INFORMATION TECHNOLOGY SYSTEMS SPDs FOR 19 TECHNOLOGY. NET Protector Surge Arrester. Protects switches, HUBs and telecommunication

Transcription

1 Surge Arrester Protects switches, HUBs and telecommunication systems Class D according to EN 0 possible (Gigabit Ethernet) Variably equippable patch panels Units available with plug-in inputs and outputs for retrofitting 9 enclosure, equippable with surge protective boards for protection of network components (class D) or telecommunication systems. 9 enclosure, equippable with up to surge protective boards for protection of active network components like HUBs, switches (class D) or telecommunication systems. Typical applications: Ethernet, Token Ring, E and ISDN. requires space of only vertical module and is mostly installed into terminal boards. It is inserted as a patch panel with surge protection or as a retrofitted device for patching between the patch panel and the device to be protected. b 9 a c c Installation drawing The structure of NET PRO is modular. The empty enclosure can be furnished optionally with, or surge protective boards. GHTM Certificate The completely shielded 9 enclosure and the TP board allow the construction of networks, class D. This has been confirmed by the independent test institute GHMT. 99

2 NET-Protector Surge Arrester NET PRO... LSA min. mm protected NET PRO... LSA NET PRO min. mm patch panel protected The protective boards do not only provide a different protective circuit, but also a different connection. While the protected output is always an RJ unit, the input can be an IDC termination or RJ unit. The IDC termination unit is often used for the first equipment of a new installation which does not include any patch panel yet. The RJ unit is described as retrofitting unit for existing systems, as it is patched easily between the patch panel and the active component. 9" distribution board NET PRO protected min. mm 9" distribution board min protected cable. mm LSA unit as patch field (left) / Unit for retrofitting (right) 00

3 9 0 NET PRO TP 9 0 NET PRO SA TP 9 0 NET PRO TP 0 NET PRO TP NET PRO TP TP 99 0 NET PRO LSA TP /LSA-PLUS/TP 99 0 NET PRO TP 0 TP drawing NET PRO TP Fine protection for all pairs thanks to low capacitance diode matrix for each pair. Fine protection board with shielded ports for universal cablings (class D). For universal use as protection for all pairs ( TP) is provided. To be installed into EG NET PRO 9 and mounted into the distribution cabinet as a patch field or retrofitting unit GHMT certificate for class D channel link Low protection level for all lines boundaries and higher NET PRO TP NET PRO LSA TP NET PRO TP 0 Nominal voltage U N V V V Max. continuous dc voltage U c V V 0 V Max. continuous ac voltage U c. V. V. V Nominal current I L 00 ma 00 ma 00 ma C Nominal discharge current (/0) per port I n. ka. ka 0. ka C Nominal discharge current (/0) per line I n 0. ka 0. ka 0. ka Voltage protection level line-line at I n C U p V V 0 V Voltage protection level line-pg at I n C U p V V 0 V Voltage protection level line-line at kv/µs C U p V V 0 V Voltage protection level line-pg at kv/µs C U p V V 0 V Bandwidth line-line at 00 Ohm f G MHz 0 MHz 00 MHz Insertion loss at 00 MHz < 0. db < 0. db < 0. db Capacity line-line C pf pf pf Capacity line-pg C 0 pf 0 pf 0 pf Response time line-line t a ns ns ns Response time line-pg t a ns ns ns Operating temperature range -0 C...+0 C -0 C...+0 C -0 C...+0 C Degree of protection IP 00 IP 00 IP 00 Mounting in enclosure enclosure enclosure Connection input/output RJ shielded / RJ shielded LSA-PLUS / RJ shielded RJ shielded / RJ shielded Pinning /, /, /, / /, /, /, / /, /, /, / Earthing via enclosure enclosure enclosure W x L x mm x 0 mm x mm Test standards VDE 0-, IEC - VDE 0-, IEC - VDE 0-, IEC - Approvals, Certifications Class D Type NET PRO TP NET PRO LSA TP NET PRO TP 0 Part No Packing unit pc(s) pc(s) pc(s) Accessory Part for Enclosure 9 Completely shielded empty enclosure for equipping up to NET 99 0 EG NET PRO 9 EG NET PRO Type EG NET PRO 9 vertical module EG NET PRO

4 NET PRO ISDN 99 0 NET PRO ISDN 99 0 NET PRO ISDN LSA NET PRO ISDN NET- Protector ISDN, V 99 0 NET PRO ISDN LSA NET- Protector ISDN LSA, V 99 0 Patch panel or retrofitting unit Protection integrated for the remote power supply boundaries 0 B and higher Energy-coordinated ISDN -wire protective circuit with additional protection of the remote power supply. drawing NET PRO ISDN Surge protective board with unshielded ports for ISDN S 0 systems. Installation into EG NET PRO 9 and mounting in distribution boards upstream of the telecommunication system. Retrofitting or patch panel unit (LSA) NET PRO ISDN NET PRO ISDN LSA Nominal voltage U N V V Nominal voltage pa-pa U N 0 V 0 V Max. continuous dc voltage U c. V. V Max. continuous ac voltage U c. V. V Max. continuous dc voltage pa-pa U c 0 V 0 V Nominal current I L 00 ma 00 ma C Nominal discharge current (/0) per port I n 0 ka 0 ka C Nominal discharge current (/0) per line I n. ka ka Voltage protection level line-line at I n C U p 0 V V Voltage protection level line-pg at I n C U p 00 V 00 V Voltage protection level pa-pa at I n C U p 0 V 0 V Voltage protection level line-line at kv/µs C U p V V Voltage protection level line-pg at kv/µs C U p 00 V 00 V Voltage protection level pa-pa at kv/µs C U p 00 V 00 V Coordination characteristics KK X/ X/ Series impedance per line Ohm Ohm Bandwidth line-line f G MHz MHz Capacity line-line C nf nf Capacity line-pg C 0 pf pf Capacity pa-pa C 0. nf 0.0 nf Response time line-line t a ns ns Response time line-pg t a 00 ns 00 ns Response time pa-pa t A ns ns Operating temperature range -0 C...+0 C -0 C...+0 C Degree of protection IP 00 IP 00 Mounting in enclosure enclosure Connection input/output RJ / RJ LSA-PLUS / RJ Pinning /, / /, / Earthing via enclosure enclosure W x L x mm x 0 mm Test standards VDE 0-, IEC - VDE 0-, IEC - Type NET PRO ISDN NET PRO ISDN LSA Part No Packing unit pc(s) pc(s) PRO 9 Enclosure 9 Completely shielded empty enclosure for equipping up to NET EG NET PRO EG NET Type EG NET PRO 9 vertical module EG NET PRO

5 9 09 NET PRO C 9 00 NET PRO C LSA 9 0 NET PRO C 9 0 NET PRO C LSA NET PRO TC NET PRO TC TC, 0 V NET PRO TC LSA TC LSA, 0 V NET PRO TC TC, 0 V 99 0 NET PRO TC LSA TC LSA,+B 0 V 99 0 ϑ ϑ drawing NET PRO TC PTC thermistors decouple the protective stages and thus protect the terminal systems additionally at power crossings. Please consider the reservation depending on the type. Protective board with unshielded ports against surges and ac current influences on telecommunication systems with analogue or system transmission technology. For installation into EG NET PRO 9 as retrofitting or patch panel unit (LSA) Patch panel or retrofitting unit Protection integrated against power crossing boundaries 0 B and higher NET PRO TC NET PRO TC LSA NET PRO TC NET PRO TC LSA Nominal voltage U N 0 V 0 V 0 V 0 V Max. continuous dc voltage U c 0 V 0 V 0 V 0 V Max. continuous ac voltage U c 0 V 0 V 0 V 0 V Nominal current I L 0 ma 0 ma 0 ma 0 ma C Nominal discharge current (/0) per port I n ka 0 ka 0 ka 0 ka C Nominal discharge current (/0) per line I n. ka ka. ka ka Voltage protection level line-line at I n C U p 0 V V 0 V V Voltage protection level line-pg at I n C U p 00 V 00 V 00 V 00 V Voltage protection level line-line at kv/µs C U p 0 V 0 V 0 V 0 V Voltage protection level line-pg at kv/µs C U p 00 V 00 V 00 V 00 V Coordination characteristics KK X/ X/ X/ X/ Series impedance per line 0 Ohm 0 Ohm 0 Ohm 0 Ohm Bandwidth line-line f G 0 MHz 0 MHz 0 MHz 0 MHz Capacity line-line C 00 pf 00 pf 00 pf 00 pf Capacity line-pg C pf pf pf pf Response time line-line t a ns ns ns ns Response time line-pg t a 00 ns 00 ns 00 ns 00 ns Operating temperature range -0 C...+0 C -0 C...+0 C -0 C...+0 C -0 C...+0 C Degree of protection IP 00 IP 00 IP 00 IP 00 Mounting in enclosure enclosure enclosure enclosure Connection input/output RJ / RJ LSA-PLUS / RJ RJ / RJ LSA-PLUS / RJ Pinning / / /, / /, / Earthing via enclosure enclosure enclosure enclosure W x L x mm x 0 mm x mm x 0 mm Test standards VDE 0-, IEC - VDE 0-, IEC - VDE 0-, IEC - VDE 0-, IEC - Type NET PRO TC NET PRO TC LSA NET PRO TC NET PRO TC LSA Part No Packing unit pc(s) pc(s) pc(s) pc(s) Accessory Part for Enclosure 9 Completely shielded empty enclosure for equipping up to NET 99 0 EG NET PRO 9 EG NET PRO Type EG NET PRO 9 vertical module EG NET PRO

6 NET PRO E LSA 99 0 NET PRO E LSA / / / / NET PRO E LSA NET- Protector E LSA 99 0 Patch panel unit Suitable for different RJ reservations boundaries 0 B and higher Energy-coordinated TC protective circuit for plug-in reservations at the protected port. drawing NET PRO E LSA Surge protective board, patch panel unit, with unshielded ports for E interfaces. Installations into EG NET PRO 9 and mounting in distribution boards upstream of the telecommunication system. Variable connection by reservation of several socket pins NET PRO E LSA Nominal voltage U N V Max. continuous dc voltage U c. V Max. continuous ac voltage U c 0. V Nominal current I L 00 ma C Nominal discharge current (/0) per port I n 0 ka C Nominal discharge current (/0) per line I n ka Voltage protection level line-line at I n C U p V Voltage protection level line-pg at I n C U p 00 V Voltage protection level line-line at kv/µs C U p 9 V Voltage protection level line-pg at kv/µs C U p 00 V Coordination characteristics KK X/ Series impedance per line Ohm Bandwidth line-line f G.9 MHz Capacity line-line C nf Capacity line-pg C pf Response time line-line t a ns Response time line-pg t a 00 ns Operating temperature range -0 C...+0 C Degree of protection IP 00 Mounting in enclosure Connection input/output LSA-PLUS / RJ Pinning / (/), / (/) Earthing via enclosure W x L x 0 mm Test standards IEC - Type NET PRO E LSA Part No Packing unit pc(s) Accessory Part for PRO 9 Enclosure 9 Completely shielded empty enclosure for equipping up to NET EG NET PRO EG NET Type EG NET PRO 9 vertical module EG NET PRO