IMPORTANT SAFETY INSTRUCTIONS

Transcription

1 Instuction Book

2

3 IMPORTANT SAFETY INSTRUCTIONS Whn using an lctical applianc, basic safty pcautions should alays b follod, including th folloing: This sing machin is dsignd and manufactud fo houshold us only. Rad all instuctions bfo using this sing machin. DANGER To duc th isk of lctic shock: 1. An applianc should nv b lft unattndd hn pluggd in. Alays unplug this sing machin fom th lctic outlt immdiatly aft using and bfo claning. To duc th isk of buns, fi, lctic shock, o injuy to psons: WARNING 1. Do not allo to b usd as a toy. Clos attntion is ncssay hn this sing machin is usd by o na childn. 2. Us this applianc only fo its intndd us as dscibd in this on s manual. Us only attachmnts commndd by th manufactu as containd in this on s manual. 3. Nv opat this sing machin if it has a damagd cod o plug, if it is not oking poply, if it has bn doppd o damagd, o doppd into at. Rtun this sing machin to th nast authoizd dal o svic cnt fo xamination, pai, lctical o mchanical adjustmnt. 4. Nv opat th applianc ith any ai opning blockd. Kp vntilation opnings of this sing machin and foot contoll f fom accumulation of lint, dust and loos cloth. 5. Nv dop o inst any objct into any opning. 6. Do not us outdoos. 7. Do not opat h aosol (spay) poducts a bing usd o h oxygn is bing administd. 8. To disconnct, tun all contols to th off ( O ) position, thn mov plug fom outlt. 9. Do not unplug by pulling on cod. To unplug, gasp th plug, not th cod. 10. Kp fings aay fom all moving pats. Spcial ca is uid aound th sing machin ndl and/o cutting blad. 11. Alays us th pop ndl plat. Th ong plat can caus th ndl to bak. 12. Do not us bnt ndls. 13. Do not pull o push fabic hil stitching. It may dflct th ndl causing it to bak. 14. Sitch this sing machin off ( O ) hn making any adjustmnt in th ndl aa, such as thading th ndl, changing th ndl, thading th bobbin o changing th pss foot, and th lik. 15. Alays unplug this sing machin fom th lctical outlt hn moving covs, lubicating, o hn making any oth adjustmnts mntiond in this on s manual. SAVE THESE INSTRUCTIONS Fo Euop only: This applianc can b usd by childn agd fom 8 yas and abov and psons ith ducd physical, snsoy o mntal capabilitis o lack of xpinc and knoldg if thy hav bn givn supvision o instuction concning us of th applianc in a saf ay and undstand th hazads involvd. Childn shall not play ith th applianc. Claning and us maintnanc shall not b mad by childn ithout supvision. Fo outsid Euop (xcpt U.S.A and Canada): This applianc is not intndd fo us by psons (including childn) ith ducd physical, snsoy o mntal capabilitis, o lack of xpinc and knoldg, unlss thy hav bn givn supvision o instuction concning us of th applianc by a pson sponsibl fo thi safty. Childn should b supvisd to nsu that thy do not play ith th applianc. Plas not that on disposal, this poduct must b safly cycld in accodanc ith lvant National lgislation lating to lctical/lctonic poducts. If in doubt plas contact you tail fo guidanc. (Euopan Union only) 1

4 ESSENTIAL PARTS Nams of Pats Emboidy unit cas... 5 Standad Accssois Accssoy Stoag... 8 Extnsion Tabl... 8 F-am sing... 8 GETTING READY TO SEW Conncting th Po Supply... 9 Opating Instuctions:... 9 Contolling Sing Spd Foot Contol Machin Opating Buttons...11 Touch Panl Kys Winding th Bobbin Insting th Bobbin Thading th Machin Built-in Ndl Thad Daing up th Bobbin Thad Rplacing Ndls Fabic and Ndl Chat Rplacing th Pss Foot Rmoving and Attaching th Foot Hold Attaching th Dual Fd Foot Attaching th Daning Foot PD-H Attaching th Emboidy Foot P Attaching th Couching Foot PC-1 o PC Rplacing th Ndl Plat Raising and Loing th Pss Foot Kn Lift Dopping th Fd Dog ORDINARY SEWING MODE Odinay Stitch Pattns Function Kys in Odinay Sing Mod Utility Stitchs Staight Stitchs Sing fom th Edg of Thick Fabic Changing Sing Diction Tuning a Sua Con Scuing Sams Cutting Thads Ndl Plat Guids Vaity of Staight Stitchs Sing ith th Dual Fd Dvic Zigzag Stitchs Vaity of Ovcasting Stitchs Manual Stitch Sttings Adjusting Thad Tnsion Adjusting Foot Pssu Contol Foot up fo Pivoting Favoit Stitch Adjustmnt Cloth Guid Oth Utility Stitchs Vaity of Buttonhols B1 Snso (Sua) Buttonhol Using th Stabiliz Plat B2 Automatic (sua) Buttonhol Oth Buttonhols B11 Wltd Buttonhol (Bound Buttonhol) Codd Buttonhol TABLE OF CONTENTS 2 Spciality Stitchs B13 Daning B15, B16 Eylt Dcoativ Stitchs Dcoativ Stitch Goups Quilting(Q) Using th Quilting Guid Ba Q1-Q3 Patchok Picing Angl Scals on th Ndl Plat Q54-Q55 Hand-look uilt stitchs S1-S20 Dcoativ Satin Stitchs Elongation Ratio Taping Catd Stitchs(CS) Tin Ndl Sing Pogamming a Pattn Combination Mio Imag of Pattns Bidg Stitchs Editing a Pattn Combination Dlting a Pattn Insting a Pattn Statov Ky Chcking Pattn Combination Lngth Monogamming Function Kys Manual Thad Tnsion Individual Thad Tnsion Adjustmnt Unifid Thad Tnsion Adjustmnt Spacing Rducing th Siz of Ltts Pogamming a Monogam Saving a Pattn Combination Opning a Pattn Combination...74 Sing Application Sing Applications Saming Ovdg Blind Hm Shll Tuck Rolld Hm Zipp Sing Concald Zipp Sing (optional) Gathing Basting Button Sing Tacking Appliu Patchok Quilting Staight Stitchs (ith dual fd) Clasp Stitchs F Quilting On Stitch Off Foot Hight fo F Motion Quilting Sculptu Stitchs Hand-look Quilt Stitchs Vaiabl Zigzag Maximum Zigzag Width Adjustmnt... 93

5 CUSTOMIZING MACHINE SETTINGS Machin Stting Mod Common Stting Mod Odinay Sing Stting Mod Wi-Fi Stting Mod Languag Slction Mod Cocting Distotd Stitch Pattns EMBROIDERY MODE Emboidy Unit Attaching th mboidy unit Extnding th caiag am Dtaching th mboidy unit Attaching th Emboidy Foot Attaching th Staight Stitch Ndl Plat Spcial Bobbin Hold fo Emboidy Emboidy Hoops Stabilizs Typs of th stabilizs Stting th Fabic in an Emboidy Hoop Attaching th Emboidy Hoop to th Machin Thad Hold Slcting Built-in Emboidy Dsigns Monogamming Function kys Pogamming a monogam Monogam placmnt Ltt monogam Editing a monogam Rady to S Windo Function kys Pattn infomation Stitch back/foad kys Jump ky Coss mak Colo sction ky Tac ky Thad colo/jog ky Fin position/angl adjustmnt ky Rotating a dsign Moving a dsign Colo list ky Adjust ky Hoop back ky Emboidy foot ky Stating to S Emboidy Editing Mod Slcting a hoop siz Opning th mboidy dsigns Editing tool ba infomation Slcting a pattn Moving a pattn Zooming in th diting indo Duplicating a pattn Dlting a pattn Rsizing a pattn Rotating a pattn Flipping a pattn Monogamming in an ac Sing od Cnt positioning Con layout Customizing th display colos Gouping pattns Colo gouping Singl colo sing Emboidy Lac Dsigns Placmnt guids of Dsigns fo fabic Lac Dsign RE20a Conncting Lac Dsign RE20a-1 (Dsigns fo at solubl stabiliz) F Am Emboidy Couching Dsigns CUSTOMIZING EMBROIDERY MODE SETTINGS Emboidy Mod Sttings Saving and Opning a Fil Cating a n fold Dlting a fil o fold Opning a fil Changing a nam of th fil o fold Dict PC-Link CARE AND MAINTENANCE Claning th Hook Aa Poblms and Waning Signals Toublshooting STITCH CHART Odinay Sing DESIGN CHART Emboidy

6 !2!3 #7!1!0 t o y ESSENTIAL PARTS Nams of Pats Thad tak-up lv Rfnc chat Top cov Touch panl stylus hold t Foot stoag compatmnt y Bobbin thad cutt B u Bobbin ind spindl i Bobbin thad cutt A o Hol fo xta spool pin!0 Spool pin!1 Spool hold (lag)!2 Fac cov!3 Thad cutt!4 Extnsion tabl (accssoy stoag)!5 Ndl plat las lv!6 Stat/stop button!7 Rvs button!8 Auto-lock button!9 Ndl up/don Pss foot lift Thad cutt Fd balancing Kn lift Spd contol Visual touch Lo thad Ndl clamp Zigzag foot A #0 Ndl plat #1 Hook cov las button #2 Hook cov plat #3 Fd dog #4 Foot hold #5 Stsc #6 Ndl thad #7 Buttonhol lv #4 #3 #2 #1 #0 To cay th sing machin, hold th caying handl ith you hand, and suppot th sing machin ith th oth hand. Sing machin dsign and spcifications a subjct to chang ithout pio notic. 4

7 Caying handl Handhl Dual fd balancing dial!3 t Thad cutt sitch jack* USB pot (typ B)!2 y u i USB pot (typ A) Dop fd lv Machin sockt o Foot contol jack!0!1 Po sitch Cov t y u i o!0!1!2!3!4!5!6!7 Pss foot lift Dual fd div Emboidy unit sockt Emboidy unit Caiag am Caiag am las lv!4 * Thad cutt sitch is th optional itm.!5!7!6 Emboidy unit cas To us: Opn th flaps. Attach th suppot as shon. Plac th mboidy unit as shon so th suppot pvnts th mboidy unit says insid th cas hil caying. Flaps Suppot Emboidy unit 5

8 t y u #0 Standad Accssois t y u Zigzag foot A (st on th machin) Ovdg foot M Satin stitch foot F Blind hmming foot G Zipp foot E Automatic buttonhol foot R Stabiliz plat Rolld hm foot D Opn to satin stitch foot F2 Daning foot PD-H F motion uilting closd-to foot QC F motion uilting opn-to foot QO F motion uilting zigzag foot QV Button sing foot T 1/4 sam foot O Dual fd hold (tin) Dual fd hold (singl) Dual fd foot AD (tin) Dual fd foot VD (singl) Dual fd uilt picing foot OD (tin) AcuFd opn to foot UD (tin) Dual fd zipp foot ED (singl) Emboidy foot P Couching foot PC-1 Couching foot PC-2 Yan guid ba Yan guid #2 #3 #4 #6 #7 #9 $0 #8 #1 #0 #1 #2 #3 #4 #5 #6 #7 #8 #9 $0 $1 $2 $3 Staight stitch ndl plat Bobbin x 5 (1 st on th machin) Ndl st Additional spool pin Scdiv Lint bush Sam ipp (buttonhol opn) Quilting guid ba Spool hold (lag) X 2 (1 st on th machin) Spool hold (small) X 2 Spool hold (spcial) X 2 Bobbin hold clan Button shank plat Scissos Touch panl stylus Cloth guid $1 $2 6

9 Standad Accssois t t y u i o!0!1!2!3!4!5!6!7!8 Emboidy hoop SQ14a (ith tmplat) Emboidy hoop RE20a (ith tmplat) Emboidy hoop FA10a (ith tmplat) Bobbin hold fo mboidy Magntic clamps (X4) Flt Stabilizs Bobbin thad fo mboidy USB cabl Po supply cabl* Instuction book Quick chats Kn lift Foot contol Emboidy unit cas Smi-had fabic cov Instuctional vido DVD Acutools S CD-ROM y o u i!0!1!2!3!4!5!6!7!8 7 *Th po supply cabl includd may diff fom th illustation.

10 Accssoy Stoag Th accssois can b convnintly stod in th compatmnt of th xtnsion tabl and th compatmnt und th top cov. To sto th accssois in th compatmnt of th xtnsion tabl, push up th cov toads you to opn th accssoy stoag. Pss foot Buttonhol stabiliz plat Automatic buttonhol foot R Dual fd foot AD (tin) t Staight stitch ndl plat y Bobbin u Exta spool pin Oth accssois can b also stod in th compatmnt in th xtnsion tabl. t y u Extnsion Tabl Th xtnsion tabl povids an xtndd sing aa and can b movd fo f-am sing. Extnsion tabl F-am To dtach: Da th tabl out to th lft. To attach: Slid th tabl on th bas and push th tabl to th ight. F-am sing F-am sing is usd fo stitching slvs, aistbands, pant lgs o any oth tubula gamnts. It is also usful fo daning socks o mnding kns o lbos. F-am 8

11 z c GETTING READY TO SEW Conncting th Po Supply z Fist mak su th po sitch is off. x Inst th machin plug of th po supply cabl into th machin sockt. c Inst th po supply plug into th all outlt t, and tun th po sitch on. Po sitch Machin plug Machin sockt Po supply plug t Wall outlt t Mak su to us th po supply cabl that cam ith th machin. If you tun off th po sitch, ait fo 5 sconds bfo tuning it on again. WARNING: Whil in opation, alays kp you ys on th sing aa, and do not touch any moving pats such as th thad tak-up lv, handhl o ndl. Alays tun off th po sitch and unplug th machin fom th po supply: - hn laving th machin unattndd. - hn claning th machin. Do not plac anything on th foot contol. t z v y u If you ish to us th foot contol, pull out th cod fom th foot contol and inst th pin conncto into th jack on th machin. z Fist mak su th po sitch is off. x Inst th machin plug of th po supply cabl into th machin sockt. c Da out th cod fom th foot contol and inst th pin conncto into th jack t on th machin. v Inst th po supply plug y into th all outlt u, and tun th po sitch on. Po sitch Machin plug Machin sockt Pin conncto t Jack y Po supply plug u Wall outlt Th stat/stop button dos not ok hn th foot contol is connctd. Opating Instuctions: Th symbol O on a sitch indicats th off position of th sitch. Fo th U.S.A. and Canada only Polaizd plug (on blad id than th oth): To duc th isk of lctic shock, this plug is intndd to fit in a polaizd outlt only on ay. If it dos not fit fully in th outlt, vs th plug. If it still dos not fit, contact a ualifid lctician to install th pop outlt. Do not modify th plug in any ay. c 9

12 Contolling Sing Spd Spd contol slid You can limit th maximum sing spd ith th spd contol slid accoding to you sing nds. To incas th sing spd, mov th slid to th ight. To dcas th sing spd, mov th slid to th lft. Foot Contol Pssing on th foot contol can vay sing spd. Th had you pss th foot contol, th fast th machin uns. Th machin uns at th maximum spd st by th spd contol slid hn th foot contol is fully dpssd. This machin is uippd ith an automatic shutdon safty fatu to pvnt ovhating hnv th machin is unning ovloadd. Follo th safty instuctions that appa on th visual touch scn. Cod stoag Th cod of th foot contol can b convnintly stod in th cod stoag und th bas cov of th foot contol. Bas cov Cod Hooks Opating Instuctions: Foot contol modl is fo us ith this sing machin. 10

13 i Auto-lock button Whn stitch pattn U1, U4, U8-U10, Q1-Q3, BR1-BR5 o D1 is slctd; U: Q: BR: D: u Machin Opating Buttons Stat/stop button Pss this button to stat o stop th machin. Th machin stats unning sloly fo th fist f stitchs, it thn uns at th spd st by th spd contol slid. Th machin uns sloly as long as this button is pssd. Th button ill tun d hn th machin is unning, and gn hn it has bn stoppd. Pssing and holding this button hil sing ill slo don th sing spd and th machin ill stop hn th button is lasd. Th stat/stop button cannot b usd hn th foot contol is connctd to th machin. You can slct th dsid stat-up spd fom slo, mdium o high (f to pag 98). Rvs button Whn stitch pattn U1, U4, U8-U10, Q1-Q3, BR1-BR5 o D1 is slctd; U: Q: BR: Th machin ill s in vs as long as th vs button is pssd. Rlas th button to s foad. Whn th machin is stoppd and foot contol is disconnctd, th machin ill s in vs sloly as long as th vs button is pssd. Rlas th button to stop th machin. Whn any oth stitchs a slctd; If you pss th vs button hn sing any oth pattns, th machin ill immdiatly s locking stitchs and automatically stop. Th ill b paticula functions of th vs button hn stitch pattn U2, U3, B2, B13, o B14 is slctd. Rf to pags 32, 48, 54 and 88 fo instuctions. t D: y Pss th auto-lock button to s a locking stitch immdiatly. Th machin ill automatically stop. Whn th machin is stoppd, pss th auto-lock button to blink th LED signal u. Th machin ill immdiatly s locking stitchs and automatically stop hn th machin is statd. Whn any oth stitchs a slctd; Pss th auto-lock button to s a locking stitch at th nd of cunt pattn. Th machin ill automatically stop. Whn th machin is stoppd, pss th auto-lock button to blink th LED signal u. Th machin ill s a locking stitch at th nd of th cunt pattn and automatically stop hn th machin is statd. Th machin ill tim th thads automatically aft locking th stitch hn th auto thad cutting is tund on (f to pag 101). Ndl up/don button Pss this button to bing th ndl ba up o don. Th machin ill stop ith th ndl in don position. Hov, you can chang th ndl stop position in th machin stting mod (f to pag 98). t Pss foot lift button Th pss foot ill go up o go don by pssing this button. You can also us th pss foot lift and kn lift to ais and lo th pss foot (f to pag 25). y Thad cutt button Aft finish sing, pss this button to tim th thads. Th ndl ba automatically iss aft timming th thads (f to pag 31). Th LED signal i blinks hn th machin tims thads. Th thad cutt button dos not function: - dictly aft tuning on th po. - hn th pss foot is aisd ith th foot lift. - aft bing pssd 3 tims in a o. Us th thad cutt on th fac cov if th thad is #30 o thick (f to pag 31). 11

14 Touch Panl Kys t y CAUTION: Do not pss th touch panl o visual touch scn ith had o shap objcts lik pncils, scdivs o th lik. Us th touch panl stylus includd in th standad accssois. Hom ky Pss this ky to nt th catgoy slction of th slctd mod (odinay sing mod o mboidy mod). Mod sitch ky Pss this ky to nt into mboidy mod o to tun to odinay sing mod. Opn fil ky Pss this ky and th opn fil indo ill opn. You can opn pattn combinations, monogams and mboidy dsigns savd in th machin s intnal mmoy o on a USB flash div. St mod ky Pss this ky to nt th stting mod. You can customiz th machin sttings to you pfnc. Th machin sttings fo common sttings, odinay sing, mboidy, Wi-Fi * and languag slction a availabl in this mod. u i u t Hlp ky Pss this ky to vi th stp-by-stp visual guid about th ssntial pats. y Lockout ky Pss this ky to lockout th machin hn thading th machin, placing th accssois tc. To duc th isk of injuy, all th buttons xcpt th lock ky and pss foot lift button a dactivatd. To unlock th machin, pss this ky again. u Pag kys Pss th pag ky to display th nxt pag o pvious pag. Pss and hold th pag ky to tun th pags continuously. i Touch ba Pss on th ba and slid to th ight o lft to display th nxt pag o pvious pag. 12

15 Winding th Bobbin Rmoving th Bobbin Slid th hook cov las button to th ight, and mov th hook cov plat. Hook cov las button Hook cov plat Lift out th bobbin fom th bobbin hold. Bobbin Us th J plastic bobbins fo hoizontal hook (makd ith J ). Using oth bobbins, such as p-ound pap bobbins, may caus stitching poblms and/ o damag to th bobbin hold. Stting th spool of thad Lift up th spool pin. Plac th spool of thad on th spool pin. Attach th lag spool hold, and pss it fimly against th spool of thad. Lag spool hold Us th small spool hold to hold nao o small spools of thad. Small spool hold t Us th spool hold (spcial) to hold th spcific siz of th spool of thads as shon. Th sizs of th spools of thad a as follos; Th hol diamt of th spool has a ang of 3/8 to 7/16 (9.5 to 10.5 mm)), and th spool lngth has a ang of 2 3/4 to 3 (70 to 75 mm). Spool hold (spcial) Hol diamt (3/8 to 7/16 ) t Spool lngth (2 3/4 to 3 ) Fimly inst th spool hold (spcial) into th hol and hold th spool as illustatd. Exta spool pin Us th xta spool pin hn you nd to ind a bobbin ithout unthading th machin hil oking on a sing pojct. Inst th xta spool pin into th hol as shon. Plac a spool of thad on th xta spool pin and fix th spool ith th spool hold. Exta spool pin Hol fo xta spool pin Lag spool hold Th xta spool pin is also usd fo tin ndl sing. 13

16 Winding th bobbin St th spd contol slid at th fastst position (f to pag 10). z x z Pull th thad fom th spool. Hold th thad ith both hands and pass th thad into th guid slot. Da th thad to th lft and foad aound th thad guid. Da th thad to th a and to th ight aound and und th guid plat. Guid slot Thad guid Guid plat x Fimly pull th thad to th ight hil holding it ith both hands. c t v c Put th bobbin on th bobbin ind spindl t. Bobbin t Bobbin ind spindl v Pass th thad to th bobbin. Hold th thad ith both hands and ind it aound th bobbin clockis sval tims. b n b Inst th thad into on of th slits u of th flang plat y and pull th thad to cut. y Flang plat u Slit n Push th bobbin to th ight. Th visual touch scn ill sho th bobbin inding sign. m u y, m Stat th machin. Stop th machin hn th bobbin is fully ound and stops spinning. Rtun th bobbin ind spindl to its oiginal position., Rmov th bobbin. Cut th thad ith bobbin thad cutt B i. i Bobbin thad cutt B i Fo safty puposs, th machin ill automatically stop 1.5 minuts aft stating bobbin inding. 14

17 z Insting th Bobbin z Pss th lockout ky. Plac a bobbin in th bobbin hold ith th thad unning off countclockis as shon on th hook cov plat. Lockout ky End of thad Bobbin hold Hook cov plat x t x Hold th bobbin ith you fingtip so it dos not otat. Guid th thad into th font notch of th bobbin hold. Pull th thad to th lft to pass it und th guid. t Font notch y Guid y c u c Da th thad to th lft to pass it into th guid path makd 1. Mak su that th thad coms out fom th sid notch of th bobbin hold. u Guid path 1 i Sid notch Coct i Wong If th thad dos not com out fom th sid notch, thad fom stp z. i i v o!0 v Continu to da th thad along th guid path makd 2 and pull th thad to th ight though th slit. Th thad ill b cut to a pop lngth and hld in plac. o Guid path 2! 0 Slit (Thad cutt) b b St th lft dg of th hook cov plat into opning. Push don th hook cov plat to fit in plac. Unlss othis notd, you can stat sing ithout daing up th bobbin thad. Rf to pag 18 fo ho to da up th bobbin thad. 15

18 Thading th Machin v x z CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo thading th machin. b Pss th ndl up/don button to ais th tak-up lv to th highst position. Pss th lockout ky to lockout th machin. Th pss foot ill go don and th upp thad tnsion disks ill opn. Lockout ky c Pass th thad in od z to m. z Hold th thad ith both hands and pass th thad into th guid slot. Guid slot n m z x x Hold th thad ith both hands and da th thad aound th con of th guid. Fimly pull th thad toad you along th ight channl until th thad snaps. Con of th guid Right channl c Da th thad don along th ight channl and aound th bottom of th thad guid plat. Pull th thad up along th lft channl. Right channl t Thad guid plat y Lft channl c v u v Whil holding th thad at th spool, fimly da th thad up and to th back of th tak-up lv. Da th thad foad to da it into th y of th takup lv. u Ey of th tak-up lv y t bnm b Thn pull th thad don along th lft channl and though th lo thad guid. i Lo thad guid i n Slid th thad fom th ight of th ndl ba thad guid to th lft. o Ndl ba thad guid o m Thad th ndl ith th ndl thad (f to th nxt pag). 16

19 z Built-in Ndl Thad Th ndl thad can b usd ith a #11 to #16 ndl. Thad siz 50 to 90 is commndd. Do not us thad siz 30 o thick. Th ndl thad cannot b usd ith th tin ndl. x z Pss th ndl up/don button to ais th ndl. Pss th lockout ky to lock th machin. Ndl up/don button Lockout ky x Da th thad though th slit of th ndl thad. Th thad should pass und th hook. Slit Hook c c Pull th thad up and slip it btn th thad cutt and fac plat fom bhind. Pull th thad toad you to cut. v v Pull don th ndl thad knob as fa as it ill go. b b Rais th thad sloly so a loop of th thad is pulld up though th ndl y. n n Pull th thad loop to tak th thad nd out though th ndl y to th a. If th thad is caught in th hook and th thad loop is not fomd, mov th thad fom th hook and pull it to tak th thad nd out though th ndl y. 17

20 z Daing up th Bobbin Thad Aft using auto thad cutting o thading th bobbin hold, you can stat sing ithout daing up th bobbin thad. Hov, you nd to da up th bobbin thad hn sing gathing stitchs tc. z Rmov th bobbin. Inst th bobbin into th bobbin hold again and thad th bobbin hold accoding to th instuctions on pag 15, but lav a 10 cm (4 ) tail of bobbin thad as shon. Bobbin thad Do not cut th bobbin thad ith th thad cutt. Thad cutt x x Rais th pss foot. Hold th ndl thad lightly ith you lft hand. Ndl thad c c Pss th ndl up/don button tic to lo and ais th ndl and pick up th bobbin thad. Ndl up/don button v v Pull both thads 10 cm (4 ) und and bhind th pss foot. 18

21 Rplacing Ndls CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th ndl. Rais th ndl by pssing th ndl up/don button. Pss th lockout ky. Lockout ky Loosn th ndl clamp sc by tuning it countclockis. Rmov th ndl fom th clamp. Ndl clamp sc Inst a n ndl into th ndl clamp ith th flat sid of th ndl to th a. Flat sid Whn insting th ndl into th ndl clamp, push it up against th stopp pin and tightn th ndl clamp sc fimly ith a scdiv. To chck ndl staightnss, plac th flat sid of th ndl onto somthing flat (a ndl plat, glass tc.). Th gap btn th ndl and th flat sufac should b consistnt. Gap Nv us a blunt ndl. Fin Mdium Havy ight Fabic Thad Ndl Lan Gogtt Ticot Oganza Cp Shting Jsy Boadcloth Flc Dnim Td Coating Quilting Silk # Cotton # Synthtic # Silk #50 Cotton #50-80 Synthtic #50-80 Silk #30-50 Cotton #40-50 Synthtic #40-50 Blu tip ndl Univsal ndl #9/65-11/75 Rd tip ndl Pupl tip ndl Univsal ndl #11/75-14/90 Rd tip ndl Pupl tip ndl Univsal ndl #14/90-16/100 1 x tin ndl, 2 x blu tip ndl (#11/75), 1 x d tip ndl (#14/90) and 1 x pupl tip ndl (#14/90) a includd in th ndl cas (Pat No ). Fabic and Ndl Chat Fo gnal sing, us d ndl. Fin thads and ndls should b usd fo sing fin fabics. In gnal, us th sam thad fo both ndl and bobbin. Us a blu tip ndl fo sing fin fabics, sttch fabics, ticot and buttonhols to pvnt skippd stitchs. Us a pupl tip ndl fo sing knits, f uilting and acoss th hm to pvnt skippd stitchs. Us a stabiliz o intfac to sttch o fin fabics to pvnt sam pucking. Alays tst th thad and ndl siz on a small pic of th sam fabic you ill us fo actual sing. Fo mboidy: In gnal, us a blu tip ndl. Us a d tip ndl o pupl tip ndl fo thick fabics. Us a pupl tip ndl fo dns stitch mboidy and Quilting dsigns. Janom bobbin thad fo mboidy is commndd fo bobbin. 19

22 z Rplacing th Pss Foot CAUTION: Alays mak su to pss th lockout ky to bfo placing th pss foot. Us th pop foot fo th slctd pattn. Th ong foot can caus th ndl to bak. z Rais th ndl by pssing th ndl up/don button. Pss th lockout ky. Ndl up/don button Lockout ky x x Rais th pss foot lift. Pss foot lift c c Pss th black lv on th back of th foot hold. Th pss foot ill dop off. Lv CAUTION: To avoid damaging th lv, do not push it don. v y u v Plac th pss foot so that th pin on th foot lis just und th goov of th foot hold. Lo th pss ba to lock th foot in plac. Each foot is makd ith an idntification ltt. t Pin y Goov u Idntification ltt t 20

23 Rmoving and Attaching th Foot Hold Rmov th foot hold bfo using th dual fd foot o daning foot. CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th foot hold. Rmoving th foot hold Rais th ndl by pssing th ndl up/don button. Pss th lockout ky and ais th pss foot ith th pss foot lift. Ndl up/don button Lockout ky Pss foot lift t Loosn th stsc and mov th foot hold. Stsc t Foot hold t y Attaching th foot hold Attach th foot hold to th pss ba fom th a. Tightn th thumbsc sculy ith th scdiv. y Pss ba 21

24 z x Attaching th Dual Fd Foot z Attach th dual fd hold to th pss ba. Dual fd hold x Tightn th thumbsc ith you fings. Push th dual fd link to ngag it ith upp fd div. Dual fd link Upp fd div c c Lo th pss foot lift. Lo th ndl to th lost position by tuning th handhl. v v Tightn th thumbsc sculy ith th scdiv. Dtaching and attaching th dual fd foot Pull th foot toad you to mov it. Inst th pins of th foot into th slits of th foot hold and gntly push th foot until it snaps into plac. Pin Slit 22

25 Attaching th Daning Foot PD-H Attach th daning foot PD-H to th pss ba by putting th pin on th ndl clamp sc. Pin Ndl clamp sc Tightn th thumbsc fimly ith th scdiv. Attaching th Emboidy Foot P Attach th mboidy foot P to th pss ba fom bhind (f to pag 109). Tightn th thumbsc fimly ith th scdiv. Attaching th Couching Foot PC-1 o PC-2 Attach th couching foot PC-1 o PC-2 to th pss ba fom font (f to pag 149). Tightn th thumbsc fimly ith th scdiv. 23

26 z Rplacing th Ndl Plat Us th staight stitch ndl plat hn sing ith th dual fd foot. CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th ndl plat. Whn th staight stitch ndl plat is attachd to th machin, th pattns not suitabl fo th staight stitch ndl plat cannot b slctd. z Pss th ndl up/don button to ais th ndl. Pss th lockout ky. Pss th pss foot lift button to ais th pss foot. Ndl up/don button Lockout ky Pss foot lift button x t x Slid th xtnsion tabl to th lft to mov it. Push don th ndl plat las lv and th ndl plat ill snap off. Ndl plat las lv t Ndl plat c c A mssag ill appa aning that th ndl plat is not scud. Rmov th ndl plat to th ight. Plac th staight stitch ndl plat on th machin. St th lft dg of th ndl plat into th opning. v y v Push don on th mak of th ndl plat until it locks in plac. Mak su th aning mssag disappas and th staight stitch is automatically slctd. Tun th handhl sloly and mak su that th ndl dos not hit th ndl plat. Pss th lockout ky to unlock. y Mak CAUTION: Nv pss th ndl plat las lv hil unning th machin. 24

27 Raising and Loing th Pss Foot You can ais and lo th pss foot ith th pss foot lift button, th pss foot lift o th kn lift. Pss foot lift button Pss foot lift Exta liftd position You can ais th pss foot about 7 mm (1/4 ) high than th nomal up position by xting mo pssu hn lifting th pss foot lift o kn lift. This allos fo changing th ndl plat, and also hlps you to plac lays of thick fabics. Th pss foot cannot b lod ith th pss foot lift if th foot as aisd ith th pss foot lift button. Do not tun th handhl o pss th up/don ndl button hn th pss foot is in th xta liftd position. Kn Lift Th kn lift is xtmly hlpful hn sing patchok, uilting tc, sinc it allos you to handl th fabic hil you kn contols th pss foot. Attaching th kn lift Match th ibs on th kn lift ith th notchs in th kn lift sockt and inst th kn lift. Kn lift Rib Kn lift sockt Adjusting th kn lift Th angl of th kn lift can b adjustd to fit you. Loosn th stsc and slid th angl ba in o out to adjust th angl of th kn lift. Tightn th stsc to scu th angl ba. Stsc t Angl ba t Using th kn lift Push th kn lift ith you kn to asily mov th pss foot up and don. You can contol ho high th foot iss by th amount of kn pssu you xt. 25

28 Dopping th Fd Dog Th fd dog can b lod fo sing on buttons, f motion uilting tc. Shift th dop fd lv toad you to lo th fd dog. Dop fd lv Fd dog Shift th dop fd lv aay fom you to ais th fd dog, it ill tun to th up position hn you stat th machin. If you stat th machin ith th fd dog lod, a mssag ill appa on th visual touch scn. 26

29 ORDINARY SEWING MODE Odinay Stitch Pattns In th odinay sing mod, th a 4 catgois availabl. Utility stitchs, Buttonhol and spcialty stitchs Dcoativ and uilting stitchs Monogamming Sing applications Pss on of th icon kys to slct th catgoy. In this manual, th pattn numb fs to th initial fo ach goup o catgoy. Fo xampl pattn #15 in th buttonhols and spcialty stitchs is fd to as pattn B15. Utility stitchs, Buttonhols and spciality stitchs You can slct utility stitchs (U), buttonhols and spciality stitchs (B) in this catgoy. (A) (Q) (BR) (H) (S) (D) (L) (PL) (P) (CS) Dcoativ and uilting stitchs This catgoy consists of th folloing 10 goups. Appliu stitchs (A) Hiloom stitchs (H) Quilting stitchs (Q) Satin stitchs (S) Bidg stitchs (BR) Dcoativ stitchs (D) Long stitchs (L) Pictogaph stitchs (P) Play stitchs (PL) Catd Stitchs (CS) Monogamming You can pogam ltting as ll as a combination of chaacts. 27

30 Sing applications You can slct th appopiat stitch fo a spcific sing pojct and fabic typ fom th dsignatd application in this catgoy. Function Kys in Odinay Sing Mod Foot-up ky If this option is tund on, th ndl stops at th don position and th pss foot ill automatically go up hn th machin stops. Pss this ky to tun this option on o off (f to pag 37). Tin ndl ky Pss this ky to st th stitch idth fo tin ndl sing (f to pag 65). Dual fd ky Pss this ky fo dual fd sing (f to pag 33). Statov ky If you stop sing in th middl of a stitch pattn and ish to s th pattn again fom th bginning, pss this ky bfo you stat sing. Pss this ky onc to statov fom th bginning of th cunt pattn, o pss this ky tic to statov fom th bginning of th fist pattn of th combination (f to pag 68). t y u t Vtical mio imag ky Pss this ky to s a vtical mio imag of th slctd pattn (f to pag 66). y Hoizontal mio imag ky Pss this ky to s a hoizontal mio imag of th slctd pattn. Th ky is gayd out if th slctd pattn cannot b tund ov (f to pag 66). u Taping ky Pss this ky to opn th dialog box fo taping (f to pag 63). 28

31 !1 i o!0 i Pogam ky Pss this ky to pogam a pattn combination. Whn this ky is pssd, th dlt ky, sav fil ky and cuso kys ill appa. o Dlt ky Pss this ky to dlt th pattn fom th pattn combination.!0 Sav fil ky Pss this ky to sav th pattn combination as a fil.!1 Cuso kys Pss on of th cuso kys to mov th cuso up o don.!1!2!3!2 Ltt siz ky Pss this ky to slct th full siz (L) o small siz (S).!3 Ltt cas ky Pss this ky to slct upp cas o lo cas fo monogams.!4!5 Hiagana/Kanakana ky and ltting ointation ky a availabl hn Japans chaacts (Mincho (9 mm) o Maumoji (9 mm)) a slctd.!4 Hiagana/Katakana ky Pss this ky to slct Hiagana o Katakana font.!5 Ltting ointation ky Pss this ky to slct th hoizontal o vtical ointation. 29

32 Utility Stitchs Staight Stitchs Pattns U1 to U5 a staight stitchs fo saming. Pss th pattn slction ky fo th dsid stitch. Stating to s Plac th fabic nxt to th sam guid lin on th ndl plat. Lo th ndl to th point h you ant to stat. Pull th ndl thad toads th a and lo th foot. Pull th ndl thad to th lft hn using satin stitch foot F, opn-to satin stitch foot F2, dual fd foot o automatic buttonhol foot R. Pss th stat/stop button o foot contol to stat sing. Gntly guid th fabic along th sam guid lin ltting th fabic go natually. Stat/stop button Sing fom th Edg of Thick Fabic Th black button on th zigzag foot locks th foot in th hoizontal position. This is hlpful hn you stat sing at th xtm dg of thick fabics o fo sing acoss a hm. Lo th ndl into th fabic at th point h you ish to stat sing. Lo th foot hil pushing in th black button. Th foot is lockd in th hoizontal position to avoid slipping. Aft a f stitchs, th black button is lasd automatically. Black button Changing Sing Diction Stop th machin and pss th pss foot lift button to ais th pss foot. Pivot th fabic aound th ndl to chang th sing diction as dsid. Stat sing in a n diction. If you tun on th foot up option, th pss foot ill automatically go up hn th machin stops (f to pag 37). 5/8 Tuning a Sua Con To maintain a 5/8 sam alloanc aft tuning a sua con, us th coning guid on th ndl plat. Stop sing hn th font dg of fabic achs th coning guid lins. Pss th foot lift button and tun th fabic 90 dgs. Stat sing in th n diction. Coning guid 30

33 Scuing Sams Fo fastning th nds of sams, pss th vs button and s sval vs stitchs. Th machin ss in vs as long as you pss and hold th vs button. Rvs button Pss th vs button onc hn sing th locka-matic stitch (pattn U2) o locking stitch (pattn U3) and th machin ill lock th stitchs off and stop automatically. Cutting Thads To cut th thads aft finishing sing, pss th thad cutt button. Th ndl ba and pss foot ill automatically go up aft timming th thads. Thad cutt button Th thad cutt button dos not function hn th pss foot is aisd ith th pss foot lift o th LED signal is tund off. Us th thad cutt on th fac plat to cut spcializd o thick thads if th auto thad cutt dos not ok ll. LED signal To us th thad cutt on th fac plat, mov th fabic and da it to th back. Pull th thads up and slip thm btn th thad cutt and fac plat fom bhind. Pull th thads toad you to cut. Thad cutt Ndl Plat Guids Th sam guids a makd on th ndl plat, f am and hook cov. Th sam guids fo 1/4, 3/8 and 5/8 a also makd on th font of th ndl plat. Sam guids on th font of th ndl plat Th numbs on th ndl plat indicat th distanc fom th cnt ndl position in millimts and inchs. Cnt ndl position Th coning guids a vy usful hn tuning a sua con. Coning guid Th angl scals on th ndl plat a usful fo patchok picing (f to pag 61). Angl scals 31

34 Vaity of Staight Stitchs U1 Staight stitch in cnt ndl position Us this stitch fo saming, olld hmming tc. U2 Lock-a-matic stitch Us this stitch to scu th bginning and th nd of a sam ith backstitching. Whn you ach th nd of th sam, pss th vs button onc. Th machin ill s fou vs stitchs, fou foad stitchs, and thn stop sing automatically. U3 Locking stitch This uniu stitch is usd h an invisibl locking stitch is ndd. Th machin ill s sval locking stitchs at th bginning and continu sing foad. Whn you pss th vs button at th nd of th sam, th machin ill s sval locking stitchs in plac, thn stop sing automatically. U4 Staight stitch in lft ndl position Us this stitch to sam fabics clos to th dg. U5 Tipl sttch stitch This stong, duabl stitch is commndd fo aas h both lasticity and stngth a ndd to nsu comfot and duability. Us it to infoc aas such as cotch and amhol sams. Also us it hn constucting itms such as backpacks fo xta stngth. U6, U7 Sttch stitchs Ths a nao sttch stitchs dsignd to liminat pucking on knit fabics and bias sams, hil pmitting th sam to b pssd compltly opn flat. Us U7 fo saming fin fabics o sttch fabics. 32

35 y Sing ith th Dual Fd Dvic Pattns U1 to U5 and Q1 to Q7 can b sn ith th dual fd dvic. Th dual fd dvic is xtmly ffctiv hn sing had to fd matials such as PVC coatd fabic o lath. It also liminats lay slippag. Th folloing 5 typs of dual fd ft a availabl in th standad accssois. Dual fd foot AD (tin): Fo gula sing ith dual fd Dual fd foot VD (singl): Fo sing nao aas ith dual fd Dual fd uilt picing foot OD (tin): Fo 1/4 sam picing ith dual fd Dual fd zipp foot ED (singl): Fo zipp application ith dual fd t Dual fd AcuFd opn to foot UD (tin): Fo opn to btt vi sing ith dual fd Attach th dsid dual fd foot to th spctiv dual fd hold and attach to th machin (f to pag 22). Pss th dual fd ky y and slct th dsid pattn. Th pattns not suitabl fo dual fd sing a gayd out. Th dual fd ky ill gay out o not b indicatd if you slctd a pattn not suitabl fo dual fd sing. t Plac th fabic und th foot and lo th ndl at th point h you ish to stat. Stat sing at mdium spd. Whn saming plaid fabics, match th plaids of th upp and lo lays and pin thm togth. Rmov th pins as you s. (A) Dual fd balancing dial Th dual fd balancing dial should b st at 0, hov you may nd to adjust th dual fd balanc dpnding on th typ of fabic. Chck th fd balanc by tst sing on a scap pic of th fabic you intnd to us. (A): If th lo lay pucks, tun th dual fd balancing dial toad +. (B) 33 (B): If th upp lay pucks, tun th dual fd balancing dial toad. Upp lay Lo lay Dual fd balancing dial

36 U11 Basting S pag 86 fo sing instuctions. Zigzag Stitchs U8, U9 Zigzag stitchs Zigzag stitchs a usd fo vaious sing nds including ovcasting. Ths stitchs can b usd on most ovn fabics. A dns zigzag stitch can also b usd fo appliu. U10 Multipl zigzag stitchs Ths stitchs a usd fo mnding tas. 34

37 Vaity of Ovcasting Stitchs U10 Multipl zigzag stitch: Zigzag foot A This stitch is usd to finish a a dg of synthtics and oth sttch fabics that tnd to puck. S along th fabic dg laving an aduat sam alloanc. Aft sing, tim off th sam alloanc clos to th stitchs. U13 Ovcasting stitch: Ovdg foot M This stitch can b usd to simultanously sam and ovcast dgs of fabics. Us this stitch hn you do not nd to opn sams flat. Plac th fabic dg nxt to th guid of th foot and s. U14 Knit stitch: Ovdg foot M This stitch is commndd fo sing such fabics as synthtic knits and sttch vlou as it povids th gatst amount of lasticity and stngth. Plac th fabic dg nxt to th guid of th foot and s. Fo btt sults, us th zigzag foot A and s laving an aduat sam alloanc. Aft sing, tim th sam alloanc clos to th stitchs. U15 Doubl ovdg stitch: Ovdg foot M This stitch is xcllnt fo fabics that tnd to fay xtnsivly such as linns and gabadins. Plac th fabic dg nxt to th guid of th foot and s. To os of zigzag stitchs a simultanously sn ov th dg to insu that th fabic ill not avl. U16 Ovlock stitch: Ovdg foot M This stitch finishs th dgs of fabic in a ay simila to a commcial ovlocking machin fo a pofssional look. Plac th fabic dg nxt to th guid of th foot and s. 35

38 Manual Stitch Sttings You can alt th stitch idth (o ndl dop position of th staight stitchs) and stitch lngth. Pss th + o ky bsid th stting you ish to chang. Pss dfault ky to cov th oiginal stitch stting. Whn you pss th stting ba, th manual stting indo xpands to sho mo options. You can alt oth sttings such as ndl thad tnsion and pss foot pssu valu, dpnding on th slctd stitch pattn. Pss th stting ba again to shink th manual stting indo. Stting ba Manual stting indo Dfault ky Alting ndl dop position (staight stitchs) Pss th + ky to mov th ndl dop position to th ight. Pss th ky to mov th ndl dop position to th lft. ( ) (4.5) (+) ( ) (3.0) (+) Alting stitch idth Pss th + ky to incas th stitch idth. Pss th ky to dcas th stitch idth. Th adjustabl ang of pattns U6-U10 is 0.0 to 7.0. Alting stitch lngth Pss th + ky to incas th stitch lngth. Pss th ky to dcas th stitch lngth. ( ) (+) ( ) (+) Th adjustabl ang of pattns U6 is 0.0 to 5.0, U7 is 1.0 to 5.0, U8-U10 is 0.0 to

39 Adjusting Thad Tnsion This machin is uippd ith automatic thad tnsion contol, hich optimizs th tnsion balanc fo th slctd stitch pattn. Balancd thad tnsion Staight stitch: Both ndl and bobbin thads intlock btn th lays. Zigzag stitch: Th ndl thad appas slightly on th ong sid of th fabic. Hov you may nd to manually adjust th tnsion balanc dpnding on th sing conditions, o you can fin-tun th thad tnsion to suit you pfnc. Pss th + ky if th tnsion is too loos. Pss th ky if th tnsion is too tight. Adjusting Foot Pssu Contol Th pss foot pssu is automatically optimizd fo ach stitch pattn. Hov, you can adjust th foot pssu manually by pssing th + ky o ky to suit you spcific sing nds. Foot up fo Pivoting If this option is tund on, th pss foot ill automatically go up hn th machin stops. This fatu is vy usful hn tuning cons. Pss th foot-up ky to tun this option on o off. Foot-up ky Hight of th foot can b altd in th odinay sing stting mod (f to pag 100). 37

40 z Favoit Stitch Adjustmnt You can sav customizd stitch sttings (stitch lngth, stitch idth, thad tnsion and pss foot pssu, dpnding on th slctd stitch pattns) as Favoit Stitch Adjustmnt. Whn th favoit stitch adjustmnt option is tund ON (f to pag 101), th savd customizd stitch sttings a automatically assignd hn th stitch pattn is slctd. Favoit stitch option cannot b assignd fo catd stitch (CS). Favoit stitch option cannot b usd in monogam mod. x c Exampl: To chang th pst valu of th ndl dop position fom 4.5 to 5.0. z Tun th Favoit Stitch Adjustmnt option ON (f to pag 101). Slct stitch pattn U1. Pss th stting ba. Th manual stting indo xpands to sho mo options. x Th favoit stitch ky appas on th manual stting indo. Chang th ndl dop position fom 4.5 to 5.0 by pssing + ky. Pss th favoit ky. c Th dialog box ill opn. Pss th sav favoit ky to gist th favoit stitch sttings. v t v Th cam colod box t indicats that th customizd pst stitch valu is applid to th stting. To dlt favoit stitch sttings, pss th favoit stitch ky and pss th dlt ky. 38

41 Cloth Guid CAUTION: Alays lav sufficint spac to th lft of th machin hn using th cloth guid. Do not us th cloth guid hn th buttonhol foot R is attachd. Th xtnsion tabl cannot b opnd hn th cloth guid is in us. Attaching th cloth guid Attach th mboidy unit (s pag 106). Inst th pin on th cloth guid into th caiag hol. Tun th attaching knob clockis to scu th cloth guid. Pin Cloth guid Caiag hol Attaching knob Stting th cloth guid position Pss th stting ba to xpand th manual stting indo. Pss th cloth guid ky. t Stting ba y Cloth guid ky t y Th visual touch scn ill sho a aning mssag. Pss th OK ky. Th cloth guid adjustmnt indo ill opn. Pss th o ky to mov th cloth guid to th dsid position. Th cloth guid ill mov th distanc indicatd on th ky. Th cloth guid position is indicatd on th scal ba and th distanc fom th cnt ndl dop position is indicatd in millimts o inchs. Pss th OK ky to gist th stting and clos th cloth guid adjustmnt indo. Th machin ill not un if th cloth guid adjustmnt indo is opn. Pss th dfault ky to tun th cloth guid to th dfault position (15 mm o 5/8 ). u Dfault ky i u Mak su to tun th caiag to th stod position by pssing th cloth guid stoag ky and mov th cloth guid aft you finish sing. i Cloth guid stoag ky 39

42 Oth Utility Stitchs U12 Backad stitch U12 is backad stitch. Us th stitch if it is had to guid th fabic hil pssing th vs button. Th machin ss in vs ithout pssing th vs button so that you can guid th fabic ith both hands. U17 Hmstitch Us this stitch fo fagoting o dcoativ stitch. U18 Visibl hmming Slct pattn U18. Fold and pss a singl hm. Plac th fabic ith th ight sid up. S along th fold at th dsid dpth. Tim th xcss on th ong sid. 40

43 U19, U20 Blind Hm Rf to pags fo sing instuction. U21, U23 Shll Tuck Rf to pag 79 fo sing instuction. U22 Fagotting Us th stitch to join to pics of fabic to cat an opn ok appaanc and add stitch intst. 41

44 Vaity of Buttonhols B1 Snso (Sua) buttonhol This sua buttonhol is idly usd on mdium to havy ight fabics. Th buttonhol siz is automatically dtmind by placing a button in th foot. B2 Auto (Sua) buttonhol This is also a sua buttonhol simila to th snso sua buttonhol, but you can manually st th buttonhol siz and th machin mmoizs it to s buttonhols of th sam siz. B3 Round nd buttonhol This buttonhol is usd on fin to mdium ight fabics spcially fo blouss and childn's cloths. B4 Fin fabic buttonhol This buttonhol is oundd at both nds and is usd on fin, dlicat fabics such as fin silk. B5 Kyhol buttonhol Th kyhol buttonhol is idly usd on mdium to havy ight fabics. It is also suitabl fo lag and thick buttons. B6 Roundd kyhol buttonhol This buttonhol is usd fo thick buttons on mdium ight fabics. B7 Tailod buttonhol This duabl buttonhol is usd ith thick buttons and havy fabics. B8 Sttch buttonhol This buttonhol is suitabl fo sttch fabics. It can also b usd as a dcoativ buttonhol. B9 Knit buttonhol This buttonhol is suitabl fo knit fabics. It can also b usd as a dcoativ buttonhol. B10 Antiu buttonhol This buttonhol looks lik th hiloom stitch. It has an attactiv handmad appaanc and maks a nic dcoativ buttonhol. B11 Wltd buttonhol This is a tmplat pattn fo th hand sn ltd (bound) buttonhol. B3-B11 a snso buttonhols and th sing pocdu is th sam as fo B1. 42

45 B1 Snso (Sua) Buttonhol Th siz of a buttonhol is automatically st by placing a button in th a of automatic buttonhol foot R. Th button hold of th foot taks a button siz of 1 cm (3/8 ) to 2.5 cm (1 ) in diamt. Whn slcting th buttonhols, th visual touch scn advis you to lo th buttonhol lv. It is somtims ncssay to chang buttonhol siz to match ctain havy o spcific fabics and thads. Mak a tst buttonhol on an xta pic of th fabic to chck you sttings. Th pst idth of th buttonhol is suitd fo odinay buttons. Apply an intfacing to sttch o fin fabics. z Sing z Pull th button hold to th back, and plac th button in it. Push it togth tightly on th button. Button hold Chck th lngth of th tst buttonhol, and adjust th buttonhol lngth if ncssay by tuning th adjusting sc on th buttonhol foot. To incas th buttonhol lngth, tun th adjusting sc to mov th mak toad L. To dcas th buttonhol lngth, tun th adjusting sc to mov th mak toad S. Adjusting sc Mak x t x Pss th ndl up/don button to ais th ndl. Pss th lockout ky. Rais th pss foot and attach th automatic buttonhol foot R snapping th pin into th goov of th foot hold. You may lift th pss foot lift to th xta liftd position hn placing th automatic buttonhol foot und th foot hold. Pss th lockout ky to unlock th machin. Goov t Pin 43

46 c c Da th ndl thad to th lft though th hol of th foot. Mak th buttonhol position on th fabic and plac it und th buttonhol foot. Lo th ndl at th stating point by tuning th handhl. y Stating point v y v Lo th pss foot and pull th buttonhol lv don as fa as it ill go. u Buttonhol lv u i Mak su th is no gap btn th slid and font stopp, othis th buttonhol ill b out of position o th ill b a sing gap. i No gap o Stating point!0 Sing gap b!0!0!0 o o o b Stat sing hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. If you stat sing ithout pulling don th buttonhol lv, th visual touch scn ill sho a aning and th machin ill stop aft a f stitchs. Pull th buttonhol lv don and stat sing. 44

47 n n Th buttonhol is sn automatically in th sunc shon. Whn th buttonhol is finishd, th machin ill stop automatically ith th ndl in th up position. Pss th thad cutt button and mov th fabic. m m Aft you finish buttonhol sing, push th buttonhol lv up as fa as it ill go.,, Plac a pin just blo th batack at ach nd to pvnt accidntally cutting th thads. Cut th opning ith th sam ipp. Us an ylt punch to opn a kyhol buttonhol. Doubl lay buttonhol To mak a study buttonhol, s anoth lay of buttonhol stitchs ov th pvious stitchs. Aft th buttonhol is finishd, simply stat th machin again. Do not ais th foot o buttonhol lv. Do not slct th pattn. This function is disabld if Thad Cut aft Auto- Lock option is tund on in th odinay sing stting mod (f to pag 101). 45

48 Manual sttings Whn you pss th stting ba, th manual stting indo xpands to sho mo options. Stting ba Alting buttonhol opning idth Pss th + ky to mak th buttonhol opning id. Pss th ky to mak th buttonhol opning nao. Alting buttonhol idth Pss th + ky to incas th buttonhol idth. Pss th ky to dcas th buttonhol idth. Alting buttonhol stitch dnsity Pss th + ky to mak th buttonhol stitchs lss dns. Pss th ky to mak th buttonhol stitchs dns. 46 Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to 1.00.

49 Using th Stabiliz Plat Th stabiliz plat holds and suppots th fabic so it is hlpful hn sing buttonhols ov th hm of thick fabics. z z Inst th tab of th stabiliz plat into th slot of th buttonhol foot. Stabiliz plat Slot x x Plac th button on th button hold of th foot. Attach th buttonhol foot to th machin. Da th ndl thad to th lft btn th foot and stabiliz plat. c c Plac th fabic btn th buttonhol foot and stabiliz plat. Lo th ndl into th stating point by tuning th handhl. Lo th foot and buttonhol lv. Stat th machin hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. Th sing pocdu is xactly th sam as that fo B1 snso (sua) buttonhols. 47

50 B2 Automatic (sua) Buttonhol Pull th button hold all th ay out. Mak th buttonhol position on th fabic. Plac th fabic und th foot, and lo th ndl at th stating point. Lo th foot and stat sing hil pulling th ndl thad lightly to th lft. Aft sing a f stitchs, f th thad and continu sing. You do not nd to pull don th buttonhol lv. If you ish to s a buttonhol long than th siz pmittd by th automatic buttonhol foot R, us satin stitch foot F. Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to z z S th lft sid up to th uid buttonhol lngth and stop th machin. Thn pss th vs button. x x Stat sing again, and th machin ss back ith a staight stitch. Stop th machin hn you ach th stating point. Thn pss th vs button. 48

51 c c Stat sing again, and th machin ss th font batack and ight sid of th buttonhol. Stop th machin hn you ach th nding point. Thn pss th vs button. v v Stat sing again, and machin ss th back batack and locking stitchs thn stops automatically ith th ndl in th up position. Whn th buttonhol is finishd, a mssag ill appa. To mak th nxt buttonhol, position th fabic and stat sing again. Th mssag disappas and th machin ss anoth buttonhol idntical to th fist on thn stops automatically. To s anoth buttonhol in a diffnt siz pss th X ky on th dialog box. To cut th buttonhol opning, f to th instuctions on pag 45. Th mmoizd lngth ill b canclld if th pss foot is aisd o th statov ky is pssd bfo buttonhol is compltd. 49

52 Oth Buttonhols B3, B4 Round nd and fin fabic buttonhols Th sing pocdu is th sam as that of B1 sua (snso) buttonhol (f to pags 43-45). Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to B5-B7 Kyhol buttonhols Th sing pocdu is th sam as B1 sua (snso) buttonhol (f to pags 43-45). Us an ylt punch to opn th kyhol buttonhol. Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 5.6 to 9.0. Th stitch dnsity can b adjustd fom 0.20 to B8, B10 Sttch and Antiu buttonhols Th sing pocdu is th sam as B1 sua (snso) buttonhol (f to pags 43-45). Th sing stps a as shon. Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.50 to 1.00 (B8), fom 0.50 to 2.50 (B10). B9 Knit buttonhol Th sing pocdu is th sam as B1 sua (snso) buttonhol (f to pags 43-45). Th opning idth can b adjustd fom 0.2 to 2.0. Th buttonhol idth can b adjustd fom 2.6 to 9.0. Th stitch dnsity can b adjustd fom 0.70 to

53 B11 Wltd Buttonhol (Bound Buttonhol) A ltd buttonhol is mad by stitching a stip o patch of fabic to th buttonhol. Wltd buttonhols a paticulaly suitabl fo tailod gamnts, but a not commndd fo sh o dlicat fabics h th patch might sho though o add bulk. z z Bast a patch to th gamnt fabic ith th ight sids togth. Wong sid of patch Right sid of gamnt fabic x x Slct pattn B11. S th ltd buttonhol on both fabics togth. Cut th buttonhol opning as illustatd thn pull th patch out though th slit to th oth sid. Wong sid of patch Right sid of gamnt fabic Right sid of patch c c Pull out th patch until th ight sid of th patch is shoing. Us an ion to pss both con nds until thy a suad off. Right sid of patch Wong sid of gamnt fabic v v Fold back ach sid of th patch to fom buttonhol lips. Wong sid of patch Right sid of patch b b Pss both folds ith an ion. Right sid of patch Wong sid of gamnt fabic n n Bast both dgs of th sam ith a ndl and thad by hand. Right sid of gamnt fabic 51

54 m t m Fold ov th lngth of th gamnt fabic, s back and foth bsid th oiginal sam to scu flaps of th patch. Wong sid of gamnt fabic t S back and foth,, Fold ov th nd of fabic and s back and foth th tims ov th tiangula nd. Wong sid of patch Right sid of gamnt fabic Wong sid of gamnt fabic.. Th patch should b cut 1 to 1.5 cm (7/16 5/8 ) aay fom th hol. Th cons should b cut oundd off as shon. Right sid of patch Wong sid of gamnt fabic y 0 u 0 Plac th facing on th ong sid of th gamnt fabic. Mak th 4 cons ith pins as shon. y Facing u Gamnt fabic u 1 y u 1 Tun all th lays ov and cut th buttonhol opning on th facing in th sam ay as stp x. Fou mak pins sho you th con points on th facing. Fold back ach flap btn th facing and patch. y Facing u Gamnt fabic 2 y 2 Stitch aound th opning ith a ndl and thad as shon. y Facing u Gamnt fabic 3 3 Th ltd buttonhol is complt. u Gamnt fabic u 52

55 z Codd Buttonhol To s a codd buttonhol, follo th sam pocdu as fo B1 sua (snso) buttonhol. Slct pattn B1. z Plac th button on th button hold on th buttonhol foot. Hook a fill cod on th spu on th font of th foot. Bing th nds of cod toad th back and und th foot. Bing up th nds of th cod and inst both nds btn th ibs and mtal plat. Spu Mtal plat St th stabiliz plat as ncssay and attach th buttonhol foot. x x Lo th ndl into th fabic h th buttonhol ill stat. Lo th foot and buttonhol lv. Pull th ndl thad lightly to th lft. Stat th machin to s th buttonhol ov th cod. Th machin stops automatically hn finishd. Rmov th fabic fom th machin and cut th sing thads only. c c Cut th fill cod at both nds as clos to th buttonhol as possibl. Do not adjust th opning idth id than 0.8. St th stitch idth in accodanc ith th thicknss of th cod usd. To cut th buttonhol opning, f to th instuctions on pag

56 z Spciality Stitchs S pags 87, 88 and 55 fo fing sing instuctions of B12, B14, B15 and B16. B13 Daning z Attach th automatic buttonhol foot R and pull th button hold all th ay out. Plac th fabic und th foot, and lo th ndl at th stating point. Thn lo th foot. Button hold Stating point x Stat th machin and s to th uid lngth, thn pss th vs button. This sts th daning lngth. Continu sing until th machin stops automatically. Rvs button Ruid lngth x c c S anoth lay of daning ov th fist lay, at a ight angl to it. Th maximum daning lngth is 2 cm (3/4 ) and th maximum idth is 0.9 cm (3/8 ). 0.9 cm To s th sam siz daning Whn finishd sing, a confimation mssag ill appa. Simply stat th machin to s anoth lay of daning stitchs in th sam siz. To s th nxt lay of daning stitchs in a diffnt siz, pss th X ky. To s a shot daning S th fist lin to th dsid lngth and stop th machin. Pss th vs button and stat th machin again. Th machin ill s th st of th daning and stop automatically. To adjust th vnnss of daning stitchs You can coct unvnnss of daning stitchs by pssing th o + ky of th adjusting indo. If th lft con is lo than th ight sid, pss th ky to coct it. If th ight con is lo than th lft sid, pss th + ky to coct it. 54

57 B15, B16 Eylt Th ylt is usd fo blt hols, tc. Attach th satin stitch foot F. To s: Plac th gamnt und th foot and lo th ndl to th stating point. S until th machin stops automatically. Stating point Opn th ylt ith an al, punch o pointd scissos. To coct th shap of an ylt: If th ylt is opn, pss th ky. If th ylt ovlaps, pss th + ky. Th shap can b adjustd ithin S1 to S3 (dfault stting is S2). 55

58 Dcoativ Stitchs Dcoativ Stitch Goups Th pattns in this sction a classifid into 10 goups. Ths pattns a pogammabl and you can mak a pattn combination. Appliu stitchs (A): 2 pags Stitchs in this goup a fo appliu. (Rf to pag 89.) Hiloom stitchs (H): 4 pags This goup povids hiloom stitchs and coss stitchs fo caft sing and hom déco. 56

59 Quilting stitchs (Q): 6 pags Stitchs in this goup a fo patchok and uilting. (Rf to pags 61, ) Satin stitchs (S): 2 pags Th stitchs in this goup can b longatd up to 5 tims thi oiginal lngth hil th stitch dnsity mains th sam. (Rf to pag 62.) 57

60 Bidg stitchs (BR): 1 pag Bidg stitchs a usd fo insting staight stitchs aft a stitch pattn. Th numb bsid th stitch imag on th staight stitch ky indicats th stitch count of a pogammabl unit. Pattns BR5 and BR7 ill inhit th ndl dop position and stitch lngth of th pvious pattn in th pogammd pattn combination. (Rf to pag 66.) Dcoativ stitchs (D): 8 pags 75 attactiv pattns a availabl in this goup. 58

61 Long stitchs (L): 2 pags Pattns in this goup a idal fo dcoating gamnts and fo adding bod tims. Pictogaph stitchs (P): 3 pags Play stitchs (PL): 1 pag Th a many cut dsigns, fancy motifs and calligaphy availabl in ths goups. 59

62 60 Catd stitchs (CS) In this sction, you can slct oiginal stitch pattns catd ith Stitch Compos. Rf to pag 64 fo ho to tansf catd stitch pattns fom th PC to th machin.

63 Quilting(Q) Using th Quilting Guid Ba Th uilting guid ba is hlpful hn sing paalll, vnly spacd os of stitchs. Inst th uilting guid ba into th hol in th back of th foot hold. Slid th uilting guid ba and st it to th dsid spacing. Quilting guid ba Hol S os of stitchs hil tacing th pvious o of stitchs ith th uilting guid ba. Q1-Q3 Patchok Picing Pattns Q1 to Q3 a spcial stitchs fo saming patchok pics. Pattns Q2 and Q3 a fo patchok picing ith 1/4 and 7 mm sam alloancs spctivly. Us th 1/4 sam foot O. Plac th patchok pics ight sids togth. S hil guiding th dg of fabic along th guid. Guid Right sid of th fabic Angl Scals on th Ndl Plat You can asily sam patchok pics at th dsid angl ithout making, by using th angl scals on th ndl plat. Th angl scals a makd at 45, 60, 90 and 120 dgs. Us th bokn lins hn picing th patchok pics ith th 1/4 sam foot O as illustatd. Bokn lin Us th solid lins hn picing th patchok pics ith th zigzag foot A. Align th dg of th fabic to th 1/4 sam guid lin. Solid lin 1/4 sam guid lin Q54-Q55 Hand-look uilt stitchs Pattns Q54 to Q55 a spcial stitchs fo uilting hich look lik hand sn stitchs. Us a tanspant nylon thad fo th ndl and odinay sing thad fo th bobbin. Th bobbin thad is pulld up on th ight sid of th fabic and th stitchs look as if thy sn by hand. 61

64 S1-S20 Dcoativ Satin Stitchs Elongation Ratio Pattns S1 to S20 a dcoativ satin stitchs fo hich th pattn lngth can b longatd ithout changing th stitch dnsity. Pss th stting ba to xpand th manual stting indo. Stting ba Pss th + ky to longat th stitch pattn. + ky (longation) To duc th longation atio, pss th ky. ky (longation) Th pattn can b longatd up to 5 tims th oiginal lngth. Th longation atio is indicatd in th box. Elongation atio You can also alt stitch dnsity and stitch idth. Th longation function and th taping function (f to pag 63) cannot b applid at th sam tim. Th longation function ill b movd hn a taping function is applid to th longatd stitch. X1 X2 X3 X4 X5 62

65 Appliu Quilt Dcoativ Hiloom Satin Long t Taping You can tap th bginning and nd of th dcoativ stitch pattns to cat tapd cons and points. Th taping can b applid to th stitch pattns as shon. Taping function cannot b applid hn using a stitch pattn combination, tin ndl, dual fd foot, o staight stitch ndl plat. Th taping lngth vais dpnding on th stitch pattn and its taping shap. Mak a tst stitch on an xta pic of th fabic to chck th taping lngth. If you pss th vs button hil sing o th machin is stoppd, it ill immdiatly s locking stitchs and automatically stop. Th taping siz ill not b mmoizd. If you stop th machin hil sing, and chang th stitch idth, cnt ndl position o stitch lngth, th machin ill stat tapd sing fom th bginning. Exampl: To tap th stitch pattn H5. Slct stitch pattn H5. Pss th taping ky. Th dialog box ill opn. Taping ky Slct th shap of th taping fo th bginning and th nd of th stitch pattns by pssing th taping shap kys. Th kys on th top half a fo taping th bginning of th stitch pattn. Th kys on th bottom half a fo taping th nd of th stitch pattn t. y i Th numbs in th taping shap kys indicat th dg of taping. You can apply th taping alignmnt fom lft, cnt o ight. Th bginning and nd of th stitch pattns can b alignd spaatly. In this xampl, slct th ight-alignd 30 tap ky y fo th bginning of th stitch pattn i. Slct th cnt-alignd 90 tap ky u fo th nd of th stitch pattn o. Pss OK ky to apply th taping. u o 63 Stat th machin and s to th uid lngth, thn pss th auto-lock button. Th machin ill s th slctd tap nd, and s th auto-lock stitch and stop. To s th sam siz taping Whn finishd sing, a confimation mssag ill appa. Pss OK ky and stat th machin to s anoth lay of taping in th sam siz. To s th nxt lay of taping stitch in a diffnt siz, pss th X ky and s. Stat th machin and s to th uid lngth, thn pss th auto-lock button. To mov th taping function, pss th sam stitch pattn ky.

66 Catd Stitchs (CS) Oiginal stitch pattns catd ith Stitch Compos a savd in this goup. Inst th USB flash div containing th oiginal stitch pattns and pss th impot ky, o impot thm fom Stitch Compos using a USB cabl. Impot ky Slct th USB icon and th fold list ill appa. Slct th dsid fold to opn and th fil list ill appa. Slct th dsid fil and th oiginal stitch pattn is savd and th pattn slction ky is catd. You can slct, pogam and s ths pattns th sam ay as ith th built-in stitch pattns. To dlt th pattn, pss th dlt ky and slct th pattn to dlt. A confimation mssag ill appa. Pss th OK ky to dlt th pattn. Dlt ky Up to 40 pattns can b savd in this goup. Tin ndl sing is not availabl fo th catd stitchs. 64

67 Tin Ndl Sing Som of th utility stitchs and dcoativ stitchs can b sn ith a tin ndl. v A B x Rplac th ndl ith th tin ndl supplid ith th standad accssois. z CAUTION: Tun th po sitch off o pss th lockout ky bfo changing th ndl. Do not us tin ndls oth than th on includd in th standad accssois, othis th ndl may hit th ndl plat, foot o hook and bak. Lockout ky c b Inst th xta spool pin into th hol und th top cov. Plac a spool of thad on th additional spool pin and th spool hold (f to pag 13). Exta spool pin Da both thads fom th spools and pass thm though th thading points fom z to v. Slip th thad A though th ndl ba thad guid b, thn pass though points n and m as illustatd. Thad th thad B though th font hol of ndl ba thad guid b, thn pass it though th ndl hol,. Mak su that th to stands of thad fom th spools do not gt tangld. n m, Thading fom points z to v is th sam as fo a singl ndl (f to pag 16). Th ndl thad cannot b usd ith th tin ndl. Pss th tin ndl ky and slct th dsid pattn. Pattns not suitabl fo tin ndl sing cannot b slctd (pattn slction kys a gayd out). Buttonhols, spcialty stitchs and monogam cannot b slctd. Tin ndl ky Whn you s pattns ith th tin ndl, tst th stitchs fist bfo you s on th gamnt. Us th zigzag foot A o satin stitch foot F fo tin ndl sing. Us th thads #60 o fin. Whn changing th sing diction, ais th ndl and pss foot thn tun th fabic (foot up fo pivoting option is not availabl hn th tin ndl is slctd). Us th thad cutt on th fac plat hn cutting thads. Aft tin ndl sing is finishd, pss th tin ndl ky and th aning mssag ill appa. Pss th OK ky and plac th tin ndl ith a singl ndl. 65

68 Pogamming a Pattn Combination Th pattns in th dcoativ stitch catgoy and monogams can b pogammd to mak a pattn combination. Pss th pogam ky and slct as many pattns as you ish to pogam. You can pogam up to 100 pattns in ach combination. Th imags of pogammd pattns a shon on th lft sid of th visual touch scn. Pogam ky t Mio Imag of Pattns To s o pogam th pattn as a mio imag, pss th vtical mio ky o hoizontal mio ky. Slct th dsid pattns to cat th mio imag. Pss th vtical o hoizontal mio ky again to cancl th mio imag function. Vtical mio ky Hoizontal mio ky To vi th nti pattn combination, pss th cuso ky to scoll ov th pattn combination o pss th dit box to sho th nti pattn combination at a glanc. Cuso kys t Edit box Hoizontal mio imag is availabl only fo th spcific pattns. Fo pattn idntification, ths pattns a shadd in light gy on th fnc chat insid th top cov. Mio imag function ill b cancld and mio imag icon ill disappa if th slctd pattn is not suitabl fo th mio imag. Pss foot pssu cannot b adjustd to th stitch pattns of a pattn combination individually. If you attmpt to do so, only th last pattn s pss foot pssu sttings a applid to all th pogammd pattns. Bidg Stitchs Bidg stitchs a usd fo insting staight stitchs aft a stitch pattn. If you ant mo spac btn Fnch knots (D5), fo xampl, inst pattn BR5 aft pattn D5. To counts of staight stitchs a addd to pattn D5. Pattns BR5 and BR7 ill inhit th stitch lngth and ndl dop position of th pvious pattn in th pattn combination. 66

69 Editing a Pattn Combination Dlting a Pattn Th pattn bfo th cuso o shon in blu is dltd by pssing th dlt ky. Cuso Dlt ky To dlt a pattn in th middl of a combination, pss th cuso ky to slct th pattn you ish to dlt. Th stitch imag of th slctd pattn tuns blu. Pss th dlt ky to dlt th slctd pattn. Cuso ky Slctd pattn Insting a Pattn Pss th cuso ky to slct th pattn nxt to h you ish to inst a pattn. Ent th dsid pattn to inst it bfo th slctd pattn. t Instd pattn t 67

70 Statov Ky This is a 2-ay function ky to stat sing a pattn combination ov fom th bginning. Whn you stop sing a pattn combination, th statov ky is activatd. Cunt pattn statov If you ish to stat sing fom th bginning of th cunt pattn, pss th statov ky onc and stat th machin. Th ky ill chang and sho a tiangl and doubl ba that mans th machin ill stat ov fom th cunt pattn of th combination. Statov ky (cunt pattn of th combination) Cunt pattn Whn you stop sing a pattn combination duing th fist pattn and pss th statov ky, th numb of th ba abov th tiangl ill not chang bcaus th pattn ill b sn fom th fist pattn. Fist pattn statov Th ky shos a tiangl and singl ba that mans th machin ill stat ov fom th fist pattn. If you ish to stat sing fom th bginning of th fist pattn of th combination, pss th statov ky tic and stat th machin. Statov ky (fist pattn of th combination) Fist pattn If auto thad cutting is don, th machin ill statov fom th fist pattn. 68

71 Chcking Pattn Combination Lngth You can chck th total lngth of th pattn combination by pssing on th pattn combination lngth ky indicatd in th manual stting indo. Pss th stting ba to opn th manual stting indo. Stting ba Pattn combination lngth ky Th adout of th total lngth is a thotical valu and th actual lngth may vay dpnding on sing conditions. Fo xampl, slct th pattn P4 th tims, and s a pattn combination. If th actual lngth diffs considably fom th adout, masu th actual lngth and nt th nast valu by pssing th + o ky. In this cas, th thotical valu is 51 mm. Hov, if th actual lngth is 40 mm, nt 40 mm by pssing ky. Pss th OK to gist it. Actual lngth Th adout is adjustd automatically hn calculating th lngth of oth pattn combinations. Th mssag Plas nt th actual lngth of th pattn combination you sd. disappas to indicat that th displayd valu is adjustd alady. Fo xampl slct pattns P10, P18 and P4. Th thotical valu is 53 mm. Hov, th ad out is calculatd accoding to th masud actual lngth. In this cas, th adjustd valu is 42 mm. Pss th dfault ky to cla th ntd actual lngth. Dfault ky 69

72 t y Monogamming You can pogam ltts and symbol dsigns fo monogamming. Pss th Monogam ky and th font slction indo ill opn. You can slct on of 8 fonts. Slct th dsid font by pssing th cosponding ky. Monogam ky Block font ky Scipt font ky Boaday font ky t Block font (9 mm) ky y Cyillic font ky u Mincho (9 mm) font ky i Maumoji (9 mm) font ky o Symbol font ky Th monogam mod indo ill opn. Th hights of Block font (9 mm), Mincho font (9 mm) and Maumoji font (9 mm) a appoximatly 9 mm. u i o!0!1!2!3!4!5 Function Kys!0 Cuso ky Pss th cuso ky to mov th cuso up o don.!1 Edit box Pss th dit box to vi th nti monogam.!2 Ltt siz ky Pss this ky to slct th full siz (L) o small siz (S).!3 Ltt cas ky Pss this ky to slct th upp cas o lo cas.!4 Dlt ky Pss this ky to dlt th slctd chaact o symbol.!5 Fil sav ky Pss this ky to sav th monogam as a data fil. Numbs, symbols and Euopan ltts a availabl on pags 2/5 though 5/5.!0 70

73 Manual Thad Tnsion This machin is uippd ith automatic thad tnsion contol. Hov, you may nd to manually adjust th tnsion balanc dpnding on th sing conditions. To adjust th thad tnsion, pss th stting ba to sho th option. Individual Thad Tnsion Adjustmnt To apply th thad tnsion adjustmnt to ach ltt individually, slct th ltt by moving th cuso. Pss + o to adjust th thad tnsion of th slctd ltt. Th adjustd thad tnsion is applid to th slctd ltt. Thad tnsion adjustmnt Unifid Thad Tnsion Adjustmnt To apply th thad tnsion adjustmnt to all ltts togth, you do not nd to slct th ltts. Pss th unifid thad tnsion ky. Pss + o to adjust th thad tnsion. Th adjustd thad tnsion is applid to all ntd ltts. Whn unifid thad tnsion contol is applid, th unifid thad tnsion ky tuns to yllo. Pss th unifid thad tnsion ky again to dactivat th unifid thad tnsion adjustmnt. Spacing To nt a spac in monogamming, pss on of th th spac kys on th lo ight con of th monogam slction. Spac kys Small-siz spac Mdium-siz spac Lag-siz spac Rducing th Siz of Ltts To duc th hight of a chaact to appoximatly 2/3 of its oiginal siz, slct th chaact and pss th ltt cas ky. A A 2/3 71

74 Pogamming a Monogam Simply nt th chaacts by pssing th cosponding kys to pogam a monogam. Exampl 1: Quilt in Block font Slct Block font. Ent Q. Pss th ltt cas ky to slct lo cas. Ltt cas ky Ent u, i, l and t. Exampl 2: Café in Scipt font Pss th monogam ky and slct Scipt font. Ent C. Monogam ky Pss th ltt cas ky and slct lo cas ltts. Ent a and f. Pss th pag ky 3 tims to go to th pag 4 of 5. Pss th ltt cas ky. Ent é. Us a blu tip ndl fo sing a monogam. Apply a sht of stabiliz to fin fabics o sttch fabics. Tst s to chck th sing sults. 72

75 Saving a Pattn Combination Alays back up you data to an xtnal dvic in cas a poblm occus. Th pattn combination and monogam can b savd as a fil in th machin s intnal mmoy o a USB flash div. Th machin has a USB pot fo USB flash div. Pss th sav fil ky aft pogamming a pattn combination, and th sav fil indo ill opn. Sav fil ky Th Odf fold is shon. Slct th location to h you ish to sav th pattn combination. Th fil nam is assignd automatically stating fom M_001...in od. Pss th OK ky to sav th fil und th assignd nam. Fil nam If you ish to assign a uniu nam to th fil, pss th nam ky and th kyboad indo ill opn. Rnam ky Ent a n nam and pss th OK ky to chang th fil nam. Pss th OK ky and th fil is savd und th n nam. Th fils and folds a displayd on diffnt pags. Us pag kys to display th savd fils. Th Odf fold is fo th dfault location to sav a pattn combination. You may sav th pattn combination into th Odf fold. y t Cating a n fold Slct a location fo a n fold and pss th n fold ky. Th kyboad indo ill opn. Ent a fold nam and pss th OK ky. Th n fold is catd und th assignd nam. t N fold ky u Dlting a fil o fold Pss th dlt ky and slct th fil o fold to dlt. A confimation mssag appas. Pss th OK ky to dlt th fil o fold. y Dlt ky 73 Changing th fold nam o fil nam Pss th nam ky and slct th fold o fil of hich you ish to chang its nam. Th kyboad indo ill opn. Ent th n nam and pss th OK ky. Th nam of th fold o fil ill chang. u Rnam ky Th maximum numb of chaacts that can b ntd fo naming is 10.

76 Opning a Pattn Combination You can opn th pattn combination and monogam savd in th machin s intnal mmoy o a USB flash div. Pss th opn fil ky and th opn fil indo ill opn. Opn fil ky Slct th mmoy location; ith th machin s intnal mmoy o a USB flash div. Th Odf fold ill appa. If you catd any folds bfo, thos folds ill also appa. If you cannot find th dsid fold o th fil in th pag, pss th nxt o pvious pag ky to display th oth pags. Slct th dsid fold and th fil list ill appa. Slct th dsid fil. Th scn ill tun to th odinay sing indo shoing th savd pattn combination o monogam. Pss on of th layout kys to slct th layout of th fil list as shon. 74

77 Sing Application Sing Applications Sing application is a uniu fatu that povids you ith 12 usful sing applications. Pss th sing application ky and th sing application mnu ill opn. Th 12 sing applications a as follos: Saming Ovdg Blind Hm & Shll Tuck Rolld Hm t Zipp Sing y Gathing t y u i u Basting i Button Sing o Tacking!0 Appliu!1 Patchok!2 Quilting o!0!1!2 75

78 Saming Th a 4 typs of stitchs fo saming in this goup. Wovn (Saming 1) Staight stitchs fo saming gula ovn fabics. Sttch/Knit (Saming 2) Nao sttch stitchs fo saming sttch o knit fabics. Cuv (Saming 3) Shot staight stitchs fo saming cuvd lin. Topstitching (Saming 4) Long staight stitch fo topstitching ith thick thads. 76

79 Ovdg Wovn Ovcasting stitch fo gula ovn fabics. Sttch/Knit Knit stitch fo finishing a dgs of sttch o knit fabics. Fo btt sults, us th zigzag foot A and s laving an aduat sam alloanc. Aft sing, tim th sam alloanc clos to th stitchs (f to pag 35). Wovn Ovlock stitch simila to a pofssional ovlock stitch. Havy Doubl ovdg stitch fo pvnting a dgs of linns and gabadins fom avlling. 77

80 Blind Hm Slct Blind Hm. Th folloing 2 options a availabl. Wovn Fo blind hmming gula ovn fabic Sttch/Knit Fo blind hmming sttch o knit fabic. To s: Attach th blind hm foot G. (A) (B) Fold th fabic to fom a hm laving a 0.5 cm (1/4 ) alloanc as shon. 0.5 cm (1/4 ) (A) Mdium to havy fabics: Th a dg should b ovcastd. (B) Fin fabics: Fold th a dg 1 cm (1/2 ). 1 cm (1/2 ) y t Position th fabic so that th fold coms to th lft sid of th guid on th foot. Lo th pss foot. Th ndl should just pic th foldd dg hn it coms ov to th lft sid. Adjust th position of th ndl dop if ncssay. S guiding th fold along th guid. t Fold y Guid Aft sing is finishd, opn th fabic flat. Th sam on th ight sid of th fabic is almost invisibl. i u Adjusting th ndl dop position Pss th stting ba to xpand th manual stting indo. Pss th + ky u in th upp o to mov th ndl dop positions to th lft. Pss th ky i in th upp o to mov th ndl dop positions to th ight. Th ndl dop position ill chang, hil th stitch idth (2.8 mm) mains consistnt. Th distanc btn th lft ndl dop position and guid of th foot is indicatd in millimts. You can alt th stitch idth by changing th ight ndl dop position. 2.8 mm 78

81 Alting blind hm stitch idth Pss th + ky in th o to incas th stitch idth. Pss th ky in th o to dcas th stitch idth. You can mov th lft ndl dop position ith th + o ky in th o. Shll Tuck Slct Shll Tuck. Th folloing 3 options a availabl. Small Nao shll tuck stitch Mdium Mdium idth shll tuck stitch Lag Rgula shll tuck stitch To s: Us a light ight fabic (Ticot, fo xampl). Fold th fabic in bias as shon and stitch on th fold. Allo th ndl to baly cla th foldd dg to cat a shlld dg. If you s shll tucks, spac th os at last 1.5 cm (5/8 ) apat. t Alting shll tuck position Pss th + ky in th o to mov th shll tuck position to th ight. Pss th ky in th o to mov th shll tuck position to th lft. You can mov th ight ndl dop position ith th + o ky in th o t. 79

82 Rolld Hm Staight Stitch Rolld hmming ith staight stitch Zigzag Stitch Rolld hmming ith nao zigzag stitch 4 mm & 6 mm Rolld hmming using optional olld hmming ft D1 and D2 z 0.3 cm (1/8 ) 5 cm (2 ) To s: z Attach th olld hm foot D. Fold th fabic dg tic to fom a hm, 0.3 cm (1/8 ) id and 5 cm (2 ) long thn pss. x x Plac th fabic aligning th hm dg ith th guid of th foot. Tun th handhl to lo th ndl to th stating point. Lo th foot and s sval stitchs sloly hil pulling on th thads to assist fding th fabic. Stop th machin and lo th ndl into th fabic. Rais th foot and inst th foldd potion of th fabic into th cul of th foot. c c Lo th foot and s hil lifting th dg of th fabic to kp it fding into th cul smoothly and vnly. 0.6 cm (1/4 ) Tim th cons 0.6 cm (1/4 ) to duc bulk. 0.6 cm (1/4 ) 80

83 Zipp Sing Lappd zipp Lappd zipp application ith th zipp foot E Concald zipp Concald zipp application ith th optional concald zipp foot Z Lappd zipp sing Pss th lappd zipp icon and th zipp sing indo ill opn. Pss th sing stp icon and th machin stting ill automatically adjust to suit ach sing stp. Fabic ppaation Add 1 cm (3/8 ) to th zipp siz. This is th ovall opning siz. Mak th nd of opning. Zipp siz Opning siz 1 cm (3/8 ) End of opning Attach th zigzag foot A. Lock-a Matic Basting Lock-a-Matic Plac th ight sids of th fabic togth and s to th nd of th opning laving a 2 cm (3/4 ) alloanc. t 2 cm (3/4 ) Basting Bast th zipp opning. t 81

84 S lft sid Attach th zipp foot E. Fold back th lft sam alloanc. Tun th ight sam alloanc und to fom a 0.2 to 0.3 cm (1/8 ) fold. Plac th zipp tth nxt to th fold and pin in plac cm (1/8 ) Zipp tth Fold Opning siz Lo th foot onto th topsid at th bottom of th zipp so that th ndl pics th fabic nxt to th fold and th zipp tap. S along th zipp guiding th zipp tth along th bottom dg of th foot. S though all lays nxt to th fold. Stop 5 cm (2 ) bfo zipp foot E achs th slid on th zipp tap. 5 cm (2 ) Rais th foot and opn th zipp. Lo th foot and stitch th maind of th sam. Clos th zipp and spad th fabic opn flat ith th ight sid of th fabic facing up. 82

85 Basting Rplac th foot ith th zigzag foot A. Bast th opnd fabic and zipp tap togth. Basting 1 cm (3/8 ) S ight sid Rplac th foot ith th zipp foot E. Backstitch acoss th nd of opning to 1 cm (3/8 ). Stitch though th gamnt and zipp tap, guiding th zipp tth along th bottom dg on th foot. Stop about 5 cm (2 ) fom th top of th zipp. Lo th ndl into th fabic, ais th foot and mov th basting stitchs. Basting stitchs Opn th zipp and mov th slid to th a of th foot. Lo th foot and stitch th maind of th sam making su th fold is vn. Rmov th basting stitchs. 83

86 Concald Zipp Sing (optional) Pss th concald zipp icon and th indo ill sho th stp-by-stp icon kys. Ppa a concald zipp 2 cm (3/4 ) long than th opning siz. Pss th sing stp icon and machin sttings ill automatically adjust to suit ach sing stp. t Basting Lock-a-Matic Lock-a-Matic Attach th zigzag foot A. Plac th ight sids of th fabic togth and s to th nd of th opning ith a 2 cm (3/4 ) sam alloanc. Pss th vs button to lock th sams. End of opning 2 cm (3/4 ) Zipp siz Opning siz i u y Basting Bast th opning 0.3 cm (1/8 ) insid of th sam lin. t 0.3 cm (1/8 ) Fold up th lft sam alloanc to th bodic. Opn th zipp and put it on th ight sam alloanc ith th back sid up. Plac th ight zipp tth nxt to th fold and pin it in plac. y Zipp tth u Fold i Lft sam alloanc o!0 Right of tth Attach th concald zipp foot Z. Rais th zipp tth on th ight and lo th foot so th lft goov of th foot catchs th zipp tth. Stitch though th zipp tap and fabic up to th nd of th opning. Rvs th stitchs to scu th sam. o Lft goov!0 Zipp tap 84

87 Stitching tap Rais th foot and clos th zipp. Rplac th foot ith th zipp foot E. Tun and fold th bodic to th ight. Sam along th dg of th lft zipp tap and vs th stitchs 2 cm (3/4 ) bfo th zipp bottom. 2 cm (3/4 ) 2 cm (3/4 ) Stitching tap Tun and fold th bodic to th lft. Sam along th dg of th ight zipp tap and vs th stitchs 2 cm (3/4 ) bfo th zipp bottom. Lft of tth Rais th foot and plac it ith th concald zipp foot Z. Rmov th basting stitchs. Opn zipp and inst th pull tab btn fabic and zipp tap to allo th slid to ach th stopp. Pull tab 0.3 cm (1/8 ) Rais th zipp tth on th lft and lo th foot so th ight goov of th foot catchs th zipp tth. Stitch though th zipp tap and fabic up to th nd of th opning. Rvs th stitchs to scu th sam. Zipp tth Goov Slid up th stopp to 0.3 cm (1/8 ) blo th nd of th opning and fastn th stopp ith plis. Stopp 85

88 Gathing In addition to th gula gathing stitch, this sction offs you a spcial stitch fo asing slv tops. Easing a slv top Pull both of th thads about 10 cm (4 ). S a pai of lins, 3 mm (1/8 ) apat, along th dg of th slv top. Pull th bobbin thads to contact th slv top cafully, matching it ith th amhol siz. Mak su not to mak gaths in th slv top. Basting Th a 2 basting stitchs availabl in this sction. Basting (Auto) This stitch is usd fo basting zipp tap o fitting of gamnts. S in th sam ay as that fo staight stitch sing. Basting (Manual/Quilting) Attach th daning foot PD-H. Lo th fd dog. Rf to pag 23 fo ho to attach th daning foot PD-H. To s Hold th fabic taut and dpss th foot contol. Th machin ill mak on stitch and stop automatically. Slid th fabic to th a fo th nxt stitch. 86

89 Button Sing Whn attaching a button to thick fabic, you nd to mak a shank by using th button shank plat. Lo th fd dog. Slct Shank. Attaching th button sing foot T Mak su to pss th lockout ky to lock th machin. Rais th pss foot ith th pss foot lift. Inst th a pin of th foot into th a goov of th foot hold. Ra pin Ra goov Gntly lo th pss foot lift hil holding th foot ith you fing to fit th foot. Pss th lockout ky to unlock th machin. Plac a button on th fabic and lo th ndl into th lft hol of th button by tuning th handhl ith you hand. Inst th button shank plat und th button. Lo th foot to hold th button in plac, aligning th diction of th button. Button shank plat Rais th ndl by tuning th handhl until th ndl ba sings to th ight. Pss th + o ky so th ndl nts into th ight hol of th button. Th maximum stitch idth is 7 mm (1/4 ). Stat sing and continu until th machin stops automatically. Rmov th fabic fom th machin. t Cut th all thads laving at last 10 cm (4 ) tails. Tim th thad at th bginning clos to th fabic. Pass th ndl thad at th nd of stitching though th lft hol in th button, btn th button and fabic. Pull th ndl thad to bing th bobbin thad up to th ight sid of th fabic. Ndl thad at th nd t Bobbin thad Wind th thads to fom a shank and knot thm togth. Th button shank plat cannot b usd if th button is too thick. 87

90 Tacking Tacking is usd to infoc pockts, cotchs and blt cais h xta stngth is ndd. Th a 3 auto tacking sizs and manual tacking availabl. Attach th satin stitch foot F. Auto tacking Lo th ndl at th stating point and stat sing. Th machin ill s th tack of th slctd siz and stop automatically hn it is finishd. Stating point Manual tacking Stat th machin and s to th uid lngth, thn pss th vs button. This sts th tack lngth. Continu sing until th machin stops automatically. Ruid lngth Th maximum lngth of tacking is 1.5 cm (5/8 ). To s th sam siz tack To s anoth tack in th sam siz, simply stat th machin and s until th machin stops automatically. To s th nxt tack in a diffnt siz, pss th X ky. 88

91 Appliu Th a 6 typs of appliu stitchs availabl in this sction. You can slct th ndl stop position ith up o don by pssing th ndl stop position ky. Ndl stop position ky Th ltt abov th stitch imag dnots th baslin of th ndl dop position. M: Middl (cnt) R: Right Th baslin can b adjustd ithout changing th stitch idth by pssing th + o ky on th o. M R t Pivoting at appliu cons Whn sing an appliu ith shap cons, you may tun on th Foot up fo pivoting option so that th pss foot automatically gos up hn th machin stops. Pss th foot-up ky to tun on this option Foot-up ky Mak su to stop th machin ith th ndl doppd at th out dg of th appliu. Stating ov fom th con Pss th statov ky bfo sing in th n diction to s fom th bginning of th pattn. Statov ky To options of statov a availabl fo appliu stitchs. Pss th coning ky to slct nomal statov o coning statov. Th ky icon ill chang to sho hich option is bing slctd hn pssing th ky. t Coning ky Nomal statov: S a locking stitch thn stat sing fom th bginning of th pattn. Coning statov: Stat sing fom th bginning of th pattn ithout a locking stitch. 89

92 Patchok Patchok picing Th a 3 stitchs fo saming patchok pics in this sction. Th dfault stitch lngth is st at 1.8 mm, idal fo patchok picing, but you can fin tun th stitch lngth by pssing th + o ky. Attach 1/4 sam foot O, hich hlps you to kp a constant 1/4 (6 mm) sam alloanc. Put 2 pics of fabic ith ight sids togth. Plac th patchok pics und th foot so that th dg of th fabic matchs th guid on th pss foot. Edgs of fabic Guid on th 1/4 sam foot O Whn you stop th machin, a mssag ill appa. Pss th OK ky and th machin mmoizs th sam lngth to s anoth pic of th sam lngth. Pss th X ky to s in a diffnt siz. Aft sing th mmoizd lngth, a mssag ill appa. To s th sam lngth, stat th machin and it ill stop automatically aft sing th mmoizd lngth. 90

93 Quilting In this sction, 6 typs of usful stitchs fo uilting a availabl. Staight stitchs (ith dual fd) Clasp stitchs F motion uilting stitchs Sculptu stitchs (ith dual fd) t Hand-look uilt stitchs y Vaiabl zigzag stitchs t y Staight Stitchs (ith dual fd) Staight stitchs in this sction a suitabl fo saming uilt lays using th dual fd foot (f to pag 22 fo ho to attach it). Plas f to pag 61 if you ish to us zigzag foot A. Quilting guid ba fo dual fd foot Th uilting guid ba is hlpful hn sing paalll, vnly spacd os of stitching. Inst th uilting guid ba into th hol in th a of th foot hold. Shift th uilting guid ba to th dsid spacing. Quilting guid ba Hol S os of stitching hil tacing th pvious o of stitchs ith th uilting guid ba. Clasp Stitchs You can clos uilt lays and batting using th clasp stitch. Us th satin stitch foot F. Th machin ss on unit of th pattn and automatically stops ith th ndl in up position hn compltd. 91

94 F Quilting Fo odinay and bulky uilts, slct Staight Stitch 1 o Zigzag Stitch 1, and us th daning foot PD-H (f to pag 23 fo ho to attach th daning foot). Slct th Staight Stitch 2 o Zigzag Stitch 2 fo flatt uilts and us th f uilting foot QC, QO o QV. On Stitch Off Th machin stops automatically aft sing on stitch so that you can bing th bobbin thad up to pvnt it fom bunching up on th ong sid of th fabic. Hold th ndl thad and s on stitch and th machin stops automatically. Pull th ndl thad up to bing th bobbin thad up. Hold both th ndl and bobbin thads and s sval stitchs to scu th thads. You can tim th thad tails ith scissos. Th machin ill stitch continuously hn you sum sing. If you ish to stat sing ithout on stitch off, pss th on stitch off ky to cancl this function. Th ky icon changs to. Whn on stitch off is activ, th ky icon shos. On stitch off ky To s S at mdium spd hil guiding th fabic ith you hands. Mov th uilt 3 mm o lss p stitch. Rf to pag 87 (button sing foot) fo ho to attach th f uilt ft. Foot Hight fo F Motion Quilting Whn Staight stitch 2 o Zigzag stitch 2 is slctd, th hight of don position of th f motion uilting ft (QC, QO, QV) is optimizd automatically. Hov, you can fin tun th foot hight accoding to th uilt thicknss. Plac th fabic und th foot and lo th foot. Pss th foot hight ky and th adjusting indo opns. Adjust th foot hight by pssing th + ky o ky and pss th OK ky to gist th stting. Foot hight ky Rduc th hight if th fabics bounc hn sing. Incas th hight if th foot gts tappd in th fabics hn sing. Pupl tip ndl is commndd fo f motion uilting to pvnt skippd stitch. Do not mov th uilt lays toad you hn th opn-to foot is attachd. Sculptu Stitchs Ths stitchs a usd to accntuat dsign outlins and to cat a mock hand-uilt. 92

95 Hand-look Quilt Stitchs Us a tanspant nylon thad fo th ndl and odinay sing thad fo th bobbin. Th bobbin thad is pulld up on th ight sid of th fabic and th stitchs ill look as if sn by hand. Vaiabl Zigzag This uniu fatu allos you to contol zigzag idth ith th kn lift. -M -L -M -L Slct -M o -L, using th daning foot PD-H fo sing uilt lays. Dop th fd dog. Guid th fabic ith you hands hil sing. Slct -M o -L, using th cla vi f uilt foot QV fo sing flat and fim fabics. Dop th fd dog. Guid th fabic ith you hands hil sing. Slct -M o -L, using th satin stitch foot fo sing vaiabl zigzag stitchs. Th fabic is fd by th fd dog and th stitch idth can b vaid ith th kn lift. -M -L Attach a stabiliz to th ong sid of th fabic if ndd. S at slo to mdium spd hil guiding th fabic ith you hands and contolling th stitch idth ith you kn. Whn th machin stops, you can ais and lo th pss foot ith th kn lift. Pupl tip ndl is commndd fo f motion uilting to pvnt skippd stitch. t Maximum Zigzag Width Adjustmnt Th maximum zigzag idth can b limitd to suit you sing nds. Pss th + o ky bsid th maximum zigzag idth stting to limit th maximum zigzag idth to you pfnc. Fo th vaiabl zigzag stitchs ith th satin stitch foot, pss th stting ba t to opn th maximum zigzag idth stting. Maximum zigzag idth stting t Stting ba 93

96 t y CUSTOMIZING MACHINE SETTINGS Machin Stting Mod Pss th st mod ky to nt th machin stting mod. You can slct vaious options and customiz th machin sttings to suit you psonal pfnc. St mod ky Pss on of th 5 kys to slct th mod to customiz. Common Stting Mod In this mod, you can customiz th machin sttings and options fo both odinay sing and mboidy. Odinay Sing Stting Mod In this mod, you can customiz th machin sttings and options fo odinay sing (f to pags fo th opation). Emboidy Stting Mod In this mod, you can customiz th machin sttings and options fo mboidy (f to pags fo th opation). i u t Wi-Fi Stting Mod In this mod, you can st up th Wi-Fi connction (f to pags ). y Languag Slction Mod In this mod, you can slct th dsid languag fo th scn mssags. To bos pags in ach mod, pss th nxt pag ky o pvious pag ky. u Nxt pag ky i Pvious pag ky Rgisting th custom sttings Aft customizing th sttings, pss th OK ky to nabl th n sttings. To cancl th changs to th sttings, pss th X ky and th stting mod indo ill clos. Common Stting Mod Scn Contast You can adjust th contast of th visual touch scn by pssing th + o ky. Sound Volum Th signal sound can b adjustd by pssing th + o ky. St th valu to OFF by pssing th ky sval tims to mut th signal sounds. Inch/mm Option You can st you machin s dimnsional unit to ith inchs o millimts by pssing th inch o mm icon ky. Th dfault unit is millimts. Pss th nxt pag ky to sho th nxt mnu. 94

97 Touch Scn Calibation You can calibat th ky positions of th touch scn if you fl th touch scn ky is not sponding poply. Pss th Ys ky to opn th calibation indo. Pss th + sign ith th touch panl stylus as th sign appas. Whn you pss th last sign, th scn shos END and th calibation indo ill clos. t Fomatting th mmoy If th intnal mmoy of th machin o USB flash div dos not function du to damag to th mmoy bank, you nd to -nabl it by fomatting th mmoy. To fomat th machin s intnal mmoy, pss th machin icon ky and a confimation mssag ill appa. Pss th OK ky to fomat. To fomat a USB flash div, pss th USB icon and th confimation indo ill opn. Pss th OK ky to fomat. t CAUTION: Do not tun off th po o disconnct th USB flash div hil a aning mssag is displayd othis it may damag th mmoy bank. Pss th nxt pag ky to sho th nxt mnu. 95

98 y Sing Light Th sing lights can b tund on o off individually. Pss th cosponding light kys to tun on o off th sing lights. y u u Upp Thad Snso If you nd to un th machin ithout thads, tun off th upp thad snso. Pss th nxt pag ky to sho th nxt mnu. i Standby Tim Th sing lights ill tun off and th machin ill nt standby mod if you do not us th machin ithin th tim piod st by this tim. Doing any opation ill tun th lights and scn on again. Th standby tim can b st fom 1 to 30 minuts. If you ish to tun off th tim, pss and hold th + ky until OFF shos in th tim indo. i!0 o o Scn Sav Pss th ON/OFF ky to tun on th scn sav, and th visual touch scn ill sho th scn sav hn th machin is in standby status. Pss th impot ky to impot a scn sav fom a USB flash div. You can cat an oiginal scn sav ith Scn Sav Tool includd in th Acutools S CD-ROM. Th impotd scn sav data ill b dltd if th dlt ky is pssd, o th intnal mmoy is fomattd (f to pag 95).!0 Impot ky Pss th nxt pag ky to sho th nxt mnu. 96

99 !1 Backgound Colo You can slct fom th coloful allpaps fo th backgound of th visual touch scn by pssing th lvant icon.!1!2 Auto-off Tim Th machin ill b automatically tund off if you do not us th machin ithin th tim piod st by this tim. Th auto-off tim can b st fom 1 to 12 hous. If you ish to tun off th tim, pss and hold th + ky until OFF shos in th tim indo. To tun on th machin again, tun th po sitch on. Th auto-off tim is availabl in EU countis and som gions hich us voltag standads.!2!3 Rst All to Dfaults Pss th Ys ky to st all th paamts to th oiginal valus (factoy sttings). Pss th OK ky to gist th n sttings.!3 97

100 Odinay Sing Stting Mod Auto thad tnsion You can adjust th auto thad tnsion lvl by pssing th + o ky. Lo bobbin thad aning You can adjust th lo bobbin thad aning lvl by pssing th + o ky. To tun off th lo bobbin thad aning, pss th ky until OFF shos in th indo. Ndl stop position Th machin alays stops ith th ndl in th don position xcpt hn sing buttonhols, spcialty stitchs, monogams, tc. Hov you can chang th ndl stop position to up by pssing th ndl up ky. Th machin stops ith th ndl in th don position if Foot-up ky option is tund on, vn if th ndl stop position is st to up position. Pss th nxt pag ky to sho th nxt mnu. Adjustabl Stat-Up Spd Th machin ill stat unning sloly and th sing spd ill gadually incas to maximum. You can slct th dsid stat-up spd fom slo, mdium o high by pssing th cosponding ky, and st th spd fo th stat/stop button o foot contol individually. 98

101 t t Cloth Guid Calibation of th dfault position Th mboidy unit must b attachd ith th caiag am tactd hn calibating. Th dfault position of th cloth guid is 15 mm (5/8 ) fom th cnt ndl dop position. Hov, you can fin tun th dfault position of th cloth guid. Pss th Ys ky and a aning mssag ill appa. Pss th OK ky and th caiag ill mov to th standad position. Pss th ky o ky to adjust th position of th cloth guid. Pss th OK ky. Th mssag is displayd and th caiag ill tun to th hom position. Saving favoit positions If you hav st th cloth guid to you favoit position (f to pag 39), you can sav this position fo futu us. To sav favoit positions, pss th ON/OFF ky to tun ON th sav position option. Pss th nxt pag ky to sho th nxt mnu. 99

102 y Foot hight fo pivoting Whn th foot up option is tund on, th pss foot ill automatically go up hn th machin stops. Th hight of th foot in th up position can b adjustd by pssing th + ky o ky in accodanc ith thicknss of th fabics. y u i u Foot pssu Th foot pssu is automatically optimizd but you can adjust th foot pssu manually by pssing th + ky o ky. i Vaiabl zigzag snsitivity You can adjust th amount of ndl sing against th kn lift movmnt fo vaiabl zigzag in sing applications. Pss th ky so th ndl sings a small amount hn moving th kn lift. Pss th + ky so th ndl sings a lag amount hn moving th kn lift. Pss th nxt pag ky to sho th nxt mnu. 100

103 o Thad Cut aft Auto-Lock Th machin automatically tims th thads aft sing locking stitchs hn this option is tund on. o!0 Favoit Stitch Adjustmnt If you ish to sav th changs to manual stitch sttings, tun on this option by pssing th ON ky. If this option is tund off, th savd manual stitch sttings ill not b applid. Pss th dlt icon!1 to cla th manual stitch stting.!0 This option is availabl fo all stitchs in odinay sing mod xcpt monogam.!1!2!2 Rsum Mod Tun on this option hn you ish to sum th last pattn sn bfo tuning th po sitch off. Whn th po is tund on again, th confimation mssag ill appa. Pss th OK ky to sum th last pattn. Rsum data ill b clad und th folloing conditions: Catd stitch is impotd ith th impot ky. Catd stitch is dltd ith th dlt ky. Catd stitch is dltd, impotd o namd ith Stitch Compos. Th intnal mmoy is fomattd. Aft customizing th sttings, pss th OK ky to nabl th n sttings. 101

104 u i Wi-Fi Stting Mod Conncting Wi-Fi Ntok A ilss out dvic that complis ith th IEEE802.11b/g/n ilss standad is uid fo conncting you machin ith a Wi-Fi ntok. Stating Wi-Fi connction To stat th Wi-Fi sttings, pss ON. Th ntok stting button y is nabld. Pss th ntok stting button y to nt th ntok sttings. Choos on of th 4 mthods to connct ith th Wi-Fi connction (s pags ). t y o 102 Wi-Fi connction Th dfault stting of th Wi-Fi connction is OFF. Pss ON to nabl th Wi-Fi connction. Th Wi-Fi connction and th ntok stting button y a nabld. Pss OFF to disconnct th Wi-Fi connction. Ntok Nam Th nam of th ilss ntok (SSID) connctd ith you sing machin is displayd. Th lock icon o appas if th connctd accss point is scud ith an ncyption ky. IP Addss Th IP addss of you machin is displayd. (DHCP) is displayd in font of th IP addss hn th DHCP option is tund on. Th IP addss can b changd in th ntok sttings. MAC Addss Th MAC addss of th sing machin is displayd. t Sing Machin Nam Th sing machin nam fo ntok idntification is displayd. Th sing machin nam can b changd in th ntok sttings. y Ntok stting button Pss this button to opn th Ntok Sttings indo. u OK ky Pss this ky to confim th Wi-Fi connction stting. i Cancl ky Pss this ky to cancl th Wi-Fi connction stting. If you slct WEP fo th scuity stting of you ilss LAN out, chck th folloings: Slct ASCII fo th ncyption typ. Slct th initial numb fo th ky indx numb (Th initial numb can b 0 o 1, dpnding on th ilss LAN out.). Fo stting up, f to you ilss out s instuctions. Th us of hom appliancs such as a micoav ovn, blutooth dvics o codlss phons can duc th ang of th Wi-Fi connction (if you ilss out's ntok standad is using IEEE802.11b o IEEE802.11g). You may nd to duc th distanc btn you machin and th ilss LAN accss point, o install th ilss LAN accss point at an appopiat location.

105 Ntok Sttings Plas f to you ilss out's instuctions hn th using th push-button o PIN mthod to connct ith th Wi-Fi connction. Wi-Fi Potctd Stup * push-button configuation mthod Pss WPS (PBC). Th WPS Push-Button Sys. dialog box appas on th scn. Pss th Wi-Fi Potctd Stup button on th ilss LAN out. Th dialog box appas and th ilss LAN out ill automatically connct ith you machin. To us th Wi-Fi Potctd Stup push-button configuation mthod, th ilss out must suppot this mthod. Plas also f to th ilss out s instuctions about this mthod. Th machin displays Connction to th ntok faild if it cannot civ th signal fom th ilss LAN accss point ithin 2 minuts. Wi-Fi Potctd Stup PIN mthod If th ilss out suppots th Wi-Fi potctd Stup PIN mthod, you can connct th machin using th mthod. Pss WPS (PIN). Th WPS PIN Cod Systm dialog box appas. Rgist th PIN cod to th out bfo th PIN Cod Systm dialog box is closd to stablish th ntok. To nt th PIN cod to you ilss out, plas f to th instuctions of you ilss out s Wi-Fi Potctd Stup PIN mthod stup. Th machin displays Connction to th ntok faild if th Wi-Fi connction is not stablishd ithin 2 minuts. t u y i Sach fo accss point Pss Sach. Th machin ill sach fo any ilss LAN accss point ithin th ang, and th nams of ntok ill b listd. Th lock icon t appas on th ight sid of th list if th connction uis an ncyption ky to gt connctd. Th signal stngth icon y shos th stngth of th connction signal. Th numb of avs abov th dot indicats th signal stngth of th ilss connction. Pss th ilss ntok nam you ould lik to connct ith. If you cannot find th ilss LAN accss point you a looking fo, pss th fsh ky u to sach fo th ilss LAN accss point again. If th slctd ilss ntok uis an ncyption ky fo connction, th Encyption Ky Enty dialog box appas. B caful to nt uppcas o locas ltts uid. Ent th ncyption ky and pss th OK ky to stablish th ntok. Pss sho/hid ky i to sho o hid th nty. * Wi-Fi Potctd Stup is a tadmak of Wi-Fi Allianc 103.

106 Manual mthod Pss Manual. Ent th ntok nam you ould lik to connct ith. Pss th OK ky. If th slctd ilss ntok uis an ncyption ky fo connction, th Encyption Ky Enty dialog box appas. Ent th ncyption ky and pss th OK ky to stablish th ntok. IP Addss Sttings (ntok sttings) Tun th DHCP option ON to us DHCP to assign an IP addss. t y If you ant to configu th ntok sttings manually, pss th DHCP option OFF, and pss th Ys ky fo th Manual option. Th ntok sttings indo appas. Pss th ao of th itm you ould lik to st, choosing fom IP Addss, Subnt Mask o Dfault Gatay. Ent th stting by pssing th numic kys that appa und th sttings. Pss th ao again to assign th sttings. Pss th OK ky t to confim th ntok sttings. Pss X ky y to cancl th sttings. You do not nd to tun off th DHCP option and configu th ntok sttings manually unlss you kno th appopiat IP addss, Subnt Mask and Dfault Gatay fo this machin. Whn DHCP option of you machin is tund ON, tun on th DHCP option of you ilss out as ll. u i u Sing Machin Nam Sttings Pss Ys ky i to opn th sing machin nam stting scn. Ent th sing machin nam fo th ntok idntification. Pss th OK ky to chang th nam. Pss X to cancl th sttings. o o Dfault ky Pss Dfault ky o to st th Wi-Fi sttings (factoy sttings). 104

107 Languag Slction Mod Slct th dsid languag and pss th OK ky. Th visual touch scn shos mssags in th slctd languag. Cocting Distotd Stitch Pattns Th sing sults of th stitch pattns may vay dpnding upon sing conditions, such as sing spd, typ of th fabic, numb of lays tc. Alays tst s on a scap pic of th fabic that you ish to us. If dcoativ stitch pattns, monogam o th sttch buttonhol is distotd, coct it ith th fd balancing dial. Rmov th cap by using th scdiv tc. Mak su not to scatch th machin body ith th scdiv. St th fd balancing dial at th nutal position fo nomal sing. Cap Fd balancing dial Nutal position + Rtun th fd balancing dial to its nutal position hn th sing is finishd. + Sttch stitch pattn (Q18) If th pattn is compssd, tun th fd balancing dial in th diction of +. If th pattn is dan out, tun th fd balancing dial in th diction of. + Ltts and numbs If th pattn is compssd, tun th fd balancing dial in th diction of +. If th pattn is dan out, tun th fd balancing dial in th diction of. Stitch balanc of th sttch buttonhols (B8) If th ight o is dns, tun th dial in th diction of +. If th lft o is dns, tun th dial in th diction of. 105

108 57.5 cm (22-5/8 ) EMBROIDERY MODE Emboidy Unit 25 cm (10 ) B su to povid sufficint spac aound th machin to allo th hoop to mov fly. Do not plac anything insid th aa shon on th lft. z Attaching th mboidy unit z Tun th po sitch off. Rmov th cov fom th machin. Po sitch Cov Alays attach th xtnsion tabl xcpt hn using th f-am hoop (FA10a). x x Plac th mboidy unit on th back sid of th machin bas, matching th small dots as shon. Emboidy unit Small dots c c Slid th mboidy unit along th machin to th ight and push th mboidy unit fimly until it fits sculy. 106

109 z Extnding th caiag am z Pss don th caiag am las lv to xtnd th caiag am. Caiag am las lv Caiag am x x Sing out th caiag am until it locks in th fully xtndd position. CAUTION: Do not push on th caiag am hn it is xtndd. Do not focfully mov th caiag o caiag am by hand. Do not hold th caiag o caiag am hil it is moving. Failu to follo ths instuctions may sult in damag to th caiag mchanism. CAUTION: Nv mov th caiag by hand gadlss of hth th po is on o off, othis th machin may b damagd hn opning th caiag am. B su that th caiag is at th hom position hn opning th caiag am (a tiangl mak on th caiag matchs ith a ba sign on th caiag am). Tiangl mak Ba sign 107

110 z Dtaching th mboidy unit B su to mov th mboidy unit hn caying o stoing th machin. If th ndl is in don position, mak su to ais th ndl by pssing th ndl up/don button. z Rmov th hoop fom th caiag and tun th caiag to th hom position (f to pag 128). x WARNING: B caful not to gt you fing caught btn th mboidy unit and machin bd ith th xtnsion tabl movd hn th caiag tuns to hom position. x Push don th caiag am las lv to tact th caiag am. Caiag am las lv Caiag am c c Tun th po sitch off. Push th mboidy unit las button. Slid th mboidy unit to th lft and mov it. Po sitch Emboidy unit las button v v Attach th cov to th machin. t Cov t 108

111 z Attaching th Emboidy Foot Us th mboidy foot P fo mboidy. z Tun th po sitch on. Tun th handhl toad you to ais th ndl its highst position. Pss th lockout ky and ais th pss foot ith th pss foot lift. Lockout ky Pss foot lift x x Loosn th thumbsc ith th scdiv and mov th foot hold. Thumbsc Foot hold c t c Attach th mboidy foot P to th pss ba fom bhind. Tightn th thumbsc patially by hand. t Emboidy foot P v v Lo th foot ith th pss foot lift. Tightn th thumbsc sculy ith th scdiv. 109

112 z Attaching th Staight Stitch Ndl Plat Us th staight stitch ndl plat fo mboidy. CAUTION: Alays mak su to pss th lockout ky to lockout th machin bfo placing th ndl plat. z Rais th ndl and pss th lockout ky. Pss th pss foot lift button to ais th pss foot. Slid th xtnsion tabl to th lft to mov it. Push don th ndl plat las lv and th ndl plat ill snap off. A mssag ill appa aning that th ndl plat is not scud. Rmov th ndl plat to th ight. Lockout ky Pss foot lift button Ndl plat las lv x x Plac th staight stitch ndl plat on th machin. St th lft dg of th ndl plat into th opning. c c Push don on th mak of th ndl plat until it locks in plac. Mak su th aning mssag disappas and th staight stitch is automatically slctd. Tun th handhl sloly and mak su that th ndl dos not hit th ndl plat. Pss th lockout ky to unlock. CAUTION: Nv pss th ndl plat las lv hil unning th machin. 110

113 Spcial Bobbin Hold fo Emboidy Rplac th standad bobbin hold ith th spcial bobbin hold fo mboidy hn using bobbin thads oth than Janom bobbin thad fo mboidy. Th spcial bobbin hold is makd ith a yllo dot fo idntification. Yllo dot z z Rmov th ndl plat (f to th pvious pag). Tak out th standad bobbin hold. Standad bobbin hold x t x Inst th spcial bobbin hold into th hook ac. Mak su to match th knob of th bobbin hold ith th stopp on th machin. Attach th ndl plat. Knob Stopp t Spcial bobbin hold fo mboidy Us th standad bobbin hold hn sing lac dsigns and uilting dsigns that us th sam thad fo th bobbin as th ndl thad. 111

114 Emboidy Hoops Th a 3 mboidy hoops includd in th standad accssois. Emboidy hoop SQ14a A sua mboidy hoop ith a 14 cm (5 1/2 ) sua mboidy aa. Emboidy hoop RE20a A sua mboidy hoop ith a 17 cm (6 11/16 ) by 20 cm (7 7/8 ) mboidy aa. Emboidy hoop FA10a A f am mboidy hoop ith a 10 cm by 4 cm (3.9 by 1.6 ) mboidy aa. Blocking plat t t Magntic clamp A magntic clamp fo holding th fabic to th mboidy hoops. 112

115 Stabilizs To cat th bst uality mboidy, it is impotant to us stabilizs. Ho to us: Attach th stabiliz to th ong sid of th fabic. You may nd to us mo than on lay. Fo fim fabics, you may plac a thin sht of pap und th fabic. Th non-adhsiv typ should b usd hn mboiding fabic hich cannot b iond o fo sctions hich a difficult to ion. Cut th stabiliz lag than th mboidy hoop and st it on th hoop so that th nti pic is fastnd to th hoop to pvnt any loosnss in th fabic. Attaching th stabiliz Plac th ong sid of fabic and th glossy sid of th stabiliz togth. Fold up a con of th stabiliz and fus it ith an ion. Fold up a con of th stabiliz, to mak it asi to pl off th xcss stabiliz aft stitching. Ioning tmpatus vay dpnding on th kind of adhsiv stabiliz you a using. Typs of th stabilizs Typ Ta-aay Ion-on Cut-aay Wat solubl Hat-aay Usag Stabl ovn fabics Knits and all kinds of unstabl fabics Knits and all kinds of unstabl fabics Cutok o lac mboidy Right sid of loopd fabics such as tols to avoid loops coming though th mboidy Cutok o lac mboidy Popty Mad fom a fib that ill ta asily. Adhsiv typ fusibl ith an ion. Non-ovn fabic that dos not ta. A thin film o non-ovn fabic that ill dissolv in at. A thin film that ill mlt aay ith hat. Sticky typ stabilizs can b usd only fo scuing a small pic of fabic o ok that cannot b scud in th hoop, o fo scuing vlvt and oth nappd fabic that ould b pmanntly makd by th hoop. Clan th bobbin hold aft stitching as glu can gt stuck on it. 113

116 z Stting th Fabic in an Emboidy Hoop z Ppa a fabic and attach a stabiliz to th ong sid of th fabic. Th fabic and stabiliz should b lag than th hoop siz. Da th cntlins on th fabic ith tailo s chalk. Fabic Cntlins x x Lay th inn hoop and tmplat on th fabic, matching th cntlins of th fabic ith th tmplat. Inn hoop Tmplat c c Loosn th hoop tightning sc on th out hoop. Plac th inn hoop and fabic on th out hoop. t Hoop tightning sc y Out hoop y v i t v Push th inn hoop and fabic into th out hoop. Tightn th sc on th out hoop to sttch th fabic. Mak su that th fabic is sttchd tightly in th hoop. Clamp th fabic to th hoop ith th magntic clamps. u Magntic clamp u Mak su to match th alignmnt maks of th out and inn hoops hn sttching th fabic. i Alignmnt maks b b Rmov th tmplat. Thick lays of fabic and stabiliz may caus skippd stitchs, o bokn thads and ndls. Avoid sing on th lays thick than 3 mm (1/8 ). 114

117 z Attaching th Emboidy Hoop to th Machin z Tun th po sitch on and opn th caiag am. Pss th mod sitch ky and a aning mssag ill appa. Pss th OK ky and th caiag ill mov to th stating position. Th visual touch scn ill display th mboidy mod indo. Mod sitch ky If you pss th mod sitch ky ith th caiag am tactd, a confimation mssag ill appa. Do not pss th OK ky o X ky. Instad, opn th caiag am. x x Plac th hoop on th machin and attach th hoop to th caiag by insting th lock pin of th hoop into th hol in th caiag. Tun th knob clockis to scu th hoop. Lock pin Hol Thad Hold To avoid sing ov a tail of th ndl thad, plac th thad nd on th thad hold. Thad hold Pass th ndl thad though th hol in th mboidy foot and da it up to th thad hold. Hang th thad on th thad hold fom font to back. 115

118 Slcting Built-in Emboidy Dsigns Pss th built-in dsign ky and th dsign list by catgoy ill opn. Built-in dsign ky Pss th dsign catgoy ky to bos th dsign list by catgoy, o pss th hoop slction ky to bos th dsigns by hoop siz. Dsign catgoy ky Hoop slction ky Dsign catgoy Pss th dsign catgoy ky to sho th dsign lists by catgoy. Pss th pvious/nxt pag kys to bos th dsign lists. Pvious pag ky t Nxt pag ky t Pag 1 of 4 Anna Maia Hon Dsigns Flouish Alphabt Coss Stitch Dsigns Emboidy Lac Dsigns Pag 2 of 4 Couching Dsigns Dcoativ Dsigns Favoit Dsigns Combination Dsigns Pag 3 of 4 HANA Styl Chaacts Dsigns Quilting Dsigns Sashiko Dsigns KANJI Dsigns Pag 4 of 4 Calibation Pattn Pss th dsid catgoy to slct and th pattn slction indo ill opn. Bos th pattn list ith th pvious/nxt pag kys, and slct th dsid pattn by pssing th pattn icon ky. 116

119 Hoop siz Pss th hoop slction ky and th hoop slction indo ill opn. Slct th sam hoop as th on attachd to th machin. Bos th dsign list ith th pvious/nxt pag kys, and slct th dsid pattn by pssing th pattn icon ky. Th visual touch scn ill sho th hoop confimation indo. Monogamming Pss th monogam ky and th monogam indo fo Gothic font ill opn. Pss th font slction ky to opn th font slction indo. Monogam ky Font slction ky You can slct on of th 20 fonts fo monogamming as ll as 2-ltt, 3-ltt, bod pattns and nomal s pattns. Th folloing fonts and pattns a availabl: Pag 1 of 2 Gothic font Scipt font Chltnham font Bauhaus font Galant font Typist font Bush font Fist Gad font Holloblock font (upp cas only) Jupit font (upp cas only) Pag 2 of 2 Mico Gothic font Cyillic 1 Cyillic 2 Cyillic 3 Mincho Maumoji Bod pattns Nomal S pattns (pattns simila to odinay stitchs) 2-Ltt 3-Ltt 117

120 Pss th icon ky of th dsid font and th monogam indo ill opn. Bos pags ith th pvious/nxt pag kys. You can nt alphabt ltts, numbs, symbols and Euopan ltts. Pvious pag ky Nxt pag ky Th hight of Mico Gothic font is appoximatly 5 mm. i o Function kys Font slction ky Pss this ky to opn th font slction indo. Ltting ointation ky Pss this ky to slct th hoizontal o vtical ointation. u y t u Ltt siz ky You can slct th folloing 3 ltt sizs by pssing this ky. Th appoximat ltt sizs of upp cas a as follos: L (Lag): 30 mm (1.2 ) M (Mdium): 20 mm (0.8 ) S (Small): 10 mm (0.4 ) Ltt cas ky Pssing this ky changs th ltt cas fom upp cas to lo cas and vic vsa. t Dlt ky Pss this ky to dlt th chaact abov th cuso o th chaact in font of th cuso. y Sav fil ky Pssing this ky opns th sav fil indo and allos you to sav th txt o monogam as a fil. u Cuso ky Pss ths kys to mov th cuso to th lft o ight. i OK ky Pss this ky to confim you nty and opn th mboidy scn. o X ky Pss this ky to xit th monogam nty.!0 Spac adjust ky This ky is activatd only hn a spac is ntd. If th spacs btn chaacts look unvn, inst a blank spac btn chaacts and adjust th spac idth to justify. Pss this ky to opn th spac adjustmnt indo. To incas th spac idth, pss th + ky. To dcas th spac idth, pss th ky.!0 Th spac idth is shon only in millimts. 118

121 Pogamming a monogam Exampl: Pogamming R&B in Gothic styl font. Ent R, th cuso shifts to th ight and R is automatically mmoizd. Pss th ltt siz ky and slct small siz. Ltt siz ky Ent &, th cuso shifts to th ight and & is automatically mmoizd. Pss th ltt siz ky and slct mdium siz. Ent B, th cuso shifts to th ight and B is automatically mmoizd. Pss th OK ky and a aning mssag ill appa. Pss th OK ky and th caiag movs to th stating position. Th hoop confimation indo ill appa. Pss th OK ky. Th scn changs to th ady to s indo. Colo chang You can s a multi-colod monogam by changing th thad colo of ach ltt if you pss th colo chang ky bfo sing. Th machin ill stop automatically hn ach chaact has bn sn. Chang th thad to th nxt colo and stat sing again. Colo chang ky Monogam placmnt You can slct on of 3 monogam placmnts: lft justify, cnt justify and ight justify. Lft Justify Pss th ky to stat sing fom th lft nd fnc lin on th tmplat. Cnt Justify Pss th ky to s in th cnt of th hoop. Right Justify Pss th ky to s fom th ight nd fnc lin on th tmplat. 119

122 z 2-Ltt monogam Exampl: 2-Ltt in an octagon z Pss th font slction ky. Slct 2-ltt. x x Slct th octagon. c c Ent A and B. Pss th OK ky and a aning mssag ill appa. Pss th OK ky and th caiag movs to th stating position. Th hoop confimation indo ill appa. Pss th OK ky. Th scn changs to th ady to s indo. Th 3-ltt monogam is sn in th sam ay as th 2-ltt monogam. Th stating position fo th 2-ltt and 3-ltt monogam is in th cnt of th hoop. 120

123 Editing a monogam z Dlting a chaact: Dlting R fom MART z Pss th cuso ky to mov th cuso und R. x x Pss th dlt ky and ltt R is dltd. z Insting a chaact: Insting E into MAT z Pss th cuso ky to mov th cuso und A. x x Ent E. Th ltt E is instd bfo A. 121

124 Rady to S Windo Th ady to s indo shos mboidy function kys and infomation on th slctd pattn. Pss th don ao ky t o up ao ky y to sho th nxt st of function kys (u to!0).!2 y t!1 u i o!0 Function kys Colo sction ky Tac ky Thad colo/jog ky Fin position/angl adjustmnt ky t Don ao ky y Up ao ky u Colo list ky i Adjust ky o Hoop back ky!0 Emboidy foot ky!1 Stitch foad ky!2 Stitch back ky!3 Jump ky!4 Jog kys!3!4 i o t y u Pattn infomation Th visual touch scn displays th folloing dtails: Hoop siz Dimnsion of th dsign Maximum sing spd Emboidy foot hight t Numb of thad colos (lays) y Ruid sing tim u Tnsion stting i Pvi indo o Coss mak (cunt sing point)!0 Pogss ba!1 Stitch count!2 Thad colo!0!2!1 122

125 t Stitch back/foad kys Pss th ky to mov th hoop back to a pvious sing point. Pss th + ky to mov th hoop ahad. Th hoop ill mov on stitch ach tim th ky is pssd. Hold don th ky to tavl fast and jump 10, 100 o 500 stitchs at a tim. Th stitch count and th total numb of stitch count a displayd in th stitch count indo. You can us ths kys to mov th mboidy hoop to h th thad has bokn o un out. Stitch back ky Stitch foad ky Stitch count Total numb of stitch count u y Th pal blu ba in th stitch count indo is th pogss ba. Th pogss ba t appas hn th stitch count incass, and indicats th pogss of th mboidy sing pojct. Whn th pojct is compltd, th pogss ba tuns to 0. t Pogss ba i o Jump ky If you ant to jump to th dsid sing point dictly, pss th jump ky y and th numic kypad indo u ill opn. Ent th dsid stitch count numb and pss th OK ky. Th hoop movs to th sing point you ntd. y Jump ky u Numic kypad indo Coss mak Th coss mak o in th pvi indo i indicats th cunt sing point. Pss th pvi indo i to hid th coss mak. i Pvi indo o Coss mak (Cunt sing point)!0 Colo sction ky Pss this ky!0 to sho th complt imag of th slctd dsign o patial imag of ach colo sction only. To vi th nxt colo sction, pss th nxt pag ky!2. To vi th pvious colo sction, pss th pvious pag ky!1. If you ant to s th spcific colo sction only, pss th nxt/pvious colo kys until th dsid sction is displayd.!0 Colo sction ky!1 Pvious pag ky!2 Nxt pag ky!1!2 123

126 Tac ky You can chck th siz of th mboidy aa by tacing th pattn outlin ithout stitching o ith basting stitchs. You can also customiz th tacing and basting siz. Pss th tac ky and th tac option indo ill opn. Tac ky Th machin ill bast aound th mboidy aa ith a 5 mm alloanc hn kys a pssd. Hov, th alloanc ill b null if th pattn spads ov th maximum limit of mboidy aa. Lo th pss foot if th pss foot is aisd ith th pss foot lift hn tacing and basting. Th folloing 4 options a availabl: 1. Tac ithout stitching Pss th ky to opn th tac ithout stitching indo. Pss th tac ky to stat tacing o pss on of th kys to mov th hoop to a con. 2. Tac and bast (singl) Pss th ky to opn th tac and bast (singl) indo. Pss th stat/stop button to stat tacing ith basting stitchs. 3. Tac and bast (doubl) Pss th ky to opn th tac and bast (doubl) indo. Pss th stat/stop button to stat tacing ith basting stitchs. Fist, th machin basts insid th pattn thn tacs th pattn outlin ith basting stitchs. 124

127 t y 4. Custom tac and bast Th machin ill bast aound th mboidy aa ith a 5 mm alloanc hn kys a pssd. Hov, you can customiz th tacing and basting aa siz by pssing ky t. You can st th tacing and basting aa by indicating th lft upp con and lo ight con of th tacing and basting aa. Pss th ky t to opn th custom tac and bast indo. Th siz of th tacing and basting aa is displayd in th cnt of th indo y. u Pss th ky u and a aning mssag ill appa. Pss th OK ky and th caiag movs to th lft upp con of th basting aa. Pss jog kys i to mov th caiag to th dsid position. i o Pss th ky o and th caiag movs to th ight lo con of th basting aa. Pss jog kys i to mov th caiag to th dsid position. Pss th tac ky!0 to tac th st aa ithout basting. To tac and bast, pss th stat/stop button.!0!1 i To tun to th tac and bast aa to thi dfault sttings, pss th dfault ky!1. To clos th tacing option indo, pss th X ky. Thad colo/jog ky Pss th thad colo/jog ky to sho o hid th jog kys. Th thad colo list of th slctd dsign is displayd hn th jog kys a hiddn. Adjust th hoop position ith th jog kys so that th ndl position coms ight abov th cnt of th fnc lins on th fabic. Thad colo/jog ky Thad colo list Jog kys 125

128 Fin position/angl adjustmnt ky You can mak fin adjustmnts to th position o angl of th mboidy dsign ithout moving th mboidy hoop fom th machin. Pss th fin position/angl adjustmnt ky. Th oiginal mboidy dsign position is pvid as a ctangl. Rotating a dsign You can mak fin adjustmnts to th angl of th mboidy dsign. Pss th ky to otat th dsign 0.5 dgs clockis. Pss th ky to otat th dsign 0.5 dgs countclockis. Th angl valu is displayd in th indo t. t Th angl of an mboidy dsign can b adjustd fom -5.0 to 5.0 dgs. Th angl of th mboidy dsign cannot b adjustd to xcd th sing aa. i o Moving a dsign You can mak fin adjustmnts to th position of th mboidy dsign. Pss th angl/mov ky!0. Th jog kys appa on th scn. Pss th o kys y to mov th dsign 0.5 mm ight o lft (X indo i). Pss th o kys u to mov th dsign 0.5 mm foad o backad (Y indo o). Th moving distanc fom th oiginal position is shon as coodinats in th X and Y indos. u y!0!2!3 Th position of an mboidy dsign can b fin adjustd fom -5.0 mm to 5.0 mm. Th position of th mboidy dsign cannot b adjustd to xcd th sing aa. Th moving distanc fom th oiginal position is shon only in millimts.!1 Th d ctangl!1 appas hn you mak fin adjustmnts to th mboidy dsign, and it shos th diffnc btn th oiginal position and th adjustd position. Pss th OK ky!2 to apply th fin adjustmnt. Pss th X ky!3 to cancl th sttings. 126

129 Colo list ky Pss th don ao ky o up ao ky to sho th nxt st of function kys. Pss th colo list ky to vi a list of thad colos mployd in th slctd dsign. t Pss th stitch numb ky to vi a numb of stitchs fo ach colo in th slctd dsign. Pss th spool ky t to vi a list of thad colos mployd in th slctd dsign. Adjust ky Pss th adjust ky to opn th manual stting indo. You can adjust th folloing sttings in this indo. y Adjust ky y u Auto thad tnsion lvl Pss th + o ky to adjust th thad tnsion to you pfnc.!0!2 u i o!1 127 i Cutting th tails of jump thads This option can b usd hn th jump thad cutting lngth stting o cutting command is activatd (f to pag 154). Pss th + o ky to adjust th tail lngth of jump thad. o Emboidy foot hight Pss on of th fabic icon kys (!0 o!1 )to slct th commndd hight o pss th + o ky to fin tun th foot hight.!0 Plain fabic ky!1 Quilting ky To tun th manual sttings to thi dfault sttings, pss th dfault ky!2. Pss th OK ky to apply th sttings. Pss th X ky to cancl th sttings.

130 Hoop back ky Pss th ndl up/don button to ais th ndl at its highst position if th ndl is in don position. Pss th hoop back ky. Th mboidy foot ill b aisd automatically, and th hoop back option indo ill opn. Pss th ky and th confimation indo opn. Pss th OK to mov th caiag back to th hom position and tun to th Rady to S scn. Pss on of th kys to mov th caiag to a standby position. Pss th X ky to clos th hoop back option indo. Hoop back ky Pss th hoop back ky o th stat/stop button. Th caution mssag appas. Pss th OK ky and th hoop ill go back to th oiginal position. 128

131 Emboidy foot ky Pss this ky to opn th mboidy foot indo. Pss on of th pss foot icon ky (, o ). Th pss foot hight and th sing spd ill b automatically adjustd to suit th slctd pss foot. Emboidy foot ky Emboidy foot (P) Couching foot (PC-1) Couching foot (PC-2) Slct and attach couching ft (PC-1 o PC-2) only hn slcting Couching Dsigns (f to pag 149). 129

132 z Stating to S Emboidy z Slct th dsid pattn. Pss th thad colo/jog ky. Th jog kys appa. Thad colo/jog ky Jog ky x x Adjust th hoop position ith th jog kys so that th ndl position coms ight abov th cnt of th cntlins on th fabic. c c Pss th stat/stop button and s 5 to 6 stitchs. Pss th stat/stop button again to stop th machin. Th pss foot ill b aisd automatically. Cut th loos thad clos to th bginning of th stating point. Loos thad Pss th stat/stop button to stat sing again. Th machin ill stop (and tim th thads if th auto thad cutting is activatd) automatically hn th fist colo sction is finishd. Chang th thad to th nxt colo and s th nxt sction. You can adjust th sing position ith th jog kys duing th sing if ncssay. Pss th stat/stop button to stop th machin. Pss th jog kys to mov th hoop at th dsid position. Pss th stat/stop button again to continu sing. Th ndl dop position ill sum th oiginal position aft all th colo sctions a finishd. Sing sults Th mboidy pattn is sn against th cntlins on th fabic as shon. Cntlins on th fabic Rf to pag 154 fo ho to st auto thad cutting. 130

133 Editing Mod In th diting mod, you can dit and combin pattns to cat oiginal mboidy dsigns. Pss th diting mod ky and th diting indo fo th hoop RE20a ill opn. Editing mod ky z Slcting a hoop siz You can slct oth hoop sizs. z Pss th hoop slction ky and th hoop slction indo ill opn. Hoop slction ky x x Pss th hoop icon ky to slct th dsid hoop. Slct th dsid hoop. Th scn ill tun to th diting indo. In th diting mod, you cannot slct pattns lag than th siz of th slctd hoop. Opning th mboidy dsigns You can opn th built-in dsigns, monogam, and dsigns fom th USB flash div in th diting indo. To opn dsign pattns, pss th hom ky. Pss th built-in dsign ky. Slct th dsid pattn fom th dsign chat (f to pags ). Hom ky Built-in dsign ky 131

134 t y u Editing tool ba infomation Th diting tool ba contains th folloing kys as shon. Pss th nxt st ky to sho th nxt st of diting tools. Pss th pvious st ky to sho th pvious st of diting tools. Layout kys Nxt st ky Pvious st ky Scoll ky t Zoom ky y Hoop slction ky u Duplicat ky i Dlt ky o Rsiz ky!0 Rotat ky!1 Hoizontal mio imag ky!2 Vtical mio imag ky!3 Ac ky!4 Sing od ky!5 Cnt position ky!6 Con layout ky!7 Custom colo ky!8 Goup ky!9 Colo goup Singl colo sing Sav fil ky (f to pag 157) Slcting a pattn To slct th pattn to dit, pss on th pattn imag in th diting indo. Th gn fam appas aound th slctd pattn. Moving a pattn To mov th mboidy pattn in th diting indo, pss and dag th pattn to a dsid location ith th touch panl stylus o you fingtip. Do not dag th pattn on th scn ith a shap pointd objct. You can mov th slctd pattn also by pssing th layout kys. Pss th layout kys to mov th pattn to th dsid position in th diting indo. Pss th cnt position ky to mov th pattn to th cnt of th diting indo. Layout kys Cnt position ky Th caiag ill not mov hn you pss th layout kys sinc th pattn position ill mov lativ to th hoop, not to th machin. 132

135 Zooming in th diting indo Pss th zoom ky to opn th zoom in/out indo. Slct th vi siz fom nomal, lag o lagst by pssing on of th vi siz kys. Zoom ky Nomal vi siz ky Lag vi siz ky Lagst vi siz ky Th scoll function is activatd automatically hn zoomd in. To scoll th magnifid indo, dag th indo in th dsid diction. Pss th scoll ky to cancl th scoll command. t Scoll ky t z x Duplicating a pattn z Pss th duplicat ky to mak a copy of th slctd pattn. Duplicat ky x Th duplicatd pattn ill b supimposd ov th oiginal pattn. Mov th duplicat to sho th oiginal pattn. 133

136 z x Dlting a pattn z Pss on th pattn to dlt. x Pss th dlt ky to dlt th slctd pattn. Dlt ky z x Rsizing a pattn z Pss th siz ky to opn th siz option indo. Rsiz ky x You can chang th mboidy pattn siz fom 80% to 120% of th oiginal siz. Pss th + ky to nlag th pattn siz. Pss th ky to duc th pattn siz. Th siz ill chang 1% ach tim you pss th + o ky. To chang th siz uickly, pss and hold th + o ky. Th scal of a sizd pattn is displayd in pcntag. Pss th OK ky to confim th n siz. 134

137 z x Rotating a pattn z Pss th nxt st ky to sho th nxt st of diting tools. Pss th otat ky to opn th otation option indo. Rotat ky x Pss th ky to otat th slctd pattn 1 dg clockis. Pss th ky to otat th slctd pattn 1 dg countclockis. Pss th ky t to otat th slctd pattn 45 dgs clockis. Pss th ky y to otat th slctd pattn 45 dgs countclockis. Th angl of a otatd pattn is displayd in th indo u. Pss th OK ky to confim. u y t z x Flipping a pattn z Pss th vtical o hoizontal mio imag ky. Hoizontal mio imag ky Vtical mio imag ky x Pss th ky to cat th hoizontal mio imag of a slctd pattn. c c Pss th ky to cat th vtical mio imag of a slctd pattn. 135

138 Monogamming in an ac In th diting mod, you can mak a monogam in an upp o lo ac. z Ent th chaacts and pss th OK ky. z x x Th ntd chaacts a displayd in th diting indo. Pss th ac ky and th ac layout indo ill opn. Ac ky c c Pss th upp ac ky to mak an upp ac. Pss th lo ac ky to mak a lo ac. Pss th nlag ky to mak an ac long. Pss th shotn ky t to mak an ac shot. Pss th OK ky to confim. Upp ac ky Lo ac ky Enlag ky t Shotn ky t 136

139 Sing od You can chang th sing od of a pattn combination. Pss th sing od ky and pss on th imags of th pattn on by on. Th pattns ill b sn in th od you pss on th imags. Pss th sing od ky again to tun to th pvious scn. Sing od ky z x Cnt positioning You can mov th slctd pattn to th cnt position. z Pss on th pattn to mov. x Pss th cnt position ky to mov th slctd pattn to th cnt position. Cnt position ky Whn using th mboidy hoop FA10a, th slctd pattn ill b movd to th cnt of th limitd mboidy aa if th mboidy aa is limitd ith th opning idth ky (s pag 148). Con layout z Slct pattn Favoit Dsigns FA10a-3. Mov th dsign up and to th ight. z x x Pss th con layout ky. Th pattn ill automatically b copid and placd symmtically into 4 cons. Con layout ky 137

140 z Customizing th display colos You can simulat th colos of th actual fabic and thads on th scn by customizing th colos of th dsign imag and diting indo. z Pss th custom colo ky and th custom colo indo ill opn. Custom colo ky x x If you ish to chang th colo of th dsign pattn, pss th dsign colo ky. Pss th scoll kys until th dsid sction is displayd in th pvi indo. Dsign colo ky Scoll kys To slct th hu, pss on of th 12 colo tils. Colo tils i t To chang th shad of th slctd colo, pss nxt pag ky, pvious pag ky, o dag th slid to th lft o ight. t Slid y Nxt pag ky u Pvious pag ky You can assign a nam to th customizd colo fo th colo sction by pssing th nam ky. Th assignd nam ill b displayd instad of th nam and cod of th thad colo in th mboidy indo. i Nam ky u y c o!0 c To chang th backgound colo, pss th backgound colo ky and slct th dsid colo. To slct th hu, pss on of th 12 colo tils. To chang th shad of th slctd colo, pss nxt pag ky, pvious pag ky, o dag th slid to th lft o ight. o Backgound colo ky If a dsign in *.JPX fomat has a backgound imag, you can display th backgound imag in th diting indo by pssing th backgound imag ky.!0 Backgound imag ky 138

141 z Gouping pattns z You can goup pattns togth. Pss th nxt st ky to sho th nxt st of diting tools. Pss th goup ky and th gouping option indo ill opn. Nxt st ky Goup ky x x Pss th goup all ky and pss th OK ky to goup all th pattns in th diting indo. Goup all ky c c If you ish to goup th slctd pattns only, slct th dsid pattns by pssing on th pattn imags. Pss th slctd pattn again to dslct th pattn. To dslct all th pattns, pss th dslct ky. Pss th OK ky to goup th slctd pattns. Dslct ky v v Th goupd pattns can b movd and duplicatd as a unit. Whn gouping th slctd pattns only, th st of th pattns a gayd out and cannot b slctd. To ungoup th pattns, pss th goup ky again. 139

142 Colo gouping Whn combining duplicatd pattns, you can duc th numb of colo sctions ith colo gouping. z z Fo xampl, th combind dsign pattn has 12 colo sctions. x x Pss th colo goup ky and th colo gouping indo ill opn. Pss th OK ky to unit all colo sctions of th sam colo and th ady to s indo opns. Colo goup ky c c Th numb of colo sctions is ducd to 3. Colo gouping ill b canclld hn tuning to th diting indo. 140

143 z x Singl colo sing If you ant to s a pattn o a pattn combination in on colo only, pss th singl colo sing ky. Th machin ill not stop until th nti dsign is sn. z Pss th singl colo sing ky. x Pss th OK ky. c c Th dsign(s) ill b displayd in gay. Pss th stat/stop button to stat singl colo sing. Th dsign ill b sn ithout stopping fo colo chang. 141

144 z Emboidy Lac Dsigns You can attach th lac pics in th Dsigns fo at solubl stabiliz catgoy to a backgound fabic ith th lac dsigns in th Dsigns fo fabic catgoy to achiv a th-dimnsional appaanc. Exampl: Buttfly dsign (FA10a-1) z Attach th at solubl stabiliz to th hoop. B su that th stabiliz is sttchd tightly in th hoop. Slct Dsigns fo at solubl stabiliz. Pss th pag ky. Slct th dsign FA10a-1 and s. Rmov th at solubl stabiliz fom th hoop. Tim aay th at solubl stabiliz suounding th dsign pattn ith scissos. Rmov th at stabiliz by soaking th buttfly ing dsign into a bol of am at. x x Attach th backgound fabic to th caiag. Slct Dsigns fo fabic. Pss th pag ky. Slct th dsign FA10a-1 and s th fist and scond sctions (colo). c c Th scond sction is th placmnt guid fo placing buttfly ings. Backgound fabic Placmnt guid (scond sction) v v Plac th buttfly ings pic hich as catd in pocdu z abov so that th buttfly ings a alignd ith th placmnt guid. Us tap to hold th dsign fo you convninc. B su that th lac pic to b attachd is compltly did out aft moving fom at. 142

145 b S th thid sction (colo) ov th dsign. Th buttfly ings a attachd to th backgound fabic. S th st of th sction (colo) and mov th tap to complt th dsign. Th oth buttfly dsign also uis a combination of th at solubl stabiliz dsign FA10a-2 and th fabic dsign FA10a-2. Plac th buttfly ing pic on th placmnt guid and continu sing. Placmnt guids of Dsigns fo fabic Each mboidy dsign in Dsigns fo fabic catgoy contains a placmnt guid sction fo placing dsigns fo at solubl stabiliz. Aft th placmnt guid is sn, th machin ill s ov th lac pic ith th nxt sction (colo) to hold th pic. Th placmnt guids and thi sn ods a indicatd blo. Plac th dsid lac pic on th placmnt guid and hold it ith tap. S ov th lac pic ith th nxt sction to hold th pic. FA10a-1 2nd sction FA10a-2 FA10a-3 4th sction 2nd sction FA10a-4 FA10a-5 2nd sction 3d sction FA10a-6 FA10a-7 1st sction 1st sction SQ14a-5 SQ14a-1 2nd sction SQ14a-2 SQ14a-3 2nd sction 3d sction RE20a-1 4th and 6th sctions 5th, 6th, 7th 8th and 9th sctions 143

146 z Lac Dsign RE20a-1 (Dsigns fo at solubl stabiliz) You can attach up to 4 flo dsigns to th lag lac dsign (Dsigns fo at solubl stabiliz) RE20a-1. x c z Ppa th flo dsigns you ant to attach bfo sing th lac dsign RE20a-1. Slct th dsid flo dsigns fom th Dsigns fo at solubl stabiliz catgoy, and s thm to th at solubl stabiliz. Rmov th at stabiliz by soaking th flo dsigns into a bol of am at. x Da cntlins on th at solubl stabiliz ith tailo s chalk. St th at solubl stabiliz in th hoop RE20a and attach th hoop to th caiag. Slct th RE20a-1 dsign (Dsigns fo at solubl stabiliz). c S until th 11th sction (colo). Th 11th sction is th placmnt guid fo placing flo dsigns. Plac on of th flo dsign pics hich as catd in pocdu z abov so that th flo dsign is alignd ith th placmnt guid. v v Us tap to hold th dsign fo you convninc. S th 12th sction (colo) ov th dsign. Th flo dsign is attachd to th lag lac RE20a-1 dsign. b b S th st of th sctions. Th 13th, 15th and 17th sctions a th placmnt guids. Plac th flo dsigns catd in pocdu z and s ov flo dsigns (sam as don in pocdu v). Rmov th dsign fom th hoop. Rmov th at stabiliz by soaking th ovall dsign into a bol of am at to complt th dsign. 144

147 z Conncting Lac Dsign RE20a-1 (Dsigns fo at solubl stabiliz) You can connct th lag lac dsign RE20a-1 vtically o hoizontally. Exampl: Conncting th Lac Dsign RE20a-1 vtically z Da cntlins on th at solubl stabiliz ith tailo s chalk. Th at solubl stabiliz and vtical lin should b long nough to connct folloing pattns. x x St th at solubl stabiliz in th hoop RE20a and attach th hoop to th caiag. Slct th dsign RE20a-1 (Dsigns fo at solubl stabiliz). c c Pss th stat/stop button and s. Rmov th hoop fom th caiag and th stabiliz fom th hoop. 145

148 v v Plac th tmplat sht on th fabic. Align th coss maks of th sn pattn and tmplat sht. To pint out th tmplat sht, f to on-scn hlp of EmboidyEdito in Acutools S. Coss mak b Mak th points of th hoizontal cntlin fo th scond pattn. Da th hoizontal cntlin. Points Hoizontal cntlin b 146

149 n n St th stabiliz in th hoop and adjust th fabic position to match th cntlins fo th scond pattn and tmplat. Attach th hoop to th caiag and pss th stat/ stop button. Th coss maks ill b sn fo th fist pattn. Adjust th hoop position ith th jog kys o Fin position/angl adjustmnt ky if ncssay (f to pag 126). Pss th stat/stop button to s th st of pattns. m m Rmov th stabiliz fom th hoop. Tim aay th at solubl stabiliz suounding th dsign pattn ith scissos. Rmov th at solubl stabiliz by soaking th dsign in a bol of am at to complt th dsign. 147

150 200 mm o lss 200 mm o id F Am Emboidy Th f am hoop FA10a is spcially dsignd fo mboiding tubula gamnts such as slvs, pant lgs tc. Chck th opning siz of th tubula potion of th gamnt. Th opning idth must b 200 mm (8 ) o id. Th aa to b mboidd should b ithin 200 mm (8 ) fom th opning. Opning idth: If th opning idth is mm th mboidy aa should b limitd in od to pvnt fabic fom staining hoop movmnt. Pss th opning idth ky and slct th opning idth by pssing + o ky. Pss th OK ky and th aa limits ill b indicatd. Opning idth ky F am mboidy Da cntlins on th fabic ith tailo s chalk. Opn th diting indo and slct th hoop FA10a. Slct small dsigns hich can b opnd. Pss th OK ky to opn th ady to s indo. Rmov th xtnsion tabl. St th gamnt in th hoop FA10a as shon. Position th gamnt so that th cntlins match thos on th tmplat in th hoop. Plac th gamnt ov th f am of th machin and attach th hoop FA10a to th caiag. Roll up th cuff so that it ill not jam at th nck of th f am. Inst th blocking plat into th inn hoop to pvnt th cuff fom ovlapping th mboidy aa. Blocking plat Pss th stat/stop button to s making su that th gamnt can mov fly aound th f am. Rmov th hoop fom th caiag hn sing is finishd. Rmov th gamnt fom th f am. 148

151 Couching Dsigns Enjoy mbllishing you ok ith yans. Us th couching foot PC-1 o PC-2 fo th couching dsigns. Fo ight 3 yan (light), us th couching foot PC-1. Fo ight 4 yan (mdium) us th couching foot PC-2. Us th ight 3 yan (light) o ight 4 yan (mdium) fo th couching dsign pojct. Do not s on a had sting. Tst s to chck th sing sults. Do not us th singl colo sing ky fo th couching dsigns. Us th sam colo thad fo th bobbin and th ndl thad as th yans fo th bst sult. Slct on of th couching dsign. In th ady to s indo, pss th mboidy foot ky. Slct th couching foot PC-1 fo th ight 3 yan (light). Slct th couching foot PC-2 fo th ight 4 yan (mdium). Th pss foot hight and sing spd ill b automatically adjustd to suit th slctd couching dsign sing. If th yan lays bcom too thick, pss th adjust ky and adjust th pss foot manually (f to pag 127). CAUTION: Pss th lockout ky to lock th machin hn attaching/moving th pss foot, yan guid, and thading th thads and yans to th machin. Ppaation Attach th slctd couching foot to th machin. To attach th couching foot, f to pag 23. Tun th handhl toad you. B su that th ndl though th cnt of th couching foot. Hold th thad ith both of you hands. Slid th thad und th plat, and slip it into th pss foot hol. Plat Pss foot hol 149

152 y t u Rtightn th ndl clamp sc fimly ith th scdiv. Slid th yan guid t onto th ndl clamp sc y fimly ith th mouths u of th yan guids up as shon. t Yan guid y Ndl clamp sc u Mouths y B caful not to tun th ndl clamp sc hn sliding th yan guid onto th ndl clamp sc. Inst th yan guid ba i into th hol fo th additional spool pin o. Tun th yan guid to th ight until it stops. i Yan guid ba o Hol fo th additional spool pin o i Pass th yan though th yan guid ba. Thad th yan by passing it though th slit on th mouth. Thad th yan though th lft mouth fo th couching foot PC-1!0. Thad th yan though th ight mouth fo th couching foot PC-2!1.!0 Mouth fo couching foot PC-1!1 Mouth fo couching foot PC-2!2 Unind th ball of yan!2 and splay out th yan on a sing tabl to nsu smooth fding ithout tangling.!1!0 Hold th yan ith both of you hands. Slid th yan und th plat, and slip it into th pss foot hol. Da th yan and ndl thad to th a. Plat Foot hol 150

153 To s: Th knots may appa at som points of a ball of yan. B caful not to fd th knot of yan into th mouth of th yan guid hil sing. St th fabic to th hoop. Attach th hoop to th caiag. Pss th stat/stop button and s 5 to 6 stitchs. Pss th stat/stop button again to stop th machin.!4 Cut th loos yan!3 and thad!4 to th bginning of th stating point. Pss th stat/stop button to stat sing again.!3 Loos yan!4 Loos thad Th machin ill stop (and tim th thads if th auto thad cutting is activatd) automatically hn th fist colo sction is finishd.!3 Chang th thad to th nxt colo and yan. S th nxt sction. Rmov th couching foot hn finishd couching dsign. Th ndl may stik th couching foot hn sitching th odinay sing mod. Whn you combin couching dsigns, it is ncssay to stop th machin and tim th xcss yan aft th yan jumps to th nxt couching dsign. 151

154 CUSTOMIZING EMBROIDERY MODE SETTINGS Emboidy Mod Sttings Pss th mboidy stting mod ky (f to pag 94). Auto thad tnsion Th auto thad tnsion lvl can b adjustd ith th + o ky. Incas th valu hn using th sam thads on th bobbin and ndl. Lo bobbin thad aning Th lo bobbin thad aning lvl can b adjustd ith th + o ky. To tun this option off, pss th ky until OFF shos in th indo. Emboidy foot hight Th machin masus fabic thicknss and automatically sts th pss foot to th optimum hight. Hov, you can fin tun th foot hight accoding to fabic matial and/o oth sing conditions by pssing th + o ky. Th adjustabl ang is 0 mm to 4 mm. You can slct th typ of mboidy foot to st th mboidy foot hight fom P, PC-1 o PC-2 by pssing th cosponding ky. Pss th nxt pag ky to go to th nxt mnu. t y Maximum mboidy spd Th maximum mboidy sing spd can b st fom 400 to 800 spm in 100 spm intvals by pssing th + o ky. (Sing spd can b vaid ith th spd contol slid vn hil unning th machin.) Rduc th sing spd hn sing pattns ith nao zigzag stitchs that tnd to ap at high spds. t On stitch stop on/off Whn this function is tund on, th machin ss on stitch and stops automatically so that you can bing th bobbin thad up bfo sing. y Conscutiv colo gouping on/off If an impotd stitch data fil o dsign fils of a pattn combination contain conscutiv sctions in th sam colo, ths sctions a automatically goupd togth as on sction hn opning th fil o saving th pattn combination as a fil o going to th ady to s indo. This function is invalid hn combining th builtin dsigns and xtnally soucd dsigns. Tun this option off if you do not ish to goup th sctions togth. Pss th nxt pag ky to go to th nxt mnu. 152

155 u Hoop confimation on/off Th hoop confimation mssag ill appa vy tim bfo opning th ady to s indo. Hov you can tun this option off by slcting off. u i Hoop calibation You can calibat th cnt position of th hoops. You nd to nt mboidy mod bfo opning th mboidy stting indo. Extnd th caiag am and pss th YES ky. i-1 YES ky i i-1 Th caiag movs to th cnt position. Pss th hoop slction ky to opn th hoop slction indo. i-2 Hoop slction ky Slct th hoop and attach it to th caiag. St th tmplat in th hoop. Adjust th hoop position by pssing th jog kys so that th ndl is ight abov th hol in th tmplat and pss th OK ky. Pss th nxt pag ky to go to th nxt mnu. i-2 153

156 o Thad cutting Th a 3 thad cutting options fo mboidy. o Jump thad cutting lngth Whn this option is tund on, th machin tims th jump thads if th jump thad lngth is th sam o mo than th st valu. Jump thad cutting lngth can b st fom 3 mm to 30 mm o off.!0 Cut at colo chang/nd Whn this option is tund on, th machin tim th thad hn it stops to chang th thad to th nxt colo.!1 Cutting command Whn this option is tund on, th machin tim th thads at th tim cod if th impotd stitch data fil contains a tim command (cutting command).!0!1!2!3!2 Easy stting Whn this stting is tund on, th machin ill tim th thads if th jump thad is 3 mm o long, o hn th machin stops to chang th thad to th nxt colo. Pss th OK ky to confim th asy stting.!3 Advancd stting Whn this stting is tund on, you can configu th Jump thad cutting o, Cut at colo chang/nd!0, and Cutting Command!1 options individually. Pss th nxt pag ky to go to th nxt mnu. 154

157 You do not nd to chang Locking stitch function sttings hn using built-in mboidy dsigns.!4 Locking stitch ON/OFF (aft ach colo chang) Th thads may avl if th stitch data dos not contain locking stitchs at th bginning of ach colo sction. To avoid avling, inst locking stitchs at th bginning hn this function is tund ON.!4!5!5 Locking stitch ON/OFF (aft thad timming) If you tun ON th thad cutting (f to th pvious pag Thad cutting ), th machin ill inst locking stitchs aft th jump to avoid thads fom avling. Pss th nxt pag ky to go to th nxt mnu.!6-1!6 Thad slction Th a 9 typs of mboidy thad to choos fom. Pss th ky of th thad you ish to us. Th colo cod of th slctd band is shon on th colo/pat ky along ith th nam of th colo. If you us impotd mboidy stitch data containing pop thad infomation, pss th tain oiginal colo ky to tain this infomation.!6-1 Rtain oiginal colo ky Pss th nxt pag ky to go to th nxt mnu.!6 155

158 !7 Gid lin on/off Tun this option on to sho gid in th diting indo. Th gid siz can b altd fom 10 to 30 mm ith th + o ky hn this option is on. Tun this option off to hid th gid.!7!8!8 Rsum mod Whn Rsum Mod is tund on, th last pattn sn bfo tuning th po off ill sum hn you tun th po on again. Whn you tun th po on, th confimation indo opns. Pss th OK ky to sum th last pattn. Whn th auto-off tim is tund on, th sum mod ill b automatically tund on and cannot b changd (f to pag 97). Aft customizing th sttings, pss th OK ky to nabl th n sttings. To xit th stting mod ithout changing th sttings, pss X ky. 156

159 Saving and Opning a Fil Alays back up you data to an xtnal dvic in cas a poblm occus. You can sav oiginal mboidy dsigns as fils in th built-in mmoy and/o USB flash div. Pss th sav fil ky and th sav fil indo ill opn. Sav fil ky A fold labld Embf is displayd on th scn. To slct a fold, pss th fold icon. Fil nams a assignd automatically in numical od stating fom M_ Pss th OK ky and th fil is savd in th slctd fold. To assign a paticula nam to th fil, pss th nam ky. Rnam ky Th kyboad indo opns. Ent a n nam and pss th OK ky. Th fil is savd und th n nam. Whn you attmpt to sav a fil ith a nam that alady xists, th confimation mssag ill appa. Pss th OK ky to ovit th xisting fil o pss th X ky if you do not ant to ovit it. Cating a n fold Pss th n fold ky and th kyboad indo ill opn. N fold ky Ent a fold nam and pss th OK ky. A n fold is catd und th assignd nam. 157

160 Dlting a fil o fold Pss th dlt ky and slct th fil o fold to dlt. A confimation mssag appas. Pss th OK ky to dlt th fil o fold. Dlt ky Opning a fil To opn savd fils, pss th opn fil ky to opn th opn fil indo. Opn fil ky Slct th fold location, ith th built-in mmoy o USB flash div. Opn th fold that contains th dsid fil by pssing th fold icon. Th fil list of th slctd fold is displayd. Th dfault vi is small icon vi. In this vi, many fils can b displayd at onc, and fil attibuts a not shon on th icons. To opn th fil, pss th fil icon. Th fil attibuts can b shon on th fil icon. To sho th fil attibut, pss th lag icon ky o fil list ky. Small icon ky Lag icon ky Fil list ky Th a 8 fil attibuts as follos: : *.JEF (Janom mboidy fomat) : *.JEF+ (ditabl Janom mboidy fomat) : *.JPX (ditabl Janom mboidy fomat) : *.JPX (*.JEF+ ith a backgound bitmap imag) : *.JPX (Acufil mboidy fomat) : *.JPX (Cutok mboidy fomat) : *.JPX (F-am mboidy fomat) :*.DST (Tajima mboidy fomat) To hid fil attibut, pss th small icon ky. Tajima (*.DST) fomat dos not hav thad colo infomation. Janom s thad colo ill b assignd automatically hn opning. 158

161 Changing a nam of th fil o fold Pss th nam ky and slct th fil o fold fo hich you ish to chang th nam. Th kyboad indo ill opn. Ent a n nam and pss th OK ky. Th nam of th fil o fold ill chang. Rnam ky If you nt a nam that alady xists, th mssag Th sam nam xists. ill appa. Pss th X ky and nt anoth nam. Dict PC-Link You can connct you sing machin to a PC ith th USB cabl includd in th standad accssois. You nd to install EmboidyEdito and th USB div fo you sing machin on you comput. Emboidy Edito and th USB div a availabl in th Acutools S CD-ROM includd in th standad accssois. Stat up you sing machin and PC, and inst th typ A USB conncto into th PC. Inst th typ B conncto into you sing machin. You can snd oiginal stitch pattns catd ith Stitch Compos and oiginal mboidy dsign data fom a PC to you sing machin. Rf to on-scn hlp of EmboidyEdito fo mo dtails. CAUTION: Do not tun th po off o disconnct th USB cabl hil th data tansf is in pogss, as this ill caus loss of data and can damag th machin s mmoy. 159

162 CARE AND MAINTENANCE Claning th Hook Aa Clan th hook aa at last onc a month. Rmov th ndl plat (f to pag 24). Tun th po sitch off and unplug th machin. Rmov th ndl and pss foot. CAUTION: Do not dismantl th machin in any ay oth than as xplaind in this sction. Tak out th bobbin and bobbin hold. Bobbin hold Clan th bobbin hold ith a lint bush. Apply a f dops of th bobbin hold clan (includd in th standad accssois) to a soft cloth and ip th bobbin hold both insid and outsid. Lint bush Bobbin hold clan Soft cloth y t Clan th fd dog and auto thad cutt dvic ith th lint bush. t Fd dog y Auto thad cutt dvic Clan th insid and lip of th hook ac ith a soft cloth. u Inst th bobbin hold so that th knob fits nxt to th stopp in th hook ac. Inst th bobbin. u Knob i Stopp i Attach th ndl plat, pss foot and ndl. 160

163 Poblms and Waning Signals If th visual touch scn shos a aning sign, follo th guidanc blo. Waning Sign Caus Ty this Th stat/stop button is pssd ith th foot contol Disconnct th foot contol. connctd. Th foot contol is out of od. Contact th svic cnt o th sto fom hom th machin as puchasd. Th bobbin ind spindl is shiftd to th ight. Shift th bobbin ind spindl to th lft fo stitching. Th machin ill stop if th buttonhol is sn ithout loing th buttonhol lv. Lo th buttonhol lv and stat th machin again. Th tin ndl ky is pssd hn th tin ndl sign is indicatd on th LCD scn. Rplac th tin ndl ith a singl ndl and pss th OK ky. Th machin is statd ithout loing th fd dog ith button sing slctd. Th machin is statd ith th fd dog lod. Lo th fd dog. Rais th fd dog unlss you ant to s ith th fd dog lod. Th ndl plat is movd. Attach th ndl plat. Chck if th ndl platd is attachd poply. Th machin is halting du to ovload. Th machin is malfunctioning. Wait fo at last 15 sconds to stat. Rmov tangld thads aound tak-up lv, hook ac and automatic thad cutting mchanism. Contact th svic cnt o th sto fom hom th machin as puchasd. 161

164 Toublshooting Condition Caus Rfnc Th machin is noisy. Th ndl thad baks. Th bobbin thad baks. Th ndl baks. Visual Touch Scn is not cla. Skippd stitchs Sam pucking Slipping lays Th cloth is not fding smoothly. Th machin dos not un. 1. Thad is jammd in th hook aa. 2. Th fd dog is packd ith lint. 1. Th ndl thad is not thadd poply. 2. Th ndl thad tnsion is too tight. 3. Th ndl is bnt o blunt. 4. Th ndl is instd incoctly. 5. Th thad is too havy fo th ndl. 6. Th ndl thad as not st in th thad hold hn mboidy sing statd. 1. Th bobbin thad is not thadd poply in th bobbin hold. 2. Lint has collctd in th bobbin hold. 3. Th bobbin is damagd and dos not tun smoothly. 1. Th ndl is instd incoctly. 2. Th ndl is bnt o blunt. 3. Th ndl clamp sc is loos. 4. Th ndl thad tnsion is too tight. 5. Th ndl is too fin fo th fabic bing sn. 6. An inappopiat pss foot fo th slctd pattn is bing usd. 7. Th fabic as pulld toad you hn sing f motion uilting ith th f motion uilting opn-to foot QO. S pag 160. S pag 160. S pag 16. S pag 37. S pag 19. S pag 19. S pag 19. S pag 115. S pag 15. S pag 160. Rplac th bobbin. S pag 19. S pag 19. S pag 19. S pag 37. S pag 19. Us th coct foot. S pag Th contast of th scn is not adjustd poply. S pag Th ndl is instd incoctly. 2. Th ndl is bnt o blunt. 3. Th ndl and/o thads a not suitabl fo th fabic bing sn. 4. A blu ndl is not bing usd fo sing sttch, vy fin o synthtics. 5. Th ndl thad is not thadd poply. 6. Th ndl is dfctiv (ustd, bu on ndl y o tip). 7. Th mboidy hoop is not st poply. 8. Th fabic is not sttchd tightly nough on th mboidy hoop. 9. A pupl ndl is not bing usd fo sing thick fabics, dnims and acoss th hm. 1. Th ndl tnsion is too tight. 2. Th ndl thad o th bobbin thad is not thadd coctly. 3. Th ndl is too havy fo th fabic bing sn. 4. Th stitch lngth is too long fo th fabic. 5. Th stitch idth is too id. 6. Th stabiliz is not bing usd. 1. Th dual fd foot is not bing usd fo sing had to fd matial. 1. Th fd dog is packd ith lint. 2. Th dual fd foot is not bing usd fo sing had to fd matial. 3. Th stitchs a too fin. 4. Th fd dog is lod. 1. Th machin is not pluggd in. 2. A thad is caught in th hook ac. 3. A faulty foot contol is pluggd in hil th machin is tund on. 4. Th stat/stop button is usd fo odinay sing ith th foot contol pluggd in. S pag 19. S pag 19. S pag 19. S pag 19. S pag 16. Chang th ndl. S pag 115. S pag 114. S pag 19. S pag 37. S pags S pag 19. Mak stitchs shot. Rduc th stitch idth. Us th stabiliz. Us th dual fd foot. S pag 160. Us th dual fd foot. Mak stitchs long. S pag 26. S pag 9. S pag 160. Rplac th foot contol. S pag

165 Condition Caus Rfnc Cunching sound 1. Somthing is caught btn th caiag and th am. occus hn unning 2. Th caiag is hitting somthing aound th machin. th machin. Pattns a distotd. Th automatic buttonhol stitchs a not balancd. Pattn slction kys do not ok. Th machin cannot connct to th ilss LAN accss point. Th machin s Wi- Fi connction is unstabl. Th visual touch scn slls. USB flash div dos not function. 1. Th ndl thad tnsion is too loos. 2. Th stitch lngth is not suitabl fo th fabic bing sn. 3. Fd balancing dial is not poply st. 4. Intfacing is not usd fo sing sttch and vy fin fabics. 5. Th mboidy hoop attaching knob is loos. 6. Th mboidy hoop is hitting somthing aound th machin. 7. Th fabic is not sttchd tightly nough on th mboidy hoop. 8. Th fabic is caught o tappd hn sing mboidy. 9. Th mboidy foot is tappd by a jump thad. 10. Th mboidy foot stumbls on a mound of mboidy thads. 1. Th stitch lngth is not suitabl fo th fabic bing sn. 2. Th fd balancing dial is not st poply. 3. Intfacing is not bing usd ith sttch fabic. 4. Buttonhol lv is not lod. It is not abnomal fo a faint humming sound to b had fom th intnal motos. Th LCD scn and function ky aa may bcom am aft sval hous of continuous us. Rmov th objct. S pag 106. S pag 37. S pag 36. S pag 105. Us an intfacing. S pag 115. S pag 106. S pag 114. Stop th machin and f th fabic. Tim th jump thad. Adjust th foot hight (s pag 152). S pag 46. S pag 105. Us an intfacing. S pag Th ky position is out of alignmnt. S pag Th ilss out dvic dos not comply ith IEEE802.11b/g/n S pag 102. ilss standad. 2. Th ilss out dvic using WEP scuity, and ncyption typ S pag 102. o/and ky indx is not st coctly. 1. Th ilss out dvic s DHCP option is not tund on. S pag A micoav ovn, blutooth dvics o codlss phons is bing usd S pag 102. btn th machin and th accss point. 1. Th machin has xposd to high humidity and high tmpatu. Us and sto th machin in a cool and dy aa. 1. Th mmoy bank of th USB flash div is damagd. 2. Th USB flash div is not compatibl ith th machin. S pag 95. Chang th USB flash div. IMPORTANT: To cay th sing machin, hold th caying handl ith you hand, and suppot th sing machin ith th oth hand. Clan th outsid of th machin ith a soft cloth. Do not us chmical solvnts. Sto th machin in cool and dy plac. Do not sto th machin in an aa of high humidity, na a adiato o in dict sunlight. Mak su to sto th mboidy caiag am bfo tuning off th po sitch. 163

166 Utility (U) STITCH CHART Odinay Sing Buttonhol (B) Appliu (A) Hiloom (H) Quilt (Q) Satin (S) Bidg (BR) * Stitch pattns in blu can b usd ith th staight stitch ndl plat. * Stitch pattns in pupl can b tapd. * Stitch pattns shadd in light gy can b flippd vtically (Hoizontal mio imag). 164

167 Dcoativ (D) STITCH CHART Odinay Sing Long (L) Pictogaph (P) Play (PL) * Stitch pattns in pupl can b tapd. * Stitch pattns shadd in light gy can b flippd vtically (Hoizontal mio imag). 165

168 STITCH CHART Odinay Sing Block Scipt Boaday Block (9 mm) 166

169 STITCH CHART Odinay Sing Cyillic Mincho (9mm) Maumoji (9mm) Symbol 167

170 DESIGN CHART Pattn imags a not to scal. Emboidy Anna Maia Hon Dsigns (SQ14a) (RE20a) (FA10a) Flouish Alphabt (SQ14a) 168

171 DESIGN CHART Pattn imags a not to scal. Emboidy Coss Stitch Dsigns (SQ14a) (FA10a) Emboidy Lac Dsigns Dsigns fo at solubl stabiliz (SQ14a) (RE20a) (FA10a) Dsigns fo fabic (SQ14a) (RE20a) (FA10a) 169

172 Couching Dsigns DESIGN CHART Emboidy Pattn imags a not to scal. (SQ14a) (RE20a) Dcoativ Dsigns (SQ14a) (RE20a) (FA10a) 170

173 DESIGN CHART Pattn imags a not to scal. Emboidy Favoit Dsigns (SQ14a) (RE20a) (FA10a) Combination Dsigns (SQ14a) (RE20a) 171

174 DESIGN CHART Pattn imags a not to scal. Emboidy HANA Styl Chaacts Dsigns (SQ14a) Quilting Dsigns (SQ14a) (RE20a) Sashiko Dsigns (SQ14a) (RE20a) 172

175 KANJI Dsigns DESIGN CHART Emboidy Pattn imags a not to scal. (SQ14a) (RE20a) Calibation Pattn (SQ14a) 173