IEC TC 113 Nanotechnology for electrical and electronic products and systems
|
|
|
- Nigel Shepherd
- 6 years ago
- Views:
Transcription
1 IEC TC 113 Nanotechnology for electrical and electronic products and systems Mike Leibowitz TC 113 USNC TAG Secretary February 28, 2017 ANSI NSP Arlington, VA
2 - Background - Liaisons - Graphene work - US stakeholder involvement
3 TC 113 History - IEC Advisory Group formed to consider new area of standardization work in nano-electrotechnology in light of growth in nano-enabled electronics - IEC established new TC 113 in First plenary meeting in Frankfurt in 2007
4 TC 113 Priorities - Determine top standardization needs in the market - Establish liaisons with TC s and allied organizations - First deliverable Blank detail specification for CNT s
5 - JWG1, Terminology TC 113 Working Group Structure - JWG2, Measurement and characterization - WG3, Performance assessment - WG7, Reliability assessment
6 TC 113 Working Group Structure - WG8, Graphene related materials, CNT materials - WG9, Nano-enabled photovoltaics, thin film organic nano-electronics, nanoscale contacts and interconnects - WG10, Luminescent nanomaterials - WG11, Nano-enabled energy storage
7 TC 113 Liaisons - ISO TC 229, Nanotechnologies (JWG1, JWG2) - IEC TC 1, Terminology (JWG1) - IEC TC 21, Secondary cells and batteries (WG11) - IEC TC 47, Semiconductor devices - IEC TC 82, Solar photovoltaic energy systems (WG9) - IEC TC 119, Printed electronics - IEEE, SEMI, ANF
8 Blank detail specifications Graphene work in TC IEC , Nanomanufacturing Material specifications, Part 3-1, Blank detail specification for graphene for electrotechnical applications (Committee Draft (CD) stage) - IEC , Nanomanufacturing Material specifications, Part 3-2, Sectional blank detail specification for nano-ink (Potential work item (PWI) stage)
9 Graphene work in TC 113 Detail specifications - IEC/TS , Nanomanufacturing Material specifications, Part 3-3, Detail specification for singlelayer graphene (PWI) - IEC/TS , Nanomanufacturing Material specifications, Part 3-4, Detail specification for bi-layer graphene (PWI)
10 Key control characteristics Graphene work in TC IEC/TS : Graphene - Measurement of sheet resistance of commercial graphene powders by the Four Probe Method (approved work item) - IEC/TS : Graphene Evaluation of the number of layers of graphene (approved work item) - IEC/TS : Graphene-Characterization of CVD graphene domains (CD)
11 Key control characteristics Graphene work in TC IEC/TS : Graphene - Surface conductance measurement using resonant cavity (published) - IEC/TS : Graphene sheet resistance and contact resistance measurement using the transmission line method (PWI) - IEC/TS : Graphene - Uniformity of strain in graphene analyzed by Raman spectroscopy (PWI)
12 Key control characteristics Graphene work in TC IEC/TS : Determination of specific surface area of graphene materials using methylene blue adsorption method (PWI) - IEC/TS : Graphene - Measurement of sheet resistance by the four-point probe method (PWI) - IEC/TS : Graphene - Measurement of sheet resistance by the non-contact Eddy current method (PWI)
13 Key control characteristics Graphene work in TC IEC/TS : Graphene - Measurement of sheet resistance by terahertz time-domain spectroscopy (PWI) - IEC/TS : Graphene - Defect level of graphene analyzed by Raman spectroscopy (PWI) - IEC/TS : Determination of content of functional group of graphene materials using Boehm's titration method (PWI)
14 Key control characteristics Graphene work in TC IEC/TS : Graphene - Defect level analysis of graphene powder using Raman spectroscopy (PWI) - ISO/TR 19733: Matrix of characterization and measurement methods for Graphene (PWI) - ISO/TS : Nanotechnologies - Vocabulary - Part 13: Graphene and other two dimensional materials (Draft Technical Specification (DTS) stage)
15 Participate! - Standards drive markets, so drive the standards! - Manufacturer and customer stakeholders are critical - Join the TC 113 TAG
16 Thank you! Mike Leibowitz IEC TC 113 USNC TAG Secretary T: M:
Normenliste Nanotechnologie 1
Normenliste Nanotechnologie 1 Diese Normenliste ist bei der Studie zu berücksichtigen sowie gegebenenfalls zu vervollständigen. Die Auflistung ist auf Englisch mit dem Stand vom Juni 2015. Norm Titel Komitee
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 13278 First edition 2011-11-01 Nanotechnologies Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry Nanotechnologies
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 13278 First edition 2011-11-01 Nanotechnologies Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry Nanotechnologies
International Standardization for Measurement and Characterization of Nanomaterials
2012/SOM2/SCSC/CON/008 International Standardization for Measurement and Characterization of Nanomaterials Submitted by: Japan 9 th Conference on Standards and Conformance in the Field of Innovations and
VAMAS and Nanotechnology Steve Freiman VAMAS Secretary National Standards Panel December 5, 2013
VAMAS and Nanotechnology Steve Freiman VAMAS Secretary National Standards Panel December 5, 2013 What is VAMAS? Formed as one of 18 cooperative projects at the1982 Economic Summit of the GATT 7 to stimulate
Standards and their value in general and specifically for nanotechnology
Standards and their value in general and specifically for nanotechnology Charles Clifford, Surface Technology Group, National Physical Laboratory charles.clifford@npl.co.uk Denis Koltsov, Chair ISO TC229
ISO/TR TECHNICAL REPORT. Nanotechnologies Methodology for the classification and categorization of nanomaterials
TECHNICAL REPORT ISO/TR 11360 First edition 2010-07-15 Nanotechnologies Methodology for the classification and categorization of nanomaterials Nanotechnologies Méthodologie de classification et catégorisation
ISOTC24/SC4 Particle Sizing by methods other than Sieving
ISOTC24/SC4 Particle Sizing by methods other than Sieving Kevin Powers, Secretary ISOTC24/SC4 (ANSI) Particle Engineering Research Center University of Florida Ph: 352-846-1194 email:kpowers@perc.ufl.edu
Register for the event here
ANSI-NSP 101r1-2018 Date Revised: March 9, 2018 Draft Agenda ANSI Nanotechnology Standards Panel (ANSI-NSP) www.ansi.org/nsp U.S. Department of Agriculture Sidney R. Yates Federal Building 201 14th Street
ASTM International Committee E56 on Nanotechnology
ASTM International Committee E56 on Nanotechnology http://www.astm.org/commit/committee/e56.htm Debra L. Kaiser Material Measurement Laboratory, NIST Vice-Chair, Committee E56 ANSI Panel Meeting February
NPL Good Practice Guide and future standards for Graphene
NPL Good Practice Guide and future standards for Graphene Charles Clifford Surface Technology Group, National Physical Laboratory, UK charles.clifford@npl.co.uk NPL: Who are we The UK s national standards
Nanocrystalline Cellulose:
Nanocrystalline Cellulose: International Standardization & Metrological Approaches Alan Steele National Research Council Institute for National Measurement Standards TAPPI International Conference on Nano
Wafer-scale fabrication of graphene
Wafer-scale fabrication of graphene Sten Vollebregt, MSc Delft University of Technology, Delft Institute of Mircosystems and Nanotechnology Delft University of Technology Challenge the future Delft University
Transparent Electrode Applications
Transparent Electrode Applications LCD Solar Cells Touch Screen Indium Tin Oxide (ITO) Zinc Oxide (ZnO) - High conductivity - High transparency - Resistant to environmental effects - Rare material (Indium)
Global Intellectual Property Issues for Nanotechs:
Global Intellectual Property Issues for Nanotechs: Applications and Standards Chinh H. Pham Greenberg Traurig, LLP (617) 310-6239 phamc@gtlaw.com www.gtlaw.com November 2005 1 GREENBERG TRAURIG, LLP ATTORNEYS
Welsh Centre for Printing and Coating. College of Engineering
Welsh Centre for Printing and Coating College of Engineering Welsh Centre for Printing and Coating Potential applications for plasma functionalised GNP s for active packaging Tim Claypole a, Chris Spacie
Thermoelectric Energy Harvesting with Carbon Nanotube Systems
Thermoelectric Energy Harvesting with Carbon Nanotube Systems Presented by Thomas C. Van Vechten, Ph.D. At the New England Nanomanufacturing Summit at UMass Lowell, June 2010 1 Outline Carbon Nanotubes
Nanomanufacturing Issues
Nanomanufacturing Issues Ehr Ping Huangfu Industrial Technologies Program U.S. Department of Energy 2008 International Conference on Nanotechnology for the Forest Products Industry Nanotechnology from
Session V: Graphene. Matteo Bruna CAMBRIDGE UNIVERSITY DEPARTMENT OF ENGINEERING
Session V: Graphene Matteo Bruna Graphene: Material in the Flatland Graphite Graphene Properties: Thinnest imaginable material Good(and tunable) electrical conductor Strongest ever measured Stiffest known
Solutions for Assignment-8
Solutions for Assignment-8 Q1. The process of adding impurities to a pure semiconductor is called: [1] (a) Mixing (b) Doping (c) Diffusing (d) None of the above In semiconductor production, doping intentionally
Standards for Nanotechnology Workforce Education
Standards for Nanotechnology Workforce Education Standards Development Organizations (SDOs) Global International Organization for Standardization International Electrotechnical Commission Regional European
Scalable Nanomaterials and Nanostructures for Energy and Flexible Electronics
Scalable Nanomaterials and Nanostructures for Energy and Flexible Electronics Liangbing (Bing) Hu MSE & Energy Center University of Maryland College Park Email: binghu@umd.edu 1 Transparent Paper from
Reliability Physics and Engineering: Key to Transformative Research. Aris Christou, MSE and ME Department, University of Maryland;
Reliability Physics and Engineering: Key to Transformative Research Aris Christou, MSE and ME Department, University of Maryland; christou@umd.edu "Advanced manufacturing is a family of activities that
Standardization of Test Methods for Practical Superconducting Wires
Standardization of Test Methods for Practical Superconducting Wires Kozo Osamura Research Institute for Applied Sciences Sakyo-ku, Tanaka Ohi-cho 49, Kyoto 606-8202 Japan E-mail: kozo_osamura@rias.or.jp
Nanomechanics Measurements and Standards at NIST
Nanomechanics Measurements and Standards at NIST Robert F. Cook Deputy Chief, Ceramics Division Leader, Nanomechanical Properties Group robert.cook@nist.gov NIST Mission Promote U.S. innovation and industrial
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Consumer goods Brussels, 2 nd February 2010 M/461 EN MANDATE ADDRESSED TO CEN, CENELEC AND ETSI FOR STANDARDIZATION ACTIVITIES REGARDING
Paper and Cellulosic Materials as Flexible Substrates for 2D Electronic Materials
Paper and Cellulosic Materials as Flexible Substrates for 2D Electronic Materials Prof. Eric M. Vogel, Prof. M. Shofner, Brian Beatty Materials Science & Engineering Trends in Electronics Internet of things
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13095 First edition 2014-07-15 Surface Chemical Analysis Atomic force microscopy Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
ISO 2575 INTERNATIONAL STANDARD. Road vehicles Symbols for controls, indicators and tell-tales
INTERNATIONAL STANDARD ISO 2575 Eighth edition 2010-07-01 Road vehicles Symbols for controls, indicators and tell-tales Véhicules routiers Symboles pour les commandes, indicateurs et témoins Reference
ISO/TR TECHNICAL REPORT. Gears Thermal capacity Part 1: Rating gear drives with thermal equilibrium at 95 C sump temperature
TECHNICAL REPORT ISO/TR 14179-1 First edition 2001-07-15 Gears Thermal capacity Part 1: Rating gear drives with thermal equilibrium at 95 C sump temperature Engrenages Capacité thermique Partie 1: Capacité
STANDARD: SPECIFICATION FOR PROTECTIVE ENCLOSURE AND CARRIER SYSTEMS USED TO TRANSPORT AND STORE ( INCH EUV RETICLES
Entegris Edit -SEMI Draft Document (10-11-2006 Revision) NEW STANDARD: SPECIFICATION FOR PROTECTIVE ENCLOSURE AND CARRIER SYSTEMS USED TO TRANSPORT AND STORE 6 INCH EUV RETICLES This specification draft
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13006 Second edition 2012-03-01 Ceramic tiles Definitions, classification, characteristics and marking Carreaux et dalles céramiques Définitions, classification, caractéristiques
Commercial Graphene Applications: Current Research and Future Prospects
Commercial Graphene Applications: Current Research and Future Prospects Overview History and Overview of Graphene Angstron Materials and Nanotek Instruments Applications of Graphene Thermal Management
ISO/TR TECHNICAL REPORT. Determination of uncertainty for volume measurements made using the gravimetric method
TECHNICAL REPORT ISO/TR 20461 First edition 2000-11-01 Determination of uncertainty for volume measurements made using the gravimetric method Détermination de l'incertitude de mesure pour les mesurages
ISO/TR TECHNICAL REPORT. Gears Thermal capacity Part 2: Thermal load-carrying capacity
TECHNICAL REPORT ISO/TR 14179-2 First edition 2001-08-01 Gears Thermal capacity Part 2: Thermal load-carrying capacity Engrenages Capacité thermique Partie 2: Capacité de charge thermique Reference number
ISO INTERNATIONAL STANDARD. Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method
INTERNATIONAL STANDARD ISO 22007-3 First edition 2008-12-15 Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method Plastiques Détermination de la
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16242 First edition 2011-12-01 Surface chemical analysis Recording and reporting data in Auger electron spectroscopy (AES) Analyse chimique des surfaces Enregistrement et notification
ISO/TR TECHNICAL REPORT. Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life
TECHNICAL REPORT ISO/TR 1281-1 First edition 2008-12-01 Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life Roulements Notes explicatives sur l'iso 281
Space environment (natural and artificial) Realtime solar activity and space environment information for spacecraft operation
ISO 2008 All rights reserved ISO TC 20/SC 14 N873 Date: 2012-07-31 ISO/CDV 16709 ISO TC 20/SC 14/WG 4 Secretariat: Space environment (natural and artificial) Realtime solar activity and space environment
Quality Assurance in solar thermal heating and cooling technology. Summary report Absorber surface durability
Quality Assurance in solar thermal heating and cooling technology Keeping track with recent and upcoming developments Summary report Absorber surface durability SP Technical Research Institute of Sweden
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12828-2 First edition 2016-12-15 Validation methods for fire gas analyses Part 2: Intralaboratory validation of quantification methods Méthode de validation des analyses de gaz
This document is a preview generated by EVS
TECHNICAL REPORT ISO/TR 19319 Second edition 2013-03-15 Surface chemical analysis Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods Analyse chimique des
Impact Factor Journals of Physics
Impact Journals of Physics Indexed in ISI Web of Science (JCR SCI, 2016) Compiled By: Arslan Sheikh In Charge Reference & Research Section Library Information Services COMSATS Institute of Information
INTERNATIONAL STANDA
INTERNATIONAL STANDA 8512-2 First edition 1990-12-81 Surface plates - Part 2: Granite Marbres de tracage et de contr6le - 9 Partie 2: Marbres en reche Reference number ISO 8512-2: 199O(E) ISO 8512=2:1990(E)
ISO INTERNATIONAL STANDARD. Spherical plain bearings Part 3: Thrust spherical plain bearings. Rotules lisses Partie 3: Rotules lisses axiales
INTERNATIONAL STANDARD ISO 12240-3 First edition 1998-08-15 Spherical plain bearings Part 3: Thrust spherical plain bearings Rotules lisses Partie 3: Rotules lisses axiales A Reference number ISO 12240-3:1998(E)
A Minimal Set of Characterization Parameters
A Minimal Set of Characterization Parameters Ensuring Appropriate Material Characterization in Nano-Toxicity Studies: A Workshop October 28, 2008 Nigel Walker, Ph.D. National Toxicology Program Washington,
ISO 9277 INTERNATIONAL STANDARD. Determination of the specific surface area of solids by gas adsorption BET method
INTERNATIONAL STANDARD ISO 9277 Second edition 2010-09-01 Determination of the specific surface area of solids by gas adsorption BET method Détermination de l'aire massique (surface spécifique) des solides
In today s lecture, we will cover:
In today s lecture, we will cover: Chemical Vapour Deposition Atomic Layer Deposition Layer-by-Layer Polyelectrolyte Depositions 1 Nanofilms Goals for this section: Understand the chemistry of deposition
GRAPHENE: TECHNOLOGIES, APPLICATIONS AND MARKETS
GRAPHENE: TECHNOLOGIES, APPLICATIONS AND MARKETS AVM075B July 2012 Andrew McWilliams Project Analyst ISBN: 0-89336-060-0 BCC Research 49 Walnut Park, Building 2 Wellesley, MA 02481 Phone: 866-285-7215
EA Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement
Publication Reference EA-10/11 EA Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical PURPOSE This document has been produced by EA as a means of giving advice for calibrating
ARFTG 84th WORKSHOP The New Frontiers for Microwave Measurements
84th ARFTG Microwave Measurement Conference ARFTG 84th WORKSHOP The New Frontiers for Microwave Measurements December 3rd, 2014 Boulder, Colorado St. Julien Hotel 84 th ARFTG Topic: The New Frontiers for
Nanomaterials and Nanotechnology. Regulatory Update
Nanomaterials and Nanotechnology Regulatory Update Shaun F. Clancy, Ph.D. October 21, 2015 My perspective is informed by. Employment by a chemical company that manufactures both large volume and specialty
First edition
INTERNATIONAL STANDARD 7066-2 First edition 988-07-0 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXAYHAPOJJHAR OPTAHM3A~MR l-l0 CTAH~APTM3AL/MM Assessment
Liberating the Nanotube: From Lab to Large Scale Production
Liberating the Nanotube: From Lab to Large Scale Production HVM MNT Expo 2006 - Cambridge 11 December Russell Clarke Carbon Nanomaterials Business Manager Thomas Swan & Co. Ltd. Introduction Thomas Swan
Nano Materials and Devices
Nano Materials and Devices Professor Michael Austin Platform Technologies Research Institute Nano Materials and Devices Program Aim: to develop an integrated capability in nanotechnology Design and modelling
Carbon Nanomaterials: Nanotubes and Nanobuds and Graphene towards new products 2030
Carbon Nanomaterials: Nanotubes and Nanobuds and Graphene towards new products 2030 Prof. Dr. Esko I. Kauppinen Helsinki University of Technology (TKK) Espoo, Finland Forecast Seminar February 13, 2009
INTERNATIONAL STANDARD
L - -----we- - -- ------ _. --- _ - -- -- --. _ -- --.. INTERNATIONAL STANDARD Is0 8302 First edition 1991-08-01 Thermal insulation - Determination of steady-state thermal resistance and related properties
Processing and Applications of Carbon Nanotubes, Graphene, and Beyond
Processing and Applications of Carbon Nanotubes, Graphene, and Beyond Professor Mark C. Hersam Department of Materials Science and Engineering Northwestern University http://www.hersam-group.northwestern.edu/
OEM Silicon Pressure Die
OEM Silicon Pressure Die SM9520 Series FEATURES High volume, cost effective Gauge configuration Constant current or constant voltage drive Millivolt output Available in 0.15, 0.60 & 1.50 PSIG full-scale
Research Grants Approved and Funded
Research Grants Approved and Funded Koratkar has won 35 grants (totaling ~ $9.7 Million) from several agencies such as the National Science Foundation, Office of Naval Research, Army Research Office, Advanced
In the name of Allah
In the name of Allah Nano chemistry- 4 th stage Lecture No. 1 History of nanotechnology 16-10-2016 Assistance prof. Dr. Luma Majeed Ahmed lumamajeed2013@gmail.com, luma.ahmed@uokerbala.edu.iq Nano chemistry-4
Supporting Information
Electronic Supplementary Material (ESI) for Nanoscale. This journal is The Royal Society of Chemistry 215 Supporting Information Enhanced Photovoltaic Performances of Graphene/Si Solar Cells by Insertion
Research to Improve Photovoltaic (PV) Cell Efficiency by Hybrid Combination of PV and Thermoelectric Cell Elements.
UNIVERSITY OF CENTRAL FLORIDA Research to Improve Photovoltaic (PV) Cell Efficiency by Hybrid Combination of PV and Thermoelectric Cell Elements. Page 129 PI: Nicoleta Sorloaica-Hickman, Robert Reedy Students:
Marcus Klein, SURAGUS GmbH
RPGR2017 21.09.2017 Singapore Marcus Klein, SURAGUS GmbH SURAGUS as company and as EU Gladiator Challenges for industrial Graphene applications Example application graphene as TCM Quality characteristics
IEC Tritium Standard
detect and identify IEC 62303 Tritium Standard Dr. Alfred Klett Berthold Technologies, Bad Wildbad, Germany 21 st Annual Air Monitoring Users Group (AMUG) Meeting Palace Station Hotel, Las Vegas, Nevada,
ISO INTERNATIONAL STANDARD. Spherical plain bearings Part 2: Angular contact radial spherical plain bearings
INTERNATIONAL STANDARD ISO 12240-2 First edition 1998-08-15 Spherical plain bearings Part 2: Angular contact radial spherical plain bearings Rotules lisses Partie 2: Rotules lisses radiales à contact oblique
Quantum Dot Spectrum Converter Coverglass for Enhanced High Efficiency Photovoltaics
Quantum Dot Spectrum Converter Coverglass for Enhanced High Efficiency Photovoltaics Theodore G. Stern DR Technologies, Inc. San Diego, CA 92020 Business Area Manager Space Power, Optical and Thermal Products
Dr Petridis Konstantinos (PhD, St-Andrews) Assistant Professor Short CV
Dr Petridis Konstantinos (PhD, St-Andrews) Assistant Professor Short CV Dr Konstantinos Petridis received his Bachelor in 1996 from the Department of Physics of the University of Crete, Greece. He received
Definition and regulation in terms of mechanism of action and intended use
Definition and regulation in terms of mechanism of action and intended use 1 - Nanomaterial-containing medical devices 2 - (Ingestible) medical devices composed of substances IMDRF-3 / 20 March 2013 /
Supplementary Information
Supplementary Information Supplementary Figure 1. fabrication. A schematic of the experimental setup used for graphene Supplementary Figure 2. Emission spectrum of the plasma: Negative peaks indicate an
ISO INTERNATIONAL STANDARD. Surface chemical analysis X-ray photoelectron spectroscopy Repeatability and constancy of intensity scale
INTERNATIONAL STANDARD ISO 24237 First edition 2005-06-01 Surface chemical analysis X-ray photoelectron spectroscopy Repeatability and constancy of intensity scale Analyse chimique des surfaces Spectroscopie
Imaging Carbon materials with correlative Raman-SEM microscopy. Introduction. Raman, SEM and FIB within one chamber. Diamond.
Imaging Carbon materials with correlative Raman-SEM microscopy Application Example Carbon materials are widely used in many industries for their exceptional properties. Electric conductance, light weight,
Good Stewardship and Safe Nanomaterial Handling Practices for Graphene Products
Industrial Hygiene and Graphene Good Stewardship and Safe Nanomaterial Handling Practices for Graphene Products Industrial Hygiene and Graphene This webinar will: Describe the type and characteristics
Outline of the current status of measurement science: from the point of view of the International Vocabulary of Metrology (VIM)
Outline of the current status of measurement science: from the point of view of the International Vocabulary of Metrology (VIM) Luca Mari Università Cattaneo LIUC, Italy BEAR Seminar, University of California,
A Single Input Multiple Output (SIMO) Variation-Tolerant Nanosensor
Supporting Information A Single Input Multiple Output (SIMO) Variation-Tolerant Nanosensor Dong-Il Moon 1,2, Beomseok Kim 1,2, Ricardo Peterson 3, Kazimieras Badokas 1,4, Myeong-Lok Seol 1,2, Debbie G.
Optimization of MnO2 Electrodeposits using Graphenated Carbon Nanotube Electrodes for Supercapacitors
Optimization of MnO2 Electrodeposits using Graphenated Carbon Nanotube Electrodes for Supercapacitors Waleed Nusrat, 100425398 PHY 3090U Material Science Thursday April 9 th 2015 Researchers optimize the
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18437-1 First edition 2012-08-15 Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 1: Principles and guidelines
IS INTERNATIONAL STANDARD. Water quality - Determination of benzene and some derivatives - Part 1: Head-space gas chromatographic
INTERNATIONAL STANDARD IS0 114234 First edition 1997-06-I 5 Water quality - Determination of benzene and some derivatives - Part 1: Head-space gas chromatographic method &alit& de I eau - DBtermination
ISO INTERNATIONAL STANDARD. Steel and iron - Sampling and preparation of samples for the determination of Chemical composition
INTERNATIONAL STANDARD ISO 424 First edition 996-07-0 Steel and iron - Sampling and preparation of samples for the determination of Chemical composition Fon tes et aciers - Pr&vement et pr6paration des
A Reliable Supply Pla.orm for Graphene & non- carbon 2D Materials
A Reliable Supply Pla.orm for Graphene & non- carbon 2D Materials Andy Goodwin Commercial Director Advanced Materials Cambridge Graphene Technology Days 2015 3 rd CIR Graphene Business Conference, 6 November
SWCNT Based Interconnect Modeling Using Verilog-AMS
SW Based Interconnect odeling Using Verilog-AS Hafizur Rahaman, Debaprasad Das*, and Avishek Sinha Roy** School of VSI Technology, Bengal Engineering and Science University, Shibpur, India. Email: rahaman_h@it.becs.ac.in,
ISO 6388 INTERNATIONAL STANDARD. Surface active agents - Determination of flow properties using a rotational viscometer. Second edition
INTERNATIONAL STANDARD ISO 6388 Second edition 1989-11-15 Surface active agents - Determination of flow properties using a rotational viscometer Agents de surface - viscosimk tre ro ta tif Determination
ISO INTERNATIONAL STANDARD. Geographic information Metadata Part 2: Extensions for imagery and gridded data
INTERNATIONAL STANDARD ISO 19115-2 First edition 2009-02-15 Geographic information Metadata Part 2: Extensions for imagery and gridded data Information géographique Métadonnées Partie 2: Extensions pour
Electrical Conductive Adhesives with Nanotechnologies
Yi Li Daniel Lu C.P. Wong Electrical Conductive Adhesives with Nanotechnologies Springer 1 Introduction 1 1.1 Electronics Packaging and Interconnect 1 1.2 Interconnection Materials 11 1.2.1 Lead-Free Interconnect
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 217 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, ogic and
Control Engineering BDA30703
Control Engineering BDA30703 Lecture 2: Introduction to measurement and instrumentation Prepared by: Ramhuzaini bin Abd. Rahman Expected Outcomes At the end of this lecture, students should be able to;
Engineering Challenges in Quantum Dot Displays
Engineering Challenges in Quantum Dot Displays Any great technology that pushes the boundaries of performance also has a set of challenges to overcome. Quantum dot displays are not an exception. Whether
Industrial standardization and quantification of the carrier concentration in semiconductor devices using electric SPM
Paper Industrial standardization and quantification of the carrier concentration in semiconductor devices Takaya Fujita, 1 * Akiya Karen, 1,2 Hiroshi Ito 3 and Daisuke Fujita 4 1 Surface Analysis Laboratories,
Technical Data Sheet
URGOX TM (REDUCED GRAPHENE OXIDE) Technical Data Sheet PRODUCT AND COMPANY IDENTIFICATION Plot No 12A, KIADB Industrial Area, Survey No 85, Chokkahalli Village, Kasaba Hobli, Hoskote Taluk Bangalore (R)
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11359-2 First edition 1999-10-01 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature Plastiques
GRAPHENE CONNECT MATERIALS AND PRODUCTION
GRAPHENE CONNECT MATERIALS AND PRODUCTION PROGRAMME Monday 9 March 10:00 10:15 Introduction Helena Theander, Chalmers Industriteknik 10:15 11:00 State of the art popular presentation of graphene material
Graphene devices and integration: A primer on challenges
Graphene devices and integration: A primer on challenges Archana Venugopal (TI) 8 Nov 2016 Acknowledgments: Luigi Colombo (TI) UT Dallas and UT Austin 1 Outline Where we are Issues o Contact resistance
Nanomaterial based Environmental Sensing. Sung Ik Yang Kyung Hee University
Nanomaterial based Environmental Sensing Sung Ik Yang Kyung Hee University What is Nanotechnology? - understanding and control of matter at dimensions less than 100 nanometers- unique phenomena enable
Импакт-факторы зарубежных научных журналов по физике
Импакт-факторы зарубежных научных журналов по физике Импактфактор Название журнала п/п 1. REVIEWS OF MODERN 30.254 2. ASTROPHYSICAL JOURNAL SUPPLEMENT SER 14.428 3. MATERIALS SCIENCE & ENGINEERING R-REPORTS
DATA SHEET. 1N4001G to 1N4007G Rectifiers DISCRETE SEMICONDUCTORS May 24. Product specification Supersedes data of April 1992
DISCRETE SEMICONDUCTORS DATA SHEET handbook, 2 columns M3D6 Supersedes data of April 992 996 May 24 FEATURES Glass passivated High imum operating temperature Low leakage current Excellent stability Available
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61788-6 First edition 2000-12 Superconductivity Part 6: Mechanical properties measurement Room temperature tensile test of Cu/Nb-Ti composite superconductors Supraconductivité
Nanomaterials & Organic Electronics Group TEI of Crete
Nanomaterials & Organic Electronics Group TEI of Crete Dr. Emmanuel Kymakis Asc. Professor, Dept. of Electrical Engineering and Center of Advanced Materials & Photonics kymakis@staff.teicrete.gr http://nano.teicrete.gr/
Quantum Dot Technology for Low-Cost Space Power Generation for Smallsats
SSC06-VI- Quantum Dot Technology for Low-Cost Space Power Generation for Smallsats Theodore G. DR Technologies, Inc. 7740 Kenamar Court, San Diego, CA 92020 (858)677-230 tstern@drtechnologies.com The provision
Low Voltage Field Emission SEM (LV FE-SEM): A Promising Imaging Approach for Graphene Samples
Low Voltage Field Emission SEM (LV FE-SEM): A Promising Imaging Approach for Graphene Samples Jining Xie Agilent Technologies May 23 rd, 2012 www.agilent.com/find/nano Outline 1. Introduction 2. Agilent
ISO INTERNATIONAL STANDARD. Sample preparation Dispersing procedures for powders in liquids
INTERNATIONAL STANDARD ISO 14887 First edition 2000-09-01 Sample preparation Dispersing procedures for powders in liquids Préparation de l'échantillon Procédures pour la dispersion des poudres dans les