C-MEDS: Consortium for the Molecular Engineering of Dispersant Systems. The Science and Technology of Dispersants as Relevant to Deep Sea Oil Releases

Transcription

1 C-MEDS: Consortium for the Molecular Engineering of Dispersant Systems. The Science and Technology of Dispersants as Relevant to Deep Sea Oil Releases Tulane Univ. Louisiana State Univ. Univ. Texas at Austin Univ. Rhode Island Arizona State Univ. Auburn Univ. Brown Univ. Carnegie Mellon City Univ., NY. Florida Intl. Univ. Georgetown Univ. Univ. Maryland Univ. Michigan Univ. Minnesota North Carolina State Princeton Univ. Univ. Colorado Univ. Mass, Amherst Univ. South Florida Univ. Buffalo, SUNY Univ. Houston Univ. Southern Mississippi

2 Director: Co Director: Vijay T. John, Tulane Univ. Kalliat T. Valsaraj, LSU Additional Members of the Steering Committee: Keith Johnston, UT Austin, Arijit Bose, Univ. Rhode Island. 43 investigators, 22 academic institutions. Advisory Board Chair: Thomas Coolbaugh, ExxonMobil. Advisory Board Member Affiliations: ExxonMobil, Bedford Inst. Oceanography, NIST, NCNR (NIST), PNNL, Los Alamos, Sandia, Evonik, BASF, Cabot, PetroTel Background: Consortium evolved from a workshop sponsored by the Interfacial, Transport and Thermodynamics Program at NSF (Sept. 21, 2010).

3 Primarily physical scientists and chemical and environmental engineers. Experiment and theory. Research driven by molecular concepts. Focus on Theme IV (Technologies for mitigation and remediation) Use of Computational Chemistry and Molecular Simulations. Application of modern tools (neutron and x-ray scattering, cryo electron microscopy, high pressure spectroscopy, etc.)

4 Three Focused Research Groups (1) FRG-1: Thermodynamics, Interfacial Phenomena and Microstructure of Oil/Gas/Dispersant Mixtures in the Deep Sea (Keith Johnston) (2) FRG-2: Dynamics of phenomena related to oildispersant systems. (KT Valsaraj) (3) FRG-3: Novel Dispersant Design and Efficacy Testing for Alternative Formulations. (Arijit Bose)

5 Outreach and Broader Impacts Traditional Research Experience for Undergraduates (individual PIs) LSAMP (Louis-Stokes Alliance for Minority Participation in Research) type program centered at Tulane/LSU for the summers. Teacher training and research experience centered at Tulane/LSU. Journalist Training centered at the University of Rhode Island (Metcalf Institute) Community Outreach

6 Simulation of Clathrate Hydrate Formation Molecular Simulations Generation of phase diagrams. Understanding gas hydrate formation in systems with gas expanded systems. Surfactants and particles at interfaces

7 Characterization of Dispersant Adsorption Timescales Using a Microscale Tensiometer Model system: Dispersant:Tween-80 Oil: Squalane Aqueous: SSW Microtensiometer technique: Microscale interface Rapid, low volume Dynamics of adsorption Oil Solution Irreversibly adsorbed surface active species. Wash out solution Initial results: Isotherm for the model system has been characterized. Tween-80 appears to be a multicomponent material with at least one species that does not desorb easily from the interface. Ramification: Primary surfactant component of dispersants contains component that adsorbs irreversibly. If this is a PEO-like molecule, bacterial growth could be hindered.

8 Phase Selective Gelation

9 Particles to stabilize droplets Pickering Emulsions

10 Advanced Multiphase Flow Models Large Scale dispersion of oil plume. Simulated using volume averaged models (cross current right to left, Oil released as a source at the bottom) Rise and fall of oil droplets. The initially light droplets rise, but lose lighter material by dissolution and evaporation. becoming heavier and finally sink to the bottom. Simulated by using volume of fluid algorithm Future work will look at gas/oil plumes and formation of intrusion layers in stratified fields Future work will look at the effect of surfactants on such processes

11 Microfluidic studies of dispersion and coalescence Goal: Understand the optimal surfactant and polymeric surfactant combinations to enable rapid dispersion of oil in the deep water environment, but stabilization against coalescence at the ocean surface. 1. Microfluidics enables ultrafast studies of surfactant attachment to interfaces and drop breakup 2. During drop ascent surfactants partition off of the oil drop interface and droplets will recoalesce at the surface. Multi-point, cooperative polymeric surfactant adsorption prevents slick formation. Microfluidics enables precise control and quantification of coalescence forces.

12 LARGE OIL GLOBULE APPLICATION OF DISPERSANT HYDROPHOBIC GROUPS OF BIOPOLYMER ANCHOR IN OIL AND THE POLYMER WRAPS ITSELF AROUND THE DROP AND ENHANCES COLLOIDAL STABILIZATION BREAKS OIL INTO SMALL DROPLETS APPLICATION OF BIOPOLYMER Modified Biopolymers (chitosans, alginates) to act in synergy with dispersants

13 Left: COREXIT alone Right: COREXIT + HMC 1:100 v/v COREXIT :Oil

14 Instrument Access Scattering (neutron, x-rays) NCNR, CAMD Microfabrication Multiple Institutions Cryo Electron Microscopy - Minnesota, Tulane, URI, UT Austin Atomic Force Microscopy Multiple Institutions Analytical Instrumentation Multiple Institutions

15 Consortium Website to be set up to facilitate collaboration. First Full Meeting of the Consortium Participants in conjunction with the ACS Spring Meeting, San Diego, March Symposium on Dispersants (organized by Karl Linden)