Cat. No. 140M-F M-D8E-B

Transcription

1 Bulletin 0M Motor Protection Circuit Breakers Product Selection Motor Protection Circuit Breakers Short Circuit Protection Standard Magnetic Trip ( x I e ) Motor Overload Protection Trip Class Rated Operational Current (I e ) [A] Cat. No. 0M-C Motor Current Adjustment Range [A] Magnetic Trip Current [A] Cat. No. 0M-D Cat. No. 0-CMN Max. Short Circuit Current [ka] Max. -phase Hp Ratings Max. kw, -Phase AC- 00V (I cu ) 0V (group motor) 00V 0V 0V V 0V 00/V 00V 0V C-Frame Cat. No M-CE-A M-CE-A M-CE-A M-CE-A M-CE-B M-CE-B M-CE-B M-CE-B M-CE-B M-CE-C M-CE-C M-CE-C M-CE-C M-CE-C M-CE-C D-Frame M-DE-B M-DE-B M-DE-B M-DE-C M-DE-C M-DE-C M-DE-C M-DE-C M-DE-C F-Frame M-FE-C M-FE-C M-FE-C M-FE-C M-FE-C M-FE-C CMN-Frame Cat. No. 0M-F CMN CMN CMN CMN-000 Horsepower/kW ratings shown in the table above are for reference. The final selection of the MPCB depends on the actual motor full load current. - Publication A-CA00A-EN-P

2 Bulletin 0M Motor Protection Circuit Breakers Product Selection Motor Protection Circuit Breakers Short Circuit Protection Standard Magnetic Trip (Fixed at... x I e ) Overload Protection Trip Class...0 (Adjustable) Rated Operational Current (I e ) [A] Cat. No. 0M-I Cat. No. 0M-J Cat. No. 0M-L Motor Current Adjustment Range [A] Magnetic Trip Current [A] Ultimate Interrupting Current [ka] (I cm ) -phase Hp Ratings Max. kw, -Phase AC- 00V 0V 00V 0V 0V V 0V 00/V 00V 0V I-Frame Cat. No M-IE-C M-IE-D M-IE-D M-IE-D0 J-Frame M-JE-C M-JE-D M-JE-D M-JE-D M-JE-C M-JE-D M-JE-D M-JE-D L-Frame M-LE-D M-LE-D M-LE-D M-LE-D M-LE-D M-LE-D Horsepower/kW ratings shown in the table above are for reference. The final selection of the MPCB depends on the actual motor full load current. For IEC approvals and CE marking, add an "E" to the end of the Cat. No. Example: 0M-E-C0E. Overload Protection adjustable Trip Class,,, or 0. Overload Protection fixed Trip Class. Publication A-CA00A-EN-P -

3 Bulletin 0M Motor Protection Circuit Breakers Product Selection High Inrush Motor Protection Circuit Breakers Short Circuit Protection High Magnetic Trip (Fixed at x I e ) Motor Overload Protection Trip Class Rated Operational Current (I e ) [A] Motor Current Adjustment Range [A] Cat. No. 0M-C Magnetic Trip Current [A] Max. Short Circuit Current [ka] Max. -phase Hp Ratings Max kw, -Phase AC- 00V (I cu ) Cat. No. 0M-D 0V (group motor) 00V 0V 0V V 0V 00/V 00V 0V C-Frame Cat. No M-CT-A M-CT-A M-CT-A M-CT-A M-CT-B M-CT-B M-CT-B M-CT-B M-CT-B M-CT-C M-CT-C D-Frame M-DT-C M-DT-C0 F-Frame Cat. No. 0M-F. 0. 0M-FT-C M-FT-C Horsepower/kW ratings shown in the table above are for reference. The final selection of the MPCB depends on the actual motor full load current. - Publication A-CA00A-EN-P

4 Bulletin 0M Motor Protection Circuit Breakers Product Selection Motor Protection Circuit Breakers Screwless Short Circuit Protection Standard Magnetic Trip ( x I e ) Motor Overload Protection Trip Class Rated Operational Current (I e ) [A] Motor Current Adjustment Range [A] Magnetic Trip Current [A] Max. Short Circuit Current [ka] Max. -phase Hp Ratings Max. kw, -Phase AC- 00V (I cu ) 0V (group motor) 00V 0V 0V V 0V 00/V 00V 0V C-Frame Cat. No M-RCE-A M-RCE-A M-RCE-A M-RCE-A M-RCE-B M-RCE-B M-RCE-B M-RCE-B M-RCE-B M-RCE-C M-RCE-C Horsepower/kW ratings shown in the table above are for reference. The final selection of the MPCB depends on the actual motor full load current. Publication A-CA00A-EN-P -

5 Bulletin 0M Motor Circuit Protectors Product Overview Bulletin 0M Motor Circuit Protectors Current range A UL Listed/Recognized for motor loads Short-circuit protection Overload protection must be provided separately Visible trip indication High current limiting High switching capacity The Bulletin 0M Motor Circuit Protectors provide short circuit protection for individual motor loads. Factory-installed internal accessories make installation and wiring easy. Certifications (0. A) CE Marked culus Listed (File No. E, Guide No. NLRV, NLRV) CCC Certifications ( 00 A) UR Recognized component (File No. E, Guide DKPU) CSA Certified (Cleass No. -0) Table of Contents Product Selection Motor Circuit Protectors... - Approximate Dimensions... - Standards Compliance IEC/EN 0-,, --, -- IEC/EN 00- CSA, C. No. UL 0 UL (H-, J-, L-, N-Frame) General Information Motor Circuit Protectors may provide the following protective and control functions. Disconnect for Motor Branch Circuit Branch-Circuit, Short-Circuit Protection (Magnetic Protection) Switching (Manual) In North America, electrical codes require that an individual Motor Branch Circuit be protected by a UL/CSA Listed Fuse, Circuit Breaker or Self-Protected Combination Motor Controller. 0M-C, D and F Frames: The 0M-C, D and F frame Motor Circuit Protectors have one UL/CSA Listing as Manual Motor Controllers (with optional approvals for Motor Disconnect and Group Installation). In NEC/CEC Group Installations, these devices must be applied per the appropriate rules which require the use of an upstream Branch-Circuit, Short-Circuit Protective Device (BCPD). See the table on page -0 for the specific ratings of each Motor Circuit Protector. The 0M-C, D and F Frame Motor Circuit Protectors are also UL/CSA Listed, together with a Bulletin 0C contactor and Bulletin overload relay, as part of our Bulletin T and T Self-Protected IEC Combination Starters. These starters are then able to provide all of the necessary NEC/CEC requirements for the protection and control of individual Motor Branch Circuits without additional protective devices. 0M-H, J and L Frames: The 0M-H, J and L frame Motor Circuit Protectors are UL/CSA Recognized as Circuit Breakers as shown in the table on page -0. They are UL/CSA Recognized, rather than UL/CSA Listed, since they only provide short circuit protection and not thermal overload protection for the motor. 0M-H, J and L frame Motor Circuit Protectors (MCPs) are also UL/CSA Listed, together with a Bulletin 0C contactor and Bulletin overload relay, as part of our Bulletin IEC Combination Starters. These starters are then able to provide all of the necessary NEC/CEC requirements for the protection and control of individual Motor Branch Circuits without additional protective devices. - Publication A-CA00A-EN-P

6 Bulletin 0M Motor Circuit Protectors Product Overview/Catalog Number Explanation Product Line Overview C-Frame D-Frame F-Frame H-Frame J-Frame L-Frame N-Frame Max. Current I e A A A 0 A 0 A 00 A 00 A Current Rating 0.. A. A A Short Circuit Protection Standards Compliance: CSA., No. CSA., No. UL 0 (Group Install.) UL (Recognized) IEC 0- CE CCC (up to A) Accessories Ext. Rotary Operator Flex Cable Operator Auxiliary Contacts Trip Indication Contacts Cat. No. Explanation Examples given in this section are for reference purposes. This basic explanation should not be used for product selection; not all combinations will produce a valid catalog number. Code 0M Code C D F H J L N a Bulletin Number Motor Circuit Protectors (MCPs) b Frame Size and Rating A A A A 0 A 00 A and 00 A 00 A and 00 A Interrupting Rating / Breaking Capacity (I c at 0V) Code Normal Break High Break c 0M C N A KN CC GJ a b c d e f g h Code e Current Range Code Example A A =. A = 0. B B =.0 B =. C C = C = D D = 0 D = 0 E E = 00 E = 00 d Protection Type N Fixed Mag Only ( x I n ) P R Adj Mag Only (less than x I n ) - MCPs Adj Mag Only (greater than x I n ) - MCP's f, g, h Factory-Installed Options f Miscellaneous See page - g Aux/Trip Contacts See page - h UV and Shunt Trips See page - Publication A-CA00A-EN-P -

7 Bulletin 0M Motor Circuit Protectors Wiring Diagram Group Installation with MCPs There is only one Branch Circuit Protective Device (BCPD) for the Group Group installation has been successfully used for many years in the U.S. and Canada. It allows two or motors or one or more motors and other loads to be connected to the same branch-circuit. The most restrictive part of the conditions specified for Group Installation is the requirement for the protection of the conductors for each motor circuit. Below is an example that illustrates installations involving multiple motors with a single BCPD protecting the entire Group. Bulletin 0M Motor Circuit Protectors UL/CSA Listed for Group Installation Conductors from the BCPD to each motor must be a minimum of / the ampacity of the Branch Circuit conductors. Motor Circuit Protectors do not provide thermal protection, so a separate overload relay must be used. Therefore, MCPs cannot be UL/CSA Listed for Tap Conductor Protection in Group Installations. Bulletin 0M-C F Group Installation: Single Motor Taps Must be / the ampacity of the Branch-Circuit conductors Branch Circuit conductors BCPD Branch Circuit Protective Device Fuses or Circuit Breaker Group Motor Installation - Publication A-CA00A-EN-P

8 Bulletin 0M Motor Circuit Protectors Wiring Diagram -Phase Power Supply Multi-Motor Installation Publication A-CA00A-EN-P -

9 Bulletin 0M Motor Circuit Protectors Product Selection Motor Circuit Protectors Short circuit protection standard magnetic trip ( x I e ) Short circuit protection for component starters No motor overload protection separate Bulletin -E or -T product required for overload and installation protection For Trip Class motor applications Cat. No. 0M-C Cat. No. 0M-D Cat. No. 0M-F Rated Operational Current (I e ) [A] Magnetic Trip Current [A] Ultimate Interrupting Current [ka] Max. -phase Hp Ratings Max. kw, -Phase AC- 00V (I cu ) 0V (group motor) 00V 0V 0V V 0V 00/V 00V 0V C-Frame Cat. No M-CN-A M-CN-A M-CN-A M-CN-A M-CN-B M-CN-B M-CN-B D-Frame M-DN-B M-DN-B M-DN-B M-DN-C M-DN-C M-DN-C M-DN-C F-Frame M-FN-C M-FN-C M-FN-C Horsepower/kW ratings shown in the table above are for reference. The final selection of the manual starter depends on the actual motor full load current. Note: In applications with 0M-C_N, 0M-D_N and 0M-F_N as the short circuit protection device of heavy duty starting motors, the rated operational current I e of the above devices must be over-dimensioned with following factors: CLASS =.00 CLASS =. CLASS 0 =. CLASS =. CLASS 0 =. - Publication A-CA00A-EN-P

10 Bulletin 0M Motor Circuit Protectors Product Selection Motor Circuit Protectors Short-Circuit Protection Magnetic Trip (Adjustable at... x I e ) Overload Protection None (Magnetic Trip Only) Rated Operational Current (I e ) [A] Cat. No. 0M-H Cat. No. 0M-J Cat. No. 0M-L Magnetic Trip Current [A] Cam Setting -phase Hp Ratings Max. kw, -Phase AC- A B C D E F G H I 00V 0V 0V V 0V 00/V 00V 0V H-Frame Cat. No M-HP-B M-HP-B M-HP-C M-HP-C M-HP-C M-HP-C M-HP-D M-HR-D J-Frame M-JP-D M-JP-D M-JP-D M-JP-D M-JP-D M-JP-D M-JP-D L-Frame M-LP-D M-LP-D M-LP-D M-LP-D M-LP-D M-LP-D M-LP-D M-LP-D0 N-Frame M-NP-D M-NP-E The Hp and kw ratings shown are for reference only. They allow for a magnetic trip setting of at least up to X the motor FLA. However, the final selection of the MCP should be made based on motor full load current and the requirements of local electrical codes. The interrupting rating for MCPs is dependent upon the controller used. Please contact your local Rockwell Automation sales office or Allen-Bradley distributor for further information. Publication A-CA00A-EN-P -

11 Bulletin 0M Application Ratings UL/CSA Listed Application Ratings Motor Protection Circuit Breaker (MPCB) Only - Cat. No. Max. Fuse or C.B. per NEC Group Motor Installation Max. Short Circuit Current [ka] UL 0 Manual Motor Controller Motor Disconnect Max. Short Circuit Current [ka] Tap Conductor Protection Max. Short Circuit Current [ka] Publication A-CA00A-EN-P UL 0 Self-Protected (Type E) Combination Motor Controller Max. Short Circuit Current [ka] UL Inverse Time C.B. w/ul 0 Motor Overload Protection Max. Short Circuit Current [ka] 0V 00V 0V 00V 0V 00V 0Y/V 00Y/V 0V 00V C-Frame 0M-CE-A 0 0M-CE-A 0 0M-CE-A0 0 0M-CE-A 0 0M-CE-B 0 0M-CE-B 0 0M-CE-B M-CE-B0 0 0M-CE-B M-CE-C M-CE-C M-CE-C M-CE-C 0 0M-CE-C 0 0M-CE-C 0 D-Frame 0M-DE-B M-DE-B M-DE-B M-DE-C M-DE-C M-DE-C M-DE-C M-DE-C M-DE-C F-Frame 0M-FE-C M-FE-C M-FE-C M-FE-C M-FE-C M-FE-C 00 CMN-Frame 0-CMN CMN CMN CMN I-Frame 0M-IE-C0 0 0M-IE-D 0 0M-IE-D 0 0M-IE-D0 0 J-Frame 0M-JE-C0 0M-JE-D 0M-JE-D 0M-JE-D 0M-JE-C0 0M-JE-D 0M-JE-D 0M-JE-D L-Frame 0M-LE-D 0M-LE-D0 0M-LE-D 0M-LE-D 0M-LE-D0 0M-LE-D For full voltage (delta) ratings above V or V, follow the NEC or CEC rules for group motor applications.

12 Bulletin 0M Application Ratings UL/CSA Listed Application Ratings Motor Protection Circuit Breaker (MPCB) Only, Continued Cat. No. Max. Fuse or C.B. per NEC UL 0 Manual Motor Controller Group Motor Installation Motor Disconnect Tap Conductor Protection Max. Short Circuit Current [ka] Max. Short Circuit Current [ka] Max. Short Circuit Current [ka] UL 0 Self-Protected (Type E) Combination Motor Controller Max. Short Circuit Current [ka] 0V 00V 0V 00V 0V 00V 0Y/V 00Y/V C-Frame 0M-CT-A 0 0M-CT-A 0 0M-CT-A0 0 0M-CT-A 0 0M-CT-B 0 0M-CT-B M-CT-B 0 0M-CT-B M-CT-B M-CT-C M-CT-C D-Frame 0M-DT-C M-DT-C F-Frame 0M-FT-C M-FT-C 00 For full voltage (delta) ratings above V or V, follow the NEC or CEC rules for group motor applications. Publication A-CA00A-EN-P -

13 Bulletin 0M Application Ratings UL Listed Application Ratings Motor Circuit Protectors Only Cat. No. Max. Fuse or C.B. per NEC UL 0 Manual Motor Controller UL Instantaneous Trip Circuit Breaker (Magnetic Only) Group Motor Installation Motor Disconnect Motor Circuit Protector Max. Short Circuit Current [ka] Max. Short Circuit Current [ka] Max. Short Circuit Current [ka] 0V 00V 0V 00V 0V 00V C-Frame 0M-CN-A 0 0M-CN-A 0 0M-CN-A0 0 0M-CN-A 0 0M-CN-B 0 0M-CN-B 0 0M-CN-B D-Frame 0M-DN-B M-DN-B M-DN-B M-DN-C M-DN-C M-DN-C M-DN-C F-Frame 0M-FN-C M-FN-C M-FN-C 00 H-Frame 0M-HP-B0 0 0M-HP-B0 0 0M-HP-C 0 0M-HP-C0 0 0M-HP-C0 0 0M-HP-C0 0 0M-HP-D 0 0M-HR-D 0 J-Frame 0M-JP-C0 0 0M-JP-C0 0 0M-JP-D 0 0M-JP-D 0 0M-JP-D 0 0M-JP-D 0 0M-JP-D0 0 0M-JP-D 0 0M-JP-D 0 L-Frame 0M-LP-D 0 0M-LP-D 0 0M-LP-D0 0 0M-LP-D 0 0M-LP-D0 0 0M-LP-D 0 0M-LP-D0 0 0M-LP-D0 0 N-Frame 0M-NP-D0 0M-NP-E Separate overload protection is required. The interrupting rating for MCPs is dependent upon the controller used. Contact your local Rockwell Automation sales office or Allen-Bradley distributor for further information. -0 Publication A-CA00A-EN-P

14 Bulletin 0M Application Ratings UL Listed Application Ratings - Motor Protection Circuit Breakers with Bulletin 0-K Contactors Cat. No. Max. Fuse or C.B. per NEC UL 0 Manual Motor Controller Minimum Contactor Size Group Motor Installation Max. Short Circuit Current [ka] Motor Disconnect Max. Short Circuit Current [ka] UL 0 Type F Combination Motor Controller UL 0 Type E Self-Protected Combination Motor Controller Minimum Max. Short Circuit Current Minimum Max. Short Circuit Current Contactor [ka] Contactor [ka] 0V 00V 0V 00V Size 0Y/V 00Y/V Size 0Y/V 00Y/V C-Frame 0M-CE-A 0 0-K0 0-K0 0M-CE-A 0 0-K0 0-K0 0M-CE-A0 0 0-K0 0-K0 0M-CE-A 0 0-K0 0-K0 0M-CE-B 0 0-K0 0-K0 0M-CE-B 0 0-K0 0-K0 0M-CE-B 0 0-K K0 0 0M-CE-B0 0 0-K K0 0 0M-CE-B 0 0-K K0 0M-CE-C 0 0-K K0 0M-CE-C 0 0-K K 0 D-Frame 0M-DE-B 0 0-K K0 0 0M-DE-B0 0 0-K K0 0 0M-DE-B 0 0-K K0 0 0M-DE-C 0 0-K K0 0 0M-DE-C 0 0-K K 0 For full voltage (delta) ratings above V or V, follow the NEC or CEC rules for group motor applications. Publication A-CA00A-EN-P -

15 Bulletin 0M Application Ratings UL Listed Application Ratings - Motor Protection Circuit Breakers with Bulletin 0-C Contactors Cat. No. Max. Fuse or C.B. per NEC UL 0 Manual Motor Controller Minimum Contactor Size Group Motor Installation Max. Short Circuit Current [ka] Motor Disconnect Max. Short Circuit Current [ka] UL 0 Type F Combination Motor Controller UL 0 Type E Self-Protected Combination Motor Controller Minimum Max. Short Circuit Current Minimum Max. Short Circuit Current Contactor [ka] Contactor [ka] 0V 00V 0V 00V Size 0Y/V 00Y/V Size 0Y/V 00Y/V C-Frame 0M-CE-A 0 0-C0 0-C0 0-C0 0M-CE-A 0 0-C0 0-C0 0-C0 0M-CE-A0 0 0-C0 0-C0 0-C0 0M-CE-A 0 0-C0 0-C0 0-C0 0M-CE-B 0 0-C0 0-C0 0-C0 0M-CE-B 0 0-C0 0-C0 0-C0 0M-CE-B 0 0-C C0 0 0-C0 0 0M-CE-B0 0 0-C C0 0 0M-CE-B 0 0-C C0 0M-CE-C 0 0-C C0 0M-CE-C 0 0-C C 0 0 0M-CE-C0 0 0-C C 0M-CE-C 0 0-C C M-CE-C 0 0-C0 0M-CE-C 0 0-C 0M-DE-B D-Frame 0 0-C C0 0 0-C0 0 0-C 0 0M-DE-B0 0 0-C C0 0 0-C 0 0M-DE-B 0 0-C C0 0 0-C0 0 0M-DE-C 0 0-C C0 0 0-C0 0 0M-DE-C 0 0-C C 0 0-C0 0 0M-DE-C0 0 0-C C 0-C0 0M-DE-C 0 0-C C 0 0-C0 0 0M-DE-C 0 0-C0 0M-DE-C 0 0-C F-Frame 0M-FE-C 00 0-C C0 0 0-C0 0 0M-FE-C 00 0-C C0 0 0-C0 0 0M-FE-C C C0 0 0-C0 0 0M-FE-C 00 0-C C0 0 0-C0 0 0M-FE-C 00 0-C C0 0 0-C0 0 0M-FE-C 00 0-C 0-C 0-C CMN-Frame 0-CMN C 0-CMN C0 0-CMN C 0-CMN C For full voltage (delta) ratings above V or V, follow the NEC or CEC rules for group motor applications. - Publication A-CA00A-EN-P

16 Bulletin 0M Application Ratings UL Listed Application Ratings - Motor Circuit Protectors with Bulletin 0-C Contactors Cat. No. Max. Fuse or C.B. per NEC Minimum Contactor Size UL 0 Manual Motor Controller Group Motor Installation Motor Disconnect UL 0 Type E (Self-Protected) Combination Motor Controller Max. Short Max. Short Max. Short Circuit Current Max. Short Circuit Current Circuit Circuit Minimum [ka] [ka] Current [ka] Current [ka] Contactor 0V 00V 0V 00V Size 0Y/V 00Y/V C-Frame 0M-CN-A 0 0-C0 0-C0 0M-CN-A 0 0-C0 0-C0 0M-CN-A0 0 0-C0 0-C0 0M-CN-A 0 0-C0 0-C0 0M-CN-B 0 0-C0 0-C0 0M-CN-B 0 0-C0 0-C0 0M-CN-B 0 0-C C0 0M-DN-B D-Frame 0 0-C C0 0-C 0 0M-DN-B0 0 0-C C 0 0M-DN-B 0 0-C C0 0 0M-DN-C 0 0-C C0 0 0M-DN-C 0 0-C C0 0 0M-DN-C 0 0-C C0 0M-DN-C 0 0-C F-Frame 0M-FN-C 00 0-C C0 0 0M-FN-C 00 0-C C0 0 0M-FN-C 00 0-C 0-C Separate overload protection is required. For full-voltage (delta) ratings above V or V, follow the NEC or CEC rules for group motor applications. Publication A-CA00A-EN-P -

17 Bulletin 0M Motor Circuit Protectors Application Ratings Definition of Type Short Circuit Coordination: The contactor or starter must not endanger persons or plant in the event of a short circuit. No damage to the motor protection device or other parts may occur with the exception of welding of the contactor or starter contacts if these can be easily separated without appreciable deformation (such as with a screwdriver). In the event of short circuit, fast-opening, current-limiting Bulletin 0M Motor Protection Circuit Breakers make it possible to build economical, fully short-circuit coordinated starter combinations with Type coordination. Type Coordination 00V Cat. No. Max. Short Circuit Current [ka] For Use With Contactors Standard Motor Protection High Inrush Motor Protection Motor Circuit Protection 00V Below (or larger) C-Frame 0M-CE-A 0M-CN-A 0 0-C0 0M-CE-A 0M-CT-A 0M-CN-A 0 0-C0 0M-CE-A0 0M-CT-A 0M-CN-A0 0 0-C0 0M-CE-A 0M-CT-A0 0M-CN-A 0 0-C0 0M-CE-B 0M-CT-A 0M-CN-B 0 0-C0 0M-CE-B 0M-CT-B 0M-CN-B 0 0-C0 0M-CE-B 0M-CT-B 0M-CN-B 0 0-C0 0M-CE-B0 0M-CT-B 0 0-C0 0M-CE-B 0M-CT-B0 0 0-C0 0M-CE-C 0M-CT-B 0 0-C0 0M-CE-C 0M-CT-C 0 0-C 0M-CE-C0 0M-CT-C 0 0-C 0M-CE-C 0-C0 0M-CE-C 0-C0 0M-CE-C 0-C D-Frame 0M-DE-B 0M-DN-B 0 0-C0 0M-DE-B0 0M-DN-B0 0 0-C0 0M-DE-B 0M-DN-B 0 0-C0 0M-DE-C 0M-DN-C 0-C0 0M-DE-C 0M-DN-C 0-C 0M-DE-C0 0M-DT-C 0-C 0M-DE-C 0M-DT-C0 0M-DN-C 0 0-C 0M-DE-C 0-C0 0M-DE-C 0M-DN-C 0-C F-Frame 0M-FE-C 0 0-C0 0M-FE-C 0 0-C 0M-FE-C0 0 0-C 0M-FE-C 0M-FN-C 0 0-C0 0M-FE-C 0M-FT-C 0M-FN-C 0 0-C0 0M-FE-C 0M-FT-C 0M-FN-C 0 0-C CMN-Frame 0-CMN-00 0-C 0-CMN C0 0-CMN-00 0-C 0-CMN C Cat. No. 0-C contactors Type only - Publication A-CA00A-EN-P

18 Bulletin 0M Motor Circuit Protectors Application Ratings Type Coordination 0V Cat. No. Max. Short Circuit Current [ka] Standard Motor Protection High Inrush Motor Protection Motor Circuit Protection 0V C-Frame For Use With Contactors Below (or larger) 0M-CE-A 0M-CN-A 0-C0 0M-CE-A 0M-CT-A 0M-CN-A 0-C0 0M-CE-A0 0M-CT-A 0M-CN-A0 0-C0 0M-CE-A 0M-CT-A0 0M-CN-A 0-C0 0M-CE-B 0M-CT-A 0M-CN-B 0-C0 0M-CE-B 0M-CT-B 0M-CN-B 0-C0 0M-CE-B 0M-CT-B 0M-CN-B 0 0-C 0M-CE-B0 0M-CT-B 0 0-C0 0M-CE-B 0M-CT-B0 0 0-C0 0M-CE-C 0M-CT-B 0 0-C0 0M-CE-C 0M-CT-C 0-C0 0M-CE-C0 0M-CT-C 0-C0 0M-CE-C 0-C0 0M-CE-C 0-C0 0M-CE-C 0-C D-Frame 0M-DE-B 0M-DN-B 0-C0 0M-DE-B0 0M-DN-B0 0-C0 0M-DE-B 0M-DN-B 0-C0 0M-DE-C 0M-DN-C 0-C0 0M-DE-C 0M-DN-C 0-C 0M-DE-C0 0M-DT-C 0-C 0M-DE-C 0M-DT-C0 0M-DN-C 0-C 0M-DE-C 0-C0 0M-DE-C 0M-DN-C 0-C F-Frame 0M-FE-C 0-C0 0M-FE-C 0-C 0M-FE-C0 0-C 0M-FE-C 0M-FN-C 0-C0 0M-FE-C 0M-FT-C 0M-FN-C 0-C0 0M-FE-C 0M-FT-C 0M-FN-C 0-C CMN-Frame 0-CMN-00 0-C 0-CMN C0 0-CMN-00 0-C 0-CMN C Publication A-CA00A-EN-P -

19 Bulletin 0M Motor Circuit Protectors Application Ratings Type Coordination 00V Cat. No. Max. Short Circuit Current [ka] Standard Motor Protection High Inrush Motor Protection Motor Circuit Protection 00V C-Frame For Use With Contactors Below (or larger) 0M-CE-A 0M-CN-A 0-C0 0M-CE-A 0M-CT-A 0M-CN-A 0-C0 0M-CE-A0 0M-CT-A 0M-CN-A0 0-C0 0M-CE-A 0M-CT-A0 0M-CN-A 0-C0 0M-CE-B 0M-CT-A 0M-CN-B 0-C0 0M-CE-B 0M-CT-B 0M-CN-B 0-C0 0M-CE-B 0M-CT-B 0M-CN-B 0-C 0M-CE-B0 0M-CT-B 0-C 0M-CE-B 0M-CT-B0 0-C 0M-CE-C 0M-CT-B 0-C0 0M-CE-C 0M-CT-C 0-C0 0M-CE-C0 0M-CT-C 0-C0 0M-CE-C 0-C0 0M-CE-C 0-C0 0M-CE-C 0-C D-Frame 0M-DE-B 0M-DN-B 0 0-C0 0M-DE-B0 0M-DN-B0 0 0-C0 0M-DE-B 0M-DN-B 0 0-C0 0M-DE-C 0M-DN-C 0 0-C0 0M-DE-C 0M-DN-C 0 0-C0 0M-DE-C0 0M-DT-C 0-C0 0M-DE-C 0M-DT-C0 0M-DN-C 0-C0 0M-DE-C 0-C0 0M-DE-C 0M-DN-C 0-C F-Frame 0M-FE-C 0 0-C0 0M-FE-C 0 0-C0 0M-FE-C0 0 0-C0 0M-FE-C 0M-FN-C 0 0-C0 0M-FE-C 0M-FT-C 0M-FN-C 0 0-C0 0M-FE-C 0M-FT-C 0M-FN-C 0-C CMN-Frame 0-CMN-00 0-C 0-CMN C0 0-CMN-00 0-C 0-CMN C - Publication A-CA00A-EN-P

20 Bulletin 0M Accessories Operator Position OFF ON Tripped Term. No. Connection Diagram For Use With Cat. No. O X O - N.O. Aux 0M-C, D, F; 0M-C-AFA X O X - N.C. Aux 0U-D (UL only in combination with 0M-C- AFC) 0M-C-AFA0 Front-Mounted Auxiliary Contact -pole or -pole No additional space required Only per device O X O - N.O. Aux X O X - N.C. Aux O X O - N.O. Aux O X O - N.O. Aux 0M-C, D, F; 0U-D (UL only in combination with 0M-C- AFC) 0M-C-AFA 0M-C-AFA0 X O X - N.C. Aux X O X - N.C. Aux 0M-C-AFA0 O X O - N.O. Aux O X O - N.O. Aux 0M-C, D, F 0M-C-ASA0 Right Side-Mounted Auxiliary Contact -pole Adds mm to the width of the device Two per MPCB X O X - N.C. Aux X O X - N.C. Aux 0M-C, D, F 0M-C-ASA0 O X O - N.O. Aux X O X - N.C. Aux 0M-C, D, F 0M-C-ASA X = Contact Closed; O = Contact Open 0M Operator Overload (thermal) Trip Short-Circuit (magnetic) Trip Publication A-CA00A-EN-P -

21 Bulletin 0M Accessories Front-Mounted Trip Contact -pole Indicates tripping of device No additional space required Right-Side Mounted Trip Contact -pole Indicates tripping of motor protection circuit breaker Adds mm to the width of the circuit breaker One only per MPCB A right-side mounted auxiliary contact may be tandem mounted on top of this trip contact Operator Position OFF ON Tripped Term. No. O X O - N.O. Aux O O X - N.O. Trip (Short-Circuit & Overload) X O X - N.C. Aux O O X - O O X - O O X - O O X - X X O - X X O - O O X - X X O - X X O - Connection Diagram For Use With Cat. No. N.O. Trip (Short-Circuit & Overload) N.O. Trip (Short-Circuit & Overload) N.O. Trip (Short-Circuit) I>> N.O. Trip (Short-Circuit & Overload) N.C. Trip (Short-Circuit) N.C. Trip (Short-Circuit & Overload) N.O. Trip (Short-Circuit) N.C. Trip (Short-Circuit & Overload) N.C. Trip (Short-Circuit) I>> 0M-C, D, F; 0U-D (UL only in combination with 0M-C-AFC) 0M-C, D, F 0M-C, D, F 0M-C, D, F 0M-C, D, F 0M-C-AFARA 0M-C-AFARA0 0M-C-ASARM 0M-C-ASARM0 0M-C-ASAR0M 0M-C-ASAR0M0 O O X - X X O - N.O. Trip (Short-Circuit) N.C. Trip (Short-Circuit) 0M-C, D, F 0M-C-ASAM X = Contact Closed; O = Contact Open 0M Operator Overload (thermal) Trip Short-Circuit (magnetic) Trip - Publication A-CA00A-EN-P

22 Bulletin 0M Accessories Accessories Screwless Operator Position OFF ON Tripped Term. No. Connection Diagram For Use With Cat. No. O X O - N.O. Aux 0M-RC-AFA Front-Mounted Auxiliary Contact -pole or -pole No additional space required - Only per MPCB 0M-C, D, F; 0M-RC X O X - N.C. Aux 0M-RC-AFA0 O X O - N.O. Aux X O X - N.C. Aux O X O - N.O. Aux 0M-C, D, F; 0M-RC 0M-RC-AFA O X O - N.O. Aux 0M-RC-AFA0 Front-Mounted Trip Contact -pole Indicates tripping of device No additional space required O X O - N.O. Aux O O X - N.O. Trip (Short-Circuit & Overload) X O X - N.C. Aux O O X - N.O. Trip (Short-Circuit & Overload) 0M-C, D, F; 0M-RC 0M-RC- AFARA0 0M-RC- AFARA X = Contact Closed; O = Contact Open 0M Operator Overload (thermal) Trip Short-Circuit (magnetic) Trip Publication A-CA00A-EN-P -

23 Bulletin 0M Accessories Operator Position OFF ON Tripped Term. No. Connection Diagram For Use With Cat. No. O X O - N.O. Aux 0-CMN 0-CA0 O X O - N.O. Aux Front-Mounted Auxiliary Contact Internal -pole per MPCB X O X - N.C. Aux X O X - N.C. Aux 0-CMN 0-CA0 0-CMN 0-CA0 O X O - N.O. Aux X O X - N.C. Aux 0-CMN 0-CA O O X - O O X - N.O. Trip (Overload) N.O. Trip (Short-Circuit) a) Overload Trip b) Short-Circuit Trip 0-CMN 0-CT- X X O - N.C. Trip (Overload) 0-CMN 0-CT0-0 Front-Mounted Trip- Indicating Auxiliary Contact Internal -pole per MPCB X X O - X X O - N.C. Trip (Short-Circuit) N.C. Trip (Overload) a) Overload Trip b) Short-Circuit Trip O O X - N.O. Trip (Short-Circuit) a) Overload Trip b) Short-Circuit Trip 0-CMN 0-CT0- O O X - X X O - N.O. Trip (Overload) N.C. Trip (Short-Circuit) a) Overload Trip b) Short-Circuit Trip 0-CMN 0-CT-0 X = Contact Closed O = Contact Open 0M Operator Overload (thermal) Trip Short-Circuit (magnetic) Trip -0 Publication A-CA00A-EN-P

24 Bulletin 0M Accessories Connection Diagram Trip Rating For Use With Cat. No. V, 0 Hz 0M-C-UXJ V, 0 Hz 0M-C-UXK 0V, 0 Hz 0M-C-UXD Undervoltage Trip V, 0 Hz 0M-C-UXC Left-side mounted Adds mm to the width 0V, 0 Hz 0M-C-UXH of the circuit breaker 0 0V, 0 Hz 0M-C-UXF 0M-C, D, F Automatically trips 0 0V, 0 Hz 0M-C-UXA MPCB/MCP when voltage falls below V, 0 Hz 0M-C-UXT 0% 0 00V, 0 Hz 0M-C-UXN 0V, 0 Hz/V, 0 Hz 0M-C-UXB V, 0 Hz/00V, 0 Hz 0M-C-UXM 00V, 0 Hz 0M-C-UXVC V, 0 Hz 0M-C-UCJ V, 0 Hz 0M-C-UCK Undervoltage Trip 0V, 0 Hz 0M-C-UCD Left-side mounted V, 0 Hz 0M-C-UCC early make contacts integrated 0V, 0 Hz 0M-C-UCH Adds mm to the width 0 0V, 0 Hz 0M-C-UCF 0M-C, D, F of the circuit breaker 0 0V, 0 Hz 0M-C-UCA Automatically trips MPCB/MCP when V, 0 Hz 0M-C-UCT voltage falls below 0 00V, 0 Hz 0M-C-UCN 0% 0V, 0 Hz/V, 0 Hz 0M-C-UCB V, 0 Hz/00V, 0 Hz 0M-C-UCM 00V, 0 Hz 0M-C-UCVC V, 0 Hz 0M-C-SNJ V, 0 Hz 0M-C-SNK V, 0 Hz/0V, 0 Hz 0M-C-SND 0V, 0 Hz 0M-C-SNH Shunt Trip Left-side mounted 0 0V, 0 Hz 0M-C-SNF Adds mm to the width 0 0V, 0 Hz 0M-C-SNA 0M-C, D, F of the circuit breaker V, 0 Hz 0M-C-SNT Provides remote tripping of the MPCB/MCP 0 00V, 0 Hz 0M-C-SNN 0V, 0 Hz/V, 0 Hz 0M-C-SNB V, 0 Hz/00V, 0 Hz 0M-C-SNM 00V, 0 Hz 0M-C-SNVC V DC 0M-C-SNZJ Undervoltage Trip Unit Internal, front-mounted Integrated short-circuit trip indication Automatically trips MPCB when voltage falls below 0% b) Short-Circuit Trip V, 0/0 Hz 0-CUV-KJ V, 0 Hz/0V, 0 Hz 0-CMN 0-CUV-D 0V, 0 Hz/0V, 0 Hz 0-CUV-A Shunt Trip Unit Internal, front-mounted Integrated short-circuit trip indication Provides remote tripping of the MPCB b) Short-Circuit Trip V, 0/0 Hz 0-CRT-KJ V, 0 Hz/0V, 0 Hz 0-CMN 0-CRT-D 0V, 0 Hz/0V, 0 Hz 0-CRT-A 0M Operator Overload (thermal) Trip Short-Circuit (magnetic) Trip Publication A-CA00A-EN-P -

25 Bulletin 0M Accessories For Use With Cat. No. Anti-Tamper Shield Provides protection against inadvertent adjustment of the current setting pcs/pkg 0M-C, D, F 0M-C-CA Lockable Twist Knob For one padlock mm (/ in.) Ø shackle Can be locked in OFF position Locking Tag Padlock attachment to the lockable handles Up to three padlocks mm (/ in.) Ø shackle Black Red/Yellow 0M-C, D, F; 0U-D 0M-C-KN, 0M-C-KRY 0M-C-KN 0M-C-KRY 0M-C-M Padlockable Operating Knob Accepts mm (/ in.) Ø padlock shackle up to three padlocks Permits padlocking in the off position Door Coupling Handle For padlocks mm (/ in.) in diameter IP Protection/Type,, X, Interlock override capability Can be modified for locking in ON position Ships with coupling order extension shaft and legend plate separately Mounting depth (front of DIN Rail to front of enclosure door): - 0M-C:. mm ± mm (. in. ± / in.) - 0M-D:. mm ± mm (. in. ± / in.) - 0M-F:. mm ± mm (. in. ± / in.) - 0-CMN: mm +/- mm (. in. +/- / in.) Legend Plate Marking: "Hauptschalter" and "Main Switch" Marking: "Not-Aus" and "Emergency Off" Extension Shaft Cut to required length for mounting depth (front of DIN Rail to front of enclosure door): - 0M-C: mm (... in.) - 0M-D: mm (.0.. in.) - 0M-F: mm (... in.) - 0-CMN: 0 0 mm (... in.) Extension Shaft (Extended Length) Cut to required length for mounting depth (front of DIN Rail to front of enclosure door): - 0M-C: mm (.. in.) - 0M-D: mm (.0. in.) - 0M-F: mm (. 0. in.) - 0-CMN: 0 mm (.. in.) Black Red/Yellow Black Red/Yellow 0-CMN 0M-C, D, F 0-CMN 0M-C, D, F 0-CMN 0-CDN 0-CDRY 0M-C-DN, 0M-C-DRY, 0-CDN, 0-CDRY 0M-C-DN, 0M-C-DRY, 0-CDN, 0-CDRY 0-KN 0-KRY 0M-C-DN 0-CDN 0M-C-DRY 0-CDRY 0M-C-DFCN 0M-C-DFCRY 0M-C-DS 0M-C-DSL Coupler Included with Cat. Nos. 0M-C-DN and 0M-C-DRY 0M-C, D, F; 0U-D 0M-C-DNC IP Non-Metallic Enclosure Knockouts for M0 and M fittings Suitable for flexible cable with internal ground wire or conduit when externally grounded around the outside of the enclosure (no UL/CSA approval) Black Handle Red/Yellow Handle 0M-C 0M-C E-AYTG E-AYTJ Screw Adapter For screw arrangement of a motor protection circuit breaker pcs/pkg 0M-C, D, F; 0U-D 0M-C-N - Publication A-CA00A-EN-P

26 Bulletin 0M Accessories For Use With Cat. No. ECO Connecting Module A For DOL and reversing starters Eco-starters mount on single DIN Rail (0M on DIN Rail) Electrical and mechanical interconnection of 0M and 0-K contactors ECO Connecting Modules A Eco-starters mount on single DIN Rail (0M on DIN Rail) Electrical and mechanical interconnection of 0M MPCB and 0-C (with AC coils or V DC electronic coils) contactors ECO Connecting Modules A Eco-starters mount on single DIN Rail (0-C on DIN Rail) Electrical and mechanical interconnection of 0M MPCB and 0-C (with AC or DC coils) Connecting Modules and A Contactor and MPCB MUST BE mounted separately on () DIN Rails Electrical and mechanical interconnection of 0M and 0-C (with AC coils) Coil Modules A and A For use with Bulletin T/T -component starters Spacing Adapter Required for self-protected combination motor controller (Type E) applications of Bul. 0M-C, -D, and -F MPCBs. Not for use with bus bars. 0M-C to 0-K 0M-C to 0-C0 C 0M-D to 0-C0 C 0M-C, 0M-D to 0- C0 C 0M-C to 0-C0 C 0M-D to 0-C0 C 0M-D to 0-C0 C 0M-F to 0-C0 C 0M-F to 0-C 0M-C, -D to 0- C0 C 0M-D, -F to 0- C0 C 0M-C, -D 0M-F 0M-C-PEK 0M-C-PEC 0M-D-PEC 0M-C-PECA 0M-C-PNC 0M-D-PNC 0M-D-PNC 0M-F-PNC 0M-F-PNC 0M-C-PSC 0M-F-PSC 0M-C-TE 0M-F-TE Feeder Block for Compact Busbar Supply of compact busbars Increases terminal capacity 0M-C 0M-F 0M-C-WBE 0M-F-WBE Feeder Terminal for Compact Busbar For supply of compact busbars Top feed overlaps compact busbar Meets IEC spacing requirements Feeder Terminal for Compact Busbar For supply of compact busbars Top feed overlaps compact busbar Meets UL Type E spacing requirements Three-Phase Compact Busbar for A Motor Protection Circuit Breakers A Max. Continuous Current mm spacing For use with front-mounted auxiliary contact Three-Phase Compact Busbar for A Motor Protection Circuit Breakers A Max. Continuous Current mm spacing For use with side-mounted auxiliary contact Three-Phase Compact Busbar for A Motor Protection Circuit Breakers A Max. Continuous Current mm spacing For use with front-mounted auxiliary contact Three-Phase Compact Busbar for A Motor Protection Circuit Breakers A Max. Continuous Current mm spacing For use with side-mounted auxiliary contact Terminal Cover For covering of unused compact bus bar terminals IPX finger protection 0M-C, -D 0M-C, -D 0M-F 0M-C-WTN 0M-C-WTEN 0M-F-WTE connections 0M-C-WN connections 0M-C-WN 0M-C, -D connections 0M-C-WN connections 0M-C-WN connections 0M-C-WN connections 0M-C-WN 0M-C, -D connections 0M-C-WN connections 0M-C-WN connections 0M-F-W connections 0M-F 0M-F-W connections 0M-F-W connections 0M-F-W connections 0M-F 0M-F-W connections 0M-F-W 0M-C, 0M-D 0M-C-WSN 0M-F 0M-F-WS Top Hat Rail Adpapter mm Adjusts the depth of the 0M-C to the 0M-D Allows the use of compact busbars accross both frame sizes Must be ordered in multiples of 0M-C 0-KBH Notes:. See Bulletin 0U for Internal and External Accessories for Bulletin 0M-H, J, L and N frames.. Bulletin 0M-I frame Accessories such as auxiliaries, alarms, undervoltage and shunt trips are only available as factory installed modifications. See page -. Publication A-CA00A-EN-P -

27 Bulletin 0M Accessories For Use With Pkg. Quantity Cat. No. Terminal End Cover 0. in. 0U-I-TC 0M-I Terminal End Cover 0. in. 0U-I-TC Terminal Shields (Plastic) IP0 Ingress Protection Padlockable Handle Lock Hasp Off only Padlocking Hasp Lock-OFF only End Cap Kit Provides -phase connections for terminal or bolt-on connections Metric Hardware Phase Barriers Provides additional phase clearance when special connections are required 0M-I 0U-I-TS 0M-I 0U-I-PL 0M-I 0U-I-ECM 0M-I 0U-I-PB Terminal Lugs Steel Terminal Copper/Aluminum wire #-/0 AWG Terminal Lugs Stainless Steel Terminal Copper/Aluminum wire #-/0 AWG Rotary Close Couple Handle International Black handle Rotary Close Couple Handle International Red/Yellow handle 0M-I 0M-I 0U-I-TLS 0U-I-TLS 0U-I-RCB 0U-I-RCR Operating Mechanism for External Handles 0M-I -H External Handles Black/Grey IP (Type /R//X/) Red/Yellow IP (Type /R//X/) Black/Grey IP (Type ) Red/Yellow IP (Type ) 0M-I 0-HM 0-HME 0-HM 0-HME Overload Pre-trip Auxiliary Contact (AX) Opens contactor coil circuit on overload before MPCB trips (Automatic reset) 0M-J, -L (MPCB only) 0U-J-ERRX - Publication A-CA00A-EN-P

28 Bulletin 0M Accessories For Use With Pkg. Quantity Cat. No. Extension Shafts Standard Enclosure Working Depth [mm (in.)] Minimum 0 () R-R Maximum 0 () 0M-I Extended Minimum 0 () R-R Maximum 0 (0) Flex-Cable Operating ft. (0. m) Cable 0U-I-FCX0 Mechanism ft. (. m) Cable 0U-I-FCX0 NEMA Type ////X ft. (. m) Cable 0U-I-FCX0 Flange-Mount Handle ft. (.0 m) Cable 0U-I-FCX Flex-Cable Operating ft. (0. m) Cable 0M-I 0U-I-FCS0 Mechanism ft. (. m) Cable 0U-I-FCS0 Stainless Steel - Type /X ft. (. m) Cable 0U-I-FCS0 Flange Mount Handle ft. (.0 m) Cable 0U-I-FCS DIN (#) symmetrical hat rail x. x m 0M-D 0M-F 0-C all pcs/kg -DR DIN (#) Symmetrical Rail mm x mm x m long Top Hat Rail (DIN # Symmetrical Rail) 0M-C 0M-D 0M-F 0-CMN pcs/kg -DR Publication A-CA00A-EN-P -

29 Bulletin 0M Modifications 0M Factory Modifications (Open) Note: For modifications add (option code _) for desired features to cat. no. Available in North America only. f Miscellaneous Code Frame Size KN() Black Lockable Knob C, D, F, CMN KRY() Red/Yellow Lockable Knob C, D, F, CMN TE() Spacing Adapter for Self- Protected Starters (Type E) C, D, F MT STD Bus Bar Mount, Top C, D, F, H, CMN MU STD Bus Bar Mount, Universal J, K, L st Code st Code X Bottom Front Bottom Front Placeholder Only available on MCPs. J- and L-Frame MPCB only. g Aux / Trip Contacts - C, D, F g nd Code Aux / Trip Contacts - H, J, L nd Code X C R F N T Right Side X Placeholder X Placeholder A N.C. C N.O. + N.C. B N.O. D N.O. C N.O. + N.C. E N.C. D N.O. K N.C. (SC+OL) + N.C. (SC) E N.C. L N.O. (SC+OL) + N.O. (SC) R N.C. + N.O. (SC+OL) M N.C. (SC+OL) + N.O. (SC) S N.O. + N.O. (SC+OL) N N.O. (SC+OL) + N.C. (SC) st Code Bottom Front g Q Aux / Trip Contacts - CMN nd Code N.O. (SC) + N.C. (SC) Top Front X Placeholder X Placeholder C N.O. + N.C. K N.C. (OL) + N.C. (SC) D N.O. L N.O. (OL) + NO (SC) E N.C. M N.C. (OL) + N.O. (SC) Cannot be combined with option "h". N N.O. (OL) + N.C. (SC) Right Side Placeholder N.O. + N.C. N.O. + N.C. (Overload Function) N.O. + N.C. N.O. (SC+OL) + N.C. (SC) N.O. + N.C. and N.O. + N.C. (SC+OL) st Code st Code Left Side h UV and Shunt Trips - C, D, F nd Code Voltage G Undervoltage Trip J V AC, 0 Hz P Left Side Only available on MCPs. Shunt Trip g Aux / Trip Contacts - I, N nd Code K D C H F A T N B VC M ZR ZQ ZJ ZW ZY ZZ ZB ZG ZE Right Side X Placeholder X Placeholder C N.O. + N.C. C N.O. + N.C. F N.O. + N.C. F N.O. + N.C. N N.O. (SC+OL) + N.C. (SC) N N.O. (SC+OL) + N.C. (SC) T N.O. + N.C. and N.O. + N.C. (SC+OL) T N.O. + N.C. and N.O. + N.C. (SC+OL) V AC, 0 Hz 0V AC, 0 Hz V AC, 0 Hz 0V AC, 0 Hz 0 0V AC, 0 Hz 0V AC, 0 Hz V AC, 0 Hz 0 00V AC, 0 Hz 0V AC, 0 Hz and V AC, 0 Hz 00V AC, 0 Hz V AC, 0 Hz and 00V AC, 0 Hz V DC V DC V DC V DC V DC 0V DC V DC V DC 0V DC - Publication A-CA00A-EN-P

30 Bulletin 0M Modifications 0M Factory Modifications (Open) Note: For modifications add (option code _) for desired features to cat. no. Available in North America only. st Code Top Front h UV and Shunt Trips - CMN nd Code G Undervoltage Trip KJ P Shunt Trip Cannot be combined with option "g". st Code G P Left Front Undervoltage Trip Left Front Shunt Trip h D A UV and Shunt Trips - H, J, L nd Code J D A B C J D B Voltage V AC, 0 Hz and V AC, 0 Hz 0V AC, 0 Hz and V AC, 0 Hz 0V AC, 0 Hz and 0 0V AC, 0 Hz UV Voltage V AC/DC V AC 0 0V AC 0 00V AC 00V AC Shunt Voltage 0V AC/DC 0V AC/DC 0 00V AC st Code G P st Code G P Left Front Undervoltage Trip Left Front Shunt Trip Left Front Undervoltage Trip Left Front Shunt Trip h UV and Shunt Trips - I h nd Code UV and Shunt Trips - N J D A B J D N B nd Code J D A B J D N B UV Voltage V AC V AC 0 0V AC 0 0V AC Shunt Voltage V AC/DC V AC and 0V DC 0 0V AC and V DC 00V AC and 0 0V DC UV Voltage V AC V AC 0 0V AC 0 0V AC Shunt Voltage V AC/DC 0V AC and V DC 0 0V AC and 0 0V DC 0 00V AC Publication A-CA00A-EN-P -

31 Bulletin 0M Specifications IEC Performance Data Cat. No. 0M-CE- A A A0 A B B B B0 B C C C0 C C C Rated Operational Current, I e [A] Magnetic Release Current [A] Switching of Standard Three-Phase Motors AC- 0/0V [kw] /V [kw] V [kw] V [kw] Back-Up Fuses gg, gl, only if I cc I cu 0/0V [A] /V [A] /0V [A] V [A] V [A] Ultimate Short Circuit Breaking Capacity I cu 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] Rated Service Short Circuit Breaking Capacity I cs 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] No back-up fuse required. - Publication A-CA00A-EN-P

32 Bulletin 0M Specifications IEC Performance Data, Continued Cat. No. 0M-DE- Cat. No. 0M-FE- B B0 B C C C0 C C C C C C0 C C C Rated Operational Current, I e [A] Magnetic Release Current [A] Switching of Standard Three-Phase Motors AC- 0/0V [kw] /V [kw] V [kw] V [kw] Back-Up Fuses gg, gl, only if I cc I cu 0/0V [A] 00/V [A] /0V [A] V [A] V [A] Ultimate Short Circuit Breaking Capacity I cu 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] Rated Service Short Circuit Breaking Capacity I cs 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] No back-up fuse required. Publication A-CA00A-EN-P -

33 Bulletin 0M Specifications IEC Performance Data, Continued 0-CMN- Cat. No Rated Operational Current, I e [A] 0 0 Magnetic Release Current [A] Switching of Standard Three-Phase Motors AC- 0/0V [kw]./. / /0 / 00/V [kw]./ / / / 00V [kw] /./ 0/0 / 0V [kw] / /0 / / Back-up fuses gg, gl,, only if I cc I cu 0/0V [A] 00/V [A] V [A] V [A] Ultimate short-circuit breaking capacity I cu 0/0V [ka] /V [ka] 0 00V [ka] V [ka] Rated service short-circuit breaking capacity I cs 0/0V [ka] /V [ka] V [ka] 0 0V [ka] No back-up fuse required. Power ratings: Preferred values according to IEC Publication A-CA00A-EN-P

34 Bulletin 0M Specifications IEC Performance Data, Continued Cat. No. 0M-CN- A A A0 A B B B Rated Operational Current, I e [A] Magnetic Release Current [A].... Switching of Standard Three-Phase Motors AC- 0/0V [kw] /V [kw] V [kw] V [kw] Back-Up Fuses gg, gl, only if I cc I cu 0/0V [A] 00/V [A] 0/0V [A] 00V [A] 0V [A] 0 Ultimate Short Circuit Breaking Capacity I cu 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] Rated Service Short Circuit Breaking Capacity I cs 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] No back-up fuse required. Publication A-CA00A-EN-P -

35 Bulletin 0M Specifications IEC Performance Data, Continued Cat. No. 0M-DN- Cat. No. 0M-FN- B B0 B C C C C C C C Rated Operational Current, I e [A]..0. Magnetic Release Current [A] 0 0 Switching of Standard Three-Phase Motors AC- 0/0V [kw] /V [kw] V [kw] V [kw] Back-Up Fuses gg, gl, only if I cc I cu 0/0V [A] 0 00/V [A] 0 0 0/0V [A] V [A] V [A] Ultimate Short Circuit Breaking Capacity I cu 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] Rated Service Short Circuit Breaking Capacity I cs 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] No back-up fuse required. - Publication A-CA00A-EN-P

36 Bulletin 0M Specifications IEC Performance Data, Continued Cat. No. 0M-CT- A A A0 A B B B B0 B C C Rated Operational Current, I e [A] Magnetic Release Current [A] Switching of Standard Three-Phase Motors AC- 0/0V [kw] /V [kw] V [kw] V [kw] Back-Up Fuses gg, gl, only if I cc I cu 0/0V [A] 00/V [A] 0 0/0V [A] 0 00V [A] 0 0 0V [A] Ultimate Short Circuit Breaking Capacity I cu 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] Rated Service Short Circuit Breaking Capacity I cs 0/0V [ka] /V [ka] /0V [ka] V [ka] V [ka] No back-up fuse required. Publication A-CA00A-EN-P -

37 Bulletin 0M Specifications IEC Performance Data, Continued Cat. No. 0M-DT- Cat. No. 0M-FT- C C0 C C Rated Operational Current, I e [A] 0 Magnetic Release Current [A] 0 Switching of Standard Three-Phase Motors AC- 0/0V [kw] /V [kw]. 00V [kw] 0 0V [kw] 0 Back-up fuses gg, gl,, only if I cc I cu 0/0V [A] 00/V [A] /0V [A] V [A] V [A] 0 0 Ultimate short-circuit breaking capacity I cu 0/0V [ka] /V [ka] 0 0/0V [ka] 0 00V [ka] V [ka] Rated service short-circuit breaking capacity I cs I cs 0/0V [ka] /V [ka] 0 0 0/0V [ka] V [ka] 0 0 0V [ka] No back-up fuse required. Consult your local Rockwell Automation sales office or Allen-Bradley distributor. - Publication A-CA00A-EN-P

38 Bulletin 0M Specifications General Data Rated Insulation Voltage U i Cat. No. 0M-C 0M-D 0M-F 0-CMN IEC, SEV, VDE 00 [V] 0 0 UL, CSA [V] Rated Impulse Withstand Voltage U imp Pollution degree Main circuits U imp /Overvoltage Category kv/iii kv/iii Auxiliary circuits U imp /Overvoltage Category kv/iii kv/iii Rated Frequency [Hz] 0/0 0 0 Utilization Category IEC 0- (Circuit breaker) A A IEC 0-- (Motor starter) AC- AC- Life Span Mechanical [operations] Electrical (I e max.) [operations] (up to A) 000 (up to 0 A) Switching Frequency [operations/h] max. max. 0 Ambient Temperature Storage [ C] Operation [ C] - +0 Climatic resistance Moisture change climate (000--0) C / % relative humidity and 0 C / % relative humidity, cycles Dry heat (00--) 0 C, relative humidity <0 %, days Moisture heat (00--) 0 C, relative humidity %, days Site Altitude [m] to 000 N.N. Protection Class IPX, when wired Resistance to Shock, Transport (00--) 0 g, ms, all axes 0, ms Resistance to Vibration, Opertion (00--) g Rated Thermal Current I th up to 0 C ambient temperature [A] up to 0 C ambient temperature [A] Rated Supply Current I e [A] Dependence on Temperature 0 C [A] no reduction 0 C [A] no reduction 0 C [A] no reduction 0 C [A] % current reduction of the upper rated current I e Overload Protection Characteristics IEC 0-- Motor protection (except Cat. Nos. 0M-CN, 0M-DN, 0M-FN) IEC 0 Ambient Temperature Compensation [ C] Phase-loss Protection Differential release Trip class (except Cat. Nos. 0M-CN, 0M-DN, 0M-FN) fixed setting Magnetic Release Release current (+/-0 %) fixed setting x I e max. (for 0M-CE, 0M-DE, 0M-FE, 0M-CN, 0M-DN, 0M-FN) x I e max. (for 0M-CT, 0M-DT, 0M-FT) I e max. = maximum values of setting ranges fixed setting x I e max. Total Power loss P v Circuit Breaker at rated load operating temperature [W].. Main Disconnect Switch Application Yes, with accessories For utilization outside North America, assemblies (of products) shall comply to the IEC - requirements Application Conditions 0M manual motor starters are intended for use in closed areas without hazardous operating conditions such as dust or explosive or corrosive gases. Enclosures of appropriate manner need to be in place to protect devices in such environments. Publication A-CA00A-EN-P -

39 Bulletin 0M Specifications General Data, Continued Conformity to Standards Cat. No. 0M-C 0M-D 0M-F 0-CMN IEC 0-; -; --; EN 0-; -; --; UL 0; CSA., No. IEC 0-; -; EN 0-; -; UL 0; CSA., No. Approvals CE, UL, CSA CE, UL, CSA Terminal Parts Type of terminals Screwdriver Pozidriv No. /Blade No. Pozidriv No. /Blade No.. conductor. conductor. conductor. conductor. conductor. conductor. conductor. conductor [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] /No. /No. /No. /No.. /No.. /No. /No. /No.. /No.. /No.. /No.. /No. /No. /No.. /No.. /No... 0 / 0 / Tightening torque [Nm]/[lb in]././ 0 / 0 Screwless Cat. No. 0M-RC Terminal Parts Type of terminals Screwdriver. conductor. conductor. conductor. conductor. conductor. conductor Accessories for Bulletin 0M Motor Protection Circuit Breakers Rated Thermal Current I th at 0 C ambient temperature at 0 C ambient temperature Contact Class Coordination According to NEMA (UL/CSA Standards) [A] [A] AC DC Auxiliary Contact Blocks for Front Mounting Cat. No. 0M-C-AFA, 0M-C-AFAR B 00 Q 00 Auxiliary Contact Blocks for Right-Side Mounting Cat. No. 0M-C-ASA, 0M-C-ASAR Back-Up Fuses gg, gl [A] Rated Supply Current [V] AC- [A]. 0. DC- [V] [A] Terminal Parts Type of terminals Screwdriver Pozidriv No. /Blade No.. conductor. conductor. conductor. conductor. conductor. conductor [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm ]/[AWG] [mm]/[awg] [mm]/[awg] [mm]/[awg] [mm]/[awg] [mm]/[awg] [mm]/[awg] / 0../ 0../No. 0../No. /No. /No. 0../ 0../ 0../ 0../ 0../ 0../ B 00 Q / 0../ 0../ 0../ 0../ 0../ Tightening torque [N m]/[lb in]../.../.. - Publication A-CA00A-EN-P