Example 25: Determine the moment M AB produced by force F in Figure which tends to rotate the rod about the AB axis.
|
|
- Julius Gilbert
- 5 years ago
- Views:
Transcription
1 Eample 25: Determine the moment M AB produced by force F in Figure which tends to rotate the rod about the AB ais. Solution: Because that F is parallel to the z-ais so it has no moment about z-ais. Its moment about -ais equals zero because its line action passing the -ais and so the lever arm (d = 0) equals zero. Thus it has only moment about y-ais at point A. M = F d F d = *0.6 = 80N m y z z. M AB = M y * = 80 * = 80.5N. m 5 5 A M =80N.m y 2 5 B.University of Qadisiyah\Faculty of Eng.\Civil Dep 45
2 Eample 26: Determine the combined moment of P=7.886-lb and Q= 20-lb force about the ais GB. Solution: The Cartesian components of P and Q are: P = P cosα = * = lb 2 P = P cos β = cos 90 = 0lb y Pz = P cosγ = * = lb 2 Q = Q cosα = 20 cos 90 = 0lb Q Q y z = Q cos β = 20 * 3 = 8.97 lb 0 = Q cosγ = 20 * = 6.324lb 0 Q= Q z =8.97 lb P=7.886 lb 2 Q z =6.324 lb And their moments about GF and OG are: 0 3 Q= P z =2.647 lb P =2.647 lb M GF = ( Pz d P d z ) + ( Qzd Qd z ) [ * * 4] + [ 6.324* 4 0* 4] = = lb.in M = OG = ( Py d P d y) + ( Qyd Qd y) [ 0 * *2] + [( 8.97) * 4 0*2] = lb.in Finally M GB is: 3 M GB = * * = 0lb. in 0 0 M OG = lb.in M GF = lb.in 0 3 Q=.University of Qadisiyah\Faculty of Eng.\Civil Dep 46
3 .University of Qadisiyah\Faculty of Eng.\Civil Dep 47
4 .University of Qadisiyah\Faculty of Eng.\Civil Dep 48
5 Couples A couple consists of two parallel, noncollinear forces that are equal in magnitude and opposite in direction A couple is a purely rotational effect, it has a moment but no resultant force (resultant equals zero thus it has no tendency to translate the body in any direction). A couple possesses two important characteristics: a) A couple has no resultant force (ΣF = 0), and b) The moment of a couple is the same about any point in the plane of the couple. So it may be considered as a free vector quantity (not localized vector and can be moved to any parallel position) having both magnitude and direction (aspect of plane and sense of rotation). The magnitude of the couple is: M O = F(a+d) Fa M=Fd (2-) where F is the magnitude of one forces, and d is the perpendicular distance or moment arm between the forces. The direction and the sense of the couple moment are determined by the right-hand rule, where the thumb indicates this direction when the fingers are curled with the sense of rotation caused by the couple forces. In all cases, M will act perpendicular to the plane containing these forces..university of Qadisiyah\Faculty of Eng.\Civil Dep 49
6 Equivalent couples: If two couples produce a moment with the same magnitude and direction, then these two couples are equivalent. Figure below illustrates the four operations that may be performed on a couple without changing its moment; all couples shown in the figure are equivalent. The operations are. Changing the magnitude F of each force and the perpendicular distance d while keeping the product Fd constant, 2. Rotating the couple in its plane, 3. Moving the couple to a parallel position in its plane 4. Moving the couple to a parallel plane Resultant of Couples Because couples are vectors, they may be added by the usual rules of vector addition. Being free vectors, the requirement that the couples to be added must have a common point of application does not apply. The resolution of couples is no different than the resolution of moments of forces..university of Qadisiyah\Faculty of Eng.\Civil Dep 50
7 Eample 27: Determine the resultant couple moment of three couples acting on the plate in Figure below. Solution: As shown the perpendicular distances between each pair of couple forces are d = 4 ft, d 2 = 3 ft, and d 3 = 5 ft. + M R = ΣM; M R = -F d + F 2 d 2 - F 3 d 3 = (-200)(4) + (450)(3) - (300)(5) = -950 lb.ft = 950 lb.ft The negative sign indicates that M R has a clockwise rotational sense. Eample 28: Determine the magnitude and direction of the couple moment acting on the gear in Figure (a) Solution: The easiest solution requires resolving each force into its components as shown in Figure (b). + M R = ΣM O ; M = (600 cos30 o )(0.2) (600 sin30 o )(0.2) = 43.9 N.m + M R = ΣM A ; M = (600 cos30 o )(0.2) (600 sin30 o )(0.2) = 43.9 N.m.University of Qadisiyah\Faculty of Eng.\Civil Dep 5
8 Note: The same result can also be obtained using M = Fd. Eample 29: Determine the couple moment acting on the pipe shown in Figure (a). Segment AB is directed 30 o below -y plane. Solution: The perpendicular distance between the lines of action of the couple forces is d = 6cos30 o = 5.96 in Taking moments of the forces about either point A or point B yields M = Fd = -25(5.96) = lb.in Applying the right hand rule, M acts in the negative y direction M 30 lb. in.university of Qadisiyah\Faculty of Eng.\Civil Dep 52
9 Eample 30: The rigid structural member is subjected to a couple of the two 00 N forces. Replace this couple by an equivalent couple consisting of the two forces P and P, each of which has a magnitude of 400 N. Determine the proper angle θ. Solution: The original couple is counterclockwise when the plane is viewed from above, and its magnitude is M = Fd M =00(0.) = 0 N.m The forces P and P produce a counterclockwise couple M = 400 (0.040) cosθ Equating the two epressions gives 0 = 400 (0.040) cosθ 0 cos θ = = 6 o 5.3 Hint: Since the two equal couples are parallel free vectors, the only dimensions which are relevant are those which give the perpendicular distance between the forces of the couples. Eample 3: Determine the magnitude and direction of the couple M which will replace the two given couples and still produce the same eternal effect on the block. Specify the two forces F and F, applied in the two faces of the block parallel to the y-z plane, which may replace the four given forces. The 30 N forces act parallel to the y-z plane. Solution: The couple due to 30 N forces has the magnitude.university of Qadisiyah\Faculty of Eng.\Civil Dep 53
Engineering Mechanics: Statics
Engineering Mechanics: Statics Chapter 2: Force Systems Part A: Two Dimensional Force Systems Force Force = an action of one body on another Vector quantity External and Internal forces Mechanics of Rigid
More informationIshik University / Sulaimani Architecture Department Structure ARCH 214 Chapter -4- Force System Resultant
Ishik University / Sulaimani Architecture Department 1 Structure ARCH 214 Chapter -4- Force System Resultant 2 1 CHAPTER OBJECTIVES To discuss the concept of the moment of a force and show how to calculate
More informationChapter -4- Force System Resultant
Ishik University / Sulaimani Civil Engineering Department Chapter -4- Force System Resultant 1 2 1 CHAPTER OBJECTIVES To discuss the concept of the moment of a force and show how to calculate it in two
More informationForce System Resultants. Engineering Mechanics: Statics
Force System Resultants Engineering Mechanics: Statics Chapter Objectives To discuss the concept of the moment of a force and show how to calculate it in 2-D and 3-D systems. Definition of the moment of
More informationMOMENT OF A FORCE ABOUT A POINT
MOMENT OF A FORCE ABOUT A POINT The tendency of a body to rotate about an axis passing through a specific point O when acted upon by a force (sometimes called a torque). 1 APPLICATIONS A torque or moment
More informationChapter 8 Rotational Equilibrium and Rotational Dynamics Force vs. Torque Forces cause accelerations Torques cause angular accelerations Force and
Chapter 8 Rotational Equilibrium and Rotational Dynamics Force vs. Torque Forces cause accelerations Torques cause angular accelerations Force and torque are related Torque The door is free to rotate about
More informationS in. S in 40 M s = (20.35)(30.0) M s = 611 in-lb clockwise = 2.12 m with a negative action. The moment about B is
Problem 4.14 The moment eerted about point E b the weight is 299 in-lb. What moment does the weight eert about point S? S 30 13 in. 12 in. E 40 The ke is the geometr rom trigonometr, cos 40 = d 2 13 in,
More informationChapter 8. Rotational Equilibrium and Rotational Dynamics
Chapter 8 Rotational Equilibrium and Rotational Dynamics Force vs. Torque Forces cause accelerations Torques cause angular accelerations Force and torque are related Torque The door is free to rotate about
More informationChapter 8. Rotational Equilibrium and Rotational Dynamics
Chapter 8 Rotational Equilibrium and Rotational Dynamics 1 Force vs. Torque Forces cause accelerations Torques cause angular accelerations Force and torque are related 2 Torque The door is free to rotate
More informationApplication of Forces. Chapter Eight. Torque. Force vs. Torque. Torque, cont. Direction of Torque 4/7/2015
Raymond A. Serway Chris Vuille Chapter Eight Rotational Equilibrium and Rotational Dynamics Application of Forces The point of application of a force is important This was ignored in treating objects as
More informationChap. 3 Rigid Bodies: Equivalent Systems of Forces. External/Internal Forces; Equivalent Forces
Chap. 3 Rigid Bodies: Equivalent Systems of Forces Treatment of a body as a single particle is not always possible. In general, the size of the body and the specific points of application of the forces
More informationCreated by T. Madas VECTOR MOMENTS. Created by T. Madas
VECTOR MOMENTS Question 1 (**) The vectors i, j and k are unit vectors mutually perpendicular to one another. Relative to a fixed origin O, a light rigid rod has its ends located at the points 0, 7,4 B
More informationENGINEERING MECHANICS BAA1113. Chapter 4: Force System Resultants (Static)
ENGINEERING MECHANICS BAA1113 Chapter 4: Force System Resultants (Static) by Pn Rokiah Bt Othman Faculty of Civil Engineering & Earth Resources rokiah@ump.edu.my Chapter Description Aims To explain the
More informationMOMENT OF A COUPLE. Today s Objectives: Students will be able to. a) define a couple, and, b) determine the moment of a couple.
Today s Objectives: Students will be able to MOMENT OF A COUPLE a) define a couple, and, b) determine the moment of a couple. In-Class activities: Check Homework Reading Quiz Applications Moment of a Couple
More informationMoments and Torques. M = F d
Moments and Torques When a force is applied to an object, the object reacts in six possible ways. It can elongate, compress, translate (moves left, right, up, down, etc.), bend, twist or rotate. The study
More informationTransformations. Chapter D Transformations Translation
Chapter 4 Transformations Transformations between arbitrary vector spaces, especially linear transformations, are usually studied in a linear algebra class. Here, we focus our attention to transformation
More informationwhere x and y are any two non-parallel directions in the xy-plane. iii) One force equation and one moment equation.
Concurrent Force System ( of Particles) Recall that the resultant of a concurrent force system is a force F R that passes through the point of concurrency, which we label as point O. The moment equation,
More informationChapter 8. Centripetal Force and The Law of Gravity
Chapter 8 Centripetal Force and The Law of Gravity Centripetal Acceleration An object traveling in a circle, even though it moves with a constant speed, will have an acceleration The centripetal acceleration
More informationSTATICS. Equivalent Systems of Forces. Vector Mechanics for Engineers: Statics VECTOR MECHANICS FOR ENGINEERS: Contents 9/3/2015.
3 Rigid CHPTER VECTR ECHNICS R ENGINEERS: STTICS erdinand P. eer E. Russell Johnston, Jr. Lecture Notes: J. Walt ler Teas Tech Universit odies: Equivalent Sstems of orces Contents Introduction Eternal
More informationChapter 12 Static Equilibrium
Chapter Static Equilibrium. Analysis Model: Rigid Body in Equilibrium. More on the Center of Gravity. Examples of Rigid Objects in Static Equilibrium CHAPTER : STATIC EQUILIBRIUM AND ELASTICITY.) The Conditions
More informationName. MECH 223 Engineering Statics. Midterm 1, February 24 th 2015
1 Name MECH 223 Engineering Statics Midterm 1, February 24 th 2015 Question 1 (20 + 5 points) (a) (5 points) Form the vector products B C and B C (where B = B ) and use the result to prove the identity
More informationStructures Activity 2 Levers
Structures Activity 2 Levers Object: The objects of this activity are to explore the concepts of torque and rotational equilibrium, study the three classes of lever, and apply the concepts of torque and
More information2. Force Systems. 2.1 Introduction. 2.2 Force
2. Force Systems 2.1 Introduction 2.2 Force - A force is an action of one body on another. - A force is an action which tends to cause acceleration of a body (in dynamics). - A force is a vector quantity.
More informationCheck out course website for: Link to practice problems & old/sample exams Link to HW website Lecture notes
Common Exam 1 Time: 4-5:25pm on 9/26, Monday (arrive 15 min before) Room: TBA Covers Week 1 and 2 in the syllabus All problems will be open-ended, no multiple-choice Check out course website http://web.njit.edu/~kenahn
More informationForce Couple Systems = Replacement of a Force with an Equivalent Force and Moment (Moving a Force to Another Point)
orce Couple Sstems = eplacement of a orce with an Equivalent orce and oment (oving a orce to Another Point) The force acting on a bod has two effects: The first one is the tendenc to push or pull the bod
More informationModels and Anthropometry
Learning Objectives Models and Anthropometry Readings: some of Chapter 8 [in text] some of Chapter 11 [in text] By the end of this lecture, you should be able to: Describe common anthropometric measurements
More informationMECHANICS. Prepared by Engr. John Paul Timola
MECHANICS Prepared by Engr. John Paul Timola MECHANICS a branch of the physical sciences that is concerned with the state of rest or motion of bodies that are subjected to the action of forces. subdivided
More informationRecap I. Angular position: Angular displacement: s. Angular velocity: Angular Acceleration:
Recap I Angular position: Angular displacement: s Angular velocity: Angular Acceleration: Every point on a rotating rigid object has the same angular, but not the same linear motion! Recap II Circular
More informationMOMENT OF A COUPLE. Today s Objectives: Students will be able to a) define a couple, and, b) determine the moment of a couple.
MOMENT OF A COUPLE Today s Objectives: Students will be able to a) define a couple, and, b) determine the moment of a couple. In Class activities: Check Homework Reading Quiz Applications Moment of a Couple
More informationChapter 12: Rotation of Rigid Bodies. Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics
Chapter 12: Rotation of Rigid Bodies Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics Translational vs Rotational 2 / / 1/ 2 m x v dx dt a dv dt F ma p mv KE mv Work Fd P Fv 2 /
More informationSIMPLIFICATION OF FORCE AND COUPLE SYSTEMS & THEIR FURTHER SIMPLIFICATION
SIMPLIFICATION OF FORCE AND COUPLE SYSTEMS & THEIR FURTHER SIMPLIFICATION Today s Objectives: Students will be able to: a) Determine the effect of moving a force. b) Find an equivalent force-couple system
More informationPhysics 170 Lecture 9. We all have our moments...
Phys 170 Lecture 9 1 Physics 170 Lecture 9 Chapter 4 - Force System Resultants We all have our moments... Moment of a Force in 2D M = ±RF sinθ = ±RF = ±Fd = R x F y R y F x Use which ever is easiest, they
More informationfive moments ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2014 lecture ARCH 614
ELEMENTS OF ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SPRING 2014 lecture five moments Moments 1 Moments forces have the tendency to make a body rotate about an axis http://www.physics.umd.edu
More informationObjective 1. Lesson 87: The Cross Product of Vectors IBHL - SANTOWSKI FINDING THE CROSS PRODUCT OF TWO VECTORS
Lesson 87: The Cross Product of Vectors IBHL - SANTOWSKI In this lesson you will learn how to find the cross product of two vectors how to find an orthogonal vector to a plane defined by two vectors how
More informationCross Product Angular Momentum
Lecture 21 Chapter 12 Physics I Cross Product Angular Momentum Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsi IN THIS CHAPTER, you will continue discussing rotational dynamics
More informationChapter 4 Force System Resultant Moment of a Force
Chapter 4 Force System Resultant Moment of a Force MOMENT OF A FORCE SCALAR FORMULATION, CROSS PRODUCT, MOMENT OF A FORCE VECTOR FORMULATION, & PRINCIPLE OF MOMENTS Today s Objectives : Students will be
More informationTorque. Objectives. Assessment. Assessment. Equations. Physics terms 6/2/14
Objectives Calculate torque given the lever arm (perpendicular distance) and the force. Calculate torque in newton meters and in pound feet. Interpret positive and negative signs in the context of torque.
More informationPhysics 101 Lecture 11 Torque
Physics 101 Lecture 11 Torque Dr. Ali ÖVGÜN EMU Physics Department www.aovgun.com Force vs. Torque q Forces cause accelerations q What cause angular accelerations? q A door is free to rotate about an axis
More informationSTATICS. Equivalent Systems of Forces. Vector Mechanics for Engineers: Statics VECTOR MECHANICS FOR ENGINEERS: Contents & Objectives.
3 Rigid CHATER VECTOR ECHANICS FOR ENGINEERS: STATICS Ferdinand. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Teas Tech Universit Bodies: Equivalent Sstems of Forces Contents & Objectives
More informationFigure 17.1 The center of mass of a thrown rigid rod follows a parabolic trajectory while the rod rotates about the center of mass.
17.1 Introduction A body is called a rigid body if the distance between any two points in the body does not change in time. Rigid bodies, unlike point masses, can have forces applied at different points
More informationENGR-1100 Introduction to Engineering Analysis. Lecture 9
ENGR-1100 Introduction to Engineering Analysis Lecture 9 MOMENT OF A FORCE (SCALAR FORMULATION), CROSS PRODUCT, MOMENT OF A FORCE (VECTOR FORMULATION), & PRINCIPLE OF MOMENTS Today s Objectives : Students
More informationME 101: Engineering Mechanics
ME 0: Engineering Mechanics Rajib Kumar Bhattacharja Department of Civil Engineering ndian nstitute of Technolog Guwahati M Block : Room No 005 : Tel: 8 www.iitg.ernet.in/rkbc Area Moments of nertia Parallel
More informationMiscellaneous (dimension, angle, etc.) - black [pencil] Use different colors in diagrams. Body outline - blue [black] Vector
1. Sstems of orces & s 2142111 Statics, 2011/2 Department of Mechanical Engineering, Chulalongkorn Uniersit bjecties Students must be able to Course bjectie Analze a sstem of forces and moments Chapter
More informationEquivalent Systems of Forces
Equivalent Systems of orces Contents Introduction( 绪论 ) Vector Products of Two Vectors( 矢量积 ) Moment of a orce About a Point( 力对点的矩 ) Moment of a orce About a Given Axis( 力对轴的矩 ) Moment of a Couple( 力偶矩
More informationME 201 Engineering Mechanics: Statics
ME 01 Engineering Mechanics: Statics Unit 5.3 Reduction of a Simple Distributed Loading Distributed Loads Thus far we ve been working with loads that are concentrated at a point: Many times in engineering
More informationQuizzam Module 1 : Statics
Structural Steel Design Quizzam odule : Statics NAE Draw shear and moment diagrams for the following loading conditions. Note the reactions. Calculate the maximum amount of internal bending moment. 0 500
More informationWhat you will learn today
What you will learn today The Dot Product Equations of Vectors and the Geometry of Space 1/29 Direction angles and Direction cosines Projections Definitions: 1. a : a 1, a 2, a 3, b : b 1, b 2, b 3, a
More informationMagnetism and Vectors
Physics 1051 Workshop 5 Magnetism and Vectors Workshop 5 - Contents I. Where do Vector Cross Products Appear? II. Review of What We've Seen Already I. Magnetic Force on a Charge Particle II.Magnetic Force
More informationTorques and Static Equilibrium
Torques and Static Equilibrium INTRODUCTION Archimedes, Greek mathematician, physicist, engineer, inventor and astronomer, was widely regarded as the leading scientist of the ancient world. He made a study
More informationPhysics A - PHY 2048C
Physics A - PHY 2048C and 11/15/2017 My Office Hours: Thursday 2:00-3:00 PM 212 Keen Building Warm-up Questions 1 Did you read Chapter 12 in the textbook on? 2 Must an object be rotating to have a moment
More informationThe Cross Product. In this section, we will learn about: Cross products of vectors and their applications.
The Cross Product In this section, we will learn about: Cross products of vectors and their applications. THE CROSS PRODUCT The cross product a x b of two vectors a and b, unlike the dot product, is a
More informationMoment of a force (scalar, vector ) Cross product Principle of Moments Couples Force and Couple Systems Simple Distributed Loading
Chapter 4 Moment of a force (scalar, vector ) Cross product Principle of Moments Couples Force and Couple Systems Simple Distributed Loading The moment of a force about a point provides a measure of the
More informationChapter 8. Rotational Motion
Chapter 8 Rotational Motion The Action of Forces and Torques on Rigid Objects In pure translational motion, all points on an object travel on parallel paths. The most general motion is a combination of
More informationRotational Kinematics and Dynamics. UCVTS AIT Physics
Rotational Kinematics and Dynamics UCVTS AIT Physics Angular Position Axis of rotation is the center of the disc Choose a fixed reference line Point P is at a fixed distance r from the origin Angular Position,
More informationRotational Motion. Lecture 17. Chapter 10. Physics I Department of Physics and Applied Physics
Lecture 17 Chapter 10 Physics I 11.13.2013 otational Motion Torque Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsi Lecture Capture: http://echo360.uml.edu/danylov2013/physics1fall.html
More informationh p://edugen.wileyplus.com/edugen/courses/crs1404/pc/c05/c2hlch... CHAPTER 5 MOMENTS 1 of 3 10-Sep-12 16:35
Peter Christopher/Masterfile... 1 of 3 10-Sep-12 16:35 CHAPTER 5 MOMENTS Peter Christopher/Masterfile... 2 of 3 10-Sep-12 16:35 Peter Christopher/Masterfile In Chapter 4 we considered the forces that push
More informationChap. 4 Force System Resultants
Chap. 4 Force System Resultants Chapter Outline Moment of a Force Scalar Formation Cross Product Moment of Force Vector Formulation Principle of Moments Moment of a Force about a Specified xis Moment of
More informationPROBLEM rad/s r. v = ft/s
PROLEM 15.38 An automobile traels to the right at a constant speed of 48 mi/h. If the diameter of a wheel is 22 in., determine the elocities of Points, C,, and E on the rim of the wheel. A 48 mi/h 70.4
More informationGeneral Physics (PHY 2130)
General Physics (PHY 130) Lecture 0 Rotational dynamics equilibrium nd Newton s Law for rotational motion rolling Exam II review http://www.physics.wayne.edu/~apetrov/phy130/ Lightning Review Last lecture:
More informationEngineering Mechanics: Statics in SI Units, 12e
Engineering Mechanics: Statics in SI Units, 12e 5 Equilibrium of a Rigid Body Chapter Objectives Develop the equations of equilibrium for a rigid body Concept of the free-body diagram for a rigid body
More informationMOMENT OF A FORCE SCALAR FORMULATION, CROSS PRODUCT, MOMENT OF A FORCE VECTOR FORMULATION, & PRINCIPLE OF MOMENTS
MOMENT OF A FORCE SCALAR FORMULATION, CROSS PRODUCT, MOMENT OF A FORCE VECTOR FORMULATION, & PRINCIPLE OF MOMENTS Today s Objectives : Students will be able to: a) understand and define moment, and, b)
More informationRELATIVE MOTION ANALYSIS: VELOCITY (Section 16.5)
RELATIVE MOTION ANALYSIS: VELOCITY (Section 16.5) Today s Objectives: Students will be able to: a) Describe the velocity of a rigid body in terms of translation and rotation components. b) Perform a relative-motion
More informationChapter -4- Force System Resultant
Ishik University / Sulaimani Civil Engineering Department Chapter -4- Force System Resultant 1 4.3 MOMENT OF A COUPLE Couple - two parallel forces. - same magnitude but opposite direction. - separated
More informationChapter 12: Rotation of Rigid Bodies. Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics
Chapter 1: Rotation of Rigid Bodies Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics Translational vs Rotational / / 1/ m x v dx dt a dv dt F ma p mv KE mv Work Fd P Fv / / 1/ I
More informationCH 19-1 Magnetic Field
CH 19-1 Magnetic Field Important Ideas A moving charged particle creates a magnetic field everywhere in space around it. If the particle has a velocity v, then the magnetic field at this instant is tangent
More informationRotational Motion and Torque
Rotational Motion and Torque Introduction to Angular Quantities Sections 8- to 8-2 Introduction Rotational motion deals with spinning objects, or objects rotating around some point. Rotational motion is
More informationMECE 3321: MECHANICS OF SOLIDS CHAPTER 5
MECE 3321: MECHANICS OF SOLIDS CHAPTER 5 SAMANTHA RAMIREZ TORSION Torque A moment that tends to twist a member about its longitudinal axis 1 TORSIONAL DEFORMATION OF A CIRCULAR SHAFT Assumption If the
More informationRotational Kinetic Energy
Lecture 17, Chapter 10: Rotational Energy and Angular Momentum 1 Rotational Kinetic Energy Consider a rigid body rotating with an angular velocity ω about an axis. Clearly every point in the rigid body
More informationSKAA 1213 Engineering Mechanics
SKAA 1213 Engineering Mechanics TPIC 5 Moment and Couple Lecturers: Rosli Anang Dr. Mohd Yunus Ishak Dr. Tan Cher Siang Moment of a Force Moment of a force about a point/axis the tendency of the force
More informationPlease Visit us at:
IMPORTANT QUESTIONS WITH ANSWERS Q # 1. Differentiate among scalars and vectors. Scalars Vectors (i) The physical quantities that are completely (i) The physical quantities that are completely described
More informationRotational Kinematics
Rotational Kinematics Rotational Coordinates Ridged objects require six numbers to describe their position and orientation: 3 coordinates 3 axes of rotation Rotational Coordinates Use an angle θ to describe
More informationRotational Motion. Lecture 17. Chapter 10. Physics I Department of Physics and Applied Physics
Lecture 17 Chapter 10 Physics I 04.0.014 otational Motion Torque Course website: http://faculty.uml.edu/andriy_danylov/teaching/physicsi Lecture Capture: http://echo360.uml.edu/danylov013/physics1spring.html
More informationEquilibrium of Rigid Bodies
Equilibrium of Rigid Bodies 1 2 Contents Introduction Free-Bod Diagram Reactions at Supports and Connections for a wo-dimensional Structure Equilibrium of a Rigid Bod in wo Dimensions Staticall Indeterminate
More informationVector Mechanics: Statics
PDHOnline Course G492 (4 PDH) Vector Mechanics: Statics Mark A. Strain, P.E. 2014 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.pdhonline.org www.pdhcenter.com
More informationKINESIOLOGY PT617 Moment of Force and Rotation Homework Solution
KINESIOLOGY PT617 Moment of Force and Rotation Homework Solution 1. Muscle force F = 25 N has an insertion at I, θ= 30, and the distance between insertion and joint center C is d = 0.2 m. Sketch a diagram
More information3D Force Couple System and Resultant. Q.No.1: Replace the force system by an equivalent force and couple moment at point A.
3D Force Couple System and Resultant Q.No.1: Replace the force system by an equivalent force and couple moment at point A. Q.No.2: Handle forces F1 and F2 are applied to the electric drill. Replace this
More informationAPPLIED MECHANICS I Resultant of Concurrent Forces Consider a body acted upon by co-planar forces as shown in Fig 1.1(a).
PPLIED MECHNICS I 1. Introduction to Mechanics Mechanics is a science that describes and predicts the conditions of rest or motion of bodies under the action of forces. It is divided into three parts 1.
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 3 2, 5 2 C) - 5 2
Test Review (chap 0) Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. Solve the problem. ) Find the point on the curve x = sin t, y = cos t, -
More informationRotational Kinematics
Rotational Kinematics 1 Linear Motion Rotational Motion all variables considered positive if motion in counterclockwise direction displacement velocity acceleration angular displacement (Δθ) angular velocity
More informationMECHANICS OF MATERIALS
CHAPTER MECHANICS OF MATERIALS Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf Lecture Notes: J. Walt Oler Teas Tech Universit Transformations of Stress and Strain 006 The McGraw-Hill Companies,
More informationRotation. I. Kinematics - Angular analogs
Rotation I. Kinematics - Angular analogs II. III. IV. Dynamics - Torque and Rotational Inertia Work and Energy Angular Momentum - Bodies and particles V. Elliptical Orbits The student will be able to:
More informationIf the pull is downward (Fig. 1), we want C to point into the page. If the pull is upward (Fig. 2), we want C to point out of the page.
11.5 Cross Product Contemporary Calculus 1 11.5 CROSS PRODUCT This section is the final one about the arithmetic of vectors, and it introduces a second type of vector vector multiplication called the cross
More informationFree Body Diagram: Solution: The maximum load which can be safely supported by EACH of the support members is: ANS: A =0.217 in 2
Problem 10.9 The angle β of the system in Problem 10.8 is 60. The bars are made of a material that will safely support a tensile normal stress of 8 ksi. Based on this criterion, if you want to design the
More informationMEM202 Engineering Mechanics - Statics MEM
E Engineering echanics - Statics E hapter 6 Equilibrium of Rigid odies k j i k j i R z z r r r r r r r r z z E Engineering echanics - Statics Equilibrium of Rigid odies E Pin Support N w N/m 5 N m 6 m
More informationPhysics 111. Lecture 22 (Walker: ) Torque Rotational Dynamics Static Equilibrium Oct. 28, 2009
Physics 111 Lecture 22 (Walker: 11.1-3) Torque Rotational Dynamics Static Equilibrium Oct. 28, 2009 Lecture 22 1/26 Torque (τ) We define a quantity called torque which is a measure of twisting effort.
More informationSolution: (a) (b) (N) F X =0: A X =0 (N) F Y =0: A Y + B Y (54)(9.81) 36(9.81)=0
Prolem 5.6 The masses of the person and the diving oard are 54 kg and 36 kg, respectivel. ssume that the are in equilirium. (a) Draw the free-od diagram of the diving oard. () Determine the reactions at
More informationAngular velocity and angular acceleration CHAPTER 9 ROTATION. Angular velocity and angular acceleration. ! equations of rotational motion
Angular velocity and angular acceleration CHAPTER 9 ROTATION! r i ds i dθ θ i Angular velocity and angular acceleration! equations of rotational motion Torque and Moment of Inertia! Newton s nd Law for
More informationTorque. Physics 6A. Prepared by Vince Zaccone For Campus Learning Assistance Services at UCSB
Physics 6A Torque is what causes angular acceleration (just like a force causes linear acceleration) Torque is what causes angular acceleration (just like a force causes linear acceleration) For a torque
More information( ) ( ) ( ) ( ) TNM046: Datorgrafik. Transformations. Linear Algebra. Linear Algebra. Sasan Gooran VT Transposition. Scalar (dot) product:
TNM046: Datorgrafik Transformations Sasan Gooran VT 04 Linear Algebra ( ) ( ) =,, 3 =,, 3 Transposition t = 3 t = 3 Scalar (dot) product: Length (Norm): = t = + + 3 3 = = + + 3 Normaliation: ˆ = Linear
More informationRotational Motion About a Fixed Axis
Rotational Motion About a Fixed Axis Vocabulary rigid body axis of rotation radian average angular velocity instantaneous angular average angular Instantaneous angular frequency velocity acceleration acceleration
More informationChapter 8. Rotational Equilibrium and Rotational Dynamics
Chapter 8 Rotational Equilibrium and Rotational Dynamics Wrench Demo Torque Torque, τ, is the tendency of a force to rotate an object about some axis τ = Fd F is the force d is the lever arm (or moment
More informationSOLUTION 4 1. If A, B, and D are given vectors, prove the distributive law for the vector cross product, i.e., A : (B + D) = (A : B) + (A : D).
4 1. If A, B, and D are given vectors, prove the distributive law for the vector cross product, i.e., A : (B + D) = (A : B) + (A : D). Consider the three vectors; with A vertical. Note obd is perpendicular
More informationUniversity of Alabama Department of Physics and Astronomy. PH 125 / LeClair Spring A Short Math Guide. Cartesian (x, y) Polar (r, θ)
University of Alabama Department of Physics and Astronomy PH 125 / LeClair Spring 2009 A Short Math Guide 1 Definition of coordinates Relationship between 2D cartesian (, y) and polar (r, θ) coordinates.
More informationEQUATIONS OF MOTION: CYLINDRICAL COORDINATES (Section 13.6)
EQUATIONS OF MOTION: CYLINDRICAL COORDINATES (Section 13.6) Today s Objectives: Students will be able to analyze the kinetics of a particle using cylindrical coordinates. APPLICATIONS The forces acting
More informationEMA 3702 Mechanics & Materials Science (Mechanics of Materials) Chapter 3 Torsion
EMA 3702 Mechanics & Materials Science (Mechanics of Materials) Chapter 3 Torsion Introduction Stress and strain in components subjected to torque T Circular Cross-section shape Material Shaft design Non-circular
More informationVectors Summary. can slide along the line of action. not restricted, defined by magnitude & direction but can be anywhere.
Vectors Summary A vector includes magnitude (size) and direction. Academic Skills Advice Types of vectors: Line vector: Free vector: Position vector: Unit vector (n ): can slide along the line of action.
More information20 Torque & Circular Motion
Chapter 0 Torque & Circular Motion 0 Torque & Circular Motion The mistake that crops up in the application of Newton s nd Law for Rotational Motion involves the replacement of the sum of the torques about
More informationForces & Magnetic Dipoles. Phys 122 Lecture 18 D. Hertzog
orces & Magnetic Dipoles µ = τ U AI = µ = µ θ θ. Phys 122 Lecture 18 D. Hertzog µ usiness Regrade requests by 4 pm riday (no eceptions) Solutions/Key posted on home page Last Time: The Lorentz orce and
More informationTurning Forces and Levers. Junior Science
Turning Forces and Levers Junior Science Lesson Objectives Understand the terms - Lever, Fulcrum, Turning effect, Moment Recall the formula M= Fd and be able to calculate the moment of a force Be able
More informationUnit 1. (a) tan α = (b) tan α = (c) tan α = (d) tan α =
Unit 1 1. The subjects Engineering Mechanics deals with (a) Static (b) kinematics (c) Kinetics (d) All of the above 2. If the resultant of two forces P and Q is acting at an angle α with P, then (a) tan
More information