I Thrust disk Cage. Structure and Features

Transcription

1 Stuctue and Featues Standad Type am Followes Stainless Steel Made am Followes ouble ex ole am Followes Solid Eccentic Type am Followes Eccentic Type am Followes Thust isk Type am Followes Easy Type am Followes am Followe -Lube am Followes Miniatue Type am Followes Stainless Steel Made Miniatue am Followes Thust isk Type Miniatue am Followes entalized Lubication Type am Followes ylindical Rolle am Followes am Followes ae beains with a stud incopoatin needle olles in a thick walled. These beains ae desined o otation, and have supeio otational peomance with a small coeicient o iction and hih load capacity. As studs aleady have theads o steps, they ae easy to mount. am Followes ae ollowe beains o cam mechanisms and linea motions and have hih iidity and Stuctue o am Followes hih accuacy. They ae, theeoe, used widely o machine tools, industial obots, electonic devices, and OA equipment. Stainless steel made am Followes ae supeio in coosion esistance and suitable o applications in envionments whee oil cannot be used o wate splashed, and in clean ooms. Standad Type am Followe( ) Thust isk Type am Followe() am Followe () Seal Seal ae Thust disk ae ae Side plate Side plate Side plate eedle olle eedle olle eedle olle Oute in Oute in Oute in -Lube am Followe( ) Seal Miniatue Type am Followe ylindical Rolle am Followe Thust disk ae Shield plate ae Side plate Side plate Side plate eedle olle eedle olle ylindical olle Oute in Oute in Oute in ote n case o the stud diamete (d ) to, a e-easin ittin is povided in the stud head hex hole. The stud diamete (d ) to, a ease nipple is povided in the stud head hex hole. needed, contact. Themosettin solid-type lubicant ills inne space o the beain.

2 Types Fo am Followes, the types shown in Table ae available. Table Type o am Followes eain Model Metic F seies Standad Type am Followes F ouble ex ole am Followes FKR Solid Eccentic Type am Followes FES Eccentic Type am Followes FE Thust isk Type am Followes steel made hole tem With cae Full complement owned ylindical owned ylindical Shield type F R F F V R F V ih cabon With hexaon Stainless steel made hole With hexaon ih cabon With double steel made hexaon hole steel made hole Sealed type F UUR F UU F VUUR F VUU Shield type F F R F F Sealed type F FUUR F FUU Shield type FKRR FKR FKRV R FKRV Sealed type FKRUUR FKRUU FKRVUUR FKRVUU Shield type FES R FES ih cabon With hexaon steel made hole Sealed type FES UUR FES UU ih cabon With hexaon Shield type FE R FE FE V R FE V Sealed type FE UUR FE UU FE VUUR FE VUU ih cabon With hexaon Shield type F W R steel made hole Sealed type F WUUR F W Stainless With hexaon Shield type F FW R steel made hole Sealed type F FWUUR entalized Lubication Type ih cabon With scewdive am Followes Sealed type F-RU steel made slot F-RU, F-FU F-FU Easy Type ih cabon With hexaon am Followes steel made hole F-SFU Sealed type F-SFU am Followe ih cabon With hexaon F steel made hole Shield type F -Lube am Followes ih cabon With hexaon F W /S steel made hole Sealed type F WS ih cabon With hexaon Miniatue Type am Shield type FS FS V steel made hole Followes Stainless With hexaon FS Shield type FSF FS FV steel made hole ih cabon With hexaon Thust isk Type Miniatue Shield type FS W FS WV am Followes steel made hole Stainless With hexaon FS W Shield type FSFW steel made hole ylindical Rolle am Followes ih cabon With hexaon UF steel made hole Shield type UF R Miniatue FS seies nch seies nch Seies am Followes R nch Seies am Followes R ih cabon hole With hexaon Shield type R R R R V R R V Sealed type R UUR R UU R VUUR R VUU steel made With scewdive Shield type R R R R V R R V slot Sealed type R UUR R UU R V UUR R V UU With hexaon Shield type R V R R V ih cabon hole Sealed type R VUUR R VUU steel made With scewdive Shield type R V R R V slot Sealed type R V UUR R V UU Standad Type am Followes These ae the basic type beains in am Followe seies. Models with stud diametes anin om to ae pepaed, and ae suitable o a wide ane o applications. ouble ex ole am Followes The sockets with hexaon hole on both stud ends allow mountin with a hexaon wench om eithe side. Solid Eccentic Type am Followes The stud o these beains is eccentic to the cente axis o the. Thus, the position o the in the adial diection in elation to the matin cam uide suace can easily be adjusted by tunin the stud, and the load distibution on a numbe o cam ollowe s used on the same cam uide suace can be made uniom. These ae eccentic cam ollowes with a one-piece stud that can be mounted in the same mountin holes as those o Standad Type am Followes. Eccenticity is... Eccentic Type am Followes n these beains, an eccentic colla is assembled with the am Followe stud, enablin the to be positioned easily in the adial diection aainst the matin cam uide suace. Eccenticity is... Thust isk Type am Followes These beains have special esin thust disk washes supeio in wea and heat esistance between the slidin contact aea o shouldes, stud head and side plate. These disk washes educe iction and wea due to axial loads caused by misalinment, etc. entalized Lubication Type am Followes These beains have one o two pipe-theaded holes in the stud. Thus, this seies is suitable when centalized lubication is equied. Lubication method o ex ead am Followes TypesStandad Type, ouble ex ole Type, Solid Eccentic Type, Eccentic Type, Thust isk Type, Easy Type, ylindical Rolle Type. dia. Re-easin ittin is incopoated in the stud head. Remak : All Easy Type have a way pot. All ouble ex ole Type have a way pot. Easy Type am Followes These beains have a stepped tapeed potion on the stud. When mountin the am Followe, it is easy to ix its location by a set scew to the stepped potion. Thus, this type is suitable when a lae numbe o am Followes ae used in a machine such as a pallet chane. am Followe Takin ove the basic peomance o Standad Type am Followe, this cam ollowe ealizes a easonable pice. As ease is pe-packed, the unit may be used iht ate unpackin. -Lube am Followes These beains ae lubicated with a newly developed themosettin solid-type lubicant which ills the inne space o the beain. This lubicant povides lon-tem maintenance ee. Miniatue Type am Followes These ae compactly desined beains, incopoatin vey thin needle olles in an with a small outside diamete. They ae used in electonic devices, OA equipment, small index devices, etc. ylindical Rolle am Followes These beains ae ull complement type beains incopoatin double ows o ull complement cylindical olles in the, and can withstand lae adial loads and some axial loads. nch seies am Followes Two types, R and R, ae available in the nch seies am Followes. lack oxide ilm teatment is made on R models. dia. ease nipple is incopoated in the stud head. =.k=.lbs. =.7inch

3 ntenal Stuctues and Shapes The am Followe seies includes vaious types, such as the caed type, ull complement type, shield type, sealed type, type with cowned, type with cylindical, type with hexaon hole, type with scewdive slot, etc. dentiication numbe Some examples o the identiication numbe o am Followes ae shown below. Fo applicable mateial symbol, olle uide method, seal stuctue and shape o outside suace, ee table o each seies. Examples o identiication numbe Rolle uide method am Followes include the caed type and the ull complement type. The caed type has a small coeicient o iction and is suitable o hih speed otations, while the ull complement type is suitable o heavy loads at low speed otations. With cae Full complement Example Example F F W V UU R R Example F W UU R /S Example FS F V P Seal stuctue am Followes include the shield type and the sealed type. n the shield type, the naow cleaances between the and the stud lane and between the and the side plate om labyinths. The sealed type incopoates seals in the naow cleaances to pevent the penetation o oein paticles. Shield type Sealed type Model code F FKR FES FE FW F-RU F-FU F-SFU F Standad Type am Followe ouble ex ole am Followe Solid Eccentic Type am Followe Eccentic Type am Followe Thust isk Type am Followe entalized Lubication Type am Followe (With cowned ) entalized Lubication Type am Followe (With cylindical ) Easy Type am Followe am Followe FW/S -Lube am Followe FS Miniatue Type am Followe FSW Thust isk Type Miniatue am Followe Shape o outside suace The outside suace o the o am Followes, which makes diect contact with the matin cam uide suace, is eithe cowned o cylindical. The cowned s ae eective in modeatin the ede load due to mountin eos. The cylindical s have a lae contact aea with the matin cam uide suace, and ae suitable o applications in which the applied load is lae o the cam uide suace hadness is low. owned ylindical R UF R R R R Size The value indicates a stud diamete. (unit: ) Fo ouble ex ole am Followes, the outside diamete o the oute in is indicated. n the inch seies, the outside diamete o the outein in units o / inch is indicated. ylindical Rolle am Followe nch seies am Followe(With exaon socket) nch seies am Followe(With Scew diveslot) nch seies am Followe(With exaon socket) nch seies am Followe(With Scew diveslot) Mateial o symbol ih cabon steel made F Stainless steel made Rolle uide method o symbol V With cae type Full complement type Seal stuctue o symbol UU Shield type Sealed type Shape o outside suace R o symbol With cowned With cylindical lassiication symbol o symbol lass P lass Applicable to P lass Miniatue FS P lass seies

4 Accuacy The accuacy o am Followes is shown in Table, Table., Table. and Table.. am Followes with special accuacy ae also available. When they ae equied, please contact. leaance The adial intenal cleaances o am Followes ae shown in Table. Table Radial intenal cleaance dentiication numbe unit: m Radial intenal cleaance Table Toleances imensions and symbols Outside dia. o dia. d Width o Seies ote Also applicable to the am Followe, -Lube am Followe and ylindical Rolle am Followe. ote Also applicable to the am Followe. - Metic F seies owned ylindical h7 h - Miniatue FS seies See Table. See Table. - - nch seies owned ylindical - Table. Toleances and allowable values o s (Metic F seies cylindical s( )) ominal outside dia. o mp Sinle plane mean outside dia. deviation Ove ncl. ih Low V sp Outside dia. vaiation in a sinle adial plane (Max.) Table. Toleances and allowable values o s (Miniatue FS seies) lass mp Sinle plane mean outside dia. deviation ih Low ih Low ih Low ih Low V mp Mean outside dia. vaiation (Max.) 7 unit: m See Table. K ea Radial unout o assembled beain (Max.) unit: m K ea Radial unout o assembled beain (Max.) lass lass lass lass lass lass lass Table. Toleances and allowable values o s (nch seies cylindical ) ominal outside dia. o Ove ncl. ih Low mp Sinle plane mean outside dia. deviation - V sp Outside dia. vaiation in a sinle adial plane (Max.) V mp Mean outside dia. vaiation (Max.) 7 unit: m unit: m K ea Radial unout o assembled beain (Max.) Metic F seies ote Also applicable to ull complement type, cowned and sealed type. Only epesentative types ae shown in the table, but this table is applicable to the entie Standad Type am Followe, am Followe and -Lube am Followe. Only epesentative types ae shown in the table, but this table is applicable to the entie Miniatue FS seies. Fit Tables and show ecoended toleances o mountin holes o am Followe studs. Since the am Followe is suppoted in a cantileve position, the mountin hole diamete should be pepaed without play between the stud and the hole especially when heavy shock loads ae applied. Table imensional toleances o mountin hole ominal outside dia. o stud Table Recoended it Metic F seies Type Miniatue FS seies ylindical Rolle am Followes nch seies F7 7 Toleance class o mountin hole o stud Ove ncl. Ove ncl. Ove ncl. Ove ncl. Miniatue ylindical Rolle am Followes FS seies UF nch seies Max. F F FS. FS R R -R -R 7 F FS RR-R-R F F- FKRFKR FF- FKRFKR FF- FKRFKR RRRR RRRR RRR R UF RUF R UF-RUF-R F7 unit: m 7 =.k=.lbs. =.7inch

5 Allowable Static Load The applicable load on am Followes is, in some cases, limited by the bendin stenth and shea stenth o the stud and the stenth o the instead o the o the needle olle beain. Theeoe, the imum allowable that is limited by these stenths is speciied. Table 7. Tack load capacity Type o beain Metic F seies Miniatue FS seies F R F R F R F R F R F R dentiication numbe with cowned F-R F RFKRR F-RFKRR F RFKRR F RFKRR F RFKRR F-RFKR7R F RFKRR F-RFKR7R F RFKRR F-RFKRR F-RFKRR Tack apacity Tack capacity is deined as the load which can be continuously applied on a am Followe placed on a steel cam uide suace without causin deomation o indentation on the cam uide suace when the oute in o the am Followe makes contact with the matin cam uide suace (plane). The tack capacities shown in Tables 7. and 7. ae applicable when the hadness o the matin cam uide suace is R (Tensile stenth / ). When the hadness o the matin cam uide suace dies om R, the tack capacity is obtained by multiplyin the value by the tack capacity acto shown in Table. lubication between the and the matin cam uide suace is insuicient, seizue and/o wea may occu dependin on the application. Theeoe, attention must be paid to lubication and suace ouhness o the matin cam uide especially o hih-speed otations such as cam mechanisms. Fo lubication between the and the matin cam uide suace, -Lube Unit o am Followes is ecoended. (See pae.) Tack capacity otes Only epesentative types ae shown in the table, but this table is applicable to the entie Standad Type am Followe seies. Also applicable to am Followe, -Lube am Followe and ylindical Rolle am Followe. Only epesentative types ae shown in the table, but this table is applicable to the entie Miniatue FS seies dentiication numbe with cylindical F F F F F F F- F FKR F-FKR F FKR F FKR F FKR F-FKR7 F FKR F-FKR7 F FKR F-FKR F-FKR FS. FS FS. FS FS FS FS Tack capacity unit: Table 7. Tack capacity Type o beain nch seies dentiication numbe with cowned R R R -R R R R-R R R R R R R R R R R R R R R R R R R R R R R R R Tack capacity dentiication numbe with cylindical R R - R R- R R R R R R R R R R R R R Tack capacity dentiication numbe with cowned R -R R R R-R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R Tack capacity otes Only epesentative types ae shown in the table, but this table is applicable to the entie nch seies. Table Tack capacity acto adness R Tensile stenth / 7 7 Tack capacity acto With cowned With cylindical dentiication numbe with cylindical R - R R- R R R R R R R R R R R R R R R R R R R =.k=.lbs. =.7inch Tack capacity unit:

6 Allowable Rotational Speed The allowable otational speed o am Followes is aected by mountin and opeatin conditions. Fo eeence, Table shows d n values when only pue adial loads ae applied. onsidein that axial loads also act unde actual opeatin conditions, the ecoended d n value is / o the value shown in the table. n case o -Lube am Followe, d n value is o less. Table d n values o am Followes Type aed type Full complement type Lubicant ylindical Rolle am Followe ease ote d n value d n whee, d diamete n Rotational speedpm Table eains with pepacked ease Seies Size o stud diamete d Standad Type am Followes seies am Followe F -Lube am Followes F W/S( ) Miniatue FS FS seies FSW ylindical Rolle am Followes UF nch seies F FKR FES FE FW F-RUF-FU F-SFU R R Oil 7 Lubication ease-pepacked am Followes ae shown in Table. The lubicatin ease pepacked in these beains is ALVAA REASE S (SOWA SELL SEKYU K.K.). Fo am Followes without pepacked ease, ease should be packed thouh the oil hole in the stud o use. they ae used without ease, wea o ollin contact suaces may take place, leadin to a shot beain lie. tem With cae Shield type Sealed type Full complement With hexaon hole With scewdive slot With hexaon hole With scewdive slot otes Fo Eccentic Type am Followes (FE), thead diamete as shown in the table is applicable. -Lube, a themosettin solid-type lubicant, ills the inne space o the beain. Pepackedot pepacked Oil ole The position o oil hole is shown in Table. Peom easin quietly by ittin a lubication nozzle indicated in Table to a staiht type ease un in JS and pessin the nozzle aainst the ease nipple o e-easin ittin. ue to thei stuctues, lubication is not possible o F/F, -Lube am Followe, am Followe and Miniatue FS seies. Table Position o oil hole Seies Size o stud diamete d Standad Type am Followes seies F FKR FES FE FW With hexaon hole F-RUF-FU( ) F-SFU With hexaon hole Oil hole position d d d d d d d am Followe F -Lube am Followes F W /S Miniatue FS FS seies FSW ylindical Rolle d UF With hexaon hole am Followes d d With hexaon hole.. d R d. ead outside suace end Oil hole is pepaed. ( ) ( ) With scewdive slot. d nch seies d With hexaon hole 7. 7.d R d With scewdive slot 7. 7.d otes n case o Eccentic Type am Followes (FE), thead diamete shown in the table o s is applicable in place o stud dia. and the oil hole on the oute suace o the stud cannot be used o lubication. Re-lubication can be made om the e-easin ittin that is inseted into the hexaon hole. See pae. ease nipple is incopoated in the hexaon hole. Re-easin can be made om the stud head and the stud end by pess ittin a supplied ease nipple into the stud end. See pae. Tapped holes o oil connectos ae povided at the stud end and hole o the head. Re-easin can be made om the ease nipple in the hexaon hole. ( ) ( ) ( ) ( ) =.k=.lbs. =.7inch

7 Table Type and imension o Lubication ozzles Type imension Width acoss lats Width acoss lats A-T A-R -R A-V A-V -V. R. R. 7 Width acoss lats Width acoss lats Width acoss lats Width acoss lats Width acoss lats PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats PT/ Width acoss lats Applicable ease nipple and e-ease ittin PF- PF- Re-ease ittin PF- PF- PT- PT- P P P- P Accessoies am Followe accessoies ae shown in Table. ease nipple s ae shown in Table and Table. imensions o plu o unused oil hole and s o plu insete ae shown in Table. Table Accessoies Accessoies Seies ease nipple Plu ut Spin washe Size o stud dia.d Standad Type am Followe Eccentic Type am Followe Solid Eccentic Type am Followe Thust isk Type am Followe -Lube am Followe Miniatue Type am Followe Thust isk Type Miniatue am Followe F FKR FE FES F W entalized Lubication Type am Followe F RUF FU Easy Type am Followe F SFU am Followe ylindical Rolle am Followe (With exaon socket) nch seies am Followe (With exaon socket) nch seies am Followe nch seies am Followe (With exaon socket) nch seies am Followe F F W /S FS FS W UF R R (With Scew diveslot) R R (With Scew diveslot) d d d d.d.d d. d 7. d d d d ote Fo Eccentic Type am Followe FE, thead diamete is applied. Remak: The standad ease nipple (bass) is included in the Stainless Steel Made am Followe. We also have the stainless steel ease nipple. Please contact and equest the poduct. Attached PT/ Table imensions o ease nipple o Standad Type am Followes L Width acoss lats Width acoss lats W -V d PT/ ote SP-(Yamada opoation)can be used o them. Remak The above nozzles can be atached on the standad ease un shown below. equied, please consult to with type o lubication nozzle. ody o ease un imensions o ease nipple diamete d dentiication numbe d L W PF-. PF- 7 otes Applicable to am Followes othe than nch seies am Followes. Fo Eccentic Type am Followes, thead diamete as shown in the table is applicable. Remak The same ease nipple as the accessoy is inteated in the hexaon hole on the head. Lubication ozzle =.k=.lbs. =.7inch

8 Table imensions o ease nipple o nch seies am Followes dentiication numbe P P P- P ote Shows epesentative types. imensions d L L W Special Speciication... Table imensions o plu o nch seies am Followes The ease nipple supplied with Metic seies am Followe with hexaon socket as an accessoy may be eplaced with the PT type ease nipple indicated in Table 7 upon you equest. equied, please ode with supplemental code, "/P" at the end o identiication numbe. Example o dentiication umbe F UU P Table 7 imension o PT type ease nipple Applicable am Followes R R-R- R R RR R R RR R RR R dentiication imensions o plu imension o insete numbe t d. Applicable beains USF.... R R- USF RRR R USF.... RRR Table imension o assembled PT type ease nipple ode numbe PT- PT- nsete imension Size o stud dia. d ote Fo Eccentic Type am Followe FE, thead diamete is applied. Opeatin Tempeatue Rane The opeatin tempeatue ane o am Followes is - +. Please pay attention as the types shown in table have dieent ane. Table Resticted Opeatin Tempeatue Rane Type Size o stud dia. d Miniatue Type am Followes FS Thust isk Type Miniatue am Followes FS W Standad Type am Followes Thust isk Type am Followes F F W Stainless Steel Standad Type am Followes F F Stainless Steel Thust isk Type am Followes F FW -Lube am Followes F W /S Type d With cae Shield type Sealed type d d d d Make the cente axis o the mountin hole pependicula to the movin diection o the am Followe and match the side shoulde accuately with the seatin suace indicated by in the table o s. (See Fi..) Then, ix the am Followe with the nut. o not hit the lane head o the am Followe diectly with a hae, etc. This may lead to a beain ailue such as ieula otation o cackin. Fi. Seatin suace otes deee in continuous opeation. deee o lowe is ecoended in lon time. The mak on the lane head o the stud indicates the position o the oil hole on the aceway. Avoid locatin the oil hole within the loadin zone. This may lead to a shot beain lie. (See Fi..) The hole located in the middle pat o the stud pependicula to the stud cente axis is used o easin o lockin. Oil ole imension o ease nipple ode numbe d L L W PT- PT- Size o stud dia. d ote Fo Eccentic Type am Followe FE, thead diamete is applied. Load Fi. Oil hole position and loadin diection When the nut, the toque should not exceed the values shown in the table o s. the toque is too lae, it is possible that the theaded potion o the stud will be boken. When thee is a possibility o loosenin, a special nut such as a lock nut, spin washe, o sel-lockin nut should be used. =.k=.lbs. =.7inch

9 Solid Eccentic Type am Followes and Eccentic Type am Followes, ae mounted in Eccentic callo is available o nch seies am Followes. eeence position whee mak on the head o am Followes with Eccentic collas, RE ae also stud is located as Fi.. The position can be adjusted appopiately by tunin the stud with a available. equied, please consult with. scewdive o hexaon ba wench usin the scewdive slot o hexaon hole o the stud head. Table Eccentic collas o nch seies am Followes The stud is ixed with a nut and a spin washe, etc. The toque should not exceed the values o imum toque shown in the table o s. When shock loads ae applied and the adjusted eccenticity has to be ensued, it is ecoended to make holes in the housin, stud and eccentic colla, and ix the stud with a dowel pin as shown in Fi.. oweve, when the stud diamete is less unit: than (Eccentic colla diamete ), it is dentiical Oute diamete Lenth Eccenti Applicable diicult to make a hole in the stud because the stud numbe o colla o colla city dia. o colla is thouh-hadened. de d am Followes E. ( ). ( ).. R R -(V)()(UU)(R) Eccenticity E. ( ). ( ).. ( R ) R-(V)()(UU)(R) dia. E.7 ( ).7 ( ).. ( R ) R (V)()(UU)(R) E.7 ( ).7 ( ).7. ( 7 R ) R (V)()(UU)(R) E ( R ) R (V)()(UU)(R) E. ( 7 ). ( 7 ).7.7 ( R ) R (V)()(UU)(R) Load E. ( ). ( ).7. ( R ) Fi. Reeence position o adjustin o Solid R (V)()(UU)(R) Eccentic Type am Followes and E...7. ( 7 R ) Eccentic Type am Follwes R (V)()(UU)(R) E. ( ). ( )..7 ( ) R VUU owel pin Fi. example o Solid Eccentic Type am Followe n case o Eccentic Type am Followes (FE), the lenth o the mountin hole should be moe than. lone than the (Eccentic colla width) shown in the table o s. (See Fi..) 7 Fo mountin Easy Type am Followes, it is ecoended to ix the ixin scew om the uppe side to the stepped potion o the stud. (See Fi..) Fi. example o Easy Type am Followe Pecaution Fo Use o not wash -Lube am Followe with oanic solvent and/o white keosene, which have the ability o emovin at no leave them in contact with the above aents. Option Pats -Lube Unit o am Followes Stuctue and eatues -Lube unit o am Followe is a lubication pat to be mounted on the am Followe and its inteal capillay lubicatin element has a lot o lubication oil impenated in it. The capillay lubicatin element is consecutive poous esin omed by sinte moldin o ine esin powde and a lot o lubication oil is impenated in it by usin the capillay action that occus within the intenal space. Stuctue o -Lube Unit o am Followes -Lube unit -Lube -Lube am Followe dentiication numbe The identiication numbe example o Unit is shown below. Model code Size o L (Size o combined am Followe) unit : -Lube Reula lubication is not needed as lubication oil is supplied onto the outside diamete suace o the and matin uide suace (cam uide suace). The ease is not scatteed and contamination o the suoundin envionment is pevented. The combination with -Lube cam ollowe (See Pae 7) ealizes maintenance-ee cam ollowe inside and cam uide suace. Maniied photos o -Lube eoe impenatin oil Fusion- bonded Resin paticles ae stonly usion bonded. Ate impenatin oil Resin pat Lubicant pat Lubicant is etained in cavities amonst esin paticles. Allowable otation speed The otation speed o am Followe with -Lube Unit should not exceeded d n=, o eeence. d nd n d : diamete o am Followe, n: Rotational speed, pm Minimum otational anle Lubicatin oil is supplied to the whole extenal diamete suace o the. Accodinly, use the poduct in a condition in which the makes one o moe tuns. Opeatin tempeatue Allowable opeatin tempeatue ane o Followe with -Lube Unit is - to. am Fi. Lenth o the mountin hole o Eccentic Type am Followe To ensue nomal otation o the -Lube am Followe, apply a load o % o ove o the dynamic at use. 7 =.k=.lbs. =.7inch

10 Pecaution o use Set the -Lube Unit pependiculaly to the cente o not wash with oanic solvent and/o white axis o am Followe and ix toethe with am keosene, which have the ability o emovin at no Followe by nut. leave them in contact with the above aents. Table imensions o -Lube Unit o am Followes o not apply a load onto the -Lube Unit diectly. Fi. 7 o -Lube Unit Position o -Lube Unit is adjustable. -Lube Unit must be positioned avoidin loadin diection. To ensue nomal otation o the am Followe, apply a load o % o ove o the dynamic load atin at use. Also, the needs to be otate ove a evolution to supply lubicant on entie oute diamete suace. The imum allowable load on am Followe with -Lube Unit is, % o the imum allowable load o the needle beain. -Lube Unit may be damaed and inluenced to the smooth oatation and lubicatin peomance by excessive load. Model numbe L L.. ounday imensions W T t Model numbe F F Applicable am Followes ounday imensions. Load Fi. Load diection o am Follwe When the nut, the toque should not be exceeded the value imum toque on table. n case loosenin o the nut is pedicted due to vibation, usin lock nut, spin washe and othe special washe ae ecoended. Ate assemlin -Lube Unit and am Followes in the machine, please conim that -Lube unit povides oil coectly to the cam uide suace beoe actual opeation. o not use in the envionment which contamination o liquid and/o hamul oein matte ae expected. 7 Replace with new -Lube Unit when inside oil inishes completely. Re-lubication is not possible. L L L - L L - L L L L ote Only epesentative types ae shown in the table, but this table is applicable to the same size o Standad Type am Followes, ouble ex ole am Followes, am Followe, Thust isk Type am Followes, entalized Lubication Type am Followes, -Lube am Followes and ylindical Rolle am Followes. Remak Load on the am Followe with the -Lube unit equipped must be up to % o the imum allowable o the am Followe to be combined. Fo the imum allowed o each am Followe, please see the tables o espective models.... F F F - F FKR F - FKR F FKR F FKR F FKR F - FKR =.k=.lbs. =.7inch

11 AM FOLLOWERS Standad Type am Followes With ae/with exaon ole d d R= R= dia. dia. Shield type With cowned With cylindical F F F F R R R R F R F RM F - R F - RM F R F - R F F R R F R F - R F R F - R F F F F dentiication numbe F F F F With cowned UUR UUR UUR UUR F F UUR F M F UURM F - F - M F - UUR F - UURM With cylindical F R F F UUR F UU F RM F M F UURM F UUM F R F - R F - R F F - F F F F - F F - F F - F - F UUR F - UUR F F UUR UUR F UUR F - UUR F UUR F - UUR Sealed type F UUR F - UUR F - UUR F R dia d- F F F F F UU F UUM F - UU F - UUM F UU F - UU F F UU UU UU UU UU UU F UU F - UU F UU F - UU F UU F - UU F - UU (Re.) F R dia d- M. M.7 M. M M. M M. M M. M M. M. M. M. M. M. M. M. M. M. M F F UUR F UU ounday s d s min toque -m asic dynamic asic static 7 7 allowable ote( ) Minimum allowable value o chame Remaks.Models with a stud diamete d o o less have no oil hole. Fo models with a stud dia. to, oil hole (e-easin ittin) is povided at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole each on the outside suace and end suace o the stud..shield type models with a stud diamete d o o less and the sealed type models ae povided with pepacked ease. Othe models ae not povided with pepacked ease. Peom pope lubication o use. =.k=.lbs. =.7inch

12 AM FOLLOWERS Standad Type am Followes Full omplement Type/With exaon ole d d R= R= dia. dia. Shield type With cowned With cylindical F VR F VR F VRM F - VR F - VRM F VR F - VR F F VR VR F VR F - VR F VR F - VR F VR F - VR F - VR F V dentiication numbe F With cowned VUUR F VUUR F F VUURM F F - VUUR F - VUURM F VUUR F - VUUR F F VUUR VUUR F VUUR F - VUUR F VUUR F - VUUR With cylindical F VUU F VR F V F VUUR F VUU F VRM F VM F VUURM F VUUM F V F VM F - V F - VM F V F - V F V F V F V F - V F V F - V F V F - V F - V F VR dia. d- Sealed type VUU VUUM F - VUU F - VUUM F VUU F - VUU F F VUU VUU F VUU F - VUU F VUU F - VUU F VUUR F VUU F - VUUR F - VUUR F - VUU F - VUU F VR dia. d- (Re.) d ounday s M M. M M. M M. M M. M s min M M..... M. M. M. M. M. M. M. F V F VUUR F VUU toque -m asic dynamic asic static allowable 7 7 ote( ) Minimum allowable value o chame Remaks. Models with a stud diamete d o o less have an oil hole (e-easin ittin) at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole each on the outside suace and end suace o the stud.. Povided with pepacked ease. =.k=.lbs. =.7inch

13 AM FOLLOWERS Standad Type am Followes / Stainless Steel Made With ae/with exaon ole d d R= R= dia. dia. Shield type With cowned With cylindical dentiication numbe F FR F F F FUUR F F FR dia. d- Sealed type With cowned With cylindical F FR F F F FUUR F FUU F FR F F F FUUR F FUU (Re.) F FR F F F FUUR F FUU. F FR F F F FUUR F FUR F FR F F F FUUR F FUR. 7.. F FR F F F FUUR F FUR. F FR F F F FUUR F FUR F - FR F - F F - FUUR F - FUR F FR F F F FUUR F FUR F - FR F - F F - FUUR F - FUR FUR 7 F FR F F F FUUR F FUR F - FR F - F F - FUUR F - FUR 7 7 F FR dia. d- M. M.7 M. M 7. M. M. M. M. 7 M. M ounday s F F F FUUR F FUU d s min toque -m asic dynamic asic static allowable ote( ) Minimum allowable value o chame Remaks. Models with a stud diamete d o o less have no oil hole. Fo models with a stud dia. to, oil hole (e-easin ittin) is povided at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole each on the outside suace and end suace o the stud.. Shield type models with a stud diamete d o o less and the sealed type models ae povided with pepacked ease. Othe models ae not povided with pepacked ease. Peom pope lubication o use. =.k=.lbs. =.7inch

14 AM FOLLOWERS AM FOLLOWERS ouble ex ole am Followes With ae d R R= dia. FKR R FKR FKR UUR FKR UU diamete Shield type dentiication numbe Sealed type (Re.) owned ylindical owned ylindical FKRR FKRR FKR FKR FKRUUR FKRUU FKRUUR FKRUU d ounday s ( ) s min toque -m asic dynamic asic atin allowable M FKRR FKR FKRUUR FKRUU M FKRR FKR FKRUUR FKRUU M FKR7R FKRR FKRR FKR7R FKRR FKRR FKRR FKR7 FKR FKR FKR7 FKR FKR FKR FKR7UUR FKR7UU FKRUUR FKRUU FKRUUR FKRUU FKR7UUR FKR7UU FKRUUR FKRUUR FKRUUR FKRUU FKRUU FKRUU M M..... M. 7 ote( )Minimum allowable value o chame. Remak Shield type models ae not povided with pepacked ease. Peom pope lubication o use. 7 =.k=.lbs. =.7inch

15 d AM FOLLOWERS AM FOLLOWERS ouble ex ole am Followes Full omplement Type R R= dia. FKR VR FKR V FKR VUUR FKR VUU diamete Shield type dentiication numbe Sealed type (Re.) owned ylindical owned ylindical FKRVR FKRVR FKRV FKRV FKRVUUR FKRVUU FKRVUUR FKRVUU d ounday s ( ) s min toque -m asic dynamic asic atin allowable M FKRVR FKRV FKRVUUR FKRVUU M FKRVR FKRV FKRVUUR FKRVUU M FKR7VR FKRVR FKRVR FKR7VR FKRVR FKRVR FKRVR FKR7V FKRV FKRV FKR7V FKRV FKRV FKRV FKR7VUUR FKR7VUU FKRVUUR FKRVUU FKRVUUR FKRVUU FKR7VUUR FKR7VUU FKRVUUR FKRVUUR FKRVUUR FKRVUU FKRVUU FKRVUU 7 7 M M..... M ote( )Minimum allowable value o chame. Remak Povided with pepacked ease. =.k=.lbs. =.7inch

16 AM FOLLOWERS Solid Eccentic Type am Followes With ae/with exaon ole Eccenticity Eccenticity d d R= R= dia. FES R dia. d- FES R FES FES UU dia. d- dia. Shield type With cowned With cylindical dentiication numbe With cowned Sealed type With cylindical FES R FES FES UUR FES UU FES R FES FES UUR FES UU FES R FES FES UUR FES UU FES - R FES - FES - UUR FES - UU FES R FES FES UUR FES UU FES - R FES - FES - UUR FES - UU (Re.).. FES R FES FES UUR FES UU 7 FES R FES FES UUR FES UU d M.. M... M. M. M. M. ounday s s min M M Eccenticity..... toque -m asic dynamic 7 7 asic static 7 allowable 7 ote( ) Minimum allowable value o chame Remaks. Models with a stud diamete d o o less have an oil hole (e-easin ittin) at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole each on the outside suace and end suace o the stud.. Shield type models with a stud diamete d o o less and the sealed type models ae povided with pepacked ease. Othe models ae not povided with pepacked ease. Peom pope lubication o use. =.k=.lbs. =.7inch

17 AM FOLLOWERS Eccentic Type am Followes With ae/with exaon ole Eccenticity de de Eccenticity R= R= Outside diamete o eccentic colla Outside diamete o eccentic colla 7 Shield type With cowned With cylindical FE R FE R FE R FE - R FE R FE - R FE R FE R FE R FE - R FE R FE - R FE R FE - R FE - R FE FE FE FE - FE FE - FE FE FE FE - FE FE - FE FE - FE - dentiication numbe FE FE With cowned UUR UUR FE UUR FE - UUR FE UUR FE - UUR FE FE Sealed type UUR UUR FE UUR FE - UUR FE UUR FE - UUR With cylindical FE FE UU UU FE UU FE - UU FE UU FE - UU FE FE UU UU FE UU FE - UU FE UU FE - UU FE UUR FE UU FE - UUR FE - UUR FE - UU FE - UU FE R Outside diamete o eccentic colla de- (Re.).. d e M ounday s M.. M.. s min 7.. M... M. M M M M. M. M. M. M. M. M. FE R Outside diamete o eccentic colla de FE Eccenticity FE UU toque -m asic dynamic asic static 7 allowable ote( ) Minimum allowable value o chame Remaks. Models with a thead diamete o o less have an oil hole (e-easin ittin) at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole on the end suace o the stud.. Shield type models with a stud thead diamete o o less and the sealed type models ae povided with pepacked ease. Othe models ae not povided with pepacked ease. Peom pope lubication o use. =.k=.lbs. =.7inch

18 AM FOLLOWERS Eccentic Type am Followes Full omplement Type/With exaon ole Eccenticity de Eccenticity de R= R= Outside diamete o eccentic colla FE VR Outside diamete o eccentic colla de- FE VR FE V Outside diamete o eccentic colla de- FE VUU Outside diamete o eccentic colla Shield type With cowned With cylindical FE VR FE - VR FE - VR dentiication numbe With cowned With cylindical FE VR FE V FE VUUR FE VUU FE VR FE V FE VUUR FE VUU FE VR FE V FE VUUR FE VUU FE - VR FE - V FE - VUUR FE - VUU FE VR FE V FE VUUR FE VUU FE - VR FE - V FE - VUUR FE - VUU FE VR FE V FE VUUR FE VUU FE VR FE V FE VUUR FE VUU FE VR FE V FE VUUR FE VUU 7 FE - VR FE - V FE - VUUR FE - VUU FE VR FE V FE VUUR FE VUU FE - VR FE - V FE - VUUR FE - VUU FE V FE - V FE - V Sealed type FE FE - VUUR FE - VUUR VUUR FE VUU FE - VUU FE - VUU (Re.). 7 7 d e M ounday s s min 7.. M... M. M. M. M M M M. M. M. M. M. M. M Eccenticity toque -m asic dynamic asic static allowable ote( ) Minimum allowable value o chame Remaks. Models with a thead diamete o o less have an oil hole (e-easin ittin) at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole on the end suace o the stud.. Povided with pepacked ease. =.k=.lbs. =.7inch

19 AM FOLLOWERS Thust isk Type am Followes With ae/with exaon ole d d R R= dia. FWR dia. d- FWR dia. d- FWUUR dia. Shield type dentiication numbe Sealed type (Re.) ounday s d toque -m asic dynamic asic static allowable F WR F WUUR. 7 M. F WR F WUUR 7. M.7 F WR F WUUR. M F WR F WUUR. M....7 F WR F WUUR F WR F - WR F WR F - WR F WUUR F - WUUR F WUUR F - WUUR. M. M. M. M. M F WR F WUUR 7 M F WR F WUUR M F WR F - WR F WUUR F - WUUR 7 M. M Remaks. Models with a stud diamete d o o less have no oil hole. Fo Models with a stud dia. to, oil hole (e-easin ittin) is povided at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole each on the outside suace and end suace o the stud.. Shield type models with a stud diamete d o o less and the sealed type models ae povided with pepacked ease. Othe models ae not povided with pepacked ease. Peom pope lubication o use. 7 =.k=.lbs. =.7inch

20 AM FOLLOWERS Thust isk Type am Followes / Stainless Steel Made With ae/with exaon ole dia. F FWR F FWUUR dia. Shield type dentiication numbe Sealed type (Re.) ounday s d toque -m asic dynamic asic static allowable F FWR F FWUUR. 7 M F FWR F FWUUR 7. M F FWR F FWUUR. M Remaks. Models with a stud diamete d o o less have no oil hole. Fo Models with a stud dia., oil hole (e-easin ittin) is povided at the head.. Povided with pepacked ease. =.k=.lbs. =.7inch

21 AM FOLLOWERS entalized Lubication Type am Followes With ae/with Scewdive Slot dia. F-RU F-FU dia. With cowned dentiication numbe With cylindical F-RU- F-FU- F-RU- F-FU- F-RU- F-RU-- F-RU- F-RU-- F-FU- F-FU-- F-FU- F-FU-- (Re.).. ounday s 7 M M. M. M. M. M. F-RU- F-FU- 7 M. 7 F-RU- F-FU- F-RU- F-RU-- F-RU- F-RU-- F-RU- F-RU-- F-RU-- F-FU- F-FU-- F-FU- F-FU-- F-FU- F-FU-- F-FU-- 7 d 7 M. M. M. M. M. M. M. M. M M s min M PT PT toque -m asic dynamic 7 7 asic static allowable ote( ) Minimum allowable value o chame Remaks. Models with a stud diamete d o o less ae povided with a lubication tapped hole on the stud head only. Othe models ae povided with one lubication tapped hole each on the head and end suace o the stud.. Povided with pepacked ease. =.k=.lbs. =.7inch

22 AM FOLLOWERS Easy Type am Followes With ae/with exaon ole e L L L L d e h t d dia. F-SFU dia. d- F-SFU dia. d- dia. dentiication numbe F-SFU- F-SFU- (Re.). ounday s F-SFU-.... F-SFU- F-SFU- F-SFU-- F-SFU- F-SFU-- F-SFU- F-SFU-- d L L e s Toleance. t h (Re.) s min asic dynamic 7 7 asic static 7 allowable ote( ) Minimum allowable value o chame Remaks. Models with a stud diamete d o o less have an oil hole (e-easin ittin) at the head. Othe models ae povided with an oil hole (ease nipple) at the head.. Povided with pepacked ease. =.k=.lbs. =.7inch

23 AM FOLLOWERS am Followe With ae/with exaon ole d dia. F dia. dentiication numbe F F F F - F F - F F F F - (Re.) ounday s d M M. M. M. M. M. M. M. M. M ( ) s min toque -m asic dynamic asic static 7 allowable static load ote( ) Minimum allowable value o chame. Remaks. This beain cannot be e-lubicated due to its stuctue. e-lubication is necessay, please use Followes. Remaks. Povided with pepacked ease. Standad Type am =.k=.lbs. =.7inch

24 AM FOLLOWERS -Lube am Followes With ae / With exaon ole R= d dia. F W /S dia. dentiication numbe F WUUR/S (Re.). M. ounday s d 7... toque -m. asic dynamic asic static allowable F WUUR/S. M....7 F WUUR/S F WUUR/S F - WUUR/S. M. M. M F WUUR/S F - WUUR/S M. M F WUUR/S F WUUR/S F WUUR/S F - WUUR/S 7 7 M. M. M. M RemakThis beain cannot be e-lubicated as themosettin solid-type lubicant -Lube ills its inne space. 7 =.k=.lbs. =.7inch

25 AM FOLLOWERS Miniatue Type am Followes With ae/with exaon ole Full omplement Type/With exaon ole dia. FS FS V dia. dentiication numbe With cae Full complement (Re.) ounday s d toque -m asic dynamic asic static allowable FS FSV M. M FS. FS.V.. M.. M FS FSV M. M FS FS V M.7 M FS FS FS V FS V M. M. M M Remaks. o oil hole is povided.. Povided with pepacked ease. =.k=.lbs. =.7inch

26 AM FOLLOWERS Miniatue Type am Followes / Stainless Steel Made With ae/with exaon ole Full omplement Type/With exaon ole dia. FS F FS V dia. dentiication numbe With cae Full complement (Re.) ounday s d toque -cm asic dynamic asic static allowable FS F FSFV M. M FS. F FS. FV.. M.. M FS F FSFV M. M FS F FS FV M.7 M FS F FS F FS FV FS FV M. M. M M Remaks. o oil hole is povided.. Povided with pepacked ease. =.k=.lbs. =.7inch

27 AM FOLLOWERS Thust isk Type Miniatue am Followes d With ae/with exaon ole Full omplement Type/With exaon ole dia.. FS. WV FS W dia. dentiication numbe With cae Full complement (Re.) ounday s d toque -cm asic dynamic asic static allowable. FS. WV..7. M FS W... M FS. W. M FS W M FS W M FS W 7 M FS W 7 M..... Remaks. o oil hole is povided.. Povided with pepacked ease. =.k=.lbs. =.7inch

28 d AM FOLLOWERS Thust isk Type Miniatue am FollowesStainless Steel Made With ae/with exaon ole dia. FS FW dia. dentiication numbe (Re.) ounday s d FS FW... M... FS. FW. M... FS FW M.. FS FW M.7 FS FW 7 M. FS FW 7 M.... toque -cm asic dynamic asic static allowable Remaks. o oil hole is povided.. Povided with pepacked ease. =.k=.lbs. =.7inch

29 AM FOLLOWERS ylindical Rolle am Followes Full omplement Type/With exaon ole d d R= R= dia. UF R dia. d UF R dia. d- dia. dentiication numbe UF R UF - R UF R UF - R (Re.) ounday s M. M. M. M. M. M. M UF R 7 M UF R UF R UF - R UF R UF - R UF R UF - R 7 7 d 7 M. M. M. M toque -m asic dynamic asic static allowable 7 7 Remaks. Fo models with a stud diamete d o, oil hole (e-easin ittin) is povided at the head. Othe models ae povided with an oil hole (ease nipple) at the head and an oil hole each on the outside suace and end suace o the stud.. Povided with pepacked ease. 7 =.k=.lbs. =.7inch

30 d AM FOLLOWERS nch Seies am Followes With ae/with exaon ole R= R= dia... R R R R UUR R UU dia. (inch). With cowned Shield type R R R - R dentiication numbe With cylindical With cowned Sealed type With cylindical R R UUR R UU R - R - UUR R - UU. R R R R UUR R UU R - R R - R - UUR R - UU. R R R R UUR R UU R R R R UUR R UU. R R R R UUR R UU R R R R UUR R UU.7 R R R R UUR R UU R R R R UUR R UU.7 R R R R UUR R UU R R R R UUR R UU. R R R R UUR R UU R R R R UUR R UU. R R R R UUR R UU R R R R UUR R UU (Re.) o.- o d UF ounday s(inch) (inch) toque -m asic dynamic 7 asic static 7 7 Remaks. Models with a stud diamete d o. o less have no oil hole. Othe models ae povided with one oil hole each on the outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. =.k=.lbs. =.7inch

31 d AM FOLLOWERS nch Seies am Followes With ae/with Scewdive Slot R= R= dia... RR R RUUR RUU dia. (inch) With cowned Shield type R R R - R R R R - R R R R R. R R R R R R R R R R R R R R R R R R R R dentiication numbe With cylindical R R - R R - R R R R R R R R R R R R With cowned Sealed type With cylindical R UUR R UU R - UUR R - UU R UUR R UU R - UUR R - UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU R UUR R UU (Re.) o.- o d UF ounday s(inch) (inch) * * * * toque -m asic dynamic 7 asic static 7 7 Remaks. Models with a stud diamete d o. o less (maked *) ae povided with an oil hole on the stud head only. Othe models ae povided with one oil hole each on the head, outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. =.k=.lbs. =.7inch

32 AM FOLLOWERS nch Seies am Followes Full omplement Type/With exaon ole d R= R= dia... R VR R V R VUUR R VUU dia. (inch) Shield type With cowned dentiication numbe With cylindical With cowned Sealed type With cylindical R VR R V R VUUR R VUU. R - VR R -V R - VUUR R - VUU. R VR R V R VUUR R VUU R - VR R -V R - VUUR R - VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU.7 R VR R V R VUUR R VUU R VR R V R VUUR R VUU.7 R VR R V R VUUR R VUU R VR R V R VUUR R VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU (Re.) o.- o d UF ounday s(inch) (inch) toque -m asic dynamic asic static Remaks. Models with a stud diamete d o. o less have no oil hole. Othe models ae povided with one oil hole each on the outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. =.k=.lbs. =.7inch

33 AM FOLLOWERS nch Seies am Followes Full omplement Type/With Scewdive Slot d R= R= dia...7 RVR RV RVUUR RVUU dia. (inch) Shield type With cowned dentiication numbe With cylindical With cowned Sealed type With cylindical R VR R V R VUUR R VUU. R - VR R - V R - VUUR R - VUU. R VR R V R VUUR R VUU R - VR R - V R - VUUR R - VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU.7 R VR R V R VUUR R VUU R VR R V R VUUR R VUU.7 R VR R V R VUUR R VUU R VR R V R VUUR R VUU. R VR R V R VUUR R VUU R VR R V R VUUR R VUU (Re.) o.- o d R VR R VR.7 R V R V R VUUR R VUUR R VUU R VUU R VUU UF ounday s(inch) (inch) * * * * toque m asic dynamic asic static Remaks. Models with a stud diamete d o. o less (maked *) ae povided with an oil hole on the stud head only. Othe models ae povided with one oil hole each on the head, outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. =.k=.lbs. =.7inch

34 AM FOLLOWERS nch Seies eavy uty am Followes Full omplement Type/With exaon ole d R R dia... RVR RVUUR dia. (inch) dentiication numbe Shield type Sealed type With cowned With cowned. R - VR R - VUUR R VR R VUUR 7. R - VR R - VUUR R VR R VUUR. R VR R VUUR R VR R VUUR.7 R VR R VUUR R VR R VUUR. R VR R VUUR R VR R VUUR. R VR R VUUR R VR R VUUR (Re.) R VR R VUUR R VR R VUUR.7 R VR R VUUR R VR R VUUR US US R VR R VUUR R VR R VUUR R VR R VUUR R VR R VUUR R VR R VUUR... - U. R d UF VR R VUUR U ) ounday s(inch) R (inch) toque m asic dynamic asic static Remaks. Models with a stud diamete d o 7. o less have no oil hole. Othe models ae povided with one oil hole each on the outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. 7 =.k=.lbs. =.7inch

35 AM FOLLOWERS nch Seies eavy uty am Followes Full omplement Type/With exaon ole d dia... R V R VUU dia. (inch). dentiication numbe Shield type With cylindical R - V R V Sealed type With cylindical R - VUU R VUU 7. R - V R - VUU R V. R V R V.7 R V R V. R V R V. R V R V R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU. R VUU (Re.) R V R V.7 R V R V R VUU R VUU R VUU R VUU US US R V R VUU R V R VUU R V R VUU R V R VUU R V R VUU... - U R V d UF U ounday s(inch) (inch) toque m asic dynamic asic static Remaks. Models with a stud diamete d o 7. o less have no oil hole. Othe models ae povided with one oil hole each on the outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. =.k=.lbs. =.7inch 7

36 AM FOLLOWERS nch Seies eavy uty am Followes Full omplement Type/With Scewdive Slot d R R dia... RVR RVUUR dia. (inch). dentiication numbe R - VR R VR R - VUUR R VUUR 7. R - VR R - VUUR R VR. R VR R VR.7 R VR R VR. R VR R VR. R VR R VR R VUUR R VUUR R VUUR R VUUR R VUUR R VUUR R VUUR R VUUR R VUUR. Shield type With cowned R VUUR (Re.) R VR R VR.7 R VR R VR R VUUR R VUUR R VUUR R VUUR US US R VR R VUUR R VR R VUUR R VR R VUUR R VR R VUUR R VR R VUUR... - U R VR Sealed type With cowned d UF U ounday s(inch) R *.7.7 *.7.7 *.7.7 * (inch) toque -m asic dynamic asic static Remaks. Models with a stud diamete d o 7. o less (maked *) ae povided with an oil hole on the stud head only. Othe models ae povided with one oil hole each on the head, outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. 7 =.k=.lbs. =.7inch 7

37 AM FOLLOWERS nch Seies eavy uty am Followes Full omplement Type/With Scewdive Slot d dia... RV RVUU dia. (inch). 7. R - V R V. R V R V.7 R V R V. R V R V. R V R V dentiication numbe Shield type With cylindical R - V R V. R V R V.7 R V R V.7 R V R V. R V R V. R V. R V Sealed type With cylindical R - VUU R VUU R - VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R VUU R R VUU VUU (Re.) d US US UF U U ounday s(inch) (inch).7 * * * * toque -m asic dynamic asic static Remaks. Models with a stud diamete d o 7. o less (maked *) ae povided with an oil hole on the stud head only. Othe models ae povided with one oil hole each on the head, outside suace and end suace o the stud.. Povided with pepacked ease.. Fo the imum allowable, please contact. 7 =.k=.lbs. =.7inch 7

38 Sepaable Rolle Followes on-sepaable Rolle Followes ih cabon steel made Stainless steel made -Lube Rolle Followes ylindical Rolle Followes Stuctue and Featues Rolle Followes ae beains desined o oute in otation, in which needle olles ae incopoated in a thick walled. oth cowned and cylindical s ae available. The s un diectly on matin cam uide suaces, and the cowned is eective in elievin the ede load caused by mountin eos. The cylindical oute in, on the othe hand, has a lae contact aea with the matin cam uide suace and is suitable o applications involvin lae loads o low cam uide suace hadness. n Rolle Followes, thee ae two types o beains available, the caed type and the ull complement type. The caed type is useul o applications at hih-speed otation. The ull complement type, on the othe hand, is suitable o heavy-load applications at low-speed otation o oscillatin motions. Rolle Followes include sepaable and non-sepaable types. Also, in addition to the open type, shield type and sealed type ae available. The cleaances between the side plates and o the shield type ae naow, and om labyinths. n the sealed type, special synthetic ubbe seals ae assembled in these cleaances, and they ae eective in peventin penetation o dust and dit. These beains ae available in a vaiety o types to suit almost any kind o application. They ae widely used o cam mechanisms and o linea motions o conveyin equipment. Stuctues o Rolle Followes Stuctue o Sepaable Rolle Followe Oute in nne in eedle olle ae Stuctue o Sepaable Rolle Followe Oute in Side plate nne in eedle olle ae Stuctue o on-sepaable Rolle Followe Oute in Side plate nne in eedle olle Seal Stuctue o ylindical Rolle Followe Oute in Shield plate nne in Side plate ylindical olle 7 7