Configurable universal transducer for all power current variables and for mains synchronization PT - SU ENA10/ EN

Transcription

1 PT S EA08.54 E Configrable niversal transdcer for all power crrent variables and for mains synchronization Configrable transdcer for all power crrent variables, I, P, Q, S, cosφ, sinφ, φ, f 4 analog otpts and binary otpt 4 integrated energy conters Comparison of two mains voltages in terms of amplitde, freqency and phase (synchronoscope) Electrical safety to IEC standards Class 0.5 Different characteristics Correct reslts even with distorted sinsoidal inpt signal Parameterization and commnication via standard interface serfriendly parameterization software with online display of all variables

2 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Technical data Inpt Rated crrent A; A Rated voltage : 0 V < < 90 V or : 50 V < < 500 V : 5 V < < 490 V or : 00 V < < 850 V Measring range see ordering information Rated freqency 6 ⅔ Hz ± 0 % Internal power consmption Crrent inpt appro. 0.5 VA Voltage inpt appro..5 ma Overload capacity Crrent inpt: permanent I short term 40 I, however I Voltage inpt: ma. 00 A s permanent.5 however ma. 570 V ( ) short term 4 s Otpt mber of otpts mav switchable and binary or mav switchable and binary or 4 mav switchable and binary Crrent otpts adjstable between ± ma and ± 0 ma Crrent limit: ma. < 0 ma oad: RA 5 VIA Voltage otpts adjstable between ± V and ± 0 V Voltage limit: A ma. 7 V for RA Crrent limit: < 50 ma oad: RA > 5 kω Residal ripple < 0.5 % (peaktopeak) Response time s (adjstable via parameterization) Binary otpt (open collector) Plse otpt plsesh Rating 4 V DC00 ma Plse dration 0 ms oad 80 Ω Shortcircit proof Variables Crrent: Voltage: Active power: Reactive power: (sinsoidal signals) Reactive power: (nonsinsoidal signals) Apparent power: Freqency: cosφ: (sinsoidal signals) I, I, I,,,,, Mains Mains with synchronoscope Ptotal, P, P, P, with display of the energy direction (consmptiongeneration) Qtotal, Q, Q, Q with indication of capacitiveindctive load Qtotal, Q, Q, Q, withot sign Stotal, S, S, S Measrement in crrent or voltage path or F MainsFMains with synchronoscope with indication of capacitiveindctive load Active power factor: vale only, no load indication (nonsinsoidal signals) sinφ: (sinsoidal signals) with sign Reactive power factor: vale only (nonsinsoidal signals) Interfaces Serial front interface (SRS ) Optional fieldbs interface (RS 485) Commnication protocol MODBS RT Transient response Error limit ± 0.5 % Reference conditions F, IF I Freqency f ± % Form factor. Power factor (P: cosφ, Q: sinφ ) Power spply H ± % oad for IA: 0.5 R A ma. Ambient temperatre C ± Warmp time appro. 0 min. Effects Overranging.fold: 0. %, fold: 0.5 % Crve shape: crest factor...6 (parameterizable) Power spply: 0.05 % Eternal magnetic field: 0.5 % p to 400 Am Temperatre: 0. %0 Phase angle: Energy conter: φ, φ, φ, φtotal, φmains φmains with synchronoscope 4 independend conters (parameterizable) for crrent, active power (consmptiongeneration), reactive power (indctivecapacitive), apparent power Page of 9

3 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Technical data Power spply Voltage range: V ACDC 4 V ACDC Hosing, Monting, Connection Srface monting case AC: V; Hz; 5 VA DC: V; 5 VA AC: V; Hz; 5 VA DC: V; 5 VA Material hardly inflammable plastic (to V 94V), halogen free Connection terminals Crrent inpt 4 mm Others.5 mm Type of protection Hosing IP 40 Terminals IP 0 Weight appro kg Dimensions (W H D) 05 mm 95 mm 0 mm 9" plgin card Color Grey RA 70 Connection pin blade connector, type D and mltipoint connector for crrent connection Weight appro. 0.7 kg Monting width T (appro. 60 mm) General and safety data Basic standard for power transdcer to DI E or IEC 688 Safety information to DI E 600 or IEC 00 Test voltage inpt against otpt 5.55 kv, 5060 Hz Rated voltage against earth < 570 V doble, < 000 V basic inslation Degree of polltion Overvoltage category III against otpt III against inpt and power spply Otpt circits, interfaces For voltages < 570 V all otpt circits and the interfaces are fnctional etralow voltage circits to DI VDE 000, Part 40 (PEV). The safe isolation of these circits meets reqirements to DI VDE 006, Part 0. Electromagnetic compatibility to E 5008 or IEC 0004 Radio sppression to DI E 550 Mechanical capability Tested to DI IEC 687 and 686 Shoc: 0 g, ms Vibrations: g, Hz Environmental capabilities Climatic category to DI IEC 7 or DI E 607 Ambient temperatre range (5 to DI IEC 7) C Storage temperatre range (4 to DI IEC 7) C; light condensation allowed Page of 9

4 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Ordering information Type S Design Srface monting case Catalog o. V845A ER 00,00 Deliv. time wks. Measring circit Threephase nbalanced load (niversal type) or synchronoscope 4 Inpt variables Rated voltage ( : 0 V < < 90 V resp. : 50 V < < 500 V) Rated crrent (0. A < I <.5 A) Rated crrent ( A < I < 7.5 A) Power spply V ACDC 4 V ACDC Otpt modles 50,00 4 mav; binary Interface RS 485 interface + S interface Page 4 of 9

5 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Ordering information Accessories IBISE parameterization software diskette " Connection cable for RS S interface Certificate qality certificate DI (certificate of conformity) qality certificate DI (with test point recording) ZAV ZAV ER 88,00 ** 7,00 ** Deliv. time Special calibration factor Factory parameterization Tag o. (ma. characters) Measring circit Singlephase alternating crrent (~) wire threephase balanced load ( ~ E) wire threephase balanced load with simlated phase ( ~ E) wire threephase nbalanced load ( ~ E) 4wire threephase balanced load ( ~ E) 4wire threephase nbalanced load ( ~ E) Synchronoscope: comparision of two mains voltages with star voltage Synchronoscope: comparision of two mains voltages with delta voltage Inpt variables Crrent direct (0. A < I < 7.5 A) Via crrent transformer: primarysecondary crrent Voltage direct ( : 0 V < < 90 V resp. : 50 V < < 500 V) (clear tet) (clear tet) (clear tet) (clear tet) MS MS MS MS4 MS5 MS6 MS7 MS8 I I ER 86,00 ** Deliv. time Via voltage transformer: primarysecondary voltage Rated freqency 50 Hz 60 Hz 400 Hz (see o. 5) Options other nominal freqency additionally parameterizable 400 Hz (clear tet) F F F4 5 80,00 ** 80,00 ** for measring variables ( o.) Measring variable Measring variable Measring variable voltage crrent active power MainsMains Measring variable reactive power (sinsoidal) Q total (ph.) Q Q Q QP Q Q Q I I I Measring variable reactive power factor (sinsoidal) sinφ total sinφ sinφ sinφ I I I (ph.) BP B B B P total (ph.) P P P Measring variable reactive power (nonsinsoidal) Qn total (ph.) Q Q Q PP P P P P Measring variable active power factor (sinsoidal) cosφtotal cosφ cosφ cosφ (ph.) CP C C C Measring variable reactive power factor (non sinsoidal) QF total (ph.) QF QF QF GP G G G Measring variable active power factor (nonsinsoidal) PFtotal (ph.) DP PF PF PF Measring variable apparent power S total (ph.) S S S D D D SP S S S Measring variable freqency f crrent f crrent f crrent f voltage f voltage f voltage f MainsMains FC FC FC FV FV FV F Measring variable phase angle (sinsoidal) φtotal (ph.) AP φ φ φ φmainsmains A A A A Page 5 of 9

6 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Analog otpt (E0) o. E0 Measred variable A: see page 5 o. Otpt signal (mav) Start E0 A0 ink point E05 A05 Final vale E07 Eample: active power in the threephase system, measring range MW, otpt ma; E0: PP 0 +0 MW 0 +0 ma Analog otpt (E) o. Measred variable A: o. Otpt signal (mav) Eample: voltage Analog otpt (E) E see page 5 Start E A ink point E5 A5 A07 Final vale E7, measring range V, kink point at 50 V, otpt V, kink at V; E: V A7 nit nit Response time ( ms) A09 Response time ( ms) Start ink point Final vale nit Response time o. E E E5 E7 ( ms) Measred variable A: see page 5 o. A A5 A7 A9 Otpt signal (mav) Eample: cosφ total in the threephase system, measring range 0.5 kap ind., otpt ma; E: CP 0.5 kap. 0.5 ind. 4 0 ma Analog otpt 4 (E5) o. Measred variable A4: o. Otpt signal (mav) E5 see page 5 Start E5 A5 Eample: crrent in, measring range A, otpt ma; Binary otpt (E) as plse otpt o. Measred variable A4P: E see page 5 ink point E55 A55 Plse A7 Plses per time nit, ma plsesh) Eample: active power in the phase system, MW, 0 plses MWh; Binary otpt (E4) as alarm otpt o. Measred variable A4G: E4 see page 5 Vale min. E4 Final vale E57 A57 nit E5: I A 4 0 ma Vale E7 nit E: PP 0 MWh Vale ma. E47 o. Response time (ms) A4 Hysteresis (05 %) A47 O contact (AS) C contact (RS) A49 Alarm otpt Eample: crrent, alarm vale ma. at 500 A, response time 500 ms, % hysteresis, C contact E4: MAX 500 A 500 ms % RS Binary otpt A4S as synchronoscope Measred variable A4S: o. E6 Voltage difference () o. Freqency difference () o. Phase angle () o. Alarm vale otpt E7 F E8 F Start E6 E7 E8 Response time (ms) A4 Final vale E67 E77 E87 Hysteresis (05 %) A47 nit nit O contact (AS) C contact (RS) A49 A9 Response time ( ms) Eample: synchronization of two mains: voltage V, freqency...+ Hz, phase angle , response time 500 ms, % hysteresis, O contact operation A4S: 0 +0 V F + Hz A ms % AS A59 Page 6 of 9

7 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Energy conter display Z0 Measred variable Z0: E9 Conter E9 Conter E9 Conter E94 Conter 4 Digit behind dec. point ) Energy direction ) R0 R0 R0 R04 nit Eample : conter display for conter, total active power, digits behind decimal point, energy direction consmption, nit kwh Z0: E9 PP.... consmption kwh Eample : conter display for conter, total reactive power, digit behind decimal point, energy direction indctive, nit kvarh Z0: E9 QP..., ind. kvarh ) allowed settings: ) allowed settings: 0 digits behind decimal point, ma. indication digit behind decimal point, ma. indication digits behind decimal point, ma. indication active power consmption generation reactive power indctive capacity Connection diagrams for srface monting case or analog otpts S Transdcer S A B GD V + : P : : I : Q VT CT MW V A 5 MVar Ma ma ma V. O. E P 8450 F VA V 0005A I ma 4 I V ,5 MADE I GERMAY I 7 9 8! Connection RS 485 interface (optionally) Analog otpt Analog otpt Analog otpt Binary otpt S Inpt crrent Inpt voltage Power spply Terminal RXDTXD A+ RXDTXD B DGD GD Interface connection, 46, analog otpts A B GD S Transdcer S E P V + 5 VA 4 I ma F I V ,5 MADE I GERMAY I 7 9 8! Connection RS 485 interface (optionally) Analog otpt Analog otpt Analog otpt Analog otpt 4 Binary otpt S Inpt crrent Inpt voltage Power spply Terminal RXDTXD A+ RXDTXD B DGD GD Interface connection, 46, Page 7 of 9

8 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA0 8.54E Connection diagram for srface monting case mains synchronization S Transdcer S A B GD V E P 8450 F VA 4 I ma 570 V Connection 5.6 0,5 MADE I GERMAY 8! RS 485 interface (optionally) Analog otpt Analog otpt Analog otpt Binary otpt S Inpt crrent Inpt voltage Power spply Terminal RXDTXD A+ RXDTXD B DGD GD Interface connection 5 4 Dimensional drawings for srface monting case (dimensions in mm) A B GD S Transdcer S : : : : VT CT E P I I I 0, V + 5 VA 4 ma 570 V 5! Page 8 of 9

9 PT S Configrable niversal transdcer for all power crrent variables and for mains synchronization EA08.54 E Connection diagrams for srface monting case Singlephase alternating crrent wire threephase balanced load with simlated phase 5 5 k l ~ v k l ~ k l ~E v k l ~E () V V wire threephase balanced load v w v v V V X X X k l ~E V W wire threephase nbalanced load v w v v V V X X X k l k l ~E V W 4wire threephase balanced load k ~E l v V k ~E l 4wire threephase nbalanced load v w X X X V W k l k l ~E Synchronization of two mains 5 5 () Mains Mains () () Mains Mains () Page 9 of 9

10 ElectronX Haberstrasse 46 D455 Velbert DETSCHAD Tel: Fa: The Company's policy is one of continos prodct improvement and the right is reserved to modify the information contained herein withot notice. Printed in the Fed. Rep. of Germany (0.00) ElectronX 00 ElectronX has Sales & Cstomer Spport