Centralized Lubrication Type Cam Followers Easy Mounting Type Cam Followers Miniature Type Cam Followers Stainless Steel Made Miniature Cam Followers

Transcription

1 Standard Type am Followers Stainless Steel Made am Followers Solid Eccentric Type am Followers Eccentric Type am Followers Thrust Disk Type am Followers am Follower -Lube am Followers entralized Lubrication Type am Followers Easy Mountin Type am Followers Miniature Type am Followers Stainless Steel Made Miniature am Followers ylindrical Roller am Followers Structure and Features am Followers are bearins with a stud incorporatin needle rollers in a thick walled. These bearins are desined or rotation, and have superior rotational perormance with a small coeicient o riction and hih load capacity. As studs already have threads or steps, they are easy to mount. am Followers are ollower bearins or cam mechanisms and linear motions and have hih riidity and Structure o am Followers hih accuracy. They are, thereore, used widely or machine tools, industrial robots, electronic devices, and OA equipment. Stainless steel made am Followers are superior in corrosion resistance and suitable or applications in environments where oil cannot be used or water splashed, and in clean rooms. Standard Type am Follower( ) Thrust Disk Type am Follower( ) am Follower ( ) Seal ae Seal Thrust disk ae ae Side plate Side plate Side plate eedle roller Outer rin eedle roller Outer rin eedle roller Outer rin -Lube am Follower() Seal Thrust disk ae Miniature Type am Follower ae ylindrical Roller am Follower Shield plate Side plate eedle roller Outer rin Side plate eedle roller Outer rin Side plate ylindrical roller Outer rin ote n case o the stud diameter (d ) to, a lubrication ittin is provided in the stud head hex hole. The stud diameter (d ) to, a rease nipple is provided in the stud head hex hole. needed, contact. Thermosettin solid-type lubricant ills inner space o the bearin.

2 Types For am Followers, the types shown in Table are available. Table Type o am Followers Metric F series am Follower F -Lube am Followers FWS Miniature FS series FS W ylindrical Roller am Followers UF nch series Standard Type am Followers F Solid Eccentric Type am Followers FES Eccentric Type am Followers FE Thrust Disk Type am Followers F W entralized Lubrication Type am Followers F-RUF-FU Easy Mountin Type am Followers F-SFU Miniature Type am Followers FS Thrust Disk Type Miniature am Followers nch series am Followers R nch series Heavy Duty am Followers RH Type Hih carbon steel made Stainless steel made Hih carbon steel made Hih carbon steel made Hih carbon steel made Stainless steel made Hih carbon steel made Hih carbon steel made Hih carbon steel made Hih carbon steel made Hih carbon steel made Stainless steel made Hih carbon steel made Stainless steel made Hih carbon steel made Hih carbon steel made Hih carbon steel made With hexaon hole With hexaon hole With hexaon hole With hexaon hole With hexaon hole With hexaon hole With screwdriver slot With hexaon hole With hexaon hole With hexaon hole With hexaon hole With hexaon hole With hexaon hole With hexaon hole With screwdriver slot With hexaon hole With screwdriver slot With cae Full complement rowned ylindrical rowned ylindrical F R F UUR F F R F FUUR FES FES FE FE R UUR R UUR F W R F WUUR F FW R F FWUUR F-RU F W /S R R R UUR R R R UUR F F F F UU F FUU FES FES FE FE F-FU FS F-SFU F FS F FS UU UU W FS FW R R UU R R UU F R F UUR FE R FE UUR UF R R R R UUR R R R UUR RH R RH UUR RH R RH UUR F F UU FE FE UU FS FS F FS W R R R R RH RH RH RH UU UUR UU UU Standard Type am Followers These are the basic type bearins in am Follower series. Models with stud diameters ranin rom to are prepared, and are suitable or a wide rane o applications. Solid Eccentric Type am Followers The stud o these bearins is eccentric to the center axis o the. Thus, the position o the outer rin in the radial direction in relation to the matin cam uide surace can easily be adjusted by turnin the stud, and the load distribution on a number o cam ollower s used on the same cam uide surace can be made uniorm. These are eccentric cam ollowers with a one-piece stud that can be mounted in the same mountin holes as those or Standard Type am Followers. Eccentricity is... Eccentric Type am Followers n these bearins, an eccentric collar is assembled with the am Follower stud, enablin the to be positioned easily in the radial direction aainst the matin cam uide surace. Eccentricity is... Thrust Disk Type am Followers These bearins have special resin thrust disk washers superior in wear and heat resistance between the slidin contact area o shoulders, stud head and side plate. These disk washers reduce riction and wear due to axial loads caused by misalinment, etc. entralized Lubrication Type am Followers These bearins have one or two pipe-threaded holes in the stud. Thus, this series is suitable when centralized lubrication is required. Easy Mountin Type am Followers These bearins have a stepped tapered portion on the stud. When mountin the am Follower, it is easy to ix its location by tihtenin a set screw to the stepped portion. Thus, this type is suitable when a lare number o am Followers are used in a machine such as a pallet chaner. am Follower Takin over the basic perormance o Standard Type am Follower, this cam ollower realizes a reasonable price. As rease is pre-packed, the unit may be used riht ater unpackin. -Lube am Followers These bearins are lubricated with a newly developed thermosettin solid-type lubricant which ills the inner space o the bearin. This lubricant provides lonterm maintenance ree. Miniature Type am Followers These are compactly desined bearins, incorporatin very thin needle rollers in an with a small outside diameter. They are used in electronic devices, OA equipment, small index devices, etc. ylindrical Roller am Followers These bearins are ull complement type bearins incorporatin double rows o ull complement cylindrical rollers in the, and can withstand lare radial loads and some axial loads. nch series am Followers Two types, R and RH, are available in the nch series am Followers. lack oxide ilm treatment is made on RH models. Lubrication method o Hex Head am Followers TypesStandard Type, Solid Eccentric Type, Eccentric Type, Thrust Disk Type, Easy Mountin Type, ylindrical Roller Type. dia. Re-reasin ittin is incorporated in the stud head. Remark : All o Easy Mountin Type are way port. dia. rease nipple is incorporated in the stud head. =.k=.lbs. =.inch

3 nternal Structures and Shapes arious types are lined up in am Follower series, includin the caed type, ull complement type, shield type, sealed type, type with crowned, type with cylindrical, type with hexaonal hole, etc. dentiication number Some examples o the identiication number o am Followers are shown below. For applicable material symbol, roller uide method, seal structure and shape o outside surace, reer table o each series. Examples o identiication number Roller uide method am Followers include the caed type and the ull complement type. The caed type has a small coeicient o riction and is suitable or hih speed rotations, while the ull complement type is suitable or heavy loads at low speed rotations. With cae Full complement Example Example F F W UU R R Example F W UU R /S Example FS F P Seal structure am Followers include the shield type and the sealed type. n the shield type, the narrow clearances between the and the stud lane and between the and the side plate orm labyrinths. The sealed type incorporates seals in the narrow clearances to prevent the penetration o orein particles. Shape o outside surace The outside surace o the o am Followers, which makes direct contact with the matin cam uide surace, is either crowned or cylindrical. The crowned s are eective in moderatin the ede load due to mountin errors. The cylindrical s have a lare contact area with the matin cam uide surace, and are suitable or applications in which the applied load is lare or the cam uide surace hardness is low. rowned ylindrical R Model code F Standard Type am Follower FES Solid Eccentric Type am Follower FE Eccentric Type am Follower FW Thrust Disk Type am Follower F-RU entralized Lubrication Type am Follower ( ) F-FU entralized Lubrication Type am Follower ( ) F-SFU Easy Mountin Type am Follower F am Follower FW/S -Lube am Follower FS Miniature Type am Follower FSW Thrust Disk Type Miniature am Follower UF ylindrical Roller am Follower R nch series am Follower(With Hexaon socket) R nch series am Follower(With Screw driverslot) RH nch series am Follower(With Hexaon socket) RH nch series am Follower(With Screw driverslot) Size The value indicates a stud diameter. (unit: ) n the inch series, the outside diameter o the outerrin in units o / inch is indicated. Material o symbol F Hih carbon steel made Stainless steel made Roller uide method o symbol With cae type Full complement type Seal structure o symbol UU Shape o outside surace R o symbol lassiication symbol o symbol P P P lass lass lass lass Applicable to Miniature FS series

4 Accuracy The accuracy o am Followers is shown in Table, Table., Table. and Table.. am Followers with special accuracy are also available. When they are required, please contact. Table Tolerances Dimensions and symbols Outside dia. o D dia. d Width o ote Series Also applicable to the am Follower, -Lube am Follower and ylindrical Roller am Follower. ote Also applicable to the am Follower. Metric F series rowned ylindrical - h - Miniature FS series See Table. See Table. h - unit: m nch series rowned ylindrical See Table. - Table. Tolerances and allowable values o s (Metric F series cylindrical s( )) unit: m D Dmp ominal outside dia. o Sinle plane mean outside dia. deviation Over ncl. Hih Low Dsp Outside dia. variation in a sinle radial plane (Max.) Table. Tolerances and allowable values o s (Miniature FS series) Dmp Sinle plane mean outside dia. deviation Dmp Mean outside dia. variation (Max.) - K ea Radial runout o assembled bearin (Max.) K ea Radial runout o assembled bearin (Max.) lass lass lass lass lass lass lass lass Hih Low Hih Low Hih Low Hih Low Table. Tolerances and allowable values o s (nch series cylindrical ) D ominal outside dia. o Dmp Sinle plane mean outside dia. deviation Over ncl. Hih Low - Dsp Outside dia. variation in a sinle radial plane (Max.) Dmp Mean outside dia. variation (Max.) unit: m unit: m K ea Radial runout o assembled bearin (Max.) learance The radial internal clearances o am Followers are shown in Table. Table Radial internal clearance F F F F F F F F F ote Also applicable to ull complement type, crowned and sealed type. Only representative types are shown in the table, but this table is applicable to the entire Standard Type am Follower, am Follower and -Lube am Follower. Only representative types are shown in the table, but this table is applicable to the entire Miniature FS series. Fit Metric F series Miniature FS series FS. FS FS dentiication number ylindrical Roller am Followers UF Tables and show recoended tolerances o mountin holes or am Follower studs. Since the am Follower is supported in a cantilever position, the mountin hole diameter should be prepared without play between the stud and the hole especially when heavy shock loads are applied. Table Recoended it Type Metric F series Miniature FS series ylindrical Roller am Followers nch series nch series R R -RH -RH RR-RH-RH R RRH RH R RRH RH RRH RH RH UF RUF R UF-RUF-R Tolerance class o mountin hole or stud H H H F Table Dimensional tolerances o mountin hole ominal outside dia. o stud unit: m Radial internal clearance F H H Over ncl. Over ncl. Over ncl. Over ncl Max. unit: m =.k=.lbs. =.inch

5 Allowable Static Load The applicable load on am Followers is, in some cases, limited by the bendin strenth and shear strenth o the stud and the strenth o the instead o the o the needle roller bearin. Thereore, the imum allowable static load that is limited by these strenths is speciied. Table. Track load capacity Type o bearin Metric F series Miniature FS series dentiication number F R F R F R F R F R F R F-R F R F-R F R F R F R F-R F R F-R F R F-R F-R Track apacity Track capacity is deined as a load which can be continuously applied on a am Follower placed on a steel cam uide surace without causin any deormation or indentation on the cam uide surace when the outer rin o the am Follower makes contact with the matin cam uide surace (plane). The track capacities shown in Tables. and. are applicable when the hardness o the matin cam uide surace is HR (Tensile strenth / ). When the hardness o the matin cam uide surace diers rom HR, the track capacity is obtained by multiplyin the value by the track capacity actor shown in Table. lubrication between the and the matin cam uide surace is insuicient, seizure and/or wear may occur dependin on the application. Thereore, attention must be paid to lubrication and surace rouhness o the matin cam uide especially or hih-speed rotations such as cam mechanisms. For lubrication between the and the matin cam uide surace, -Lube Unit or am Followers is recoended. (See pae.) unit: F F F F F F F- F F- F F F F- F F- F F- F- FS. FS FS. FS FS FS FS otes Only representative types are shown in the table, but this table is applicable to the entire Standard Type am Follower series. Also applicable to am Follower, -Lube am Follower and ylindrical Roller am Follower. Only representative types are shown in the table, but this table is applicable to the entire Miniature FS series. Track capacity dentiication number Track capacity Table. Track capacity Type o bearin dentiication number with crowned Track capacity dentiication number with cylindrical Track capacity dentiication number with crowned Track capacity nch series R R R -R R R R-R R R R R R R R R R R R R R R R R R R R R R R R R R R - R R- R R R R R R R R R R R R R RH -R RH R RH-R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R otes Only representative types are shown in the table, but this table is applicable to the entire nch series. Table Track capacity actor Track capacity actor Hardness Tensile strenth HR / dentiication number with cylindrical RH - RH RH- RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH =.k=.lbs. =.inch unit: Track capacity

6 Allowable Rotational Speed The allowable rotational speed o am Followers is aected by mountin and operatin conditions. For reerence, Table shows d n values when only pure radial loads are applied. onsiderin that axial loads also act under actual operatin conditions, the recoended d n value is / o the value shown in the table. n case o -Lube am Follower, d n value is or less. Table d n values o am Followers Lubricant rease Oil Type aed type Full complement type ylindrical Roller am Follower ote d n value d n where, d diameter n Rotational speed rpm Lubrication rease-prepacked am Followers are shown in Table. The lubricatin rease prepacked in these bearins is ALAA REASE S (SHOWA SHELL SEKYU K.K.). For am Followers without prepacked rease, rease should be packed throuh the oil hole in the stud or use. they are used without rease, wear o rollin contact suraces may take place, leadin to a short bearin lie. Table earins with prepacked rease With prepacked rease Without prepacked rease Type With cae Full Shield Sealed complement Series Size o stud dia. d type type type F d Metric F W d series FES FE d am Follower F -Lube am Followers F W S Miniature series FS FS W entralized F-RU Lubrication Type am Followers F-FU Easy Mountin Type am Followers ylindrical Roller am Followers F-SFU UF nch series R R nch series RH RH otes For Eccentric Type am Followers (FE), thread diameter shown in the table o s is applicable. Thermosettin solid-type lubricant ills inner space o the bearin. Oil Hole The position o oil hole is shown in Table. Perorm reasin quietly by ittin a lubrication nozzle indicated in Table to a straiht type rease un in JS : and pressin the nozzle aainst the rease nipple or re-reasin ittin. Due to their structures, lubrication is not possible or F/F, -Lube am Follower, am Follower and Miniature FS series. Table Position o oil hole Series Size o stud dia. d Standard Type am Follower F Solid Eccentric Type am Follower FES Eccentric Type am Follower FE Thrust Disk Type am Follower F W entralized Lubrication Type am Follower F-RU, F-FU Easy Mountin Type am Follower F-SFU am Follower -Lube am Follower Miniature Type am Follower Thrust Disk Type Miniature am Follower ylindrical Roller am Follower UF nch series am Follower R (With Hexaon socket) nch series am Follower R (With Screw driverslot) nch series am Follower RH (With Hexaon socket) nch series am Follower RH (With Screw driverslot) F d d d d d d d F W /S FS FS W d d d..d d..d d..d d..d Position o oil hole head Oil hole is prepared. outside surace end otes n case o Eccentric Type am Followers (FE), thread diameter shown in the table o s is applicable in place o stud dia. and the oil hole on the outer surace o the stud cannot be used or lubrication. Re-lubrication can be made rom the re-reasin ittin that is inserted into the hexaon hole. See pae. rease nipple is incorporated in the hexaon hole. Re-reasin can be made rom the stud head and the stud end by press ittin a supplied rease nipple into the stud end. See pae. Tapped holes or oil connectors are provided at the stud end and hole o the head. Re-reasin can be made rom the rease nipple in the hexaon hole. =.k=.lbs. =.inch

7 Table Type and Dimension o Lubrication ozzles Type A-T A-R -R A- A- -. R. R. Dimension Width across lats Width across lats Width across lats Width across lats Width across lats Width across lats Width across lats PT/ Width across lats PT/ PT/ Width across lats PT/ Width across lats Width across lats PT/ Width across lats Applicable rease nipple and re-rease ittin PF- PF- Re-rease ittin PF- PF- PT- PT- P P P- P Accessories am Follower accessories are shown in Table. rease nipple s are shown in Table and Table. Dimensions o plu or unused oil hole and s o plu inserter are shown in Table. Table Accessories Attached Accessories Series rease nipple Plu ut Sprin washer Size o stud dia. d Standard Type am Follower F d d Eccentric Type am Follower d FE d Solid Eccentric Type am Follower FES d Thrust Disk Type am Follower F W d entralized Lubrication Type am Follower F RUF FU Easy Mountin Type am Follower F SFU am Follower F -Lube am Follower F W /S Miniature Type am Follower FS Thrust Disk Type Miniature am Follower FS W ylindrical Roller am Follower UF d (With Hexaon socket) nch series am Follower R d d. (With Hexaon socket).d nch series am Follower R (With Screw driverslot) nch series am Follower RH d. (With Hexaon socket) nch series am Follower.d RH (With Screw driverslot) ote For Eccentric Type am Follower FE, thead diameter is applied. Remark: The standard rease nipple (brass) is included in the Stainless Steel Made am Follower. We also have the stainless steel rease nipple. Please contact and request the product. - Width across lats PT/ Width across lats Table Dimensions o rease nipple or standerd am Follwer ode number PF- PF- Dimensions d D L W. Size o stud dia. d PT/ otes This table is applicable except nch series. For Eccentric Type am Follower FE, thread diameter is applied. ote HSP-(Yamada orporation)can be used or them. Remark The above nozzles can be atached on the standard rease un shown below. required, please consult to with type o lubrication nozzle. Lubrication ozzle ody o rease un Table Dimensions o rease nipple or nch series ode number P P P- P Dimensions d D D L L W Applicable am Followers R R-RH- RH R RRH RH R RRH RH RRH RH =.k=.lbs. =.inch

8 Table Dimensions o plu or nch series Dimensions o plu Dimension o inserter ode number Applicable D t d USF USF USF Special Speciication The rease nipple supplied with Metric series am Follower with hexaon socket as an accessory may be replaced with the PT type rease nipple indicated in Table upon your request. required, please order with supplemental code, "/P" at the end o identiication number. Table Dimension o PT type rease nipple ode number PT- PT- ote Example o dentiication umber. F UUR P Dimension o rease nipple d D D L L W.... Size o stud dia. d For Eccentric Type am Follower FE, thread diameter is applied. am Followers R R- R RRH RH RRH RH Table Dimension o assembled PT type rease nipple ode number PT- PT- ote nserter Dimension Size o stud dia. d For Eccentric Type am Follower FE, thread diameter is applied. Operatin Temperature Rane The operatin temperature rane or am Followers is - +. Please pay attention as the types shown in table have dierent rane. Table Restricted Operatin Temperature Rane Type With cae Type Size o stud dia. d Miniature Type am Followers FS d Thrust Disk Type Miniature am FollowersFS W Standard Type am Followers Thrust Disk Type am Followers F F W Stainless Steel Standard Type am Followers F F Stainless Steel Thrust Disk Type am Followers F FW d d d Mountin Make the center axis o the mountin hole perpendicular to the movin direction o the am Follower and match the side shoulder accurately with the seatin surace indicated by in the table o s. (See Fi..) Then, ix the am Follower with the nut. Do not hit the lane head o the am Follower directly with a haer, etc. This may lead to a bearin ailure such as irreular rotation or crackin. -Lube am Followers d Fi. Seatin surace F W /S otes deree in continuous operation. deree or lower is recoended in lon time. The mark on the lane head o the stud indicates the position o the oil hole on the raceway. Avoid locatin the oil hole within the loadin zone. This may lead to a short bearin lie. (See Fi..) The hole located in the middle part o the stud perpendicular to the stud center axis is used or reasin or lockin. Oil Hole Load Fi. Oil hole position and loadin direction When tihtenin the nut, the tihtenin should not exceed the values shown in the table o s. the tihtenin is too lare, it is possible that the threaded portion o the stud will be broken. When there is a possibility o loosenin, a special nut such as a lock nut, sprin washer, or sel-lockin nut should be used. =.k=.lbs. =.inch

9 Solid Eccentric Type am Followers and Eccentric Type am Followers, are mounted in reerence position where mark on the head o stud is located as Fi.. The position can be adjusted appropriately by turnin the stud with a screwdriver or hexaon bar wrench usin the screwdriver slot or hexaon hole o the stud head. The stud is ixed with a nut and a sprin washer, etc. The tihtenin should not exceed the values o imum tihtenin shown in the table o s. When shock loads are applied and the adjusted eccentricity has to be ensured, it is recoended to make holes in the housin, stud and eccentric collar, and ix the stud with a dowel pin as shown in Fi.. However, when the stud diameter is less than (Eccentric collar diameter ), it is diicult to make a hole in the stud because the stud is throuh-hardened. Eccentricity Load dia. Fi. Reerence position or adjustin o Solid Eccentric Type am Followers and Eccentric Type am Follwers Eccentric callor is available or nch series am Followers. am Followers with Eccentric collars, RE are also available. required, please consult with. Table Eccentric collars or nch series am Followers unit: dentiical Outer diameter Lenth Eccentri Applicable number o collar o collar city dia. o collar de d am Followers E. ( ). ( ).. R R - ()()(UU)(R) E. ( ). ( ).. ( R ) R- ()()(UU)(R) E. ( ). ( ).. ( R ) R ()()(UU)(R) E. ( ). ( ).. ( R ) R ()()(UU)(R) E.... ( R ) R ()()(UU)(R) E. ( ). ( ).. ( R ) R ()()(UU)(R) E. ( ). ( ).. ( R ) R ()()(UU)(R) E.... ( R ) R ()()(UU)(R) E. ( ). ( ).. ( ) R UU Option Parts -Lube Unit or am Followers Structure and eatures -Lube unit or am Follower is a lubrication part to be mounted on the am Follower and its interal capillary lubricatin element has a lot o lubrication oil imprenated in it. The capillary lubricatin element is consecutive porous resin ormed by sinter moldin o ine resin powder and a lot o lubrication oil is imprenated in it by usin the capillary action that occurs within the internal space. -Lube unit -Lube -Lube am Follower Reular lubrication is not needed as lubrication oil is supplied onto the outside diameter surace o the and matin uide surace (cam uide surace). The rease is not scattered and contamination o the surroundin environment is prevented. The combination with -Lube cam ollower (See Pae ) realizes maintenance-ree cam ollower inside and cam uide surace. Structure o -Lube Unit or am Followers Maniied photos o -Lube eore imprenatin oil Fusion- bonded Resin particles are stronly usion bonded. Ater imprenatin oil Resin part Lubricant part Lubricant is retained in cavities amonst resin particles. Dowel pin For mountin Easy Mountin Type am Followers, it is recoended to ix the ixin screw rom the upper side to the stepped portion o the stud. (See Fi..) dentiication number The identiication number example o Unit is shown below. -Lube Allowable rotation speed The rotation speed o am Follower with -Lube Unit should not exceeded d n=, or reerence. Fi. Mountin example o Solid Eccentric Type am Follower n case o Eccentric Type am Followers (FE), the lenth o the mountin hole should be more than. loner than the (Eccentric collar width) shown in the table o s. (See Fi..) Fi. Mountin example o Easy Mountin Type am Follower Precaution For Use Do not wash -Lube am Follower with oranic solvent and/or white kerosene, which have the ability o removin at nor leave them in contact with the above aents. Model code Size o L (Size o combined am Follower) unit : d nd n d : diameter o am Follower, n : Rotational speed, rpm Minimum rotational anle Lubricatin oil is supplied to the whole external diameter surace o the. Accordinly, use the product in a condition in which the makes one or more turns. Operatin temperature Allowable operatin temperature rane o Follower with -Lube Unit is - to. am Fi. Lenth o the mountin hole o Eccentric Type am Follower To ensure normal rotation o the -Lube am Follower, apply a load o % or over o the dynamic at use. =.k=.lbs. =.inch

10 Mountin Precaution or use Table Dimensions o -Lube Unit or am Followers Set the -Lube Unit perpendicularly to the center axis o am Follower and ix toether with am Follower by tihtenin nut. Do not wash with oranic solvent and/or white kerosene, which have the ability o removin at nor leave them in contact with the above aents. Do not apply a load onto the -Lube Unit directly. Fi. Mountin o -Lube Unit Position o -Lube Unit is adjustable. -Lube Unit must be positioned avoidin loadin direction. To ensure normal rotation o the am Follower, apply a load o % or over o the dynamic load ratin at use. Also, the needs to be rotate over a revolution to supply lubricant on entire outer diameter surace. The imum allowable load on am Follower with -Lube Unit is, % o the imum allowable load o the needle bearin. -Lube Unit may be damaed and inluenced to the smooth roatation and lubricatin perormance by excessive load. Model number L L.. oundary Dimensions W H T t..... Model number F F Applicable am Followers oundary Dimensions D. Load Fi. Load direction o am Follwer When tihtenin the nut, the tihtenin should not be exceeded the value imum tihtenin on table. n case loosenin o the nut is predicted due to vibration, usin lock nut, sprin washer and other special washer are recoended. Ater assemlin -Lube Unit and am Followers in the machine, please conirm that -Lube unit provides oil correctly to the cam uide surace beore actual operation. Do not use in the environment which contamination o liquid and/or harmul orein matter are expected. Replace with new -Lube Unit when inside oil inishes completely. Re-lubrication is not possible. L L L - L L - L L L L ote Only representative types shown in the table, but also applicable to the same size o Metric series, am Follower with thrust disk type, centralized lubrication type, -Lube am Followers and ylindrical Roller am Followers. ombine with -Lube am Followers is stronly recoended or ull maintenance ree. Remark Load on the am Follower with the -Lube unit equipped must be up to % o the imum allowable static load o the am Follower to be combined. For the imum allowed static load o each am Follower, please see the tables o respective models.... F F F - F F - F F F F =.k=.lbs. =.inch

11 AM FOLLOWERS Standard Type am Followers With ae/with Hexaon Hole dia. FR F FUUR FUU dia. F R F dentiication number F UUR F UU (Re.). D d M. oundary s H r smin.. Mountin. tihtenin -m. asic dynamic asic static allowable static load F R F F UUR F UU. M F R F F UUR F UU. M F R F F UUR F UU. M..... F F R RM F F M F F UUR UURM F F UU UUM.. M. M F R F F RM F F - R F - RM M F - F - M F UUR F UURM F - UUR F - UURM F UU F UUM F - UU F - UUM M. M M. M F R F - R F F - F UUR F - UUR F UU F - UU M. M F R F F UUR F UU M F R F F UUR F UU M F R F - R F F - F UUR F - UUR F UU F - UU M. M F R F - R F F - F UUR F - UUR F UU F - UU M. M F R F - R F - R F F - F - F UUR F - UUR F - UUR F UU F - UU F - UU M. M. M. ote( ) Minimum allowable value o chamer r Remarks. Models with a stud diameter d o or less have no oil hole. For models with a stud dia. to, oil hole (re-reasin ittin) is provided at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole each on the outside surace and end surace o the stud.. models with a stud diameter d o or less and the sealed type models are provided with prepacked rease. Other models are not provided with prepacked rease. Perorm proper lubrication or use. =.k=.lbs. =.inch

12 AM FOLLOWERS Standard Type am Followers Full omplement Type/With Hexaon Hole dia. FR F FUUR FUU dia. F R F dentiication number F UUR F UU (Re.) D d oundary s M.. H. r smin. Mountin tihtenin -m. asic dynamic asic static allowable static load F F R RM F F M F F UUR UURM F F UU UUM M. M F R F RM F - R F - RM F F M F - F - M UUR F UURM F F F F - UUR F - UURM UU UUM F - UU F - UUM M. M M. M F R F - R F R F F - F F UUR F - UUR F UUR F UU F - UU F UU M. M. M F R F F UUR F UU M F R F - R F F - F UUR F - UUR F UU F - UU M. M F R F - R F F - F UUR F - UUR F UU F - UU M. M F R F - R F - R F F - F - F UUR F - UUR F - UUR F UU F - UU F - UU M. M. M. ote( ) Minimum allowable value o chamer r Remarks. Models with a stud diameter d o or less have an oil hole (re-reasin ittin) at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole each on the outside surace and end surace o the stud.. Provided with prepacked rease. =.k=.lbs. =.inch

13 AM FOLLOWERS Stainless Steel Made am Followers With ae/with Hexaon Hole dia. FFR FF FFUUR FFUU dia. F FR F F dentiication number F FUUR F FUU (Re.). D d M. oundary s. H r smin. Mountin. tihtenin -m. asic dynamic asic static allowable static load F FR F F F FUUR F FUU. M F FR F F F FUUR F FUU. M F FR F F F FUUR F FUR. M..... F FR F F F FUUR F FUR. M F FR F - FR F FR F - FR F F F - F F F F - F F FUUR F - FUUR F FUUR F - FUUR F FUR F - FUR F FUR F - FUR M. M F FR F F F FUUR F FUR M F FR F F F FUUR F FUR M F FR F - FR F F F - F F FUUR F FUR F - FUUR F - FUR M..... ote( ) Minimum allowable value o chamer r Remarks. Models with a stud diameter d o or less have no oil hole. For models with a stud dia. to, oil hole (re-reasin ittin) is provided at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole each on the outside surace and end surace o the stud.. models with a stud diameter d o or less and the sealed type models are provided with prepacked rease. Other models are not provided with prepacked rease. Perorm proper lubrication or use. =.k=.lbs. =.inch

14 AM FOLLOWERS Solid Eccentric Type am Followers With ae/with Hexaon Hole Eccentricity dia. FESR FES FESUUR FESUU dia. FES R FES dentiication number FES UUR FES UU (Re.). D d M oundary s Eccentricity H r smin..... ε Mountin tihtenin -m. asic dynamic asic static allowable static load FES R FES FES UUR FES UU. M FES R FES - R FES FES - FES UUR FES - UUR FES UU FES - UU M. M FES R FES - R FES FES - FES UUR FES - UUR FES UU FES - UU M. M FES R FES FES UUR FES UU M FES R FES FES UUR FES UU M ote( ) Minimum allowable value o chamer r Remarks. Models with a stud diameter d o or less have an oil hole (re-reasin ittin) at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole each on the outside surace and end surace o the stud.. models with a stud diameter d o or less and the sealed type models are provided with prepacked rease. Other models are not provided with prepacked rease. Perorm proper lubrication or use. =.k=.lbs. =.inch

15 AM FOLLOWERS Eccentric Type am Followers With ae/with Hexaon Hole Eccentricity Outside diameter o eccentric collar FER FE FEUUR FEUU Outside diameter o eccentric collar FE R FE dentiication number FE UUR FE UU (Re.). D d e M oundary s Eccentricity H r smin ε Mountin tihtenin -m. asic dynamic asic static allowable static load FE R FE FE UUR FE UU M FE R FE - R FE FE - FE UUR FE - UUR FE UU FE - UU. M.. M FE R FE - R FE FE - FE UUR FE - UUR FE UU FE - UU M. M FE R FE FE UUR FE UU M FE R FE R FE - R FE FE FE - FE UUR FE UUR FE - UUR FE UU FE UU FE - UU M. M. M FE R FE - R FE FE - FE UUR FE - UUR FE UU FE - UU M. M FE R FE - R FE - R FE FE - FE - FE UUR FE - UUR FE - UUR FE UU FE - UU FE - UU M. M. M ote( ) Minimum allowable value o chamer r Remarks. Models with a thread diameter o or less have an oil hole (re-reasin ittin) at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole on the end surace o the stud.. models with a stud thread diameter o or less and the sealed type models are provided with prepacked rease. Other models are not provided with prepacked rease. Perorm proper lubrication or use. =.k=.lbs. =.inch

16 AM FOLLOWERS Eccentric Type am Followers Full omplement Type/With Hexaon Hole Eccentricity Outside diameter o eccentric collar FER FE FEUUR FEUU Outside diameter o eccentric collar FE R FE dentiication number FE UUR FE UU (Re.) D d e M oundary s Eccentricity H r smin ε Mountin tihtenin -m. asic dynamic asic static allowable static load FE R FE FE UUR FE UU. M FE R FE - R FE FE - FE UUR FE - UUR FE UU FE - UU. M. M FE R FE - R FE FE - FE UUR FE - UUR FE UU FE - UU M. M FE R FE FE UUR FE UU M FE R FE R FE - R FE FE FE - FE UUR FE UUR FE - UUR FE UU FE UU FE - UU M. M. M FE R FE - R FE FE - FE UUR FE - UUR FE UU FE - UU M. M FE R FE - R FE - R FE FE - FE - FE UUR FE - UUR FE - UUR FE UU FE - UU FE - UU M. M. M ote( ) Minimum allowable value o chamer r Remarks. Models with a thread diameter o or less have an oil hole (re-reasin ittin) at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole on the end surace o the stud.. Provided with prepacked rease. =.k=.lbs. =.inch

17 AM FOLLOWERS Thrust Disk Type am Followers With ae/with Hexaon Hole dia. FWR FWUUR dia. dentiication number (Re.) D d oundary s H Mountin tihtenin -m asic dynamic asic static allowable static load F WR F WUUR. M.... F WR F WUUR. M..... F WR F WUUR.. M.... F WR F WUUR. M.... F WR F WUUR F WR F - WR F WUUR F - WUUR. M. M. M F WR F - WR F WUUR F - WUUR M. M F WR F WUUR M F WR F WUUR M F WR F - WR F WUUR F - WUUR M. M Remarks. Models with a stud diameter d o or less have no oil hole. For Models with a stud dia. to, oil hole (re-reasin ittin) is provided at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole each on the outside surace and end surace o the stud.. models with a stud diameter d o or less and the sealed type models are provided with prepacked rease. Other models are not provided with prepacked rease. Perorm proper lubrication or use. =.k=.lbs. =.inch

18 AM FOLLOWERS Thrust Disk Type am Followers With ae/with Hexaon Hole dia. FFWR FFWUUR dia. dentiication number (Re.) D d oundary s H Mountin tihtenin -m asic dynamic asic static allowable static load F FWR F FWUUR. M.... F FWR F FWUUR. M..... F FWR F FWUUR.. M.... Remarks. Models with a stud diameter d o or less have no oil hole. For Models with a stud dia., oil hole (re-reasin ittin) is provided at the head.. Provided with prepacked rease. =.k=.lbs. =.inch

19 AM FOLLOWERS entralized Lubrication Type am Followers With ae/with Screwdriver Slot dia. FRU FFU dia. dentiication number (Re.) oundary s F-RU- F-FU-. M F-RU- F-FU-. M. F-RU- F-RU-- F-RU- F-RU-- F-FU- F-FU-- F-FU- F-FU-- M. M. M. M. F-RU- F-FU- M. F-RU- F-FU- M. F-RU- F-RU-- F-RU- F-RU-- F-RU- F-RU-- F-RU-- F-FU- F-FU-- F-FU- F-FU-- F-FU- F-FU-- F-FU-- D d M. M. M. M. M. M. M M. PT PT M M r s min Mountin tihtenin -m asic dynamic asic static allowable static load ote( ) Minimum allowable value o chamer r Remarks. Models with a stud diameter d o or less are provided with a lubrication tapped hole on the stud head only. Other models are provided with one lubrication tapped hole each on the head and end surace o the stud.. Provided with prepacked rease. =.k=.lbs. =.inch

20 AM FOLLOWERS Easy Mountin Type am Followers With ae/with Hexaon Hole dia. F-SFU dia. dentiication number (Re.)..... oundary s F-SFU-.... F-SFU- F-SFU- F-SFU-- F-SFU- F-SFU--.. F-SFU-.... F-SFU-.... F-SFU- F-SFU-- D d L L H e.... Mountin s Tolerance r s min D... t h (Re.) asic dynamic asic static allowable static load ote( ) Minimum allowable value o chamer r Remarks. Models with a stud diameter d o or less have an oil hole (re-reasin ittin) at the head. Other models are provided with an oil hole (rease nipple) at the head.. Provided with prepacked rease. =.k=.lbs. =.inch

21 AM FOLLOWERS am Follower With ae/with Hexaon Hole r D r H d dia. F dia. dentiication number F (Re.). D d oundary s M.. H. ( ) r s min. Mountin Radial internal clearance m Max. tihtenin -m. asic dynamic asic static allowable static load F. M F F -.. M. M F F -. M. M F M F F F - M. M. M ote( ) Minimum allowable value o chamer r. Remarks. This bearin cannot be re-lubricated due to its structure. re-lubrication is necessary, please use Standard Type am Followers. Remarks. Provided with prepacked rease. =.k=.lbs. =.inch

22 AM FOLLOWERS -Lube am Followers With ae / With Hexaon Hole H D R= d dia. dia. dentiication number (Re.) oundary s D d H Mountin tihtenin -m asic dynamic asic static allowable static load F WUUR/S. M..... F WUUR/S. M.... F WUUR/S. M..... F WUUR/S F - WUUR/S M. M F WUUR/S F - WUUR/S M. M F WUUR/S F WUUR/S F WUUR/S F - WUUR/S M. M. M. M Remark Rereasin is not possible as the bearin internal space is illed with thermosettin solid-type lubricant -Lube. =.k=.lbs. =.inch

23 AM FOLLOWERS Miniature Type am Followers With ae/with Hexaon Hole Full omplement Type/With Hexaon Hole dia. FS FS dia. dentiication number With cae Full complement (Re.) D d oundary s H Mountin tihtenin -m asic dynamic asic static allowable static load. FS FS. FS FS FS FS. FS FS M. M. M.. M.. M. M. M. M FS FS FS FS M. M. M M Remarks. o oil hole is provided.. Provided with prepacked rease. =.k=.lbs. =.inch

24 AM FOLLOWERS Miniature Type am Followers Stainless Steel Made With ae/with Hexaon Hole Full omplement Type/With Hexaon Hole dia. FSF FS dia. dentiication number With cae Full complement (Re.) D d oundary s H Mountin tihtenin -cm asic dynamic asic static allowable static load. FS F FS. F FS F FS. F M. M. M.. M FS FS F F FS FS F F M. M. M. M FS FS F F FS FS F F M. M. M M Remarks. o oil hole is provided.. Provided with prepacked rease. =.k=.lbs. =.inch

25 D AM FOLLOWERS Thrust Disk Type Miniature am Followers With Hexaon Hole H d dia.. FS. W FS W dia... dentiication number With cae Full complement FS W FS. W FS. W FS W FS W FS W FS W (Re.).. D d..... oundary s M... M. M... M. M. M. M H Mountin tihtenin -cm..... asic dynamic asic static allowable static load Remarks. o oil hole is provided.. Provided with prepacked rease. =.k=.lbs. =.inch

26 AM FOLLOWERS Thrust Disk Type Miniature am FollowersStainless Steel Made With ae/with Hexaon Hole D H d dia. FSW FSFW FS dia. dentiication number (Re.) D d oundary s FS FW... M... FS. FW. M... FS FW M.. FS FW M. FS FW M. FS FW M.... Mountin asic dynamic asic static tihtenin allowable static load H -cm Remarks. o oil hole is provided.. Provided with prepacked rease. =.k=.lbs. =.inch

27 AM FOLLOWERS ylindrical Roller am Followers Full ompliment Type/With Hexaon Hole dia. UFR dia. dentiication number (Re.) D d oundary s UF R M... UF - R M... UF R M... UF - R M... UF R M.... UF R M.... UF R M.... UF - R M.... UF R M.... UF - R M.... UF R M. UF - R M H Mountin tihtenin -m asic dynamic asic static allowable static load Remarks. For models with a stud diameter d o, oil hole (re-reasin ittin) is provided at the head. Other models are provided with an oil hole (rease nipple) at the head and an oil hole each on the outside surace and end surace o the stud.. Provided with prepacked rease. =.k=.lbs. =.inch

28 AM FOLLOWERS nch Series am Followers With ae/with Hexaon Hole dia... RR R RUUR RUU dia. (inch). R R R - R. R R!/ R - R. R R #/ R R. R R &/ R R. R R!/ R R. R R %/ R R. R R #/ R R. R R &/ R R dentiication number R R UUR R UU R - R - UUR R - UU R R UUR R UU R - R - UUR R - UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU (Re.) D d.!/.!!/..!/. #/.. %/.!#/.!/. %/. &/.!/. #/.!/. #/. &/.!/. #/.. %/. &/.!/. %/. &/.!/. #/.!/. #/. #/.!/.!/. &/. %/. %/. &/. %/. #/.. #/. &/.. #/..!/. &/.!/.!/. &/ UF o.- o.-!/ -!/ - #/ / - #/ / - &/ - &/ -!/ / -!/ / - %/ / - %/ / - #/ / - #/ / - &/ / - &/ / -.!/.!/. %/. %/. #/. #/.!/.!/. %/. %/. #/. #/. &/. &/ oundary s (inch) H r.!/. %/. %/. #/. &/. &/...!/.!/.!/.!/. #/. #/ !/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/. #/. #/. #/. #/. #/. #/.!/.!/.!/.!/. #/. %/. #/. %/. #/. #/. %/. %/. #/. #/. #/. #/.!/.!/.!/.!/. #/. #/.!/.!/.!/.!/. %/. %/. %/. %/. #/. $%/.!/. #/.!/.!/.!/.!/ Mountin (inch). %%/. %%/. #/. #/.!/. (/.!/. (/.!/.!%/.!/.!%/ tihtenin -m asic dynamic asic static Remarks. Models with a stud diameter d o. or less have no oil hole. Other models are provided with one oil hole each on the outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

29 AM FOLLOWERS nch Series am Followers With ae/with Screwdriver Slot dia... RR R RUUR RUU dia. (inch)..!/. #/. &/.!/. %/. #/. &/ R R R - R R R R - R R R R R R R R R R R R R R R R R R R R R R R R R dentiication number R R - R R - R R R R R R R R R R R R R UUR R - UUR R UUR R - UUR R UUR R UUR R UUR R UUR R UUR R UUR R UUR R UUR R UUR R UUR R UUR R UUR R UU R - UU R UU R - UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU (Re.) D d.!/.!!/.!/. #/... %/.!#/.!/. %/. &/.!/. #/.!/. #/. &/.!/. #/.. %/. &/.!/. %/. &/.!/. #/.!/. #/. #/.!/.!/. &/. %/. %/. &/. %/. #/.. #/. &/.. #/..!/. &/.!/.!/. &/ UF o.- o.-!/ -!/ - #/ - #/ - &/ - &/ -!/ -!/ - %/ - %/ - #/ - #/ - &/ - &/ -.!/.!/. %/. %/. #/. #/.!/.!/. %/. %/. #/. #/. &/. &/ oundary s.!/. %/. %/. #/. &/. &/...!/.!/.!/.!/. #/. #/ !/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/ (inch) r.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/ *.!/ *.!/ *.!/ *.!/.!/.!/. #/. #/. #/. #/. #/. #/. #/. #/.!/.!/.!/.!/. #/. %/. #/. %/. #/. #/. %/. %/. #/. #/. #/. #/.!/.!/.!/.!/. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/ $%/. #/. %%/. %%/. #/. #/. (/. (/.!%/.!%/ tihtenin -m asic dynamic asic static Remarks. Models with a stud diameter d o. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

30 AM FOLLOWERS nch Series am Followers Full omplement Type/With Hexaon Hole dia... RR R RUUR RUU dia. (inch). R R R - R. R R!/ R - R. R R #/ R R. R R &/ R R. R R!/ R R. R R %/ R R. R R #/ R R. R R &/ R R dentiication number R R UUR R UU R - R - UUR R - UU R R UUR R UU R - R - UUR R - UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU R R UUR R UU (Re.) D d.!/.!!/.!/. #/... %/.!#/.!/. %/. &/.!/. #/.!/. #/. &/.!/. #/.. %/. &/.!/. %/. &/.!/. #/.!/. #/. #/.!/.!/. &/. %/. %/. &/. %/. #/.. #/. &/.. #/..!/. &/.!/.!/. &/ UF o.- o.-!/ -!/ - #/ - #/ - &/ - &/ -!/ -!/ - %/ - %/ - #/ - #/ - &/ - &/ -.!/.!/. %/. %/. #/. #/.!/.!/. %/. %/. #/. #/. &/. &/ oundary s.!/. %/. %/. #/. &/. &/...!/.!/.!/.!/. #/. #/ !/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/ (inch) H r.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/. #/. #/. #/. #/. #/. #/.!/.!/.!/.!/. #/. %/. #/. %/. #/. #/. #/. #/. %/. %/. #/. #/.!/.!/.!/.!/.!/.!/ #/.!/.!&/. #/.!/.!(/.!/. #/. $%/.!/.!/. #/.!/.!/. %%/.!/.!/. %%/. %/.!/. #/. %/.!/. #/. %/.!/. (/. %/.!/. (/. &/.!/.!%/. &/.!/.!%/ tihtenin -m asic dynamic asic static Remarks. Models with a stud diameter d o. or less have no oil hole. Other models are provided with one oil hole each on the outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

31 AM FOLLOWERS nch Series am Followers Full omplement Type/With Screwdriver Slot dia... RR R RUUR RUU dia. (inch). R R R - R. R R!/ R - R. R R #/ R R. R R &/ R R. R R!/ R R. R R %/ R R. R R #/ R R. R R &/ R R.!/ dentiication number R R UUR R - R - UUR R R UUR R - R - UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R R UUR R UU R - UU R UU R - UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU R UU (Re.) D d.!/.!!/.!/. #/... %/.!#/.!/. %/. &/.!/. #/.!/. #/. &/.!/. #/.. %/. &/.!/. %/. &/.!/. #/.!/. #/. #/.!/.!/. &/. %/. %/. &/. %/. #/.. #/. &/.. #/..!/. &/.!/.!/. &/ UF o.- o.-!/ -!/ - #/ - #/ - &/ - &/ -!/ -!/ - %/ - %/ - #/ - #/ - &/ - &/ -..!/!/. %/. %/. #/. #/.!/.!/. %/. %/. #/. #/.. &/ &/.... #/.!/!/ -.!/ oundary s.!/. %/. %/. #/. &/. &/...!/.!/.!/.!/. #/. #/ !/.!/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/. %/ (inch) r.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/ *.!/ *.!/ *.!/ *.!/. #/. #/. #/. #/. #/. #/. #/. #/.!/.!/.!/.!/. #/. %/. #/. %/. #/. %/. #/. %/. #/. #/. #/. $%/.!/. #/.!/. %%/.!/. %%/.!/. #/.!/. #/.!/. (/.!/. (/.!/.!/ Mountin (inch).!%/.!%/.!/. #/. #/. #/ tihtenin -m asic dynamic asic static Remarks. Models with a stud diameter d o. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

32 AM FOLLOWERS nch Series Heavy Duty am Followers Full omplement Type/With Hexaon Hole dia... RHR RHUUR dia. (inch).!/ dentiication number RH - R RH R RH - UUR RH UUR (Re.). RH - R RH - UUR %/ RH. RH &/ RH. RH %/ RH. RH #/ RH. RH &/ RH. RH RH. RH!/RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH R RH UUR UUR UUR UUR UUR UUR UUR UUR UUR UUR UUR UUR UUR. RH R RH UUR!/RH R RH UUR. RH R RH UUR!/RH R RH UUR. RH #/ R RH UUR D d.!/. (/. #/. #/.!/.!/. %/. &/. %/.!!/. &/. %/. #/.!/. &/. &/.!/. &/.. %/. %/.!/. %/. %/.!/. #/. #/. #/. #/. #/.!/. &/. &/. %/. &/. &/. #/... &/....!/.!/.!/.!/.!/.!/.!/.!/. #/.!/.!/.. #/.!/.!/. #/.!/.!/.. #/ UF!/ -!/ - %/ - % / - &/ - &/ - %/ - %/ - #/ - #/ - &/ - &/ - - US - US!/ -!/ -!/ -!/ -!/ -!/ - #/ - U...!/.!/.!/.!/.!/...!/... %/... %/... #/... #/...!/...!/... %/... %/... #/... #/..). &/... &/ #/.. oundary s. %/. %/. #/. #/. &/. &/...!/.!/.!/.!/. #/. #/...!/.!/.!/.!/. #/.!/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/ (inch) H R.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!!/.!/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. (/.!/. #/. (/.!/. #/. %/. %/.!/.!/.!/. #/. #/. #/. #/. # /. #/. #/. #/. #/. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/.!/.! /.!/.!/. %/. %/. %/. %/. & /. &/.!/.!/. #/. #/. #/ ^!/. ^!/.!/.!/.!(/.!(/.!%/.!%/. #(/. #(/. #/. tihtenin -m asic dynamic asic static. RH R RH UUR..!/. - U.!/...!/. #/.!/.!/.!/. #/. #%/ Remarks. Models with a stud diameter d o. or less have no oil hole. Other models are provided with one oil hole each on the outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

33 AM FOLLOWERS nch Series Heavy Duty am Followers Full omplement Type/With Hexaon Hole dia... RH RHUU dia. (inch).!/. %/ dentiication number RH - RH RH - RH. RH &/ RH. RH %/ RH. RH #/ RH. RH &/ RH. RH RH. RH!/ RH. RH!/ RH. RH!/ RH. RH #/ RH - UU RH UU RH - UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU (Re.) D d.!/. (/. #/. #/.!/.!/. %/. &/. %/.!!/. &/. %/. #/.!/. &/. &/.!/. &/.. %/. %/.!/. %/. %/.!/. #/. #/. #/. #/. #/.!/. &/. &/. %/. &/. &/. #/... &/....!/.!/.!/.!/.!/.!/.!/.!/. #/.!/.!/.. #/.!/.!/. #/.!/.!/.. #/ UF!/ -!/ - %/ - %/ - &/ - &/ - %/ - %/ - #/ - #/ - &/ - &/ - - US - US!/ -!/ -!/ -!/ -!/ -!/ - #/ -U...!/.!/.!/.!/.!/...!/... %/... %/... #/... #/...!/...!/... %/... %/... #/... #/... &/... &/ #/.. oundary s. %/. %/. #/. #/. &/. &/...!/.!/.!/.!/. #/. #/...!/.!/.!/.!/. #/.!/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/ (inch) H r.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. (/.!/. #/. (/.!/. #/. %/. %/.!!/.!/.!/.!/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/.!/.!/.!/.!/. %/. %/. %/. %/. &/. &/.!/.!/. #/. #/. #/.!/.!/.!/.!/.!/.!/. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/. #/. #/. #/ ^!/. ^!/.!/.!/.!(/.!(/.!%/.!%/. #(/. #(/. #/. #/ tihtenin -m @#/ asic dynamic asic static. RH RH UU..!/. - U.!/...!/. #/.!/.!/.!/. #/. #/.#%/ Remarks. Models with a stud diameter d o. or less have no oil hole. Other models are provided with one oil hole each on the outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

34 AM FOLLOWERS nch Series Heavy Duty am Followers Full omplement Type/With Screwdriver Slot dia... RHR RHUUR dia. (inch).!/. %/ dentiication number RH - R RH R RH - R RH R. RH &/ RH. RH %/ RH. RH #/ RH. RH &/ RH. RH RH. RH!/ RH. RH!/ RH. RH!/ RH. RH #/ R R R R R R R R R R R R R R R R R RH - UUR RH UUR RH - UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR RH UUR (Re.) D d.!/. (/. #/. #/.! /.! /. %/. &/. %/.!!/. &/. %/. #/.!/. &/. &/.!/. &/.. %/. %/.!/. %/. %/.!/. #/. #/. #/. #/. #/.!/. &/. &/. %/. &/. &/. #/... &/....!/.!/.!/.!/.!/.!/.!/.!/. #/.!/.!/.. #/.!/.!/. #/.!/.!/.. #/ UF!/ -!/ - %/ - %/ - &/ - &/ - %/ - %/ - #/ - #/ - &/ - &/ - - US - US!/ -!/ -!/ -!/ -!/ -!/ - #/ - U.!/.!/. %/. %/. #/. #/.!/.!/. %/. %/. #/. #/. &/. &/ !/...!/...!/...!/... #/.. oundary s. %/. %/. #/. #/. &/. &/...!/.!/.!/.!/. #/. #/...!/.!/.!/.!/. #/.!/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/ (inch) R.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/ *.!/ *.!/ *.!/ *.!/. #/. #/. # /. #/. #/. #/. #/. #/. #/. #/. # /. #/. #/. #/. #/. #/. #/. # /. #/. #/. (/.!/. #/. (/.!/. #/. %/. %/.!!/.!/.!/.!/. #/. #/.!/.!/.!/.!/.!/.!/.!/ ^!/. ^!/.!/.!/.!(/.!(/.!%/.!%/. #(/. #(/. #/. tihtenin -m asic dynamic asic static. RH R RH UUR..!/. - U.!/...!/. #/.!/.!/.!/. #%/ Remarks. Models with a stud diameter d o. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch

35 AM FOLLOWERS nch Series Heavy Duty am Followers Full omplement Type/With Screwdriver Slot dia... RH RHUU dia. (inch).!/. %/. &/. %/. #/. &/..!/.!/.!/. #/ dentiication number RH - RH RH - RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH RH - UU RH UU RH - UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU RH UU (Re.) D d.!/. (/. #/. #/.!/.!/. %/. &/. %/.!!/. &/. %/. #/.!/. &/. &/.!/. &/.. %/. %/.!/. %/. %/.!/. #/. #/. #/. #/. #/.!/. &/. &/. %/. &/. &/. #/... &/....!/.!/.!/.!/.!/.!/.!/.!/. #/.!/.!/.. #/.!/.!/. #/.!/.!/.. #/ UF!/ -!/ - %/ - %/ - &/ - &/ - %/ - %/ - #/ - #/ - &/ - &/ - - US - US!/ -!/ -!/ -!/ -!/ -!/ - #/ - U.!/.!/. %/. %/. #/. #/.!/.!/. %/. %/. #/. #/. &/. &/ !/...!/...!/...!/... #/.. oundary s. %/. %/. #/. #/. &/. &/...!/.!/.!/.!/. #/. #/...!/.!/.!/.!/. #/.!/.!/.!/.!/. %/. %/. #/. #/. &/. &/.!/.!/ (inch) r.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. (/.!/. (/.!/. %/. %/.!!/.!/.!/.!/ *.!/ *.!/ *.!/ *.!/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/. #/.!/.!/.!/. #/. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/.!/.!/.!/.!/.!/.!/.!/.!/.!/. #/. #/. #/. #/. #/ ^!/. ^!/.!/.!/.!(/.!(/.!%/.!%/. #(/. #(/. #/. #/ tihtenin -m @#/ asic dynamic asic static. RH RH UU..!/. - U.!/...!/. #/.!/.!/.!/. #/.#%/ Remarks. Models with a stud diameter d o. or less (marked *) are provided with an oil hole on the stud head only. Other models are provided with one oil hole each on the head, outside surace and end surace o the stud.. Provided with prepacked rease.. For the imum allowable static load, please contact. =.k=.lbs. =.inch