c Dr. Md. Zahurul Haq (BUET) Entropy ME 203 (2017) 2 / 27 T037
|
|
- Caitlin Hood
- 6 years ago
- Views:
Transcription
1 onsequences of Second Law of hermodynamics Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & echnology BUE Dhaka-000, Bangladesh ME 03: Engineering hermodynamics If a system is taken through a cycle and produces work, it must be exchanging heat with at least two reservoirs at different temperatures. If a system is taken through a cycle while exchanging heat with a single reservoir, work must be zero or negative. Heat can never be converted continuously and completely into work, but work can always be converted continuously and completely into heat. Work is a more valuable form of energy than heat. For a cycle and single reservoir, W net 0. lausius Inequity Example: lausius Inequality: Steam Power Plant: c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7 lausius Inequality δq 0 4 δw net δw rev +δw sys = δq R du δq R δq = R δq δw net = R du W net = δq R = δq 0 as W net 0 { δq = 0 reversible process < 0 irreversible process 037 At 0.7 MPa sat = H = o At 5 kpa sat = L = o Q H = Q = h h =.066 MJ/kg Q L = Q 34 = h 4 h 3 =.898 MJ/kg δq = QH H + QL L =.086 kj/kg c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7
2 S: A hermodynamic Property 038 For reversible process: δq = 0 = = : + A + A = = 0 B = 0 B = Since / is same for all reversible processes/paths between state &, this quantity is independent of path and is a function of end states only. his property is called, S. ds rev = s = s s = rev = ds rev is a property, hence change in entropy between two end states is same for all processes, both reversible and irreversible. If no irreversibilities occur within the system boundaries of the system during the process, the system is internally reversible. 87 For an internally reversible process, the change in the entropy is due solely for heat transfer. So, heat transfer across a boundary associated with it the transfer of entropy as well. transfer or flux rev c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7 Example: Steam generation in Boiler. [Moran Ex. 6.]: Internally reversible heating in a piston-cylinder assembly. s s = rev = sat s s = q sat = h h sat = hfg sat h fg = s fg sat q 3 = 3 = 3 ds 5 q = sat s s = area b a q 3 = 3 ds = area 3 c b q net = q + q 3 = area 3 c a 69 w = g f Pdv = Pv g v f = = 70 kj/kg q = g f ds = s g s f = s fg = = 56.8 kj/kg Also note that, h fg = 57 kj/kg c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7
3 arnot ycle H 3 = ds 53 - : Isentropic compression. -3 : Isothermal heat addition and expansion. 3-4 : Isentropic expansion. 4- : Isothermal heat rejection and compression. c Dr. Md. Zahurul Haq BUE ME / 7 56 L 54 q 3 = 3 ds = 3 H ds = Hs 3 s = H s q 4 = 4 ds = L 4 ds = Ls s 4 = L s w net = q net = q 3 + q 4 = H L s q in = q 3 η arnot wnet q in = H L s H s s = L H c Dr. Md. Zahurul Haq BUE ME / 7 4 s hange for Irreversible M Process 04 For reversible process: = 0 = A + B = 0 For irreversible process: < 0 = + < 0 B : > A Since path A is reversible, and since entropy is a property A = ds A = ds = ds > Since path is arbitrary, for irreversible process ds > = s s > irrev 70 For irreversible process: w Pdv : q ds So, the area underneath the path does not represent work and heat on the P v and s diagrams, respectively. In irreversible processes, the exact states through which a system undergoes are not defined. So, irreversible processes are shown as dashed lines and reversible processes as solid lines. c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7
4 Generation [Moran Ex. 6.]: Irreversible process of water. ds δq = δσ ds δq 0 σ produced generated by internal irreversibilities. 73 > 0 irreversible process σ : = 0 internally reversible process < 0 impossible process he entropy of a system can increase in only two ways, either by heat addition or by the presence of irreversibility. he entropy of a system can decrease only by heat removal. Reversible process: ds = / & adiabatic process: = 0 s = constant: for reversible adiabatic process. All isentropic processes are not necessarily reversible and adiabatic. can remain constant during a process if the heat removal balances the irreversibility. c Dr. Md. Zahurul Haq BUE ME / 7 7 du + dke + dpe = δw du = δw W m = g f du = u g u f = kj/kg Note that, the work input by stirring is greater in magnitude than the work done by the water as it expands 70 kj/kg. δσ/m = ds = ds 0 = ds σ m = s g s f = kj/kg.k c Dr. Md. Zahurul Haq BUE ME / 7 Principle of Increase of 7 Adiabatic or isolated system ontrol Mass, temperature = Surroundings, temperature = o δw ds For control mass: ds M. For the surroundings at o, < 0, and reversible heat transfer: ds surr = o. [ ds net = ds sys + ds surr o] If > o < 0 ds net 0 If < o > 0 ds net 0 ds net 0 change for an isolated system cannot be negative. 88 change of an isolated system is the sum of the entropy changes of its components, and is never less than zero. 89 A system and its surroundings form an isolated system. ds isolated 0 c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7
5 of a Pure Substance of a Pure Substance Example: Suppose that kg of saturated water vapor at 00 o is to a saturated liquid at 00 o in a constant-pressure process by heat transfer to the surrounding air, which is at 5 o. What is the net increase in entropy of the water plus surroundings? s net = s sys + s surr s sys = s fg = kj/kg.k s surr = q o = hfg o = = kj/kg.k s net =.533 kj/kg.k So, increase in net entropy. 50 emperature-entropy diagram for steam. of a Pure Substance of a Pure Substance c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7 of Ideal Gas 5 Enthalpy-entropy diagram Mollier diagram for steam. First Law: δw = du Reversible process: δw = Pdv : = ds Ideal gas: Pv = R : du = c v d : dh = c P d du = Pdv + ds ds = du + Pdv : st ds Equation. d ds = c V + P dv = c V d + R dv v : For ideal gas. = s,v s,v = d c V + R ln v v = s s = c V ln +R ln v v : Ideal gas with c V = constant. h = u + Pv dh = du + Pdv + vdp = rev + vdp = ds + vdp dh = ds + vdp ds = dh vdp : nd ds Equation. = s,p s,p = d c P R ln P P = s s = c P ln R ln P P : Ideal gas with c P = constant. c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7
6 of a Pure Substance of a Pure Substance Isentropic Process: s = constant s = 0 v v s s = c P ln +R ln k ln = R c V ln v v = k ln v v = ln v v [engel Ex. 7.]: Air is compressed in a car engine from o and 95 kpa in a reversible and adiabatic manner. If the compression ratio, r c = V /V of this engine is 8, determine the final temperature of the air. = = v k v ideal gas,s = s,constant k s s = c P ln R ln P P k ln = R c P ln P P = k k ln P P = ln P k P = k = P k P ideal gas,s = s,constant k = Pv k = constant ideal gas,s = s,constant k 90 = v v k k v = = = K v c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7 of a Pure Substance Example: Determine the change in specific entropy, in KJ/kg-K, of air as an ideal gas undergoing a process from 300 K, bar to 400 K, 5 bar. Because of the relatively small temperature range, we assume a constant value of c P =.008 KJ/kg-K. s = c P ln R ln P P =.008 kj ln kg.k = 0.79 kj/kg.k 400K 300K kj kg.k ln 5bar bar Note that, for isentropic compression, s = P /P k /k = 475 K. Hence, entropy change is - ve because of cooling of air from 475 K to 400 K. c Dr. Md. Zahurul Haq BUE ME / 7 of a Pure Substance Example: Air is contained in one half of an insulated tank. he other side is completely evacuated. he membrane is punctured and air quickly fills the entire volume. alculate the specific entropy change of the isolated system. 0 du = δw s s = c v ln +R ln v v w = 0,q = 0 du = 0 c V d = 0 =. v s s = c v ln +R ln v = 0+87 ln = kj/kg.k Note that: s s = kj/kg.k > = s > 0 }{{} 0 c Dr. Md. Zahurul Haq BUE ME / 7
7 Second-Law of hermodynamics for V Systems Second-Law of hermodynamics for V Systems Second Law Analysis for V System at t 30 M time t : region A + V S cm,t = S A + S cv,t at t+ t M t + t : V + region B S cm,t+ t = S B + S cv,t+ t 04 S cm,t+ t S cm,t t ds cm = Q i i + σ = S cv,t+ t S cv,t t + S B S A t : dscm = dscv + m B s B m A s A ds cv = Q i i + i ms i e ms e + σ cv 75 c Dr. Md. Zahurul Haq BUE ME / 7 c Dr. Md. Zahurul Haq BUE ME / 7 Second-Law of hermodynamics for V Systems ds cv = j Q j j + ms i ms e + σ cv For M systems: m i = 0, m e = 0 = dscm = j Q j j + σ For steady-state steady-flow SSSF process: ds dv / = 0. For -inlet & -outlet SSSF process: m i = m e. s e s i = j q j j + σcv m For adiabatic -inlet & -outlet SSSF process: s e s i = σcv m = s e s i c Dr. Md. Zahurul Haq BUE ME / 7
Consequences of Second Law of Thermodynamics. Entropy. Clausius Inequity
onsequences of Second Law of hermodynamics Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & echnology BUE Dhaka-000, Bangladesh zahurul@me.buet.ac.bd
More informationConsequences of Second Law of Thermodynamics. Entropy. Clausius Inequity
onsequences of Second Law of hermodynamics Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & echnology BUE Dhaka-000, Bangladesh zahurul@me.buet.ac.bd
More informationc Dr. Md. Zahurul Haq (BUET) Thermodynamic Processes & Efficiency ME 6101 (2017) 2 / 25 T145 = Q + W cv + i h 2 = h (V2 1 V 2 2)
Thermodynamic Processes & Isentropic Efficiency Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET Dhaka-1000, Bangladesh zahurul@me.buet.ac.bd
More informationChapter 7. Entropy. by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn
Chapter 7 Entropy by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics: An Engineering Approach, 5th ed.,
More informationChapter 7. Entropy: A Measure of Disorder
Chapter 7 Entropy: A Measure of Disorder Entropy and the Clausius Inequality The second law of thermodynamics leads to the definition of a new property called entropy, a quantitative measure of microscopic
More informationT098. c Dr. Md. Zahurul Haq (BUET) First Law of Thermodynamics ME 201 (2012) 2 / 26
Conservation of Energy for a Closed System Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET Dhaka-, Bangladesh zahurul@me.buet.ac.bd
More informationfirst law of ThermodyNamics
first law of ThermodyNamics First law of thermodynamics - Principle of conservation of energy - Energy can be neither created nor destroyed Basic statement When any closed system is taken through a cycle,
More informationThermodynamics II. Week 9
hermodynamics II Week 9 Example Oxygen gas in a piston cylinder at 300K, 00 kpa with volume o. m 3 is compressed in a reversible adiabatic process to a final temperature of 700K. Find the final pressure
More informationThe Second Law of Thermodynamics
he Second Law of hermodynamics So far We have studied the second law by looking at its results We don t have a thermodynamic property that can describe it In this chapter we will develop a mathematical
More information5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE
Chapter 6 Using Entropy 1 2 Chapter Objective Means are introduced for analyzing systems from the 2 nd law perspective as they undergo processes that are not necessarily cycles. Objective: introduce entropy
More informationEngineering Thermodynamics. Chapter 6. Entropy: a measure of Disorder 6.1 Introduction
Engineering hermodynamics AAi Chapter 6 Entropy: a measure of Disorder 6. Introduction he second law of thermodynamics leads to the definition of a new property called entropy, a quantitative measure of
More informationPrevious lecture. Today lecture
Previous lecture ds relations (derive from steady energy balance) Gibb s equations Entropy change in liquid and solid Equations of & v, & P, and P & for steady isentropic process of ideal gas Isentropic
More informationChapter 6. Using Entropy
Chapter 6 Using Entropy Learning Outcomes Demonstrate understanding of key concepts related to entropy and the second law... including entropy transfer, entropy production, and the increase in entropy
More informationEntropy and the Second Law of Thermodynamics
Entropy and the Second Law of Thermodynamics Reading Problems 7-1 7-3 7-88, 7-131, 7-135 7-6 7-10 8-24, 8-44, 8-46, 8-60, 8-73, 8-99, 8-128, 8-132, 8-1 8-10, 8-13 8-135, 8-148, 8-152, 8-166, 8-168, 8-189
More informationCHAPTER 8 ENTROPY. Blank
CHAPER 8 ENROPY Blank SONNAG/BORGNAKKE SUDY PROBLEM 8-8. A heat engine efficiency from the inequality of Clausius Consider an actual heat engine with efficiency of η working between reservoirs at and L.
More information+ m B1 = 1. u A1. u B1. - m B1 = V A. /v A = , u B1 + V B. = 5.5 kg => = V tot. Table B.1.
5.6 A rigid tank is divided into two rooms by a membrane, both containing water, shown in Fig. P5.6. Room A is at 200 kpa, v = 0.5 m3/kg, VA = m3, and room B contains 3.5 kg at 0.5 MPa, 400 C. The membrane
More informationAnswer Key THERMODYNAMICS TEST (a) 33. (d) 17. (c) 1. (a) 25. (a) 2. (b) 10. (d) 34. (b) 26. (c) 18. (d) 11. (c) 3. (d) 35. (c) 4. (d) 19.
HERMODYNAMICS ES Answer Key. (a) 9. (a) 7. (c) 5. (a). (d). (b) 0. (d) 8. (d) 6. (c) 4. (b). (d). (c) 9. (b) 7. (c) 5. (c) 4. (d). (a) 0. (b) 8. (b) 6. (b) 5. (b). (d). (a) 9. (a) 7. (b) 6. (a) 4. (d).
More informationChapter 5. The Second Law of Thermodynamics (continued)
hapter 5 he Second Law of hermodynamics (continued) Second Law of hermodynamics Alternative statements of the second law, lausius Statement of the Second Law It is impossible for any system to operate
More informationME Thermodynamics I
Homework - Week 01 HW-01 (25 points) Given: 5 Schematic of the solar cell/solar panel Find: 5 Identify the system and the heat/work interactions associated with it. Show the direction of the interactions.
More information(1)5. Which of the following equations is always valid for a fixed mass system undergoing an irreversible or reversible process:
Last Name First Name ME 300 Engineering Thermodynamics Exam #2 Spring 2008 March 28, 2008 Form A Note : (i) (ii) (iii) (iv) Closed book, closed notes; one 8.5 x 11 sheet allowed. 60 points total; 60 minutes;
More informationCHAPTER 7 ENTROPY. Copyright Hany A. Al-Ansary and S. I. Abdel-Khalik (2014) 1
CHAPTER 7 ENTROPY S. I. Abdel-Khalik (2014) 1 ENTROPY The Clausius Inequality The Clausius inequality states that for for all cycles, reversible or irreversible, engines or refrigerators: For internally-reversible
More informationLecture 29-30: Closed system entropy balance
ME 200 Thermodynamics I Spring 2016 Lecture 29-30: Closed system entropy balance Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 200240, P.
More informationIsentropic Efficiency in Engineering Thermodynamics
June 21, 2010 Isentropic Efficiency in Engineering Thermodynamics Introduction This article is a summary of selected parts of chapters 4, 5 and 6 in the textbook by Moran and Shapiro (2008. The intent
More informationEntropy and the Second Law of Thermodynamics
Entropy and the Second Law of hermodynamics Reading Problems 6-, 6-2, 6-7, 6-8, 6-6-8, 6-87, 7-7-0, 7-2, 7-3 7-39, 7-46, 7-6, 7-89, 7-, 7-22, 7-24, 7-30, 7-55, 7-58 Why do we need another law in thermodynamics?
More informationChapter 7: The Second Law of Thermodynamics
Chapter 7: he Second Law of hermodynamics he second law of thermodynamics asserts that processes occur in a certain direction and that the energy has quality as well as quantity he first law places no
More informationME 2322 Thermodynamics I PRE-LECTURE Lesson 23 Complete the items below Name:
Lesson 23 1. (10 pt) Write the equation for the thermal efficiency of a Carnot heat engine below: 1 L H 2. (10 pt) Can the thermal efficiency of an actual engine ever exceed that of an equivalent Carnot
More informationDishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points)
HW-1 (25 points) (a) Given: 1 for writing given, find, EFD, etc., Schematic of a household piping system Find: Identify system and location on the system boundary where the system interacts with the environment
More informationThis follows from the Clausius inequality as a consequence of the second law of thermodynamics. Therefore. (for reversible process only) (22.
Entropy Clausius inequality can be used to analyze the cyclic process in a quantitative manner. The second law became a law of wider applicability when Clausius introduced the property called entropy.
More informationMAE 110A. Homework 6: Solutions 11/9/2017
MAE 110A Hoework 6: Solutions 11/9/2017 H6.1: Two kg of H2O contained in a piston-cylinder assebly, initially at 1.0 bar and 140 C undergoes an internally ersible, isotheral copression to 25 bar. Given
More informationWeek 5. Energy Analysis of Closed Systems. GENESYS Laboratory
Week 5. Energy Analysis of Closed Systems Objectives 1. Examine the moving boundary work or PdV work commonly encountered in reciprocating devices such as automotive engines and compressors 2. Identify
More informationChapter 4. Energy Analysis of Closed Systems
Chapter 4 Energy Analysis of Closed Systems The first law of thermodynamics is an expression of the conservation of energy principle. Energy can cross the boundaries of a closed system in the form of heat
More informationI. (20%) Answer the following True (T) or False (F). If false, explain why for full credit.
I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit. Both the Kelvin and Fahrenheit scales are absolute temperature scales. Specific volume, v, is an intensive property,
More informationChapter 5: The First Law of Thermodynamics: Closed Systems
Chapter 5: The First Law of Thermodynamics: Closed Systems The first law of thermodynamics can be simply stated as follows: during an interaction between a system and its surroundings, the amount of energy
More informationTHERMODYNAMICS, FLUID AND PLANT PROCESSES. The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial.
THERMODYNAMICS, FLUID AND PLANT PROCESSES The tutorials are drawn from other subjects so the solutions are identified by the appropriate tutorial. THERMODYNAMICS TUTORIAL 2 THERMODYNAMIC PRINCIPLES SAE
More informationAvailability and Irreversibility
Availability and Irreversibility 1.0 Overview A critical application of thermodynamics is finding the maximum amount of work that can be extracted from a given energy resource. This calculation forms the
More informationExergy and the Dead State
EXERGY The energy content of the universe is constant, just as its mass content is. Yet at times of crisis we are bombarded with speeches and articles on how to conserve energy. As engineers, we know that
More informationLecture 44: Review Thermodynamics I
ME 00 Thermodynamics I Lecture 44: Review Thermodynamics I Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 0040, P. R. China Email : liyo@sjtu.edu.cn
More informationThermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA
Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA Dr. Walid A. Aissa Associate Professor, Mech. Engg. Dept. Faculty of Engineering
More informationThermodynamics is the Science of Energy and Entropy
Definition of Thermodynamics: Thermodynamics is the Science of Energy and Entropy - Some definitions. - The zeroth law. - Properties of pure substances. - Ideal gas law. - Entropy and the second law. Some
More informationContent. Entropy and principle of increasing entropy. Change of entropy in an ideal gas.
Entropy Content Entropy and principle of increasing entropy. Change of entropy in an ideal gas. Entropy Entropy can be viewed as a measure of molecular disorder, or molecular randomness. As a system becomes
More informationTHERMODYNAMICS Lecture 5: Second Law of Thermodynamics
HERMODYNAMICS Lecture 5: Second Law of hermodynamics Pierwsza strona Second Law of hermodynamics In the course of discussions on the First Law of hermodynamics we concluded that all kinds of energy are
More informationKing Fahd University of Petroleum & Minerals
King Fahd University of Petroleum & Minerals Mechanical Engineering Thermodynamics ME 04 BY Dr. Haitham Bahaidarah My Office Office Hours: :00 0:00 am SMW 03:00 04:00 pm UT Location: Building Room # 5.4
More informationME Thermodynamics I. Lecture Notes and Example Problems
ME 227.3 Thermodynamics I Lecture Notes and Example Problems James D. Bugg September 2018 Department of Mechanical Engineering Introduction Part I: Lecture Notes This part contains handout versions of
More informationIn the next lecture...
16 1 In the next lecture... Solve problems from Entropy Carnot cycle Exergy Second law efficiency 2 Problem 1 A heat engine receives reversibly 420 kj/cycle of heat from a source at 327 o C and rejects
More informationConservation of Energy for a Closed System. First Law of Thermodynamics. First Law of Thermodynamics for a Change in State
Conservation of Energy for a Closed System First Law of Thermodynamics Dr. Md. Zahurul Haq rofessor Department of Mechanical Engineering Bangladesh University of Engineering & Technology BUET Dhaka-000,
More informationDr Ali Jawarneh. Hashemite University
Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University Examine the moving boundary work or P d work commonly encountered in reciprocating devices such as automotive engines and compressors.
More information= for reversible < for irreversible
CHAPER 6 Entropy Copyright he McGraw-Hill Companies, Inc. Permission required for reproduction or display. he Clausius Inequality: δ 0 Cyclic integral his inequality is valid for all cycles, reversible
More informationTHERMODYNAMICS NOTES. These notes give a brief overview of engineering thermodynamics. They are based on the thermodynamics text by Black & Hartley.
THERMODYNAMICS NOTES These notes give a brief overview of engineering thermodynamics. They are based on the thermodynamics text by Black & Hartley. Topics covered include: concepts; properties; conservation
More informationToday lecture. 1. Entropy change in an isolated system 2. Exergy
Today lecture 1. Entropy change in an isolated system. Exergy - What is exergy? - Reversible Work & Irreversibility - Second-Law Efficiency - Exergy change of a system For a fixed mass For a flow stream
More informationKNOWN: Data are provided for a closed system undergoing a process involving work, heat transfer, change in elevation, and change in velocity.
Problem 44 A closed system of mass of 10 kg undergoes a process during which there is energy transfer by work from the system of 0147 kj per kg, an elevation decrease of 50 m, and an increase in velocity
More informationThe First Law of Thermodynamics. By: Yidnekachew Messele
The First Law of Thermodynamics By: Yidnekachew Messele It is the law that relates the various forms of energies for system of different types. It is simply the expression of the conservation of energy
More information1. (10) Calorically perfect ideal air at 300 K, 100 kpa, 1000 m/s, is brought to rest isentropically. Determine its final temperature.
AME 5053 Intermediate Thermodynamics Examination Prof J M Powers 30 September 0 0 Calorically perfect ideal air at 300 K, 00 kpa, 000 m/s, is brought to rest isentropically Determine its final temperature
More informationPROBLEM 6.3. Using the appropriate table, determine the indicated property. In each case, locate the state on sketches of the T-v and T-s diagrams.
PROBLEM 63 Using the appropriate table, determine the indicated property In each case, locate the state on sketches of the -v and -s diagrams (a) water at p = 040 bar, h = 147714 kj/kg K Find s, in kj/kg
More informationC v & Thermodynamics Relationships
Mathematical heorems hermodnamics Relations Dr. M. Zahurul Haq rofessor Department of Mechanical Engineering Bangladesh Uniersit of Engineering & echnolog BUE Dhaka-1000, Bangladesh ahurul@me.buet.ac.bd
More informationOutline. Property diagrams involving entropy. Heat transfer for internally reversible process
Outline roperty diagrams involving entropy What is entropy? T-ds relations Entropy change of substances ure substances (near wet dome) Solids and liquids Ideal gases roperty diagrams involving entropy
More informationTwo mark questions and answers UNIT II SECOND LAW 1. Define Clausius statement. It is impossible for a self-acting machine working in a cyclic process, to transfer heat from a body at lower temperature
More informationEVALUATING PROPERTIES FOR A PURE SUBSTANCES. By Ertanto Vetra
EVALUATING PROPERTIES FOR A PURE SUBSTANCES 1 By Ertanto Vetra Outlines - TV, PV, PT, PVT Diagram - Property Tables - Introduction to Enthalpy - Reference State & Reference Values - Ideal Gas Equation
More informationME 200 Final Exam December 14, :00 a.m. to 10:00 a.m.
CIRCLE YOUR LECTURE BELOW: First Name Last Name 7:30 a.m. 8:30 a.m. 10:30 a.m. 11:30 a.m. Boregowda Boregowda Braun Bae 2:30 p.m. 3:30 p.m. 4:30 p.m. Meyer Naik Hess ME 200 Final Exam December 14, 2015
More informationR13. II B. Tech I Semester Regular Examinations, Jan THERMODYNAMICS (Com. to ME, AE, AME) PART- A
SET - 1 II B. Tech I Semester Regular Examinations, Jan - 2015 THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max. Marks: 70 Note 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answer
More informationThe Laws of Thermodynamics
MME 231: Lecture 06 he Laws of hermodynamics he Second Law of hermodynamics. A. K. M. B. Rashid Professor, Department of MME BUE, Dhaka oday s opics Relation between entropy transfer and heat Entropy change
More informationECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 13 June 2007
ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER 13 June 2007 Midterm Examination R. Culham This is a 2 hour, open-book examination. You are permitted to use: course text book calculator There are
More informationMAE 110A. Homework 3: Solutions 10/20/2017
MAE 110A Homework 3: Solutions 10/20/2017 3.10: For H 2O, determine the specified property at the indicated state. Locate the state on a sketch of the T-v diagram. Given a) T 140 C, v 0.5 m 3 kg b) p 30MPa,
More informationSHRI RAMSWAROOP MEMORIAL COLLEGE OF ENGG. & MANAGEMENT
B.Tech. [SEM III (ME-31, 32, 33,34,35 & 36)] QUIZ TEST-1 Time: 1 Hour THERMODYNAMICS Max. Marks: 30 (EME-303) Note: Attempt All Questions. Q1) 2 kg of an ideal gas is compressed adiabatically from pressure
More information= for reversible < for irreversible
CAPER 6 Entropy Copyright he McGraw-ill Companies, Inc. Permission required for reproduction or display. he Clausius Inequality: 0 his inequality is valid for all cycles, reversible or irreversible Cycle
More informationCHAPTER 8 THERMODYNAMICS. Common Data For Q. 3 and Q.4. Steam enters an adiabatic turbine operating at steady state with an enthalpy of 3251.
CHAPER 8 HERMODYNAMICS YEAR 0 ONE MARK MCQ 8. MCQ 8. Steam enters an adiabatic turbine operating at steady state with an enthalpy of 35.0 kj/ kg and leaves as a saturated mixture at 5 kpa with quality
More informationPure Substance. Properties of Pure Substances & Equations of State. Vapour-Liquid-Solid Phase Equilibrium
Pure Substance Properties of Pure Substances & Equations of State Dr. d. Zahurul Haq Professor Department of echanical Engineering Bangladesh University of Engineering & Technology (BUET) Dhaka-1000, Bangladesh
More informationdu = δq + δw = δq rev + δw rev = δq rev + 0
Chem 4501 Introduction to hermodynamics, 3 Credits Kinetics, and Statistical Mechanics Module Number 6 Active Learning Answers and Optional Problems/Solutions 1. McQuarrie and Simon, 6-6. Paraphrase: Compute
More informationCHAPTER 2 ENERGY INTERACTION (HEAT AND WORK)
CHATER ENERGY INTERACTION (HEAT AND WORK) Energy can cross the boundary of a closed system in two ways: Heat and Work. WORK The work is done by a force as it acts upon a body moving in direction of force.
More informationUBMCC11 - THERMODYNAMICS. B.E (Marine Engineering) B 16 BASIC CONCEPTS AND FIRST LAW PART- A
UBMCC11 - THERMODYNAMICS B.E (Marine Engineering) B 16 UNIT I BASIC CONCEPTS AND FIRST LAW PART- A 1. What do you understand by pure substance? 2. Define thermodynamic system. 3. Name the different types
More information10. Heat devices: heat engines and refrigerators (Hiroshi Matsuoka)
10 Heat devices: heat engines and refrigerators (Hiroshi Matsuoka) 1 In this chapter we will discuss how heat devices work Heat devices convert heat into work or work into heat and include heat engines
More information20 m neon m propane. g 20. Problems with solutions:
Problems with solutions:. A -m tank is filled with a gas at room temperature 0 C and pressure 00 Kpa. How much mass is there if the gas is a) Air b) Neon, or c) Propane? Given: T7K; P00KPa; M air 9; M
More informationT104. c Dr. Md. Zahurul Haq (BUET) Second Law of Thermodynamics ME 201 (2015) 2 / 23 T136
Some Observations in Work & Heat Conversions & Second Law of Thermodynamics Dr. Md. Zahurul Haq Professor Department of Mechanical Engineering Bangladesh University of Engineering & Technology (BUET) Dhaka-1000,
More informationR13 SET - 1 '' ''' '' ' '''' Code No RT21033
SET - 1 II B. Tech I Semester Supplementary Examinations, June - 2015 THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max. Marks: 70 Note: 1. Question Paper consists of two parts (Part-A and Part-B)
More informationChapter 1: Basic Definitions, Terminologies and Concepts
Chapter : Basic Definitions, Terminologies and Concepts ---------------------------------------. UThermodynamics:U It is a basic science that deals with: -. Energy transformation from one form to another..
More informationMAE 11. Homework 8: Solutions 11/30/2018
MAE 11 Homework 8: Solutions 11/30/2018 MAE 11 Fall 2018 HW #8 Due: Friday, November 30 (beginning of class at 12:00p) Requirements:: Include T s diagram for all cycles. Also include p v diagrams for Ch
More informationAljalal-Phys March 2004-Ch21-page 1. Chapter 21. Entropy and the Second Law of Thermodynamics
Aljalal-Phys.102-27 March 2004-Ch21-page 1 Chapter 21 Entropy and the Second Law of hermodynamics Aljalal-Phys.102-27 March 2004-Ch21-page 2 21-1 Some One-Way Processes Egg Ok Irreversible process Egg
More information1. (10) True or False: A material with an ideal thermal equation of state must have a constant c v.
AME 54531 Intermediate hermodynamics Examination : Prof. J. M. Powers 7 November 018 1. 10) rue or False: A material with an ideal thermal equation of state must have a constant c v. False. Forsuchamaterialc
More informationThermodynamics I Chapter 2 Properties of Pure Substances
Thermodynamics I Chapter 2 Properties of Pure Substances Mohsin Mohd Sies Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia Properties of Pure Substances (Motivation) To quantify the changes
More informationSpring_#8. Thermodynamics. Youngsuk Nam
Spring_#8 Thermodynamics Youngsuk Nam ysnam1@khu.ac.krac kr Ch.7: Entropy Apply the second law of thermodynamics to processes. Define a new property called entropy to quantify the secondlaw effects. Establish
More informationWhere F1 is the force and dl1 is the infinitesimal displacement, but F1 = p1a1
In order to force the fluid to flow across the boundary of the system against a pressure p1, work is done on the boundary of the system. The amount of work done is dw = - F1.dl1, Where F1 is the force
More informationUnit Workbook 2 - Level 5 ENG U64 Thermofluids 2018 UniCourse Ltd. All Rights Reserved. Sample
Pearson BTEC Level 5 Higher Nationals in Engineering (RQF) Unit 64: Thermofluids Unit Workbook 2 in a series of 4 for this unit Learning Outcome 2 Vapour Power Cycles Page 1 of 26 2.1 Power Cycles Unit
More informationS.E. (Chemical Engineering) (Second Semester)EXAMINATION, 2012 THERMODYNAMICS-I (2008 PATTERN) Time : Three Hours Maximum Marks : 100
Total No. of Questions 12] [Total No. of Printed Pages 7 Seat No. [4162]-189 S.E. (Chemical Engineering) (Second Semester)EXAMINATION, 2012 THERMODYNAMICS-I (2008 PATTERN) Time : Three Hours Maximum Marks
More informationECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 20 June 2005
ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER 20 June 2005 Midterm Examination R. Culham & M. Bahrami This is a 90 minute, closed-book examination. You are permitted to use one 8.5 in. 11 in. crib
More informationExisting Resources: Supplemental/reference for students with thermodynamics background and interests:
Existing Resources: Masters, G. (1991) Introduction to Environmental Engineering and Science (Prentice Hall: NJ), pages 15 29. [ Masters_1991_Energy.pdf] Supplemental/reference for students with thermodynamics
More informationClassification following properties of the system in Intensive and Extensive
Unit I Classification following properties of the system in Intensive and Extensive Extensive : mass, weight, volume, potential energy, Kinetic energy, Internal energy, entropy, exergy, energy, magnetization
More informationLecture 35: Vapor power systems, Rankine cycle
ME 00 Thermodynamics I Spring 015 Lecture 35: Vapor power systems, Rankine cycle Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 0040, P. R.
More informationFundamentals of Thermodynamics. Chapter 8. Exergy
Fundamentals of Thermodynamics Chapter 8 Exergy Exergy Availability, available energy Anergy Unavailable energy Irreversible energy, reversible work, and irreversibility Exergy analysis : Pure Thermodynamics
More informationThe Kelvin-Planck statement of the second law
The Kelvin-Planck statement of the second law It is impossible for any device that operates on a cycle to receive heat from a single reservoir and produce a net amount of work Q W E =ΔE net net net, mass
More informationPure Substance. Properties of Pure Substances & Equations of State. Vapour-Liquid-Solid Phase Equilibrium
Pure Substance Properties of Pure Substances & Equations of State Dr. d. Zahurul Haq Professor Department of echanical Engineering Bangladesh University of Engineering & Technology (BUET) Dhaka-1000, Bangladesh
More informationMAE 320 HW 7B. 1e. For an isolated system, please circle the parameter which will change with time. (a) Total energy;
MAE 320 HW 7B his comprehensive homework is due Monday, December 5 th, 206. Each problem is worth the points indicated. Copying of the solution from another is not acceptable. Multi-choice, multi-answer
More informationAn introduction to thermodynamics applied to Organic Rankine Cycles
An introduction to thermodynamics applied to Organic Rankine Cycles By : Sylvain Quoilin PhD Student at the University of Liège November 2008 1 Definition of a few thermodynamic variables 1.1 Main thermodynamics
More informationUNIT I Basic concepts and Work & Heat Transfer
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Engineering Thermodynamics (16ME307) Year & Sem: II-B. Tech & II-Sem
More informationMME 2010 METALLURGICAL THERMODYNAMICS II. Fundamentals of Thermodynamics for Systems of Constant Composition
MME 2010 METALLURGICAL THERMODYNAMICS II Fundamentals of Thermodynamics for Systems of Constant Composition Thermodynamics addresses two types of problems: 1- Computation of energy difference between two
More informationChapter One Reviews of Thermodynamics Update on 2013/9/13
Chapter One Reviews of Thermodynamics Update on 2013/9/13 (1.1). Thermodynamic system An isolated system is a system that exchanges neither mass nor energy with its environment. An insulated rigid tank
More information7. Development of the 2nd Law
7-1 7. Development of the 2nd Law 7.1 1st Law Limitations The 1 st Law describes energy accounting. Once we have a process (or string of processes) we can calculate the relevant energy interactions. The
More informationEngineering Thermodynamics Solutions Manual
Engineering Thermodynamics Solutions Manual Prof. T.T. Al-Shemmeri Download free books at Prof. T.T. Al-Shemmeri Engineering Thermodynamics Solutions Manual 2 2012 Prof. T.T. Al-Shemmeri & bookboon.com
More informationFINAL EXAM. ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW:
ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW: Div. 5 7:30 am Div. 2 10:30 am Div. 4 12:30 am Prof. Naik Prof. Braun Prof. Bae Div. 3 2:30 pm Div. 1 4:30 pm Div. 6 4:30 pm Prof. Chen Prof.
More informationFirst Law of Thermodynamics Closed Systems
First Law of Thermodynamics Closed Systems Content The First Law of Thermodynamics Energy Balance Energy Change of a System Mechanisms of Energy Transfer First Law of Thermodynamics in Closed Systems Moving
More informationw = -nrt hot ln(v 2 /V 1 ) nrt cold ln(v 1 /V 2 )[sincev/v 4 3 = V 1 /V 2 ]
Chemistry 433 Lecture 9 Entropy and the Second Law NC State University Spontaneity of Chemical Reactions One might be tempted based on the results of thermochemistry to predict that all exothermic reactions
More informationFind: a) Mass of the air, in kg, b) final temperature of the air, in K, and c) amount of entropy produced, in kj/k.
PROBLEM 6.25 Three m 3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 295 K, 200 kpa. The air receives 1546 kj of work from the paddle wheel. Assuming the ideal gas model,
More information