Specifications J series Part Number Rated urrent Resistivity Working J03 (0201 Type) J05 (0402 Type) 0.5(70 ) 1(70 ) How to alculate Rated Voltage Pow
|
|
- Delphia Foster
- 5 years ago
- Views:
Transcription
1 Structure and material imensions c d Specifications L c d W T Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Resin Resistor Type(I Size) R03, J03(0201) R05, J05(0402) RuO2 Resistor (The same material of Termination for chip jumper) Substrate 96% lumina Termination Silver Plating (Ni, Sn) Pla. Thick Film hip Resistors (R, J Series) How to Order R J - H q w e r t qseries R : Resistor J : Jumper wsize(i) eresistance Value(3 digits or 4 digits) x. 562 : =5600Ω 4021 : =4020Ω hip Jumper : 000 rtolerance J ±5% lank Jumper chips F ±1% tpackaging H Taping Paper φ178 2mm 10,000pcs W L c d T 0.30± ± ± ± ± ± ± ± ± ±0.05 Series Rated Power Max. Working Voltage Resistance Tolerance Resistance Value Range Working R03(0201) 0.05(1/20)W 15V J: ±5% 10Ω to 1MΩ R05(0402) (1/16)W 50V F: ±1% 10Ω to 1MΩ 55 to +125 J: ±5% 1.0Ω to 10MΩ
2 Specifications J series Part Number Rated urrent Resistivity Working J03 (0201 Type) J05 (0402 Type) 0.5(70 ) 1(70 ) How to alculate Rated Voltage Power Ratio(%) = P R : Rated Voltage (V) P : Rated Power (W) R : Standard Resistance Value (Ω) Rated voltage should be lower than max working voltage mbient Temp ( ) erating urve Rated power should be reduced as below when temperature become higher. Under high temperature, power derated as follows: Standard Resistance Value to Thick Film hip Resistors (R, J Series)
3 lectrical haracteristics Item Resistance haracteristics Short-time Overload Intermittent Overload ielectric Withstanding Voltage Insulation Resistance Resistance(Ω) R <10 10 R 1M 1M< R Standard Test onditions Resistor Jumper Resistor Jumper Within Initial Tolerance TR(ppm/ ) to to to +300 ±(2.0%+0.10Ω)max intermittent overload ±(5%+0.1Ω)max R03, J03 : 10 8 Ωmin R05, J05 : 10 8 Ωmin Test onditions and Standards R, J series Power ontdition (20, 65%RH) Test : 25,125( ) =R 2 R 1 /R 1 1/T 2 T : Temp. oefficient (ppm/ ) T 1 : 25( ) T 2 : 125( ) R 1 : T 1 Resistance at (Ω) R 2 : T 2 Resistance at (Ω) (1) pply 2.0 rated voltage for 5sec. (2.5 rated voltage for rrays) (2) Wait 30minutes (3) Measure resistance R03: 30Vmax R05: 50Vmax (1) Perform 00voltage cycles as follows: ON(2.0 rated voltage, 2.5 for rrays ) 1sec. OFF 25sec. (2) Stabilization time 30min without loading (3) Measure resistance R03: 30Vmax R05: 50Vmax (1) 2 for 5sec. (J03: 1) (2) Wait 30minutes (3) Measure resistance (1) Perform 00 current cycles as follows: ON(2) 1sec. OFF 25sec. (2) Wait 30minutes (3) Measure resistance J03: 1 max pply 300V for 1sec (R03 50V/1min.) pply V. (R03 50V)
4 Mechanical haracteristics Terminal Strength Item Soldering Heat Resistance Solderability nti-vibration Test Solvent Resistance ±(1%+0.05Ω)max ±(1%+0.05Ω)max ±(1%+0.1Ω)max ±(0.5%+0.05Ω)max nvironmental haracteristics Item ycle Low Storage High Storage Moisture Resistance Life Test Loading Life in Moisture Standard after loading No evidence of leaching overage 95% each termination end ±(1%+0.05Ω)max ±(2%+0.1Ω)max Standard Test onditions pply the load as show: Measure resistance during load application ending in 10seconds R P board: Glass epoxy t=1.6 Immerse into molten solder at 260±5 for 10±1sec. Stabillize component at room temperature for 1hr. Measure resistance. Immerse in Rogin Flux for 2±0.5 sec. and in SN62 solder at 235±5 for 2±0.5 sec. 2 hrs. each in X, Y and Z axis. (TTL 6hrs.)10 to 55 Hz sweep in 1min.at 1.5mm amplitude. Immerse in static state butyl acetate at 20 to 25 for 30±5sec. Stabillize component at room temperature for 30min then measure Value. 3 (φ5) Test onditions ±2max Resistor Jumper Resistor Jumper Test onditions and Standards R, J series Resistor Jumper Resistor Jumper Unit: mm 1) Run 5cycles as follows: 55±3 for 30min. 125±3 for 30min. Room temp for 10-15min. 1) well in 55 chamber without loading for 0 hrs. 1) well in 125 chamber without loading for 0 hrs. 1) well in temp: 65 RH90 to 95%RH chamber without loading for 0 0 hrs. 1) Temp: 70±3 Voltage: (rated voltage) on 90 min off 30min. uration: 0 0 hrs. 1) Temp: 40±2 RH: 90-95% Voltage ycle: on 90 min(rated voltage) off 30min. uration: 0 0 hrs. 0 0
5 Tape & Reel Reel arrier Tape( 8mm) arrier Tape(12mm) R J J Taping Quantity per reel F H G F H G W t T t K ode W t R Width: 8mm φ178±2.0 φ50min. φ13.0±0.5 φ21.0± ± ±1.5 Width: 12mm 13.0±1.5 imension TYP ode imension ode TYP (Unit : pcs) 2.5MX. 1.0 F G H J t 0.40± ± max. 0.65± ± ± ± ± ± ± ± ± ± ± ±0.1 φ ± ± ± ± ± ± ± max. 1.1max. F G H J T K 2.9± ± ± ± ± ± ± ±0.2 TYP Series Paper(φ178 reel) 0201 R03 00(2mm pitch) 0402 R05 00(2mm pitch) 0404 R112, T1 00(2mm pitch) 0804 R24, R24 00(2mm pitch) 0805 LR (4mm pitch) 1206 LR (4mm pitch) 1506 R (4mm pitch) 1020 LR (4mm pitch) 1608 RN4 4000(4mm pitch) 2512 LR (4mm pitch) 2506 R (4mm pitch) Thick Film hip Resistors Tape & Reel 12.0± ± ± ± ± ± φ max. 1.4max.
6 Recommended Land Patterns is referred the following for example hip Type rray Type R24 Series a 0.5 d Solder resist c b Series a b c d R R R R T RN48 Series 0.5 Recommended Land Patterns I Size
7 ircuit design Soldering method 1) Once application and assembly environments have been checked, 1) Recommendable temperature profile the resistors may be used in conformance with the catalog and the reflow specifications. 2) Please consult the manufacturer in advance when the resistors is used in devices such as: devices which deal with human life, I.e. medical devices; devices which are highy public orientated; and devices which demand a high standerd of liability. 3) Please use the resistors in conformance with the operating temperature provided in both the catalog and the specifications. 4) Please keep voltage under the rated voltage which is applied to the resistor. 5) o not use the resistor in an environment where it might easily exceed the respective provisions concerning shock and vibration specified in the catalog and specifications. 6) Please do not use the resistor in the following environments. qstate that water, oil, and solvent hang in resistor wstate where poisonous gas (sulfur and chlorine, etc.) exists estate that direct sunshine, radiation, and ultraviolet, etc. are irradiated 7) There is a thing that resistance changes according to the stuff of the resin when the coating with the resin is given. Please use resin coating after confirming the characteristic. 8) There is a thing that resistance changes according to flux and cleaner. Please use flux and cleaner after confirming the characteristic. 9) Please consult about a lead free products. Storage 1) Keep storage place temperature +5 to +35, humidity 45 to 75% RH. 2) Please keep parts out of poisonous gas such as sulfur or chlorine in the air, and out of salty moisture. Or they may cause rust of terminal, and poor solderability. and, please consider the abovementioned item after mounting your company. 4) Soldering iron 2) Recommendable temperature profile (aution) ooling after soldering should be as slow as possible. nsure that the chip Resistor is preheated adequately. nsure that the temperature difference( T) does not exceed 130. soldering iron 300±5 * 0 (Time) Time 3 sec. max. * 90±30 sec. *o not place the soldering iron on the chip. Soldering iron is 30W max. Temp( ) wave 50 0 Temp( ) preheat 230 to sec. 60 sec. 10 sec. max. preheat T 230 to to 120 sec. 3 sec. max. 3) pb-free recommendable temperature profile reflow Temp( ) preheat to to 3 /sec. 50 Peak temperature 250 ±5 5 to 10 sec. max. More than sec. max. Precautions More than sec. max. (Time) (Time)
Thick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationUsing special passivation material, and has good moisture resistance, corrosion resistance, high reliability.
-TH HIGH STILITY THIN FILM HIP FIXED RESISTOR - TH SERIES Features ( 0.0%; ppm/ ) Low TR and high accuracy( 0.0%; ppm/ ) Suit for re-flow and wave soldering With good sufuration-resistant perfornance ROHS
More informationSULFURATION-RESISTANT CHIP RESISTOR
FEATURES ROHS ith good sulfuration-resistant performance Miniature and light weight. Suit for reflow and wave flow solder. Stable electrical capability, high reliability. Low assembly cost, suit for automatic
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationCal-Chip Electronics, Incorporated TC Series Tantalum Solid Electrolytic Capacitors - Resin Molded Chip Type, Standard Type
: The T Series is designed for hybrid circuit and low profile printed circuit board applications where inductance is to be minimized, or where substrate space is at a premium. They can be attached to substrates
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationCR-PF Series Ultra-Low Lead Content Thick Film Resistor
RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationMODEL BCN SERIES. Thick Film Chip Resistor Arrays. 4-5 Model BCN Series
MODE N SERIES Thick Film hip Resistor rrays MODE STES Edge Finish / Termination Scalloped Square Square Model (idth) # of Resistors ircuit Industry Size onvex onvex oncave Model N 102 (1.0mm) 2 Isolated
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationWLPM Series SMD Molded Power Inductors
WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217 Features 1. Shielded construction. 2. Ultra
More informationLead-Free Current Sensing Resistors RLS Series ( Halogen-Free )
page 1/8 1. Scope: This specification applied to the products of Lead-Free current sensing resistor of metal foil for Lead-Free RLS series manufactured by TA-I TECHNOLOGY CO.,LTD. 2. Type Designation:
More informationApplications: MCY 4C 3 B 103 K 500 C T. Two significant digits followed by no. of zeros. And R is in place of decimal point.
Description: WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes
DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays
More information3R3K SPECIFICATION FOR APPROVAL. Wound Chip Inductor. Ⅰ. Configuration and dimensions: Ⅲ. General specification: REF. : WL (Series) PROD.
SPEIFIIO FOR PPROVL Ⅰ. onfiguration and dimensions: ME REV. 201715-L PE 1/8 Marking Inductance code H F F E I I ( P Pattern ) 4. ±0.3 3.20 ±0.2 3.20 ±0.2 4.20 ±0.2 E 1.20 F +0.3-0.0 2.20 H 1.60 Unit:m/m
More informationSafety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
More informationHigh Precision Thick Film chip resistors. Size 1206, 0805, 0603, 0402, 0201
WK2K, WK08K, WK06K, WK04K, WK02K ±.0%, ±0.5% Thick Film TC50/TC00 High Precision Thick Film chip resistors Size 206, 0805, 0603, 0402, 020 Page of 7 ASC_WKxxK_V07 NOV- 205 FEATURE. SMD Thick film resistor
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationApplications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationPrecision Thin Film Nichrome Chip Resistors
Resistors Precision Thin Film Precision thin film technology Extended ohmic range 1R M Precision to ±0.01% and ppm/ Passivated range for superior humidity performance oad life stability and humidity to
More informationScalloped Square Square Model (Width) # of Resistors Circuit Industry Size Convex Convex Concave
MODE N SERIES N Series Thick Film hip Resistor rrays RoHS ompliant MODE STES Edge Finish / Termination Scalloped Square Square Model (idth) # of Resistors ircuit Industry Size onvex onvex oncave Model
More informationSURFACE MOUNT RESISTOR RM Series: Thick Film 0.01~100M Ω RoHS
RM Series: Thick Film 0.0~00M Ω RoHS INTRODUCTION RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationMULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
More informationSURFACE MOUNT RESISTOR RM Series: Thick Film 0.01~100MΩ RoHS
RM Series: Thick Film 0.0~00MΩ RoHS INTRODUCTION RFE International, Inc. offers a wide range of chip resistors to meet your application requirements. They are made with metal glazed thick film on a high
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationWF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5%, ±0.1% Thick film high precision chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC_WFxxH_V02
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationMicrowave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationFrelTec GmbH. Thick Film Chip Resistor SMD Low Ohm
GmbH Mathildenstr. 10A 82319 Starnberg Germany Thick Film Chip Resistor SMD Low Ohm 9/10/2012 1/13 GmbH www.freltec.com SPECIFICATION Part Number 016 05 * 001k * J * T05 ** *** Type Size Value Tolerance
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationAnti-surge Chip Resistors
Anti-surge hip Resistors Datasheet Features 1) Exclusive resistive element pattern and laser trimming technology results in significantly improved surge resistance characteristics. 2) 2kV to 5kV electrostatic
More information3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
More informationMultilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More informationMultilayer Ceramic Chip Trimmer Capacitors
Series Four asic Types: -P - -1-1 S-P -P S- - S-P1.5 -P1.5 S-P -P Philips djust. Setting drift 1% w/ Philips djust. Low profile w/ Philips djust. everse ultra thin w/ Philips djust. How To Order: 03 1
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationSHENZHEN MOTTO TECHNOLOGY CO., LTD
-V2 20.11.26 Page : 1 Features & pplication: Product Structure * SMD Drum he for power line / signal line of various size SMD DIP Shield Unshield * ow Profile even 3x3x1.4 mm and low cost * To help you
More information(E-24 ): T.C.R (ppm/ ) Three digits (E-24 series):the first two digits are significant figures and the third one denotes number of zeros.
GENERL HIK FILM HIP FIXED RESISOR General hick Film hip Fixed Resistor Features Miniature and light weight Suit for reflow and wave flow solder, Stable electrical capability,high reliability, Low assembly
More informationApproval sheet WF10A. 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W. *Contents in this sheet are subject to change without prior notice.
WF10A 1%, 5% Ultra High Power Chip Resistors Size 1210, 3/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10A_V02 MAY - 2016 FEATURE 1. High reliability and stability
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationProdukt Information. Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) Scope. Features. Applications. Construction
Scope Ultra Low Ohm (Metal Strip) Chip Resistor (LR Series) -This specification applies to all sizes of rectangular-type fixed chip resistors with alloy as mater. Features -High power rating up to 3 Watts
More informationMULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
More informationSpecification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
More informationPREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationHigh Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
More informationMULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationSURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
More informationULTRA-SLIM POLARIZED RELAY. Initial breakdown voltage* 2. Unit weight. Ex. TN 2 L2 H 12V
TN ULTR-SLIM POLRIZED RELY TN-RELYS 4....8.8 SPEIFITIONS ontact rrangement Initial contact resistance max. (y voltage drop ) ontact material Rating power UL/S rating Expected life (min. operations) switching
More informationEN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at www.hest ore.hu. Description: MLCC consists of a conducting material and electrodes. To manufacture
More informationCurrent Sensing Resistor Shunt Type >SMS Series. General. Application
Page: 1/ 7 General Chip size from 2512 to 5931 Resistance value from 0.2m to 4m Low thermal EMF Low TCR Lead free, RoHS compliant for global pplications and halogen free pplication Switching model power
More informationDN/DR. Multilayer Ceramic Chip Capacitors. Features. Structure. series. series. Arrays. Smoothing. series. series. series. series. series.
yocera's of are designed to meet a wide variety of needs. We offer a complete range of products for both general and specialized applications, including the general-purpose M, the high-voltage, the low
More informationSurface Mount UV LED. NUVA33 Series PART NUMBERING SYSTEM. WAVELENGTH CODES Code Nominal Wavelength
FEATURES SURFACE MOUNT 3.4mm x 3.4mm x 2.37mm WAVELENGTH 365 ~ 45nm FOR UV CURING, PHOTO CATALYST & SENSOR LIGHTING RoHS COMPLIANT COMPATIBLE WITH REFLOW SOLDERING TAPE AND REEL PACKAGING SPECIFICATIONS
More informationNP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationCurrent Sensing Resistor Shunt Type >SMS Series
Page: 1 of 6 General Chip size from 3921 to 5931. Resistance value from 0.2m to 3m Low thermal EMF. Low TCR. Lead free, RoHS compliant for global. pplications and halogen free. pplication Switching model
More informationDATA SHEET Anti-Sulphur Thick Film Chip Resistor SAS(A/B) Series
DATA SHEET Anti-Sulphur Thick Film Chip Resistor SAS(A/B) Series 0.5% TO 5.0%, TCR -200 TO +400 SIZE: 0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant May 08, 2017 V.4 Page: 2 of 1. SCOPE 1.1 This
More informationSUNSTAR 传感与控制 TEL: FAX: Hall Sensor As of Nov SUNSTAR 自动化
As of Nov. 2004 E-MAIL: INTRODUCTION is a magnetic sensor using Hall effect, generating output voltage directly proportional to magnetic field. FEATURE AND APPLICATION Feature - SAMSUNG is highly sensitive
More informationSMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
More informationMulti-layer ceramic chip capacitors
Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic
More informationMULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5 CLASS II: HIGH DIELECTRIC CONSTANT TYPE... 6 X5R Series... 6 TEST SPEC.... 7 PACKAGE...
More informationMF-MSMF Series - PTC Resettable Fuses
*RoHS OMPLINT & E PPROVED Features ompliant with E-Q00 Rev-- Stress Test Qualification for Passive omponents in utomotive pplications 00 % electrically compatible with all previous generations of 8 SMT
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationProsperity Dielectrics Co., Ltd. PDC. No.148, Chang-An Rd., Sec.1, Lu-Tsu Shiang, Taoyuan, Taiwan FPFL-Rev.7.
High-Power Low Lead Free Chip Resistors 1. SCOPE..2 Purpose..2 Configuration.... 2 Part Number.....2 2. PERFORMANCE CHARACTERISTICS....3 2.1 Power Derating Curve by Ambient Temperature....3 2.2 Mechanical
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationFIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationSPECIFICATIONS FOR UPEC SMD TYPE WHITE LED
SPEIFIATIONS FOR UPE SMD TYPE WHITE LED MODEL: Features P-L-2 package Wide viewing angle Inter reflector Available on tape and reel ( 8mm Tape ) Package Dimensions Part NO. hip Material Lens olor Source
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 4012X - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
More informationMultilayer Ceramic Capacitors
Multilayer Ceramic Capacitors Super Low Distortion Multilayer Ceramic Capacitors, Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted
More informationAnti-Surge THICK FILM CHIP FIXED RESISTOR
Anti-Surge THICK FILM CHIP FIXED ESISTO FEATUES Miniature and light weight. Suit for reflow and wave flow solder. High power,substantially increase the ability of anti-surge Stable electrical capability,
More informationSPECIFICATIONS. Endrich Bauelemente Vertriebs GmbH. Thick film chip thermistor TATEYAMA KAGAKU IND. CO., LTD. 1 / 7. Customer. Code No.
Customer Endrich Bauelemente Vertriebs GmbH 1 /7 SPECIFICATIONS Code No. Type: TFT6G(2.00mm1.25mm) (Sn Plating) TFT3G(1.60mm0.80mm) (Sn Plating) TFT16G(1.00mm0.50mm) (Sn Plating) If you find herein anything
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More information