*** SAMPLE ONLY! The actual NASUNI-FILER-MIB file can be accessed through the Filer address>/site_media/snmp/nasuni-filer-mib ***

Transcription

1 *** SAMPLE ONLY! The actual NASUNI-FILER-MIB file can be accessed through the Filer address>/site_media/snmp/nasuni-filer-mib *** NASUNI-FILER-MIB DEFINITIONS ::= BEGIN -- Nasuni Filer MIB object definitions -- Copyright (c) Nasuni Corporation, all rights reserved -- Imports IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Counter64, TimeTicks FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC; -- Module Identification nasuni MODULE-IDENTITY LAST-UPDATED " Z" ORGANIZATION "Nasuni Corporation" CONTACT-INFO DESCRIPTION "Nasuni Filer MIB object definitions" REVISION " Z" DESCRIPTION "First Revision" ::= { enterprises } -- Filer Stats (.1) filer OBJECT IDENTIFIER ::= { nasuni 1 } fileridentifier OBJECT-TYPE DESCRIPTION "Identity of this management system." DEFVAL { "Nasuni Filer" } ::= { filer 1 } filerversion OBJECT-TYPE DESCRIPTION "Current Filer version" ::= { filer 2 } filerserialnumber OBJECT-TYPE

2 DESCRIPTION "Current Filer version" ::= { filer 3 } fileruptime OBJECT-TYPE SYNTAX TimeTicks DESCRIPTION "Current uptime of the Filer" ::= { filer 4 } filerupdateavailable OBJECT-TYPE DESCRIPTION "Blank if no updates available, otherwise the version of the update." ::= { filer 5 } filertotalunprotecteddata OBJECT-TYPE DESCRIPTION "Total data not yet protected." ::= { filer 6 } filerpushescompleted OBJECT-TYPE DESCRIPTION "Total number of pushes to the cloud" ::= { filer 7 } filertotalpushed OBJECT-TYPE DESCRIPTION "Total compressed bytes pushed to the cloud" ::= { filer 8 } filertotalread OBJECT-TYPE DESCRIPTION "Total bytes read from the cloud" ::= { filer 9 } fileropensforread OBJECT-TYPE

3 DESCRIPTION "Total number of opens for read" ::= { filer 10 } fileropensforwrite OBJECT-TYPE DESCRIPTION "Total number of opens for write" ::= { filer 11 } filermergeconflicts OBJECT-TYPE DESCRIPTION "Total number of merge conflicts" ::= { filer 12 } filerreadhits OBJECT-TYPE DESCRIPTION "Total read cache hits" ::= { filer 13 } filerreadmisses OBJECT-TYPE DESCRIPTION "Total read cache misses" ::= { filer 14 } filernextfsckafter OBJECT-TYPE DESCRIPTION "Date for the next scheduled fsck" ::= { filer 15 } -- Cache Stats (.1.100) filercache OBJECT IDENTIFIER ::= { filer 100 } filercachetotal OBJECT-TYPE DESCRIPTION "Total available disk cache available" ::= { filercache 1 } filercacheused OBJECT-TYPE

4 DESCRIPTION "Current used disk cache" ::= { filercache 2 } filercachefree OBJECT-TYPE DESCRIPTION "Current free disk cache" ::= { filercache 3 } -- Platform Stats (.1.101) filerplatform OBJECT IDENTIFIER ::= { filer 101 } filerplatformname OBJECT-TYPE DESCRIPTION "Filer platform name" ::= { filerplatform 1 } filerplatformtype OBJECT-TYPE DESCRIPTION "Filer platform type" ::= { filerplatform 2 } filerpackageformat OBJECT-TYPE DESCRIPTION "Filer package format" ::= { filerplatform 3 } filerbiosversion OBJECT-TYPE DESCRIPTION "Current bios version" ::= { filerplatform 4 } filercpumodel OBJECT-TYPE

5 DESCRIPTION "CPU model long description" ::= { filerplatform 5 } filerphyscpucount OBJECT-TYPE DESCRIPTION "Number of physical CPUs in the Filer" ::= { filerplatform 6 } filercorecount OBJECT-TYPE DESCRIPTION "Number of cores per physical CPU" ::= { filerplatform 7 } filercpuarch OBJECT-TYPE DESCRIPTION "CPU architecture" ::= { filerplatform 8 } filercpufreq OBJECT-TYPE UNITS "hertz" DESCRIPTION "CPU frequency" ::= { filerplatform 9 } filerdiskcount OBJECT-TYPE DESCRIPTION "Number of disks in the Filer" ::= { filerplatform 10 } filertotalmemory OBJECT-TYPE DESCRIPTION "Total amount of memory in the Filer" ::= { filerplatform 11 } -- Health Stats (.1.102) filerhealth OBJECT IDENTIFIER ::= { filer 102 }

6 filerambienttemp OBJECT-TYPE UNITS "degrees celsius" DESCRIPTION "Filer ambient temperature (0 if not available)" ::= { filerhealth 1 } filerinlettemp OBJECT-TYPE UNITS "degrees celsius" DESCRIPTION "Filer inlet temperature (0 if not available)" ::= { filerhealth 2 } filerexhausttemp OBJECT-TYPE UNITS "degrees celsius" DESCRIPTION "Filer exhaust temperature (0 if not available)" ::= { filerhealth 3 } filernumpowersupplies OBJECT-TYPE DESCRIPTION "Number of power supplys detected" ::= { filerhealth 4 } filerpowersupplyerrors OBJECT-TYPE DESCRIPTION "Number of power supply errors detected" ::= { filerhealth 5 } filernumraidarrays OBJECT-TYPE DESCRIPTION "Number of RAID arrays detected" ::= { filerhealth 6 } filerraidarrayerrors OBJECT-TYPE DESCRIPTION "Number of RAID array errors detected" ::= { filerhealth 7 } filernumraiddisks OBJECT-TYPE

7 DESCRIPTION "Number of RAID disks detected" ::= { filerhealth 8 } filerraiddiskerrors OBJECT-TYPE DESCRIPTION "Number of RAID disk errors detected" ::= { filerhealth 9 } -- CIFS,NFS,FTP,ISCSI Stats (.1.103,.1.104,.1.105,.1.109) filercifs OBJECT IDENTIFIER ::= { filer 103 } filernfs OBJECT IDENTIFIER ::= { filer 104 } filerftp OBJECT IDENTIFIER ::= { filer 109 } fileriscsi OBJECT IDENTIFIER ::= { filer 105 } filertotalshares OBJECT-TYPE DESCRIPTION "Total number of shares available on this Filer" ::= { filercifs 1 } filertotalsharelocks OBJECT-TYPE DESCRIPTION "Total number shares locks on this Filer" ::= { filercifs 2 } filertotalshareclients OBJECT-TYPE DESCRIPTION "Total number share clients connected to this Filer" ::= { filercifs 3 } filertotalexports OBJECT-TYPE DESCRIPTION "Total number of exports available on this Filer" ::= { filernfs 1 } filertotalftpdirs OBJECT-TYPE

8 DESCRIPTION "Total number of ftp directories available on this Filer" ::= { filerftp 1 } filertotaliscsitargets OBJECT-TYPE DESCRIPTION "Total number of ISCSI targets available on this Filer" ::= { fileriscsi 1 } filertotaliscsiclients OBJECT-TYPE DESCRIPTION "Total number of ISCSI clients connected to this Filer" ::= { fileriscsi 2 } -- Mobile License Stats (.1.106) filermobile OBJECT IDENTIFIER ::= { filer 106 } filertotalmobilelicenses OBJECT-TYPE DESCRIPTION "Total number of mobile clients registered on the Filer" ::= { filermobile 1 } filernumioslicenses OBJECT-TYPE DESCRIPTION "Total number of ios mobile clients registered on the Filer" ::= { filermobile 2 } filernumandroidlicenses OBJECT-TYPE DESCRIPTION "Total number of Android mobile clients registered on the Filer" ::= { filermobile 3 } -- Services (.1.107) filerservices OBJECT IDENTIFIER ::= { filer 107 }

9 filersupportserviceenabled OBJECT-TYPE DESCRIPTION "True if support service is enabled (0=false; 1=true)" ::= { filerservices 1 } filersupportserviceconnected OBJECT-TYPE DESCRIPTION "True if a service rep is connect to the support portal (0=false; 1=true)" ::= { filerservices 2 } filersupportservicerunning OBJECT-TYPE DESCRIPTION "True if support service is running (0=false; 1=true)" ::= { filerservices 3 } filersupportservicetimeout OBJECT-TYPE UNITS "seconds" DESCRIPTION "Timeout until the support service will be disabled (0 = unlimted)" ::= { filerservices 4 } -- Network (.1.108) filernetwork OBJECT IDENTIFIER ::= { filer 108 } filercloudout OBJECT-TYPE DESCRIPTION "Cloud transmit bits/second for the last 1 minute" ::= { filernetwork 1 } filercloudin OBJECT-TYPE DESCRIPTION "Cloud recieve bits/second for the last 1 minute" ::= { filernetwork 2 }

10 filermobileout OBJECT-TYPE DESCRIPTION "Mobile transmit bits/second for the last 1 minute" ::= { filernetwork 3 } filermobilein OBJECT-TYPE DESCRIPTION "Mobile recieve bits/second for the last 1 minute" ::= { filernetwork 4 } fileruiout OBJECT-TYPE DESCRIPTION "User Interface transmit bits/second for the last 1 minute" ::= { filernetwork 5 } fileruiin OBJECT-TYPE DESCRIPTION "User Interface recieve bits/second for the last 1 minute" ::= { filernetwork 6 } filerclientsout OBJECT-TYPE DESCRIPTION "Clients transmit bits/second for the last 1 minute" ::= { filernetwork 7 } filerclientsin OBJECT-TYPE DESCRIPTION "Clients recieve bits/second for the last 1 minute" ::= { filernetwork 8 } filermigrationout OBJECT-TYPE

11 DESCRIPTION "Migration transmit bits/second for the last 1 minute" ::= { filernetwork 9 } filermigrationin OBJECT-TYPE DESCRIPTION "Migration recieve bits/second for the last 1 minute" ::= { filernetwork 10 } -- Volumes (.2) volumes OBJECT IDENTIFIER ::= { nasuni 2 } volumecount OBJECT-TYPE DESCRIPTION "Number of entries in VolumeTable" ::= { volumes 1 } volumetable OBJECT-TYPE SYNTAX SEQUENCE OF VolumeTableSchema MAX-ACCESS not-accessible DESCRIPTION "Table of Volume information" ::= { volumes 2 } VolumeTableSchema ::= SEQUENCE { volumetableindex volumetabledescription DisplayString, volumetableprovider DisplayString, volumetableprotocol DisplayString, volumetablestatus DisplayString, volumetableaccessibledata Counter64, volumetableunprotecteddata Counter64, volumetablelastsnapshotstart DisplayString, volumetablelastsnapshotend DisplayString, volumetablelastsnapshotduration volumetablelastsnapshotversion Counter64, volumetableisactive volumetableisshared volumetableisreadonly volumetableispinned volumetableisremote volumetableavenabled

12 } volumetableremoteaccessenabled volumetablequota Counter64, volumetablenumavviolations Counter64, volumetablenumfilealerts Counter64, volumetablenumexports volumetablenumshares volumetablenumftpdirs Integer32 volumetableentry OBJECT-TYPE SYNTAX VolumeTableSchema MAX-ACCESS not-accessible DESCRIPTION "Row in VolumeTable" INDEX { volumetableindex } ::= { volumetable 1 } volumetableindex OBJECT-TYPE (0..999) MAX-ACCESS not-accessible DESCRIPTION "Index column used for VolumeTable" ::= { volumetableentry 1 } volumetabledescription OBJECT-TYPE DESCRIPTION "Volume description" ::= { volumetableentry 2 } volumetableprovider OBJECT-TYPE DESCRIPTION "Volume provider" ::= { volumetableentry 3 } volumetableprotocol OBJECT-TYPE DESCRIPTION "Volume protocol" ::= { volumetableentry 4 } volumetablestatus OBJECT-TYPE DESCRIPTION "Volume status string" ::= { volumetableentry 5 } volumetableaccessibledata OBJECT-TYPE

13 DESCRIPTION "Volume accessible data" ::= { volumetableentry 6 } volumetableunprotecteddata OBJECT-TYPE DESCRIPTION "Volume data not yet protected" ::= { volumetableentry 7 } volumetablelastsnapshotstart OBJECT-TYPE DESCRIPTION "Date and time the last snapshot started (YYYY-MM-DD HH:MM:SS)" ::= { volumetableentry 8 } volumetablelastsnapshotend OBJECT-TYPE DESCRIPTION "Date and time the last snapshot ended (YYYY-MM-DD HH:MM:SS)" ::= { volumetableentry 9 } volumetablelastsnapshotduration OBJECT-TYPE UNITS "seconds" DESCRIPTION "Duration of the last snapshot" ::= { volumetableentry 10 } volumetablelastsnapshotversion OBJECT-TYPE DESCRIPTION "Last snapshot version number" ::= { volumetableentry 11 } volumetableisactive OBJECT-TYPE DESCRIPTION "True if volume is active (0=false; 1=true)" ::= { volumetableentry 12 } volumetableisshared OBJECT-TYPE

14 DESCRIPTION "True if volume is shared (0=false; 1=true)" ::= { volumetableentry 13 } volumetableisreadonly OBJECT-TYPE DESCRIPTION "True if volume is read-only (0=false; 1=true)" ::= { volumetableentry 14 } volumetableispinned OBJECT-TYPE DESCRIPTION "True if volume is pinned (0=false; 1=true)" ::= { volumetableentry 15 } volumetableisremote OBJECT-TYPE DESCRIPTION "True if volume is remote (0=false; 1=true)" ::= { volumetableentry 16 } volumetableavenabled OBJECT-TYPE DESCRIPTION "True if antivirus is enabled (0=false; 1=true)" ::= { volumetableentry 17 } volumetableremoteaccessenabled OBJECT-TYPE DESCRIPTION "True if remote access enabled (0=false; 1=true)" ::= { volumetableentry 18 } volumetablequota OBJECT-TYPE DESCRIPTION "Volume Quota (0 for disiabled quota)" ::= { volumetableentry 19 } volumetablenumavviolations OBJECT-TYPE DESCRIPTION "Number of antivirus violations found" ::= { volumetableentry 20 }

15 volumetablenumfilealerts OBJECT-TYPE DESCRIPTION "Number of file locks" ::= { volumetableentry 21 } volumetablenumexports OBJECT-TYPE DESCRIPTION "Number of volume exports" ::= { volumetableentry 22 } volumetablenumshares OBJECT-TYPE DESCRIPTION "Number of volume shares" ::= { volumetableentry 23 } volumetablenumftpdirs OBJECT-TYPE DESCRIPTION "Number of volume ftp directories" ::= { volumetableentry 24 } -- Account (.3) account OBJECT IDENTIFIER ::= { nasuni 3 } accountlicensedcapacity OBJECT-TYPE DESCRIPTION "Available licensed capacity" ::= { account 1 } accountusedcapacity OBJECT-TYPE DESCRIPTION "Used licensed capacity" ::= { account 2 } accountpercentusedcapacity OBJECT-TYPE

16 UNITS "percent" DESCRIPTION "Percent used licensed capacity" ::= { account 3 } -- Traps (.100) -- Generic traps sent with three values (type, level, message) filertrapswrap OBJECT IDENTIFIER ::= { nasuni 100 } filertraps OBJECT IDENTIFIER ::= { filertrapswrap 0 } filertraptype OBJECT-TYPE DESCRIPTION "Notification type" ::= { filertraps 1 } filertraplevel OBJECT-TYPE DESCRIPTION "Notification level (info, update, warning, error, alert)" ::= { filertraps 2 } filertrapmessage OBJECT-TYPE DESCRIPTION "Notification message" ::= { filertraps 3 } filertrap NOTIFICATION-TYPE OBJECTS { filertraptype, filertraplevel, filertrapmessage } DESCRIPTION "Notification trap from the Filer" ::= { filertraps 4 } END