ZNR Transient/Surge Absorbers (Type E)
|
|
- Emmeline Grant
- 5 years ago
- Views:
Transcription
1 ZNR Transient/Surge Absorbers Type : E The ZNR Type E is capable of handling larger surge energy than Type D in applications to protect electronic equipment or semiconductor devices from switching and induced lightning surges. Features UL and CSA recognized components Very large surge withstanding capability with a compact size Direct mounting on boards like a power distribution board available Fast response to steep impulse voltage Low clamping voltage for better surge protection RoHS compliant Recommended Applications Transistor, diode, IC, thyristor or triac semiconductor protection Surge protection in industrial power plant operations Relay or electromagnetic valve surge absorption Surge absorption applications in broadcasting, communications devices, traffic/railroad, agricultural facilities, waterworks Surge protection of automatic control devices for power distribution line Related Standards Standard No. UL19 CSA C. No.1 Class 1 01 Title Surge Protective Devices Accessories and Parts for Electronic Products ( for Across-The-Line use as transient protection on V ac nominal system) Each type designation is not registered by Part Num ber. Note : Ask our factory for Product Specifi cation before use. As for Handling Precautions and Minimum Quantity / Packing Unit Please see Related Information Explanation of Part Numbers 1 E R Z C E K Product Code Element Size Type Tolerance Nominal Design No. Dimensions in mm (not to scale) Y General UL/CSA Recognized ISO M L W (Unit : mm) W H L ERZC0EK (Y) ±1 ±1 39±1 ERZC3EK (Y) ±1 55±1 51±1 H ZNR Date code 1 Nov. 01
2 0 Series (UL and CSA Recognized) Ratings and Characteristics(ERZC0EK) (UL/CSA Recognized) Type Designation ( ms) (/0 μs) (UL/CSA) 1 time 1 time V 1 ma (V) ACrms (V) DC (V) V A (V) (J) (A) ACrms (V) ERZC0EK01Y 0EK01U 00 (15 to 5) ERZC0EK1Y 0EK1U (1 to ) ERZC0EK71Y 0EK71U 70 (7 to 303) ERZC0EK31Y 0EK31U 3 (3 to 39) ERZC0EK391Y 0EK391U 390 (351 to 9) ERZC0EK31Y 0EK31U 30 (37 to 73) ERZC0EK71Y 0EK71U 70 (3 to 517) ERZC0EK511Y 0EK511U 5 (59 to 51) ERZC0EK1Y 0EK1U (55 to ) ERZC0EK1Y 0EK1U (1 to 7) ERZC0EK751Y 0EK751U 750 (75 to 5) ERZC0EK71Y 0EK71U 7 (70 to 5) ERZC0EK1Y 0EK1U (73 to 90) ERZC0EK911Y 0EK911U 9 (19 to 1) ERZC0EKY 0EKU ( to 1) ERZC0EK11Y 0EK11U 1 (990 to 1) Series (UL and CSA Recognized) Ratings and Characteristics(ERZC3EK) (UL/CSA Recognized) Type Designation ( ms) (/0 μs) (UL/CSA) 1 time 1 time V 1 ma (V) ACrms (V) DC (V) V A (V) (J) (A) ACrms (V) ERZC3EK01Y 3EK01U 00 (15 to 5) ERZC3EK1Y 3EK1U (1 to ) ERZC3EK71Y 3EK71U 70 (7 to 303) ERZC3EK31Y 3EK31U 3 (3 to 39) ERZC3EK391Y 3EK391U 390 (351 to 9) ERZC3EK31Y 3EK31U 30 (37 to 73) ERZC3EK71Y 3EK71U 70 (3 to 517) ERZC3EK511Y 3EK511U 5 (59 to 51) ERZC3EK1Y 3EK1U (55 to ) ERZC3EK1Y 3EK1U (1 to 7) ERZC3EK751Y 3EK751U 750 (75 to 5) ERZC3EK71Y 3EK71U 7 (70 to 5) ERZC3EK1Y 3EK1U (73 to 90) ERZC3EK911Y 3EK911U 9 (19 to 1) ERZC3EKY 3EKU ( to 1) ERZC3EK11Y 3EK11U 1 (990 to 1) Nov. 01
3 0 Series Ratings and Characteristics(ERZC0EK) Power ( ms) (/0 μs) Typical Capacitance (Reference) 1 time times V 1 ma (V) ACrms (V) DC (V) V A (V) (W) (J) (A) (A) at 1kHz (pf) ERZC0EK01 00 (15 to 5) ERZC0EK1 (1 to ) ERZC0EK71 70 (7 to 303) ERZC0EK31 3 (3 to 39) ERZC0EK (351 to 9) ERZC0EK31 30 (37 to 73) ERZC0EK71 70 (3 to 517) ERZC0EK511 5 (59 to 51) ERZC0EK1 (55 to ) ERZC0EK1 (1 to 7) ERZC0EK (75 to 5) ERZC0EK71 7 (70 to 5) ERZC0EK1 (73 to 90) ERZC0EK911 9 (19 to 1) ERZC0EK ( to 1) ERZC0EK11 1 (990 to 1) Series Ratings and Characteristics(ERZC3EK) Power ( ms) (/0 μs) Typical Capacitance (Reference) 1 time times V 1 ma (V) ACrms (V) DC (V) V 00 A (V) (W) (J) (A) (A) at 1kHz (pf) ERZC3EK01 00 (15 to 5) ERZC3EK1 (1 to ) ERZC3EK71 70 (7 to 303) ERZC3EK31 3 (3 to 39) ERZC3EK (351 to 9) ERZC3EK31 30 (37 to 73) ERZC3EK71 70 (3 to 517) ERZC3EK511 5 (59 to 51) ERZC3EK1 (55 to ) ERZC3EK1 (1 to 7) ERZC3EK (75 to 5) ERZC3EK71 7 (70 to 5) ERZC3EK1 (73 to 90) ERZC3EK911 9 (19 to 1) ERZC3EK ( to 1) ERZC3EK11 1 (990 to 1) Nov. 01
4 Typical Characteristics(Type E) vs. Current (ERZC0EK01(Y) to ERZC0EK511(Y)) 000 Max. (ERZC0EK1(Y) to ERZC0EK11(Y)) (V) (V) 00 ERZC0EK391(Y) ERZC0EK31(Y) ERZC0EK71(Y) ERZC0EK511(Y) ERZC0EK31(Y) ERZC0EK1(Y) ERZC0EK01(Y) ERZC0EK71(Y) ERZC0EK511(Y) ERZC0EK71(Y) ERZC0EK31(Y) ERZC0EK391(Y) ERZC0EK31(Y) ERZC0EK71(Y) ERZC0EK1(Y) ERZC0EK01(Y) to A: /0 μs ERZC0EK1(Y) ERZC0EK71(Y) ERZC0EK751(Y) ERZC0EK1(Y) ERZC0EK11(Y) ERZC0EK(Y) ERZC0EK911(Y) ERZC0EK1(Y) Max. ERZC0EK11(Y) ERZC0EK(Y) ERZC0EK911(Y) ERZC0EK1(Y) ERZC0EK71(Y) ERZC0EK751(Y) ERZC0EK1(Y) ERZC0EK1(Y) -1 to A: /0 μs Impulse Derating Curve (Relation be tween impulse width and surge, repetitively) 0 Series (ERZC0EK01(Y) to ERZC0EK71(Y)) times : 5 minutes to times : minutes 0 Series (ERZC0EK31(Y) to ERZC0EK1(Y)) times : 5 minutes to times : minutes 0 Series (ERZC0EK751(Y) to ERZC0EK11(Y)) times : 5 minutes to times : minutes Impulse Times Times Impulse Times Times Impulse Times Times Nov. 01
5 Typical Characteristics(Type E) vs. Current (ERZC3EK01(Y) to ERZC3EK511(Y)) (V) ERZC3EK71(Y) ERZC3EK31(Y) ERZC3EK391(Y) ERZC3EK511(Y) ERZC3EK31(Y) ERZC3EK71(Y) ERZC3EK1(Y) ERZC3EK01(Y) Max. -1 to A: /0 μs ERZC3EK511(Y) ERZC3EK71(Y) ERZC3EK31(Y) ERZC3EK391(Y) ERZC3EK31(Y) ERZC3EK71(Y) ERZC3EK1(Y) ERZC3EK01(Y) (ERZC3EK1(Y) to ERZC3EK11(Y)) 0 0 Max. ERZC3EK11(Y) ERZC3EK(Y) ERZC3EK911(Y) ERZC3EK1(Y) ERZC3EK71(Y) ERZC3EK751(Y) ERZC3EK1(Y) ERZC3EK1(Y) (V) 000 ERZC3EK11(Y) ERZC3EK(Y) ERZC3EK911(Y) ERZC3EK71(Y) ERZC3EK751(Y) ERZC3EK1(Y) ERZC3EK1(Y) ERZC3EK1(Y) Impulse Derating Curve (Relation be tween impulse width and surge, repetitively) 3 Series (ERZC3EK01(Y) to ERZC3EK71(Y)) -1 to A: /0 μs Series (ERZC3EK31(Y) to ERZC3EK1(Y)) 3 Series (ERZC3EK751(Y) to ERZC3EK11(Y)) Impulse Times Times times : 5 minutes to times : minutes Impulse Times Times times : 5 minutes to times : minutes Impulse Times Times times : 5 minutes to times : minutes Nov. 01
6 Performance Characteristicsv (Type E) Characteristics Test Methods/Description Specifications Electrical Standard Test Condition Power times 1 time Electrical characteristics shall be measured at following conditions (Temperature: 5 to 35 C,Humidity: Max. 5 %) The voltage between two terminals with the specified measuring current CmA DC applied is called Vc or VCmA. The measurement shall be made as fast as possible to avoid heat affection. The maximum sinusoidal wave voltage (rms) or the maximum DC voltage that can be applied continuously. The maximum voltage between two terminals with the specified standard impulse current (/0 μs). The maximum power that can be applied within the specified ambient temperature. The maximum energy within the varistor voltage change of ± % when one impulse of ms is applied. The maximum current within the varistor voltage change of ± % with the standard impulse cur rent (/0 μs) applied two times with an interval of 5 minutes. The maximum current within the varistor voltage change of ± % with the standard impulse cur rent (/0 μs) applied one time. To meet the specifi ed value. Mechanical Environmental Temperature Coefficient of Impulse Life Withstanding (Body Insulation) Robustness of Terminations (Tensile) Vibration Dry Heat/ High Temperature Storage Temperature Cycle Dry Heat Load/ High Temperature Load Damp Heat/Humidity (Steady State) VC at 70 C VC at 0 C 1 (%/ C) VC at 0 C 50 The change of Vc shall be measured after the impulse listed below is applied 0 times continuously with the interval of ten sec onds at room temperature. 0 Series 00 A (/0 μs) 3 Series A (/0 μs) The commercial frequency voltage of AC.5 kv shall be applied between terminals and the bottom of the unit for one minute. After gradually applying the load of 9 N (5 kgf) and keeping the unit fi xed for seconds in an axial direction, the terminal shall be visually examined for any damage. After repeadly applying a single harmonic vibration (amplitude: 0.75 mm): double amplitude: 1.5 mm with 1 minute vibration frequency cycles ( Hz to 55 Hz to Hz) to each of three perpendicular directions for hours. Thereafter, the damage of the ter mi nals is visually examined. The specimen shall be subjected to 1±3 C for hours in a thermostatic bath without load and then stored at room temperature and humidity for one to two hours. Thereafter, the change of Vc shall be measured. Step Temperature ( C) Period (minutes) Room Temp. 3 max Room Temp. 3 max. The temperature cycle shown below shall be repeated five times and then stored at room temperature and humidity for one to two hours. The change of Vc and mechanical damage shall be examined. After being continuously applied the at 5±5 C for hours, the specimen shall be stored at room temperature and humidity for one to two hours. Thereafter, the change of Vc shall be measured. The specimen shall be subjected to ± C, 90 to 95 %RH for hours without load and then stored at room temperature and hu mid i ty for one to two hours. Thereafter, the change of Vc shall be measured. 0 to 0.05 %/ C max. ΔV1 ma/v1 ma < ± % No remarkable damage No remarkable damage ΔV1 ma/v1 ma < ±5 % No remarkable damage ΔV1 ma/v1 ma < ±5 % ΔV1 ma/v1 ma < ± % ΔV1 ma/v1 ma < ±5 % Nov. 01
7
Ratings and Characteristics Operating Temperature Range: to 8 C Storage Temperature Range: to 2 C Type VF M Part No. Varistor Allowable Clamping at Ip
ZNR Transient/Surge Absorbers, SMD Type Series: VF Features Large withstanding surge current capability, in compact size Designed for fl ow/refl ow solderings xcellent response against high steep surge
More informationVaristor Voltage. D: Disk, S: Square S:Straight, C:Crimped, I:Inner, Y:Y kink Size(mm) B: Bulk (Standard lead 20mm min.)
FEATURES * Wide operating voltages ranging from 5Vrms to 1000Vrms (6Vdc to 1465Vdc). * Fast response time of less than 25nS, instantly clamping the transient over voltage. * igh surge current handling
More informationMultilayer Varistor for ESD pulse,burst pulse
Multilayer Varistor for ESD pulse,burst pulse Series EZJZ : For high speed signal line (ZnO:Zinc Oxide) (Small capacitance) Series EZJS : For Power line (ST:Strontium Titanate) (High capacitance) series
More informationZNR Transient/Surge Absorbers, SMD Type
, SMD Type Series: VF Features Large withstanding surge current capability, in compact size Designed for fl ow/refl ow solderings xcellent response against high steep surge voltage Low clamping voltage
More informationZNR Surge Absorbers (Type SMD)
ZNR Surge Absorbers SMD Type: Series: VF Features Large withstanding surge current capability, in compact size Designed for fl ow/refl ow solderings Low clamping voltage RoHS compliant Recommended Applications
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationMultilayer Varistor for ESD pulse
Multilayer Varistor for SD pulse Series ZJZS Series ZJZR n Features l Multilayer monolithic ceramic construction l xcellent solderability and superior heat resistance l Large surge current and energy capabilities
More informationData sheet. Form: FBLE3K/b. File name: S10K510GS5_a.doc MODIFICATIONS: New Issue REMARKS: Prepared by Collins-Hunt Release
Form: FB3K/b File name: S10K510GS5_a.doc MODIFITIOS: ew Issue RMRKS: Prepared by ollins-hunt Release signed: P / ollins-hunt signed: signed: QS / Zödl signed: ISSU DT 07.06.04 ISSU a PUBISHR KH P VR PG
More informationMetal Oxide Varistor:TVM-G Series
Features 1. RoHS compliant 2. Low clamping voltage 3. EIA size 0402, 0603, 0805 4. Working voltage: 5.5 ~ 30 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More informationMETAL OXIDE VARISTORS TNR TM
MEA OXIE VARISORS NR M?FEAURES @arge surge capability (the surge current ratings of NR V series, by / Ms, are about two times larger than NR G series). @arge energy capability (1. time larger than NR G
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 82541300 Datum / Date : 31.07.06 description : HIGH SURGE 1206 SMD VARISTOR Lead Free SMD size: 1206 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L
More informationRS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
More informationWidely voltage range 18V~1.8KV Fast response to the rapidly increase Voltage( Excellent non-linearity voltage Symmetric V-l characteristics
Are non-linear resistors utilize a semiconductor electronic ceramic element mainly composed of Zinc Oxide and its resistors change as a function of the applied voltage.it s called Varistor or Transient
More informationFilm Capacitors. EMI suppression capacitors. Date: June 2018
Film Capacitors EMI suppression capacitors Date: June 2018 EPCOS AG 2018. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 82380180121 Datum / Date : 2006-08-01 ROHS Compliant A Mechanische Abmessungen / dimensions : b SIZ Size L T a b min/max min/max min/max min/max 0508 1.05/1.35 1.85 /2.15
More informationGreat withstanding surge current ( 2000A/cm ) No follow-on current Long life. (V) Nominal Varistor Voltage. Tolerance 820= = =10 10
Zinc Oxide Varistor are non-linear resistors utilizing semiconductor electronic ceramic element mainly composed of zinc oxide and its non-linear resistance change as a function of the applied voltage.it
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationMETAL OXIDE VARISTORS TNR
MEA OXIE VARISORS NR?FEAURES @arge surge capability (the surge current ratings of NR V series, by / M Sec., are about two times larger than NR G series). @arge energy capability (1. time larger than NR
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationElectric Double Layer Capacitors Product Specification. To. : DATE : SPECIFICATION WRITTEN CHECKED APPROVED
To. : DATE : 200... SPECIFICATION PRODUCT MODEL : STARCAP : DCS series WRITTEN CHECKED APPROVED 1 Index Page No. ITEM etc. 1 Cover Page 2 Index 1. Scope 2. Part Number System 3 3. Product Model Name 4.
More informationRoHS compliant & Halogen Free
Product Specification DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CHIP VARISTORS S0402/0603 5.5 V TO 38 V RoHS compliant & Halogen Free 2 SCOPE This specification describes chip varistors with lead-free
More informationS P E C I F I C A T I O N S
TO : 2009-09-14 S P E C I F I C A T I O N S PRODUCT : CERAMIC CAPACITOR MODEL : DA (X1,Y1) SERIES Manufacturer Customer WRITTEN CHECKED APPROVED WRITTEN CHECKED APPROVED 9/14 9/14 9/14 / / / DONG IL ELECTRONICS
More informationVaristor Products Radial Lead Varistors > ZA Series
RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationMKP-X2 TECHNICAL TERMS EXPLANATION
TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case of doubt please refer to IEC 60068-1, sub-clause 5.2. Capacitance
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationDistributing Tomorrow s Technologies For Today s Designs Toll-Free:
2W, Ultra-High Isolation DIP, Single & DC/DC s Key Features Low Cost 6 Isolation MTBF > 6, Hours Short Circuit Protection Input, and 24 Output,, 1, {, { and {1 Regulated Outputs Low Isolation Capacitance
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationCeramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Key Features
W, Miniature SIP, Single & Dual Output DC/DC s Key Features Efficiency up to % 000 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0] to +] UL
More informationGas Discharge Tube (GDT) Data Sheet
Gas Discharge Tube (GDT) Data Sheet Features Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs. Stable breakdown voltage. High insulation resistance.
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationMetallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type
Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,
More informationCharacteristics and Definitions Used for Film Capacitors
Characteristics and Definitions Used for Film Capacitors COMMON FILM DIELECTRICS USED IN FILM CAPACITORS PRODUCTS PARAMETER DIELECTRIC (1) UNIT Dielectric constant 1 khz 3.3 3 3. - Dissipation factor 1
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LDSR 0.3-TP/SP1 I P R N = 300 ma For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationProducts Overview 3. MD Series 4. Packing & Dimension 5. Products Overview 8. Explanation of Part Number 9. D Series (5D, 7D, 10D, 14D, 20D) 10
Advanced Material On TECHnology - AMOTECH Disk Varistor/ SMD Molded Varistor >> CONTENTS SMD Molded Varistor Products Overview 3 MD Series 4 Packing & Dimension 5 Disk Varistor Products Overview 8 Explanation
More informationSpecification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
More information/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
More informationMultilayer Ceramic Capacitors (For General Electronic Equipment)
Multilayer Ceramic Capacits (F General Electronic Equipment) Series: ECJ Multilayer Ceramic Capacits(F General Usage) Features Small size and wide capacitance range High humidity resistance and long life
More informationVaristors to
FEATURES Zinc oxide disc, epoxy coated Straight leads Straight leads with flange (2322 592 and 593 series only) Kinked leads. APPLICATION Suppression of transients. DESCRIPTION The varistors consist of
More informationMetal Oxide Varistor for Automotive:TVM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. High surge suppress capability for automotive application (load dump) 3. No temperature derating up to 125 C 4. Bidirectional and symmetrical V/I characteristics
More informationAD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE
1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More information- CAUTION AND WARNING -
- CAUTION AND WARNING - Please contact us for complete technical specification before use and confirm the appropriate condition of your application. If used in a specific appliance that requires an extremely
More informationFunkentstör-Kondensatoren der Klasse X2
STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case
More information4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC
Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 8 C,
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationMETAL OXIDE VARISTORS (TNR )
MEAL OXIE VARISORS (NR ) CA. No. E06J Version1.0 INEX PROUC SEARCH SERIES ABLE PRECAUIONS AN GUIELINES GROUP CHAR PAR NUMBERING SYSEM PROUCION GUIE ECHNICAL ERMS ON VARISORS APING SPECIFICAION PACKAGING
More informationSnubber Capacitors PCPW 236 (Metallized Polypropylene Film Capacitors)
37.5 mm QUICK REFERENCE DATA Capacitance range Capacitance tolerance Rated voltage (DC) Max. repetitive peak voltage (Vpkr) Max. nonrepetitive peak current ( Ipk ) Dissipation factor ( DF ) Insulation
More informationSIOV metal oxide varistors
SIOV metal oxide varistors Block varistors, Series/Type: B2, B0, B60, B80 Date: December 2007 Data Sheet EPCOS G 2008. Reproduction, publication and dissemination of this publication, enclosures hereto
More informationMultilayer Ceramic Capacitors (For General Electronic Equipment)
Multilayer Ceramic Capacits (F General Electronic Equipment) Series: ECJ Multilayer Ceramic Capacits(F General Usage) Features Small size and wide capacitance range High humidity resistance and long life
More informationSymbol Parameter Value Unit RMS on-state current (full sine wave) Qxx35P5 T C. f = 120 Hz T J. 10 μs I GT
Description 30 mp / 35 mp bi-directional solid state switch series is designed for C switching and phase control applications such as motor speed and temperature modulation controls, lighting controls,
More informationS SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
More informationHigh Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
More informationSFRV Polymer PTC Thermistor SFRV ROHS
Polymer PTC Thermistor ROHS Features High voltage endurance. Designed for telecom applications. Low parasitic capacitance, flat impedance with frequency. RoHS compliant and UL certificate(file No.:E305346).
More informationPECIFICATIONS Model TC03 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric.
PECIFICATIONS Model TC3 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric. 2. Main characteristics Table 1 Part No. TC3Z5H169B TC3Z1H169B TC3R1H169B
More information3mm Photodiode PD204-6B
3mm Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More informationReference Only Spec. No. JEFL243B 0003F-01 P 1/ 6
Spec. No. JEFL243B 0003F-01 P 1/ 6 DC Common Mode Choke Coil PLT09HN2003R0P1B Reference Specification 1. Scope This reference specification applies to DC Common Mode Choke Coil (PLT09H Series). 2. Part
More informationTeccor brand Thyristors 65 / 70 Amp Standard SCRs
Sxx65x & Sxx70x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
More informationLAMP /X1C2-1UWA
Features Popular T-1 3/4 round package High luminous power Typical chromaticity coordinates x=0.40, y=0.39 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationMAU100 Series. 1W, Miniature SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
MAU Series W, Miniature SIP, Single & DC/DC s Key Features Efficiency up to 0 Isolation MTBF >,000,000 Hours Low Cost Input,, and Output 3.3,,9,,,{,{9,{ and { Temperature Performance -0 to UL 9V-0 Package
More information100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
More informationDATA SHEET THYRISTOR SURGE SUPPRESSORS MODEMS/LINE CARD PXXXXSX series
Product specification November 06, 201 V.0 DATA SHEET MODEMS/LINE CARD series RoHS compliant & Halogen free 2 Thyristor Surge Suppressors (TSS) Data Sheet Description DO-214AA Thyristor solid state protection
More informationOptocoupler with Transistor Output
Optocoupler with Transistor Output 17197_4 DESCRIPTION The HS817 series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic dual inline package.
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 40 C 1.5 A I T(AV) Average on-state current T C
TCR22-x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current
More information4 400 VDC 2W 450 VDC VDC H ±3 % J ±5 % 40 C to +105 C (450 VDC, 1.1 uf or more 40 C to +85 C) 400 VDC, 450 VDC, 630 VDC 400 VDC 450 VDC
Metallized Polypropylene ilm Capacitor Type: ECW(L) Designed for high frequency and current applications. eatures mall size Excellent frequency characteristics Low loss 85 C, 85 % RH, W.V. for hours RoH
More informationDC Film Capacitors MKT Axial Type
MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationSnubber MMKP 386 AC and pulse double metallized film capacitor
Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP
More informationChip tantalum capacitors (Fail-safe open structure type)
TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationRecommended Land Pattern: [mm]
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated
More informationTYPE. 250 ppm / 200 ppm /
FEATURES High power in small packages Available wide range to automatic insertion machine. APPLICATIONS All general purpose power applications. DESCRIPTION A homogeneous film of metal alloy is deposited
More informationMAU200 Series. 1W, High Isolation SIP, Single & Dual Output DC/DC Converters MINMAX. Block Diagram. Key Features
Component Distributors, Inc. ~ www.cdiweb.com ~ sales@cdiweb.com ~ -0--33 W, High Isolation SIP, Single & DC/DC s Key Features Efficiency up to 00 Isolation MTBF >,000,000 Hours Low Cost Input, and Output
More informationDouble-Sided Chip Resistors
Double-Sided Two parallel resistance elements in a single chip Excellent pulse withstand performance Laser trimmed up to 0.5% tolerance Enhanced working voltage Enhanced power rating Pb-free terminations
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationIS2805 DESCRIPTION FEATURES
DESCRIPTION The is an optically coupled isolator consists of two infrared emitting diodes in reverse parallel connection and optically coupled to an NPN silicon photo transistor. This device belongs to
More information3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS
3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS Hi-CAP (Conductive Polymer Aluminum Electrolytic Capacitor) Hi-CAP is an electrolytic capacitor that uses a highly electric conductive polymer as it
More informationDouble Thyristor Module For Phase Control MT A2
Electrically isolated base plate Industrial standard package Simplified mechanical design, rapid assembly Pressure contact PROTON-ELECTROTEX RUSSIA Double Thyristor Module For Phase Control MT3-595-18-A2
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationAVX Multilayer Ceramic Transient Voltage Suppressors
GENERAL DESCRIPTION TransGuard multilayer varistors are zinc oxide (ZnO) based ceramic semiconductor devices with non-linear voltage-current characteristics (bi-directional) similar to backto-back zener
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More informationTEST CERTIFICATES OR REPORTS ISSUED BY VEIKI-VNL LTD.
Page 2 of 29 TEST CERTIFICATES OR REPORTS ISSUED BY LTD. Type Test Certificate of Complete Type Test This certificate provides the verification of all the rated characteristics of the equipment as assigned
More information