Uni-Flow Filter Drier
|
|
|
- Jonathan Perkins
- 5 years ago
- Views:
Transcription
1 STNDRD Uni-Flow Filter Drier The filter driers of series DTG are used in refrigeration system with unidirectional flow to absorb moisture and acid in the system and to filter out the impurities. FETURES High efficient in moisture absorption, filtering impurity, acid, paint remains and mud removal Hybrid desiccant durable and solid filter cores Filtering fineness: 20μm corrosion resistant painting can survive salt spray test of 500 hours. connection type: flare or solder General Specifications applicable for all common HCFC, HFC and CFC refrigerants such as: R22,, R404, R407C, R410, R507 Min./max. ambient temperature: -30 C to +55 C TECNHICL PRMETERS Desiccant Selection Table TS min./max.: -30 C / +120 C PS: 4,83 MPa Installation position: - Flow direction corresponds to the arrow - Preferably installed in liquid line Certifications: UL/CS and PED declaration Medium Type 80% 3 desiccant and 20% active alumina 100% 3 desiccant HFC pplicable pplicable Note: Refrigerant ¹ Oil ² HCFC pplicable pplicable CFC pplicable Not pplicable HC pplicable pplicable Mineral oil or pplicable pplicable Pure POE or PG pplicable pplicable POE or PG with additive Not pplicable pplicable 1) For CFC system, usage of core with alumina is recommended as a strong capability to absorb acid may be needed. 2) When the systems use oil with additive, it is not recommended to use a core with alumina.
2 Designation Legend Product Code DTG Filter Core E F Filter Drier Series Indicates unidirectional filter drier Structure and Material Loos core, 100%3Å desiccant Solid core, 100%3Å desiccant Loos core, 80% 3Å desiccant and 20% active alumina Solid core, 80% 3Å desiccant and 20% active alumina Internal Volume Expressed in [ inch³ ] Expressed in [ cm³ ] Size Pos. 5 shows "0": Solder Pos. 5 shows "4": SE Flare 02 1/4 1/4 25 5/ /8 3/8 04 1/2 1/2 05 5/8 5/8 06 3/4 3/4 07 7/8 7/ /8 - Size Pos. 5 shows "1": Solder Pipe Type 0 Solder with inch connections 1 Solder with metric connections 4 SE flare connections Version Number Description 001 Standard product
3 MODEL DESIGNTION EXMPLE Position Number ccording to Designation Legend DTG Unidirectional filter drier DTG Solid filter core with 100% 3Å desiccant DTG inch³ internal volume DTG When Pos. 5 is 1 : connection size 6mm DTG Solder connection metric DTG Standard product GENERL CHRCTERISTICS OF DTG- FILTER - FLRE CONNECTION Type of SE Flare ØD [ g ] PED Category DTG DTG flare 1/ ,0 112, ,3 DTG DTG flare 3/ ,0 125, ,3 DTG DTG flare 1/ ,2 123, ,3 DTG DTG flare 3/ ,2 136, ,3 DTG DTG flare 1/ ,8 143, ,3 DTG DTG flare 3/ ,8 157, ,3 DTG DTG flare 1/ ,8 165, ,3 DTG DTG flare 1/ ,6 167, ,3 DTG DTG flare 3/ ,6 180, ,3 DTG DTG flare 1/ ,6 188, ,3 DTG DTG flare 5/ ,6 198, ,3 DTG DTG flare 3/ ,6 198, ,3 DTG DTG flare 3/ ,5 250, ,3 DTG DTG flare 1/ ,5 258, ,3 DTG DTG flare 5/ ,5 268, ,3 DTG DTG flare 3/ ,5 268, ,3 DTG DTG flare 7/ ,5 280, ,3 DTG DTG flare 1/ ,0 262, ,3 DTG DTG flare 5/ ,0 271, ,3
4 GENERL CHRCTERISTICS OF DTG- FILTER - SOLDER CONNECTION Type pf connection Volumen Solder DØ [g] PED category DTG DTG DTG DTG solder 49 1/ ,0 102, ,3 DTG DTG DTG DTG solder 49 5/ ,0 102, ,3 DTG DTG DTG DTG solder 49 3/ ,0 103, ,3 DTG DTG DTG DTG solder 49 1/ ,0 113, ,3 DTG DTG DTG DTG solder 82 1/ ,2 113, ,3 DTG DTG DTG DTG solder 82 5/ ,2 113, ,3 DTG DTG DTG DTG solder 82 3/ ,2 114, ,3 DTG DTG DTG DTG solder 82 1/ ,2 124, ,3 DTG DTG DTG DTG30054 solder 82 5/ ,2 120, ,3 DTG DTG DTG DTG solder 131 1/ ,8 134, ,3 DTG DTG DTG DTG solder 131 5/ ,8 134, ,3 DTG DTG DTG DTG solder 131 3/ ,8 134, ,3 DTG DTG DTG DTG solder 131 1/ ,8 145, ,3 DTG DTG DTG DTG solder 131 5/ ,8 140, ,3 DTG DTG DTG DTG solder 262 1/ ,6 158, ,3 DTG DTG DTG DTG solder 262 5/ ,6 158, ,3 DTG DTG DTG DTG solder 262 3/ ,6 158, ,3 DTG DTG DTG DTG solder 262 1/ ,6 168, ,3 DTG DTG DTG DTG solder 262 5/ ,6 164, ,3 DTG DTG solder 262 3/ ,6 180, ,3 DTG DTG DTG DTG solder 262 7/ ,6 180, ,3 DTG DTG DTG DTG solder 492 3/ ,5 228, ,3 DTG DTG DTG DTG solder 492 1/ ,5 238, ,3 DTG DTG DTG DTG solder 492 5/ ,5 234, ,3 DTG DTG solder 492 3/ ,5 250, ,3
5 GENERL CHRCTERISTICS OF DTG- FILTER - SOLDER CONNECTION Type pf connection Volumen Solder DØ [g] PED category DTG DTG DTG DTG solder 492 7/ ,5 250, ,3 DTG DTG DTG DTG solder / ,5 260, ,3 DTG DTG DTG DTG solder 672 1/ ,7 242, ,3 DTG DTG DTG DTG solder 672 5/ ,7 238, ,3 DTG DTG DTG DTG solder 672 7/ ,7 254, ,3 DTG DTG DTG DTG solder / ,7 264, ,3 DTG DTG DTG DTG solder / ,5 393, ,3 DTG DTG DTG DTG solder / ,5 403, ,3 GENERL CHRCTERISTICS OF DTG-F FILTER - FLRE CONNECTION Type of Volume SE Flare [ g ] PED Category DTG-F DTG flare 49 1/ ,0 112, ,3 DTG-F DTG flare 49 3/ ,0 125, ,3 DTG-F DTG flare 82 1/ ,2 123, ,3 DTG-F DTG flare 82 3/ ,2 136, ,3 DTG-F DTG flare 131 1/ ,8 143, ,3 DTG-F DTG flare 131 3/ ,8 157, ,3 DTG-F DTG flare 131 1/ ,8 165, ,3
6 GENERL CHRCTERISTICS OF DTG-F FILTER - FLRE CONNECTION Type of Volume SE Flare ØD [ g ] PED Category DTG-F DTG flare 262 1/ ,6 167, ,3 DTG-F DTG flare 262 3/ ,6 180, ,3 DTG-F DTG flare 262 1/ ,6 188, ,3 DTG-F DTG flare 262 5/ ,6 198, ,3 DTG-F DTG flare 262 3/ ,6 198, ,3 DTG-F DTG flare 492 3/ ,5 250, ,3 DTG-F DTG flare 492 1/ ,5 258, ,3 DTG-F DTG flare 492 5/ ,5 268, ,3 DTG-F DTG flare 492 3/ ,5 268, ,3 DTG-F DTG flare 492 7/ ,5 280, ,3 DTG-F DTG flare 672 1/ ,0 262, ,3 DTG-F DTG flare 672 5/ ,0 271, ,3 GENERL CHRCTERISTICS OF DTG-F FILTER - SOLDER CONNECTION Type pf connection Volumen Solder DØ [g] PED category DTG-F DTG DTG-F DTG solder 49 1/ ,0 102, ,3 DTG-F DTG DTG-F DTG solder 49 5/ ,0 102, ,3 DTG-F DTG DTG-F DTG solder 49 3/ ,0 103, ,3 DTG-F DTG DTG-F DTG solder 49 1/ ,0 113, ,3 DTG-F DTG DTG-F DTG solder 82 1/ ,2 113, ,3 DTG-F DTG DTG-F DTG solder 82 5/ ,2 113, ,3 DTG-F DTG DTG-F DTG solder 82 3/ ,2 114, ,3 DTG-F DTG DTG-F DTG solder 82 1/ ,2 124, ,3 DTG-F DTG DTG-F DTG solder 82 5/ ,2 120, ,3 DTG-F DTG DTG-F DTG solder 131 1/ ,8 134, ,3 DTG-F DTG DTG-F DTG solder 131 5/ ,8 134, ,3 DTG-F DTG DTG-F DTG solder 131 3/ ,8 134, ,3
7 GENERL CHRCTERISTICS OF DTG-F FILTER - SOLDER CONNECTION Type pf connection Volumen Solder DØ [g] PED category DTG-F DTG DTG-F DTG solder 131 1/ ,8 145, ,3 DTG-F DTG DTG-F DTG solder 131 5/ ,8 140, ,3 DTG-F DTG DTG-F DTG solder 262 1/ ,6 158, ,3 DTG-F DTG DTG-F DTG solder 262 5/ ,6 158, ,3 DTG-F DTG DTG-F DTG solder 262 3/ ,6 158, ,3 DTG-F DTG DTG-F DTG solder 262 1/ ,6 168, ,3 DTG-F DTG DTG-F DTG solder 262 5/ ,6 164, ,3 DTG-F DTG solder 262 3/ ,6 180, ,3 DTG-F DTG DTG-F DTG solder 262 7/ ,6 180, ,3 DTG-F DTG DTG-F DTG solder 492 3/ ,5 228, ,3 DTG-F DTG DTG-F DTG solder 492 1/ ,5 238, ,3 DTG-F DTG DTG-F DTG solder 492 5/ ,5 234, ,3 DTG-F DTG solder 492 3/ ,5 250, ,3 DTG-F DTG DTG-F DTG solder 492 7/ ,5 250, ,3 DTG-F DTG DTG-F DTG solder / ,5 260, ,3 DTG-F DTG DTG-F DTG solder 672 1/ ,7 242, ,3 DTG- F DTG DTG-F DTG solder 672 5/ ,7 238, ,3 DTG-F DTG DTG-F DTG solder 672 7/ ,7 254, ,3 DTG-F DTG DTG-F DTG solder / ,7 264, ,3 DTG-F DTG DTG-F DTG solder / ,5 393, ,3 DTG-F DTG DTG-F DTG solder / ,5 403, ,3 SELECTION TLE Capacity [ kw ] Moisture bsorption (gram H 2 O) R404 R507 R22 R407C R410 R404 R507 R407C R410 R22 75 F 125 F 75 F 125 F 75 F 125 F 75 F 125 F 23,9 C 51,7 C 23,9 C 51,7 C 23,9 C 51,7 C 23,9 C 51,7 C DTG ,7 6,7 8,1 8,1 8,1 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,0 4,9 7,0 7,0 7,4 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,5 6,7 9,5 9,5 9,8 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,4 10,6 14,8 14,8 14,8 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,5 6,7 9,5 9,5 9,8 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4
8 SELECTION TLE Capacity [ kw ] Moisture bsorption (gram H 2 O) R404 R507 R22 R407C R410 R404 R407C R22 R507 R F 125 F 75 F 125 F 75 F 125 F 75 F 125 F 23,9 C 51,7 C 23,9 C 51,7 C 23,9 C 51,7 C 23,9 C 51,7 C DTG ,7 6,7 8,1 8,1 8,1 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,0 4,9 7,0 7,0 7,4 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,5 6,7 9,5 9,5 9,8 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,4 10,6 14,8 14,8 14,8 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,5 6,7 9,5 9,5 9,8 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,6 17,2 25,0 24,6 25,0 4,2 3,8 5,7 3,4 3,4 3,1 3,7 3,4 DTG ,4 6,0 8,4 8,4 8,4 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,0 4,9 7,0 7,0 7,4 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,9 7,4 10,9 10,9 11,3 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,9 16,9 24,3 23,9 24,6 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,9 7,4 10,9 10,9 11,3 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,3 17,9 25,7 25,7 26,0 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,8 24,6 35,5 35,2 35,9 11,6 10,9 17,7 10,2 10,9 9,5 11,4 9,7 DTG ,4 6,0 8,4 8,4 8,4 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,0 4,9 7,0 7,0 7,4 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,6 8,1 12,0 11,6 12,0 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,0 17,6 25,3 25,0 25,7 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,6 8,1 12,0 11,6 12,0 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,6 21,5 31,3 30,9 31,7 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,3 17,9 25,7 25,7 26,0 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,7 31,7 45,7 45,4 46,1 14,8 14,2 23,7 19,8 14,8 13,0 15,5 13,1 DTG ,9 7,7 11,3 10,9 11,3 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,4 6,0 7,7 7,4 7,7 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,6 8,1 12,0 11,6 12,0 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,7 17,9 26,0 26,0 26,4 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,6 8,1 12,0 11,6 12,0 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,4 22,9 33,1 32,7 33,8 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,7 17,9 26,0 26,0 26,4 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,3 30,6 43,6 43,6 44,3 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,4 22,9 33,1 32,7 33,8 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,4 32,7 47,1 46,8 47,8 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,7 31,7 45,7 45,4 46,1 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,1 33,4 48,2 47,8 48,5 20,6 19,5 33,2 18,3 20,6 17,6 20,9 17,7 DTG ,7 17,9 26,0 26,0 26,4 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,9 12,7 18,3 17,9 18,3 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,1 23,2 33,8 33,4 34,1 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,1 19,7 28,8 28,5 28,8 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,7 32,0 46,4 46,1 46,8 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1
9 SELECTION TLE Capacity [ kw ] Moisture bsorption (gram H 2 O) R404 R507 R22 R407C R410 R404 R407C R22 R507 R F 125 F 75 F 125 F 75 F 125 F 75 F 125 F 23,9 C 51,7 C 23,9 C 51,7 C 23,9 C 51,7 C 23,9 C 51,7 C DTG ,5 24,3 35,2 34,8 35,5 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,6 44,0 63,7 63,3 64,4 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,5 42,9 62,6 61,9 63,3 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,0 44,3 64,0 63,7 64,7 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,6 44,0 63,7 63,3 64,4 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,7 52,1 75,3 74,6 76,0 51,4 48,7 83,4 51,4 51,3 43,7 52,1 44,1 DTG ,2 24,6 35,9 35,5 36,2 63,7 59,7 103,5 55,7 63,7 58,9 70,2 59,4 DTG ,9 21,8 31,7 31,7 32,0 63,7 59,7 103,5 55,7 63,7 58,9 70,2 59,4 DTG ,8 42,9 61,9 61,5 62,6 63,7 59,7 103,5 55,7 63,7 58,9 70,2 59,4 DTG ,9 26,0 37,6 37,3 38,0 63,7 59,7 103,5 55,7 63,7 58,9 70,2 59,4 DTG ,4 63,7 91,8 91,4 92,8 63,7 59,7 103,5 55,7 63,7 58,9 70,2 59,4 DTG ,1 64,7 93,6 92,8 94,6 63,7 59,7 103,5 55,7 63,7 58,9 70,2 59,4 DTG ,4 64,0 92,8 91,8 93,9 123,3 115,6 200,3 107,9 123,3 114,0 135,8 114,9 DTG ,3 67,2 97,1 96,4 98,1 123,3 115,6 200,3 107,9 123,3 114,0 135,8 114,9 Note: The above data is based on filter driers with inch connections and clean system at ideal conditions; with impurities accumulated in the filter, the capacity may decrease. Selection Formulas Filter Driers for liquid line are manufactured in compliance with RI Standard 710. Maximum flow rate of liquid refrigerant at a differential pressure of 0,07bar (1psi) is indicated by kw (ton) which is based on the temperature of liquid refrigerant 30 C (86 F), the evaporating temperature of -15 C (5 F) and the following mass flow: 0,40 kg/min/kw (3.1 lb/min/ton) 0,53 kg/min/kw (4.1 lb/min/ton) R404, R507 0,39 kg/min/kw (3.0 lb/min/ton) R22, R407C 0,36 kg/min/kw (2.8 lb/min/ton) R410 Note: Data on water absorption is based on the following EPD (method: SHRE Standard 63.1): 60ppm R22 50ppm 50ppm R404 50ppm R407C 50ppm R410 50ppm R507
Eliminator Liquid line filter driers, Type DCL and DML
MAKING MODERN LIVING POSSIBLE Eliminator Liquid line filter driers, Type DCL and DML Flare connection Solder connection (copper) REFRIGERATION & AIR CONDITIONING DIVISION Technical leaflet Contents Page
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT CATALOGUE
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT CATALOGUE CA-STD- SUMMARY SANHUA Strive for perfection, Pursuit of excellence 4 WAY REVERSING VALVE SHF SERIES 4 WAY REVERSING VALVE
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
High pressure sight glass (PS = 52 bar) Types SGP N, SGP I and SGP X
MAKING MOERN IVING POSSIBE ata sheet igh pressure sight glass (PS = 2 bar) Types SGP N, SGP I and SGP X Sight glasses are used to indicate:. The condition of the refrigerant in the liquid line of the plant.
Sight Glass and Moisture Indicator Virginia KMP Series LDE
Sight Glass and Moisture Indicator Virginia KMP LDE DIMENSIONS: Dimension Dimension Connection Type "A" "B" Inches (mm) Inches (mm) LDE2 1/4 Male X 1/4 Male 2-7/8 72 1-7/ 36 LDE2S 1/4 Sweat X 1/4 Sweat
AIR CONDITIONING STANDARD COMMERCIAL REFRIGERATION HEAT PUMP PRODUCT CATALOGUE
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT CATALOGUE CA-STD-EN-R1013 SUMMARY SANHUA Strive for perfection, Pursuit of excellence 04 4 WAY REVERSING VALVE SHF SERIES 08 4 WAY
Accumulators Virginia KMP Suction Line Accumulators
Accumulators Virginia KMP Suction Line Accumulators The Virginia KMP suction line accumulator's purpose is to prevent excessive quantities of liquid refrigerant and oil from returning to the compressor.
MAKING MODERN LIVING POSSIBLE. Thermostatic expansion valve Type TUB/TUBE and TUC/TUCE REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Thermostatic expansion valve Type B/BE and C/CE REFRIGERATION AND AIR CONDITIONING Technical leaflet Thermostatic expansion valve, type B/BE and C/CE Contents Page Introduction........................................................................................
Thermostatic expansion valves TUA/TUAE
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves A/AE www.danfoss.com Thermostatic expansion valves, type A/AE Contents Page Introduction... Features... Standard range...
Thermostatic expansion valves TUB/TUBE and TUC/TUCE
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves B/BE and C/CE www.danfoss.com Thermostatic expansion valve, type B/BE and C/CE Contents Page Introduction........................................................................................
Solenoid valves Type EVUL
Data sheet Solenoid valves EVUL EVUL solenoid valves are designed to fit into compact refrigeration systems. Available in servo operated versions they can be applied in liquid, suction, and hot gas lines.
ZHEJIANG FOTECH INTERNATIONAL CO., LTD.
Company Profile Zhejiang Fotech International Co., Ltd is a leading manufacturer and supplier of Refrigerant Gases, Fluor Polymer and Fluor Rubber. Products that are inventoried include:r22, R32, R134A,
Product Data CNPVP, CNPVT, CNPVU, CNRVU EVAPORATOR COIL N COIL - CASED AND UNCASED UPFLOW, DOWNFLOW
CNPVP, CNPVT, CNPVU, CNRVU EVPORTOR COIL N COIL - CSED ND UNCSED UPFLOW, DOWNFLOW Product Data CNPVP CNPVT (Transition) CN(P,R)VU 06008 06007 06004 This vertical design N -coil is a furnace coil designed
Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with
Solenoid valve Types CSV 2 - CSV 22 (NC) and solenoid coil
Data sheet Solenoid valve s CSV 2 - CSV 22 (NC) and solenoid coil CSV is a direct or servo-operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. CSV valves are for
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
Product Data. CNPHP, CNRHP Evaporator Coil N Coil --- Cased Horizontal CNPHP / CNRHP
CNPHP, CNRHP Evaporator Coil N Coil --- Cased Horizontal Product Data 06005 This horizontal design N -coil is an evaporator coil designed to provide the highest standards of reliability and durability.
Product Data. CAPVU Evaporator Coil A Coil --- Uncased Upflow, Downflow CAPVU
CAPVU Evaporator Coil A Coil --- Uncased Upflow, Downflow Product Data CAPVU A06002 The CAPVU evaporator coils incorporate proven standards for reliable system operation and performance throughout the
ENVIRONMENTALLY SOUND R 410A REFRIGERANT
ENVIRONMENTALLY SOUND REFRIGERANT N4H3 Performance Series Product Specifications EFFICIENT 13 SEER HEAT PUMP ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1 phase,
Product Data. CNPVP, CNRVP, CNPVT, CNRVT, CNPVU, CNRVU Evaporator Coil N Coil Cased and Uncased Upflow, Downflow
CNPVP, CNRVP, CNPVT, CNRVT, CNPVU, CNRVU Evaporator Coil N Coil Cased and Uncased Upflow, Downflow Product Data CN(P,R)VP CN(P,R)VT (Transition) A06008 A06007 This vertical design N -coil is a furnace
AME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)
Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be
DESIGN AND COST ANALYSIS OF HEAT TRANSFER EQUIPMENTS
DESIGN AND COST ANALYSIS OF HEAT TRANSFER EQUIPMENTS Md. Khairul Islam Lecturer Department of Applied Chemistry and Chemical Engineering. University of Rajshahi. What is design? Design includes all the
MULTILAYER CERAMIC CAPACITORS
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC s MT
Metso Concentration Measurement 3300
Metso Concentration Measurement 3300 Metso Concentration 3300 Accurate direct in-line measurement The Concentration Measurement is provided with intelligent technology calculating the concentration of
R- 410A R-22 Size (tons) Shipping Weight (lbs) WLAU184AA 1-1/ WLAU182AA 1-1/ WLAU244AA. Model /2
EVAPORATOR COILS A COIL - UNCASED R- 410A or R- 22 SYSTEMS 1 1/2 5 Tons WLAU Use of the AHRI Certified TM Mark indicates a manufacturer s participation in the program. For verification of certification
Solkane 410 Thermodynamics
SOLVAY FLUOR SOLKANE - INFORMATION SERVICE Solkane 410 Thermodynamics SOLVAY FLUOR Technical Service - Refrigerants - Product Bulletin no.: T/09.04/04/E P.O. Box 0 Phone +49/511/857-653 3000 Hannover Fax
Multilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
HEAT CONTENT DECREASES U D R HEAT CONTENT INCREASESO. Btu/lb
Pressure (psia) LINES OF CONSTANT ENTHALPY PRESSURE P R E S S U R E R I S E S P R E S S HEAT CONTENT DECREASES U R E D R HEAT CONTENT INCREASESO P S Btu/lb Heat Content Pressure (psia) SATURATION CURVE
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
Telecommunications Pipe
Telecommunications Pipe About Poly Pipe Pty Ltd Located in the Hunter Valley, NSW, Australia, Poly Pipe Pty Ltd (Poly Pipe) has an ultra modern extrusion, high tech manufacturing facility. It supplies
TELUX LED FEATURES APPLICATIONS WAVELENGTH
TELUX LED DESCRIPTION 19232 The is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed
Conductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
Multi Layer Ceramic Capacitor
Description MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. POE s MLCC
INTEGRATED CIRCUITS. For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
INTEGRTED CIRCUITS DT SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications Dual D-type flip-flop with set and reset; Supersedes data of September
Core. Topic 1: Stoichiometric relationships. Essential idea: Physical and chemical properties depend on the ways in which different atoms combine.
Core 32 Essential idea: Physical and chemical properties depend on the ways in which different atoms combine. 1.1 Introduction to the particulate nature of matter and chemical change Nature of science:
ENH4X. Product Specifications HORIZONTAL EVAPORATOR COILS ALL CASED N COIL MODELS WARRANTY*
ENVIRONMENTALLY SOUND REFRIGERANT ENH4X Product Specifications HORIZONTAL EVAPORATOR COILS ALL CASED N COIL MODELS 2 thru 5 Tons Available for environmentally sound R 410A systems Copper tube / aluminum
INTEGRATED CIRCUITS. For a complete data sheet, please also download:
INTEGRTED CIRCUITS DT SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS
3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH)
. INTRODUCTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type MT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
HIGH POWER THICK FILM CHIP FIXED RESISTOR
HIGH POWER THICK FI CHIP FIXED RESISTOR 2W High power up to 2W Current detecting resistors for power supply, motor circuits ROHS Compliant with RoHS directive etc Halogen free requirement Switching Power
B6VMAX Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS
TECHNICAL SPECIFICATIONS B6VMAX Series Air Handler with TXV 13-19 SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) R-410A Refrigerant The B6VMAX Series of air handlers, when combined
APPENDIX B ABBREVIATIONS, SYMBOLS AND CONVERSION FACTORS Abbreviations
APPENDIX B ABBREVIATIONS, SYMBOLS AND CONVERSION FACTORS Abbreviations A ampere AASHTO American Association of State Highway & Transportation Officials ABS (%) Percent of Absorbed Moisture Abs. Vol. Absolute
Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
GB5BM Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Air Handler WARRANTY
TECHNICAL SPECIFICATIONS GB5BM Series Air Handler 13 SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) The GB5BM Series of air handlers, when combined with our heat pump or air conditioner,
APPENDIX H CONVERSION FACTORS
APPENDIX H CONVERSION FACTORS A ampere American Association of State AASHTO Highway & Transportation Officials ABS (%) Percent of Absorbed Moisture Abs. Vol. Absolute Volume ACI American Concrete Institute
This Specification is for the supply of sands, crushed rock and crushed scoria to Melbourne Water work sites.
Melbourne Water SANDS, CRUSHED ROCK AND CRUSHED SCORIA SPECIFICATION 21.A.038 1 GENERAL This Specification is for the supply of sands, crushed rock and crushed scoria to Melbourne Water work sites. 2 SOURCES
END4X, ENW4X, ENA4X. Product Specifications VERTICAL EVAPORATOR COILS ALL N COIL MODELS CASED N COILS UNCASED N COILS ENA4X WARRANTY*
ENVIRONMENTALLY SOUND REFRIGERANT VERTICAL EVAPORATOR COILS ALL N COIL MODELS 1½ thru 5 Tons Available for environmentally sound R 410A systems Copper tube / aluminum fin N coil with latest high tech fin
THE ENERGY 68,SAVING TDVI. exible Combine Modular 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 HP 60, 62, 64, 66 HP
I N V E RT E R ion Range exible Combine Modular TDV I TDV I TDV I INVERTER INVERTER INVERTER 14, 16, 18, 20, 22 HP TDV I 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 HP INVERTER INVERTER INVERTER TDV I INVERTER
NPG-151 IPC-4101C//127
New: 2014/04/30 Glass cloth base epoxy resin flame retardant copper clad laminate NPG-151 FEATURES Halogen, antimony, and red phosphorous free Flammability meets UL 94 V-0 Excellent thermal resistance
Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors
FEATURES High-frequency circuits Temperature compensating High stability Space saving. APPLICATIONS In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability and/or
MX Series COMPACT AND USER FRIENDLY. Metal Tube Type Variable Area Flowmeter OUTLINE STANDARD SPECIFICATION MODEL CODE MX-400, MX-71 MX-52E
OMPT ND USER FRIENDLY MX Series Metal Tube Type Variable rea Flowmeter OUTLINE MX Series flowmeter is the metal tube type variable area flowmeter having the unified face-to-face dimension. The compact
NP-175FR. High luminance of multi-functional epoxy contrast with copper
New: 2018/09/12 Flame retardant copper clad laminate NP-175FR Characteristics Unit Conditioning Typical Values SPEC Test Method Volume resistivity MΩ-cm C-96/35/90 5 x10 9 ~ 5x10 10 10 6 2.5.17 Surface
NPGN-150R. FEATURES Halogen, antimony, and red phosphorous free Flammability meets UL 94 V-0 NAN YA PLASTICS CORPORATION
NAN YA PLASTICS CORPORATION Issured : 2010-09-01 flame retardant copper clad laminate Flammability meets UL 94 V-0 Excellent long term reliability UV blocking type NPGN-150R Reactive type flame retardants
II/IV B.Tech (Regular) DEGREE EXAMINATION. (1X12 = 12 Marks) Answer ONE question from each unit.
Page 1 of 8 Hall Ticket Number: 14CH 404 II/IV B.Tech (Regular) DEGREE EXAMINATION June, 2016 Chemical Engineering Fourth Semester Engineering Thermodynamics Time: Three Hours Maximum : 60 Marks Answer
SCIENCE EXPERIMENTS VARIABLES (DESIGNING AN EXPERIMENT) 3 TYPES OF VARIABLES 3 TYPES OF VARIABLES 2/8/2017
SCIENCE EXPERIMENTS VARIABLES (DESIGNING AN EXPERIMENT) SNC1DB Most experiments in science are controlled studies: experiments which look at the relationship between two variables Variable: any factor,
SIZING 2 E DEFINITIONS AND UNITS OF MEASUREMENT 2.1 CALCULATION OF THE ACCUMULATOR 2.2
SIZING 2 E 01-12 DEFINITIONS AND UNITS OF MEASUREMENT 2.1 CALCULATION OF THE ACCUMULATOR 2.2 DEFINITIONS AND UNITS OF MEASUREMENT 2.1 E 01-12 2.1.1 DEFINITIONS Po = nitrogen pre-charge pressure (relative
TYPE EMC. Thermostatic Expansion Valve
TYPE EMC Thermostatic Expansion Valve with ODF Solder or SAE Flare Connections for Refrigerants,, 4a, 404A, 502 & 507 BULLETIN --4 June 1995 The Sporlan Type EMC thermostatic expansion valve (TEV) is a
Thermochemical Storage Technologies
Thermochemical Storage Technologies Andreas Hauer Ecostock 2006, Stockton, New Jersey, USA Content Thermal energy storage technologies Direct / indirect thermal energy storage Thermochemical Storage: Closed
Electro - Principles I
Electro - Principles I Capacitance The Capacitor What is it? Page 8-1 The capacitor is a device consisting essentially of two conducting surfaces separated by an insulating material. + Schematic Symbol
INTEGRATED CIRCUITS. For a complete data sheet, please also download:
INTEGRTED CIRCUITS DT SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS
High Performance Air Filter TDF15A ~ 300A
igh Performance ir ilter T ~ 00 I ORMN IR ILTR LIMINTS RMUL TILS IN T OMSS IR, TIVT RON SORNT ILTRS R LSO VILL. ILTRS SIN TO WORK UNR IIULT ONITIONS. P P P PU S T T igh efficiency ilter elements offers
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
CIGRE SC A2 & D1 JOINT COLLOQUIUM 2011, KYOTO JAPAN. Water Saturation Limits and Moisture Equilibrium Curves of Alternative Insulation Systems
CIGRE SC A2 & D1 JOINT COLLOQUIUM 2011, KYOTO JAPAN http://cigre2011-a2d1.org/ CIGRE A2 & D1 2011 Doshisha University, Kyoto PS2: Materials Water Saturation Limits and Moisture Equilibrium Curves of Alternative
Glide Effect on Performance
Glide Effect on Performance ASHRAE, January 2016 Bachir Bella Regis Leportier* ASERCOM Azeotropic Mixtures The azeotropic (refrigerant) mixtures are usually binary mixtures that behave like a pure fluid
Solenoid valve Types EVR 2 - EVR 40
Data sheet Solenoid valve s EVR 2 - EVR 40 EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with HCFC and HFC refrigerants. EVR valves are supplied complete or as
SEM-2017(03HI MECHANICAL ENGINEERING. Paper II. Please read each of the following instructions carefully before attempting questions.
We RoU No. 700095 Candidate should write his/her Roll No. here. Total No. of Questions : 7 No. of Printed Pages : 7 SEM-2017(03HI MECHANICAL ENGINEERING Paper II Time ; 3 Hours ] [ Total Marks : 0 Instructions
EFFICIENT 13 SEER HEAT PUMP ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1 phase, 60 Hz
ENVIRONMENTALLY SOUND REFRIGERANT N4H3 Performance Series Product Specifications EFFICIENT 13 SEER HEAT PUMP ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1 phase,
THERMOPHYSICAL PROPERTIES. Final Report. 1 January March Richard F. Kayser
DOE/CE/23810-16 THERMOPHYSICAL PROPERTIES Final Report 1 January 1992-31 March 1993 Richard F. Kayser Thermophysics Division Building 221, Room A105 National Institute of Standards and Technology Gaithersburg,
Making Decisions with Insulation
More on Heat Transfer from Cheresources.com: FREE Resources Making Decisions with Insulation Article: Basics of Vaporization Questions and Answers: Heat Transfer Experienced-Based Rules for Heat Exchangers
Chartered Institute of Building Service Engineers (CIBSE) code for interior lighting design
Chartered Institute of Building Service Engineers (CIBSE) code for interior lighting design The maintenance factor gives an estimate of how lighting conditions will deteriorate through everyday use. Dust
SM-42/43 SURFACE MOUNT CERMET TRIMMERS COPAL ELECTRONICS S M - 4 T W Ω ( ) FEATURES PART NUMBER DESIGNATION.
SURFCE MOUNT CERMET TRIMMERS RoHS compliant INTERNL STRUCTURE 9 8 7 FETURES Lead-free soldering, Cadmium-free Fine adjustment is available utomatic mounting is available (Taping) Reflow soldering is available
ANSI/AHRI Standard (Formerly ARI Standard ) 2006 Standard for Performance Rating of Desuperheater/Water Heaters
ANSI/AHRI Standard 470-2006 (Formerly ARI Standard 470-2006) 2006 Standard for Performance Rating of Desuperheater/Water Heaters IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does
Fitting PS P - B - R2
INTERNAL STRUCTURE PS86 (G 3/8) 2 3 FEATURES Solidstate pressure switch with no mechanical moving parts Isolated output via a photo-coupler Switching pressure adjustable and hysteresis band adjustable
Marine Systems. Air Intake Systems. Camfil - clean air solutions
Marine Systems Camfil Farr Segment brochure Air Intake Systems Camfil - clean air solutions Military Patrol Boat Weather Louvre 65 Cruiser Seabourn Legend Weather Louvre 65 + 185 Passenger Ship Color Fantasy
PRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
NP-180R. U.L. file number E98983
New: 2018/09/12 Flame retardant copper clad laminate NP-180R High Tg 175 (DSC) Excellent dimensional stability through-hole reliability Excellent electrical, chemical and heat resistance properties IPC-4101E
Data Sheet / Instructions. Dewpoint MeterO
Data Sheet / Instructions Dewpoint MeterO Dewpoint Meter ISO 8502-4: Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness.
3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA. 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA
Page of 8 3M Pak 50 Boardmount Socket, P50 series P50-XXXS-XXX-EA 3M Pak 50 Boardmount Plug, P50 series P50-XXXP-XXX-EA Product Specification 78-50-0-7 Revised 08-09- Page of 8 Table of Contents Title
Test report CVN Project number Page 2 of 2
Project number 604545 Page 2 of 2 Tests : Results : The diaphragm gas meters as specified in annex 2 were tested for compliance with the European Standard BS EN 1359 : 1999 "Gas meters - Diaphragm gas
RS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
Thermal Analysis by Conduction Convection and Radiation in a Power Cable
IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE) e-issn: 2278-1676,p-ISSN: 2320-3331, Volume 9, Issue 3 Ver. II (May Jun. 2014), PP 51-56 Thermal Analysis by Conduction Convection and
SPECIFICATIONS PARTICLE SENSOR KS-28B Higashimotomachi, Kokubunji, Tokyo , Japan
SPECIFICATIONS PARTICLE SENSOR KS-28B 3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan No. 99020-4E 07-04 Printed in Japan Outline The KS-28B is a particle sensor designed to measure the number
Super High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
LMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
CR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL
AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL FILE No. A10-023-1 REVISION 1 : Mar.2012 Re-edit version.( file volume down) Contents have NOT been changed. Model name: RAS-M10PKVP-E RAS-M13PKVP-E RAS-M16PKVP-E
PYRIPROXYFEN TECHNICAL
WHO/IS/TC/715/2001 TECHNICAL TECHNICAL 1. Specification 1.1 Description Interim specification WHO/IS/TC/715/2001 The material shall consist of pyriproxyfen together with related manufacturing impurities.
Odor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
Heat Transfer Predictions for Carbon Dioxide in Boiling Through Fundamental Modelling Implementing a Combination of Nusselt Number Correlations
Heat Transfer Predictions for Carbon Dioxide in Boiling Through Fundamental Modelling Implementing a Combination of Nusselt Number Correlations L. Makaum, P.v.Z. Venter and M. van Eldik Abstract Refrigerants
The Basic Capacitor. Water Tower / Capacitor Analogy. "Partnering With Our Clients for Combined Success"
CAPACITOR BASICS I How s Work The Basic A capacitor is an electrical device which serves to store up electrical energy for release at a predetermined time. In its most basic form, it is comprised of three
TECHNICAL BRODIFACOUM
BRODIFACOUM Full specification: Approved 10 December 1999 1. Specification 1.1 Description The material shall consist of brodifacoum together with related manufacturing impurities and shall be in the form
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
Percentage tp the rated volt. Temperature ( )
1 Instructions for handling For use of any type of capacitor, you are recommended to obtain individual specification in advance and use it within the limits specified thereby. Use beyond such limits may
Product Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
E 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.