Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
|
|
- Primrose Freeman
- 5 years ago
- Views:
Transcription
1 1 11mm Size ompact and highly reliable type available in many varieties. Typical Specifications Output signal Items Specifications Two phase of, B Three phase of, B and (1H) Self-return switch (11 / 10B) etector Product Line Structure onfiguration Length of Torque Number of the shaft (mn m) detent (L 1 ) (mm) Number of pulse Rating Operating life m V 1,000 cycles,000 cycles (1H) 0,000 cycles (1K / 1J) Operating temperature range 40 to + 8 -on switch Travel of Operating Minimum order unit(pcs.) push-on life switch(mm) (cycles) Japan xport Product No. rawing No. ncoders Package 1B12 1 Horizontal 12 ± ,400 1B1242 1B1242F 2 3 Flat ± ± ± ± ± ,000 1,0 2, BS 11244G U Q 11244B ± ± 1G414 Less shaft wabble Serrated 2 8. ± 12 ± ,000 2,000 1G G K0401 1K1401 Flat 12 ± ,000 1,000 2,000 1K K K K12401 Note Other varieties are also available. Please inquire. Refer to P.1 for product specifications. Refer to P.1 for attached parts. Refer to P. for product varieties. Refer to P.13 for soldering conditions. 11
2 1 11mm Size Product Line etector Structure configuration Length of Torque Number the shaft (mn m) of detent (L 1, L 2 ) (mm) Number of pulse -on switch Travel of Operating Minimum order unit(pcs.) push-on switch life (mm) (cycles) Japan xport Product No. rawing No. ncoders Package Reflow lock Flat -tooth Serrated ± ± , ,00 1J0404 1J140F 1J J J J T40 112U Selfreturn switch 1 3 to Self-return switch , H B switch Flat ± B switch 0. 1.,000 1,0 2,400 1H H H H ualshaft Slotted Inner-shaft=2 Outer-shaft=1 Flat nner-shaft=2 1. Slotted Self-return Outer-shaft=1 3 to switch Note Other varieties are also available. Please inquire , ,400 1BB B2LB01 1 Packing Specifications Tray Product No. 1B 10 / 1 / / 1H 1G / 1K 1J 00 1,0 1,000 0 Number of packages(pcs.) 1,400 2,400 2, xport package measurements (mm) T / U 800 1, B / BB 1 case / Japan 1 case / export packing 1,0 00 2,400 1,
3 11mm Size 1 imensions No. Photo Style P board mounting hole dimensions (Viewed from mounting side) etector 1 1B Horizontal MG0. 4. ø B 3-ø1 holes ncoders Package 1B Horizontal (travel 0.mm) G 3 1B Horizontal (travel 1.mm) G B 2. -ø1 holes ummy ø1 holes 1 (travel 0. / 1.mm) B 2. -ø1 holes 3.8 -ø1 holes 13
4 1 11mm Size imensions etector No. Photo Style P board mounting hole dimensions (Viewed from mounting side) ncoders 1G ummy terminal ø1. ø2 8± (SW01) ø 2 (.) 0 ±2 0.x4 HM 1.max ø2.0 hole R0.8 enter of shaft ø1 holes Package ±0.03 8±0.0 1G (travel 1.mm) 1. (SW02) (.) ø2.0 hole R0.8 enter of shaft ø1. ø2 2. 8± (SW01) ø 0 ±2 1 0.x4 HM.max ø1 holes 8 1G (travel 1.mm) ø2 ø ±0.1 ±0.03 (SW02) ±0.0 ø (SW01) 0 ±2 2 (.) 1 0.x4 HM 1..max ø2.0 hole R enter of shaft ø1 holes ±0.03 8±0.0 1K ummy terminal () ummy terminal () 4.4 ø. 1.2 ø8. R0. ø ø. 1K0 only R0.8 1K0 ø2.1hole 1. only R0.8 ø2.1hole B 1. -ø1.0holes 1K1 B 2-R0.8 only 1. Black part : o not solder -ø1.0holes and 1K1 no wiring for electrical 2-R0.8 contact. only K (travel 0.mm / 1.mm) (Switch02) (Switch02) () 24. () 0.or ø. 0.or ø. 1.2 ø8. 3. R ø P board mounting detail slant line part hows the solder land black part: o 1K0 not solder and wiring for electrical only contact R0.8 ø2.1hole K1 only ø1.0holes 2-R0.8 Black part : o not solder and no wiring for electrical contact. B 14
5 1 1 11mm Size 1 imensions No. Photo Style P board mounting hole dimensions (Viewed from mounting side) etector J Reflow 1J (travel 0.mm / 1.mm) 112T -lock mechanism (ummy terminal) (Switch02) ummy terminal () ø () ø8. ø or1. ø. 4.4 Total travel Lock travel. max R0. 2-R0. ø2.1hole ø2.1hole -1.3 B R0.8 B 1J1 1. only 2-R J1 only 1. slant line part:the solder land Black part: o not P solder board and mounting wiring for detail electrical contact slant line part hows the solder land black part: o not solder and wiring for electrical 12. contact ummy 1. ø.4 hole ncoders Package ±0.1 teeth Serrated teeth Serrated ± ø1 holes ø±0.0 ø8± U -lock mechanism with push-lock switch. (Switch02) 2.4 Total travel Lock travel ø1 holes 11 Self-return switch 12. ummy J0 only B B 2-R0.8 1J1 1. only 2-R J1 only 1. slant line part:the solder land Black part: P o not board solder mounting and wiring for detail electrical contact slant line part hows the solder land black 1J0 part: o not solder 13and wiring 1J0 only for electrical 2-R contact 13 only ø2.1hole 2-R ø2.1hole max ±0.1 teeth Serrated teeth Serrated ±2.2 ø±0.0 ø8±0.0 B -ø1 holes 1
6 1 11mm Size etector imensions No. Photo Style 11 Self-return switch (travel 0.mm / 1.mm) P board mounting hole dimensions (Viewed from mounting side) ncoders Package 1. B 2. -ø1 holes 1 1H B switch (travel 0.mm / 1.mm) (Switch02) 2 ø 3. R0. 0. or ø. max B F F 1 ual-shaft type (travel 0.mm) Inner shaft: encoder Outer shaft: encoder ' ' B' B F ø1 holes 2-ø2.3 holes B 8-ø1 holes 1 1 ual-shaft type (travel 1.mm) Inner shaft: encoder Outer shaft: self-return switch (Switch03) ø (Switch02) ø3. ø max. 11. ' ' B' ' ' B' B ø1 holes 1
7 11mm Size ncoders / Product Specifications Output Wave 1B / 1 / 1G 1 / 1J / 1K 1H etector 1B, 1, 1G detents, 1 pulse signal B signal etent stabillity position W direction etent stability position cannot be specified for B signal. 1 detents pulse 1 3 detents pulse 1J, 1K signal B signal W direction etent stabillity position signal B signal signal ncoders Sliding Noise etailed dimensions Package Test circuit V R R Terminal Terminal B ncoder Terminal /s V Output waveform t t V1 V2 Sliding direction t : Masking time to avoid chattering 1B 1 / 1G 1J / 1K V 1 =V 2 =1.V max. t R = kω hattering:2ms max. Bounce :2ms max. V 1 =V 2 =1.V max. t R = kω hattering:3ms max. Bounce :2ms max. V 1 =V 2 =2.V max. t R = kω hattering:3ms max. Bounce :2ms max. Test circuit B switch 1H t R = kω hattering:ms max. Bounce :ms max. Test conditionrotation speed ircuit iagram 11/10B 11mm Size ncoders / ttached Parts The following parts are included with the product. 1B Series Hexagonal nut ø12 ø.2 Flat washer 1
8 11mm Size ncoders / Product Varieties etector imensions 1. Single-shaft (1K is excluded. Refer to P.212 for 1K) 1)Serrated 1 onfiguration( diameter:φ ) Not applicable for 1 and 1G with push-lock mechanism LB L1 R2 R1 0. or 1 teeth Serrated etailed dimensions L 1 L B R 1 R 2 S ø S1 ncoders ø Package 1K / 1J onfiguration( diameter:φ ) LB L1 0. l1 teeth Serrated ø etailed dimensions L 1 L B R 1 1 ø8. 2)Flat 1 onfiguration( diameter:φ ) 1K / 1J onfiguration ( diameter:φ.) LB L1 ø R ø R 1 2 etailed dimensions L 1 L B R 1 1 () (12) oes not comply with 11 2 L B = for 1B. Values in parentheses apply to products without push-on switch. etailed dimensions L 1 L B R 1 imensions marked with ( ) apply to products without push-on switches. 3)Slotted 1 onfiguration( diameter:φ ) L1 LB 1. etailed dimensions ø 1 0. ø L L B = for 1B. L B 1K / 1J onfiguration ( diameter:φ.) etailed dimensions L 1 1 L B Notes 1.The highlighted figures in shaft types refer to Product Specifications in P.11 and P Other varieties are also available. Please inquire.
9 11mm Size ncoders / Product Varieties 2. Standard imensions and configuration of ual-shaft 1)Flat onfiguration(inner-shaft : φ 3. Outer-shaft : φ ) L1 etector LB L2 R2 2 R ø3. ø 0. etailed dimensions L 2 L B L 1 R 1 R ncoders ø8 for type with inner / outer shaft encoders (1BB) Package Notes 1. The highlighted figures in shaft types refer to Product Specifications in P Other varieties are also available. Please inquire. 1
10 ncoders List of Varieties shaft mm size 11mm size Series 0 1B 1 1G Photo Output Incremental(Two phase and B ) types Single-shaft ual-shaft Single-shaft Operating direction Horizontal Number of pulse / Number of detent imensions (mm) 1 / Features - - / 1 / or / 3 or detent -lock mechanism 11. W / or - Less shaft wobble H / etector ncoders Package Operating temperature range 40 to + 8 Operating life 1,000 cycle utomotive use Life cycle (availability) lectrical performance Mechanical performance Rating Max./min. operating current (Resistive load) Insulation resistance Voltage proof Rotational torque ( detent) 0V for 1 minuteor or V for 1s m V m / 1m 0M Ω min. V mn m 0V for 1 minute or V for 2s - 8. ± mn m etent torque 8 ± mn m 12 ± mn m ± mn m 12 ± mn m -pull strength configuration Flat Flat, Slotted, Serrated Terminal type Switch type ontact arrangement -on switch 0N Insertion -lock mechanism switch Single pole and single throw(-on) Inner-shaft:Flat Outer-shaft:Slotted -on switch Serrated Travel (mm) 0. ± ± ± 0. 0.±0.3 1.±0. 8±0.8 0.±0.3 1.±0. 1.±0.3 Switch Specifications Operating force (N) ± 2 ± 3 ± 2 4 ± 2 8 max. 4 ± 2 ± Rating m V 0.1 V (00μ V min. ratings) ontact resistance Operating life,000 0mΩ max. for initial period; 0m Ω max. after operating life. 2,000,000,000,000 Page 11 ncoders Soldering onditions 13 ncoders autions 14 Notes 1. marked specification is only applicable to 112U indicates applicability to all products in the series. 1
11 ncoders List of Varieties etector ncoders Package shaft 11mm size mm size Series 11 1H 1K 1J / RK3 MB Photo Output types Operating direction Number of pulse / Number of detent imensions (mm) Features Self-return switch - Incremental (Three phase, B and ) B / B / Incremental(Two phase and B ) Single-shaft / 1 / Surface Mount / 40 / 40 - Magnetic type; L indicator option W H Operating temperature range 40 to + 8 to + 80 to + 0 Operating life 1,000 cycles,000 cycles 0,000 cycles,000 cycles 00,000 rotations utomotive use - Life cycle (availability) lectrical performance Mechanical performance Rating m V 1m V m V±% Max./min. operating current m / 1m - 1m / (Resistive load) Insulation resistance 0M Ω min. V MΩ min. 0V 0MΩ min. V Voltage proof 0V for 1 minute or V for 2s 0V for 1 minute or V for 1s 0V for 1 minute or 0V for 2s 0V for 1 minute or V for 2s Rotational torque ( detent) 3 to mn m - mn m max. etent torque - ±mn m 12 ± mn m 40±mN m 8±mN m -pull strength configuration Flat, Slotted, Serrated Flat Terminal type Insertion Reflow Insertion Switch type 0N -on switch ontact arrangement Single pole and single throw(-on) Travel (mm) 0. ± ± ± ± ± ± ± ± Switch Specifications Operating force (N) Rating ontact resistance Operating life ± 2 4 ± 2 ±2 4±2 ±2 4±2 ± V (00μ V min. ratings), V (0.1m V min. ratings) 0. 1V (1m 1V min. ratings) 0mΩ max. for initial period; 0m Ω max. after operating life. 1,000,000 0,000 1,000,000 0,000, V 2,000 Page ncoders Soldering onditions 13 ncoders autions 14 Note indicates applicability to all products in the series. 1
12 ncoders Soldering onditions Reference for Hand Soldering 1J Series 0, 0,, 11, 1B, 1, 1G, 1K, 2, 2,,, 21, 28, 3, 3H, 3B, 40, 4, 0, 0, MB Tip temperature Soldering time No. of solders max. 3s max. 1 time +1 ± 3 s 2 time 0 etector ncoders Reference for ip Soldering Series 0, 1B, 11, 1, 1G, 1K,,, 21, 28, 3, 3H, 3B, 0 Preheating ip soldering No. of solders Soldering temperature Heating time Soldering temperature Soldering time 0 max. 2 min. max. ± ±1s 2 time max. Package, 2, 2 0 max. 1 min. max. ± 3±1s 2 time max max. 1 min. max. max. s max. 1 time 4, 0 0 max. 2 min. max. max. s max. 2 time max. MB 80 max. 1 min. max. max. 3s max. 2 time max. ondition for Reflow Temperature profile Temperature ( ) B Room temperature Time (s) Pre-heating max. F max. G max. H max. 1J 0 Series B F G H No. of reflows min.max. 3s 40s 4 min. max 2 time max. min. 2 min. 0 0s to 1s ー s to 40s ー 2 time max. Notes 1.When using an infrared reflow oven, solder may sometimes not be applied. Be sure to use a hot air reflow oven or a type that uses infrared rays in combination with hot air. 2.The temperatures given above are the maximum temperatures at the terminals of the potentiometer when employing a hot air reflow method. The temperature of the P board and the temperature of the potentiometer may vary greatly depending on the P board material, its size and thickness. nsure that the temperature of the potentiometer does not rise to or greater. 3.onditions vary to some extent depending on the type of reflow bath used. Be sure to give due consideration to this prior to use. 13
Compact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size Compact and highly reliable type available in many varieties Typical Specifications Items Specifications ncoders Product Line Structure Horizontal configuration Length of the shaft (mm) Torque
More informationRing encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life
E E mm Size encoder with mm height contribute to space saving and multifunctioning Typical Specifications Items Specifications Product Line Structure Dip ctuator l e n g t h(m m) Reflow Detent torque (mn
More informationInsulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.
ECE ECD mm Size shaft type with a wide variety of applications Typical Specifications Items Specifications Rating Operating life Without detent With detent 0.m V DC m V DC,000 cycles 0,000 cycles (Lightest
More information9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
K09 9mm Size Multi-ganged 9.mm width potentiometer ideal for various s of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage 0V C, V DC Total rotational angle 3
More informationMinimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications. Total resistance tolerance ±20%
RS K Master (K Fader) Minimum lever wobble and high precision characteristics combined with good operational feel Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V
More informationLow-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product
RS NS Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product Typical Specifications Items Specifications tolerance ±0% Maximum
More information16mm Size Metal Shaft Type
Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational
More informationA wide variety of detector switches available for various Digital AV devices. Typical Specifications
Switch wide variety of detector switches available for various Digital V devices. Typical Specifications Items Rating max. min. Resistive load Contact resistance Initial /fter operating life Operating
More information1.4(H)mm, 1.5/2mm-travel Surface Mount Type. A low-profile slide switch with 1.4mm thickness. Typical Specifications
SSSS8.(H)mm, /mm-travel Surfae Mount Type low-profile slide swith with.mm thikness Produt Line (mm) tuator diretion Vertial tuator thikness (mm) t Poles Positions Typial Speifiations Changeover timing
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationRotary Switches AC09, 16 and 32
09, 16 and 32 igital code output type escription FUJI series rotary switches offer a wide choice of output codes. They feature sliding u-flashed contacts for high contact reliability. Inhibitor and parity
More informationUser friendly mm type, available in a wide variety. Typical Specifications. Rating (max.) Rating (min.) Initial contact resistance
SKHH 6mm Square ( ) Product Line Top push type Product SKHHAJA00 SKHHALA00 SKHHAQA00 SKHHAKA00 SKHHAMA00 SKHHARA00 SKHHCQA00 SKHHCRA00 SKHHBVA00 SKHHBWA00 SKHHBYA00 SKHHANA00 SKHHAPA00 SKHHBSA00 SKHHDTA00
More informationULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V
TN ULTR-SLIM POLRIZED RELY TN-RELYS 4....8.8 SPEIFITIONS ontact rrangement Initial contact resistance max. (y voltage drop ) ontact material Rating power UL/S rating Expected life (min. operations) switching
More informationChip Trimmer Potentiometer
Chip Potentiometer RH0/RH0 Series A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationBase S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
More informationMinimum lever wobble and high precision characteristics combined with good operational feel.
for Fader Control of s Master Type K Fader RS K Series Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications Items tolerance Specifications
More information3R3K SPECIFICATION FOR APPROVAL. Wound Chip Inductor. Ⅰ. Configuration and dimensions: Ⅲ. General specification: REF. : WL (Series) PROD.
SPEIFIIO FOR PPROVL Ⅰ. onfiguration and dimensions: ME REV. 201715-L PE 1/8 Marking Inductance code H F F E I I ( P Pattern ) 4. ±0.3 3.20 ±0.2 3.20 ±0.2 4.20 ±0.2 E 1.20 F +0.3-0.0 2.20 H 1.60 Unit:m/m
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More information3.5(H)mm, 2mm-travel Type
Swith (H)mm, mm-travel Type SSSS Series Exellent appliation for designing ompat and high density portable devies. Detetor Typial Speifiations Items Rating/min. Resistive load Contat resistane Initial performane/fter
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationSpecifications J series Part Number Rated urrent Resistivity Working J03 (0201 Type) J05 (0402 Type) 0.5(70 ) 1(70 ) How to alculate Rated Voltage Pow
Structure and material imensions c d Specifications L c d W T Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Resin Resistor Type(I Size)
More informationInsertion-type Trimmer Potentiometer Bulk
type PotentiometerBulk RH0 Series A mm size that is suitable for a wide range of applications for consumer/industry equipment. Car Use Features Applications Available for a wide range of applications.
More informationProvides a superior operational feel with high-speed tracking in motor drive mode.
for Fader Control of s Motor-driven Master TypeMotor N Fader, Motor K Fader RSNM/RS0KV Series Provides a superior operational feel with high-speed tracking in motor drive mode. Features Motor driven, low-profile
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More information1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental
TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter
More informationTolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog. (See note 10) Others tapers on request
Bushless version P- FETURES mm arbon Potentiometer arbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to ) Self extinguishable material U -V0 Upon request: Metalic support
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationData Sheet. DIP-Switch DAS. Technical Data. Dimensions. Order Number Configuration
DIP-Switch DS DIP-switch with to 0 positions Flat slides with protective foil or raised slides Contacts have self cleaning function Insulation resistance (at 00 VDC) Test voltage ( minute) switches (at.000
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationLow-profile type with excellent operability contributes to add flexibility in set design.
for Fader Control of s Low-profile Master TypeN Fader RSN Series Low-profile type with excellent operability contributes to add flexibility in set design. Features Excellent operational feel from less
More informationPTF Series Long Life Slide Potentiometer
*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationPTL Series Slide Potentiometer w/led
*RoHS COMPIANT Features n Carbon element n Red, orange, green, amber and white colors n Center detent option n Assortment of resistance tapers n Various travel lengths n Various lever sizes PT Series Slide
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationRF (Radio Frequency) C R 20 Type
RF (Radio Frequency) C R Type (by) PhotoMOS RELAYS.±..69±.8.±..7±.8.±..8±.8 mm inch FEATURES. Low output capacitance between output terminals and low ON-resistance capacitance(c):.pf (typ.) ON resistance(r):
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationConnector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More informationFEATURES. Tolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog.
Bushless version MHNIL SPIFITIONS Mechanical rotation angle: 300 ± lectrical rotation angle: ± Torque: 0. to. Ncm. (0.7 to 2. in-oz) Stop torque: > 0 Ncm. ( > in-oz) Max. torque nut (binding out): < 0
More informationT-16 FEATURES. Taper. A= linear B= Log. C= Alog. (See note 10) Others laws upon request. Tolerance 2020= +/-20% 3030= +/-30% (See note 5)
T-6 FTUR 6 mm arbon Potentiometer arbon resistive element. High mechanical endurance. Upon request: etents tereo matching witch Nut & washer MHN PFTON Mechanical rotation angle: 300 ± lectrical rotation
More informationSC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
More informationApplication Guidelines
Application Guidelines PERFORMANCE CHARACTERISTICS SUNIL ELECTRONICS IND. CO., LTD. Application Guidelines SUNIL ELECTRONICS IND. CO., LTD. Application Guidelines When using Plastic film capacitors, pay
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationCS Series. Capacitance Type. Type. Proximity Sensor. Features
INFORMATI Series Features Capacitance Type - Metal cylinder/resin cylinder/square type - Non-metal objects such as wood, paper, plastic and water can be detected. - The operating distance is adjustable
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More informationMLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/11 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationMLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/10 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
More informationPLASTIC FILM CHIP CAPACITOR TYPE ECHU1(C) Operating temperature range
1/ 16 P. 1. SCOPE This specification covers the requirement for metallized polyphenylene sulfide dielectric fixed chip capacitor for use in inverter circuit for LCD back light and use in electronic equipments.
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationFig. 1. Two common types of van der Pauw samples: clover leaf and square. Each sample has four symmetrical electrical contacts.
15 2. Basic Electrical Parameters of Semiconductors: Sheet Resistivity, Resistivity and Conduction Type 2.1 Objectives 1. Familiarizing with experimental techniques used for the measurements of electrical
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More information10 mm carbon potentiometer PT10
0 mm carbon potentiometer PT0 Main features Carbon resistive element. Dust proof enclosure. Polyester substrate. Wiper positioned at initial, 0% or fully clockwise. Mechanical specifications Mechanical
More informationRedline Unibis : the solution Circuit protection
2 circuits in 1 mo Redline Unibis : the solution ircuit protection Unibis compact Ms are one of the latest introductions in the Redline range and are developed to reduce the size of the distribution board
More informationSingle Socket and Horizontal Metering
idwest lectric Products Single Socket and Horizontal etering G pproved Single Socket etering G pproved pplication Information idwest s Single Socket etering products are designed for residential use. They
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationPLASTIC FILM CHIP CAPACITOR TYPE ECHU(X)
1 / 17 P 1. SCOPE This specification covers the requirement for metallized polyphenylene sulfide dielectric fixed chip capacitor for use in electronic equipments. 2. PRODUCT NAME Plastic film chip capacitor
More informationFeatures (Compare to our current 42 & 56 square size motors)
Features The best magnetic balance is employed in our round type stepping motor. Motor performance is greatly improved using the latest technology of three dimensional magnetic field analysis and robust
More informationPRODUCT SPECIFICATION
SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER
More informationSpezifikation Z56-xx Series ZIF FFC/FPC Connector 0,5mm Pitch Double Contact H1,96mm Piano
1 Scope This Specification covers the construction and characteristics of 0,5mm Pitch FFC and FPC (Flat Flexible Cable and Flat PCB Cable ) of Z56-xx ZIF Connector Series. The part shall satisfy the following
More informationReference Specification
Reference Specification High Voltage Ceramic Capacitor DHRB5AD221M1CB Issued Date: November 14, 2012 Product specifications in this drawing are subject to change or our products described in this drawing
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationTolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog. (See note 10) Others tapers on request
Bushless version P- FETURES mm arbon Potentiometer arbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to ) Self extinguishable material U -V0 Upon request: Metalic support
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More informationDDR4 SODIMM Socket 0.5mm Pitch 260Pos
1. Introduction 1.1 Testing was performed on DDR4 SODIMM SOCKET 260P to determine if it meets the requirement of Product Specification, 108-115122 Rev.A. 1.2 Scope This report covers the electrical, mechanical
More informationReference Specification
Reference Specification High Voltage Ceramic Capacitor DHRB34C221M1FB Issued Date: March 18, 2014 Product specifications in this drawing are subject to change or our products described in this drawing
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationMolding Power Inductor
Marking Outline: Magnetic shielded structure: excellent resistance to electro magnetic interference(emi). A composite structure, ultra low buzz noise. Low loss, high efficiency, wide application frequency.
More informationT-21 FEATURES. Taper. A= linear B= Log. C= Alog. (See note 10) Other tapers on request. Value. (See note 4)
T- FETURES mm arbon Potentiometer arbon resistive element. High mechanical endurance. Upon request: Detents Stereo matching Switch MEHNI SPEIFITIONS Mechanical rotation angle: ± Electrical rotation angle:
More informationApproval Sheet. for. Carbon Film Resistors. CFR series YAGEO CORPORATION
Approval Sheet for Carbon Film Resistors CFR series ±2% & ±5% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Shin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-4286 URL:
More informationNTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
More informationTerminal Block Accessories
Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationRFB Series (High R.C., Long Life) MERITEK
FEATURES Low impedance and long life withstanding 10000 hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Operating Temp Range Rated Working Voltage Capacitance
More informationSelector Switch Type 06
Seletor Swith Type 0 Compat and versatile positions multi wafer seletor swith,000 swithing yles with up to.0 Nm swithing torque Gold plated ontats: miron Roust metal housing with metal shaft Operating
More informationSPECIFICATION FOR APPROVAL
Ⅰ. onfiguration and dimensions: ' 'S WG NO. SF090 P - REV. 0008- PGE H I.0 ref..70 ref. F E.0 ref. 9.60 ref. ( P Pattern ) Unit:m/m ' E F H I 9.00±0. 7.0 typ. 5.0±0..70± 5. typ..5 typ. 0. typ..75 typ.
More informationCS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION
ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationselector switch type 06
seletor swith type 0 main features ompat and versatile 2 positions multi wafer seletor swith Compat and versatile 2 positions multi wafer seletor swith 2,000 swithing yles with up to.0 Nm swithing torque
More informationChapter 33 - Electric Fields and Potential. Chapter 34 - Electric Current
Chapter 33 - Electric Fields and Potential Chapter 34 - Electric Current Electric Force acts through a field An electric field surrounds every electric charge. It exerts a force that causes electric charges
More information0.5 (.020) (.051) 0.2 (.008) min 0.2 (.008) min
With Nickel Barrier Termination NB 12 - NB 20 Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. They are widely used for temperature compensation
More informationFeatures of Uni-Thermo
Pelti ier Device in the 21st Uni-Thermo Century Hi eliability NTENTS Comparison with a Conventional Peltier Device. The Result of Operating Reliability Test Peltier Device Uni-Thermo Quality Chart Peltier
More informationSUNSTAR 传感与控制 TEL: FAX: Hall Sensor As of Nov SUNSTAR 自动化
As of Nov. 2004 E-MAIL: INTRODUCTION is a magnetic sensor using Hall effect, generating output voltage directly proportional to magnetic field. FEATURE AND APPLICATION Feature - SAMSUNG is highly sensitive
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
More informationBOURNS INDUCTIVE COMPONENTS
HISTORY LIST REV. DTE DESRIPTION PPROVED HEKED DRWN 0091008 Released 0100511 Modify the operature temperature 01014 Modify the specification form D 010611 dd Inductance 181Y E 015084 Modify Reliability
More informationLow-Power, High-Speed CMOS Analog Switches
Low-Power, High-Speed MOS Analog es G41/43/4 ESRIPTION The G41/43/4 monolithic analog switches were designed to provide precision, high performance switching of analog signals. ombining low power (.3 µw,
More information