Hostaform C Heavy metals and their compounds. March 1 st, 2012

Transcription

1 Hostaform C GADSL (global automotive declarable substance list, 2011 GADSL Version 1.0) (content of substances is covering VDA ) see also listing in IMDS Database Please note that the manufacturer or seller of parts and articles made out of the above mentioned products have to take the full responsibility regarding applicable legal requirements. Ticona confirms that the above mentioned products by constitution do not contain the following substances: Heavy metals and their compounds Antimony Arsenic Barium Beryllium Bismuth Lead Cadmium Chromium Cobalt Copper Lithium Nickel Mercury Selenium Silver Tellurium Thallium Thorium Tin Halogenated substances - brominated compounds - chlorinated compounds - e.g. HBFC PBB PBT PBDE TBBA PCP TCB HCB HCFC PCB PCT PCN PCDE Seite 1 von 5 Hydrobromofluorocarbons Polybrominated Biphenyls Polybrominated Terphenyls Polybrominated Diphenylethers Tetrabromobisphenol A Pentachlorophenol Trichlorobenzol,(2005/59/EC) Hexachlorobenzene Hydrochlorofluorocarbons Polychlorinated Biphenyls Polychlorinated Terphenyls Polychlorinated Naphthalenes Polychlorinated Diphenylethers

2 SCCP MCCP LCCP HBCDD PVC TRIS TEPA Vinylchloride TBP TBA short chain chlorinated paraffins medium chain chlorinated paraffins long chain chlorinated paraffins Hexabromocyclododecane Polyvinylchloride Tri (2,3-dibrompropyl)-phosphat Tri-(aziridinyl)phodphinoxid 2,4,6- Tribromophenol 2,4,6- Tribromoanisole March 1 st, 2012 Softener: Phthalates, e.g. (Dir 2005/84/EG) DEHP DOP DINP DIDP DBP BBP DBP DEP DMEP DnPP DNOP DiPP DIBP Diethylhexylphthalate Di-n-octylphthalate Diisononylphthalate Diisodecylphthalate Dibutylphthalate Benzylbutylphthalate Dibutylphthalat Diethylphthalat Bis-(methoxyethyl)-phthalat Di-n-pentylphthalat Di-n-octylphthalat Diisopentylphthalat Diisobutylphthalate Other substances Seite 2 von 5 2-(2'-Hydroxy-3',5'-di-tert-butylphenyl)benzotriazole - CAS No Isopropylthioxanthone (ITX) 4-tert-Butylbenzoic acid (PTBBA); CAS-No.: ) Acetophenone Acrylonitril Acrylamines Alkylphenolethoxylates (APEO) Butylhydroxytoluol (BHT) Bisphenol-A (CAS-RN ) Bisphenol-F-diglycidylether (BFDGE) 1895/2005/EC Benzene Benzoyle peroxide Benzidin Chlorpyrifos (CAS- No.: ) Colophony, Pine rosin; CAS:

3 CMR- substances CYCLODODEKANE- CAS-No Diethylene glycol dimethacrylates Dimethylformamide (DMF, CAS-RN ) Diazinon (CAS- No.: ) Dimethyl-benzenemethanol Ethyl benzene (CAS No.: ) Fenobucarb (CAS- No.: ) Flame retardants Gluten Glycol Kalium-Dichromat Kreosot Latex Lindane Mirex (Perchlordecone) Organotin compounds (Tributyltin, Triphenyltin) Octylphenol, Nonylphenol Octylphenolethoxylates OPEO Nonylphenolethoxylates NPEO n- Tetradecane (CAS- No.: ) Nonanal (CAS-No.: ) Parabene, 4-Hydroxybenzoic acid esters p- Dichlorobenzene (1,4- Dichlorobenzene) PFOA - Perfluorooctanoic acid PFOS Perfluoroctane sulfonate PFOSA - Perfluorooctane sulphonamide and derivatives that contain any of the following groups: C 8 F 17 SO 2, C8F 17 SO 3 and C 8 F 17 SO 2 N Red Phosphorus Styrene (CAS- No.: ) Sulfur SVHC (substances of very high concern as listed in Annex XIV of REACH) PVC (Polyvinylchloride) Radioactive materials Silicones Toulene, all isomers Xylene (Dimethyl-benzene), all isomers March 1 st, 2012 Halogenated dioxins and furans With the the revised version of the chemical prohibition ordinance ( Neufassung der Chemikalien-Verbotsverordnung ) of June 13th, 2003 (recent amendment of June the 21st, 2005) the extended prohibitions and restrictions for polybrominated and polychlorinated dioxins and furans are regulated. We hereby confirm that all products as delivered by us comply with this ordinance (in the currently valid version). Seite 3 von 5

4 CONEG-Regulation and EU Directive 94/62/EC We hereby certify, that in compliance to the CONEG-Regulation as well as to the EU Directive 94/62/EC Packaging and Packaging Waste, Article 11 the total concentration of the heavy metals Lead, Cadmium, Mercury and Chromium-VI in the above mentioned products do not exceed 100 ppm by weight (100 mg / kg polymer). This certificate implies constitutionally caused concentration of heavy metals as well as ubiquitous traces. Ozone depleting substances; German regulation of the ban of halones Herewith we confirm that above mentioned products by constitution do not contain ozone depleting substances: none of the substances listed in Annex 1 of the EU-Ordinance 2000/2037/EC on ozone depleting substances are contained in the a.m. products. In addition, the a.m. products are in accordance with the German FCKW-Halon-Verbots- Verordnung (German regulation of the ban of halones) of May 6th, 1991 including its amendment of October 29th, Asbestoes compounds Asbestoes and other fibers which are able to pass into the lungs are not used in the above mentioned products. Azo dyes We hereby confirm that the above mentioned product does not contain Azo dyes with carcinogenic amine compounds. BADGE, NOGE We also confirm that bisphenol A diglycidyl ether (BADGE) and Novolac glycidyl ether (NOGE) are not used to manufacture above listed products. Phenol derivates are included in the above mentioned products like in almost all plastic materials as antioxidants. Seite 4 von 5

5 Formaldehyde Polyacetals can release Formaldehyde when manufactured. Please keep in line with the applicable occupational health and safety requirements. Usually our products are in compliance with EU Migration-Limit (EU 10/2011) for food contact applications and with VDA 275 test (emissions in cars). However, both tests have to be conducted at the end product. The presence of ubiquitous traces of undesired substances cannot be totally excluded. Ticona GmbH, Product Safety. Important: This information relates only to the above mentioned materials as delivered in their original packaging. It does not relate to any product made of these materials with or without the inclusion of further additives, such as processing aids or colorants. To the extent that any hazards may have been mentioned in this publication, we neither suggest nor guarantee that such hazards are the only ones that exist. This information should not be construed as a promise or guarantee of specific properties of the products described or their suitability for a particular application. Any existing intellectual property rights must be observed. It is the responsibility of any manufacturer of medical devices containing Ticona resins to determine the necessary steps to ensure the safe and efficacious use of their products/devices and to obtain the necessary regulatory approvals for the intended applications. Insofar as this information relates to sterilization for medical purposes, the data contained herein show the typical effects of sterilization procedures on the nominal physical properties (using standardized test specimens) of the Ticona resins. The actual sterility of the parts has not been evaluated for either single or multiple use applications. The products mentioned herein are not intended for use in medical or dental implants. Seite 5 von 5