mω) Rated Current (Typ. : A) Part No. L Tolerance Typ. Tolerance T=K L= 3% (µ) (%) (max.) (%) ( ) ( 3) ( ) ETQPMR33YLC (1.1) ETQPMR68YLC (1.93) ETQPM1RYLC 1..3(.3) ETQPMRYLC. ±.6(.6) ± ETQP6M1RYLC 1. 3.(3.) ETQP6MRYLC..(.) ETQP6M3R3YLC (6.6) ETQP6MR7YLC.7 8.7(9.7) ( 1) Measured at 1 kz. ( ) DC current which causes temperature rise of K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR) and measured at room temperature. See also ( ) ( 3) DC current which causes temperature rise of K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: eat radiation constant are approx. 3 K/W measured on mm case size and approx. 3 K/W measured on mm case size. See also ( ) ( ) Saturation rated current : Dc current which causes L() drop 3 %. ( ) Within a suitable application, the part s temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +1 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Ref er ence) Inductance vs DC Current ETQPMR33YLC ETQPMR68YLC ETQPM1RYLC. ETQPMRYLC ETQP6M1RYLC ETQP6MRYLC ETQP6M3R3YLC ETQP6MR7YLC Dec. 17

11 Case Temperature vs DC Current : Four-layer PWB (1.6 mm FR), See also ( ) : Multilayer PWB with high heat dissipation performance. See also ( 3) ETQPMR33YLC ETQPMR68YLC ETQPM1RYLC ETQPMRYLC ETQP6M1RYLC ETQP6MRYLC ETQP6M3R3YLC ETQP6MR7YLC 1 1 Dec. 17

12 Dimensions in mm (not to scale) Dimensional tolerance unless noted : ±. PCC-M3M PCC-MM (ETQP3M YFP/ETQPM YFP) PCC-M63M PCC-M6M (ETQP3M YFN/ETQPM YFN) Inductance Suffix.±. Inductance Suffix 6.±. Date Code Polarity Inductance Suffix 7.±. Inductance Suffix 8.±. 7.±. 3.±.3 8.±. 3.±.3 Date Code Polarity.. Date Code Polarity...1 min..1 min. Inductance Suffix 1.7±. Inductance Suffix 1.9±.6 1.±..±.3 1.±. 7.3±.3.±. 3.±.3 6.±. 3.± Date Code Polarity min. M3M MM 3. max.. max..1 min. M63M M6M 3. max.. max. PCC-M7M PCC-M7M (ETQPM YFM/YGM) PCC-M8M PCC-M8M (ETQPM YFK/YGK) M7M M7M. max.. max. M8M M8M. max.. max. PCC-M1M PCC-M1M (ETQPM YFC/YGC) PCC-M1ML PCC-M16ML (ETQPM YLC/ETQP6M YLC) Date Code Polarity.. Date Code Polarity min. M1M M1M. max.. max.. min. M1ML M16ML. max. 6. max. Dec. 17

13 Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : ±. PCC-M3M PCC-MM (ETQP3M YFP/ETQPM YFP) PCC-M63M PCC-M6M (ETQP3M YFN/ETQPM YFN) PCC-M7M PCC-M7M (ETQPM YFM/YGM) Don't wire on the pattern on shaded portion the PWB The same as the left The same as the left. PCC-M8M PCC-M8M (ETQPM YFK/YGK) PCC-M1M PCC-M1M (ETQPM YFC/YGC) PCC-M1ML PCC-M16ML (ETQPM YLC/ETQP6M YLC) Don't wire on the pattern on shaded portion the PWB The same as the left The same as the left. As for Soldering Conditions and Safety Precautions (Power Choke Coils for Automotive application), Please see Data Files Dec. 17

14 Packaging Methods (Taping) Embossed Carrier Tape Dimensions in mm (not to scale) fd P P A B F E t1 t W P1 Tape running direction A B W E F P1 P P fd t1 t PCC-M3M PCC-MM.3 PCC-M63M PCC-M6M PCC-M7M/M7M PCC-M8M/M8M PCC-M1M/M1M PCC-M1ML/M16ML Taping Reel Dimensions in mm (not to scale) E C B A D W Standard Reel Dimensions A B C D E W PCC-M3M/MM PCC-M63M/M6M PCC-M7M/M7M 17. PCC-M8M/M8M PCC-M1M/M1M PCC-M1ML/M16ML. Component Placement (Taping) M63M/M6M M7M/M7M M8M/M8M M3M/MM M1M/M1M M1ML/M16ML Terminal Terminal Standard Packing Quantity/Reel Part No. Minimum Quantity / Packing Unit Quantity per reel PCC-M3M ETQP3M YFP PCC-MM ETQPM YFP, pcs. / box ( reel) 1, pcs. PCC-M63M ETQP3M YFN PCC-M6M ETQPM YFN PCC-M7M ETQPM YFM PCC-M7M ETQPM YGM PCC-M8M ETQPM YFK PCC-M8M ETQPM YGK 1, pcs. / box ( reel) pcs. PCC-M1M ETQPM YFC PCC-M1M ETQPM YGC PCC-M1ML ETQPM YLC PCC-M16ML ETQP6M YLC Dec. 17