GMV95/GCV9 PRODUCT SPECIFICATIONS 95%/93% AFUE GAS FURNACE MULTI-POSITION, TWO-STAGE/VARIABLE-SPEED HEATING INPUT: 46, ,000 BTU/H

Size: px

Start display at page:

Download "GMV95/GCV9 PRODUCT SPECIFICATIONS 95%/93% AFUE GAS FURNACE MULTI-POSITION, TWO-STAGE/VARIABLE-SPEED HEATING INPUT: 46, ,000 BTU/H"

Jessie Atkinson
5 years ago
Views:

GMV95/GV9 GS FURNE PROUT SPEIFITIONS The Goodman GMV95/GV9 95%/93% FUE Two-Stage, Variable-Speed Gas Furnaces feature a patented aluminizedsteel tubular heat exchanger and durable Silicon Nitride Hot

1 GMV95/GV9 GS FURNE PROUT SPEIFITIONS The Goodman GMV95/GV9 95%/93% FUE Two-Stage, Variable-Speed Gas Furnaces feature a patented aluminizedsteel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. 95%/93% FUE MULTI-POSITION, TWO-STGE/VRILE-SPEE HETING INPUT: 46,000 5,000 TU/H Standard Features Patented TuffTube dual-diameter tubular heat exchanger with lifetime limited warranty plus 0-year limited furnace replacement warranty Two-stage gas valve operates on two-stage or singlestage thermostats Super-efficient, ultra-quiet variable-speed circulator motor gently ramps up or down according to heating or cooling demand Silicon Nitride igniter with patented adaptive learning control for maximum igniter life Furnace control board with self-diagnostics, color-coded lowvoltage terminals, and provisions for electronic air cleaner and 0-volt or 4-volt humidifiers Extra-low constant fan allows homeowner to activate very low speed to efficiently circulate air throughout the home. This setting costs as little as a 75-watt light bulb to operate. ual-certified for sealed combustion direct vent (-pipe) or non-direct vent (-pipe) applications Quiet two-speed induced draft blower ll models comply with alifornia NOx emissions standards abinet Features Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish Foil-faced insulation lines the heat exchanger Easy-to-install top venting is standard; alternate flue/vent located on the right (GMV95) esigned for multi-position installation GMV95: upflow, horizontal left or right; GV9: downflow, horizontal left or right irtight solid bottom for side return applications and easy-cut tabs for effortless removal in bottom air inlet applications onvenient left or right connection for gas and electric service oil and furnace fit flush for most installations ontents Nomenclature... Product Specifications...3 imensions...4 lower Performance Specifications...7 Wiring iagrams...3 ccessories...5 SS-GMV95 6/08 Supersedes /08

2 PROUT SPEIFITIONS NOMENLTURE G M V X 3 4,5 6,7,8 9 0 rand Revisions G Goodman rand Initial Release or istinctions st Revision nd Revision irflow irection ownflow/horizontal edicated ownflow NOx H High irflow N Natural Gas K edicated Upflow X Low NOx M Upflow/Horizontal abinet Width escription 4 V Two-Stage/Variable-speed 7½ H Two-Stage/Multi-speed S Single-Stage/Multi-speed 4½ E Two-Stage/X-3 Motor FUE Maximum 0.5 ESP 95 95% 3, %+ 4, % 5,000 MTU/h 045: 45,000 5: 5, : 70,000 40: 40, : 90,000 SS-GMV95

3 PROUT SPEIFITIONS SPEIFITIONS GMV X GMV X GMV X GMV95-55X GV9 0704X GV9 0905X GV9 55X Heating apacity High Fire Input¹ 46,000 69,000 9,000 5,000 69,000 9,000 5,000 High Fire Output¹ 45,000 67,000 90,000 09,000 65,000 87,000 09,000 Low Fire Input¹ 3,000 48,000 64,000 80,000 48,000 64,000 80,000 Low Fire Output¹ 30,800 46,400 6,700 77,400 45,000 60,00 77,400 FUE² ESP Temperature Rise Range ( F) irculator lower Size ( x W) 0 X 7 0 X 0 X 0 X 0 0 x 0 X 0 X RPM ½ ¾ ¾ Speed Variable Variable Vent iameter³ No. of urners Filter Size (in²) isposable Permanent Electrical ata Min. ircuit mpacity (amps) Max. Overcurrent Protection 5 5 amps 5 amps 5 amps 5 amps 5 amps 5 amps 5 amps Ship Weight (lbs) Natural Gas TU/h OE FUE based upon Isolated ombustion System (IS) Installer must supply one or two PV pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must be either or 3 in diameter, depending upon furnace input, number of elbows, length of run and installation ( or pipes). The optional ombustion ir Pipe is dependent on installation/code requirements and must be or 3 diameter PV. Minimum ircuit mpacity = (.5 x irculator lower mps) + I lower amps. Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. Maximum Overcurrent Protection evice refers to maximum recommended fuse or circuit breaker size. May use fuses or HR-type circuit breakers of the same size as noted. ll furnaces are manufactured for use on 5 V, 60 Hz, single-phase electrical supply. Gas Service onnection ½ FPT Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical ode and/or all existing local codes. SS-GMV95 3

PROUT SPEIFITIONS GMV95 IMENSIONS Model E GMV950453X 7½ 6 3⅛ ⅛ 3⅝ GMV950704X 9½ 6⅛ 6 7½ GMV950905X 4½ 3 0⅝ 9⅜ 0⅞ GMV9555X 4½ 3 0⅝ 9⅜ 0⅞ Installer must supply one or two PV pipes: one for combustion

4 PROUT SPEIFITIONS GMV95 IMENSIONS Model E GMV950453X 7½ 6 3⅛ ⅛ 3⅝ GMV950704X 9½ 6⅛ 6 7½ GMV950905X 4½ 3 0⅝ 9⅜ 0⅞ GMV9555X 4½ 3 0⅝ 9⅜ 0⅞ Installer must supply one or two PV pipes: one for combustion air (optional) and one for the fl ue outlet (required). Vent pipe must be either or 3 in diameter, depending upon furnace input, number of elbows, length of run and installation ( or pipes). The optional ombustion ir Pipe is dependent on installation/code requirements and must be or 3 diameter PV. Line voltage wiring can enter through the right or left side of the furnace. Low-voltage wiring can enter through the right or left side of furnace. onversion kits for high-altitude natural gas operation are available. ontact your Goodman distributor or dealer for details. Installer must supply following gas line fi ttings, according to which entrance is used: Left Two 90º elbows, one close nipple, straight pipe Right Straight pipe to reach gas valve For bottom return: Failure to unfold fl anges may reduce airfl ow by up to 8%. This could result in performance and noise issues. MINIMUM LERNES TO OMUSTILE MTERILS Position Sides Rear Front ottom Flue Top Upfl ow Horizontal = If placed on combustible fl oor, the fl oor MUST be wood ONLY. For servicing or cleaning, a 4 front clearance is required. Unit connections (electrical, fl ue and drain) may necessitate greater clearances than the minimum clearances listed above. In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater. 4 SS-GMV95

5 PROUT SPEIFITIONS GV9 IMENSIONS FOLE FLNGES UNFOLE FLNGES FOLE FLNGES UNFOLE FLNGES Model E GV90704X 9½ 6⅛ 8 9½ GV90905X 4½ 3 0⅝ ½ 3 GV955X 4½ 3 0⅝ ½ 3 Installer must supply one or two PV pipes: one for combustion air (optional) and one for the fl ue outlet (required). Vent pipe must be either or 3 in diameter, depending upon furnace input, number of elbows, length of run, and installation ( or pipes). The optional ombustion ir Pipe is dependent on installation/code requirements and must be or 3 diameter PV. Line voltage wiring can enter through the right or left side of the furnace. Low-voltage wiring can enter through the right or left side of furnace. onversion kits for high-altitude natural gas operation are available. ontact your Goodman distributor or dealer for details. Installer must supply following gas line fi ttings, according to which entrance is used: Left Two 90º Elbows, one close nipple, straight pipe Right Straight pipe to reach gas valve For bottom return: Failure to unfold fl anges may reduce airfl ow by up to 8%. This could result in performance and noise issues. MINIMUM LERNES TO OMUSTILE MTERILS Position Sides Rear Front ottom Flue Top ownflow N 0 Horizontal = If placed on combustible fl oor, the fl oor MUST be wood ONLY. N = For installation on non-combustible fl oors only. combustible floor sub-base must be used for installations on combustible fl ooring. For servicing or cleaning, a 4 front clearance is required. Unit connections (electrical, fl ue and drain) may necessitate greater clearances than the minimum clearances listed above. In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater. SS-GMV95 5

6 PROUT SPEIFITIONS GMV95 HIGH- OR SINGLE-STGE OOLING SPEES GMV950453X GMV950704X GMV950905X GMV9555X ooling Speed FM¹ ooling Speed FM¹ ooling Speed FM¹ ooling Speed Minus (-) 540 Minus (-) 540 Minus (-) 70 Minus (-) 70 Normal 600 Normal 600 Normal 800 Normal 800 Plus (+) 660 Plus (+) 660 Plus (+) 880 Plus (+) 880 Minus (-) 70 Minus (-) 70 Minus (-) 990 Minus (-) 990 Normal 800 Normal 800 Normal,00 Normal,00 Plus (+) 880 Plus (+) 880 Plus (+),0 Plus (+),0 Minus (-) 900 Minus (-) 990 Minus (-),60 Minus (-),60 Normal,000 Normal,00 Normal,400 Normal,400 Plus (+),00 Plus (+),0 Plus (+),540 Plus (+),540 Minus (-),080 Minus (-),86 Minus (-),60 Minus (-),60 Normal,00 Normal,49 Normal,800 Normal,800 Plus (+),30 Plus (+),57 Plus (+),980 Plus (+),980 to.8 W.. ESP ll furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 400 FM per ton when cooling is desirable. o not operate above.5 w.c. ESP in heating mode. Operating FM between.5 and.8 w.c. is tabulated for cooling purposes only. onstant Fan mode is 50% of above values FM¹ GMV95 LOW-STGE OOLING SPEES ooling Speed GMV950453X GMV950704X GMV950905X GMV9555X FM¹ ooling Speed FM¹ ooling Speed FM¹ ooling Speed Minus (-) 380* Minus (-) 378* Minus (-) 53* Minus (-) 54* Normal 390 Normal 390 Normal 50 Normal 50 Plus (+) 49 Plus (+) 49 Plus (+) 57 Plus (+) 57 Minus (-) 468 Minus (-) 468 Minus (-) 644 Minus (-) 644 Normal 50 Normal 50 Normal 75 Normal 75 Plus (+) 57 Plus (+) 57 Plus (+) 787 Plus (+) 787 Minus (-) 585 Minus (-) 644 Minus (-) 89 Minus (-) 89 Normal 650 Normal 75 Normal 90 Normal 90 Plus (+) 75 Plus (+) 787 Plus (+),00 Plus (+),00 Minus (-) 70 Minus (-) 836 Minus (-),053 Minus (-),053 Normal 780 Normal 99 Normal,70 Normal,70 Plus (+) 858 Plus (+),0 Plus (+),87 Plus (+),87 to.8 W.. ESP ll furnaces ship as high speed for cooling. Installer must adjust blower speed as needed. For most jobs, about 400 FM per ton when cooling is desirable. o not operate above.5 w.c. ESP in heating mode. Operating FM between.5 and.8 w.c. is tabulated for cooling purposes only. FM¹ 6 SS-GMV95

7 PROUT SPEIFITIONS GMV95 HETING SPEES Heating Speed GMV950453X (Rise Range: F) Low Stage to.5 W.. ESP High Stage to.5 W.. ESP Rise ( F) Heating Speed GMV950704X (Rise Range: F) Low Stage to.5 W.. ESP High Stage to.5 W.. ESP Minus (-) Minus (-) 756, Normal Normal 840,0 50 Plus (+) Plus (+) 94,33 46 Minus (-) Minus (-) 88,9 5 Normal Normal 90,35 46 Plus (+) Plus (+),0,457 4 Minus (-) Minus (-) 900,96 47 Normal Normal,000,440 4 Plus (+) 75, Plus (+),00, Minus (-) Minus (-) 97, Normal 700, Normal,080, Plus (+) 770,09 36 Plus (+),88,7 35 Rise ( F) Heating Speed GMV950905X (Rise Range: F) Low Stage to.5 W.. ESP High Stage to.5 W.. ESP Rise ( F) Heating Speed GMV9555X (Rise Range: F) Low Stage to.5 W.. ESP High Stage to.5 W.. ESP Minus (-),03, Minus (-),07, Normal,5,60 50 Normal,30,77 57 Plus (+),38,78 45 Plus (+),353,948 5 Minus (-),076,549 5 Minus (-),39,639 6 Normal,95,7 47 Normal,65,8 56 Plus (+),35, Plus (+),39, Minus (-),39, Minus (-),70, Normal,65,8 44 Normal,300,87 54 Plus (+),39, Plus (+),430, Minus (-),0, Minus (-),0, Normal,335,9 4 Normal,335,9 53 Plus (+),469,5 38 Plus (+),469,5 48 Rise ( F) SS-GMV95 7

8 PROUT SPEIFITIONS GMV95 LOWER PERFORMNE 8 SS-GMV95

9 PROUT SPEIFITIONS GV9 OOLING SPEES HIGH- /SINGLE-STGE & LOW-STGE OOLING SPEES ooling Speed * Motor FM maximum ooling Speed GV90704X FM at. to.8 w.c. ESP High/Single- Low Stage Stage Minus (-) 378* 540 Normal Plus(+) Minus (-) Normal Plus(+) Minus (-) Normal 75,00 Plus(+) 787,0 Minus (-) 836,86 Normal 99,49 Plus(+),0,57 GV955X FM at. to.8 w.c. ESP High/Single- Low Stage Stage Minus (-) 500* 705 Normal Plus(+) Minus (-) 6 98 Normal 690,09 Plus(+) 759,00 Minus (-) 85,65 Normal 906,406 Plus(+) 997,547 Minus (-),049,68 Normal,65,809 Plus(+),8,990 ooling Speed * Motor FM maximum GV90905X FM at. to.8 w.c. ESP High/Single- Low Stage Stage Minus (-) 53* 70 Normal Plus(+) Minus (-) Normal 75,00 Plus(+) 787,0 Minus (-) 89,60 Normal 90,400 Plus(+),00,540 Minus (-),053,60 Normal,70,800 Plus(+),87,980 * Motor FM maximum These charts are for furnaces installed at feet. t higher altitudes, a properly derated unit will have the same temperature rise at a particular FM, while the ESP at that FM will be lower. The installation must be adjusted to obtain a temperature rise within the range listed on the furnace nameplate. o not operate above.5 w.c. ESP in heating mode. Propane gas installations will have a High Stage rise approximately 4 lower than shown in above table. SS-GMV95 9

10 PROUT SPEIFITIONS GV9 OOLING SPEES (ONT.) OOLING-SE ONTINUOUS FN SPEES ooling Speed GV90704X GV90905X GV955X * Motor FM maximum ontinuous Fan Speed FM Minus (-) 380* ontinuous ooling Speed Fan Speed FM Minus (-) 53* ontinuous ooling Speed Fan Speed FM Minus (-) 500* Normal 380* Normal 53* Normal 500* Plus(+) 380* Plus(+) 53* Plus(+) 500* Minus (-) 403 Minus (-) 554 Minus (-) 550 Normal 448 Normal 66 Normal 6 Plus(+) 493 Plus(+) 678 Plus(+) 67 Minus (-) 554 Minus (-) 706 Minus (-) 709 Normal 66 Normal 784 Normal 787 Plus(+) 678 Plus(+) 86 Plus(+) 866 Minus (-) 70 Minus (-) 907 Minus (-) 9 Normal 800 Normal,008 Normal,03 Plus(+) 880 Plus(+),09 Plus(+),4 UTO-OMFORT MOE uring uto-omfort mode, the furnace ramps up to 50% of the demand for half a minute. It then ramps to 8% of the full cooling demand airflow and operates there for approximately 7½ minutes. The motor then steps up to the full demand airflow. This mode spends a half minute at 50% airflow STNR LTITUE INSTLLTIONS Gas ltitude Kit Orifice Manifold Pressure High Stage Low Stage Pressure Switch hange Natural hangeover None # W...9 W.. None Propane LPM-03 & LPM-05 #55 0.0: W W.. None For installation in anada, gas furnaces are certifi ed only to 4,500 ft. For GV installations above 7,000 ft., please refer to your Goodman distributor for required kit(s). 0 SS-GMV95

11 PROUT SPEIFITIONS GV9 HETING SPEES GV90704X (Rise Range: F) Heating Speed Low-Stage FM High-Stage FM Rise Heating Speed Minus (-) 747, Normal 830,95 50 Plus(+) 93,35 46 Minus (-) 84,86 5 Normal 95,38 46 Plus(+),007,449 4 Minus (-) 900,96 47 Normal,000,440 4 Plus(+),00, Minus (-) 978, Normal,085,56 39 Plus(+),94,79 35 GV955X (Rise Range: F) Low-Stage FM High-Stage FM Rise Heating Speed GV90905X (Rise Range: F) Low-Stage FM High-Stage FM Rise Minus (-) 999, Normal,0, Plus(+),, Minus (-),067,536 5 Normal,85, Plus(+),303, Minus (-),34, Normal,60,84 44 Plus(+),386, Minus (-),0, Normal,335,9 4 Plus(+),469,5 38 Minus (-),093, Normal,4, Plus(+),335,935 5 Minus (-),06,6 6 Normal,9,79 55 Plus(+),35, Minus (-),66, Normal,96, Plus(+),46,0 49 Minus (-),7, Normal,30, Plus(+),43, These charts are for furnaces installed at feet. t higher altitudes, a properly derated unit will have the same temperature rise at a particular FM, while the ESP at that FM will be lower. The installation must be adjusted to obtain a temperature rise within the range listed on the furnace nameplate. o not operate above.5 w.c. ESP in heating mode. Propane gas installations will have a High Stage rise approximately 4 lower than shown in above table. SS-GMV95

12 PROUT SPEIFITIONS GV9 LOWER PERFORMNE SS-GMV95

13 Y PROUT SPEIFITIONS GMV95/ GV9 WIRING IGRM R R HOT SURFE IGNITER TWO-STGE INTEGRTE ONTROL MOULE 6 WIRE EM MTR HRNESS IRUIT ONNETOR HI TWO STGE GS VLVE PM MNUL RESET ROLLOUT LIMIT ONTROLS (SINGLE ONTROL ON 45 ktu) R U R R UTO RESET PRIMRY LIMIT ONTROL 3 URNER OMPRTMENT LOWER OMPRTMENT FUSE LO HET 4 V 3 0 IRULTOR LOWER MNUL RESET UXILIRY LIMIT ONTROL VT GY FRONT OVER PRESSURE SWITH PK OR HIGH FIRE PRESS. SWITH NO VT INUE RFT LOWER GN 4VTHERMOSTT ONNETIONS HOT R OR R U VT YL GN OR T-STT SELETOR HET OFF ELY IP SWITHES R R IGNOSTI LE HI HET E OOL PRK O YLO LINE GN PK PK GY XFMR / HUM G GY R VT YL U INUTOR OIL 70kTU,90kTU, 5kTU MOELS ONLY GY NEUTRL OR 4V HUM. GN W W I LOWER TWO-STGE PRESSURE SWITH SSEMLY TWIN/ EHUM NO LOW FIRE PRESS. SWITH 5 IRUIT ONNNETOR OR NO PK 40 V TRNS- FORMER U GY PK VT 4V HUM. R GY VT 4 V 5 V YL YL FLME SENSOR U VT JUNTION OX GN 9 IRUIT ONNETOR HSSIS GROUN LOWER OMPRTMENT OOR SWITH (OPEN EN OOR OPEN) - -5 ISONNET POWER MUST E PROPERLY EFORE SERVIING. WIRING TO UNIT POLRIZE N GROUNE. INTEGRTE ONTROL MOULE 4V THERMOSTT ONNETIONS 4V HUMIIFIER R W YLO W Y G ISONNET 5 V/ Ø /60 HZ POWER SUPPLY WITH PROTETION EVIE OVERURRENT WRNING:ISONNET PROPERLY POLRIZE SERVIING. WIRING TO UNIT MUST E N GROUNE. POWER EFORE TO 5V/ Ø /60 HZ POWER SUPPLY WITH OVERURRENT PROTETION EVIE WRNING: OOR SWITH 5kTU MOELS INUTOR OIL 70kTU,90kTU, ONLY FUSE 3 TO MIRO TH (5) HLO () HL (6) PS () MVL(7) PS () GN (0) TR (9) INTEGRTE ONTROL MOULE INOOR IR IRULTOR LWR LINE-H LINE-N XFMR-H E-H ELETRONI E-N IR LENER HUM-H IGN-H FP (3) IN HI IN LO L GN N HUMIIFIER FLME SENSOR 4 V MNULRESETUXILIRYLIMIT ONTROLS I LWR HOT SURFE IGNITER 5 V FRONT OVER PRESSURE SWITH MVH () MV (8) GN L N TO JUNTION OX 4V HUM. MNULRESETROLLOUT LIMITONTROL(S) NO NO 40 V TRNSFORMER GN IN-N ISONNET GN HUM-N IGN-N HIGH FIRE PRESSURE SWITH XFMR-N NO UTORESET PRIMRYLIMIT ONTROL LOW FIRE PRESSURE SWITH PM HI GS VLVE INTEGRTE ONTROL MOULE High Voltage: isconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death STEY ON = NORML OPERTION FLSH = SYSTEM LOKOUT (RETRIES/REYLES EXEEE) FLSHES = LOW FIRE PRESSURE SWITH STUK LOSE 3 FLSHES = LOW FIRE PRESSURE SWITH STUK OPEN 4 FLSHES = THERML PROTETIVE EVIE OPEN 5 FLSHES = FLME SENSE WITH GS VLVE E-ENERGIZE 7 FLSHES = LOW FLME SENSE SIGNL 8 FLSHES = HEK IGNITER OR IMPROPER GROUNING 9 FLSHES = HIGH FIRE PRESSURE SWITH STUK OPEN ONTINUOUS FLSHES = 5 VOLT POWER REVERSE LOW VOLTGE (4V) LOW VOLTGE FIEL HI VOLTGE (5V) HI VOLTGE FIEL JUNTION TERMINL INTERNL TO INTEGRTE ONTROL PLUG ONNETION EQUIPMENT GN FIEL GN FIEL SPLIE SWITH (TEMP.) IGNITER SWITH (PRESS.) OVERURRENT PROT. EVIE WRNING OLOR OES: PK PINK YL YELLOW R ROWN OR ORNGE ITE VT VIOLET U LUE GN GREEN GY GRY LK R RE 3470 REV.00 NOTES:.SET HET NTIIPTOR ON ROOM THERMOSTT T 0.7 MPS..MNUFTURER'S SPEIFIE REPLEMENT PRTS MUST E USE EN SERVIING. 3.IF NY OF THE ORIGINL WIRE S SUPPLIE WITH THE FURNE MUST E REPLE, IT MUST E REPLE WITH WIRING MTERIL HVING TEMPERTURE RTING OF T LEST 05.USE OPPER ONUTORS ONLY. 4. UNIT MUST E PERMNENTLY GROUNE N ONFORM TO N.E.. N LOL OES. Wiring is subject to change. lways refer to the wiring diagram on the unit for the most up-to-date wiring schematic. SS-GMV95 3

14 3 PROUT SPEIFITIONS GMV95/ GV9 LOWER SSEMLY SHEMTI INUTOR OIL (GUV070,090,5 MOELS ONLY) YL INTEGRTE ONTROL MOULE UXILIRY LIMITS (SIES OF LOWER HOUSING) PK FM EM LOWER MOTOR OFF VT UT FOR ON S4 EHUM S3 PIN PIN PIN 3 GY PIN 4 OR PIN 5 PIN 6 Intell-Ignition PIN 7 PIN 8 PIN 9 TWO TSTT W R 9 IRUIT ONNETOR TO MIN HRNESS SINGLE ON S OFF TO EM LWR MOTOR PIN PIN PIN 3 PIN 4 PIN 5 LINE XFMR E IR HUM HUM XFMR LINE PRK OOL E HI HET US LO HET PK GN HOT NEUTRL GROUN TO SROLL HOUSING LINE TRNSFORMER LO GY OR High Voltage: isconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death. WRNING This schematic is for reference only. Not all wiring is as shown above. Refer to the appropriate wiring diagram for the unit being serviced. 4 SS-GMV95

15 PROUT SPEIFITIONS GMV95/ GV9 SHEMTIS (ONT.) LINE HOT 0 V LINE NEU FLME SENSOR PROE FP.0005 M IGNN IGNITOR LOW HET K7 IGN IRULTOR LOWER HIGH HET OOL PRK K K W8 Q K6 GN MV OM MVL P M STGE GS VLVE H NEU IR. PS PS N STGE PRESSURE SWITH HLO HIGH LIMIT ELETRONI IR LENER E E NEU ROLLOUT SWITH ST STGE PRESSURE SWITH IN HI K3 INUER IN LO IN NEU K8a HLI UX LIMIT HUMIIFIER HUM K8b MVH HUMN R TH 3 MP UTOMOTIVE FUSE XFMR 4 V... XFMRN TR / R Y G W W W W Y G THERMOSTT MTE WITH MP USING SOKETS WR 50V6-89 INTEGRTE IGNITION ONTROL This schematic is for reference only. Not all wiring is as shown above. Refer to the appropriate wiring diagram for the unit being serviced. SS-GMV95 5

16 PROUT SPEIFITIONS ESSORIES Model escription GMV X GMV X GMV X GMV95 55X GV9 0704X GV9 0905X GV9 55X LPM-03 LP onversion Kit (Gas Valve) LPM-05 LP onversion Kit (Springs & Orifi ce) GSS Electronic ir leaners (-0, -, - or -8) GMU Media ir leaners (60, 00, 65 or 05) EHUM ehumidistat HPS8 High-ltitude Pressure Switch Kit HPS9 High-ltitude Pressure Switch Kit HPS 3 High-ltitude Pressure Switch Kit HLP High-ltitude Propane Gas Kit HLP 3 High-ltitude Propane Gas Kit HNG 3 High-ltitude Natural Gas Kit HNG 4 High-ltitude Natural Gas Kit HNG 6 High-ltitude Natural Gas Kit EFR0 External Filter Rack VK-0 Horizontal/Vertical oncentric Vent Kit ( ) VK-30 Horizontal/Vertical oncentric Vent Kit (3 ) F ownfl ow Floor ase F4 ownfl ow Floor ase 07K00000S Flush-mount vent kit ll Models up to 7,000 7,00 to, ,00 to 9, ,00 to,000 Note: ll installations above 7,000 require a pressure switch change. For installation in anada, gas furnaces are certifi ed only to 4,500. THERMOSTTS two-stage thermostat should be used with the GMV95/GV9 furnaces. Two-stage thermostats control which firing rate is used depending on the temperature difference between the set point and the room temperature. properly used two-stage thermostat and furnace will maintain a much tighter control of temperature than a conventional single-stage Model escription thermostat and furnace. Two-stage furnaces have W and W terminals. If the thermostat has Y and Y HT90-0 ooling/heating, Mechanical cooling connections and a single-stage cooling system H70TG ooling/heating, igital, Non-programmable is used, connect Y on the furnace control to Y on the thermostat. The table below describes two-stage HSTG ooling/heating, Mechanical thermostats that have been configured for use with this H0TWR Heating Only, Mechanical furnace. Goodman Manufacturing ompany, L.P., reserves the right to discontinue, or change at any time, specifications or designs without notice or without incurring obligations. 008 Goodman Manufacturing ompany, L.P. Houston, Texas Printed in the US. 6 SS-GMV95

GMV95/GCV9 MULTI-POSITION, TWO-STAGE/VARIABLE-SPEED GAS FURNACE

GMV95/GCV9 MULTI-POSITION, TWO-STAGE/VARIABLE-SPEED GAS FURNACE GMV95/GV9 MULTI-POSITION, TWO-STGE/VRILE-SPEE GS FURNE The Goodman brand GMV95/ GV9 Two-Stage, Variable- Speed Gas Furnaces feature a patented aluminized-steel tubular heat exchanger and durable Silicon