Evaluation Board for 8-/10-/12-Bit, Parallel Input, Dual-Channel, Current Output DAC EVAL-AD5428/AD5440/AD5447EB
|
|
- Mitchell Tyler Allison
- 5 years ago
- Views:
Transcription
1 Evaluation Board for 8-/0-/-Bit, Parallel Input, Dual-Channel, Current Output DAC EVAL-AD58/AD50/AD5EB FEATURES Operates from dual ± V and 5 V supplies On-board reference and output amplifiers Direct hookup to printer port of PC PC software for control of DAC DESCRIPTION This data sheet describes the evaluation board hardware and software for the AD58/AD50/AD5 DACs briefly highlighted below. The AD58/AD50/AD5 devices are CMOS 8-, 0-, and -bit, current output, digital-to-analog converters (DACs). They operate from a.5 V to 5.5 V power supply, making them suited to battery-powered and other applications such as analog processing, waveform generators, and programmable attenuators. On power-up, the internal register and latches are filled with 0s and the DAC outputs are at zero scale. As a result of manufacture on a CMOS submicron process, the parts offer excellent -quadrant multiplication characteristics, with large-signal multiplying bandwidths of up to 0 MHz. The applied voltage reference determines the full-scale output current. An integrated feedback resistor (RFB) provides temperature tracking and full-scale voltage output when combined with an external I-to-V precision amplifier. Full data on the DACs is available in the AD58/AD50/AD5 data sheet, which should be consulted in conjunction with this data sheet when using the evaluation board. FUNCTIONAL BLOCK DIAGRAM V REF A V REF B ADR0 REFERENCE -WAY CENTRONICS CONNECTOR DATA BUFFER DAC A AD58/AD50/ AD5 8-/0-/-BIT DAC DAC B AD805 I TO V AD805 I TO V V OUT A V OUT B CS R/W VCC DGND VDD VDD AGND VSS Figure. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 90, Norwood, MA 00-90, U.S.A. Tel: Fax: Analog Devices, Inc. All rights reserved.
2 EVAL-AD58/AD50/AD5EB TABLE OF CONTENTS Hardware... Evaluation Board Power Supplies... Test Point Setup... Software... Setup... Running and Using the Software... Evaluation Board Schematic...5 Evaluation Board PCB Layers... Ordering Information... Bill of Materials... Ordering Guide...8 ESD Caution...8 REVISION HISTORY /05 Revision 0: Initial Version Rev. 0 Page of 8
3 EVAL-AD58/AD50/AD5EB HARDWARE The evaluation board consists of the AD58, AD50 or AD5 DAC, two AD805 op amps, and a 0 V reference, the ADR0. An external reference can also be applied via an SMB input connector. Digital buffering is supplied on board. Though excellent for dc performance, the bandwidth performance of the combined DAC and amplifier is limited to approximately 8 MHz. EVALUATION BOARD POWER SUPPLIES The evaluation board requires ± V and 5 V supplies. The V (VDD) and V (VSS) are used to power the output amplifier. The 5 V is used to power the DAC (VDD) and the transceivers (VCC). All supplies are decoupled to ground with 0 µf tantalum and 0. µf ceramic capacitors. TEST POINT SETUP The test point pins are connected on the evaluation board to the respective DAC, as shown in Table. For example, the least significant bit (LSB) of the AD50, DB0, is connected to the DB test point. Table. Test Point Setup Test Point DB DB0 DB9 DB8 DB DB DB5 DB DB DB DB DB0 AD5 DB DB0 DB9 DB8 DB DB DB5 DB DB DB DB DB0 AD50 DB9 DB8 DB DB DB5 DB DB DB DB DB0 NC NC AD58 DB DB DB5 DB NC NC NC NC DB DB DB DB0 Rev. 0 Page of 8
4 EVAL-AD58/AD50/AD5EB SOFTWARE The evaluation kit includes a CD-ROM with self-installing software to control the DAC. The software allows you to choose which device type you have and to load each DAC, in the dualchannel setup, with a digital word. SETUP The evaluation kit includes self-installing software on a CD-ROM. The software is compatible with Windows 95/9/000/NT/XP. If the setup file does not automatically run when you insert the CD, you can run the setup.exe file from the CD-ROM. INSTALLING AND USING THE SOFTWARE To operate the evaluation software:. Ensure that the centronics cable connects the PC to the evaluation board.. From the Analog Devices menu, click Start > All Programs > Analog Devices > AD58_0_ > AD58_0_ Evaluation Software. For older PCs, click Start > Programs > Analog Devices > AD58_0_->AD58_0_ Evaluation Software The AD58/0/ dialog box opens, as shown in Figure. Figure. Dialog Box. To select the resolution of the part on the evaluation board, click the appropriate button under Select Device.. Click either DAC A or DAC B. DAC A and DAC B are both configured to give an output voltage range of 0 V to 0 V. 5. In the Enter DAC Word [Hex] field, type a data-word to the DAC. You must enter the 8-/0-/-bit word in hexadecimal.. Press Enter on the keyboard to load the DAC and update the selected output From the drop-down Printer Port menu, select the printer port address from the list of available addresses. 8. Click File > Exit. Rev. 0 Page of 8
5 EVAL-AD58/AD50/AD5EB EVALUATION BOARD SCHEMATIC C DGND U-A 8 C C C C5 C C9 C C C8 C0 C5 U AD5 AGND R FB B I OUT B R FB A I OUT A V REF A V REF B C TP TP J EXT REF A LK V IN V OUT C C 5 TRIM U GND A B C8 J5 EXT REF B C.8pF C.8pF V SS U V SS U V V V V C C C5 C C9 C0 C C TP TP J J O/P B O/P A DB0 8 DB DB DB 5 DB DB5 DB DB DB8 0 DB9 9 DB0 8 DB CS 9 RW 0 DB0 DB DB DB DB DB5 DB DB DB8 DB9 DB0 DB 5 DGND DGND DAC_A/B CS R/W J AGND V SS V CC J V CC LEBA OEBA A0 A A A A A5 A A CEAB GND VCC CEBA B B B5 B B B B B0 LEAB OEAB 5 U 9 0 ABT5 V CC LEBA OEBA A0 A A A A A5 A A CEAB GND VCC U5 CEBA B B B5 B B B B B0 LEAB OEAB ABT5 P P P P P P DGND 5 P P P 5 P P P A0 A Y0 Y Y E Y V CC 9 U-B Y0 A0 Y A Y 5 E Y P P P P 9 P 0 P P P P P 5 P P P 8 P 9 P 0 P 8 P 9 P Figure. Evaluation Board Schematic Rev. 0 Page 5 of 8
6 EVAL-AD58/AD50/AD5EB EVALUATION BOARD PCB LAYERS Figure. Component Placement Diagram Figure 5. Component-Side PCB Layer Figure. Solder-Side PCB Layer Rev. 0 Page of 8
7 ORDERING INFORMATION BILL OF MATERIALS Table. Name Part Description Value Tolerance (%) Stock Code EVAL-AD58/AD50/AD5EB C XR ceramic capacitor 0. µf 0 FEC 99-5 C XR ceramic capacitor 0. µf 0 FEC 99-5 C Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C XR ceramic capacitor 0. µf 0 FEC 99-5 C5 Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9-0 C XR ceramic capacitor 0. µf 0 FEC 99-5 C NPO ceramic capacitor.8 pf 0 FEC -8 C8 XR ceramic capacitor 0. µf 0 FEC 99-5 C9 Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C0 XR ceramic capacitor 0. µf 0 FEC 99-5 C Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C XR ceramic capacitor 0. µf 0 FEC 99-5 C XR ceramic capacitor 0. µf 0 FEC 99-5 C Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C5 XR ceramic capacitor 0. µf 0 FEC 99-5 C Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C XR ceramic capacitor 0. µf 0 FEC 99-5 C8 Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C9 XR Ceramic Capacitor 0. µf 0 FEC 99-5 C0 Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C XR ceramic capacitor 0. µf 0 FEC 99-5 C NPO ceramic capacitor.8 pf 0 FEC -8 C Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C XR ceramic capacitor 0. µf 0 FEC 99-5 C5 Tantalum capacitor Taj Series 0 µf, 0 V 0 FEC 9- C XR ceramic capacitor 0. µf 0 FEC 99-5 CS, DB0 to DB Red Test Point FEC 0-5 (pack) J to J SMB socket FEC 0-8 J SMB socket FEC 0-8 J SMB socket FEC 0-8 J SMB socket FEC 0-8 J5 SMB socket FEC 0-8 J SMB socket FEC 0-8 LK -pin header ( x ) FEC 5-9&58-5 P -pin centronics connector FEC -5 P -pin terminal block FEC 5-9 RW Red test point FEC 0-5 (pack) TP to TP Red test point FEC 0-5 (pack) U AD58/AD50/AD5 AD58YRU/AD50YRU/AD5YRU U ADR0 ADR0AR U AD805 AD805AR U, U5 ABT5 Fairchild ABT5CMTC U 9 CDHCT9M U AD805 AD805AR Each Corner Rubber stick-on feet FEC 8-9 Rev. 0 Page of 8
8 EVAL-AD58/AD50/AD5EB ORDERING GUIDE Model EVAL-AD58EB EVAL-AD50EB EVAL-AD5EB Description Evaluation Board Evaluation Board Evaluation Board ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. 005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. EB05 0 /05(0) Rev. 0 Page 8 of 8
Low Voltage 2-1 Mux, Level Translator ADG3232
Low Voltage 2-1 Mux, Level Translator ADG3232 FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 8-Lead SOT-23 Package Short Circuit Protection
More information1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604
a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On
More informationonlinecomponents.com
a FEATURES +.8 V to +. ingle Supply 2. V ual Supply 2. ON Resistance. ON Resistance Flatness pa Leakage Currents 4 ns Switching Times Single 6-to- Multiplexer AG76 ifferential 8-to- Multiplexer AG77 28-Lead
More informationCMOS, +1.8 V to +5.5 V/ 2.5 V, 2.5 Low-Voltage, 8-/16-Channel Multiplexers ADG706/ADG707 REV. A
a FEATURES +.8 V to +. ingle Supply. V ual Supply. ON Resistance. ON Resistance Flatness pa Leakage Currents ns Switching Times Single -to- Multiplexer AG ifferential 8-to- Multiplexer AG 8-Lead TSSOP
More informationLC 2 MOS Precision Analog Switch in MSOP ADG419-EP
LC 2 MOS Precision Analog Switch in MSOP AG49-EP FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance:
More informationLow Voltage 400 MHz Quad 2:1 Mux with 3 ns Switching Time ADG774A
a FEATURE Bandwidth >4 MHz Low Insertion Loss and On Resistance: 2.2 Typical On-Resistance Flatness.3 Typical ingle 3 V/5 upply Operation Very Low istortion:
More information1 pc Charge Injection, 100 pa Leakage, CMOS 5 V/+5 V/+3 V Quad SPST Switches ADG611/ADG612/ADG613
a FEATURE 1 pc Charge Injection 2.7 V to 5.5 V ual upply +2.7 V to +5.5 V ingle upply Automotive Temperature Range 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 On-Resistance Rail-to-Rail witching
More informationLow Drift, Low Power Instrumentation Amplifier AD621
a FEATURES EASY TO USE Pin-Strappable Gains of 0 and 00 All Errors Specified for Total System Performance Higher Performance than Discrete In Amp Designs Available in -Lead DIP and SOIC Low Power,.3 ma
More informationCMOS ±5 V/+5 V/+3 V Triple SPDT Switch ADG633
CMOS ±5 V/+5 V/+3 V Triple SPT Switch AG633 FEATURES ±2 V to ±6 V ual Supply 2 V to 12 ingle Supply Automotive Temperature Range 4 o C to +125 o C
More informationSHM-14 Ultra-Fast, 14-Bit Linear Monolithic Sample-Hold Amplifiers
INNOVATION and EX C ELL E N C E Ultra-Fast, 1-Bit Linear Monolithic Sample-Hold Amplifiers FEATURES Fast acquisition time: 10ns to ±0.1% 0ns to ±0.0% ns to ±0.01% ±0.001% Nonlinearity 6µV rms output noise
More informationSERIALLY PROGRAMMABLE CLOCK SOURCE. Features
DATASHEET ICS307-03 Description The ICS307-03 is a dynamic, serially programmable clock source which is flexible and takes up minimal board space. Output frequencies are programmed via a 3-wire SPI port.
More informationAG726/AG732 SPECIFICATIONS ( = V %, = V, GN = V, unless otherwise noted.) B Version 4 C Parameter +2 C to +8 C Unit Test Conditions/Comments ANALOG SW
a FEATURES.8 V to. ingle Supply 2. V ual-supply Operation 4 On Resistance. On Resistance Flatness 48-Lead TQFP or 48-Lead 7 mm 7 mm CSP Packages Rail-to-Rail Operation 3 ns Switching Times Single 32-to-
More informationLC2 MOS 4-/8-Channel High Performance Analog Multiplexers ADG408/ADG409
a FEATURES 44 upply Maximum Ratings to Analog Signal Range Low On Resistance ( max) Low Power (I SUPPLY < 75 A) Fast Switching Break-Before-Make Switching Action Plug-in Replacement for G408/G409 APPLICATIONS
More informationISSP User Guide CY3207ISSP. Revision C
CY3207ISSP ISSP User Guide Revision C Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com Copyrights Copyrights
More informationREF0 TABLE OF CONTENTS Features... General Description... Pin Configurations... Revision History... Specifications... Electrical Specifications... Abs
FEATURES V output: ±0.% maximum Temperature voltage output:.9 mv/ C Adjustment range: ±% minimum Excellent temperature stability: 8. ppm/ C maximum Low noise: µv p-p maximum Low supply current:. ma maximum
More informationST3L01 TRIPLE VOLTAGE REGULATOR
TRIPLE VOLTAGE REGULATOR DUAL INPUT VOLTAGE (12V AND 5V) TRIPLE OUTPUT VOLTAGE (2.6V, 3.3V, 8V) 2.6V GUARANTEED I OUT UP TO 1.2A 3.3V GUARANTEED I OUT UP TO 1.0A 8V GUARANTEED I OUT UP TO 200mA THERMAL
More informationIn-System Serial Programming (ISSP) Guide
CY3207-ISSP In-System Serial Programming (ISSP) Guide Doc. # 001-15301 Rev. *E Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com
More informationIn-System Serial Programming (ISSP) Guide
CY3207ISSP In-System Serial Programming (ISSP) Guide Doc. # 001-15301 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com
More informationIn-System Serial Programming (ISSP) Guide
CY3207ISSP In-System Serial Programming (ISSP) Guide Spec. # 001-15301 Rev. ** Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com
More informationCMOS Low Cost 10-Bit Multiplying DAC AD7533
CMOS Low Cost 0-Bit Multiplying DAC FEATUES Low cost 0-bit DAC Low cost AD750 replacement Linearity: ½,, or Low power dissipation Full four-quadrant multiplying DAC CMOS/TTL direct interface Latch free
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM117/217 LM317 1.2V TO 37V VOLTAGE REGULATOR OUTPUT VOLTAGE RANGE: 1.2
More informationMaxim Integrated Products 1
9-879; Rev 0; /00 MAX70 Evaluation Kit General Description The MAX70 evaluation kit (EV kit) combines Maxim s multiprotocol clock/data transceiver (MAX70), control transceiver (MAX7), and cable terminator
More informationCA3086. General Purpose NPN Transistor Array. Applications. Pinout. Ordering Information. Data Sheet August 2003 FN483.5
Data Sheet August FN8. General Purpose NPN Transistor Array The consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
More informationDG211. Features. SPST 4-Channel Analog Switch. Part Number Information. Functional Block Diagrams. Pinout. Data Sheet December 21, 2005 FN3118.
Data Sheet FN3118.4 SPST 4-Channel Analog Switch The is a low cost, CMOS monolithic, Quad SPST analog switch. It can be used in general purpose switching applications for communications, instrumentation,
More informationHigh-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035
19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision General Description The is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options
More informationEvaluates: MAX17681 for Isolated +15V or +12V Output Configuration. MAX17681 Evaluation Kit. General Description. Quick Start.
MAX78 Evaluation Kit Evaluates: MAX78 for Isolated +V or +V Output Configuration General Description The MAX78EVKITC is a fully assembled and tested circuit board that demonstrates the performance of the
More information3.3 V 256 K 16 CMOS SRAM
August 2004 AS7C34098A 3.3 V 256 K 16 CMOS SRAM Features Pin compatible with AS7C34098 Industrial and commercial temperature Organization: 262,144 words 16 bits Center power and ground pins High speed
More informationSY10/100EL11V. General Description. Precision Edge. Features. Pin Names. 5V/3.3V 1:2 Differential Fanout Buffer. Revision 10.0
SY10/100EL11 5/3.3 1:2 Differential Fanout Buffer Revision 10.0 General Description The SY10/100EL11 are 1:2 differential fanout gates. These devices are functionally similar to the E111A/L devices, with
More informationSGM48753 CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog IC configured as three single-pole/double-throw (SPDT) switches. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail
More information7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED. October 2002
THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD LINE REGULATION: MAX 0.2% OVER FULL TEMPERATURE RANGE LOAD REGULATION:
More information5-6GHz 6-bit Phase-Shifter. GaAs Monolithic Microwave IC in SMD leadless package
RoHS COMPLIANT GaAs Monolithic Microwave IC in SMD leadless package Description The is a 6-bit digital phase shifter MMIC with a 0-360 range. It is designed for 5 to 6GHz frequency range applications.
More informationKD A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED
7.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5V,1.8V, 2.5V, 3.0, 3.3V OUTPUT CURRENT UP TO 7.5A 1.4V MAX DROPOUT VOLTAGE AT FULL LOAD
More informationTOP VIEW. Maxim Integrated Products 1
9-2266; Rev 2; 6/3 3ppm/ C, Low-Power, Low-Dropout General Description The high-precision, low-power, low-dropout voltage reference features a low 3ppm/ C (max) temperature coefficient and a low dropout
More informationHigh Performance Driver/Comparator, Active Load on a Single Chip AD53509
High Performance Driver/Comparator, Active Load on a Single Chip AD53509 FEATURES 250 MHz operation Driver/comparator and active load included On-chip Schottky diode bridge 52-lead LQFP_EP package APPLICATIONS
More informationRegulated 3.3V Charge Pump MAX679
19-1217; Rev ; 4/97 Regulated 3.3 Charge Pump General Description The step-up, regulated charge pump generates a 3.3 ±4% output voltage from a 1.8 to 3.6 input voltage (two alkaline, NiCd, or NiMH; or
More informationSC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
More informationLow Capacitance, Low Charge Injection, ±15 V/+12 V icmos Quad SPST Switches ADG1212-EP
Enhanced Product Low Capacitance, Low Charge Injection, ±15 V/+12 V icmo Quad PT witches FEATURE 1 pf off capacitance 2.6 pf on capacitance
More informationPTC04-DB-HALL02. Daughter Board for Melexis PTC devices. Features and Benefits. Applications. Ordering Information. Accessories. 1. Functional Diagram
PTC0-DB-HALL0 Features and Benefits PTC0 interface board for testing devices: 0 0 0 Applications Experimental tool for Lab and Prototyping Production Equipment for Serial Programming Ordering Information
More informationLD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LOW DROPOUT VOLTAGE (1.15V TYP. @ I OUT = 1A, 25 C) VERY LOW QUIESCENT CURRENT (5 ma TYP. @ 25 C) OUTPUT CURRENT UP TO 1A FIXED
More informationRT9184A. Dual, Ultra-Fast Transient Response, 500mA LDO Regulator. General Description. Features. Pin Configuration. Applications
RT9184A Dual, Ultra-Fast Transient Response, 500mA LDO Regulator General Description The RT9184A series are an efficient, precise dual-channel CMOS LDO regulator optimized for ultra-low-quiescent applications.
More information*1. Attention should be paid to the power dissipation of the package when the output current is large.
S-1313 Series www.ablic.com www.ablicinc.com SUPER LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 211-216 Rev.2.1_1 The S-1313 Series, developed by using the CMOS technology, is
More informationIH5341, IH5352. Dual SPST, Quad SPST CMOS RF/Video Switches. Description. Features. Ordering Information. Applications. Pinouts.
SEMICONDUCTOR IH, IH2 December Features Description Dual SPST, Quad SPST CMOS RF/Video Switches R DS(ON) < Ω Switch Attenuation Varies Less Than db From DC to 00MHz "OFF" Isolation > 0dB Typical at 0MHz
More information74VHCT138ATTR 3 TO 8 LINE DECODER (INVERTING)
3 TO 8 LINE DECODER (INVERTING) HIGH SPEED: t PD = 7.6 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER
More informationP4C164 ULTRA HIGH SPEED 8K X 8 STATIC CMOS RAMS FEATURES DESCRIPTION. Full CMOS, 6T Cell. Common Data I/O
FEATURES Full CMOS, 6T Cell High Speed (Equal Access and Cycle Times) 8/10/12/15/20/25/35/70/100 ns (Commercial) 10/12/15/20/25/35/70/100 ns(industrial) 12/15/20/25/35/45/70/100 ns (Military) Low Power
More informationM74HC20TTR DUAL 4-INPUT NAND GATE
DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 9ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More informationLT R1. Quad Matched Resistor Network. Applications. Typical Application
Quad Matched Resistor Network Features n Excellent Matching A-Grade: 0.0% Matching B-Grade: 0.0% Matching n 0.ppm/ C Matching Temperature Drift n ±V Operating Voltage (±0V Abs Max) n ppm/ C Absolute Resistor
More informationPRODUCT OVERVIEW REF. IN 16 BIPOLAR OFFSET 17 REGISTER 74LS75 REGISTER 74LS75 BITS LSB
FEATURES -Bit resolution Integral nonlinearity error ±/LSB, max. Differential nonlinearity error ±/LSB, max. MIL-STD- high-reliability versions available Input register μs fast output settling time Guaranteed
More information2-bit LVTTL to GTL transceiver
Rev. 01 9 ugust 2007 Product data sheet 1. General description 2. Features 3. Quick reference data The is a 2-bit translating transceiver designed for 3.3 V system interface with a GTL /GTL/GTL+ bus. The
More informationFeatures. Y Wide supply voltage range 3 0V to 15V. Y Guaranteed noise margin 1 0V. Y High noise immunity 0 45 VCC (typ )
MM70C95 MM80C95 MM70C97 MM80C97 TRI-STATE Hex Buffers MM70C96 MM80C96 MM70C98 MM80C98 TRI-STATE Hex Inverters General Description These gates are monolithic complementary MOS (CMOS) integrated circuits
More informationDATASHEET HS-2420RH. Features. Applications. Functional Diagram. Radiation Hardened Fast Sample and Hold
Radiation Hardened Fast Sample and Hold OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 888INTERSIL or www.intersil.com/tsc DATASHEET FN3554 Rev 4.00 The HS40RH is a
More informationPrecision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers
/ Precision, 6-Channel/Dual 8-Channel, General Description The / low-voltage, CMOS analog multiplexers (muxes) offer low on-resistance (Ω max), which is matched to within 6Ω between switches and remains
More information5.0 V 256 K 16 CMOS SRAM
February 2006 5.0 V 256 K 16 CMOS SRAM Features Pin compatible with AS7C4098 Industrial and commercial temperature Organization: 262,144 words 16 bits Center power and ground pins High speed - 10/12/15/20
More informationRT9403. I 2 C Programmable High Precision Reference Voltage Generator. Features. General Description. Ordering Information.
I 2 C Programmable High Precision Reference Voltage Generator General Description The RT9403 is a high precision reference voltage generating console consisting of three I 2 C programmable DACs. Each DAC
More informationAN-1080 APPLICATION NOTE
APPLICATION NOTE One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Power-Up and Power-Down Sequencing Using the ADM108x Simple Sequencer
More informationRT9166B. 600mA, Ultra-Fast Transient Response Linear Regulator. General Description. Features. Ordering Information. Applications. Pin Configurations
Ordering Information Output Voltage 12 : 1.2V Note : Richtek products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering
More informationObsolete Product(s) - Obsolete Product(s)
8-INPUT NAND GATE HIGH SPEED: t PD = 13ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: I
More informationFour-Channel Thermistor Temperature-to-Pulse- Width Converter
19-234; Rev ; 1/2 General Description The four-channel thermistor temperature-topulse-width converter measures the temperatures of up to four thermistors and converts them to a series of output pulses
More informationAN1755 APPLICATION NOTE
AN1755 APPLICATION NOTE A HIGH RESOLUTION / PRECISION THERMOMETER USING ST7 AND NE555 INTRODUCTION The goal of this application note is to present a realistic example of a thermometer using an ST7 and
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 3/6mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
More information800mA and 1A Low Dropout Positive Regulator 2.85V, 3V, 3.3V, 5V, and Adjustable
A 8mA and A Low Dropout Positive Regulator.85V, 3V, 3.3V, 5V, and Adjustable FEATURES.85V, 3V, 3.3V, 5V, and ADJUSTABLE VERSIONS.85V MODEL FOR SCSI- ACTIVE TERMINATION OUTPUT CURRENT: : 8mA max A: A max
More informationPrecision, Micropower, Low-Dropout, High- Output-Current, SO-8 Voltage References
19-165; Rev ; 7/ Precision, Micropower, Low-Dropout, High- General Description The MAX6167 are precision, low-dropout, micropower voltage references. These three-terminal devices operate with an input
More information74HC General description. 2. Features. 3-to-8 line decoder, demultiplexer with address latches; inverting
3-to-8 line decoder, demultiplexer with address latches; inverting Rev. 03 11 November 2004 Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible
More information5 V 64K X 16 CMOS SRAM
September 2006 A 5 V 64K X 16 CMOS SRAM AS7C1026C Features Industrial (-40 o to 85 o C) temperature Organization: 65,536 words 16 bits Center power and ground pins for low noise High speed - 15 ns address
More informationM74HC147TTR 10 TO 4 LINE PRIORITY ENCODER
10 TO 4 LINE PRIORITY ENCODER HIGH SPEED: t PD = 15ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More information70 mv typ. (2.8 V output product, I OUT = 100 ma)
S-1335 Series www.ablicinc.com HIGH RIPPLE-REJECTION SOFT-START FUNCTION CMOS VOLTAGE REGULATOR ABLIC Inc., 212-214 Rev.1.3_2 The S-1335 Series, developed by using the CMOS technology, is a positive voltage
More informationCHP4012a98F RoHS COMPLIANT
RoHS COMPLIANT GaAs Monolithic Microwave IC Description The CHP4012a98F is a 6-bit phase shifter monolithic circuit, which integrates a CMOS and TTL compatible interface. It is designed for a wide range
More informationLow-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
More informationQuad SPST CMOS Analog Switch
Quad PT CMO Analog witch HI-201/883 The HI-201/883 is a monolithic device comprised of four independently selectable PT switchers which feature fast switching speeds (185ns typical) combined with low power
More informationDATASHEET HI-390. Features. Ordering Information. Pinout Switch States shown for a Logic 1 Input. Applications. Functional Diagram
HI-39 Dual SPDT CMOS nalog Switch NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLCEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DTSHEET FN7 Rev 1. ugust The Hl-39
More informationLOW HIGH OFF ON. Maxim Integrated Products 1
9-79; Rev ; /07 Low-Voltage, Quad, SPST General Description The MAX0/MAX/MAX are quad, low-voltage, single-pole/single-throw (SPST) analog switches. On-resistance (00Ω, max) is matched between switches
More information256-Position SPI Compatible Dual Digital Potentiometer AD5162
Evaluation oard User Manual -Position SPI Compatible D Steps To Setup The Evaluation oard. Install D Software. Open D Rev.exe. Provide Power SupplyOr Use Power from Parallel Port +V. Configure oard and
More informationObsolete Product(s) - Obsolete Product(s)
BCD TO DECIMAL DECODER HIGH SPEED : t PD = 14ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
More informationDescription. Part numbers. AB version C version Output voltage LD2980ABM30TR LD2980ABM33TR LD2980CM33TR 3.3 V LD2980ABM50TR LD2980CM50TR 5.
Features SOT23-5L Stable with low ESR ceramic capacitors Ultra low dropout voltage (0.12 V typ. at 50 ma load, 7 mv typ. at 1 ma load) Very low quiescent current (80 µa typ. at no load in on mode; max
More information5-BIT PROGRAMMABLE VOLTAGE REFERENCE P R O D U C T I O N D ATA S H E E T
LIN DOC #: 10 T HE I N F I N I T E P O W E R OF I N N O V A TION DESCRIPTION KEY FEATURES The is a complete precision reference and voltage monitor circuit for the Intel Pentium Pro Processor and other
More informationRP mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information
RP122 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RP122 is designed for portable RF and wireless applications with demanding performance and space requirements. The RP122
More informationApril 2004 AS7C3256A
pril 2004 S7C3256 3.3V 32K X 8 CMOS SRM (Common I/O) Features Pin compatible with S7C3256 Industrial and commercial temperature options Organization: 32,768 words 8 bits High speed - 10/12/15/20 ns address
More informationM74HCT138TTR 3 TO 8 LINE DECODER (INVERTING)
3 TO 8 LINE DECODER (INVERTING) HIGH SPEED: t PD = 16ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) SYMMETRICAL
More information74HC1GU04GV. 1. General description. 2. Features. 3. Ordering information. Marking. 5. Functional diagram. Inverter
Rev. 5 1 July 27 Product data sheet 1. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. It provides an inverting single stage function. The standard output
More information±1.0% (1.0 V to 1.45 V output product : ±15 mv)
S-1135 Series www.sii-ic.com HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR Seiko Instruments Inc., 28-21 Rev.2._ S-1135 Series, developed using the CMOS technology, is
More information3.3 V 64K X 16 CMOS SRAM
September 2006 Advance Information AS7C31026C 3.3 V 64K X 16 CMOS SRAM Features Industrial (-40 o to 85 o C) temperature Organization: 65,536 words 16 bits Center power and ground pins for low noise High
More information1.0% (1.2 V to 1.45 V output product: 15 mv) 150 mv typ. (3.0 V output product, I OUT = 100 ma)
S-126 Series www.ablicinc.com ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 26-215 Rev.3.2_2 The S-126 Series is a positive voltage regulator with ultra low current consumption,
More informationIFX8117. Data Sheet. Standard Power. 1A Low-Dropout Linear Voltage Regulator IFX8117MEV IFX8117MEV33 IFX8117MEV50. Rev. 1.
1A Low-Dropout Linear Voltage Regulator IFX8117MEV IFX8117MEV33 IFX8117MEV5 Data Sheet Rev. 1.1, 21-7-2 Standard Power 1A Low-Dropout Linear Voltage Regulator IFX8117 1 Overview Features 5 V, 3.3 V and
More informationTemperature range Name Description Version XC7SET32GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.
Rev. 01 3 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input OR function. Symmetrical output impedance
More informationS-13R1 Series REVERSE CURRENT PROTECTION CMOS VOLTAGE REGULATOR. Features. Applications. Packages. ABLIC Inc., Rev.1.
www.ablicinc.com REVERSE CURRENT PROTECTION CMOS VOLTAGE REGULATOR ABLIC Inc., 212-214 Rev.1.2_2 The, developed by using the CMOS technology, is a positive voltage regulator IC of 15 ma output current,
More informationS-882Z Series ULTRA-LOW VOLTAGE OPERATION CHARGE PUMP IC FOR STEP-UP DC-DC CONVERTER STARTUP. Rev.1.2_00. Features. Applications.
ULTRA-LOW VOLTAGE OPERATION CHARGE PUMP IC FOR STEP-UP DC-DC CONVERTER STARTUP The is a charge pump IC for step-up DC-DC converter startup, which differs from conventional charge pump ICs, in that it uses
More informationLD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
LD1117A SERIES LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS LOW DROPOUT VOLTAGE (1.15V TYP. @ I OUT =1A,25 C) VERY LOW QUIESCENT CURRENT (5 ma TYP. @ 25 C) OUTPUT CURRENT UP TO 1A FIXED OUTPUT
More informationCMOS Low Cost, 10-Bit Multiplying DAC AD7533
CMOS Low Cost, 0-Bit Multiplying DAC FEATUES Low cost 0-bit DAC Low cost AD750 replacement Linearity: ½,, or Low power dissipation Full -quadrant multiplying DAC CMOS/TTL direct interface Latch free (protection
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. L7900 SERIES NEGATIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5A OUTPUT
More informationHigh Speed Quad SPST CMOS Analog Switch
High Speed Quad SPST CMOS Analog Switch HI-21HS/883 The HI-21HS/883 is a monolithic CMOS analog switch featuring very fast switching speeds and low ON resistance. This integrated circuit consists of four
More informationPRODUCTION DATA SHEET
The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew
More informationPowered-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Powered-off Protection,, 1. V to 5.5 V, SPDT Analog Switch (:1 Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for 1. V to 5.5 V operation with
More informationSTM1831. Voltage detector with sense input and external delay capacitor. Features. Applications
Voltage detector with sense input and external delay capacitor Features Voltage monitored on separate sense input V SEN Factory-trimmed voltage thresholds in 100 mv increments from 1.6 V to 5.7 V ±2% voltage
More informationRT9166/A. 300/600mA, Ultra-Fast Transient Response LDO Regulator. General Description. Features. Applications. Ordering Information
RT9166/A 300/600mA, Ultra-Fast Transient Response LDO Regulator General Description The RT9166/A series are CMOS low dropout regulators optimized for ultra-fast transient response. The devices are capable
More information2-input EXCLUSIVE-OR gate
Rev. 01 7 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input EXCLUSIVE-OR function. Symmetrical output
More informationThe 74HC21 provide the 4-input AND function.
Rev. 03 12 November 2004 Product data sheet 1. General description 2. Features 3. Quick reference data The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL).
More informationDATASHEET CA3162. Features. Description. Ordering Information. Pinout. Functional Block Diagram. A/D Converters for 3-Digit Display
DATASHEET CA A/D Converters for -Digit Display Features Dual Slope A/D Conversion Multiplexed BCD Display Ultra Stable Internal Band Gap Voltage Reference Capable of Reading 99mV Below Ground with Single
More information2Ω, Quad, SPST, CMOS Analog Switches
9-73; Rev ; 4/ 2Ω, Quad, SPST, CMOS Analog Switches General Description The // quad analog switches feature.6ω max on-resistance (R ) when operating from a dual ±5V supply. R is matched between channels
More informationObsolete Product(s) - Obsolete Product(s)
DUAL 4 CHANNEL MULTIPLEXER 3 STATE OUTPUT HIGH SPEED: t PD = 16ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
More informationSGM nA, Single Rail-to-Rail I/O Operational Amplifier
GENERAL DESCRIPTION The SGM8041 is guaranteed to operate with a single supply voltage as low as 1.4V, while drawing less than 710nA (TYP) of quiescent current. This device is also designed to support rail-to-rail
More informationPart Number Order Number Package Marking Supplying Form PG2417T6M-E2 CAUTION
GaAs Integrated Circuit SP6T Switch for NFC Application DESCRIPTION Data Sheet The PG2417T6M is a GaAs MMIC for SP6T (Single Pole Six Throw) switch for NFC (Near Field Communication) application. This
More information