Electrostatic Discharge (ESD) Breakdown between a Recording Head and a Disk with an Asperity
|
|
- Justin Woods
- 6 years ago
- Views:
Transcription
1 Electrostatic Discharge (ESD) Breakdown between a Recording Head and a Disk with an Asperity Al Wallash and Hong Zhu Hitachi Global Storage Technologies San Jose, CA
2 Outline Background Purpose Experimental Setup Results Breakdown behavior with and without asperity Failure analysis: where does breakdown occur? Conclusions
3 Background Electrical breakdown across spark gap Gap spacing < 5 µm DC pre-breakdown current: ~ na Field emission (or tunneling) Fowler-Nordheim equation Transient discharge current: ~ ma Physical damage melting Lead-shield breakdown V Metal-Insulator-Metal spark gap Conductor Insulator Conductor Factors that affect breakdown voltage Dielectric film properties Thickness and material Electrode Geometry of anode and cathode E-field enhancement at sharp edges Materials: work functions Fowler-Nordheim Equation I = ae 2 e b Φ E 3 / 2
4 Purpose Hard disk drive: Head disk interface = spark gap Thin carbon overcoat (COC) films ~ 3nm head, ~3nm disk Fly height = air gap: V <10nm Head-disk contact possible COC Asperities Load/unload Disk Slider Asperity Study electrical breakdown with head-disk asperity contact Electrical breakdown voltage? Physical damage to slider air bearing surface? Likelihood of ESD damage to read sensor?
5 Experimental Setup Modified Guzik XY Spin stand Float suspension and disk Disk connected to Source/Measure Unit Floating suspension connected to ground through current probe Measurements Voltage on disk, DC current, transient current (2 GHz bandwidth) Acoustic emission (AE) and thermal asperity (TA) to position sensor over asperity GMR resistance (R), track averaged amplitude (TAA), asymmetry Acoustic Emission Sensor Head signals to Preamplifier AE - Transient current probe TEK CT6 Source/Measure Unit Keithley Head Trek P1122 noncontact voltmeter Disk Air Bearing Spindle
6 Experimental Setup Heads and media 40 GMR heads (60 Gb/in 2 ) on a metal AlMag disk; 15k RPM Asperity Indentation: diamond spherical tip with 50 µm radius Pile-up height ~ 30 nm Test Sequence Ramp disk voltage: + or - Dwell time: 1sec Measure R and TAA Breakdown: transient current > 1mA TA signal Disk Voltage (V) Ramped disk voltage 1 second dwell time Time (min) Read back signal Current 4 ma/div Transient current (CT-6) At breakdown
7 Current vs. Voltage DC Current (na) DC Transient Asperity Head 1 Head 2 No asperity Breakdown Transient Current (ma) Increase in DC current, then breakdown Breakdown voltage Without asperity (smooth disk): 3.4V With asperity: 1.6V Disk Voltage (V) 0
8 Breakdown Voltage Frequency Smooth Asperity Average breakdown voltage Asperity Disk Voltage (V) Without asperity With asperity +V V Both + and disk voltage Significant decrease in breakdown voltage with asperity
9 Behavior vs. Voltage: No asperity 53 No asperity (smooth disk) Resistance 1.6 Resistance (Ω) TAA Breakdown at 3.4V 1.5 TAA (mv) Disk Voltage (V) 1.4 TAA increase: electrostatic attraction = spacing decrease No TAA or resistance change after breakdown
10 Behavior vs. Voltage: With asperity 70 Resistance With asperity 1.5 Resistance (Ω) TAA Breakdown at 1.7V Disk Voltage (V) TAA (mv) With asperity positioned over read sensor during breakdown TAA changes Resistance increase Read sensor damaged by breakdown over asperity
11 Slider Damage: No Asperity Sensor area largely unaffected Breakdown to slider body Transient current between slider and disk GMR sensor undamaged Breakdown between disk and conductive TiC grains
12 Slider Damage: With Asperity Breakdown at TiC conductive grains on air bearing surface in center pad Similar to case with no asperity Shields and sensor show damage Breakdown between asperity and shields/reader Direct current flow to GMR leads Severe magnetic damage similar to ESD damage during handling After breakdown with Asperity Mag = 4k X Breakdown between disk and conductive TiC grains After breakdown with Asperity Mag = 25k X
13 Summary and Conclusions Breakdown Voltage (V) Breakdown location Read sensor damage Without asperity With asperity +3.4 / / -2.6 TiC grains on slider No TiC grains and shields/sensor Yes 1. Significant reduction in head-disk breakdown voltage (~50% reduction) 2. Additional damage to shields and sensor area 3. Severe magnetic damage to the read sensor Important to include asperities in head-disk breakdown reliability testing
14 Backup slides
15 Current vs. + and Disk Voltage DC Current (na) Four different heads and disks DC Transient No asperity Asperity Asperity Disk Voltage (V) No asperity Negative voltage, no asperity No measurable pre-breakdown current Transient Current (ma)
16 H45, with asperity, +V on disk, head died H46, with asperity off sensor, +V on disk, no sensor damage
17 Optical Slider Damage: Asperity away from sensor
18 Breakdown damage Step edge
GMR Read head. Eric Fullerton ECE, CMRR. Introduction to recording Basic GMR sensor Next generation heads TMR, CPP-GMR UCT) Challenges ATE
GMR Read head Eric Fullerton ECE, CMRR Introduction to recording Basic GMR sensor Next generation heads TMR, CPP-GMR UCT) Challenges ATE 1 Product scaling 5 Mbyte 100 Gbyte mobile drive 8 Gbyte UCT) ATE
More informationLow Voltage Contact Electrostatic Discharge Phenomena
Conf Presentation - >SESSION.PAPER< - replace with your Session & Paper # (DOUBLE-CLICK HERE TO EDIT) < 1 Low Voltage Contact Electrostatic Discharge Phenomena Tetsuji Oda, Yuto Ono, Hiraku Miyasaka Abstract
More informationMiniature Vacuum Arc Thruster with Controlled Cathode Feeding
Miniature Vacuum Arc Thruster with Controlled Cathode Feeding Igal Kronhaus and Matteo Laterza Aerospace Plasma Laboratory, Faculty of Aerospace Engineering, Technion - Israel Institute of Technology,
More informationEXPLORING SCANNING PROBE MICROSCOPY WITH MATHEMATICA
EXPLORING SCANNING PROBE MICROSCOPY WITH MATHEMATICA Dror Sarid University of Arizona A WILEY-1NTERSCIENCE PUBLICATION JOHN WILEY & SONS, INC. New York Chichester Weinheim Brisbane Singapore Toronto CONTENTS
More informationDEPARTMENT OF ELECTRICAL ENGINEERING DIT UNIVERSITY HIGH VOLTAGE ENGINEERING
UNIT 1: BREAKDOWN IN SOLIDS 1.) Introduction: The solid dielectric materials are used in all kinds of electrical apparatus and devices to insulate current carrying part from another when they operate at
More informationWafer Charging in Process Equipment and its Relationship to GMR Heads Charging Damage
Wafer Charging in Process Equipment and its Relationship to GMR Heads Charging Damage Wes Lukaszek Wafer Charging Monitors, Inc. 127 Marine Road, Woodside, CA 94062 tel.: (650) 851-9313, fax.: (650) 851-2252,
More informationPHYSICS NOTE. Field-Induced Thin Oxide Wearout PN-103. Introduction. Extrinsic and Intrinsic Behavior
PHYSICS NOTE PN-103 Field-Induced Thin Oxide Wearout Introduction Under voltage stress, the insulating quality of a thin oxide degrades due to generation of defects. If defects align themselves sufficiently
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationCST EM : Examples. Chang-Kyun PARK (Ph. D. St.) Thin Films & Devices (TFD) Lab.
CST Advanced Training 2004 @ Daedeok Convention Town (2004.03.24) CST EM : Examples TM EM Studio TM Chang-Kyun PARK (Ph. D. St.) E-mail: ckpark@ihanyang.ac.kr Thin Films & Devices (TFD) Lab. Dept. of Electrical
More informationGas Discharge Tube (GDT) Data Sheet
Gas Discharge Tube (GDT) Data Sheet Features Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs. Stable breakdown voltage. High insulation resistance.
More informationRS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
More informationFeatures Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch
ProLight PM2G-1LYE-WSL 1W 370nm + 400nm Power LED Technical Datasheet Version: 1.3 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Typical
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More informationThe ESD5451R is available in DFP1006-2L package. Standard products are Pb-free and Halogen-free. Circuit diagram
ESD5451R 1-Line, Bi-directional, Transient Voltage Suppressors http//:www.sh-willsemi.com Descriptions The ESD5451R is a bi-directional TVS (Transient Voltage Suppressor). It is specifically designed to
More informationSuper Bright LEDs, Inc.
Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Forward Current I F 700 ma Reverse Voltage
More informationESD: Another kind of lethal contaminant?
DATA STORAGE February 1997 ESD: Another kind of lethal contaminant? Drive Makers Have to Stand Guard Against a New Enemy: Static Electricity Douglas Cooper and Rob Linke, The Texwipe Company As recently
More informationValidity of measurement and calculation on electrostatically induced voltage of ungrounded metal box generated by moving charged body
Proc. ESA Annual Meeting on Electrostatics 2013 1 Validity of measurement and calculation on electrostatically induced voltage of ungrounded metal box generated by moving charged body Norimitsu Ichikawa
More informationFigure 1: Left: Image from A new era: Nanotube displays (Nature Photonics), Right: Our approximation of a single subpixel
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Electrical Engineering and Computer Science 6.007 Electromagnetic Energy: From Motors to Lasers Spring 2011 Problem Set 2: Energy and Static Fields Due
More informationAll about sparks in EDM
All about sparks in EDM (and links with the CLIC DC spark test) Antoine Descoeudres, Christoph Hollenstein, Georg Wälder, René Demellayer and Roberto Perez Centre de Recherches en Physique des Plasmas
More informationMeasurement of the electric field at the near field radiating by electrostatic discharges
Proceedings of the 6th WSEAS International Conference on Instrumentation, Measurement, Circuits & Systems, Hangzhou, China, April 15-17, 2007 43 Measurement of the electric field at the near field radiating
More informationMLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/10 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
More informationDisplay Surface-mount ELSS-511UBWA/C470
Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. The product
More informationFrom nanophysics research labs to cell phones. Dr. András Halbritter Department of Physics associate professor
From nanophysics research labs to cell phones Dr. András Halbritter Department of Physics associate professor Curriculum Vitae Birth: 1976. High-school graduation: 1994. Master degree: 1999. PhD: 2003.
More informationUVTOP265-HL-TO39. Description. Maximum Rating (T CASE = 25 C) Electro-Optical Characteristics (T CASE = 25 C, I F = 20 ma)
v3.0 05/17 UVTOP265-HL-TO39 Deep Ultraviolet Light Emission Source 270 nm, 0.6 mw TO39 Package Hemispherical Sapphire Lens Forensic Analysis, Disinfection Description UVTOP265-HL-TO39 is a deep ultraviolet
More informationNonstationary electrical charge distribution on the fused silica bifilar pendulum and its effect on the mechanical Q-factor
Nonstationary electrical charge distribution on the fused silica bifilar pendulum and its effect on the mechanical Q-factor V.P. Mitrofanov, L.G. Prokhorov, K.V. Tokmakov Moscow State University G050097-00-Z
More informationPhysics 196 Final Test Point
Physics 196 Final Test - 120 Point Name You need to complete six 5-point problems and six 10-point problems. Cross off one 5-point problem and one 10-point problem. 1. Two small silver spheres, each with
More informationSensors and Metrology. Outline
Sensors and Metrology A Survey 1 Outline General Issues & the SIA Roadmap Post-Process Sensing (SEM/AFM, placement) In-Process (or potential in-process) Sensors temperature (pyrometry, thermocouples, acoustic
More informationEXPERIMENTAL INVESTIGATION AND MODELING OF SURFACE DISCHARGES FOR CHARGED DIELECTRIC MATERIALS
EXPERIMENTAL INVESTIGATION AND MODELING OF SURFACE DISCHARGES FOR CHARGED DIELECTRIC MATERIALS Lutz Müller Institute of Power Transm. and High Voltage Technology University of Stuttgart, Germany lmuell@ieh.uni-stuttgart.de
More informationComparison of Partial Discharge Characteristics for Different Defect Types in SF 6 Gas Insulation System
Comparison of Partial Discharge Characteristics for Different Defect Types in SF 6 Gas Insulation System D.A. Mansour, T. Okusu, K. Nishizawa, H. Kojima, N. Hayakawa, F. Endo and H. Okubo Nagoya University
More informationSingle Electron Transistor (SET)
Single Electron Transistor (SET) e - e - dot C g V g A single electron transistor is similar to a normal transistor (below), except 1) the channel is replaced by a small dot. 2) the dot is separated from
More informationElectrostatic measurements around a cryo-jet
Electrostatic measurements around a cryo-jet KIT, 2018-04-19 Pre-normative REsearch for Safe use of Liquid HYdrogen 1 PRESLHY Kick-off Meeting, April 16-20, 2018, KIT, Karlsruhe, Germany Content I. Intro
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationPHI 5000 Versaprobe-II Focus X-ray Photo-electron Spectroscopy
PHI 5000 Versaprobe-II Focus X-ray Photo-electron Spectroscopy The very basic theory of XPS XPS theroy Surface Analysis Ultra High Vacuum (UHV) XPS Theory XPS = X-ray Photo-electron Spectroscopy X-ray
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer GO-SMS series I P N = 10... 30 A Ref: GO 10-SMS, GO 20-SMS, GO 30-SMS For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the
More informationNeedle cathodes for high-brightness beams. Chase Boulware Jonathan Jarvis Heather Andrews Charlie Brau
Needle cathodes for high-brightness beams Chase Boulware Jonathan Jarvis Heather Andrews Charlie Brau Outline of the talk What is brightness? Definition Sources Why is brightness important? Light sources
More informationSurface Mount UV LED. NUVA33 Series PART NUMBERING SYSTEM. WAVELENGTH CODES Code Nominal Wavelength
FEATURES SURFACE MOUNT 3.4mm x 3.4mm x 2.37mm WAVELENGTH 365 ~ 45nm FOR UV CURING, PHOTO CATALYST & SENSOR LIGHTING RoHS COMPLIANT COMPATIBLE WITH REFLOW SOLDERING TAPE AND REEL PACKAGING SPECIFICATIONS
More informationElectrical Characterization with SPM Application Modules
Electrical Characterization with SPM Application Modules Metrology, Characterization, Failure Analysis: Data Storage Magnetoresistive (MR) read-write heads Semiconductor Transistors Interconnect Ferroelectric
More informationBursting Drops in Solids Caused by High Voltages
Supplementary Information for Bursting Drops in Solids Caused by High Voltages Qiming Wang 1, Zhigang Suo 2 and Xuanhe Zhao 1 * 1 Soft Active Materials Laboratory, Department of Mechanical Engineering
More informationMost matter is electrically neutral; its atoms and molecules have the same number of electrons as protons.
Magnetism Electricity Magnetism Magnetic fields are produced by the intrinsic magnetic moments of elementary particles associated with a fundamental quantum property, their spin. -> permanent magnets Magnetic
More informationMLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/11 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
More informationElectrical and Optical Characteristics at IF=750mA and TA=25 C Absolute Maximum Ratings
Table of Contents 1. Product Description 2 2. Outline Dimensions 3 3. Electrical and Optical Characteristics 4 Electrical and Optical Characteristics at IF=75mA and TA=25 C Absolute Maximum Ratings 4.
More informationSMD 3528 [Full Color]
Specification for ViTron LED SMD 3528 [Full Color] Part No. : VPSFC3528-W Revision No. : Ver 1.0 Date : Mar. 16, 2015 VISSEM Electronics Co., Ltd. 1. SPECIFICATION Absolute Maximum Rating (T a = 25 C)
More informationSMD 3528 [Full Color]
Specification for ViTron LED SMD 3528 [Full Color] Part No. : VPSFC3528-H Revision No. : Ver 2.0 Date : Feb. 5, 2008 VISSEM Electronics Co., Ltd. 1. SPECIFICATION Absolute Maximum Rating (T a = 25 C) Parameter
More informationH21A1 / H21A2 / H21A3 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH
HA / HA / HA.07 (.85). (.8) NOTES: 0.9 (6.5) 0. (6.5) 0.5 (.) 0.9 (.0) PACKAGE DIMENSIONS.95 (7.5).7 (6.9) 0.97 (.7) 0.957 (.) 0.7 (.0) 0.57 (.6) D E 0.755 (9.) 0.75 (8.9) 0.9 (.) 0.9 (.0) Ø 0. (.) Ø 0.6
More informationLecture 7: Electron Emission
Lecture 7: Electron Emission Solid state physics of metals E_f > E_c --> Many conduction carriers E_f - Fermi level E_c - minimum conduction band energy A realistic potential well in a metal crystal An
More informationFrom Hall Effect to TMR
From Hall Effect to TMR 1 Abstract This paper compares the century old Hall effect technology to xmr technologies, specifically TMR (Tunnel Magneto-Resistance) from Crocus Technology. It covers the various
More informationWorkshops on X-band and high gradients: collaboration and resource
Workshops on X-band and high gradients: collaboration and resource 25 October 2012 International workshop on breakdown science and high gradient technology 18-20 April 2012 in KEK 25 October 2012 International
More informationOperational Field Coupled ESD Susceptibility of Magnetic Sensor IC s in Automotive Applications
Operational Field Coupled ESD Susceptibility of Magnetic Sensor IC s in Automotive Applications *2014 IEEE International Symposium on Electromagnetic Compatibility, Raleigh, North Carolina Cyrous Rostamzadeh,
More informationTrek electrostatic voltmeters Setup, environment, working conditions
Dr. Maciej A. Noras 1 Introduction Abstract An analysis of basic sources of errors for electrostatic voltmeter measurements is presented. Stray capacitance and synchronous noise pickup are identified as
More informationGREEN-RED SMD LED VPSGR5450-VMS. Specification for ViTron LED SMD 5450 [VMS] Revision No. : Ver 1.0. Date : Aug. 7, VISSEM Electronics Co., Ltd.
Specification for ViTron LED SMD 5450 [VMS] Part No. : VPSGR5450-VMS Revision No. : Ver 1.0 Date : Aug. 7, 2011 VISSEM Electronics Co., Ltd. 1. SPECIFICATION Absolute Maximum Rating (T a = 25 C) Parameter
More informationFirst Sensor APD Array Data Sheet Part Description 64AA SMD Order #
Responsivity (A/W) First Sensor APD Array Data Sheet Features Description Application RoHS 64 element APD array High QE >8% for λ = 7-91 nm High speed, low noise High uniformity, low cross talk Absolute
More informationPHOTODARLINGTON OPTICAL INTERRUPTER SWITCH
HB HB HB3 PACKAGE DIMENSIONS 0.7 (.0) 0.57 (.6) C L 0.9 (6.35) 0.3 (6.5) D E C L 0.39 (.00) 0.3 (0.85).33 (3.38).073 (.85) 0.9 (3.3) 0.9 (3.0) 0.33 (.0) 0. (0.7) Optical C L 0.5 (3.) 0.9 (3.0).35 (8.00).95
More informationInfluence of magnetic field and mechanical scratch on the recorded magnetization stability of longitudinal and perpendicular recording media
Available online at www.sciencedirect.com Physics Procedia 16 (2011) 53 57 The 9th Perpendicular Magnetic Recording Conference Influence of magnetic field and mechanical scratch on the recorded magnetization
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A jeweler needs to electroplate gold (atomic mass 196.97 u) onto a bracelet. He knows
More informationDisplay Surface-mount ELSS-205SYGWA/S530-E2/S290
Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. The product
More informationSMD 2121 [Full Color]
Specification for ViTron LED SMD 2121 [Full Color] Part No. : VPSFC2121-B Revision No. : Ver 7.0 Date : Apr. 29, 2016 VISSEM Electronics Co., Ltd. 1. SPECIFICATION Absolute Maximum Rating (T a = 25 C)
More informationAP Physics C. Electricity - Term 3
AP Physics C Electricity - Term 3 Interest Packet Term Introduction: AP Physics has been specifically designed to build on physics knowledge previously acquired for a more in depth understanding of the
More informationThis document is downloaded from DR-NTU, Nanyang Technological University Library, Singapore.
This document is downloaded from DR-NTU, Nanyang Technological University Library, Singapore. Title Performance analysis of an integrated piezoelectric ZnO sensor for detection of head disk contact Author(s)
More informationScanning Probe Microscopy
1 Scanning Probe Microscopy Dr. Benjamin Dwir Laboratory of Physics of Nanostructures (LPN) Benjamin.dwir@epfl.ch PH.D3.344 Outline: Introduction: What is SPM, history STM AFM Image treatment Advanced
More informationNR/RR. Set No. 2 CODE NO: NR/RR210204
Set No. 2 II B.Tech I Semester Examinations,May 2011 ELECTROMAGNETIC FIELDS Electrical And Electronics Engineering Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks
More informationTransition from Boundary Lubrication to Hydrodynamic Lubrication of Slider Bearings
R. C. Tseng F. E. Talke Transition from Boundary Lubrication to Hydrodynamic Lubrication of Slider Bearings Abstract: The transition from boundary lubrication to fully hydrodynamic lubrication is investigated
More informationInternal Charging Hazards in Near-Earth Space during Solar Cycle 24 Maximum: Van Allen Probes Measurements
Internal Charging Hazards in Near-Earth Space during Solar Cycle 24 Maximum: Van Allen Probes Measurements T. Mulligan Skov, J.F. Fennell, J.L. Roeder, J.B. Blake, and S.G. Claudepierre The Aerospace Corporation,
More informationProject report. Spacecraft Charging and Mitigation Methods. By Muhammad Azam. Abstract
Umeå University October 7, 2009 Department of physics Space physics 7.5 ECTS. Project report Spacecraft Charging and Mitigation Methods By Muhammad Azam Muhammad.azam1@yahoo.com Supervisor Kjell Rönnmark
More informationElectromagnetics in COMSOL Multiphysics is extended by add-on Modules
AC/DC Module Electromagnetics in COMSOL Multiphysics is extended by add-on Modules 1) Start Here 2) Add Modules based upon your needs 3) Additional Modules extend the physics you can address 4) Interface
More informationSCANNING! MAGNETIC TUNNEL JUNCTION (MTJ)! MICROSCOPY!! High-resolution magnetic imaging of geologic samples" Ioan Lascu and Richard J.
SCANNING! MAGNETIC TUNNEL JUNCTION (MTJ)! MICROSCOPY!! High-resolution magnetic imaging of geologic samples" Ioan Lascu and Richard J. Harrison" OVERVIEW" 1. Scanning magnetic microscopy" 2. MTJ microscopy"
More informationPico-Satellite Orbit Control by Vacuum Arc Thrusters as Enabling Technology for Formations of Small Satellites
1/25 Pico-Satellite Orbit Control by Vacuum Arc Thrusters as Enabling Technology for Formations of Small Satellites Igal Kronhaus, Mathias Pietzka, Klaus Schilling, Jochen Schein Department of Computer
More informationSolution for High Voltage Engineering
Solution for High Voltage Engineering December 2015 Index Q.1) a).2 b).3 c).4-6 d).7 e). 8-9 Q.2) a). 10-11 b). 12-17 Q.3) a). 17-21 b).22-25 Q.4) a). 26-29 b). N.A Q.5) a).30 b).31-32 Q.6) a).33-36 b).
More informationAS THE spacing between the slider and the disk decreases
IEEE TRANSACTIONS ON MAGNETICS, VOL. 42, NO. 2, FEBRUARY 2006 241 Alternate Air Bearing Slider Designs for Areal Density of 1 Tb/in 2 Jia-Yang Juang, Du Chen, and David B. Bogy, Fellow, IEEE Computer Mechanics
More informationExponential Expression of Relating Different Positive Point Electrode for Small Air Gap Distance
Research Journal of Applied Sciences, Engineering and Technology 2(6): 512-518, 2010 ISSN: 2040-7467 Maxwell Scientific Organization, 2010 Submitted Date: April 17, 2010 Accepted Date: June 14, 2010 Published
More informationYBR-12FRW00-C. ø12mm bi-color LED (common cathode)
Features: 1) Chip Material: AlGaInP & InGaN 2) Lens Color: Water Clear 3) Source Color: Red & White 4) Pb free 5) The product itself will remain within RoHS compliant version. Dimensions: 13.4 11.5 13.6
More informationDielectric Analysis of Solid Insulations
using Dielectric Test Fixture 16451B from Keysight By Britta Pfeiffer 2018 by OMICRON Lab V2.0 Visit www.omicron-lab.com for more information. Contact support@omicron-lab.com for technical support. Page
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer GO-SME series I P N = 10 20 A Ref: GO 10-SME, GO 20-SME For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
More informationAir-Bearing Effects on Actuated Thermal Pole-Tip Protrusion for Hard Disk Drives
Air-Bearing Effects on Actuated Thermal Pole-Tip Protrusion for Hard Disk Drives Jia-Yang Juang David B. Bogy Computer Mechanics Laboratory, Department of Mechanical Engineering, University of California
More information3mm Photodiode PD204-6B
3mm Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer GO-SMS/SP3 series I P N = 10... 30 A Ref: GO 10-SMS/SP3, GO 20-SMS/SP3, GO 30-SMS/SP3 For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the
More informationTechnical Data Sheet - Preliminary Top View LEDs
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant version. Descriptions
More informationCapacitance and Dielectrics
Slide 1 / 39 Capacitance and Dielectrics 2011 by Bryan Pflueger Capacitors Slide 2 / 39 A capacitor is any two conductors seperated by an insulator, such as air or another material. Each conductor has
More informationModeling of Ultrasonic Near-Filed Acoustic Levitation: Resolving Viscous and Acoustic Effects
Modeling of Ultrasonic Near-Filed Acoustic Levitation: Resolving Viscous and Acoustic Effects I. Melikhov *1, A. Amosov 1, and S. Chivilikhin 2 1 Corning Scientific Center, Russia, 2 ITMO University, Russia
More informationFinal Exam: 11 May 2001, Friday, 10 AM
Spring 2001 BE 3600 BioInstrumentation Final Exam: 11 May 2001, Friday, 10 AM ACTUALLY ADMINISTERED IN CLASS This exam: Consists of 12 questions, Score from this exam will determine 25-30 % of your grade,
More informationSpecification for ViTron Photo Diode. Ø5 OVAL [Photo Diode] Part No. : VPD5V-BN60T. VISSEM Electronics Co., Ltd. Revision No. : Ver. 1.
` Specification for ViTron Photo Diode Ø5 OVAL [Photo Diode] Part No. : Revision No. : Ver. 1.0 Date : Feb. 28. 2014 VISSEM Electronics Co., Ltd. 1. SPECIFICATION Absolute Maximum Rating (T a = 25 C) Parameter
More informationTouchdown of Flying Recording Head Sliders on Continuous and Patterned Media
IEEE TRANSACTIONS ON MAGNETICS, VOL. 49, NO. 6, JUNE 2013 2477 Touchdown of Flying Recording Head Sliders on Continuous and Patterned Media Jia-Yang Juang and Kuan-Te Lin Department of Mechanical Engineering,
More informationCree PLCC8 4 in 1 SMD LED CLQ6A-TKW
Cree PLCC8 4 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1387.004 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 4 color SMT LEDs are designed
More informationDisplay Surface-mount ELSS-406SURWA/S530-A3/S290
Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. Pb free
More informationFeatures Low Power Consumption Various Colors Meet ROHS Green Product. Applications Backlight and Indicator. Package Dimensions.
Features Low Power Consumption Various Colors Meet ROHS Green Product. Applications Backlight and Indicator Package Dimensions + CATHODE Patent Protection Notes: 1. All dimensions are in millimeters (inches).
More informationLecture 4 Scanning Probe Microscopy (SPM)
Lecture 4 Scanning Probe Microscopy (SPM) General components of SPM; Tip --- the probe; Cantilever --- the indicator of the tip; Tip-sample interaction --- the feedback system; Scanner --- piezoelectric
More informationContents: 1) IEC and Helicon 2) What is HIIPER? 3) Analysis of Helicon 4) Coupling of the Helicon and the IEC 5) Conclusions 6) Acknowledgments
Contents: 1) IEC and Helicon 2) What is HIIPER? 3) Analysis of Helicon 4) Coupling of the Helicon and the IEC 5) Conclusions 6) Acknowledgments IEC:! IEC at UIUC modified into a space thruster.! IEC has
More informationApplication of Plasma Phenomena Lecture /3/21
Application of Plasma Phenomena Lecture 3 2018/3/21 2018/3/21 updated 1 Reference Industrial plasma engineering, volume 1, by J. Reece Roth, Chapter 8-13. Plasma physics and engineering, by Alexander Fridman
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering ESD protection Pb-free The product itself will remain within RoHS compliant
More informationTechnical Data Sheet. Pb Free. Specification GR101 SSC. Customer. Rev. 02 January 서식번호 : SSC- QP (Rev.0.
Specification GR101 Pb Free Drawn SSC Approval Customer Approval [ Contents ] 1. Description 2. Absolute maximum ratings 3. Electro-Optical characteristics 4. Characteristic diagrams 5. Reliability result
More informationJlab FEL Photoemission DC Guns
Jlab FEL Photoemission DC Guns Fay Hannon On behalf of the FEL team FLS 2010, 2 nd March 2 Operational Guns 1. FEL Gun 60m Gun Test Stand (GTS) 2. Backup gun, test stand with beam characterization beamline
More informationPRACTICE NO. PD-AP-1309 PREFERRED PAGE 1 OF 5 RELIABILITY PRACTICES ANALYSIS OF RADIATED EMI FROM ESD EVENTS CAUSED BY SPACE CHARGING
PREFERRED PAGE 1 OF 5 RELIABILITY PRACTICES ANALYSIS OF RADIATED EMI FROM ESD EVENTS Practice: Modeling is utilized for the analysis of conducted and radiated electromagnetic interference (EMI) caused
More informationAnalysis of Geometrical Aspects of a Kelvin Probe
Analysis of Geometrical Aspects of a Kelvin Probe Stefan Ciba 1, Alexander Frey 2 and Ingo Kuehne* 1 1 Heilbronn University, Institute for Fast Mechatronic Systems (ISM), Kuenzelsau, Germany 2 University
More informationExperiment 2 Electric Field Mapping
Experiment 2 Electric Field Mapping I hear and I forget. I see and I remember. I do and I understand Anonymous OBJECTIVE To visualize some electrostatic potentials and fields. THEORY Our goal is to explore
More informationCode No: RR Set No. 1
Code No: RR410209 Set No. 1 1. What are the gases mainly used in insulating medium at high pressures? Which is more suitable? Why? What about its dielectric strength? Explain. [16] 2. (a) Define time lags
More informationInstrumentation and Operation
Instrumentation and Operation 1 STM Instrumentation COMPONENTS sharp metal tip scanning system and control electronics feedback electronics (keeps tunneling current constant) image processing system data
More information5mm Phototransistor T-1 3/4 PT334-6C
Features Fast response time High photo sensitivity Pb free The product itself will remain within RoHS compliant version. Description is a high speed and high sensitive silicon NPN epitaxial planar phototransistor
More informationThe Basic Capacitor. Dielectric. Conductors
Chapter 9 The Basic Capacitor Capacitors are one of the fundamental passive components. In its most basic form, it is composed of two conductive plates separated by an insulating dielectric. The ability
More informationAuthors: D.S.Roveri 1, H.H.Bertan 1, M.A.R.Alves 1, J.F.Mologni 2, E.S.Braga 1
Use of Ansoft Maxwell software platform for investigation of electrostatic properties of a hemisphere on a post geometry aimed to model field emission devices Authors: D.S.Roveri 1, H.H.Bertan 1, M.A.R.Alves
More informationPHOTOVOLTAIC SOLID-STATE RELAY OPTOCOUPLERS
PACKAGE SCHEMATIC ANODE 6 DRAIN 6 CATHODE 2 5 6 N/C 3 4 DRAIN DESCRIPTION The HSR32 and HSR42 devices consist of a AlGaAs infrared emitting diode optically coupled to a power MOSFET detector which is driven
More information