User friendly mm type, available in a wide variety. Typical Specifications. Rating (max.) Rating (min.) Initial contact resistance
|
|
- Chastity Beasley
- 5 years ago
- Views:
Transcription
1 SKHH 6mm Square ( ) Product Line Top push type Product SKHHAJA00 SKHHALA00 SKHHAQA00 SKHHAKA00 SKHHAMA00 SKHHARA00 SKHHCQA00 SKHHCRA00 SKHHBVA00 SKHHBWA00 SKHHBYA00 SKHHANA00 SKHHAPA00 SKHHBSA00 SKHHDTA00 SKHHDUA00 SKHHDHA00 SKHHDJA00 Joint stem type Product SKHHCWA00 SKHHDAA00 SKHHDGA00 User friendly mm type, available in a wide variety.n.0n Top push Top push life (ma V DC) 00,000 cycles life (ma V DC) Typical Specifications Rating (max.) Rating (min.) Orange Yellow Initial contact resistance height h=.mm h=mm h=mm h=9.mm h=mm h=mm Minimum order unit(pcs.) Specifications 0mA V DC 0μA V DC 00mΩ max. Travel (mm) 0. height Minimum order unit(pcs.) h=.mm Refer to P.6 for soldering conditions. 9 検出TACT SwitchTMSharp Mount
2 SKHH 6mm Square ( ) SKHH/6mm Square ( ) TACT Switch TM Sharp Product Line With ground terminal type Product SKHHPJA00 SKHHPLA00 SKHHPQA00 life (ma V DC) height h=.mm Minimum order unit (pcs.) SKHHPKA00 SKHHPMA00 SKHHPRA00 SKHHQVA00 Top push h=mm SKHHQWA00 h=mm SKHHQYA00 Mount SKHHPNA00 SKHHPPA00 h=9.mm SKHHQNA00 Side push type Product life (ma V DC) length Minimum order unit (pcs.) SKHHLMA00 SKHHLNA00 l=.8mm SKHHLPA00 SKHHLQA00 SKHHLRA00 l=8.mm SKHHLSA00 SKHHLUA00 Side push SKHHLVA00 l=.8mm SKHHLWA00 SKHHNHA00 SKHHNJA00 00,000 cycles l=.8mm SKHHNKA00 Packing Specifications Bulk Number of packages (pcs.) Product case / case /export packing package measurements (mm) Other 0,000 0,000 SKHHDT, SKHHDU SKHHDH, SKHHDJ SKHHNH, SKHHNJ SKHHNK,000,
3 SKHH/6mm Square ( ) Dimensions Photo Top push type Joint stem type With ground terminal type H6 Style H6 H H6 øa 0. øa.. h.6. h h. 9. h. 9. A... A... Unit:mm PC board mounting hole dimensions (Viewed from switch mounting face) -ø hole -ø hole -ø hole. Ground terminal hole 99 検出TACT SwitchTMSharp Mount
4 SKHH 6mm Square ( ) TACT Switch TM Sharp Dimensions Photo Side push type Style R.8.8 A.. Unit:mm PC board mounting hole dimensions (Viewed from switch mounting face) øa ø. hole. -ø hole Mount R. Note Please use.6mm thick PC boards. Circuit Diagram Top push type / Joint stem type With ground terminal type H Side push type Product Line of Knobs Unit:mm Applicable model Dimensions Color Variety Model Keytop SKHH Applicable to joint stem type.8. Blue Ivory Yellow SKAA000 SKAA000 SKAA000 SKAA000 SKAA000 Note The knob will be delivered together with the switch but packed separately. 00
5 TACT Switch TM List of Varieties TACT Switch TM Sharp Sharp Snap in Series SKHL SKHH SKHW SKQJ SKQB SKQE SKHC Photo Features Long-life Water-proof Dust-proof IP standard Top push Side push Dimensions (mm) W 6 D. H./ See the relevant pages for respective product descriptions./ //. See the relevant pages for respective product descriptions Mount Operation coverage N max. N to N N to N N to N N to N Travel (mm) Ground terminal temperature range 0 to to +0 0 to to +8 Automotive use Life Cycle Electrical performance Rating (max.) (Resistive load) Rating (min.) (Resistive load) Insulation resistance 0mA V DC 0μA V DC 00MΩ min. 00V DC min. Durability Voltage proof Vibration Lifetime 0V AC min. 0 to to 0Hz/min., the amplitude is.mm for all the frequencies, in the of X, Y and Z for hours respectively Shall be in accordance with individual specifications. Cold 0 96h 0 96h 0 96h Environmental performance Dry heat 90 96h 80 96h 90 96h Damp heat 60, 90 to 9%RH 96h 60, 90 to 9%RH h 60, 90 to 9%RH 96h Page W:Width. The most outer dimension excluding terminal portion. D :Depth. The most outer dimension excluding terminal portion. H :Height. The minimum dimension if there are variances. TACT Switch TM Soldering s 6 TACT Switch TM Cautions 66 Notes. The automotive operating temperature range to be individually discussed upon request.. Indicates applicability to all products in the series. 88
6 TACT Switch TM Soldering s for Reflow Available for Mount.. Temperature measurement: Thermocouple φ 0. to 0. CA (K)or CC (T)at solder joints (copper foil surface). A heat resistive tape should be used to fix thermocouple.. Temperature profile Temperature ( C ) sec max. pre-heating to min. Time inside soldering equipment 60 C max. sec max. 0 C 0s max. Notes. The above temperature shall be measured of the top of switch. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures.. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. s for Auto-dip Available for and. Flux built-up Preheating temperature Preheating time Duration of immersion Number of soldering SKHH, SKPD Series Flux built-up Preheating temperature Preheating time Duration of immersion Number of soldering SKQJ, SKQK, SKEG Series Flux built-up Preheating temperature Preheating time Duration of immersion Number of soldering Mounting surface should not be exposed to flux Ambient temperature of the soldered surface of PC board. 00 max. 60s max. 60 max. s max. times max. Mounting surface should not be exposed to flux Ambient temperature of the soldered surface of PC board. 0 max. 60s max. 60 max. s max. times max. Mounting surface should not be exposed to flux Ambient temperature of the soldered surface of PC board. 00 max. s max. max. s max. times max. Manual Soldering Duration of soldering Capacity of soldering iron Notes. Prevent flux penetration from the top side of the TACT Switch TM.. Switch terminals and a PC board should not be coated with flux prior to soldering.. The second soldering should be done after the switch is stable with normal temperature.. Use the flux with a specific gravity of min 0.8. (EC-9S-8 by TAMURA Corporation, or equivalents.) Time SKHH, SKHW, SKRG, SKPD Series Duration of soldering Capacity of soldering iron SKTD, SKTG, SKQJ, SKQK, SKEG Series Duration of soldering Capacity of soldering iron 0 max. s max. 60W max. 60 max. s max. 60W max. 0 max. s max. 0W max. 6 検出TACT SwitchTMSharp Sharp Mount
A wide variety of detector switches available for various Digital AV devices. Typical Specifications
Switch wide variety of detector switches available for various Digital V devices. Typical Specifications Items Rating max. min. Resistive load Contact resistance Initial /fter operating life Operating
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationInsulated shaft type with a wide variety of applications. Typical Specifications. Rating. Operating life. Operating temperature range.
ECE ECD mm Size shaft type with a wide variety of applications Typical Specifications Items Specifications Rating Operating life Without detent With detent 0.m V DC m V DC,000 cycles 0,000 cycles (Lightest
More informationMinimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications. Total resistance tolerance ±20%
RS K Master (K Fader) Minimum lever wobble and high precision characteristics combined with good operational feel Typical Specifications Items Specifications tolerance ±0% Maximum operating voltage 50V
More information16mm Size Metal Shaft Type
Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational
More information1.4(H)mm, 1.5/2mm-travel Surface Mount Type. A low-profile slide switch with 1.4mm thickness. Typical Specifications
SSSS8.(H)mm, /mm-travel Surfae Mount Type low-profile slide swith with.mm thikness Produt Line (mm) tuator diretion Vertial tuator thikness (mm) t Poles Positions Typial Speifiations Changeover timing
More informationRing encoder with 4mm height contribute to space saving and multifunctioning. Typical Specifications. Rating. Operating life
E E mm Size encoder with mm height contribute to space saving and multifunctioning Typical Specifications Items Specifications Product Line Structure Dip ctuator l e n g t h(m m) Reflow Detent torque (mn
More informationLow-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product
RS NS Low-profile Master Type (Slim Type) The thinnest possible body contributes to reduced size, height and weight of the set product Typical Specifications Items Specifications tolerance ±0% Maximum
More information9mm Size Metal Shaft Multi-ganged Type. Typical Specifications. Total resistance tolerance ±20% Maximum operating voltage
K09 9mm Size Multi-ganged 9.mm width potentiometer ideal for various s of control Typical Specifications Items Specifications tolerance ±% Maximum operating voltage 0V C, V DC Total rotational angle 3
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationSpecifications: The shelf life of product is within 6 months. Features Description Test Conditions Requirements
Specifications: Operating Temperature Range : -25 C to+70 C Storage Temperature Range : -30 C to +80 C Current Range : 50mA, 12V DC The shelf life of product is within 6 months Test Sequence: Appearance
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationPECIFICATIONS Model TC03 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric.
PECIFICATIONS Model TC3 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric. 2. Main characteristics Table 1 Part No. TC3Z5H169B TC3Z1H169B TC3R1H169B
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More information3.5(H)mm, 2mm-travel Type
Swith (H)mm, mm-travel Type SSSS Series Exellent appliation for designing ompat and high density portable devies. Detetor Typial Speifiations Items Rating/min. Resistive load Contat resistane Initial performane/fter
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationElectric Double Layer Capacitors Product Specification. To. : DATE : SPECIFICATION WRITTEN CHECKED APPROVED
To. : DATE : 200... SPECIFICATION PRODUCT MODEL : STARCAP : DCS series WRITTEN CHECKED APPROVED 1 Index Page No. ITEM etc. 1 Cover Page 2 Index 1. Scope 2. Part Number System 3 3. Product Model Name 4.
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More informationMinimum lever wobble and high precision characteristics combined with good operational feel.
for Fader Control of s Master Type K Fader RS K Series Minimum lever wobble and high precision characteristics combined with good operational feel. Typical Specifications Items tolerance Specifications
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More informationCER Series Controlled ESR Capacitors
CER Series Controlled ESR Capacitors Type: CERB (C1608) CERD (C2012) Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before using this product SAFETY REMINDERS REMINDERS 1. If you intend
More informationSC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More informationApplications: MCY 4C 3 B 103 K 500 C T. Two significant digits followed by no. of zeros. And R is in place of decimal point.
Description: WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire
More informationChip Trimmer Potentiometer
Chip Potentiometer RH0/RH0 Series A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount
More informationChip tantalum capacitors
Chip tantalum capacitors TCO series Case TCO Series Case Features () ) Conductive polymer used for the cathode material. 2) Ultra-low ESR. (/ compared with the conventional type) 3) Screening by thermal
More informationCompact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size ompact and highly reliable type available in many varieties. Typical Specifications Output signal Items Specifications Two phase of, B Three phase of, B and (1H) Self-return switch (11 / 10B)
More informationApplications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationCeramic PTC Thermistor: PPL Series
Features. RoHS compliant 2. Leaded type 3. Voltage rating: 270V ac ~500V ac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=V max ) -40 ~ +25 C (V=0)
More informationConfigurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
More informationPRODUCT SPECIFICATION FOR Micro SIM +Nano SIM/Micro SD (T/F)Card Connector SERIES
Page 1 of 5 1.0 SCOPE This Specification covers Micro SIM +Nano SIM/Micro SD Card Connector SERIES 2.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings and other sections of this specification
More informationPRODUCT SPECIFICATION
SCOPE 1.25mm 9(& 2$ 2 This specification covers the 1.25 mm PITCH WIRE TO BOARD CONNECTOR (DUAL TYPE) series PRODUCT NAME AND PART NUMBER
More informationInsertion-type Trimmer Potentiometer Bulk
type PotentiometerBulk RH0 Series A mm size that is suitable for a wide range of applications for consumer/industry equipment. Car Use Features Applications Available for a wide range of applications.
More informationCeramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
More informationCompact and highly reliable type available in many varieties. Typical Specifications. Output signal. Rating. Operating life
1 11mm Size Compact and highly reliable type available in many varieties Typical Specifications Items Specifications ncoders Product Line Structure Horizontal configuration Length of the shaft (mm) Torque
More informationWLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationProduct Data Sheet PD-0053-A
Product Data Sheet PD-0053-A 3M Mini D Ribbon (MDR) Connector MDR Surface Mount 102XX-1210 XE 102XX-1S10 XE Page: 1 of 11 Table of Contents 1.0 SCOPE...2 2.0 PRODUCT TESTED...2 3.0 GENERAL CONDITIONS...2
More informationMicrowave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More information8.5(H)mm, 2mm-travel Type
Swith 8.5(H)mm, mm-travel Type Large-size general purpose type well established in various fields. Typial Speifiations Items ating min. esistive load Contat resistane Initial performane/fter lifetime Operating
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationSMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
More informationRS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
More informationPRODUCT. Part. A1 Micro USB USB3140. Rev. Page. Description Doc USB3140.
1 PREL LIM MI IN AR RY 1.0 SCOPE. This specification covers performance, tests and quality requirements for the Receptacle (Type B, SMT, Vertical)..0 NAME AND PART NUMBER. Receptacle, 5 Pins, SMT, Type
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL THICK FILM CHIP RESISTOR STANDARD TYPE CHIP RESISTOR ARRAY TYPE CHIP RESISTOR CONTENTS 1. STANDARD TYPE CHIP RESISTOR 1 2. ARRAY TYPE CHIP RESISTOR 4 3. THICK FILM CHIP RESISTOR
More informationHigh Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
More informationLow-profile type with excellent operability contributes to add flexibility in set design.
for Fader Control of s Low-profile Master TypeN Fader RSN Series Low-profile type with excellent operability contributes to add flexibility in set design. Features Excellent operational feel from less
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationProvides a superior operational feel with high-speed tracking in motor drive mode.
for Fader Control of s Motor-driven Master TypeMotor N Fader, Motor K Fader RSNM/RS0KV Series Provides a superior operational feel with high-speed tracking in motor drive mode. Features Motor driven, low-profile
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RZC K HTS 0001 /6 Date: 2017. 4. 21 Data sheet Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE ANDULTRAHIGH VOLTAGE Style: RZC50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More information1. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising. 3. Status indicators : Comsumer & industrial
Features: 1. Emitted Color : Yellow Green Package Dimensions: 2. Lens Appearance : Water Clear. 3. Mono-color type. 4. 3.2x1.6x1.1mm(126) standard package. 5. Suitable for all SMT assembly methods. 6.
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationMultilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.
More informationMULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
More informationNTC Thermistor:TTF Type
Features 1. RoHS compliant 2. Radial leaded insulation film coated 3. -40 ~ +100 operating temperature range 4. Agency recognition: UL /cul Recommended Applications 1. Home appliances (air conditioner,
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationMultilayer SMD Ceramic Capacitors General Purpose Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. MLCC is made
More informationMultilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationProsperity Dielectrics Co., Ltd. PDC. No.148, Chang-An Rd., Sec.1, Lu-Tsu Shiang, Taoyuan, Taiwan FPFL-Rev.7.
High-Power Low Lead Free Chip Resistors 1. SCOPE..2 Purpose..2 Configuration.... 2 Part Number.....2 2. PERFORMANCE CHARACTERISTICS....3 2.1 Power Derating Curve by Ambient Temperature....3 2.2 Mechanical
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationReference Specification
Reference Specification High Voltage Ceramic Capacitor DHRB5AD221M1CB Issued Date: November 14, 2012 Product specifications in this drawing are subject to change or our products described in this drawing
More informationCOMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB
COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB SHEET DATE 1 2 3 4 5 6 7 CONTENTS 2002.11.19 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Initial Released TOTAL PAGE 7 Page 1 of 8 ELECTRICAL AND OPTICAL
More informationDATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationCHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions
CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1. AEC-Q200 qualified (Without RMC1/32)
No.: RMC-K-HTS-0006 /11 Date: 2017. 4. 18 Data sheet Title: Style: RMC1/32,1/20,1/16S,1/16,1/10,1/8,1/4,1/2,1 AEC-Q200 qualified (Without RMC1/32) RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationWK25V, WK20V, WK12V, WK08V, WK06V. Thick Film High Voltage Chip Resistors. Size 2512, 2010,1206, 0805, 0603
WK25V, WK20V, WK12V, WK08V, WK06V ±5%, ±2%, ±1%, ±0.5% Thick Film High Voltage Chip Resistors Size 2512, 2010,1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice. Page 1
More informationDATA SHEET General Purpose Thick Film Chip Resistor CR Series
Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More information3mm Photodiode PD204-6B
3mm Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More informationChip tantalum capacitors (Fail-safe open structure type)
TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
More information