Luis I. González de Vallejo Universidad Complutense de Madrid. Mercedes Ferrer Instituto Geológìco y Minero de España

Size: px

Start display at page:

Download "Luis I. González de Vallejo Universidad Complutense de Madrid. Mercedes Ferrer Instituto Geológìco y Minero de España"

Rolf Brown
5 years ago
Views:

2 Geological Engineering Luis I. González de Vallejo Universidad Complutense de Madrid Mercedes Ferrer Instituto Geológìco y Minero de España with a Foreword by M.H. de Freitas Imperial College, London 7007TS-GONZALEZ FM.indd 3 11/23/2010 5:21:51 PM

3 CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business 2011 Taylor & Francis Group, London, UK Typeset by Vikatan Publishing Solutions (P) Ltd, Chennai, India Printed and bound in Poland by Poligrafia Janusz Nowak, Poznán Authorized translation from the Spanish language edition, entitled INGENIERÍA GEOLÓGICA by GONZÁLEZ DE VALLEJO, LUIS, published by Pearson Educación, S.A. Copyright Pearson Educación, S.A., English translation by Bill Newton, Pauline Moran and Valerie Stacey from Gabinete Lingüístico of the Fundación General de la Universidad Complutense de Madrid. English technical review by M.H. de Freitas, Imperial College, London. All rights reserved. No part of this publication or the information contained herein may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, by photocopying, recording or otherwise, without prior permission in writing from the publisher. Innovations reported here may not be used without the approval of the authors. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Published by: CRC Press/Balkema P.O. Box 447, 2300 AK Leiden, The Netherlands Pub.NL@taylorandfrancis.com Library of Congress Cataloging-in-Publication Data Applied for ISBN: (Hbk) 7007TS-GONZALEZ FM.indd 4 11/23/2010 5:21:51 PM

4 Brief CONTENTS ABOUT THE AUTHORS CONTRIBUTORS FOREWORD PREFACE xv xvii xix xxi PART I FUNDAMENTALS 1 Introduction to Geological Engineering 3 2 Soil mechanics and engineering geology of sediments 19 3 Rock mechanics Hydrogeology 223 PART II METHODS 5 Site investigation Rock mass description and characterization Engineering geological mapping 351 PART III APPLICATIONS 8 Foundations Slopes Tunnels Dams and reservoirs Earth structures 535 PART IV GEOLOGICAL HAZARDS 13 Landslides and other mass movements Seismic hazard Prevention of geological hazards TS-GONZALEZ FM.indd 5 11/23/2010 5:21:52 PM

5 vi Brief CONTENTS APPENDIX A Charts for circular and wedge failure analysis 643 APPENDIX B Pressure units conversion CHART 653 APPENDIX C Symbols and acronyms 657 APPENDIX D LIST OF BOXES 663 APPENDIX E PERMISSIONS TO REPRODUCE FIGURES AND TABLES 665 Index TS-GONZALEZ FM.indd 6 11/23/2010 5:21:52 PM

6 CONTENTS ABOUT THE AUTHORS CONTRIBUTORS FOREWORD PREFACE PART I FUNDAMENTALS xv xvii xix xxi 1 INTRODUCTION TO GEOLOGICAL ENGINEERING Definition and importance of geological engineering the geological environment and its relation with engineering geological factors and geotechnical problems methods and applications in geological engineering information sources in engineering geology How this book is structured 16 Recommended reading 17 References 17 2 SOIL MECHANICS AND ENGINEERING GEOLOGY OF SEDIMENTS Introduction 20 The nature of soils 20 Soils in geotechnical engineering soil description and classification. Phase relationships 23 Types of soils 23 Particle size distribution 23 Plasticity 24 Phase relationships flow of water through soils 28 Total head. Bernoulli s Theorem 29 Hydrostatic conditions 29 Ground water flow 30 Basic concepts. Head loss and permeability 30 Hydraulic head and hydraulic gradient 31 Darcy s law 31 Steady flow in an isotropic medium 33 Anisotropic soil conditions 36 Permeability and water flow in stratified soils Effective stress 40 Soil phases and soil structure 40 Saturated soils. The principle of effective stress 41 Seepage forces and piping 44 Loading saturated soils 50 The concept of consolidation 50 Concepts of loading with and without drainage 51 Undrained loading in saturated soils consolidation and compressibility 56 Normally consolidated and overconsolidated soils 56 Horizontal stresses in the ground 62 Influence of complementary factors on soil behaviour 63 The oedometer test Shear strength of soils 71 Failure criterion 71 The direct shear test 72 Behaviour of soils subjected to shear stress 76 Granular soils 76 Clay soils 78 The triaxial test 79 The test apparatus TS-GONZALEZ FM.indd 7 11/23/2010 5:21:52 PM

7 viii contents Types of test 81 The uniaxial compression test influence of mineralogy and fabric on the geotechnical properties of soils 85 Clay minerals in engineering geology 86 Physico-chemical properties 88 Geotechnical properties and mineralogical composition 89 Microfabric of clayey soils 89 Geotechnical properties and microfabric 93 Summary engineering geological characteristics of sediments 94 Colluvial deposits 95 Alluvial deposits 95 Lacustrine deposits 95 Coastal deposits 95 Glacial deposits 96 Deserts and arid climate deposits 97 Evaporitic deposits 98 Tropical soils 98 Volcanic soils problematic soils 100 Swelling and shrinking clays 101 Dispersive soils 103 Saline and aggressive soils 104 Collapsible soils 104 The action of ice and permafrost 106 Soft sensitive soils 106 Soils susceptible to liquefaction 106 Recommended reading 107 References ROCK MECHANICS Introduction 110 Definition, objectives and scope 110 Rock and soil 112 Rock masses physical and mechanical properties of rocks 116 Rock characteristics 116 Physical properties of intact rock 118 Rock classification for geotechnical purposes 122 Rock mass classification 124 Weathering of rock 125 Weathering processes 125 Weathering of intact rock 126 Weathering of rock masses 127 Groundwater 129 Permeability and water flow 129 Effects of water on the properties of rock masses Stress and strain in rocks 131 Force and stress 131 Stress on a plane 132 Stress in three dimensions 138 Strength and failure 139 Basic concepts 139 Failure mechanisms 140 Stress-strain relationships in rock 141 Strength criteria strength and deformability of intact rock 147 Strength and strength parameters 147 Effects of anisotropy and pore pressure on strength 147 Failure criteria 149 Mohr-Coulomb criterion 149 Hoek-Brown s criterion 150 Deformability 150 Strength and deformability laboratory tests 154 Uniaxial compression test 154 Triaxial compression test 159 Tensile strength tests 162 Sonic velocity 164 Limitations of laboratory tests Discontinuities 165 Influence on rock mass behaviour 165 Types of discontinuities 166 Characteristics of discontinuities 168 Shear strength of discontinuity planes 170 Barton and Choubey criterion 172 Discontinuities with infilling 175 Direct shear strength laboratory test 175 Permeability and water pressure strength and deformability of rock masses 179 Rock mass strength 179 Failure criteria for isotropic rock masses 181 Failure criteria for anisotropic rock masses TS-GONZALEZ FM.indd 8 11/23/2010 5:21:52 PM

8 CONTents ix Summary 187 Rock mass deformability 187 In situ deformability tests 188 Geophysical methods 188 Empirical correlations 189 Permeability and water pressure 193 Scale effect In situ stress 201 Origin and types of in situ stress 201 Geological and morphological factors which influence the state of stress 203 Methods for measuring in situ stress 205 Measuring the direction of stresses by geological methods 206 Estimating stress magnitude from empirical relationships 207 Instrumental methods for measuring orientation and magnitude of stress Rock mass classifications 215 RMR Classification 216 Geomechanical classifications in practice 216 Recommended reading 220 References Hydrogeology hydrogeological behaviour of soils and rocks 224 Types of aquifers and their behaviour 224 Piezometric level 227 Water movement in aquifers Hydrogeological parameters 230 Porosity 230 Storage coefficient 231 Permeability 232 Transmissivity flow. Darcy s law and fundamental flow equations in porous media 233 Darcy s law 233 Darcy s velocity and real velocity 234 Generalization of Darcy s law 235 Continuity equation for steady flow 236 Laplace equation 236 Poisson s equation 237 Flow equation in transitory regime evaluation methods for hydrogeological parameters 238 Pumping tests 238 Injection tests 248 Tracer tests solution methods 251 Analytical methods 251 Flow nets 252 Numerical methods Chemical properties of water 255 Chemical quality of groundwater 255 Physical-chemical processes. Water-aquifer interaction 256 Contamination of groundwater 257 Anthropogenic activities 257 Mechanisms of ground water contamination 258 Recommended reading and references 259 PART II METHODS 5 SITE INVESTIGATION Planning and design 264 Aims and importance 264 Planning site investigations Preliminary investigations 268 Desk-based study 268 Aerial photo and remote sensing interpretation 269 Aerial photo interpretation 269 Remote sensing 270 The walk-over survey 273 Preliminary site investigation report Engineering geophysics 275 Surface geophysics 276 Electrical methods 276 Seismic methods 277 Electromagnetic methods 282 Gravity methods 285 Magnetic methods 285 Borehole geophysics 286 Geophysical logging 286 Seismic logging inside boreholes 287 Seismic tomography boreholes, trial pits, trenches and sampling 289 Borehole drilling 289 Rotary drilling 289 Auger drilling 291 Percussion drilling TS-GONZALEZ FM.indd 9 11/23/2010 5:21:52 PM

9 x contents Special boreholes 293 Number and depth of boreholes 293 Borehole data presentation 293 Trial excavations 293 Geotechnical sampling 294 Borehole logging In situ tests 301 Standard penetration test (SPT) 301 Probing penetrometers 302 Cone penetration test (CPT) 303 Field vane test 305 Schmidt hammer test 305 Point load test 306 Shear strength test on discontinuities 308 Tilt test 310 Pressuremeter test 311 Plate loading test on soils 311 Dilatometer test 312 Plate loading test on rock 313 Flat jack test 313 Seismic methods 316 Measuring in situ stress 316 Permeability tests 316 Permeability tests on soils 316 Permeability tests on rock geotechnical instrumentation 319 Displacement measurements 319 Pore pressure and water level measurements 322 Stress measurements 324 Recommended reading 325 References ROCK MASS DESCRIPTION AND CHARACTERISATION Methodology Description and zoning Intact rock characterisation 331 Identification 332 Weathering 332 Strength Description of discontinuities 335 Orientation 335 Spacing 336 Persistence 337 Roughness 338 Strength of discontinuity wall 340 Aperture 341 Filling 342 Seepage Rock mass parameters 343 Number and orientation of discontinuity sets 344 Block size and fracture degree 344 Degree of weathering rock mass classification and characterisation 349 Recommended reading 349 References Engineering Geological Mapping Definition types of maps 352 Classification 352 Content of engineering geological maps 354 Classification and geotechnical properties of soils and rocks 354 Hydrogeological conditions 357 Geomorphological conditions 357 Geodynamic processes mapping methods 358 Geotechnical zoning 358 Representing data 358 Computer aided mapping 360 Geotechnical cross-sections Data collection applications 361 Land and urban planning 361 Engineering 361 Recommended reading 365 References 365 PART III APPLICATIONS 8 Foundations introduction 370 Basic design criteria 370 Stages in foundation design shallow foundations 371 Types of shallow foundations 371 Ultimate bearing capacity 372 Basic definitions 372 Calculating the ultimate bearing capacity TS-GONZALEZ FM.indd 10 11/23/2010 5:21:52 PM

10 CONTents xi Ultimate bearing capacity in undrained conditions 374 Ultimate bearing capacity in drained conditions 375 Factor of safety. Safe bearing capacity 375 Distribution of pressures under shallow foundations 376 Stress distribution under loaded areas 378 Fundamentals. Criteria for use 378 Point load on an elastic half-space 379 Vertical stresses under the corner of a uniformly loaded rectangle 379 Stresses under a uniformly loaded circular area 380 Settlement in soils 382 General considerations 382 Immediate and consolidation settlement 382 Immediate and primary consolidation settlements in saturated clays 383 Settlements in granular soils 384 Settlements in stiff clays Deep foundations 385 Types of pile 386 Single piles 387 Ultimate load capacity of a pile 389 Pile groups 391 Negative friction on piles 391 Laterally loaded piles foundations on rock foundations in complex geological conditions 394 Expansive soils 394 Collapsible soils 396 Karstic cavities 396 Volcanic cavities 396 Soft and organic soils 397 Anthropogenic fills site investigation 398 Stages in site investigations 398 Recommended reading 400 References SLOPES Introduction Site investigations factors influencing slope stability 404 Stratigraphy and lithology 404 Geological structure and discontinuities 404 Hydrogeological conditions 405 Geomechanical properties of soil and rock masses 408 In situ stresses 408 Other factors Types of slope failure 410 Soil slopes 410 Rock slopes 411 Plane failure 411 Wedge failure 412 Toppling 413 Buckling 414 Non-planar failure Stability analysis 415 Introduction 415 Limit equilibrium methods 415 Soil slopes 417 Rock slopes 426 Stress-strain methods 432 Geomechanical slope classification 433 Slope mass rating (SMR) Stabilization measures 434 Introduction 434 Stabilization methods 435 Modifying the geometry 435 Drainage methods 436 Resistant structural elements 439 Walls and retaining elements 440 Surface protection measures Monitoring and control Slope excavation 445 Rippability criteria 447 Recommended reading 449 References Tunnels Introduction Site investigation influence of geological conditions 454 Geological structure 457 Discontinuities 458 Intact rock strength 459 Hydrogeological conditions 460 In situ stress 461 Methods of analysis 462 Effects of high stress on tunnelling TS-GONZALEZ FM.indd 11 11/23/2010 5:21:53 PM

11 xii contents 10.4 geomechanical design parameters 464 Geological and geomechanical data 464 Strength and deformability 465 Magnitude and direction of in situ stress 466 Estimation of K from the TSI index 466 Sheorey s method 471 Water inflow and pressure rock mass classifications for tunnelling 472 Q System 472 SRC rock mass classification 476 Suggested criteria for the application of rock mass classifications tunnel support design using rock mass classifications 480 Tunnel support based on RMR classification 481 Tunnel support based on the Q index Excavability tunnel excavation and support methods in rock 484 Excavation methods 487 Stages of excavation 489 Support systems 489 Ground improvement 491 The New Austrian Tunnelling Method 491 Portals tunnel excavation and support methods in soil 493 Non-mechanical excavation methods 493 Semi-mechanical excavation methods 493 Tunnel excavation with tunnel boring machines geological engineering during tunnel construction 495 Recommended reading 499 References DAMS AND RESERVOIRS Introduction types of dams and auxiliary structures 503 Types of dams 503 Embankment dams 504 Concrete dams 504 Auxiliary structures site investigation 507 Planning site investigation 507 Preliminary and feasibility studies 508 Selecting the type of dam 508 Design 508 Construction 508 Operation 509 Site investigation methods engineering geological criteria for dam selection 513 General criteria 513 Foundation conditions 513 Availability of materials 514 Siting of auxiliary structures 514 Conditions for embankment dams 515 Conditions for concrete dams 515 Environmental considerations geological materials for dam construction 516 Site investigations for dam materials 516 Types of materials 516 Cores 516 Rockfills and ripraps 517 Filters and drains 517 Aggregates reservoir water tightness permeability of dam foundations 519 Uplift pressures 519 Erosion 519 Leakage control reservoir slope stability engineering geological conditions for dam foundations 523 General conditions 523 Loads on dam foundations 523 Dam foundation failure mechanisms 524 Stress distributions in dam foundations 527 Foundation improvement measurements 528 Dam foundation problems and possible remedial measures seismic actions and induced seismicity 532 Recommended reading 533 References Earth Structures Introduction TS-GONZALEZ FM.indd 12 11/23/2010 5:21:53 PM

12 CONTents xiii 12.2 Design methodology Materials 540 Earthfill embankments 540 Rockfill embankments 541 Coarse rockfill Implementation and control Embankments on soft soils Embankments on slopes 550 References and recommended reading 551 PART IV GEOLOGICAL HAZARDS 13 Landslides and other Mass Movements Introduction Slope movements 556 Types of slope movements 557 Landslides 557 Flows 560 Rock falls 561 Rock avalanches 562 Lateral displacements 562 Causes of slope movements 563 Rainfall and climatic conditions 565 Changes in water level 567 Erosion 567 Earthquakes 568 Volcanism 569 Human actions Investigation of landslides 570 General field surveys 570 Analysis of the processes 574 Detailed investigations 576 Stability analysis 580 Monitoring 581 Alarm systems Corrective measures 582 Stabilisation and protection against rock falls Collapse and subsidence 585 Types of movements and their causes 585 Collapse 586 Subsidence 587 Investigation of the processes 587 Corrective measures prevention of risks from mass movements 589 Susceptibility and hazard maps 591 Slope movement maps 591 Collapse and subsidence maps 592 Recommended reading 593 References SEISMIC HAZARD Introduction Faults and earthquakes 596 Faults as the source of earthquake 596 Stick-slip regimes and the seismic cycle 597 The seismic fault model 598 Slip rates and recurrence periods 599 Geological recording of fault activity 600 The study of seismic faults seismicity studies Seismic hazard analysis 606 Deterministic method 606 Probabilistic methods seismic site response 609 Design earthquake 610 Seismic parameters of ground motion 610 Modification of ground motion by local conditions ground effects induced by earthquakes 613 Liquefaction potential 613 Landslides induced by earthquakes 615 Fault rupture applications to geological engineering 617 Seismic hazard studies applied to site assessment 617 Seismic microzonation 617 Seismic vulnerability assessment 619 Recommended reading 622 References Prevention of Geological Hazards Geological hazards hazard, risk and vulnerability Safety criteria in geological engineering prevention and mitigation of geological hazards TS-GONZALEZ FM.indd 13 11/23/2010 5:21:53 PM

13 xiv contents 15.5 Hazard and risk maps 639 Recommended reading 641 References 642 APPENDIX A Charts for circular and wedge failure analysis 643 APPENDIX B Pressure units conversion chart 653 APPENDIX C Symbols and acronyms 657 APPENDIX D LIST OF BOXES 663 APPENDIX E PERMISSIONS TO REPRODUCE FIGURES AND TABLES 665 Index TS-GONZALEZ FM.indd 14 11/23/2010 5:21:53 PM

Table of Contents Chapter 1 Introduction to Geotechnical Engineering 1.1 Geotechnical Engineering 1.2 The Unique Nature of Soil and Rock Materials

Table of Contents Chapter 1 Introduction to Geotechnical Engineering 1.1 Geotechnical Engineering 1.2 The Unique Nature of Soil and Rock Materials 1.3 Scope of This Book 1.4 Historical Development of Geotechnical