Chip Trimmer Potentiometer

Insertion-type Trimmer Potentiometer Bulk

type PotentiometerBulk RH0 Series A mm size that is suitable for a wide range of applications for consumer/industry equipment. Car Use Features Applications Available for a wide range of applications.

3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers

TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in

RS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D

APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART

CHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE

Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60

Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product

RS NS Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product Typical Specifications Items Specifications tolerance ±0% Maximum

RS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D

APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS

100 pf to 47µF RoHS compliant & Halogen free

Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification

1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers. Environmental

TOCOS POTENTIOMETERS 1/4 Square, Single-Turn, Through-Hole Sealed Cermet Trimmers Features 1/4 square, single-turn, through-hole, sealed cermet trimmers Top and side adjust styles available Larger diameter

SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification

SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With

Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications. Total resistance tolerance ±20%

RS K Master (K Fader) Minimum lever wobble and high precision characteristics combined with good operational feel Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V

1.2 Scope: This specification is applied Noise Filter STC-D series supplied

1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1

PMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.

To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,

A wide variety of detector switches available for various Digital AV devices. Typical Specifications

Switch wide variety of detector switches available for various Digital V devices. Typical Specifications Items Rating max. min. Resistive load Contact resistance Initial /fter operating life Operating

Multi Layer Ceramic Capacitors

Introduction SAMHA s series of Multi Layer Ceramic(MLC) chip Capacitor is designed to meet a wide variety of need. Multilayer ceramic chip capacitor are avaliable in both Class and Class formulations.

16mm Size Metal Shaft Type

Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product

Super High AUTO (SHA) Series

PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum

Multi-layer ceramic chip capacitors

Multi-layer ceramic chip capacitors (15 (42) size, chip capacitor)!features 1) Small size (1. x.5 x.5 mm) makes it perfect for lightweight portable devices. 2) Comes packed either in tape to enable automatic

DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification

Ring encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life

E E mm Size encoder with mm height contribute to space saving and multifunctioning Typical Specifications Items Specifications Product Line Structure Dip ctuator l e n g t h(m m) Reflow Detent torque (mn

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V

Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free

DATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf

Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product

DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R

Product Specification DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free Product specification

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification

ST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification

Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free

No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony

WW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201

WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05

Chip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION

FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal

50 TZV 1500 M JDE VB 18X21.5

EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%

APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS

NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1

SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =

0.5 (.020) (.051) 0.2 (.008) min 0.2 (.008) min

With Nickel Barrier Termination NB 12 - NB 20 Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. They are widely used for temperature compensation

PRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..

1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification

/ NTSSeries NTFSeries Temperature cycle : 1000 cycles

/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle

Minimum lever wobble and high precision characteristics combined with good operational feel.

for Fader Control of s Master Type K Fader RS K Series Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications Items tolerance Specifications

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS NP0/X5R/X7R

Product Specification May 5, 2017 V.10 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS 01005 NP0/X5R/X7R 4 V TO 25 V 0.5 pf to 470 nf RoHS compliant & Halogen Free 2 SCOPE This specification describes

CR-PF Series Ultra-Low Lead Content Thick Film Resistor

RoHS COMPLIANT** & HALOGEN FREE*** 102 Features n Ultra-low lead (Pb) content* n Green technology n High reliability and stability n Thick film paste on high grade ceramic substrate n RoHS compliant**

Low Inductance Ceramic Capacitor (LICC)

Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.

WIP201610P Series Engineering Specification

RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS

FMS series Metal Strip Shunt Lead Free Current Sensing Resistors

1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified

No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen

AD Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE

1 1. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE U AD10 R 102 K T Rated Voltage CodeT = 25 VDC U = 50 VDC Size Code : refer to the description in 3 Dielectric

FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free

Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification

INPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions

WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by

3/4W, 2010 Low Resistance Chip Resistor

1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)

CERAMIC CHIP CAPACITORS

Example below indicates : SNPO series, 470 pf, 5%, 50 Volt, Tape/Reel packed, 0805 case size. (EXAMPLE) S N P O 4 7 1 J 0 5 0 T 2 Series Series Code: SNPO, SX7R, SZ5U, SY5V. Note: SNPO indicates COG(NPO)

ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET

TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS. Mid-voltage NP0/X7R. Product Specification April 16, 2015 V.

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 2.2 µf RoHS compliant & Halogen Free Product Specification April 16, 2015 V.15 Product specification

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free

No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)

No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock

CHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions

CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency

Power Resistors for Mounting Onto a Heatsink Thick Film Technology

Power Resistors for Mounting Onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046

User friendly mm type, available in a wide variety. Typical Specifications. Rating (max.) Rating (min.) Initial contact resistance

SKHH 6mm Square ( ) Product Line Top push type Product SKHHAJA00 SKHHALA00 SKHHAQA00 SKHHAKA00 SKHHAMA00 SKHHARA00 SKHHCQA00 SKHHCRA00 SKHHBVA00 SKHHBWA00 SKHHBYA00 SKHHANA00 SKHHAPA00 SKHHBSA00 SKHHDTA00

1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)

1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation

SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.

C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions

Ceramic Trimmer Capacitors

Ceramic Trimmer Capacitors Cat.No.T13E-14 Ceramic Trimmer Capacitors TZ3 Series c Features 1. Color coded case facilitates identifi cation of capacitance range. 2. Sealed construction prevents the penetration

Ceramic Trimmer Capacitors

Ceramic Trimmer Capacitors TZ3 Series c Features 1. Color coded case facilitates identifi cation of capacitance range. 2. Sealed construction prevents the penetration of fl ux and dust. 3. Available in

WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)

WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page

WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)

WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page

TEA10402V15A0 Engineering Specification

TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low

TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x MHz

TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x2.5 24.0000MHz MODEL NO.: TX0283D REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Revised by 1 N/A Initial release 4/19/10 N/A C.C. Hsu 2 TAI-SAW

NTC Thermistor:TTC03 Series

Features 1. RoHS compliant 2. Body size Ф3mm 3. Radial lead resin coated 4. -40 ~ +125 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL /CQC Recommended

WIP201610P L Series Engineering Specification

RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature

DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series

DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead

DATA SHEET ARRAY CHIP RESISTORS YC/TC 164 (8Pin/4R; Pb Free) 5%, 1% sizes

DATA SHEET ARRAY CHIP RESISTORS 164 (Pin/4R; Pb Free) 5%, 1% sizes 4 0603 Supersedes Date of Mar. 06, 2003 2 SCOPE This specification describes YC164 (convex) and TC164 (concave) series chip resistor arrays

WIP252012P L Series Engineering Specification

RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature

Insulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.

ECE ECD mm Size shaft type with a wide variety of applications Typical Specifications Items Specifications Rating Operating life Without detent With detent 0.m V DC m V DC,000 cycles 0,000 cycles (Lightest

Multilayer Ceramic Chip Capacitors

HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced

DATA SHEET General Purpose Thick Film Chip Resistor CR Series

Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan

SMD Side View LEDs LM2C/L7580S76/TR8-T

Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS

THICK FILM CHIP NETWORK RESISTOR THICK FILM CHIP NETWORK RESISTOR FEATURES TYPE DESIGNATION R C M L 0 8 W J T L

THICK FILM CHIP NETORK RESISTOR THICK FILM CHIP NETORK RESISTOR FEATURES Miniature and light weight. Suit for reflow solder. Stable electrical capability, high reliability. Low assembly cost, suit for

COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB

COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB SHEET DATE 1 2 3 4 5 6 7 CONTENTS 2002.11.19 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Initial Released TOTAL PAGE 7 Page 1 of 8 ELECTRICAL AND OPTICAL

CHIP TRIM CERAMIC TRIMMER CAPACITORS AT 0300 RoHS & AT 1300 RoHS

AT 0300 & AT 1300 SURFACE MOUNT TRIMMER CAPACITORS, COMPLIANT Description Very compact package type Ceramic dielectric Special design for reflow soldering use Rated voltage 100 VDC Low temperature coefficient

WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free

WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7

Chip Bead Cores Type: ECCL ECML ECB Features Effective noise suppression for power lines and high speed signal lines Easy pattern layout on PC Board ohs compliant Type: ECCL, ECML Low DC esistance to 8

LKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance

Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material

Provides a superior operational feel with high-speed tracking in motor drive mode.

for Fader Control of s Motor-driven Master TypeMotor N Fader, Motor K Fader RSNM/RS0KV Series Provides a superior operational feel with high-speed tracking in motor drive mode. Features Motor driven, low-profile

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 1206 Package Chip LED (1.0mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow

No Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below

FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.

Multilayer Varistor for ESD pulse

Multilayer Varistor for SD pulse Series ZJZS Series ZJZR n Features l Multilayer monolithic ceramic construction l xcellent solderability and superior heat resistance l Large surge current and energy capabilities

High Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series

Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series

Multilayer Varistor for ESD pulse,burst pulse

Multilayer Varistor for ESD pulse,burst pulse Series EZJZ : For high speed signal line (ZnO:Zinc Oxide) (Small capacitance) Series EZJS : For Power line (ST:Strontium Titanate) (High capacitance) series

MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance

MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of

2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)

2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications

PRODUCT SPECIFICATION

SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER

SMD Side View LEDs EAPL3810A17

Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection. The product itself will remain

SMD Side View LEDs LM2C/L7277SG6/TR8-T

Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS

PTF Series Long Life Slide Potentiometer

*RoHS COMPLIANT Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 00 mm travel lengths Single and dual gang elements Long operational life Tracking error within ± db PTF

NTC Thermistor for Automotive: TTC3-C Series

Features 1. Qualification based on AEC-Q200 Rev-D 2. RoHS compliant 3. Halogen-Free(HF) series are available 4. Body size: Ф3mm 5. Operating temperature range: -55 ~+150 Recommended Applications 1. Car

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High

High Voltage MLC Chips

NEW 630V RANGE HOW TO ORDER 1808 A A 271 High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chip capacitors meet

MF-NSMF Series - PTC Resettable Fuses

*RoHS and EC-Q00 COMPLINT Features n Compliant with EC-Q00 Rev-C Stress Test Qualification for Passive Components in utomotive pplications n Compact design to save board space - 06 footprint n Small size

Full Color SMT Chip LED (3.5 x 3.0 x 1.4 mm)

Full Color SMT Chip LED (3.5 x 3.0 x 1.4 mm) x Red/green/blue + white in single surface mount package x 8 mm tape on 7 reel compatible with automatic placement equipment x Each chip individually addressable

Chip tantalum capacitors (Fail-safe open structure type)

TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions

Current Sensing Resistors FBF Series Metal Paste Type High Power Lead Free Chip Resistors

1. SCOPE 1.1 Purpose Current Sensing Resistors Fixed Thick-Film Metal Paste High-Power Chip Resistors. Rated power up to 2W and apply to Current Sensing in : Consumer Electronics SMPS M/B BTC Portable