Fully Sealed Container Cermet Potentiometer Professional Grade
|
|
- Mildred Morrison
- 6 years ago
- Views:
Transcription
1 Fully Seled Continer Cermet Potentiometer Professionl Grde Their exellent performnes re due to the use of ermet-trk seled in lrge se. interhngeility with RV6, omined with the exellent stility of its rted hrteristis mke it fully eptle for militry nd professionl uses. QUICK REFERENCE DATA Multiple module Swith module Detent module Speil eletril lws No n/ n/ A: liner, L: logrithmi, F: reverse logrithmi Seling level IP 67 Lifespn 2K yles FEATURES High power rting 1. W t 70 C Produt qulifition: Aording to CECC (A, B, C) Test ording to CECC or IEC GAM T1 Cermet element Fully seled se Tight temperture oeffiient (± 7 ppm/ C typil) Mehnil strength Mteril tegoriztion: for definitions of ompline plese see DIMENSIONS in millimeters (± 0.) T-(PC32) A 10. mx wrenh Thred M6 x Slot 0.6 x 1 deep Ø 2.2 AA = 9. AB = 12. Ø ± 0.2 Ø 6. AJ = 22 Q-B 10. mx wrenh Thred M7 x Slot x 1.4 deep Ø 2.2 EA = 9. EB = 12. Ø ± 0.2 Ø 7. EJ = 22 L-(PC33) C Ø 14 Thred M10 x 10. mx. 12 Slot 1 x 1.8 deep FG = 16 FL = 2 Ø 6 2 Ø 10. FR = 0 Revision: 04-Jul-17 1 Doument Numer: 1034
2 ELECTRICAL SPECIFICATIONS Resistive element Cermet Eletril trvel 270 ± 10 Resistne rnge liner tper 22 Ω to 10 MΩ logrithmi tper 1 kω to 2.2 MΩ Stndrd series e3 1, 2.2, 4.7 nd on request 1, 2, Tolerne stndrd ± 20 % on request ± 10 % to ± % 100 Tper % TOTAL RESISTANCE F A L % CLOCKWISE SHAFT ROTATION Ciruit digrm (1) (2) w (3) 1. LIN. TAPER A Power rting Liner 1. W t 70 C Logrithmi W t 70 C POWER IN W 1 0. LOG. TAPER L nd F AMBIENT TEMPERATURE IN C ± 10 ppm/ C Temperture oeffiient (typil) For vlues 100 Ω nd in temperture rnge +20 C to +70 C, the typil temperture oeffiient is ± 7 ppm/ C Limiting element voltge (liner lw) 30 V Contt resistne vrition 3 % Rn or 3 Ω End resistne (typil) 1 Ω Dieletri strength (RMS) 2000 V Insultion resistne (300 V DC ) 10 6 MΩ Independent linerity (typil) ± % Revision: 04-Jul-17 2 Doument Numer: 1034
3 STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES MAX. POWER AT 70 C LINEAR TAPER LOG. TAPER TYPICAL MAX. MAX. CUR. MAX. MAX. MAX. CUR. TCR WORKING THROUGH POWER WORKING THROUGH - C VOLTAGE WIPER AT 70 C VOLTAGE WIPER +12 C Ω W V ma W V ma ppm/ C K K K K K K K K K M M M M ± 10 MECHANICAL SPECIFICATIONS Mehnil trvel 300 ± Operting torque (typil) 2 Nm 2.8 oz. inh End stop torque style T, Q 3 Nm mx. 3.1 l inh mx. style L 80 Nm mx. 7.1 l inh mx. Tightening torque of mounting nut style T, Q 10 Nm mx l inh mx. style L 20 Nm mx l inh mx. Unit weight 6 g to 18 g 0.22 oz. to 0.64 oz. Terminls e3: pure Sn ENVIRONMENTAL SPECIFICATIONS Temperture rnge - C to +12 C Climti tegory / 12 / 6 Seling Fully seled - ontiner IP67 Revision: 04-Jul-17 3 Doument Numer: 1034
4 OPTIONS Speil feture ommnd shft Length is mesured from the mounting surfe to the free end of the shft. The srewdriver slot is ligned with the wiper within ± 10. Speil shfts re ville, in ordne to drwings supplied y ustomers. We reommend tht ustomers should not mhine tool shfts, in order to void dmge. Bending or torsion of terminls should lso e voided. Potentiometers T nd L n e fitted with devie providing seling etween the threded ushing nd the front pnel. Their designtion is P nd N respetively or with loting peg P...E nd N...E. Pnel seled version P P...E: Inluding loting peg 13.2 mx. 8 Thred M6 x Slot 0.6 x 1 deep Ø 1. Ø ± 0.2 AA = 9. AB = 12. Ø 6. Pnel seling AJ = 22 Pnel seled version N N...E: Inluding loting peg 13. mx. 9. Thred M10 x Slot 1 x 1.8 deep Ø 1. Ø 16 Ø 14 Ø ± 0.2 FE = 13. FK = 22. FQ = 47. Ø 10. On potentiometers equipped with 3 mm Ø shft, shft loking n e otined: Either y tper nut tightening slotted ushing. Ask for O type. These devies re normlly equipped with n AB type shft (12. mm with slot). O wrenh Slotted ushing Thred M6 x 8 wrenh Ø 3 Shft loking AB = 12. Or y tightening nut loked y srew. Ask for ES1 type. On potentiometers equipped with Ø 6 mm shft, loking n e otined y tper nut pplying pressure on slotted nothed wsher. This devie is supplied in ox s n essory. Ask for DBAN. These devies re ordered seprtely. Plese onsult. L DBAN 12 wrenh 6. No loking on shft Ø 4 mm. Revision: 04-Jul-17 4 Doument Numer: 1034
5 OPTIONS Produt in onformity with RN6/MIL-R-94/3G T-F RV6 (T-F) 2 ± ± 0.1 ± mx. 13. mx /4 x 32 NEF 2A Ø 6.3 x 32 threds per inh Ø 3.17 ± ± 0.4 MARKING Printed: Vishy trdemrk Prt numer (inluding ohmi vlue ode, tolerne ode nd tper) Mnufturing dte Mrking of terminls PACKAGING In ox PERFORMANCE TESTS Eletril endurne Climti sequene Dmp het, stedy stte Chnge of temperture Mehnil endurne Shok Virtion CONDITIONS ΔR T /R T REQUIREMENTS ΔR 1-2 /R 1-2 Note Nothing stted herein shll e onstrued s gurntee of qulity or durility OTHER 1000 h t rted power 90 /30 - mient temp. 70 C ± 10 % - Contt res. vrition: < 7 % Rn Phse A dry het 12 C Phse B dmp het Phse C old - C Phse D dmp het yles 6 dys 40 C, 93 % HR yles - C t +12 C ΔR T /R T TYPICAL VALUES AND DRIFTS ΔR 1-2 /R 1-2 ± 1 % - OTHER Contt res. vrition: < 3 % Rn ± 10 % ± 10 % - ± 0. % ± 1 % - ± 10 % ± 10 % yles ± 10 % - 0 g s t 11 ms 3 suessive shoks in 3 diretions 10 Hz to Hz mm or 10 g s during 6 h Dieletri strength: 20 V Insultion resistne: > 100 MΩ ± 0. % ± 1 % Dieletri strength: 1000 V Insultion resistne: > 10 4 MΩ ± 3 % - - ± 0. % - - Contt res. vrition: < 7 % Rn ± 3 % - Contt res. vrition: < 2 % Rn ± 2 % - - ± 0.1 % ± 0.2 % - ± 2 % - - ± 0.1 % - ΔV 1-2 /V 1-3 < ± 0.2 % Revision: 04-Jul-17 Doument Numer: 1034
6 ORDERING INFORMATION (prt numer) P 1 3 P A B M L B 1 7 E MODEL BUSHING SHAFT Ø L Old odes Ø L Only with ushing Old Shft odes T 6 8 T Q 7 8 Q AA 3 9. T, P K L V AB T, P, O L, M O 6 11 H AJ 3 22 T, P R P 6 8 TP EA 4 9. Q E N109. VP EB 412. Q F EJ 4 22 Q G FG 6 16 L AC FL 6 2 L AM FR 6 0 L AL FE 6 13 N AC FK 6 22 N AM FQ N AL OHMIC VALUE Liner lw from 22 Ω to 10 MΩ Logrithmi lw from 1 kω to 2.2. MΩ 103 = 10 kω TOLERANCE TAPER PACKAGING SPECIAL M = 20 % On request: K = 10 % A = liner L = lokwise logrithmi F = inverse lokwise logrithmi Bushing L or N: shft < 4 mm B10 = ox of 10 piees shft > 4 mm B08 = ox of 8 piees Other ushings: shft < 20 mm B17 = ox of 2 piees shft > 20 mm B12 = ox of 1 piees E = loting peg or speil ode given y Vishy PART NUMBER DESCRIPTION (for informtion only) T PE M 10K 20 % L BO e3 MODEL BUSHING SPECIAL SHAFT OHMIC VALUE TOL. TAPER SPECIAL PACKAGING SPECIAL SHAFT SPECIAL LEAD (P)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers nd Trimmers Guidelines for Resistive nd Indutive Components Revision: 04-Jul-17 6 Doument Numer: 1034
7 Legl Dislimer Notie Vishy Dislimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishy Intertehnology, In., its ffilites, gents, nd employees, nd ll persons ting on its or their ehlf (olletively, Vishy ), dislim ny nd ll liility for ny errors, inuries or inompleteness ontined in ny dtsheet or in ny other dislosure relting to ny produt. Vishy mkes no wrrnty, representtion or gurntee regrding the suitility of the produts for ny prtiulr purpose or the ontinuing prodution of ny produt. To the mximum extent permitted y pplile lw, Vishy dislims (i) ny nd ll liility rising out of the pplition or use of ny produt, (ii) ny nd ll liility, inluding without limittion speil, onsequentil or inidentl dmges, nd (iii) ny nd ll implied wrrnties, inluding wrrnties of fitness for prtiulr purpose, non-infringement nd merhntility. Sttements regrding the suitility of produts for ertin types of pplitions re sed on Vishy s knowledge of typil requirements tht re often pled on Vishy produts in generi pplitions. Suh sttements re not inding sttements out the suitility of produts for prtiulr pplition. It is the ustomer s responsiility to vlidte tht prtiulr produt with the properties desried in the produt speifition is suitle for use in prtiulr pplition. Prmeters provided in dtsheets nd / or speifitions my vry in different pplitions nd performne my vry over time. All operting prmeters, inluding typil prmeters, must e vlidted for eh ustomer pplition y the ustomer s tehnil experts. Produt speifitions do not expnd or otherwise modify Vishy s terms nd onditions of purhse, inluding ut not limited to the wrrnty expressed therein. Exept s expressly indited in writing, Vishy produts re not designed for use in medil, life-sving, or life-sustining pplitions or for ny other pplition in whih the filure of the Vishy produt ould result in personl injury or deth. Customers using or selling Vishy produts not expressly indited for use in suh pplitions do so t their own risk. Plese ontt uthorized Vishy personnel to otin written terms nd onditions regrding produts designed for suh pplitions. No liense, express or implied, y estoppel or otherwise, to ny intelletul property rights is grnted y this doument or y ny ondut of Vishy. Produt nmes nd mrkings noted herein my e trdemrks of their respetive owners VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Fe-17 1 Doument Numer: 91000
Multi-Turn Surface Mount 1/4" Square Cermet Trimmers, Fully Sealed
www.vishy.om Vishy Sfernie Multi-Turn Surfe Mount /4" Squre Cermet Trimmers, Fully Seled The multiturn trimmer hs een designed for use in PCB surfe mounting pplitions. Three vritions re ville ording to
More information3/8" Square (10 mm) Multi-Turn Cermet Trimmer
www.vishy.om 3/8" Squre ( mm) Multi-Turn Cermet Trimmer FEATURES Industril grde W t 70 C Vishy Spetrol Tests ording to CECC 400 or IEC 60393-1 Contt resistne vrition < 2 % Mteril tegoriztion: for definitions
More information3/8" Square (10 mm) Multi-Turn Cermet Trimmer
3/8" Squre ( mm) Multi-Turn Cermet FEATURES Industril grde W t 70 C Tests ording to CECC 400 or IEC 60393-1 Contt resistne vrition < 1 % typil Complint to RoHS Diretive 2002/95/EC The Model is smll size
More information5 mm Square Surface Mount Miniature Trimmers Single-Turn Cermet Fully Sealed
www.vishy.om Vishy Sfernie mm Squre Surfe Mount Miniture Trimmers Single-Turn Cermet Fully Seled The trimming potentiometer hs een designed for surfe mount pplitions nd offers volumetri effiieny ( mm x
More informationSurface Mount Miniature Trimmers Single-Turn Cermet Sealed
The trimming potentiometer hs een designed for surfe mount pplitions nd offers volumetri effiieny ( x x.7 mm) with high performne nd stility. The design is suitle for oth mnul or utomti opertion, nd n
More information3/8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed
P0 /8" Square Panel Potentiometer Miniature - Cermet - Fully Sealed P0 panel potentiometer combines the very good setting stability offered by trimmers (due to their proprietary multifinger wiper), with
More informationThick Film Chip Resistor Array
STANDARD ELECTRICAL SPECIFICATIONS CRA12E CRA12S Thick Film Chip Resistor Arry POER RATING P 70 C LIMITING ELEMENT VOLTAGE MAX. V FETAURES Convex terminl rry vilble with either sclloped corners (E version)
More informationVishay Dale Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount FEATURES RESISTANCE RANGE 18546
RH, NH FETURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 vailable in non-inductive styles (type NH) with ryton- Perry
More information5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed
5 mm Square Surface Mount Miniature Trimmers Multi-Turn Cermet Sealed DESIGN SUPPORT TOOLS Models Available click logo to get started FEATURES 0.5 W at 70 C Professional and industrial grade Wide ohmic
More informationHigh Voltage, Input Rectifier Diode, 20 A
VS-ETS..-M3, VS-TS..-M3 High Voltage, Input Retifier Diode, 3 L TO-C Base athode 3 Cathode node VS-ETS.. 3 PRIMRY CHRCTERISTICS 3L TO-B Cathode to base 3 node node VS-TS.. I F(V) V R 8 V, V V F at I F.
More informationThick Film Resistor Array
, CRA12S Thick Film Resistor Arry STANDARD ELECTRICAL SPECIFICATIONS CRA12S POER RATING P 70 C LIMITING ELEMENT VOLTAGE MAX. V FEATURES Convex terminl rry vilble with either sclloped corners (E version)
More informationTolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog. (See note 10) Others tapers on request
Bushless version P- FETURES mm arbon Potentiometer arbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to ) Self extinguishable material U -V0 Upon request: Metalic support
More informationTolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog. (See note 10) Others tapers on request
Bushless version P- FETURES mm arbon Potentiometer arbon resistive element Dust proof enclosure Polyester substrate Modular gang type (up to ) Self extinguishable material U -V0 Upon request: Metalic support
More informationT-21 FEATURES. Taper. A= linear B= Log. C= Alog. (See note 10) Other tapers on request. Value. (See note 4)
T- FETURES mm arbon Potentiometer arbon resistive element. High mechanical endurance. Upon request: Detents Stereo matching Switch MEHNI SPEIFITIONS Mechanical rotation angle: ± Electrical rotation angle:
More informationTable of Content. c 1 / 5
Tehnil Informtion - t nd t Temperture for Controlger 03-2018 en Tble of Content Introdution....................................................................... 2 Definitions for t nd t..............................................................
More informationUltrafast Rectifier, 2 x 15 A FRED Pt
Ultrafast Rectifier, x 5 FRED Pt ommon cathode, Base FETURES Ultrafast recovery time Low forward voltage drop 75 operating junction temperature 3 TO-47 3L node 3 node Low leakage current Designed and qualified
More informationA = Lin. B = Log. C = Alog. Tolerance 3030 = ± 30% 2020 = ± 20% 1010 = ± 10% 0505 = ± 5% (See note 2) Example: +17% -15%
PSC-0 MIN FETURES 0mm SMD cermet Potentiometer Specifically designed for leadfree reflow soldering processes (excellent performance). Cermet resistive element. IP4 protection according to IEC 609. Plastic
More informationMC14001UB, MC14011UB. UB-Suffix Series CMOS Gates
MC4UB, MC4UB UB-Suffix Series CMOS Gtes The UB Series logi gtes re onstruted with P nd N hnnel enhnement mode devies in single monolithi struture (Complementry MOS). Their primry use is where low power
More informationUltrafast Rectifier, 2 x 30 A FRED Pt
Ultrafast Rectifier, x 30 FRED Pt TO-47 PRODUT SUMMRY node Base common cathode 3 ommon cathode node Package TO-47 I F(V) x 30 V R 400 V V F at I F 0.9 V t rr typ. 37 ns T J max. 75 Diode variation ommon
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
Ultrafast Soft Recovery Diode, 60 FRED Pt FETURES Ultrafast recovery time 3 2 TO-247D 2L athode to base 2 3 athode node Low forward voltage drop 75 operating junction temperature Designed and qualified
More information30 W Power Resistor Thick Film Technology
30 W Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages.
More informationVS-5EWL06FN-M3. Ultralow V F Ultrafast Rectifier, 5 A FRED Pt. Vishay Semiconductors. FEATURES DESCRIPTION / APPLICATIONS
Ultralow V F Ultrafast Rectifier, 5 FRED Pt FETURES TO-252 (D-PK) N/ 2, 4 3 node Ultrafast recovery time, extremely low V F and soft recovery 75 maximum operating junction temperature For PF DM operation
More informationHyper Fast Rectifier, 8 A FRED Pt
Hyper Fast Rectifier, 8 FRED Pt 2 3 DPK (TO-252) N/ 2, 3 node PRIMRY HRTERISTIS Package DPK (TO-252) I F(V) 8 V R 600 V V F at I F.3 V t rr (typ.) 8 ns T J max. 75 ircuit configuration Single die FETURES
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C case temperature heatsink mounted Direct mounting ceramic on heatsink Broad resistance range: 0.010
More informationSEMICONDUCTOR TECHNICAL DATA
SEMIONDUTOR TEHNIL DT The M4U multi purpose devie oists of three N hnnel nd three P hnnel enhnement mode devies pkged to provide ess to eh devie. These verstile prts re useful in inverter iruits, pulse
More informationES-TA-3..1 Six- and Ten-Input E-Stop Safety Modules with DeviceNet
Emergeny Stop Sfety Moules Moel Seletion ES-TA-3..1 Six- n Ten-Input E-Stop Sfety Moules with DevieNet Sfety Moules s up to ten normlly lose emergeny stop swith iruits for ontt filure or wiring fult Diverse-reunnt
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS click logo to get started FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High
More informationPower Resistors for Mounting Onto a Heatsink Thick Film Technology
Power Resistors for Mounting Onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 1% tolerance available High power rating = 200 W Wide ohmic value range = 0.046
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors The performance of the resistors exceed the requirements of NF C 83230 standards. They are particularly
More informationMC14000UB SEMICONDUCTOR TECHNICAL DATA
SEIONDUTOR TEHNIAL DATA The UB dul input NOR gte plus inverter is otruted with OS P hnnel nd N hnnel enhnement mode devies in single monolithi struture. These omplementry OS logi gtes find primry use where
More informationFEATURES. Tolerance. Value 2020 = +/- 20% 3030 = +/- 30% (See note 5) (See note 4) Taper. A = Linear B = Log. C = Alog.
Bushless version MHNIL SPIFITIONS Mechanical rotation angle: 300 ± lectrical rotation angle: ± Torque: 0. to. Ncm. (0.7 to 2. in-oz) Stop torque: > 0 Ncm. ( > in-oz) Max. torque nut (binding out): < 0
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink FEATURES 1 % tolerance available High power rating = 200 W Wide ohmic value range = 0.046 Ωto 1 MΩ Non inductive Easy mounting Low thermal radiation of the case
More informationSmall Signal Schottky Diode FlipKY Gen 2
Small Signal Schottky Diode FlipKY Gen 2 MECHNICL DT Case: CLP0603-2M X FETURES Schottky diode for high-speed switching Very low dimensions: 0.6 mm x 0.3 mm x 0.29 mm 0.2 forward current Low forward voltage
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationFilter Inductors, High Current, Radial Leaded
Filter Inductors, High Current, Radial Leaded ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Dielectric: 2500 V RMS between winding and 0.250" [6.35 mm] of insulating covering
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 Ω to 900 kω E24 series Non inductive
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationTeSys contactors. TeSys F contactors. b1 =
Dimensions TeSys onttors TeSys F onttors LC F to F0 () S S X X L Q P P Q fm Z Y J J X (mm) Minimum eletril lerne ording to operting voltge nd reking pity. LC 00 00 V 00 000 V F, F0 0 F 0 F, F 0 F0 0 ()
More informationFEATURES. Detents. Life PAI PAM PAF P1I P1F P02.. E= Long life U= Extra Long life. (See note 5) P38. Cut track. PCI = Initial PCF= Final
MEHNI SPEIFITIONS Mechanical rotation angle: 2 ± 20º ± º available under drawing (blue housing only) Electrical rotation angle: 20 ± 20 Torque: 0. to 2. Ncm. (0. to 3. in-oz) Stop torque: > Ncm. ( >1 in-oz)
More informationSurface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started Models Available FEATURES AEC-Q200 qualified 35 W at 25 C case temperature Surface mounted resistor - TO-263
More informationDirect Water Cooled Wirewound Resistor
Direct Water Cooled Wirewound Resistor FEATURES Direct cooling without heatsink Excellent power / volume ratio Multi resistive element option Material categorization: for definitions of compliance please
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
More informationHyperfast Rectifier, 30 A FRED Pt
VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 Hyperfast Rectifier, 30 FRE Pt FETURES Low forward voltage drop Hyperfast soft recovery time 75 operating junction temperature TO-247 Base cathode
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1 W Wide resistance range: 1 Ω to 1.3 kω E24 series Non inductive Easy mounting Low
More informationUltrafast Rectifier, 8 A FRED Pt
Ultrafast Rectifier, 8 FRED Pt 2L TO-220C Base cathode 2 2L TO-220 FULL-PK FETURES State of the art low forward voltage drop Ultrafast recovery time 75 C operating junction temperature Low leakage current
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
VS-60EPU06PbF, VS-60EPU06-N3, VS-60PU06PbF, VS-60PU06-N3 Ultrafast Soft Recovery iode, 60 FRE Pt TO-247 modified athode to base 2 1 3 athode node VS-60EPU06PbF VS-60EPU06-N3 PROUT SUMMRY TO-247 athode
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
VS-60EPU02PbF, VS-60EPU02-N3, VS-60PU02PbF, VS-60PU02-N3 Ultrafast Soft Recovery iode, 60 FRE Pt FETURES Ultrafast recovery time TO-247 modified Base common cathode 2 TO-247 Base common cathode 2 Low forward
More information8-Channel, Dual 4-Channel, Triple 2-Channel Multiplexers
8-hannel, Dual 4-hannel, Triple 2-hannel Multiplexers DESRIPTION The DG92, DG922, and DG923 are high precision single and dual supply MOS analog multiplexers. DG92 is an 8-channel multiplexer, the DG922
More informationConductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
More informationLead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Free Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Pure tin plating provides compatibility with lead
More informationAluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for 00 h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More informationTELUX LED FEATURES APPLICATIONS WAVELENGTH
TELUX LED DESCRIPTION 19232 The is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing highly developed
More informationLead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor
Lead (Pb)-Bearing Thick Film, Rectangular High Value Chip Resistor FEATURES High resistance values (up to 470M) Suitable for voltage dividers and hybrids Lead (Pb)-bearing termination plating on Ni barrier
More informationMCC BC856A THRU BC858C. Features. PNP Small Signal Transistor. Mechanical Data SOT-23
M Micro ommercil omponents Fetures Idelly Suited for Automtic Insertion 150 o Junction Temperture For Switching nd AF Amplifier Applictions Hlogen free vilble upon request by dding suffix "-HF" Mechnicl
More informationCarbon Film Resistors, Standard
LCA... STANDARD ELECTRICAL SPECIFICATIONS FEATURES Securely bonded carbon film Good moisture resistance (ΔR max ±.5 % R) Good long term stability (ΔR max ±.5 % R, for h) Lead (Pb)-free solder contacts
More informationStandard Carbon Film Leaded Resistors
Standard Carbon Film Leaded Resistors FEATURES Securely bonded carbon film Good moisture resistance ( R max. ±.5 % R) Good long term stability ( R max. ±.5 % R, for h) Low noise (refer to graph) Suitable
More informationSTPSC16H065A. 650 V power Schottky silicon carbide rectifier. Datasheet. Features. Applications. Description
Dtsheet 65 V power Schottky silicon crbide rectifier NC A TO-247 K A K NC Fetures No or negligible reverse recovery Temperture independent switching behvior High forwrd surge cpbility Operting T j from
More informationFEATURES DESCRIPTION APPLICATIONS
Ultralow V F Hyperfast Rectifier for Discontinuous Mode PFC, 5 FRED Pt 3 2L TO-22C 2 FETURES Hyperfast recovery time Benchmark ultralow forward voltage drop 75 C operating junction temperature Low leakage
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationVS-HFA08SD60SPbF. HEXFRED Ultrafast Soft Recovery Diode, 8 A. Vishay Semiconductors. FEATURES BENEFITS PRODUCT SUMMARY
HEXFRED Ultrafast Soft Recovery Diode, 8 2, 4 FETURES Ultrafast recovery time Ultrasoft recovery Very low I RRM 3 TO-252 (D-PK) N/C node PRODUCT SUMMRY Package TO-252 (D-PK) I F(V) 8 V R 600 V V F at I
More informationAluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
More informationGreen Thick Film Chip Resistors
Green Thick Film Chip Resistors FEATURES Green resistor - does not use RoHS exemptions Stability R/R = 1 % for 1000 h at 70 C 2 mm pitch packaging option for 0603 size Material categorization: for definitions
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
More informationFusible Carbon Film MELF Resistors
Fusible Carbon Film MELF Resistors FEATURES Fusible resistor for constant voltage designed for overload protection Special trimming to provide the fusing characteristic Flame retardant coating Pure tin
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationHyperfast Rectifier, 2 x 15 A FRED Pt
Hyperfast Rectifier, 2 x 5 FRED Pt 3L TO-220B PRIMRY CHRCTERISTICS Base common cathode 2 2 Common node cathode node 3 Package 3L TO-220B I F(V) 2 x 5 V R 300 V V F at I F 0.85 V t rr typ. See Recovery
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
More informationAluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More information2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design
VBUS5M2-HT1 2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD-Protection Diode - Flow Through Design 1 22814 3 MRKING (example only) Bar = cathode marking X = date code Y = type code (see
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES LPS high power: 1100 W Wide resistance range: 1 to 1.3 k E24 series Non inductive Easy mounting Low thermal radiation of the case
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationLife. E= 10K cycles. (See note3) Tolerance = + 30% 2020 = + 20% 1010 = + 10% 0505 = + 5% (See note 2)
MHNIL PIFITION Mechanical life*: Up to 10k cycles. Mechanical rotation angle: 2 ± lectrical rotation angle: 240 ± 20 Torque: 0. to 2. Ncm. (0.7 to 3.4 in-oz) top torque: > 10 Ncm. ( >14 in-oz) HOW TO ORDR
More informationCeramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose
D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC
More informationDouble Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor
End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please
More informationAluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
More informationLead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors
Lead (Pb)-Free Thick Film, Rectangular, Trimmable Chip Resistors STANDARD ELECTRICAL SPECIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE Umax. AC RMS /DC V
More informationAluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
More informationAluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
VS-60EPU04PbF, VS-60EPU04-N3, VS-60PU04PbF, Ultrafast Soft Recovery iode, 60 FRE Pt FETURES Ultrafast recovery time Low forward voltage drop 175 operating junction temperature TO-247 modified TO-247 esigned
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationLong Side Termination Thick Film Chip Resistors
FEATURES Enhanced power rating Long side terminations Protective overglaze Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes
More informationPower Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
More informationAC and Pulse Film/Foil Capacitors Radial Potted Type
KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current
More informationAluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
More informationCeramic Disc Capacitors Class 1, 3 kv DC
S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
More informationUltrafast Rectifier, 2 x 15 A FRED Pt
Ultrafast Rectifier, x 5 FRED Pt TO-47C PRODUCT SUMMRY 3 node Base common cathode 3 Common cathode node Package TO-47C I F(V) x 5 V R 00 V V F at I F 0.85 V t rr typ. See Recovery table T J max. 75 C Diode
More informationConformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks
Conformal Coating, Single-In-Line Thin Film Resistor, Through Hole Networks Actual Size These networks are designed to be used in analog circuits in conjunction with operational amplifiers. In addition
More informationAluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
More informationAluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
More informationMIL-PRF-39035, Char. H with a Smooth and Unidirectional Output
Accutrim 240 (RJ26 Style) Bulk Metal Foil Technology Ultra High Precision Trimming Potentiometers, / 4 " Square, RJ26 Style, Designed to Meet or Exceed The Requirements of MIL-PRF-905, Char. H with a Smooth
More informationRF Power Plate Capacitors for Higher Voltages, Class 1 Ceramic
RF Power Plate Capacitors for Higher Voltages, Class Ceramic FEATURES Low losses High reliability High voltage ratings APPLICATIONS These high quality power plate capacitors are designed for usage in high
More informationAluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
More informationSolid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
More information