Surface Mount Miniature Trimmers Single-Turn Cermet Sealed
|
|
- Ralf French
- 5 years ago
- Views:
Transcription
1 The trimming potentiometer hs een designed for surfe mount pplitions nd offers volumetri effiieny ( x x.7 mm) with high performne nd stility. The design is suitle for oth mnul or utomti opertion, nd n withstnd wve, nd reflow soldering tehniques. FEATURES 0. W t 70 C For PCB version see T3Y series Wide ohmi rnge (10 Ω to 1 MΩ) Smll size for optimum pking density Suitle for oth mnul or utomti opertion RoHS omplint sine dt ode 044 DIMENSIONS in millimeters (± 0. mm) RECOMMENDED SOLDERING AREAS YL YJ YL YJ A x 0.9 x Cruiform srewdriver slot Ø., width 0. Deep: 0. Mx. deep (enter): 0.7 Tolernes unless otherwise speified ± 0. mm For tehnil questions, ontt: sfer@vishy.om Doument Numer: Revision: -De-08
2 ELECTRICAL SPECIFICATIONS Resistive Element Cermet Eletril Trvel 0 ± 1 Resistne Rnge 10 Ω to 1 MΩ Stndrd Series Tolerne Stndrd ± 0 % CIRCUIT DIAGRAM Vrition Lw liner (1) () w (3) 0. W t 70 C 0. Power Rting POWER IN W Temperture Coeffiient Limiting Element Voltge (Liner Lw) Contt Resistne Vrition End Resistne (Typil) Dieletri Strength (RMS) Insultion Resistne AMBIENT TEMPERATURE IN C See Stndrd Resistne Element Dt 00 V 1 % or 3 Ω 0.1 % or 3 Ω 1000 V 1 GΩ MECHANICAL SPECIFICATIONS Mehnil Trvel 70 ± 10 Operting Torque (mx. Nm) 1. End Stop Torque (mx. Nm) 3. Net Weight (mx. g) 0.1 Terminls Pure Sn (e3) ENVIRONMENTAL SPECIFICATIONS Temperture Rnge - C to + 1 C Climti Ctegory /1/6 Seling Seled ontiner IP67 MSL Level 4 Doument Numer: 1008 For tehnil questions, ontt: sfer@vishy.om Revision: -De-08 19
3 PERFORMANCE TESTS Lod Life Climti Sequene Long Term Dmp Het CONDITIONS 1000 hours t rted power 90'/30' - mient temperture + 70 C Phse A dry het 1 C Phse B dmp het Phse C old - C Phse D dmp het yles Temperture 40 C - RH 93 % 6 dys Therml Shok C to + 1 C - yles ± 1 % TYPICAL VALUES AND DRIFTS ΔRT RT (%) Rottionl Life (Eletril nd Mehnil) 100 yles - rted power ± (3 % + Ω) Shok Virtion 0 g - 11 ms 3 suessive shoks in 3 diretions 10 - Hz 0.7 mm or 10 g - 6 hours ΔR1- R1- (%) ± % ± 3 % Contt resistne vrition: ΔR < 1 % Rn ± % ± 3 % ± % ± 3 % Dieletri strength: 1000 V RMS Insultion resistne: > 10 4 MΩ ± 1 % ± 1 % ΔV1- V1-3 ± % ΔV1- V1-3 ± 1 % ΔV1- V1-3 ± 1 % STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES MAX. POWER AT 70 C LINEAR LAW MAX. WORKING VOLTAGE MAX. CUR. THROUGH ELEMENT TYPICAL TCR - C + 1 C Ω W V ma ppm/ C K K K 10K 0K 0K 100K 00K 00K 1M ± 100 MARKING VISHAY trdemrk, ohmi vlue, mnufturing dte. The ohmi vlue is indited y 3 figure ode, the first two re signifint figures, the third one is the multiplier. Exmple: 100 = 10 Ω 101 = 100 Ω 10 = 1000 Ω 03 = Ω SOLDERING RECOMMENDATIONS See Applition notes CAUTION Reflow soldering must e done within 7 h while stored under mx. temperture of 30 C, 60 % RH fter opening the dry pk envelope. RECOMMENDED METHOD OF STORAGE Dry ox storge is reommended s soon s the hermeti g hs een opened to prevent moisture sorption. The following onditions should e oserved, if dry oxes re not ville: Storge temperture 10 C to 30 C Storge humidity 60 % RH mx. After more thn 7 h under these onditions, moisture ontent will e too high for reflow soldering. In se of moisture sorption, the devies will reover to the former ondition y drying under the following ondition: 19 h t 40 C + C/- 0 C nd < % RH (dry ir/nitrogen) or 96 h t 60 C + C nd < % RH for ll devie ontiners (not suitle for reel) or 4 h t 1 C + C (not suitle for reel) For tehnil questions, ontt: sfer@vishy.om Doument Numer: Revision: -De-08
4 PACKAGING On tpe nd reel of 00 piees, ode R10 (TR00) nd 000 piees, ode R0 (TR000) 3 solts - width to 10 - ø ext. 3 Ø 1.7 Ø Ø 178 ± Ø 1. Cover tpe pnel strength speifitions EIA 481 A nd CEI DRYPACK Devies re pked in moisture rrier gs to prevent the produts from moisture sorption during trnsporttion nd storge. Eh g ontins desint. SAP ORDERING INFORMATION (Prt Numer 1 digits) T S 3 Y L 0 4 M R 1 0 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING YL YJ From 10 Ω to 1 MΩ 04 = 00 kω ± 0 % R10 = Reel 00 piees R0 = Reel 000 piees SPECIAL NUMBER (if pplile) Given y VISHAY for ustom design PART NUMBER DESCRIPTION (for informtion only) YL 00K 0 % TR00 e3 MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD (P)-FREE Doument Numer: 1008 For tehnil questions, ontt: sfer@vishy.om Revision: -De-08 1
5 Legl Dislimer Notie Vishy Dislimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishy Intertehnology, In., its ffilites, gents, nd employees, nd ll persons ting on its or their ehlf (olletively, Vishy ), dislim ny nd ll liility for ny errors, inuries or inompleteness ontined in ny dtsheet or in ny other dislosure relting to ny produt. Vishy mkes no wrrnty, representtion or gurntee regrding the suitility of the produts for ny prtiulr purpose or the ontinuing prodution of ny produt. To the mximum extent permitted y pplile lw, Vishy dislims (i) ny nd ll liility rising out of the pplition or use of ny produt, (ii) ny nd ll liility, inluding without limittion speil, onsequentil or inidentl dmges, nd (iii) ny nd ll implied wrrnties, inluding wrrnties of fitness for prtiulr purpose, non-infringement nd merhntility. Sttements regrding the suitility of produts for ertin types of pplitions re sed on Vishy s knowledge of typil requirements tht re often pled on Vishy produts in generi pplitions. Suh sttements re not inding sttements out the suitility of produts for prtiulr pplition. It is the ustomer s responsiility to vlidte tht prtiulr produt with the properties desried in the produt speifition is suitle for use in prtiulr pplition. Prmeters provided in dtsheets nd/or speifitions my vry in different pplitions nd performne my vry over time. All operting prmeters, inluding typil prmeters, must e vlidted for eh ustomer pplition y the ustomer s tehnil experts. Produt speifitions do not expnd or otherwise modify Vishy s terms nd onditions of purhse, inluding ut not limited to the wrrnty expressed therein. Exept s expressly indited in writing, Vishy produts re not designed for use in medil, life-sving, or life-sustining pplitions or for ny other pplition in whih the filure of the Vishy produt ould result in personl injury or deth. Customers using or selling Vishy produts not expressly indited for use in suh pplitions do so t their own risk. Plese ontt uthorized Vishy personnel to otin written terms nd onditions regrding produts designed for suh pplitions. No liense, express or implied, y estoppel or otherwise, to ny intelletul property rights is grnted y this doument or y ny ondut of Vishy. Produt nmes nd mrkings noted herein my e trdemrks of their respetive owners. Mteril Ctegory Poliy Vishy Intertehnology, In. herey ertifies tht ll its produts tht re identified s RoHS-Complint fulfill the definitions nd restritions defined under Diretive 011/6/EU of The Europen Prliment nd of the Counil of June 8, 011 on the restrition of the use of ertin hzrdous sustnes in eletril nd eletroni equipment (EEE) - rest, unless otherwise speified s non-omplint. Plese note tht some Vishy doumenttion my still mke referene to RoHS Diretive 00/9/EC. We onfirm tht ll the produts identified s eing omplint to Diretive 00/9/EC onform to Diretive 011/6/EU. Vishy Intertehnology, In. herey ertifies tht ll its produts tht re identified s Hlogen-Free follow Hlogen-Free requirements s per JEDEC JS709A stndrds. Plese note tht some Vishy doumenttion my still mke referene to the IEC definition. We onfirm tht ll the produts identified s eing omplint to IEC onform to JEDEC JS709A stndrds. Revision: 0-Ot-1 1 Doument Numer: 91000
3/8" Square (10 mm) Multi-Turn Cermet Trimmer
3/8" Squre ( mm) Multi-Turn Cermet FEATURES Industril grde W t 70 C Tests ording to CECC 400 or IEC 60393-1 Contt resistne vrition < 1 % typil Complint to RoHS Diretive 2002/95/EC The Model is smll size
More information5 mm Square Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed
www.vishy.om Vishy Sfernie mm Squre Surfe Mount Miniture Trimmers Single-Turn Cermet Fully Seled The trimming potentiometer hs een designed for surfe mount pplitions nd offers volumetri effiieny ( mm x
More informationMulti-Turn Surface Mount 1/4" Square Cermet Trimmers, Fully Sealed
www.vishy.om Vishy Sfernie Multi-Turn Surfe Mount /4" Squre Cermet Trimmers, Fully Seled The multiturn trimmer hs een designed for use in PCB surfe mounting pplitions. Three vritions re ville ording to
More information3/8" Square (10 mm) Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre ( mm) Multi-Turn Cermet Trimmer FEATURES Industril grde W t 70 C Vishy Spetrol Tests ording to CECC 400 or IEC 60393-1 Contt resistne vrition < 2 % Mteril tegoriztion: for definitions
More informationFully Sealed Container Cermet Potentiometer Professional Grade
Fully Seled Continer Cermet Potentiometer Professionl Grde Their exellent performnes re due to the use of ermet-trk seled in lrge se. interhngeility with RV6, omined with the exellent stility of its rted
More informationThick Film Resistor Array
, CRA12S Thick Film Resistor Arry STANDARD ELECTRICAL SPECIFICATIONS CRA12S POER RATING P 70 C LIMITING ELEMENT VOLTAGE MAX. V FEATURES Convex terminl rry vilble with either sclloped corners (E version)
More informationThick Film Chip Resistor Array
STANDARD ELECTRICAL SPECIFICATIONS CRA12E CRA12S Thick Film Chip Resistor Arry POER RATING P 70 C LIMITING ELEMENT VOLTAGE MAX. V FETAURES Convex terminl rry vilble with either sclloped corners (E version)
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationVishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546
RH, NH FETURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 vailable in non-inductive styles (type NH) with ryton- Perry
More informationTable of Content. c 1 / 5
Tehnil Informtion - t nd t Temperture for Controlger 03-2018 en Tble of Content Introdution....................................................................... 2 Definitions for t nd t..............................................................
More informationMC14001UB, MC14011UB. UB-Suffix Series CMOS Gates
MC4UB, MC4UB UB-Suffix Series CMOS Gtes The UB Series logi gtes re onstruted with P nd N hnnel enhnement mode devies in single monolithi struture (Complementry MOS). Their primry use is where low power
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-ETS..-M3, VS-TS..-M3 High Voltage, Input Retifier Diode, 3 L TO-C Base athode 3 Cathode node VS-ETS.. 3 PRIMRY CHRCTERISTICS 3L TO-B Cathode to base 3 node node VS-TS.. I F(V) V R 8 V, V V F at I F.
More informationVS-5EWL06FN-M3. Ultralow V F Ultrafast Rectifier, 5 A FRED Pt. Vishay Semiconductors. FEATURES DESCRIPTION / APPLICATIONS
Ultralow V F Ultrafast Rectifier, 5 FRED Pt FETURES TO-252 (D-PK) N/ 2, 4 3 node Ultrafast recovery time, extremely low V F and soft recovery 75 maximum operating junction temperature For PF DM operation
More informationHyper Fast Rectifier, 8 A FRED Pt
Hyper Fast Rectifier, 8 FRED Pt 2 3 DPK (TO-252) N/ 2, 3 node PRIMRY HRTERISTIS Package DPK (TO-252) I F(V) 8 V R 600 V V F at I F.3 V t rr (typ.) 8 ns T J max. 75 ircuit configuration Single die FETURES
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationUltrafast Rectifier, 2 x 15 A FRED Pt
Ultrafast Rectifier, x 5 FRED Pt ommon cathode, Base FETURES Ultrafast recovery time Low forward voltage drop 75 operating junction temperature 3 TO-47 3L node 3 node Low leakage current Designed and qualified
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
Ultrafast Soft Recovery Diode, 60 FRED Pt FETURES Ultrafast recovery time 3 2 TO-247D 2L athode to base 2 3 athode node Low forward voltage drop 75 operating junction temperature Designed and qualified
More informationUltrafast Rectifier, 2 x 30 A FRED Pt
Ultrafast Rectifier, x 30 FRED Pt TO-47 PRODUT SUMMRY node Base common cathode 3 ommon cathode node Package TO-47 I F(V) x 30 V R 400 V V F at I F 0.9 V t rr typ. 37 ns T J max. 75 Diode variation ommon
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationSEMICONDUCTOR TECHNICAL DATA
SEMIONDUTOR TEHNIL DT The M4U multi purpose devie oists of three N hnnel nd three P hnnel enhnement mode devies pkged to provide ess to eh devie. These verstile prts re useful in inverter iruits, pulse
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationConformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks
Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationHyperfast Rectifier, 1 A FRED Pt
Hyperfast Rectifier, 1 A FRED Pt SMF (DO-219AB) Cathode Anode FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 17 C maximum operating junction temperature Low forward voltage drop Low
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationCML: Series Low Resistance Chip Resistor Specification
CML: Series Low Resistnce Chip Resistor Specifiction 1. Scope This specifiction pplies to CML**** Series Low Resistnce Chip Resistor for use in electric equipment. *****METAL FOIL***** 2. Prt number CML
More informationZener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box
Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes
More informationAluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationMC14000UB SEMICONDUCTOR TECHNICAL DATA
SEIONDUTOR TEHNIAL DATA The UB dul input NOR gte plus inverter is otruted with OS P hnnel nd N hnnel enhnement mode devies in single monolithi struture. These omplementry OS logi gtes find primry use where
More informationVS-HFA08SD60SPbF. HEXFRED Ultrafast Soft Recovery Diode, 8 A. Vishay Semiconductors. FEATURES BENEFITS PRODUCT SUMMARY
HEXFRED Ultrafast Soft Recovery Diode, 8 2, 4 FETURES Ultrafast recovery time Ultrasoft recovery Very low I RRM 3 TO-252 (D-PK) N/C node PRODUCT SUMMRY Package TO-252 (D-PK) I F(V) 8 V R 600 V V F at I
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise TZMC-
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBPW34S VBPW34SR 21733 VBPW34S and VBPW34SR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
More informationIMPROVED PRODUCT Note 1. Tighter performances are available. SMR1DZ/SMR3DZ (Z-Foil)
Ultra High Precision Z-Foil Molded Surface Mount Resistor with TCR down to ± 0.05 ppm/ C, PCR of ± 5 ppm at Rated Power, Flexible Terminations, and Load Life Stability of ± 0.005 % (50 ppm) Any value at
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More information2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design
VBUS5M2-HT1 2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design 1 22814 3 MRKING (example only) Bar = cathode marking X = date code Y = type code (see
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationCarbon Film Resistors, Standard
LCA... STANDARD ELECTRICAL SPECIFICATIONS FEATURES Securely bonded carbon film Good moisture resistance (ΔR max ±.5 % R) Good long term stability (ΔR max ±.5 % R, for h) Lead (Pb)-free solder contacts
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationLead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise AEC-Q qualified Compliant to RoHS Directive 22/95/EC and in accordance to WEEE
More informationSMR1D/SMR3D. Vishay Foil Resistors FEATURES INTRODUCTION APPLICATIONS. TABLE 1 - THE SMRxD SERIES IS LISTED IN THE FOLLOWING DSCC SPECIFICATIONS
High Precision Bulk Metal Foil Molded Surface Mount Resistor with TCR down to ± 2 ppm/ C, Flexible Terminations, and Load Life Stability of ± 0.005 % (50 ppm) Any value at any tolerance available within
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with enhanced sensitivity for visible light. It is a low profile surface-mount device (SMD) including the chip with
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
More informationUltrafast Rectifier, 8 A FRED Pt
Ultrafast Rectifier, 8 FRED Pt 2L TO-220C Base cathode 2 2L TO-220 FULL-PK FETURES State of the art low forward voltage drop Ultrafast recovery time 75 C operating junction temperature Low leakage current
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationContents Notice Product Lineup Tactile Push Switches (Double Action Type) Double Action Type
Swithes SWT07 E-0 Contents Contents... Notie... Slide Swithes Produt Lineup... 3... 4 Ttile Push Swithes (Doule Ation Type) Doule Ation Type... 5-7 Doule Ation Type with lever Swith... 8 Multi-Diretion
More informationHyperfast Rectifier, 2 x 15 A FRED Pt
Hyperfast Rectifier, 2 x 5 FRED Pt 3L TO-220B PRIMRY CHRCTERISTICS Base common cathode 2 2 Common node cathode node 3 Package 3L TO-220B I F(V) 2 x 5 V R 300 V V F at I F 0.85 V t rr typ. See Recovery
More informationFEATURES DESCRIPTION APPLICATIONS
Ultralow V F Hyperfast Rectifier for Discontinuous Mode PFC, 5 FRED Pt 3 2L TO-22C 2 FETURES Hyperfast recovery time Benchmark ultralow forward voltage drop 75 C operating junction temperature Low leakage
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationPower Resistors for Mounting Onto a Heatsink Thick Film Technology
Power Resistors for Mounting Onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO20 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 1.25 4.5 FEATURES 20 W at 25 C case temperature Surface mounted resistor - TO - 263 (D2 PAK) style package Wide resistance range
More informationSurface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
More informationThrough Hole Transformers, Pulse, Trigger Type
Through Hole Transformers, Pulse, Trigger Type STANDARD ELECTRICAL SPECIFICATIONS PRIMARY IND. MIN. (mh) PRIMARY DCR MAX. ( ) Notes () Hipot voltage will meet international safety standards () Low profile
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationSolid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
More informationSilicon PIN Photodiode
VEMD550CF Silicon PIN Photodiode DESCRIPTION VEMD550CF is a high speed and high sensitive PIN photodiode. It is a low profile surface-mount device (SMD) including the chip with a 7.5 mm 2 sensitive area
More informationA = Lin. B = Log. C = Alog. Tolerance 3030 = ± 30% 2020 = ± 20% 1010 = ± 10% 0505 = ± 5% (See note 2) Example: +17% -15%
PSC-0 MIN FETURES 0mm SMD cermet Potentiometer Specifically designed for leadfree reflow soldering processes (excellent performance). Cermet resistive element. IP4 protection according to IEC 609. Plastic
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
More informationLead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors
Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V
More information8-Channel, Dual 4-Channel, Triple 2-Channel Multiplexers
8-hannel, Dual 4-hannel, Triple 2-hannel Multiplexers DESRIPTION The DG92, DG922, and DG923 are high precision single and dual supply MOS analog multiplexers. DG92 is an 8-channel multiplexer, the DG922
More informationHyperfast Rectifier, 30 A FRED Pt
VS-30CTH0S-M3, VS-30CTH0--M3 Hyperfast Rectifier, 30 FRED Pt 3 D PK (TO-63) ase Common Cathode Common Cathode 3 node node VS-30CTH0S-M3 3 PRIMRY CHRCTERISTICS TO-6 ase Common Cathode Common Cathode 3 node
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 Ωto 1 MΩ Non inductive Easy mounting Low thermal radiation of the case
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationThick Film Chip Resistors, Military/Established Reliability MIL-PRF Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability Qualified, Type RM MECHANICAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination Solder-coated
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationCeramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationSurface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
More informationHyperfast Rectifier, 30 A FRED Pt
VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 Hyperfast Rectifier, 30 FRE Pt FETURES Low forward voltage drop Hyperfast soft recovery time 75 operating junction temperature TO-247 Base cathode
More informationHyperfast Rectifier, 8 A FRED Pt
Hyperfast Rectifier, 8 FRED Pt Vishay Semiconductors 2L TO-220C Base cathode 2 2L TO-220 FULL-PK FETURES Hyperfast soft recovery time Low forward voltage drop 75 C operating junction temperature Low leakage
More informationThick Film Chip Resistors, Military/Established Reliability MIL-PRF Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes
More informationSilicon PIN Photodiode
TEMD5080X01 DESCRIPTION 20535 TEMD5080X01 is a PIN photodiode with enhanced blue sensitivity. The miniature surface mount package (SMD) include a chip with 7.7 mm 2 sensitive area, covered by clear epoxy.
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
VS-60EPU02PbF, VS-60EPU02-N3, VS-60PU02PbF, VS-60PU02-N3 Ultrafast Soft Recovery iode, 60 FRE Pt FETURES Ultrafast recovery time TO-247 modified Base common cathode 2 TO-247 Base common cathode 2 Low forward
More informationSurface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
More informationSTPSC16H065A. 650 V power Schottky silicon carbide rectifier. Datasheet. Features. Applications. Description
Dtsheet 65 V power Schottky silicon crbide rectifier NC A TO-247 K A K NC Fetures No or negligible reverse recovery Temperture independent switching behvior High forwrd surge cpbility Operting T j from
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationHigh Brightness LED Power Module
High Brightness LED Power Module 22139 22438 DESCRIPTION VLPC0303A2, and VLPW0303A2 are metal core based high brightness LED power modules assembled with 9 HB white LEDs. VLPC0303A2 is a cool white version
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationAluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More information