Simply. Cheaply. Aesthetically. Turn any surface into a solar system

Transcription

1 Simply. Cheaply. Aesthetically Turn any surface into a solar system 1

2 2

3 Efficient Stable Light weight Reliable Very Cheap 3

4 4

5 5

6 6

7 7

8 8

9 9

10 Flexible Yes Light weight Yes On any surface Very Expensive 10

11 Flexible, light weight and Super low cost Simply. Cheaply. Aesthetically Turn any surface into a solar system 11

12 Combination of air stable, low cost photovoltaic material ( Paint ) (15% potential) and robust selective bottom electrodes net (POC July 15) Solar Rolls (3km long, 600kWp each) that can be cut and glued on any surface. Target cost - $0.13/W- X10 cheaper than any other flexible available product (10% eff) 12

13 Eran Maimon CTO (Inventor) Oded Rozenberg CEO Dr. Yaron Tidhar Chief Chemist Prof. Mercouri Kanatzidis Dr. Ido Hadar 13 Advisor Chemist

14 Introduction Ramon Breakthrough Competition Ministry of Economy Tnufa Grant Ministry of Energy Heznek Grant 14

15 4 patents filed - PCT WO , PCT/IL2015/050588, PCT/IL2015/050576, US62/ patents have been examined by the ISR and got Preliminary Written Opinions - 42 claims considered to be novel and inventive. 15

16 16

17 9 8 Prototype A4 5% Prototype Rolls 10% Sales Working Model 0.05% Lab Photovoltaic Material 1cm 2 5% 3 2 Company Founded Proof-of- Concept 1 0 Seed Current round ->

18 Simply. Cheaply. Aesthetically Turn any surface into a solar system 18

19 Lightweight and flexible: integrate into the floating reservoir covers without additional flotation Thin: no wind load; stable under high winds Non-toxic: drinking water and recyclable Unbreakable: safety, ease of transportation Integration of solar panels with PVC cover sheets 19

20 600 reservoirs in Israel = 60Mm 2 $1.8B market ($30/m 2 ) 1700 reservoirs only in California + Texas + Arizona = 9,640Mm 2 $289B market ($30/m 2 ) 20

21 Solar Roads 21

22 Solar Kits 22

23 Plastic Roofs 23

24 24

25 25

26 Photovoltaic material paint Air Stable Abundant low cost Suitable with high volume industrial techniques (R2R) Efficient 27

27 Low cost: No expensive transparent electrodes No bus bars shadowing Robust configuration: Eliminate shunts Extremely high throughput R2R Suitable for CIGS, A-Si, CdTe, OPV PATENTED!!! 28

28 Oded Rozenberg CEO Eran Maimon CTO (Inventor) Eran holds an M.Sc. in Mechanical Engineering from the solar energy laboratory in Tel Aviv University. He obtained his B.Sc. in Physics and International Relations from the Hebrew University. Winner of the Ramon Breakthrough competition for ground-breaking ideas. In the summer of 2014 Eran attended the Oded was Deputy Director at Metalicon Technologies whose remit included responsibility for the construction of a CNC factory. He is a co-founder of Picaso Aviation Consulting and worked for Israel Aerospace Industries (IAI) as senior flight instructor. Oded gained an MBA in Finance from IDC Herzylia and a BA Economics from the SU Graduate Studies Program at University of Haifa. NASA AMES. 29

29 Ido Hadar (PhD) is a Graduate of the Hebrew University, Jerusalem at the lab of prof. Uri Banin. His research focused on the study of physical and chemical properties of single semiconductor nanocrystals. Yaron Tidhar (PhD) COO Ph.D. Weizmann Institute of Science - self-assembly and photo functional supramolecular polymers. postdoc with prof. David Cahen and prof. Gary Hodes researching perovskite based solar cells. BSc Chemistry cum laude at Ben Gurion University. 30

30 Prof. Mercouri Kanatzidis Mercouri Kanatzidis was born in Thessaloniki, Greece in After obtaining a B. Sc from Aristotle University in Greece, he received his Ph D. in chemistry from the University of Iowa in He was a post-doctoral research associate at the University of Michigan and Northwestern University from 1985 to 1987 and is currently the the Charles E. and Emma H. Morrison Professor of Chemistry at Northwestern University. Mercouri moved to Northwestern in the fall of 2006 from Michigan State University where he was a University Distinguished Professor of Chemistry since Mercouri also holds an appointment at Argonne National Laboratory and is the editor in chief of the Journal of Solid State Chemistry 31

31 Prof. Arie Zaban Extensively published, with multiple commercialized patents related to photovoltaics and materials for energy conversion and storage. A member of the Israeli government advisory committee on alternative fuels, awards include the Israel Chemical Society, Rothschild Fellowship, Michael Landau Research Prize in Renewable Energy and IVS Research Excellence Prize. Prof. Yair Ein-Eli A post-doctoral fellow at Covalent Associates (MA) he headed the Li-ion research group becoming Director of Research and Battery Technology for Electric Fuel. In 2001 he joined the Department of Material Science & Engineering at the Technion and is President of the Israeli Corrosion Forum (NACE Israel) and a member of International Society of Electrochem. Prof. David Cahen Born in the Netherlands, Prof. Cahen earned a B.Sc. in chemistry and physics from the Hebrew University of Jerusalem in He conducted his graduate studies at Northwestern University, earning a Ph.D. in chemistry and materials research in He pursued postdoctoral research in biological photosynthesis at the Hebrew University of Jerusalem and at the Weizmann Institute 32

32 Raw materials Cost per unit ($) Quantity (m2) Cost Substrate 1 + coat Substrate 2 + coat Lamination + circuitry 3.28 Photovoltaic paint + work Top coat Packaging and connectors 0.65 Total Cost (m 2 ) $13.25 Watts per m 2 100W Cost per watt $

33 Raw materials Cost per unit ($) Quantity Cost P- electrode 0.60 Work 1 Total Cost (m 2 ) $

34 Raw materials Cost per unit ($) Quantity Cost N - electrode 0.48 Work 4 Total Cost (m 2 ) $

35 Raw materials Cost per unit ($) Quantity Cost Coat 3 (kg) Coat 4 (kg) Total Cost (m 2 ) 0.23 Total Cost (m 2 ) $