Small Signal Zener Diodes
|
|
- Jasmine Fisher
- 6 years ago
- Views:
Transcription
1 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise TZMC- V Z -tolerance ± 5 % TZMB- V Z -tolerance ± 2 % AEC-Q qualified Material categorization: For definitions of compliance please see APPLICATIONS Voltage stabilization Test current I ZT 2.5; 5 ma V Z specification Int. construction Pulse current Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY TZM-series TZM-series-GS8 (8 mm tape on 3" reel) /box TZM-series TZM-series-GS8 25 (8 mm tape on 7" reel) 2 5/box PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MiniMELF SOD-8 3 mg UL 94 V- MOISTURE SENSITIVITY LEVEL MSL level (according J-STD-2) SOLDERING CONDITIONS 26 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation R thja 3 K/W P tot 5 mw Zener current I Z P tot /V Z ma Junction to ambient air On PC board 5 mm x 5 mm x.6 mm R thja 5 K/W Junction temperature T j 75 C Storage temperature range T stg - 65 to + 75 C Forward voltage (max.) I F = 2 ma V F.5 V Rev..6, 22-Nov-2 Document Number: 8422 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) RANGE TEST CURRENT REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE Notes Additional measurement of voltage group TZMC9V to TZMC75, I R at 95 % V Zmin. 35 na at () at T j = 5 C TEMPERATURE COEFFICIENT OF PART NUMBER V Z at I ZT I ZT I ZT2 I R at V R I () R at V R Z Z at I ZT Z ZK at I ZT2 TK VZ V ma μa V μa V %/K MIN. NOM. MAX. TYP. TYP. MIN. MAX. TZMC2V < 5 < < 85 < TZMC2V < < 5 < 85 < TZMC3V < 4 < 4 < 9 < TZMC3V < 2 < 4 < 9 < TZMC3V < 2 < 4 < 9 < TZMC3V < 2 < 4 < 9 < TZMC4V < < 2 < 9 < TZMC4V <.5 < < 8 < TZMC5V <. < 2 < 6 < TZMC5V <. < 2 < 4 < TZMC6V <. 2 < 2 2 < < TZMC6V <. 3 < 2 3 < 8 < TZMC7V <. 5 < 2 5 < 7 < TZMC8V <. 6.2 < < 7 < TZMC9V <. 6.8 < < < TZMC <. 7.5 < < 5 < 7.3. TZMC <. 8.2 < < 2 < 7.3. TZMC <. 9. < 2 9. < 2 < 9.3. TZMC <. < 2 < 26 <.3. TZMC <. < 2 < 3 <.3. TZMC <. 2 < 2 2 < 4 < 7.3. TZMC <. 3 < 2 3 < 5 < 7.3. TZMC <. 5 < 2 5 < 55 < TZMC <. 6 < 2 6 < 55 < TZMC <. 8 < 2 8 < 8 < 22.4,2 TZMC <. 2 < 2 2 < 8 < TZMC <. 22 < 2 22 < 8 < TZMC <. 24 < 2 24 < 8 < TZMC <. 27 < 2 27 < 8 < TZMC <. 3 < 5 3 < 9 < TZMC <. 33 < 5 33 < 9 < TZMC <. 36 < 5 36 < < TZMC <. 39 < 39 < 25 < TZMC <. 43 < 43 < 35 <.4.2 TZMC <. 47 < 47 < 5 <.4.2 TZMC <. 5 < 5 < 2 <.4.2 TZMC <. 56 < 56 < 25 < Rev..6, 22-Nov-2 2 Document Number: 8422 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) RANGE TEST CURRENT REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE Notes Additional measurement of voltage group TZMB9V to TZMB75, I R at 95 % V Zmin. 35 na at () at T j = 5 C TEMPERATURE COEFFICIENT OF PART NUMBER V Z at I ZT I ZT I ZT2 I R at V R I () R at V R Z Z at I ZT Z ZK at I ZT2 TK VZ V ma μa V μa V %/K MIN. NOM. MAX. TYP. TYP. MIN. MAX. TZMB2V < 5 < < 85 < TZMB2V < < 5 < 85 < TZMB3V < 4 < 4 < 9 < TZMB3V < 2 < 4 < 9 < TZMB3V < 2 < 4 < 9 < TZMB3V < 2 < 4 < 9 < TZMB4V < < 2 < 9 < TZMB4V <.5 < < 8 < TZMB5V <. < 2 < 6 < TZMB5V <. < 2 < 4 < TZMB6V <. 2 < 2 2 < < TZMB6V <. 3 < 2 3 < 8 < TZMB7V <. 5 < 2 5 < 7 < TZMB8V <. 6.2 < < 7 < TZMB9V <. 6.8 < < < TZMB <. 7.5 < < 5 < 7.3. TZMB <. 8.2 < < 2 < 7.3. TZMB <. 9. < 2 9. < 2 < 9.3. TZMB <. < 2 < 26 <.3. TZMB <. < 2 < 3 <.3. TZMB <. 2 < 2 2 < 4 < 7.3. TZMB <. 3 < 2 3 < 5 < 7.3. TZMB <. 5 < 2 5 < 55 < TZMB <. 6 < 2 6 < 55 < TZMB <. 8 < 2 8 < 8 < 22.4,2 TZMB <. 2 < 2 2 < 8 < TZMB <. 22 < 2 22 < 8 < TZMB <. 24 < 2 24 < 8 < TZMB <. 27 < 2 27 < 8 < TZMB <. 3 < 5 3 < 9 < TZMB <. 33 < 5 33 < 9 < TZMB <. 36 < 5 36 < < TZMB <. 39 < 39 < 25 < TZMB <. 43 < 43 < 35 <.4.2 TZMB <. 47 < 47 < 5 <.4.2 TZMB <. 5 < 5 < 2 <.4.2 TZMB <. 56 < 56 < 25 < Rev..6, 22-Nov-2 3 Document Number: 8422 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) P tot - Total Power Dissipation (mw) T amb - Ambient Temperature ( C) Fig. - Total Power Dissipation vs. Ambient Temperature TK VZ - Temperature Coefficient of V Z ( -4 /K) I Z = 5 ma Fig. 4 - Temperature Coefficient of V Z vs. Z-Voltage 2 V Z - Voltage Change (mv) I Z = 5 ma C D - Diode Capacitance (pf) 5 5 V R = 2 V Fig. 2 - Typical Change of Working Voltage under Operating Conditions at T amb = 25 C Fig. 5 - Diode Capacitance vs. Z-Voltage V Ztn - Relative Voltage Change.3 V Ztn = V Zt /V Z (25 C).2 TK VZ = x -4 /K 8 x -4 /K 6 x -4 /K. 4 x -4 /K 2 x -4 /K. - 2 x -4 /K - 4 x.9-4 /K T j - Junction Temperature ( C) I F - Forward Current (ma) V F - Forward Voltage (V). Fig. 3 - Typical Change of Working Voltage vs. Junction Temperature Fig. 6 - Forward Current vs. Forward Voltage Rev..6, 22-Nov-2 4 Document Number: 8422 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 I Z - Z-Current (ma) P tot = 5 mw T amb = 25 C r Z - Differential Z-Resistance (Ω) I Z = ma 5 ma ma Fig. 7 - Z-Current vs. Z-Voltage Fig. 9 - Differential Z-Resistance vs. Z-Voltage 5 I Z - Z-Current (ma) P tot = 5 mw T amb = 25 C Fig. 8 - Z-Current vs. Z-Voltage Z thp - Thermal Resistance for Pulse Cond. (K/W) t p /T =.5 t p /T =.2 Single Pulse R thja = 3 K/W T = T j max. - T amb t p /T =. t p /T =. t p /T =.2 t p /T =.5 i ZM = (- V Z + (V 2 Z + 4r zj x T/Z thp ) /2 )/(2r zj ) - 2 t p - Pulse Length (ms) Fig. - Thermal Response Rev..6, 22-Nov-2 5 Document Number: 8422 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-8 Cathode indentification.47 (.9) max. 3.7 (.46) 3.3 (.3) 2.5 (.98) max..25 (.49) min. 2 (.79) min..6 (.63).4 (.55) * * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: Document no.: Rev. 8 - Date: 7.June (.97) ref. Rev..6, 22-Nov-2 6 Document Number: 8422 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2/65/EU of The European Parliament and of the Council of June 8, 2 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 22/95/EC. We confirm that all the products identified as being compliant to Directive 22/95/EC conform to Directive 2/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS79A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC JS79A standards. Revision: 2-Oct-2 Document Number: 9
Small Signal Zener Diodes
Small Signal Zener Diodes FEATURES Very sharp reverse characteristic Low reverse current level Very high stability Low noise AEC-Q qualified Compliant to RoHS Directive 22/95/EC and in accordance to WEEE
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes DESIGN SUPPORT TOOLS click logo to get started FEATURES Very sharp reverse characteristic Low reverse current level Available with tighter tolerances Very high stability Low noise
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT 2.5; 5 ma V Z specification Pulse current Int. construction Single FEATURES Saving space
More informationZener Diodes FEATURES APPLICATIONS. MINIMUM ORDER QUANTITY BZX85-series BZX85-series-TR 5000 (52 mm tape on 13" reel) /box
Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom.. to V Test current I ZT. to 8 ma V Z specification Pulse current Int. construction Single FEATURES Silicon planar power Zener diodes
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSmall Signal Zener Diodes, Dual
DZ-V-G Series Small Signal Zener Diodes, Dual PRIMERY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current FEATURES Dual silicon planar Zener diodes, common
More informationZener Diodes FEATURES APPLICATIONS
Zener Diodes SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 00 V Test current I ZT.7 to 80 ma V BR 5. to 95 V V WM 4.7 to 90 V P PPM 40 W T J max. 50 C V Z specification
More informationSmall Signal Zener Diodes, Dual
Small Signal Zener Diodes, Dual DESIGN SUPPORT TOOLS Models Available PRIMARY CHARACTERISTICS 6 PARAMETER VALUE UNIT range nom.. to V Test current T specification Pulse current Circuit configuration Dual
More informationParameter Test condition Symbol Value Unit. Mounted on epoxy-glass hard tissue, fig µm copper clad, 0.9 mm 2 copper area per electrode
Small Signal Zener Diodes Features Saving space Hermetic sealed parts Electrical data identical with the devices BZT55..Series/TZM..Series Fits onto SOD-323/SOD- footprints Very sharp reverse characteristic
More informationSmall Signal Zener Diodes, Dual
DZ-G Series Small Signal Zener Diodes, Dual PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T specification Pulse current Int. construction Dual common cathode FEATURES Dual silicon
More informationHyperfast Rectifier, 1 A FRED Pt
Hyperfast Rectifier, 1 A FRED Pt SMF (DO-219AB) Cathode Anode FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 17 C maximum operating junction temperature Low forward voltage drop Low
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- FL Weight: approx. 9. mg Packaging codes/options: 08/K per 7" reel (8 mm tape), 8K/box FEATURES Silicon epitaxial planar diode Fast switching
More informationSmall Signal Zener Diodes
BZT-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T.; ma specification Pulse current Int. construction Single FEATURES Silicon planar Zener diodes
More informationSmall Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching
More informationTELUX LED FEATURES APPLICATIONS COORDINATE. FORWARD VOLTAGE (V) (ma) at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. 0.33, 0.
TELUX LED DESCRIPTION The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More informationSmall Signal Zener Diodes
BZT-G-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT FEATURES Silicon planar power Zener diodes The Zener voltages are graded according to the international E standard AEC-Q
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
More informationSmall Signal Zener Diodes
Small Signal Zener Diodes BZX8-G-Series PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener diodes
More informationDual High-Voltage Trench MOS Barrier Schottky Rectifier
Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.53 V at I F = 5.0 A 2 TMBS esmp Series Top View PIN PIN 2 PRIMARY CHARACTERISTICS K Bottom View I F(AV) 2 x A V RRM 0 V I FSM 50
More informationConformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks
Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition
More informationHigh Brightness LED Power Module
High Brightness LED Power Module 22139 22438 DESCRIPTION VLPC0303A2, and VLPW0303A2 are metal core based high brightness LED power modules assembled with 9 HB white LEDs. VLPC0303A2 is a cool white version
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationSPECIFICATIONS (T J = 25 C, unless otherwise noted)
N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) () I D (A) a, e Q g (Typ.). at V GS = V. at V GS = 4.5 V nc DFN 3x3 EP Top View Bottom View FEATURES APPLICATIONS Top View D 3 4 8 7 6 5 G Pin
More informationHigh Current Density Surface Mount Trench MOS Barrier Schottky Rectifier
VP0 High Current Density Surface Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.43 V at I F = 5 A TMBS esmp Series TO-77A (SMPC) Anode Cathode Anode FEATURES Very low profile - typical height
More information4-Line BUS-Port ESD-Protection
4-Line BUS-Port ESD-Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = Pin 1 marking XX = Date code YY = Type code (see table below) 2453 1 XX YY 211 FEATURES Ultra compact LLP75-6L package 4-line
More informationAluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
More informationSilicon PIN Photodiode, RoHS Compliant
Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the
More informationParameter Test condition Symbol Value Unit Junction to ambient air on PC board. R thja 500 K/W 50 mm x 50 mm x 1.6 mm
Small Signal Zener Diodes Features Very sharp reverse characteristic Low reverse current level e2 Available with tighter tolerances Very high stability Low noise Lead (Pb)-free component Component in accordance
More informationThrough Hole Transformers, Pulse, Trigger Type
Through Hole Transformers, Pulse, Trigger Type STANDARD ELECTRICAL SPECIFICATIONS PRIMARY IND. MIN. (mh) PRIMARY DCR MAX. ( ) Notes () Hipot voltage will meet international safety standards () Low profile
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBPW34S VBPW34SR 21733 VBPW34S and VBPW34SR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive
More informationHigh Brightness LED Power Module
High Brightness LED Power Module Vishay Semiconductors 22139 22140 DESCRIPTION The VLSL41xxA are metal core based high brightness LED power modules, assembled with 12, 24 or 3 HB white LEDs. The color
More informationSolid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationTwo-Line ESD Protection in SOT-23
Two-Line ESD Protection in 2 3 20456 MARKING (example only) YYY = type code (see table below) XX = date code 1 XX YYY XX 20512 20357 1 FEATURES Two-line ESD-protection device ESD-protection acc. IEC 61000-4-2
More informationDual Low-Voltage Trench MOS Barrier Schottky Rectifier
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.3 V at I F = 5.0 A 2 TMBS esmp Series SMPD (TO-263AC) Top View PIN PIN 2 K K Bottom View HEATSINK FEATURES Trench MOS Schottky technology
More informationParameter Test condition Symbol Value Unit Power dissipation P tot 300 1) mw
DZ-V-Series Small Signal Zener Diodes, Dual Features These diodes are available in other case styles and configurations including: the dual diode common anode configuration with type designation AZ, the
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationHigh Current Density Surface-Mount Trench MOS Barrier Schottky Rectifier
High Current Density Surface-Mount Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0. V at I F = A FEATURES Trench MOS Schottky technology Available 8 Low forward voltage drop, low power losses High
More informationHigh Brightness LED Power Module
High Brightness LED Power Module VLSL3112A2, VLSL3124A2 Vishay Semiconductors 22454 22139 DESCRIPTION The VLSL3112A2, VLSL3124A2 are metal core based high brightness LED power modules, assembled with 12
More informationFEATURES. Heatsink. 1 2 Pin 1 Pin 2
Ultralow V F Ultrafast Rectifier, 8 A FRED Pt esmp Series 2 SlimDPAK (TO-252AE) k Heatsink k 2 Pin Pin 2 FEATURES Ultrafast recovery time, extremely low V F and soft recovery For PFC CCM operation Low
More informationSilicon PIN Photodiode
VEMD550CF Silicon PIN Photodiode DESCRIPTION VEMD550CF is a high speed and high sensitive PIN photodiode. It is a low profile surface-mount device (SMD) including the chip with a 7.5 mm 2 sensitive area
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with enhanced sensitivity for visible light. It is a low profile surface-mount device (SMD) including the chip with
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationTrench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.3 V at I F = 5 A TMBS esmp Series FEATURES Trench MOS Schottky technology Very low profile - typical height of.7
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationN-Channel 200-V (D-S) MOSFET
i6y N-Channel -V (-) MOFET PROUCT UMMARY V (V) R (on) (Ω) I (A).8 at V G = V.. at V G = 6. V. FEATURE Halogen-free According to IEC 69-- efinition TrenchFET Power MOFET PWM Optimized for fast witching
More informationBAV100/101/102/103. Small Signal Switching Diodes, High Voltage. Vishay Semiconductors
Small Signal Switching Diodes, High Voltage BAV/0/02/03 Features Silicon Epitaxial Planar Diodes Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e2 Applications
More informationLL4148 / LL4448. Small Signal Fast Switching Diodes. Vishay Semiconductors
Small Signal Fast Switching Diodes Features Silicon Epitaxial Planar Diodes Electrical data identical with the devices e2 N448 and N4448 respectively Lead (Pb)-free component Component in acc. to RoHS
More informationMOC8101, MOC8102, MOC8103, MOC8104, MOC8105 Optocoupler, Phototransistor Output, no Base Connection
MOC80, MOC80, MOC803, MOC80, MOC80 Optocoupler, Phototransistor Output, no Base Connection i79009- DESCRIPTION The MOC80, MOC80, MOC803, MOC80, MOC80 family optocoupler consisting of a gallium arsenide
More informationPart Ordering code Type Marking Remarks LL42 LL42-GS18 or LL42-GS08 - Tape and Reel LL43 LL43-GS18 or LL43-GS08 - Tape and Reel
Small Signal Schottky Diodes Features For general purpose applications These diodes feature very low turn-on voltage and fast switching. e2 These devices are protected by a PN junction guard ring against
More informationN-Channel 30 V (D-S) MOSFET
N-Channel 3 V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) ( ) (Max.) I (A) a Q g (Typ.) 3.8 at V GS = V 2.22 at V GS = 4. V 2 6 2. mm PowerPAK SC-7-6L-Single S 4 S 2 3 G 2. mm Bottom View Ordering Information:
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationComplementary (N- and P-Channel) MOSFET
Complementary (N- and P-Channel) MOSFET Si45BDY PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) N-Channel 3.7 at V GS = V 2.2 at V GS = 4.5 V 7.9 P-Channel -.27 at V GS = - 4.5 V -.37 at V GS
More informationP-Channel 8 V (D-S) MOSFET
SiA427J P-Channel 8 V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) ( ) I (A) Q g (Typ.).6 at V GS = - 4. V - 2 a - 8 ocument Number: 667 S2-4-Rev. C, 2-May-2.2 at V GS = - 2. V - 2 a.26 at V GS = -.8 V -
More informationV30100S-E3, VF30100S-E3, VB30100S-E3, VI30100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V3000S-E3, VF3000S-E3, VB3000S-E3, VI3000S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.39 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More informationP-Channel 30-V (D-S) MOSFET
P-Channel 3-V (-) MOFET TM443 PROUCT UMMARY V (V) - 3 R (on) ( ) at V G = - V.6 R (on) ( ) at V G = - 4. V.22 I (A) - 8 Configuration ingle O-8 FEATURE Halogen-free According to IEC 6249-2-2 efinition
More informationV20100S-E3, VF20100S-E3, VB20100S-E3, VI20100S-E3 High Voltage Trench MOS Barrier Schottky Rectifier
V200S-E3, VF200S-E3, VB200S-E3, VI200S-E3 High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.446 V at I F = 5 A TO-220AB TMBS ITO-220AB FEATURES Trench MOS Schottky technology Low forward
More informationThick Film Chip Resistors, Military/Established Reliability MIL-PRF Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination
More informationN-Channel 30-V (D-S) MOSFET
N-Channel -V (-) MOFET TM PROUCT UMMARY V (V) R (on) (Ω) I (A) a Q g (Typ.).9 at V G = V.8 nc. at V G =. V FEATURE Halogen-free TrenchFET Power MOFET Optimized for High-ide ynchronous Rectifier Operation
More informationAutomotive N- and P-Channel 100 V (D-S) 175 C MOSFET
SQJ57EP Automotive N- and P-Channel V (D-S) 75 C MOSFET PRODUCT SUMMARY N-CHANNEL P-CHANNEL V DS (V) - R DS(on) ( ) at V GS = ± V.45 46 R DS(on) ( ) at V GS = ± 4.5 V.58.265 I D (A) 5-9.5 Configuration
More informationPart Ordering code Marking Remarks 1N4148W-V 1N4148W-V-GS18 or 1N4148W-V-GS08 A2 Tape and Reel
N8W-V Small Signal Fast Switching Diode Features These diodes are also available in other case styles including the DO case with the type designation N8, the e MiniMELF case with the type designation LL8,
More informationHyperfast Rectifier, 8 A FRED Pt
Hyperfast Rectifier, 8 A FRED Pt L TO-0 FullPAK Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 8 A V R 600 V V F at I F.3 V t rr typ. 8 ns T J max. 75 C Package L TO-0 FullPAK Circuit configuration Single
More informationSilicon PIN Photodiode
TEMD5080X01 DESCRIPTION 20535 TEMD5080X01 is a PIN photodiode with enhanced blue sensitivity. The miniature surface mount package (SMD) include a chip with 7.7 mm 2 sensitive area, covered by clear epoxy.
More informationAutomotive N- and P-Channel 40 V (D-S) 175 C MOSFET
SQJ54EP Automotive N- and P-Channel 4 V (D-S) 75 C MOSFET 6.5 mm mm PowerPAK SO-8L Dual 5.3 mm D D 4 G 3 S G S FEATURES TrenchFET power MOSFET AEC-Q qualified % R g and UIS tested Material categorization:
More informationThick Film Chip Resistors, Military/Established Reliability MIL-PRF Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability Qualified, Type RM MECHANICAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination Solder-coated
More informationStandard Metal Film Leaded Resistors
Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes
More informationTELUX LED FEATURES APPLICATIONS WAVELENGTH. (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
TELUX LED DESCRIPTION 9232 The TELUX series is a clear, non-diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More informationN-Channel 20 V (D-S) MOSFET
N-Channel V (-S) MOSFET SiS6ENT 3.3 mm mm Top View PowerPAK -8S 3.3 mm 3 4 S G Bottom View PROUCT SUMMARY V S (V) R S(on) max. () at V GS = 4.5 V.39 R S(on) max. () at V GS = 3.7 V.4 R S(on) max. () at
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationParameter Test condition Symbol Value Unit Zener current (see Table "Electrical Characteristics") Power dissipation P tot 1.3
Zener Diodes Features Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating e The Zener voltages are graded according to the international E standard. Replace
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
More informationSilicon PIN Photodiode
TEMD7000X0 284 DESCRIPTION TEMD7000X0 is a high speed and high sensitive PIN photodiode. It is a miniature surface mount device (SMD) including the chip with a 0.23 mm 2 sensitive area detecting visible
More informationHigh Voltage Trench MOS Barrier Schottky Rectifier
High Voltage Trench MOS Barrier Schottky Rectifier Ultra Low V F = 0.50 V at I F = 5 A TO-220AB DESIGN SUPPORT TOOLS Models Available PIN PIN 3 NC A V2000SG PRIMARY CHARACTERISTICS I F(AV) 20 A V RRM 00
More informationAluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationSurface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationLead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationCemented Wirewound Resistors
Cemented Wirewound Resistors STANDARD EECTRICA SPECIFICATIONS MODE POWER RATING P 40 C W POWER RATING P 70 C W IMITING VOTAGE U max. Notes () Resistance value to be selected for ± 5 % from E24 (2) AC03
More informationPart Ordering code Type Marking Remarks 1N4148 1N4148-TAP or 1N4148-TR V4148 Ammopack/tape and reel
Small Signal Fast Switching Diodes Features Silicon epitaxial planar diodes Electrically equivalent diodes: e2 N448 - N94 Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
More informationN-Channel 60 V (D-S) MOSFET
N-Channel 6 V (-S) MOSFET SiA6J 2. mm Top View PowerPAK SC-7-6L Single 2. mm 2 3 G Bottom View PROUCT SUMMARY V S (V) 6 R S(on) max. () at V GS = V.8 R S(on) max. () at V GS = 7. V.22 Q g typ. (nc) 6.9
More informationN-Channel 30 V (D-S) MOSFET
N-Channel 3 V (-S) MOSFET PowerPAK 22-8 Single 8 5 6 7 FEATURES TrenchFET Gen IV power MOSFET % R g and UIS tested Material categorization: for definitions of compliance please see www.vishay.com/doc?9992
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationTELUX LED FEATURES. COLOR TEMPERATURE FORWARD VOLTAGE (mlm) at I F (V)
16 012 DESCRIPTION The TELUX series is a clear, non diffused LED for high end applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More informationOptocoupler, Phototransistor Output, no Base Connection
Optocoupler, Phototransistor Output, no Base Connection FEATURES A C NC 1 2 3 6 5 4 NC C E Isolation test voltage, 5 V RMS No base terminal connection for improved common mode interface immunity Long term
More informationOptocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package
TCMT11. Series Optocoupler, Phototransistor Output, Single Channel, Half Pitch Mini-Flat Package 22628-1 C E 4 3 1 2 DESCRIPTION The TCMT11. series consist of a phototransistor optically coupled to a gallium
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More information