SYMBIOSIS CENTRE FOR DISTANCE LEARNING (SCDL) Subject: production and operations management
|
|
- Brendan Norton
- 6 years ago
- Views:
Transcription
1 Sample Questions: Section I: Subjective Questions 1. What are the inputs required to plan a master production schedule? 2. What are the different operations schedule types based on time and applications? 3. What is cellular manufacturing? 4. Write any five characteristics of mass production. 5. What is chase strategy of aggregate planning? 6. What are the objectives of good maintenance system? 7. What are different types of layout? Which one is suitable when the product is immovable? 8. What are the basic activities of preventive maintenance? Section II: Objective Questions Multiple Choice Single Response 1. Inadequate production capacity ultimately leads to 1] Low Productivity 2] Poor Machine Utilization 3] Poor Customer Service 4] Poor Planning 2. Technique which can help an organization to reduce inventory is called 1] MRP 2] TPM 3] CPM 4] CRM 3. How to calculate variance under the probability aspect of project planning? 1] Square root of { ( b-a ) / 6 } 2] Square of { ( b-a ) / 6 } 3] Square of { ( a-b ) / 6 } 4] Square root of { ( a+b ) / 6 } 4. With reference to the statistical control chart, if the process is in the state of statistical control, the fluctuations are due to
2 1] assignable variability 2] sequential variability 3] random variability 4] occasional variability 5. The specially trained individuals responsible for leading six sigma teams through the DMAIC process are referred to as 1] DMAIC Professionals 2] Green Belts 3] Master Black belts 4] Black belts 6. " What your process can deliver " is termed as 1] Variation 2] Control 3] Process Capability 4] Variance 7. Who is responsible for the selection of the job for method study? 1] Operator 2] Manager 3] Inspector 4] Storekeeper 8. What do you mean by the situation where the component is not completely rejected but it is to be corrected? 1] Reprocessing 2] Reproduction 3] Quality assurance 4] Inspection 9. Which is the next step to the scheduling in the planned maintenance work cycle? (2) 1] Controlling 2] Recording 3] Executing 4] Planning 10. Some of the common Objectives of a good layout are as following 1] Economy in material handling 2] Efficient utilization of available space 3] Minimization of production delays 4] Minimization of rejections Multiple Choice Multiple Response 11. What are the benefits of having the plant location near to the market? 1] Liaisons with dealers and wholesalers can be maintained economically and easily 2] Recovery from customers is easy and time saving
3 3] Labour turnover rate is low 4] Many administrative problems which cause perpetual headaches and add to costs are avoided 12. Which are the factors on which the structure of the transportation cost depends? 1] Average distance of shipment 2] Characteristics of the commodity 3] Power 4] Medium of shipment 13. JIT results in following benefits to the user company 1] Reduced inventories of raw materials, purchased parts, work in progress and finished goods. 2] Zero or reduced incoming inspection. 3] Early detection and correction of non-conformances thereby improving quality of purchased parts. 4] Slow response to engineering change requirements. 14. Some of the main principles of Six Sigma are: 1] Genuine Focus on customer 2] Data and Fact driven management 3] Process focus management and improvement 4] Efficient supply chain management and logistics. 15. What are the advantages of Critical Path Analysis? 1] It forces a through pre-planning 2] It gives equal weightage to control all activities. 3] It indicates the optimal start and finish times of each activity of the project. 4] It increases the coordination of tasks 16. Which are three different bases to establish an activity time? 1] Actual measurement 2] Past experience 3] Judgement 4] Historical data 17. The significant features of MPS are as follows 1] The MPS gives detailed timetable for making individual products. 2] The timetable meets requirements of aggregate plan as efficiently as possible. 3] The MPS works within the constraints of production plan but produces more specific schedule by individual products. 4] MPS and MRP are not related with each other. 18. In management prospective, Kanban is a visual indicator that triggers replenishment of item, such as 1] Card 2] Bin 3] Rack 4] Store
4 Fill in the Blanks 19. BLANK means assignment of task or work to a facility. 1] Controlling 2] Loading 3] Coordinating 4] Directing 20. The loss due to non-absorption of overheads for the period the machine is under breakdown is called as :BLANK 1] Opportunity cost 2] Down time cost 3] Added setup cost 4] Cost of repairs 21. The :BLANK anticipates failures and adopts necessary actions to check failures before they occur. 1] Shutdown Maintenance 2] Design-out Maintenance 3] Corrective Maintenance 4] Preventive maintenance 22. The :BLANK includes preventive maintenance activities which are carried out when the machine is still running. 1] Running Maintenance 2] Design-out Maintenance 3] Working Maintenance 4] Preventive maintenance 23. BLANK is the amount of time the master schedule extends into future. 1] Time Fence 2] Supply Chain 3] Planning Horizon 4] Critical Path 24. In case of Batch Production, when batches are small, :BLANK is the ratio of direct workers to supervisors, and vice versa. 1] Equal 2] Higher 3] Lower 4] Negative 25. BLANK activity is concerned with looking at events that will occur in future. 1] Planning 2] Staffing 3] Scheduling 4] Coordinating
5 26. BLANK means assignment of task or work to a facility. 1] Controlling 2] Loading 3] Coordinating 4] Directing 27. The :BLANK ---- represents the irreducible minimum time required to complete an activity. 1] Pessimistic time 2] Standard time 3] Normal time 4] Crash time 28. BLANK cost is the resultant of failure of the product delivered to the customer or put into the service. 1] Prevention Cost 2] External Failure Cost. 3] Appraisal cost 4] Hidden cost State True or False 29. Production Planning can be centralised or decentralised, Production Control will always be diffusive activity. 30. Once three time estimates are converted into a single time estimate, there is no fundamental difference between PERT and CPM as regards to time analysis of the network. 31. A sampling plan which perfectly discriminates will have vertical OC curve. 32. Six sigma does not strive for perfection. 33. Any proposed change must not be intimated to workers in advance. 34. The role of operations management is to transform a company s inputs into the finished goods or services. 35. Six Sigma uses proactive thinking. 36. The main purpose of Kanban Systems is to streamline manufacturing and procurement processes rather than relying on computer simulation to suggest when to order. 37. Scheduling should be done on daily basis if the company makes promises in days. 38. The master schedule is the more detailed version of the aggregate plan, usually by end of products or weeks. Match the Following 39. 1] Proximity to market 2] Industrial and labour attitude 3] Legislation and taxation 1] Fragile product 2] Productivity of labour 3] Licenses
6 4] Community Facilities 4] Educational facility 5] Transport facility 6] Safety factor 40. 1] Number of cards 1] Each bin card is specified with the number of items from which total Kanban size can be determined. 2] Lead Time 2] The time to replenish Kanban from its source. 3] Lot Multiplier 3] Use this if it makes sense to replenish material in fixed multiples. 4] Allocation percent 4] Indicates percent distribution of demand for a particular item across multiple locations. 5] Number of days of safety stock you want to maintain. 6] How much material is required each time for replenishment when Kanban is signalled 41. 1] Minimization of production delays 1] Objective of good layout 2] Maximum visibility 2] Principles of good layout 3] Scale model 3] Layout analysis 4] Factor Analysis 4] Method to evaluate layouts 5] Technique for evolving and analysis of layouts 6] Modelling approach to layouts 42. 1] Pure Serviceability 1] Performance to expectation 2] Poor Service 2] Limited capacity for service 3] Turnaround time 3] Increase Responsiveness 4] Efficiency 4] Perform activities well and at the lowest cost 5] Delighted approach 6] Unlimited accessibility to the customers
Program Name: PGDBA Production and Operations Management Assessment Name: POM - Exam Weightage: 70 Total Marks: 70
Program Name: PGDBA Subject: Production and Operations Management Assessment Name: POM - Exam Weightage: 70 Total Marks: 70 Duration: 60 mins Instructions (Start of Assessment): Marks: 70 Time: 60 Minutes
More informationDuration of online examination will be of 1 Hour 20 minutes (80 minutes).
Program Name: SC Subject: Production and Operations Management Assessment Name: POM - Exam Weightage: 70 Total Marks: 70 Duration: 80 mins Online Examination: Online examination is a Computer based examination.
More informationCalculation exercise 1 MRP, JIT, TOC and SOP. Dr Jussi Heikkilä
Calculation exercise 1 MRP, JIT, TOC and SOP Dr Jussi Heikkilä Problem 1: MRP in XYZ Company fixed lot size Item A Period 1 2 3 4 5 6 7 8 9 10 Gross requirements 71 46 49 55 52 47 51 48 56 51 Scheduled
More informationORI 390Q Models and Analysis of Manufacturing Systems First Exam, fall 1994
ORI 90Q Models and Analysis of Manufacturing Systems First Exam, fall 1994 (time, defect rate) (12,0.05) 5 6 V A (16,0.07) (15,0.07) (5,0) M 1 1 2 M1 M2 O A (10,0.1) 7 8 V B (8,0.2) M4 2 4 M5 The figure
More informationForecasting Workbench in PRMS TM. Master Production Schedule. Material Requirements Plan. Work Order/ FPO Maintenance. Soft Bill Maintenance
Forecasting Workbench in PRMS TM SHOP FLOOR CONTROL Work Order/ FPO Maintenance Auto Allocation to Lots Pick Slip Print Master Production Schedule Material Requirements Plan Soft Bill Maintenance Stage
More informationOperation management
Operation management Vigneron Loic December 3, 2008 1 Operations and productivity 1.1 Productivity Productivity = Units produced Imput used Units produced Labor productivity = Labor hours used One resource
More informationIndustrial Processes I Manufacturing Economics
Industrial Processes I Manufacturing Economics Equipment Cost Rate (Example 1) A production machine is purchased for an initial cost plus installation of $500,000. Its anticipated life = 7 yrs. The machine
More informationST. JOSEPH S COLLEGE OF ARTS & SCIENCE (AUTONOMOUS) CUDDALORE-1
ST. JOSEPH S COLLEGE OF ARTS & SCIENCE (AUTONOMOUS) CUDDALORE-1 SUB:OPERATION RESEARCH CLASS: III B.SC SUB CODE:EMT617S SUB INCHARGE:S.JOHNSON SAVARIMUTHU 2 MARKS QUESTIONS 1. Write the general model of
More informationAdvances in Continuous Replenishment Systems. Edmund W. Schuster. Massachusetts Institute of Technology
Advances in Continuous Replenishment Systems Edmund W. Schuster Massachusetts Institute of Technology TRADITIONAL REPLENISHMENT SYSTEM DEMAND FLOW SUPPLIER DISTRIBUTOR WAREHOUSE RETAIL STORES CONSUMER
More informationCoordinated Replenishments at a Single Stocking Point
Chapter 11 Coordinated Replenishments at a Single Stocking Point 11.1 Advantages and Disadvantages of Coordination Advantages of Coordination 1. Savings on unit purchase costs.. Savings on unit transportation
More informationPutting the U.S. Geospatial Services Industry On the Map
Putting the U.S. Geospatial Services Industry On the Map December 2012 Definition of geospatial services and the focus of this economic study Geospatial services Geospatial services industry Allow consumers,
More informationAn Optimal Rotational Cyclic Policy for a Supply Chain System with Imperfect Matching Inventory and JIT Delivery
Proceedings of the 010 International onference on Industrial Engineering and Operations Management Dhaa, Bangladesh, January 9 10, 010 An Optimal Rotational yclic Policy for a Supply hain System with Imperfect
More informationHazard Communication
Hazard Communication For Company: Address: LC-1009 Rev. 06/16 Page 1 Hazard Communication Program Ref: OSHA 1910.1200 Approved by: Title: Ranking Official's Signature Date: Hazard Communication Coordinator
More informationDesign of Cellular Manufacturing Systems for Dynamic and Uncertain Production Requirements with Presence of Routing Flexibility
Design of Cellular Manufacturing Systems for Dynamic and Uncertain Production Requirements with Presence of Routing Flexibility Anan Mungwattana Dissertation submitted to the Faculty of the Virginia Polytechnic
More informationSEXTANT & SEXTANT PE frequently asked questions
SEXTANT & SEXTANT PE frequently asked questions What is SEXTANT? SEXTANT is a software application that helps Financial Executives and Estimators determine their costing and budgeting standards also known
More informationAntti Salonen PPU Le 2: Forecasting 1
- 2017 1 Forecasting Forecasts are critical inputs to business plans, annual plans, and budgets Finance, human resources, marketing, operations, and supply chain managers need forecasts to plan: output
More informationPPU411 Antti Salonen. Forecasting. Forecasting PPU Forecasts are critical inputs to business plans, annual plans, and budgets
- 2017 1 Forecasting Forecasts are critical inputs to business plans, annual plans, and budgets Finance, human resources, marketing, operations, and supply chain managers need forecasts to plan: output
More informationProduction Planning and Control
Production Planning and Control MAERIAL REQUIREMEN PLANNING Haeryip Sihombing BMFP 453 4 Universiti eknikal Malaysia Melaka (UeM) HAERY SIHOMBING First widely available software implementation of a manufacturing
More informationAntti Salonen KPP Le 3: Forecasting KPP227
- 2015 1 Forecasting Forecasts are critical inputs to business plans, annual plans, and budgets Finance, human resources, marketing, operations, and supply chain managers need forecasts to plan: output
More informationM.Sc. (Final) DEGREE EXAMINATION, MAY Final Year. Statistics. Paper I STATISTICAL QUALITY CONTROL. Answer any FIVE questions.
(DMSTT ) M.Sc. (Final) DEGREE EXAMINATION, MAY 0. Final Year Statistics Paper I STATISTICAL QUALITY CONTROL Time : Three hours Maximum : 00 marks Answer any FIVE questions. All questions carry equal marks..
More informationIAA CAT RESPONSE HURRICANE HARVEY. Sealy CAT Yard
IAA CAT RESPONSE HURRICANE HARVEY Sealy CAT Yard 17,600+ KAR Team Members EVERY CATASTROPHE IS DIFFERENT Every catastrophe is different. Timing, intensity, landfall location and population are just a few
More informationDemand Forecasting. for. Microsoft Dynamics 365 for Operations. User Guide. Release 7.1. April 2018
Demand Forecasting for Microsoft Dynamics 365 for Operations User Guide Release 7.1 April 2018 2018 Farsight Solutions Limited All Rights Reserved. Portions copyright Business Forecast Systems, Inc. This
More informationCritical Chain Project Management
Critical Chain Project Management Delivering a high performance result in the engineering design phase of a large capital project, using BIM for the first time Inner Harbour debottlenecking project Nelson
More informationDI CHEM ANALYTICS FOR CHEMICAL MANUFACTURERS
DI CHEM ANALYTICS FOR CHEMICAL MANUFACTURERS How to Identify Opportunities and Expand into the Oilfield Chemicals Market DI Chem Analytics was designed specifically for the oilfield chemicals market. Customer
More informationProject Time Planning. Ahmed Elyamany, PhD
Project Time Planning Ahmed Elyamany, PhD 1 What is Planning The Development of a workable program of operations to accomplish established objectives when put into action. Done before project starts Planning
More informationThe Transportation Problem
CHAPTER 12 The Transportation Problem Basic Concepts 1. Transportation Problem: BASIC CONCEPTS AND FORMULA This type of problem deals with optimization of transportation cost in a distribution scenario
More informationI N J E C T I O N M O U L D I N G F A C T O R Y
I N J E C T I O N M O U L D I N G F A C T O R Y F U T U R E I N S H A P E screw and plug cans with tamper evident closure measuring spoons and beakers thick side cans cans with snap lid C O N T E N T S
More informationProgrammers A B C D Solution:
P a g e Q: A firm has normally distributed forecast of usage with MAD=0 units. It desires a service level, which limits the stock, out to one order cycle per year. Determine Standard Deviation (SD), if
More informationChap 4. Software Reliability
Chap 4. Software Reliability 4.2 Reliability Growth 1. Introduction 2. Reliability Growth Models 3. The Basic Execution Model 4. Calendar Time Computation 5. Reliability Demonstration Testing 1. Introduction
More informationME 418 Quality in Manufacturing ISE Quality Control and Industrial Statistics CHAPTER 07 ACCEPTANCE SAMPLING PLANS.
University of Hail College of Engineering ME 418 Quality in Manufacturing ISE 320 - Quality Control and Industrial Statistics CHAPTER 07 ACCEPTANCE SAMPLING PLANS Professor Mohamed Aichouni http://cutt.us/maichouni
More information2. Linear Programming Problem
. Linear Programming Problem. Introduction to Linear Programming Problem (LPP). When to apply LPP or Requirement for a LPP.3 General form of LPP. Assumptions in LPP. Applications of Linear Programming.6
More informationFood Safety and Quality Management System
Introduction The company has planned, established, documented and implemented a food safety and quality management system for the site, which is maintained in order to continually improve its effectiveness
More informationChapter 13: Forecasting
Chapter 13: Forecasting Assistant Prof. Abed Schokry Operations and Productions Management First Semester 2013-2014 Chapter 13: Learning Outcomes You should be able to: List the elements of a good forecast
More informationFood Safety Management System
Introduction The company has planned, established, documented and implemented a food safety management system for the site, in order to continually improve its effectiveness in accordance with legislation,
More informationOakland County Parks and Recreation GIS Implementation Plan
Oakland County Parks and Recreation GIS Implementation Plan TABLE OF CONTENTS 1.0 Introduction... 3 1.1 What is GIS? 1.2 Purpose 1.3 Background 2.0 Software... 4 2.1 ArcGIS Desktop 2.2 ArcGIS Explorer
More informationAbout Nnergix +2, More than 2,5 GW forecasted. Forecasting in 5 countries. 4 predictive technologies. More than power facilities
About Nnergix +2,5 5 4 +20.000 More than 2,5 GW forecasted Forecasting in 5 countries 4 predictive technologies More than 20.000 power facilities Nnergix s Timeline 2012 First Solar Photovoltaic energy
More informationCP:
Adeng Pustikaningsih, M.Si. Dosen Jurusan Pendidikan Akuntansi Fakultas Ekonomi Universitas Negeri Yogyakarta CP: 08 222 180 1695 Email : adengpustikaningsih@uny.ac.id Operations Management Forecasting
More informationStatistical Quality Control - Stat 3081
Statistical Quality Control - Stat 3081 Awol S. Department of Statistics College of Computing & Informatics Haramaya University Dire Dawa, Ethiopia March 2015 Introduction Industrial Statistics and Quality
More informationManufacturing System Flow Analysis
Manufacturing System Flow Analysis Ronald G. Askin Systems & Industrial Engineering The University of Arizona Tucson, AZ 85721 ron@sie.arizona.edu October 12, 2005 How Many IEs Does It Take to Change a
More informationAdvances in promotional modelling and analytics
Advances in promotional modelling and analytics High School of Economics St. Petersburg 25 May 2016 Nikolaos Kourentzes n.kourentzes@lancaster.ac.uk O u t l i n e 1. What is forecasting? 2. Forecasting,
More informationANALYSIS OF AUTOMATED FLOW LINE & LINE BALANCING
UNIT 3: ANALYSIS OF AUTOMATED FLOW LINE & LINE BALANCING General Terminology & Analysis: There are two problem areas in analysis of automated flow lines which must be addressed: 1. Process Technology 2.
More informationSystems Optimization and Analysis Optimization Project. Labor Planning for a Manufacturing Line
15.066 Systems Optimization and Analysis Optimization Project Labor Planning for a Manufacturing Line Team 1 The Tek Team Lane Ballard Christine Cheung Justin Ging Omur Kaya David Jackson Alyson Naughton
More informationBike Plast DD some remarks
Roberto Cigolini roberto.cigolini@polimi.it Department of Management, Economics and Industrial Engineering Politecnico di Milano 1 Evaluate the analysis carried out by the Plant Director and comment on
More informationChapter 7 Forecasting Demand
Chapter 7 Forecasting Demand Aims of the Chapter After reading this chapter you should be able to do the following: discuss the role of forecasting in inventory management; review different approaches
More informationCorresponding Author: Pradeep Bishnoi
ISSN (e): 2250 3005 Volume, 08 Issue, 6 Jun 2018 International Journal of Computational Engineering Research (IJCER) Minimizing Utilization Time for Specially Structured Two Stage Flow Shop Scheduling
More informationLearning Objectives 15.1 The Acceptance-Sampling Problem
Learning Objectives 5. The Acceptance-Sampling Problem Acceptance sampling plan (ASP): ASP is a specific plan that clearly states the rules for sampling and the associated criteria for acceptance or otherwise.
More informationSCIENCE OCR LEVEL 2 CAMBRIDGE TECHNICAL. Cambridge TECHNICALS CHEMISTRY OF PRODUCTION CERTIFICATE/DIPLOMA IN D/505/3209 LEVEL 2 UNIT 10
Cambridge TECHNICALS OCR LEVEL 2 CAMBRIDGE TECHNICAL CERTIFICATE/DIPLOMA IN SCIENCE CHEMISTRY OF PRODUCTION D/505/3209 LEVEL 2 UNIT 10 GUIDED LEARNING HOURS: 60 UNIT CREDIT VALUE: 10 CHEMISTRY OF PRODUCTION
More informationPROJECT ECONOMIC ANALYSIS
Electricity Transmission Expansion and Supply Improvement Project (RRP NEP 41155) PROJECT ECONOMIC ANALYSIS A. Overview 1. The economic analysis undertaken for the Electricity Transmission and Supply Improvement
More informationLOADS, CUSTOMERS AND REVENUE
EB-00-0 Exhibit K Tab Schedule Page of 0 0 LOADS, CUSTOMERS AND REVENUE The purpose of this evidence is to present the Company s load, customer and distribution revenue forecast for the test year. The
More informationSIMPLICITY AND TECHNOLOGY THE LIASYS CLINICAL CHEMISTRY SYSTEMS FOR PHYSICIAN OFFICE LABORATORIES
SIMPLICITY AND TECHNOLOGY THE LIASYS CLINICAL CHEMISTRY SYSTEMS FOR PHYSICIAN OFFICE LABORATORIES INNOVATIVE AND COST-SAVING TECHNOLOGIES AT YOUR SERVICE DISTRIBUTED BY LIASYS MODELS LIASYS 330 - for POL
More informationBachelor s Degree Programme Operations Research (Valid from 1st January, 2012 to 30th November, 2012.)
AOR-01 ASSIGNMENT BOOKLET Bachelor s Degree Programme Operations Research (Valid from 1st January, 2012 to 30th November, 2012.) It is compulsory to submit the assignment before filling in the exam form.
More informationSpatial Data Availability Energizes Florida s Citizens
NASCIO 2016 Recognition Awards Nomination Spatial Data Availability Energizes Florida s Citizens State of Florida Agency for State Technology & Department of Environmental Protection Category: ICT Innovations
More informationAdvanced Forecast. For MAX TM. Users Manual
Advanced Forecast For MAX TM Users Manual www.maxtoolkit.com Revised: June 24, 2014 Contents Purpose:... 3 Installation... 3 Requirements:... 3 Installer:... 3 Setup: spreadsheet... 4 Setup: External Forecast
More informationEnd-User Gains from Input Characteristics Improvement
End-User Gains from Input Characteristics Improvement David K. Lambert William W. Wilson* Paper presented at the Western Agricultural Economics Association Annual Meetings, Vancouver, British Columbia,
More information1 Introduction. Station Type No. Synoptic/GTS 17 Principal 172 Ordinary 546 Precipitation
Use of Automatic Weather Stations in Ethiopia Dula Shanko National Meteorological Agency(NMA), Addis Ababa, Ethiopia Phone: +251116639662, Mob +251911208024 Fax +251116625292, Email: Du_shanko@yahoo.com
More informationThe Vaisala AUTOSONDE AS41 OPERATIONAL EFFICIENCY AND RELIABILITY TO A TOTALLY NEW LEVEL.
The Vaisala AUTOSONDE AS41 OPERATIONAL EFFICIENCY AND RELIABILITY TO A TOTALLY NEW LEVEL. Weather Data Benefit For Society The four most important things about weather prediction are quality, reliability,
More information. Introduction to CPM / PERT Techniques. Applications of CPM / PERT. Basic Steps in PERT / CPM. Frame work of PERT/CPM. Network Diagram Representation. Rules for Drawing Network Diagrams. Common Errors
More informationOregon Department of Transportation. Geographic Information Systems Strategic Plan
Oregon Department of Transportation Geographic Information Systems Strategic Plan Adopted May, 2000 By the GIS Steering Committee Last printed 10/2/2012 4:20:00 PM Page Geographic Information Systems Strategic
More informationIE 316 Exam 1 Fall 2011
IE 316 Exam 1 Fall 2011 I have neither given nor received unauthorized assistance on this exam. Name Signed Date Name Printed 1 1. Suppose the actual diameters x in a batch of steel cylinders are normally
More informationSHORT TERM LOAD FORECASTING
Indian Institute of Technology Kanpur (IITK) and Indian Energy Exchange (IEX) are delighted to announce Training Program on "Power Procurement Strategy and Power Exchanges" 28-30 July, 2014 SHORT TERM
More informationPROJECT PROFILE ON THE ESTABLISHMENT OF RECREATIONAL CENTER
Investment Office ANRS PROJECT PROFILE ON THE ESTABLISHMENT OF RECREATIONAL CENTER Development Studies Associates (DSA) October 2008 Addis Ababa Table of Contents 1. Executive Summary...1 2. Service Description
More informationIntegrating Quality and Inspection for the Optimal Lot-sizing Problem with Rework, Minimal Repair and Inspection Time
Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, January 22 24, 2011 Integrating Quality and Inspection for the Optimal Lot-sizing
More informationMaterial and Capacity Requirements Planning with dynamic lead times.
Material and Capacity Requirements Planning with dynamic lead times. Herbert Jodlbauer, Sonja Reitner To cite this version: Herbert Jodlbauer, Sonja Reitner. Material and Capacity Requirements Planning
More informationCHAPTER-3 MULTI-OBJECTIVE SUPPLY CHAIN NETWORK PROBLEM
CHAPTER-3 MULTI-OBJECTIVE SUPPLY CHAIN NETWORK PROBLEM 3.1 Introduction A supply chain consists of parties involved, directly or indirectly, in fulfilling customer s request. The supply chain includes
More informationWorking with Rumaila's Supply Chain
Working with Rumaila's Supply Chain 2 3 With a heritage of over half a century of continued oil and gas production, Rumaila's vast resources makes it comparable with the very largest producing fields in
More informationProcess Performance and Quality
Chapter 5 Process Performance and Quality Evaluating Process Performance Identify opportunity 1 Define scope 2 Document process 3 Figure 5.1 Implement changes 6 Redesign process 5 Evaluate performance
More informationCHARTING SPATIAL BUSINESS TRANSFORMATION
CHARTING SPATIAL BUSINESS TRANSFORMATION An in-depth look at the business patterns of GIS and location intelligence adoption in the private sector EXECUTIVE SUMMARY The global use of geographic information
More informationAsset Management Planning. GIS and Asset Management Integration Readiness Assessment
Asset Management Planning GIS and Asset Management Integration Readiness Assessment With too little data, you won t be able to make any conclusions that you trust. With loads of data you will find relationships
More informationProject Plan for the City of Philadelphia Pole and Pole Attachment Geodatabase Design Project
Project Plan for the City of Philadelphia Pole and Pole Attachment Geodatabase Design Project Project Overview: The City of Philadelphia is experiencing data integrity problems caused by data format issues.
More informationStatistical quality control (SQC)
Statistical quality control (SQC) The application of statistical techniques to measure and evaluate the quality of a product, service, or process. Two basic categories: I. Statistical process control (SPC):
More informationRelations and Functions
Lesson 5.1 Objectives Identify the domain and range of a relation. Write a rule for a sequence of numbers. Determine if a relation is a function. Relations and Functions You can estimate the distance of
More informationCopyright ENCO Laboratories, Inc. II. Quality Control. A. Introduction
II. Quality Control A. Introduction ENCO adheres to strict quality control practices in order to assure our clients that the data provided are accurate and reliable. We are required by the EPA to analyze
More informationLINEAR PROGRAMMING MODULE Part 1 - Model Formulation INTRODUCTION
Name: LINEAR PROGRAMMING MODULE Part 1 - Model Formulation INTRODUCTION In general, a mathematical model is either deterministic or probabilistic. For example, the models and algorithms shown in the Graph-Optimization
More informationSIMATIC Ident Industrial Identification Systems
Related catalogs SIMATIC Ident Industrial Identification Systems Catalog ID 10 2012 Introduction System overview SIMATIC Ident 1 RFID systems for the HF frequency range SIMATIC RF200 SIMATIC RF300 MOBY
More informationHAZARD COMMUNICATION SAFETY PROGRAM
Hazard Communication Program HAZARD COMMUNICATION SAFETY PROGRAM 1. Purpose. To provide an effective, written hazard communication program in compliance with company, State and Federal regulatory requirements.
More informationA New Approximate Evaluation Method for Two-Echelon Inventory Systems with Emergency Shipments
A New Approximate Evaluation Method for Two-Echelon Inventory Systems with Emergency Shipments Erhun Özkan, Geert-Jan van Houtum, Yasemin Serin Beta Working Paper series 363 BETA publicatie WP 363 (working
More informationMaanmittauspäivät 2018 Helsinki Maanmittauspäivät 2018 The Danish initiatives regarding open and free basic data including effect studies
Maanmittauspäivät 2018 The Danish initiatives regarding open and free basic data including effect studies 22.03.2018 Agenda 1. Intro overall frame / selfie 2. Data Infrastructure 3. The Danish Digital
More informationVOYAGE (PASSAGE) PLANNING
VOYAGE (PASSAGE) PLANNING Introduction O Passage planning or voyage planning is a procedure of developing a complete description of a vessel's voyage from start to finish. O Production of a passage plan
More informationAssistant Prof. Abed Schokry. Operations and Productions Management. First Semester
Chapter 3 Forecasting Assistant Prof. Abed Schokry Operations and Productions Management First Semester 2010 2011 Chapter 3: Learning Outcomes You should be able to: List the elements of a good forecast
More informationSkills Standards LABORATORY ASSISTANT OD48201
Skills Standards LABORATORY ASSISTANT OD48201 COMPETENCY-BASED EDUCATION: OKLAHOMA S RECIPE FOR SUCCESS BY THE INDUSTRY FOR THE INDUSTRY Oklahoma s CareerTech system of competency-based education uses
More informationCHAPTER 22 GEOGRAPHIC INFORMATION SYSTEMS
CHAPTER 22 GEOGRAPHIC INFORMATION SYSTEMS PURPOSE: This chapter establishes the administration and use of to improve the quality and accessibility of Department s spatial information and support graphical
More informationI Time Allowed : Three Hours I I Maximum Marks
セ G@.. M セエ @ STATISTICS D-GT-M-TTB Paper-11 I Time Allowed : Three Hours I I Maximum Marks 200 I INSTRUCTIONS Candidates should attempt Question Nos. 1 and 5 which are compulsory, and any THREE of the
More informationChapter 8 - Forecasting
Chapter 8 - Forecasting Operations Management by R. Dan Reid & Nada R. Sanders 4th Edition Wiley 2010 Wiley 2010 1 Learning Objectives Identify Principles of Forecasting Explain the steps in the forecasting
More informationInfrared thermography as a tool to elaborate procedures for predictive maintenance of ball mills equipment
14 th Quantitative InfraRed Thermography Conference Infrared thermography as a tool to elaborate procedures for predictive maintenance of ball mills equipment by R. Władysiak*, T. Pacyniak* * Lodz University
More informationSupply planning optimization for linear production system with stochastic lead-times and quality control
Supply planning optimization for linear production system with stochastic lead-times and quality control O Ben Ammar, B Bettayeb, Alexandre Dolgui To cite this version: O Ben Ammar, B Bettayeb, Alexandre
More information2 Functions and Their
CHAPTER Functions and Their Applications Chapter Outline Introduction The Concept of a Function Types of Functions Roots (Zeros) of a Function Some Useful Functions in Business and Economics Equilibrium
More informationMechanical Engineering 101
Mechanical Engineering 101 University of alifornia, Berkeley Lecture #16 1 Today s lecture MRP scheduling LFL EOQ/EMQ POQ apacity planning 2 Formulae I it max{ 0, I i t 1 SR GR, it it } NR it max 0, GR
More informationScheduling I. Today. Next Time. ! Introduction to scheduling! Classical algorithms. ! Advanced topics on scheduling
Scheduling I Today! Introduction to scheduling! Classical algorithms Next Time! Advanced topics on scheduling Scheduling out there! You are the manager of a supermarket (ok, things don t always turn out
More informationPBW 654 Applied Statistics - I Urban Operations Research
PBW 654 Applied Statistics - I Urban Operations Research Lecture 2.I Queuing Systems An Introduction Operations Research Models Deterministic Models Linear Programming Integer Programming Network Optimization
More informationSAMPLE PAGES. Hazard Communication Program. [Company name]
The safety and health of our employees are our top priority. Everyone goes home safe and healthy everyday. Hazard Communication Program [Company name] [Date Authorized] [Version} Page 0 Table of Contents
More informationUsing Minitab to construct Attribute charts Control Chart
Using Minitab to construct Attribute charts Control Chart Attribute Control Chart Attribute control charts are the charts that plot nonconformities (defects) or nonconforming units (defectives). A nonconformity
More informationLecture 4 Forecasting
King Saud University College of Computer & Information Sciences IS 466 Decision Support Systems Lecture 4 Forecasting Dr. Mourad YKHLEF The slides content is derived and adopted from many references Outline
More informationHAZARD COMMUNICATION PROGRAM
HAZARD COMMUNICATION PROGRAM UNIVERSITY RISK MANAGEMENT Occupational Safety and Health Programs 19 Hagood Avenue, Suite 908 Charleston SC 29425 843-792-3604 Revised: January, 2015 TABLE OF CONTENTS Safety
More informationRESOLUTION NO
RESOLUTION NO. 09-2017 Adopting Job Descriptions for Engineering and GIS Manager and GIS Analyst and Amending the Pay Resolution to Accommodate Said Positions and Amending the Staffing Chart to Accommodate
More informationEC611--Managerial Economics
EC611--Managerial Economics Optimization Techniques and New Management Tools Dr. Savvas C Savvides, European University Cyprus Models and Data Model a framework based on simplifying assumptions it helps
More informationEnabling Success in Enterprise Asset Management: Case Study for Developing and Integrating GIS with CMMS for a Large WWTP
Enabling Success in Enterprise Asset Management: Case Study for Developing and Integrating GIS with CMMS for a Large WWTP Allison Blake, P.E. 1*, Matthew Jalbert, P.E. 2, Julia J. Hunt, P.E. 2, Mazen Kawasmi,
More informationExercises Stochastic Performance Modelling. Hamilton Institute, Summer 2010
Exercises Stochastic Performance Modelling Hamilton Institute, Summer Instruction Exercise Let X be a non-negative random variable with E[X ]
More informationBryco Machine Welcomes SME and AME. October 1, 2008
Bryco Machine Welcomes SME and AME October 1, 2008 2008 Type of Shop Leading precision machining contract manufacturer Manufacturer of complex parts that require state-of-the-art equipment and high level
More informationPlanning Softproviding Meat User Documentation
Great ideas are always simple Softproviding simply makes them happen. Planning Softproviding Meat User Documentation Version: 1.00 Date: 24 August 2017 Release: v5.50 Softproviding AG Riehenring 175 CH-4058
More informationOrbital Insight Energy: Oil Storage v5.1 Methodologies & Data Documentation
Orbital Insight Energy: Oil Storage v5.1 Methodologies & Data Documentation Overview and Summary Orbital Insight Global Oil Storage leverages commercial satellite imagery, proprietary computer vision algorithms,
More information