Using special passivation material, and has good moisture resistance, corrosion resistance, high reliability.

Transcription

1 -TH HIGH STILITY THIN FILM HIP FIXED RESISTOR - TH SERIES Features ( 0.0%; ppm/ ) Low TR and high accuracy( 0.0%; ppm/ ) Suit for re-flow and wave soldering With good sufuration-resistant perfornance ROHS ompliant with RoHS directive Halogen free requirement TH High Stability Thin Film hip Fixed Resistor - TH Series Using special passivation material, and has good moisture resistance, corrosion resistance, high reliability. pplications / Medical Equipment Test/Measurement Equipment Printer Equipment utomatic Equipment ontroller onverters ommunication Device Mobile phone etc. Designation TH E 0 G 03 T Product TH TH Series Thin Film hip Fixed Resistor Power Rating D E F G R Power rating 1/32W 1/16W 1/W 1/8W 1/4W 1/2W 1/3W H 3/4W onstruction Dimensions Dimensions T..R D E F G H T..R ( ppm/ ) Resistance Value eramic Substrate ottom Electrode Top Electrode Edge Electrode arrier Layer External Electrode Nir Resistor Layer Passivation Protective oating Unit:mm L W t a b digit Example: R K Resistance Tolerance D F Tolerance 0.0% 0.1% 0.% 0.% 1% T Packaging Style Packaging Style Tape & Reel ase

2 Derating urve 0-70 Percent Rated Load mbient temperaturt( ) Operating Temperature Range: - 70 ( ) Note: For resistors operated in ambient over 70,rated load(rated power) shall be derated in accordance with the above figure. Ratings Standard electrical specifications 70 ( ) Item Rated Power at 70 (note) Limiting Element Voltage Max.Overload Voltage /32W V 30V /16W V V N:1/16W V H:1/W N:1/W 080 1V H:1/8W N:1/8W V H:1/4W N:1/4W V H:1/3W N:1/4W V H:1/3W V N:1/2W 1V 300V 400V 400V 400V 400V Resistance Range 0.0% 0.1% 0.% 0.% 1% K K K K K 4.7 0K 24.9 K K K K K K K K K K K K 1 332K TR (ppm/ ) 72

3 -TH HIGH STILITY THIN FILM HIP FIXED RESISTOR - TH SERIES High power rating electrical specifications Item 70 ( ) Rated Power at 70 (note) Limiting Element Voltage Max.Overload Voltage Resistance Range 0.0% 0.1% 0.% 0.% 1% TR (ppm/ ) K 20 H:1/2W 200V 400V K 12 H:3/4W 200V 400V 1 = 2 N H 3 -. Note: 1 Rated Voltage= Power Rating Resistance Value or Limiting element voltage whichever is lower. 2 'N' is normal power rating,'h' is high power rating. 3 Operating temp. Range -. haracteristics Test Item T..R Insulation Resistance Voltage Proof Short Time Overload Resistance to Soldering Heat Solder-ability Normal power rating within specified T..R 00M Min No breakdown or flashover R (0.2%R+0.0 ) Specification High power rating R (0.1%R+0.0 ) 9% 9% over Min (IE 601-1) Test Method (IE 601-1) IE /- /+ /+1 /+ IE V V, 1, pply D 0V V between substrate and termination for 1 minute, then check the insulation resistance. IE V/s 60s s. pply max. overload voltage of RMS at a rate of app roximately 0V/s between substrate and terminations for 60s s. IE ( ) R pply 2. times rated voltage or Max overload voltage, (0.%R+0.0 ) whichever is lower, for s. IE s 1s IE s 0.3s 73

4 haracteristics ontinue Test Item Rapid hange of Temperature 70 Endurance at 70 Normal power rating R (0.1%R+0.0 ) R (0.2%R+0.0 ) Specification High power rating R (0.%R+0.0 ) Test Method IE cycles. (IE 601-1) (IE 601-1) IE ( ) 1., Resistor should be exposed at 70 2, and apply rated voltage or limitingelement voltage, whichever is lower, for 1.h on, 0.h off for 00h. Damp Heat, Steady State Operation at Low Temperature R (0.2%R+0.0 ) R (0.1%R+0.0 ) R (0.%R+0.0 ) R (0.%R+0.0 ) IE % 3%RH ( ) Resistor should be exposed at % 3%RH, and apply rated voltage or limiting element voltage, whichever is lower, for 1.h on, 0.h off for 00h. IE , 1h without load rated voltage or limiting element voltage whichever is lower for 4min, min without load. Endurance at Upperategory Temperature Substrate ending Test Sulfuration- Resistant R (0.2%R+0.0 ) R (0.1%R+0.0 ) R (0.%R 0.0 ) IE Resistor should be exposed at 2 for 96 hours. IE (Duration):60s s (ending Distance): mm mm mm 3 00 utting oil :sulphur powder,constant temperature: 3,for 00 h. Packaging Packaging see the appendix Page 83 to 90 Page. 74

5 PKGING ND PREUTION OF HIP RESISTOR Recommend Solder Pad Size hip fixed resistor Thick Film Resistor and Thin Film Resistor Metal Foil Resistor R003~R004 R00~R030 R003~R004 R00~R036 R003~R004 R00~R06 R003~R009 R0~R0 R003~R004 R00~R Thick film chip network resistor Q1 Q2 Q3 Q2 Q3 Q2 Q1 RMY08 / RMT08 / RML08 Q1 Q2 Q3 RMY RMT RML

6 Packaging Paper Taping RMY08 RMT08 For RMY08 RMT08 W F E RMY RMT P P0 D0 T1 T P / RMY / RMT / RML08: For RML08: 84

7 PKGING ND PREUTION OF HIP RESISTOR W F E RML P P0 P1 D0 Thick Film Resistor and Thin Film Resistor T Metal Foil Resistor RML For Embossed Taping 0 0 W F E t P P0 P1 D0 D1 K / /

8 Reel RMY08 RMT08 RML M W T D Packaging Quantity Packaging style Tape&reel ase RMY08 RMT RML RMY08 RMT08 RML Quantity(pcs) IE E-24 E-96 Series Resistance ross-reference List n E-24 E-24 series( ) ( unit k k 0k 1M M 0M 00M )

9 PKGING ND PREUTION OF HIP RESISTOR n E-96 E-96 series ( ) ( unit k k 0k 1M M 0M 00M ) E E-96 series(0603) multiplied ross-reference List and Resistance ross-reference List multiplied code D 4 E F 6 G 7 H -1 X -2 Y -3 Z E-96 E-96 resistance E-96 E-96 resistance E-96 E-96 resistance E-96 E-96 resistance

10 Description for Resistance Value and Marking of Thick Film hip Resistor Resistance Value ll the resistance value code of thick film chip resistor is corresponding with the marking. Marking E-24 (0603 %) E-24 series: Express resistance value on the glass side with three digits, the first tow digits should be significant and the third one denote number of zeros. K 33 E-24 ( %& 0.%) E-24 series (0603 1%& 0.%) : One short bar under marking letter. E-96 E24 1%& 0.% R02 4R03 E-96 series & E-24 series:for the dimension type of R02 4R03 express the resistance value with four digits, the first three digits are significant figures and the fourth de notes the number of zeros. 0K 133 E E-96 For the dimension type of 0603, express the resistance value with three code, the first two digit code denote the resistance of E-96 series, and the third code of letter denote the multiplier (see the table three and four ). 2M R The decimal point should be expressed by R The jumper should be expressed by For the dimension type of there is no mark on the glass side. IE IE E24 For the resistance which don't belong to IE serial, use the resistance of IE serial which is most close to the required resistance of non-ie serial for replacement. To get agreement by both party if there special requirement for the marking. 88

11 PKGING ND PREUTION OF HIP RESISTOR Description for Resistance Value and Marking of Thin Film hip Resistor Resistance Value ll resistance value code of thin film chip resistor,including size used four digits. Example TD03G4701T 4701=4.7K 1R=1. To use four digits code represent resistance value, Example 4701=4.7K 1R=1. Marking E24 E96 E96. When resistance value belongs to E24 as well as E96 series, we suggest preferentially use E96 series. Example K=02, Marking for Size Resistor For size resistor, express the resistance value with four digits code; Example 0K 4.7K 0603 Marking for 0603 Size Resistor 0603-E96 For resistance value belongs to E96 series, express the resistance value with three digits code. Example E24 For resistance value belongs to E24 series, express the resistance value with three digits code. Example 4.7K 270K For the dimension type of there is no mark on the glass side. Example 89

12 hip Resistor Instructions for Use pplication of the products in a special environment can deteriorate product performance 1 Use in various types of liquid, including water, oils, chemicals, and organic solvents. 2 Use outdoors where the products are exposed to direct sunlight, or in dusty places. 3 Use in places where the products are exposed to sea winds or corrosive gases, including l 2, H2S, Nh 3, SO 2, and No 2 etc. 4 Use in places where the products are exposed to static electricity or electromagnetic waves. Use in proximity to heat-producing components, plastic cords, or other flammable items. 6 Use involving sealing or coating the products with resin or other coating materials. 7 Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after soldering : 30 30% 70% Precautions on use of products 1 void applying power exceeding normal rated power, exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 2 e careful when pick up the products with tweezers. There may be a care that the overcoat and / or the body can be chipped. 3 Soldering tip shall not touch the product when install product manually. 4 Storage conditions: T 30, RH 30% 70%. Soldering Recommended reflow profile Recommended wave solder profile Recommended solder alloy 96.Sn/3.0g/0.u 90