Planning Softproviding Meat User Documentation

Size: px
Start display at page:

Download "Planning Softproviding Meat User Documentation"

Transcription

1 Great ideas are always simple Softproviding simply makes them happen. Planning Softproviding Meat User Documentation

2 Version: 1.00 Date: 24 August 2017 Release: v5.50 Softproviding AG Riehenring 175 CH-4058 Basel Switzerland +41 (0) SAP + Softproviding + YOU. Leading the field.

3 Contents 1 MRP Meat Management Overview Prerequisites Creating the MRP Plan Planning Data Steps Process Category: Further Processing Process Category: Disassembly Process Category: Other Processing (Customer-Specific Processing) Changing an MRP Plan Planning Data Steps Displaying an MRP Plan Executing the MRP Run Selection Variants Processing Variants Foreground Processing Background Processing Processing Log Displaying the MRP Run Run Data Parameters Steps Documenting/Saving the Data 22 3/22

4 1 MRP Meat Management MRP Meat Management Softproviding Meat User Documentation 4/22

5 1.1 Overview The programs MRP Plan and MRP Run described in this document are provided by Softproviding AG as part of the Meat Management by Softproviding solution. They complement the existing SAP ERP planning. Material requirements planning (MRP) is carried out exclusively with regard to BOMs. Meat Management by Softproviding enhances the existing processes with disassembly processes which typically requires one extra planning step. This planning step is done with MRP Calculation in Meat Management by Softproviding. The use of SAP MRP requires separate planning runs. The example below shows the classic demanddriven planning (pull planning) which represents livestock production, further processing and disassembly processes. Each of these processes requires a planning run of its own. SAP MRP: Further Processing Processing Packaging Softproviding Meat MRP Calculation: Disassembly Slaughtering Primal cutting Deboning SAP MRP: Livestock Production Breeding/hatchery Fattening Note For further information on MRP Calculation see the MRP Calculation section in the Disassembly documentation. The Meat Management MRP Plan allows you to perform one combined planning run for disassembly and further processing. Take note that the plans are plant-dependent. Linking the individual steps allows you to represent and plan different variants of process chains. They are linked by using the components/products in the BOMs and cut lists. MRP Meat Management Softproviding Meat User Documentation 5/22

6 Example for a process chain Packaging Disassembly Breeding / Livestock Production Representation of MRP plan Breast Breast Breast Chick Chicken breast Cl. A, packaged Tray Foil Drumstick Wing Chicken 1.2 kg Starter Finisher Back This linking is done in MRP Plan and saved as a variant. The respective steps are described in detail further down. The Meat Management MRP Run makes use of the necessary parameters and functions in the SAP ERP planning run (transactions MD01/MD02) thus rendering a separate SAP MRP planning run redundant. Note For further information on the parameters and use of the SAP MRP planning run see the respective SAP documentation. The topic will not be dealt with in detail in this document. MRP Meat Management Softproviding Meat User Documentation 6/22

7 1.2 Prerequisites In order to maintain and use MRP Plan, the following parameters must configured in Softproviding Meat: Other MRP step categories Number range for the MRP run number Other MRP step categories are implemented in connection with BAdI /SPMEAT/BADI_AP_RUN_- STE. This function is provided for customer-specific adjustments. For detailed information please see the Disassembly configuration guide. MRP Meat Management Softproviding Meat User Documentation 7/22

8 1.3 Creating the MRP Plan SAP Menu Transaction Code Softproviding Meat > Production > Material Requirements Planning > Planning Tool > MRP Plan > Create /SPMEAT/APDA Procedure In an initial step the plan is created to define the general condition. Mandatory fields are available for data entry in the initial screen: Field Name MRP Plan Plant Description External data entry field where a name for the plan (10 characters) is specified. This field may no longer be changed later on. Organizational unit in which this plan and the assigned materials are planned and produced. Once you confirmed your entries with the Enter key the program switches to the assignment screen. Example for an entry screen The screen is composed of the following areas (in vertical order): MRP Meat Management Softproviding Meat User Documentation 8/22

9 1.3.1 Planning Data Field Name MRP Plan MRP Plan description Plant Stock type Valid from/to Description Name of the plan given in the entry screen. This field cannot be changed. Entry field, 40 characters. May be changed. Organizational unit in which this plan and the assigned materials are planned and produced. This value is copied from the entry screen. A stock type is a specific type of animal, for example, pigs, cattle, turkeys, sheep. Validity period for this plan if required. The system will automatically fill these fields with today s date and The planning data are the header data of the MRP plan. Here, the basic conditions for the plan are defined. The stock type is used as characteristic in order to be able to link it with the cut lists. In the cut lists the stock type is a basic characteristic on which plausibility checks are made. The validity-from/to dates may be used to specify validity intervals to those in BOMs and price conditions. If a MRP plan is no longer needed, the valid-to date is set to today s date and then saved Steps The process chain is modeled via steps. Each step represents a process step in Planning and determines the sequence for planning. The numbering is (as with BOMs) specified by the system. The process is determined by means of an MRP process category. The following process categories are available: (M) Further processing (T) Disassembly process (Z) Other processing (customer-specific processing) Depending on the process the planning objects are created and controlled: In further processing requirements are created and processed via SAP MRP run. In disassembly processes requirements are imported and processed. In other processing the behavior needs to be defined according to customer requests. At the bottom of the screen there is a navigation bar. Selecting the respective process category will open additional data fields according to the process category chosen which need to be maintained for this process step. MRP Meat Management Softproviding Meat User Documentation 9/22

10 Process Category: Further Processing When this process is created the following fields are made available for editing: Field Name Description Features Step Description MRP process category Material MRP area Planning scenario Sequential number allocated by the system (10, 20, etc.) Description of the planning step. Is also used as short text for the created MRP calculation. Category of the process (further processing, disassembly process, or other process). Material number of the product / semi-product which is being planned and produced. Number of the MRP area for which a separate requirements planning is to be carried out. Key, identifying the planning scenario (e.g. of long-term planning). System field, no data entry possible Free text with 40 characters List box Alpha-numeric key, entry field List box List box Since in connection with further processing an SAP MRP run is created, the following parameters need to be defined: Field Name Description Features Multi-level planning Also plan unchanged components Use creation indicator from MRP group Processing type Create purchase requisition Schedule lines This indicator controls whether the planning Check box to activate the for a material is to be carried out in one step or function in multiple steps. If this indicator is set, all components in the BOM are planned regardless of whether any changes which are relevant to planning actually were made to the components. This indicator determines whether to include the indicators from the planning parameters from the current application or from the MRP group for the planning of the material. Determines the processing for the MRP run: N Net change for total horizon P Net change for planning horizon G Regenerative planning Determines how the system is to proceed for externally procured material: 1 Purchase requisition 2 Purchase requisition in opening period 3 Planned orders This indicator controls whether the system, creates a schedule line during the planning run: 1 No schedule lines Check box to activate the function Check box to activate the function List box, default value is blank List box, default value is blank List box, default value is blank MRP Meat Management Softproviding Meat User Documentation 10/22

11 Create MRP list Planning mode Scheduling Include firm planned orders 2 Schedule lines in the opening period 3 Schedule lines This indicator controls whether the system will create an MRP list: 1 MRP list 2 Depending on the exception messages 3 No MRP list Specifies how to treat the requirement proposals from the last planning run: 1 Adapt planning data 2 Re-explode BOM and routing 3 Delete and recreate planning data List box, default value is blank List box, default value is blank Sets whether to determine basic dates for List box, default value is planned orders or whether to carry out additional lead time scheduling. blank The indicator refers to all planned orders hat are new or that were changed or for which the BOM was re-exploded. This indicator controls whether firm planned List box, default value is orders from operative planning are to be copied to long-term planning: blank 1 Use settings in planning scenario 2 Copy firm planned orders from operative planning 3 Do not copy firm planned orders from operative planning Note For information on the application possibilities of the individual characteristics in material requirements planning (MRP) see the respective documents Process Category: Disassembly The following fields are available for data entry when the process is created: Field Name Description Features Step Description MRP process category Sequential number allocated by the system (10, 20, etc.) Description of the planning step. Is also used as short text for the created MRP calculation. Category of the process (further processing, disassembly process, or other process). System field, no data entry possible Free text with 40 characters List box MRP Meat Management Softproviding Meat User Documentation 11/22

12 Cut list Material Stock determination Requirements determination Selection rule The cut list is the topmost organizational unit in Disassembly. It consists of n cuts and represents the entire disassembly for a certain stock type. Material number of the component (disassembly material) to be cut. In MRP Calculation, various stock determination are available for stock determination (available quantity on key date, or current quantity (key date-independent)). This setting is required if in MRP Calculation you want to import material requirements from the current stock/requirements list (MD04) for the specified key date. A selection rule is a combination of certain time information, planning elements an stocks in a rule which controls the importing of this data into the current stock /requirements list and the repetitive manufacturing planning table: Note For detailed information see the MRP Calculation section in the Disassembly user documentation Process Category: Other Processing (Customer-Specific Processing) The following fields are available for data entry when the process is created: Field Name Description Features Step Description MRP process category Step category Result Sequential number allocated by the system (10, 20, etc.) Description of the planning step. Is also used as short text for the created MRP calculation. Category of the process (further processing, disassembly process, or other process). Customer-specific step in MRP Plan/Run. This requires that a BAdI is implemented. System field, no data entry possible Free text with 40 characters List box List box, entry field with plausibility check You may create any number of steps and processes in one plan. When the transaction is saved the MRP Plan is created and is available for changing or displaying. MRP Meat Management Softproviding Meat User Documentation 12/22

13 Example for an MRP plan with breeding process (sales-oriented planning) Packaging Disassembly Breeding / Livestock Production Example for an MRP plan without breeding process Packaging Disassembly MRP Meat Management Softproviding Meat User Documentation 13/22

14 1.4 Changing an MRP Plan SAP Menu Softproviding Meat > Production > Material Requirements Planning > Planning Tool > MRP Plan > Change Transaction Code /SPMEAT/APDB The initial screen features a data entry field with input help for the MRP plan to be edited. Selecting the Enter key will take you to the detail view. The data available for editing typically have a white background and may be selected by means of the TAB key. Depending on the level (overview data / detail data), additional fields are made available for changing Planning Data In this area the following data fields may be changed: MRP plan description Stock type Valid from/to The selection name (MRP plan) and the plant cannot be changed. Where necessary, a new plan must be created. The old plan may be marked das obsolete by restricting the validity period accordingly Steps In order to change the steps or the details stored in them, the desired step is selected by doubleclicking in the respective row. The selected step is identified by an arrow in the leftmost column. The following data may be changed in the step overview: The step number in order to change the sequence The step description All other data may be changed in the detail view in the right-hand screen area. The step category (further processing, disassembly process) cannot be changed and must be completely deleted. In order to do so, select the step by double-clicking and push the Delete step button in the navigation bar. After this you may add steps or change the sequence any time. Selecting the Save button will save your changes and end the program. MRP Meat Management Softproviding Meat User Documentation 14/22

15 1.5 Displaying an MRP Plan SAP Menu Softproviding Meat > Production > Material Requirements Planning > Planning Tool > MRP Plan > Display Transaction Code /SPMEAT/APDC Enter the MRP plan to display in the initial screen and start the program by hitting the Enter key. This mode does not allow you to change any data. To exit the program, select the standard navigation bar or by hitting the Escape key. icon in the SAP MRP Meat Management Softproviding Meat User Documentation 15/22

16 1.6 Executing the MRP Run SAP Menu Softproviding Meat > Production > Material Requirements Planning > Planning Tool > MRP Run > Execute Transaction Code /SPMEAT/APRA When the Meat Management MRP run is used, the SAP ERP MRP Planning Run (transaction MD01/MD02) and the Meat Management MRP Calculation (/SPMEAT/CLP*) are combined and executed. Separate planning runs for the materials allocated in the MRP plans are not necessary Selection Variants In the initial screen the following fields are available for data entry: Field Name Description Features MRP Plan Name of the plan Mandatory field, input help available Planning date Basic start date Basic finish date Key date Display log Date for which the planning run is to be executed. Typically, this is today s date. Basic start date. Relevant for the disassembly process settings. Basic finish date. Relevant for the disassembly process settings. Relevant for the disassembly process settings. This date is used for stock determination type available quantity on key date (MRP Calculation). If this indicator is active, a log is created and displayed when the MRP run is executed. The parameters which are used may be saved as selection variants. Entry field, relevant for further processing Entry field, today s date is proposed Entry field, today s date is proposed Entry field, today s date is proposed Check box to activate the function Note The variant function offers you the option of saving data entered into programs as variants. This is particularly useful for programs that are frequently started up with identical restrictions. This means that you do not need to enter the same values every time you start the program. When you select the variant, the fields that are already populated with data are used when the program starts. Any number of variants can be created for each program. After a program starts, input fields are displayed. When you have entered the parameters you want, you can save them by clicking on the Save as variant button. After adding a variant name and a description and entering data in other fields or highlighting them, you can save your entries. By choosing the Goto > Variant menu option, you can display, modify and delete existing variants. MRP Meat Management Softproviding Meat User Documentation 16/22

17 Click on the User documentation button or access the SAP online help to obtain more information about using variants Processing Variants The program may be executed in the foreground (online) or via a background job (offline). The respective function may be found in the SAP ERP navigation bar Foreground Processing Foreground processing is carried out by entering the parameters and selecting the Execute button. The executed planning run is documented by means of an MRP run number. If the Display log indicator in the initial screen was set, the program now changes to the log display view. After processing has been successfully carried out the message Planning run completed is displayed at the bottom of the screen Background Processing With the necessary parameters the MRP run may be carried out as a background job. The settings and intervals of the times of execution must be defined per project. The job is documented via the SAP ERP job management. The overview is the place where the executed job is displayed and the planning runs/documents created in the background are logged. Note The job overview is used to manage jobs and is the central area for running a variety of job monitoring and management tasks, such as searching, scheduling, repeating, cancelling and deleting jobs, checking the job status and displaying job reports. The job overview can be accessed using transaction SM37. See the relevant SAP standard system documentation for more information about the extensive job overview options Processing Log The processing log is created if the Display log field in the initial screen was activated. The log display consists of the following components: Navigation bar Overview Detail view MRP Meat Management Softproviding Meat User Documentation 17/22

18 The navigation bar features the following functions: Navigation Bar Icons Description Detailed information on the documented steps Long text for the message Technical information for the message Application help The overview shows information on the planning run carried out. A log entry is created per created step, and the following results are documented: For further processing steps: the planned material or the material to be produced (BOM header material) For disassembly process steps: the MRP calculation number and any planning order that might have been created If you double-click on the rows, additional information will be displayed in the detail view. Also, confirmations in the form of message categories are output. Depending on the specifications made there are the following message categories: Message Category Red Yellow Green Description Error, termination, order creation not successful Notification, no termination, order creation successful (possibly with restrictions!). No notification, Order creation successful. The log may be further edited with the familiar SAP standard functionalities. The following function buttons are available: Button Function Description Technical information Detailed technical information for the message. notification Sort descending/ascending Find tool Find next Filter Total/subtotal Print Views Export Sorts the list content in descending or ascending order. Search function with which values may be determined. Function with which to search again. Filter function. By means of the field list the user may define any column content to display certain data. Standard function for the totaling of values. This function is not active for this log category. Outputs the log on a printer. Standard view is the grid format. Switching view to list output or Microsoft Excel is possible. Data may exported to different variants: to a local file, sending per /communicator, saving to an Office file, or HTML download. MRP Meat Management Softproviding Meat User Documentation 18/22

19 Button Function Description Change layout Termination Error Warning Information Changing layouts, defining of display variants. The number of terminations for the program run may be displayed. The number of error messages may be displayed. The number of warning messages may be displayed. The number of information messages may be displayed. Note For further information please see the SAP ERP documentation on logs. MRP Meat Management Softproviding Meat User Documentation 19/22

20 1.7 Displaying the MRP Run SAP Menu Softproviding Meat > Production > Material Requirements Planning > Planning Tool > MRP Run > Display Transaction Code /SPMEAT/APRC In the initial screen, the number of the MRP run created last is proposed. The user may enter or select via the input help a different number. Additional functions for the detail view are available in this run. If the user is authorized to use this transaction, he/she may jump to the respective program. The MRP run display screen consists of the following components: Header area with run data Parameters Steps Note Data cannot be changed. I necessary a new MRP run must be created Run Data The run data contain information on the execution of the MRP run and the user. Field Name MRP run Run type User Start End Description Number of the MRP run Processing type for the run (foreground or background) User ID and name of the SAP creating the run Date and time of execution Date and time of the ending Furthermore, the user may switch to the log by selecting the run log button. The User button may be used to call the user s contact data, if maintained Parameters The data listed here correspond to the values specified in the MRP plan. Field Name MRP Plan Plant Description Name of the plan given in the entry screen. This field cannot be changed. Organizational unit in which this plan and the assigned materials are planned and produced. This value is copied from the entry screen. MRP Meat Management Softproviding Meat User Documentation 20/22

21 Stock type MRP date Basic start date Basic finish date Key date A stock type is a specific type of animal, for example, pigs, cattle, turkeys, sheep. This field is filled if a date was specified. Typically this is today s date. Basic start date. Relevant for the disassembly process settings. Basic finish date. Relevant for the disassembly process settings. Relevant for the disassembly process settings. This date is used for stock determination type available quantity on key date (MRP Calculation) Steps In the Steps tab the details per step may be displayed by double-clicking. Successful execution is indicated by a checkered flag icon. From the details the user may jump to the following further functions: MRP Step Category Further processing Disassembly process Further Functions Stock and requirements list for displaying the planned orders (transaction MD04). Displaying the MRP calculation Displaying the disassembly inbound view Displaying the disassembly outbound view The created MRP calculation is displayed with the parameters defined in the MRP plan. MRP Meat Management Softproviding Meat User Documentation 21/22

22 1.8 Documenting/Saving the Data All data created in connection with MRP Plan and MRP run are documented or saved in the following Meat Management tables: SPMEAT/APDK MRP Plan (header) SPMEAT/APDKT MRP Plan (short text) SPMEAT/APDP MRP Plan (step) SPMEAT/APRK MRP Run (header) SPMEAT/APRP MRP Run (step) MRP Meat Management Softproviding Meat User Documentation 22/22

M E R C E R W I N WA L K T H R O U G H

M E R C E R W I N WA L K T H R O U G H H E A L T H W E A L T H C A R E E R WA L K T H R O U G H C L I E N T S O L U T I O N S T E A M T A B L E O F C O N T E N T 1. Login to the Tool 2 2. Published reports... 7 3. Select Results Criteria...

More information

ON SITE SYSTEMS Chemical Safety Assistant

ON SITE SYSTEMS Chemical Safety Assistant ON SITE SYSTEMS Chemical Safety Assistant CS ASSISTANT WEB USERS MANUAL On Site Systems 23 N. Gore Ave. Suite 200 St. Louis, MO 63119 Phone 314-963-9934 Fax 314-963-9281 Table of Contents INTRODUCTION

More information

PP - Work Centers HELP.PPBDWKC. Release 4.6C

PP - Work Centers HELP.PPBDWKC. Release 4.6C HELP.PPBDWKC Release 4.6C SAP AG Copyright Copyright 2001 SAP AG. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission

More information

Advanced Forecast. For MAX TM. Users Manual

Advanced Forecast. For MAX TM. Users Manual Advanced Forecast For MAX TM Users Manual www.maxtoolkit.com Revised: June 24, 2014 Contents Purpose:... 3 Installation... 3 Requirements:... 3 Installer:... 3 Setup: spreadsheet... 4 Setup: External Forecast

More information

JOB REQUESTS C H A P T E R 3. Overview. Objectives

JOB REQUESTS C H A P T E R 3. Overview. Objectives C H A P T E R 3 JOB REQUESTS Overview Objectives Job Requests is one of the most critical areas of payroll processing. This is where the user can enter, update, and view information regarding an employee

More information

Accountability. User Guide

Accountability. User Guide Accountability User Guide The information in this document is subject to change without notice and does not represent a commitment on the part of Horizon. The software described in this document is furnished

More information

Lightcloud Application

Lightcloud Application Controlling Your Lightcloud System Lightcloud Application Lightcloud Application Navigating the Application Devices Device Settings Organize Control Energy Scenes Schedules Demand Response Power Up State

More information

How to Make or Plot a Graph or Chart in Excel

How to Make or Plot a Graph or Chart in Excel This is a complete video tutorial on How to Make or Plot a Graph or Chart in Excel. To make complex chart like Gantt Chart, you have know the basic principles of making a chart. Though I have used Excel

More information

Computer Complaints. Management System [CCMS] User Manual. This user Manual describes with Screen Shots the features and functionalities of CCMS

Computer Complaints. Management System [CCMS] User Manual. This user Manual describes with Screen Shots the features and functionalities of CCMS Computer Complaints Management System [CCMS] User Manual 2013 This user Manual describes with Screen Shots the features and functionalities of CCMS High Court of Karnataka Computer Main Center Office Ph

More information

Demand Forecasting. for. Microsoft Dynamics 365 for Operations. User Guide. Release 7.1. April 2018

Demand Forecasting. for. Microsoft Dynamics 365 for Operations. User Guide. Release 7.1. April 2018 Demand Forecasting for Microsoft Dynamics 365 for Operations User Guide Release 7.1 April 2018 2018 Farsight Solutions Limited All Rights Reserved. Portions copyright Business Forecast Systems, Inc. This

More information

NEW HOLLAND IH AUSTRALIA. Machinery Market Information and Forecasting Portal *** Dealer User Guide Released August 2013 ***

NEW HOLLAND IH AUSTRALIA. Machinery Market Information and Forecasting Portal *** Dealer User Guide Released August 2013 *** NEW HOLLAND IH AUSTRALIA Machinery Market Information and Forecasting Portal *** Dealer User Guide Released August 2013 *** www.cnhportal.agriview.com.au Contents INTRODUCTION... 5 REQUIREMENTS... 6 NAVIGATION...

More information

Please click the link below to view the YouTube video offering guidance to purchasers:

Please click the link below to view the YouTube video offering guidance to purchasers: Guide Contents: Video Guide What is Quick Quote? Quick Quote Access Levels Your Quick Quote Control Panel How do I create a Quick Quote? How do I Distribute a Quick Quote? How do I Add Suppliers to a Quick

More information

ncounter PlexSet Data Analysis Guidelines

ncounter PlexSet Data Analysis Guidelines ncounter PlexSet Data Analysis Guidelines NanoString Technologies, Inc. 530 airview Ave North Seattle, Washington 98109 USA Telephone: 206.378.6266 888.358.6266 E-mail: info@nanostring.com Molecules That

More information

OECD QSAR Toolbox v.4.0. Tutorial on how to predict Skin sensitization potential taking into account alert performance

OECD QSAR Toolbox v.4.0. Tutorial on how to predict Skin sensitization potential taking into account alert performance OECD QSAR Toolbox v.4.0 Tutorial on how to predict Skin sensitization potential taking into account alert performance Outlook Background Objectives Specific Aims Read across and analogue approach The exercise

More information

REPLACE DAMAGED OR MISSING TEXTBOOK BARCODE LABEL

REPLACE DAMAGED OR MISSING TEXTBOOK BARCODE LABEL Destiny Textbook Manager allows users to create and print replacement barcode labels for textbooks. In this tutorial you will learn how to: Replace damaged textbook barcode label(s) Replace missing textbook

More information

Using the Budget Features in Quicken 2008

Using the Budget Features in Quicken 2008 Using the Budget Features in Quicken 2008 Quicken budgets can be used to summarize expected income and expenses for planning purposes. The budget can later be used in comparisons to actual income and expenses

More information

Mass Asset Additions. Overview. Effective mm/dd/yy Page 1 of 47 Rev 1. Copyright Oracle, All rights reserved.

Mass Asset Additions.  Overview. Effective mm/dd/yy Page 1 of 47 Rev 1. Copyright Oracle, All rights reserved. Overview Effective mm/dd/yy Page 1 of 47 Rev 1 System References None Distribution Oracle Assets Job Title * Ownership The Job Title [list@yourcompany.com?subject=eduxxxxx] is responsible for ensuring

More information

mylab: Chemical Safety Module Last Updated: January 19, 2018

mylab: Chemical Safety Module Last Updated: January 19, 2018 : Chemical Safety Module Contents Introduction... 1 Getting started... 1 Login... 1 Receiving Items from MMP Order... 3 Inventory... 4 Show me Chemicals where... 4 Items Received on... 5 All Items... 5

More information

OECD QSAR Toolbox v.4.1. Tutorial on how to predict Skin sensitization potential taking into account alert performance

OECD QSAR Toolbox v.4.1. Tutorial on how to predict Skin sensitization potential taking into account alert performance OECD QSAR Toolbox v.4.1 Tutorial on how to predict Skin sensitization potential taking into account alert performance Outlook Background Objectives Specific Aims Read across and analogue approach The exercise

More information

Quality Measures Green Light Report Online Management Tool. Self Guided Tutorial

Quality Measures Green Light Report Online Management Tool. Self Guided Tutorial Quality Measures Green Light Report Online Management Tool Self Guided Tutorial 1 Tutorial Contents Overview Access the QM Green Light Report Review the QM Green Light Report Tips for Success Contact PointRight

More information

Comparing whole genomes

Comparing whole genomes BioNumerics Tutorial: Comparing whole genomes 1 Aim The Chromosome Comparison window in BioNumerics has been designed for large-scale comparison of sequences of unlimited length. In this tutorial you will

More information

SuperCELL Data Programmer and ACTiSys IR Programmer User s Guide

SuperCELL Data Programmer and ACTiSys IR Programmer User s Guide SuperCELL Data Programmer and ACTiSys IR Programmer User s Guide This page is intentionally left blank. SuperCELL Data Programmer and ACTiSys IR Programmer User s Guide The ACTiSys IR Programmer and SuperCELL

More information

Description of the ED library Basic Atoms

Description of the ED library Basic Atoms Description of the ED library Basic Atoms Simulation Software / Description of the ED library BASIC ATOMS Enterprise Dynamics Copyright 2010 Incontrol Simulation Software B.V. All rights reserved Papendorpseweg

More information

Store User Guide - Forecasting. Jimmy John s

Store User Guide - Forecasting. Jimmy John s Store User Guide - Forecasting Jimmy John s All rights reserved. This publication contains proprietary information of HotSchedules. No part of this publication may be reproduced, stored in a retrieval

More information

Ligand Scout Tutorials

Ligand Scout Tutorials Ligand Scout Tutorials Step : Creating a pharmacophore from a protein-ligand complex. Type ke6 in the upper right area of the screen and press the button Download *+. The protein will be downloaded and

More information

User Manuel. EurotaxForecast. Version Latest changes ( )

User Manuel. EurotaxForecast. Version Latest changes ( ) User Manuel EurotaxForecast Version 1.23.0771- Latest changes (19.07.2003) Contents Preface 5 Welcome to Eurotax Forecast...5 Using this manual 6 How to use this manual?...6 Program overview 7 General

More information

Forecasting (LO-PR) HELP.LOPR. Release 4.6C

Forecasting (LO-PR) HELP.LOPR. Release 4.6C HELP.LOPR Release 4.6C SAP AG Copyright Copyright 2001 SAP AG. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission

More information

SeeSAR 7.1 Beginners Guide. June 2017

SeeSAR 7.1 Beginners Guide. June 2017 SeeSAR 7.1 Beginners Guide June 2017 Part 1: Basics 1 Type a pdb code and press return or Load your own protein or already existing project, or Just load molecules To begin, let s type 2zff and download

More information

SteelSmart System Cold Formed Steel Design Software Download & Installation Instructions

SteelSmart System Cold Formed Steel Design Software Download & Installation Instructions Step 1 - Login or Create an Account at the ASI Portal: Login: https://portal.appliedscienceint.com/account/login Create Account: https://portal.appliedscienceint.com/account/register 2 0 1 7 A p p l i

More information

Appendix B Microsoft Office Specialist exam objectives maps

Appendix B Microsoft Office Specialist exam objectives maps B 1 Appendix B Microsoft Office Specialist exam objectives maps This appendix covers these additional topics: A Excel 2003 Specialist exam objectives with references to corresponding material in Course

More information

University of Colorado Denver Anschutz Medical Campus Online Chemical Inventory System User s Manual

University of Colorado Denver Anschutz Medical Campus Online Chemical Inventory System User s Manual University of Colorado Denver Anschutz Medical Campus Online Chemical Inventory System User s Manual Hazardous Materials Division 303-724-0345 chemical.inventory@ucdenver.edu May, 2017 Table of Contents

More information

CHEMICAL INVENTORY ENTRY GUIDE

CHEMICAL INVENTORY ENTRY GUIDE CHEMICAL INVENTORY ENTRY GUIDE Version Date Comments 1 October 2013 Initial A. SUMMARY All chemicals located in research and instructional laboratories at George Mason University are required to be input

More information

OECD QSAR Toolbox v.3.0

OECD QSAR Toolbox v.3.0 OECD QSAR Toolbox v.3.0 Step-by-step example of how to categorize an inventory by mechanistic behaviour of the chemicals which it consists Background Objectives Specific Aims Trend analysis The exercise

More information

Chemical Safety Software

Chemical Safety Software Chemical Safety Software www.chemicalsafety.com ENVIRONMENTAL MANAGEMENT SYSTEMS EMS DEMO USER GUIDE V. 2017 Chemical Safety Software All Rights Reserved Page 1 Contents Wel o e to Che i al Safet s EMS

More information

Experiment: Oscillations of a Mass on a Spring

Experiment: Oscillations of a Mass on a Spring Physics NYC F17 Objective: Theory: Experiment: Oscillations of a Mass on a Spring A: to verify Hooke s law for a spring and measure its elasticity constant. B: to check the relationship between the period

More information

Virtual Beach Making Nowcast Predictions

Virtual Beach Making Nowcast Predictions Virtual Beach 3.0.6 Making Nowcast Predictions In this module you will learn how to: A. Create a real-time connection to Web data services through EnDDaT B. Download real-time data to make a Nowcast prediction

More information

15. Studio ScaleChem Getting Started

15. Studio ScaleChem Getting Started 15. Studio ScaleChem Getting Started Terminology Analysis Brines Gases Oils Reconciliation Before we can discuss how to use Studio ScaleChem we must first discuss some terms. This will help us define some

More information

Science of Synthesis Guided Examples

Science of Synthesis Guided Examples Science of Synthesis Guided Examples 1 Science of Synthesis Guided Examples Compiled by: Dr. Thomas Krimmer Table of Contents 1 Exact Structure Search...2 2 Houben-Weyl...5 3 Reaction Search...6 4 Outbound

More information

Using SkyTools to log Texas 45 list objects

Using SkyTools to log Texas 45 list objects Houston Astronomical Society Using SkyTools to log Texas 45 list objects You can use SkyTools to keep track of objects observed in Columbus and copy the output into the Texas 45 observation log. Preliminary

More information

GIS Workshop UCLS_Fall Forum 2014 Sowmya Selvarajan, PhD TABLE OF CONTENTS

GIS Workshop UCLS_Fall Forum 2014 Sowmya Selvarajan, PhD TABLE OF CONTENTS TABLE OF CONTENTS TITLE PAGE NO. 1. ArcGIS Basics I 2 a. Open and Save a Map Document 2 b. Work with Map Layers 2 c. Navigate in a Map Document 4 d. Measure Distances 4 2. ArcGIS Basics II 5 a. Work with

More information

ISIS/Draw "Quick Start"

ISIS/Draw Quick Start ISIS/Draw "Quick Start" Click to print, or click Drawing Molecules * Basic Strategy 5.1 * Drawing Structures with Template tools and template pages 5.2 * Drawing bonds and chains 5.3 * Drawing atoms 5.4

More information

Computer simulation of radioactive decay

Computer simulation of radioactive decay Computer simulation of radioactive decay y now you should have worked your way through the introduction to Maple, as well as the introduction to data analysis using Excel Now we will explore radioactive

More information

How to Create a Substance Answer Set

How to Create a Substance Answer Set How to Create a Substance Answer Set Select among five search techniques to find substances Since substances can be described by multiple names or other characteristics, SciFinder gives you the flexibility

More information

Operating Instructions. Titration Excellence Terminal

Operating Instructions. Titration Excellence Terminal Operating Instructions Titration Excellence Terminal Table of Contents Contents Page 1. Introduction 1 2. Functional Description 3 2.1 Layout of the Terminal 3 2.2 Operating the Touchscreen 4 2.3 The

More information

v Prerequisite Tutorials GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Time minutes

v Prerequisite Tutorials GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Time minutes v. 10.1 WMS 10.1 Tutorial GSSHA WMS Basics Creating Feature Objects and Mapping Attributes to the 2D Grid Populate hydrologic parameters in a GSSHA model using land use and soil data Objectives This tutorial

More information

Moving into the information age: From records to Google Earth

Moving into the information age: From records to Google Earth Moving into the information age: From records to Google Earth David R. R. Smith Psychology, School of Life Sciences, University of Hull e-mail: davidsmith.butterflies@gmail.com Introduction Many of us

More information

Quality Measures (QM) Report. Self Guided Tutorial

Quality Measures (QM) Report. Self Guided Tutorial Quality Measures (QM) Report Self Guided Tutorial 1 Tutorial Contents Overview of the QM Online Report Facility Summary Report Resident Drill down Monthly Trend Report Resident Roster Report Printing Reports/Export

More information

FireFamilyPlus Version 5.0

FireFamilyPlus Version 5.0 FireFamilyPlus Version 5.0 Working with the new 2016 NFDRS model Objectives During this presentation, we will discuss Changes to FireFamilyPlus Data requirements for NFDRS2016 Quality control for data

More information

OECD QSAR Toolbox v.4.1. Tutorial illustrating new options for grouping with metabolism

OECD QSAR Toolbox v.4.1. Tutorial illustrating new options for grouping with metabolism OECD QSAR Toolbox v.4.1 Tutorial illustrating new options for grouping with metabolism Outlook Background Objectives Specific Aims The exercise Workflow 2 Background Grouping with metabolism is a procedure

More information

OECD QSAR Toolbox v.3.3. Step-by-step example of how to categorize an inventory by mechanistic behaviour of the chemicals which it consists

OECD QSAR Toolbox v.3.3. Step-by-step example of how to categorize an inventory by mechanistic behaviour of the chemicals which it consists OECD QSAR Toolbox v.3.3 Step-by-step example of how to categorize an inventory by mechanistic behaviour of the chemicals which it consists Background Objectives Specific Aims Trend analysis The exercise

More information

Table of content. Understanding workflow automation - Making the right choice Creating a workflow...05

Table of content. Understanding workflow automation - Making the right choice Creating a workflow...05 Marketers need to categorize their audience to maximize their r e a c h. Z o h o C a m p a i g n s a u t o m a t e s r e c i p i e n t c l a s s i fi c a t i o n a n d action performance to free up marketers

More information

PAID INVOICE TAX REPORT

PAID INVOICE TAX REPORT PAID INVOICE TAX REPORT The documentation in this publication is provided pursuant to a Sales and Licensing Contract for the Prophet 21 System entered into by and between Prophet 21 and the Purchaser to

More information

Notifications and Accretions: Facility Role

Notifications and Accretions: Facility Role Notifications and Accretions: Facility Role Goal: Learn to view and resolve notification and accretion discrepancies in CROWNWeb. Estimated Time: 25 to 30 minutes PDF: Download a screen reader compatible

More information

Spatial Data Analysis in Archaeology Anthropology 589b. Kriging Artifact Density Surfaces in ArcGIS

Spatial Data Analysis in Archaeology Anthropology 589b. Kriging Artifact Density Surfaces in ArcGIS Spatial Data Analysis in Archaeology Anthropology 589b Fraser D. Neiman University of Virginia 2.19.07 Spring 2007 Kriging Artifact Density Surfaces in ArcGIS 1. The ingredients. -A data file -- in.dbf

More information

Building Inflation Tables and CER Libraries

Building Inflation Tables and CER Libraries Building Inflation Tables and CER Libraries January 2007 Presented by James K. Johnson Tecolote Research, Inc. Copyright Tecolote Research, Inc. September 2006 Abstract Building Inflation Tables and CER

More information

Creating Empirical Calibrations

Creating Empirical Calibrations 030.0023.01.0 Spreadsheet Manual Save Date: December 1, 2010 Table of Contents 1. Overview... 3 2. Enable S1 Calibration Macro... 4 3. Getting Ready... 4 4. Measuring the New Sample... 5 5. Adding New

More information

Calculating Bond Enthalpies of the Hydrides

Calculating Bond Enthalpies of the Hydrides Proposed Exercise for the General Chemistry Section of the Teaching with Cache Workbook: Calculating Bond Enthalpies of the Hydrides Contributed by James Foresman, Rachel Fogle, and Jeremy Beck, York College

More information

User Guide. Affirmatively Furthering Fair Housing Data and Mapping Tool. U.S. Department of Housing and Urban Development

User Guide. Affirmatively Furthering Fair Housing Data and Mapping Tool. U.S. Department of Housing and Urban Development User Guide Affirmatively Furthering Fair Housing Data and Mapping Tool U.S. Department of Housing and Urban Development December, 2015 1 Table of Contents 1. Getting Started... 5 1.1 Software Version...

More information

Technical Procedure for Glass Refractive Index Measurement System 3 (GRIM 3)

Technical Procedure for Glass Refractive Index Measurement System 3 (GRIM 3) Technical Procedure for Glass Refractive Index Measurement System 3 (GRIM 3) 1.0 Purpose - This technical procedure shall be followed for the operation of the GRIM 3. 2.0 Scope - This procedure applies

More information

Chem 1 Kinetics. Objectives. Concepts

Chem 1 Kinetics. Objectives. Concepts Chem 1 Kinetics Objectives 1. Learn some basic ideas in chemical kinetics. 2. Understand how the computer visualizations can be used to benefit the learning process. 3. Understand how the computer models

More information

M61 1 M61.1 PC COMPUTER ASSISTED DETERMINATION OF ANGULAR ACCELERATION USING TORQUE AND MOMENT OF INERTIA

M61 1 M61.1 PC COMPUTER ASSISTED DETERMINATION OF ANGULAR ACCELERATION USING TORQUE AND MOMENT OF INERTIA M61 1 M61.1 PC COMPUTER ASSISTED DETERMINATION OF ANGULAR ACCELERATION USING TORQUE AND MOMENT OF INERTIA PRELAB: Before coming to the lab, you must write the Object and Theory sections of your lab report

More information

Applying MapCalc Map Analysis Software

Applying MapCalc Map Analysis Software Applying MapCalc Map Analysis Software Generating Surface Maps from Point Data: A farmer wants to generate a set of maps from soil samples he has been collecting for several years. Previously, he would

More information

Investigation reply tool operation manual

Investigation reply tool operation manual CITIZEN ELECTRONICS CO.,LTD GreenSurveyTool Ver.2.00 Investigation reply tool operation manual May, 2011 CITIZEN ELECTRONICS CO., LTD. Contents 1.Purpose... 2 2.Survey Scope... 2 3.Survey Items... 3 4.Notes

More information

OECD QSAR Toolbox v.3.3

OECD QSAR Toolbox v.3.3 OECD QSAR Toolbox v.3.3 Step-by-step example on how to predict the skin sensitisation potential of a chemical by read-across based on an analogue approach Outlook Background Objectives Specific Aims Read

More information

Search for the Gulf of Carpentaria in the remap search bar:

Search for the Gulf of Carpentaria in the remap search bar: This tutorial is aimed at getting you started with making maps in Remap (). In this tutorial we are going to develop a simple classification of mangroves in northern Australia. Before getting started with

More information

Getting started with BatchReactor Example : Simulation of the Chlorotoluene chlorination

Getting started with BatchReactor Example : Simulation of the Chlorotoluene chlorination Getting started with BatchReactor Example : Simulation of the Chlorotoluene chlorination 2011 ProSim S.A. All rights reserved. Introduction This document presents the different steps to follow in order

More information

Jasco V-670 absorption spectrometer

Jasco V-670 absorption spectrometer Laser Spectroscopy Labs Jasco V-670 absorption spectrometer Operation instructions 1. Turn ON the power switch on the right side of the spectrophotometer. It takes about 5 minutes for the light source

More information

Frequently Asked Questions

Frequently Asked Questions Frequently Asked Questions Can I still get paid via direct deposit? Can I use e- wallet to pay for USANA auto ship orders? Can I use e- wallet to pay for USANA products? Can I use e- wallet to pay for

More information

Watershed Modeling Orange County Hydrology Using GIS Data

Watershed Modeling Orange County Hydrology Using GIS Data v. 10.0 WMS 10.0 Tutorial Watershed Modeling Orange County Hydrology Using GIS Data Learn how to delineate sub-basins and compute soil losses for Orange County (California) hydrologic modeling Objectives

More information

Studying Topography, Orographic Rainfall, and Ecosystems (STORE)

Studying Topography, Orographic Rainfall, and Ecosystems (STORE) Studying Topography, Orographic Rainfall, and Ecosystems (STORE) Introduction Basic Lesson 3: Using Microsoft Excel to Analyze Weather Data: Topography and Temperature This lesson uses NCDC data to compare

More information

OECD QSAR Toolbox v.3.4

OECD QSAR Toolbox v.3.4 OECD QSAR Toolbox v.3.4 Step-by-step example on how to predict the skin sensitisation potential approach of a chemical by read-across based on an analogue approach Outlook Background Objectives Specific

More information

An area chart emphasizes the trend of each value over time. An area chart also shows the relationship of parts to a whole.

An area chart emphasizes the trend of each value over time. An area chart also shows the relationship of parts to a whole. Excel 2003 Creating a Chart Introduction Page 1 By the end of this lesson, learners should be able to: Identify the parts of a chart Identify different types of charts Create an Embedded Chart Create a

More information

Location Intelligence Infrastructure Asset Management. Confirm. Confirm Mapping Link to ArcMap Version v18.00b.am

Location Intelligence Infrastructure Asset Management. Confirm. Confirm Mapping Link to ArcMap Version v18.00b.am Location Intelligence Infrastructure Asset Management Confirm Confirm Mapping Link to ArcMap Version v18.00b.am Information in this document is subject to change without notice and does not represent a

More information

1 M62 M62.1 CONSERVATION OF ANGULAR MOMENTUM FOR AN INELASTIC COLLISION

1 M62 M62.1 CONSERVATION OF ANGULAR MOMENTUM FOR AN INELASTIC COLLISION 1 M62 M62.1 CONSERVATION OF ANGULAR MOMENTUM FOR AN INELASTIC COLLISION PRELAB: Before coming to the lab, you must write the Object and Theory sections of your lab report and include the Data Tables. You

More information

T R A I N I N G M A N U A L 1. 9 G H Z C D M A P C S 80 0 M H Z C D M A /A M P S ( T R I - M O D E ) PM325

T R A I N I N G M A N U A L 1. 9 G H Z C D M A P C S 80 0 M H Z C D M A /A M P S ( T R I - M O D E ) PM325 T R A I N I N G M A N U A L 1. 9 G H Z C D M A P C S 80 0 M H Z C D M A /A M P S ( T R I - M O D E ) PM325 Slide. Click. Send the pic O P E R AT I N G I N S T RU C T I O N S H e a d s e t Ja c k S e l

More information

New SPOT Program. Customer Tutorial. Tim Barry Fire Weather Program Leader National Weather Service Tallahassee

New SPOT Program. Customer Tutorial. Tim Barry Fire Weather Program Leader National Weather Service Tallahassee New SPOT Program Customer Tutorial Tim Barry Fire Weather Program Leader National Weather Service Tallahassee tim.barry@noaa.gov Live Demonstration http://www.weather.gov/spot/ Live Demonstration http://www.weather.gov/spot/

More information

Double Star Observations

Double Star Observations Double Star Observations Canopus now includes enhanced features for measurnig double stars. This includes easier setting of the reference position (the primary star) as well as recording the observations

More information

41. Sim Reactions Example

41. Sim Reactions Example HSC Chemistry 7.0 41-1(6) 41. Sim Reactions Example Figure 1: Sim Reactions Example, Run mode view after calculations. General This example contains instruction how to create a simple model. The example

More information

D.T.M: TRANSFER TEXTBOOKS FROM ONE SCHOOL TO ANOTHER

D.T.M: TRANSFER TEXTBOOKS FROM ONE SCHOOL TO ANOTHER Destiny Textbook Manager allows users with full access to transfer Textbooks from one school site to another and receive transfers from the warehouse In this tutorial you will learn how to: Requirements:

More information

Copy the rules into MathLook for a better view. Close MathLook after observing the equations.

Copy the rules into MathLook for a better view. Close MathLook after observing the equations. Sample : Torsion on a Sha The Sha Design example is found the Sample Applications, Engeerg and Science section of the TK Solver Library. When it loads, the Variable and Rule Sheets appear as shown below.

More information

ST-Links. SpatialKit. Version 3.0.x. For ArcMap. ArcMap Extension for Directly Connecting to Spatial Databases. ST-Links Corporation.

ST-Links. SpatialKit. Version 3.0.x. For ArcMap. ArcMap Extension for Directly Connecting to Spatial Databases. ST-Links Corporation. ST-Links SpatialKit For ArcMap Version 3.0.x ArcMap Extension for Directly Connecting to Spatial Databases ST-Links Corporation www.st-links.com 2012 Contents Introduction... 3 Installation... 3 Database

More information

OECD QSAR Toolbox v.4.1. Step-by-step example for building QSAR model

OECD QSAR Toolbox v.4.1. Step-by-step example for building QSAR model OECD QSAR Toolbox v.4.1 Step-by-step example for building QSAR model Background Objectives The exercise Workflow of the exercise Outlook 2 Background This is a step-by-step presentation designed to take

More information

Connect the Vernier spectrometer to your lap top computer and power the spectrometer if necessary. Start LoggerPro on your computer.

Connect the Vernier spectrometer to your lap top computer and power the spectrometer if necessary. Start LoggerPro on your computer. Connect the Vernier spectrometer to your lap top computer and power the spectrometer if necessary. Start LoggerPro on your computer. The screen shown in Fig. 1 may be displayed. If status line displays

More information

Forecasting Workbench in PRMS TM. Master Production Schedule. Material Requirements Plan. Work Order/ FPO Maintenance. Soft Bill Maintenance

Forecasting Workbench in PRMS TM. Master Production Schedule. Material Requirements Plan. Work Order/ FPO Maintenance. Soft Bill Maintenance Forecasting Workbench in PRMS TM SHOP FLOOR CONTROL Work Order/ FPO Maintenance Auto Allocation to Lots Pick Slip Print Master Production Schedule Material Requirements Plan Soft Bill Maintenance Stage

More information

The Geodatabase Working with Spatial Analyst. Calculating Elevation and Slope Values for Forested Roads, Streams, and Stands.

The Geodatabase Working with Spatial Analyst. Calculating Elevation and Slope Values for Forested Roads, Streams, and Stands. GIS LAB 7 The Geodatabase Working with Spatial Analyst. Calculating Elevation and Slope Values for Forested Roads, Streams, and Stands. This lab will ask you to work with the Spatial Analyst extension.

More information

Analyst Software. Peptide and Protein Quantitation Tutorial

Analyst Software. Peptide and Protein Quantitation Tutorial This document is provided to customers who have purchased AB Sciex equipment to use in the operation of such AB Sciex equipment. This document is copyright protected and any reproduction of this document

More information

Data Structures & Database Queries in GIS

Data Structures & Database Queries in GIS Data Structures & Database Queries in GIS Objective In this lab we will show you how to use ArcGIS for analysis of digital elevation models (DEM s), in relationship to Rocky Mountain bighorn sheep (Ovis

More information

Introduction to ArcMap

Introduction to ArcMap Introduction to ArcMap ArcMap ArcMap is a Map-centric GUI tool used to perform map-based tasks Mapping Create maps by working geographically and interactively Display and present Export or print Publish

More information

NMR Predictor. Introduction

NMR Predictor. Introduction NMR Predictor This manual gives a walk-through on how to use the NMR Predictor: Introduction NMR Predictor QuickHelp NMR Predictor Overview Chemical features GUI features Usage Menu system File menu Edit

More information

BASIC TECHNOLOGY Pre K starts and shuts down computer, monitor, and printer E E D D P P P P P P P P P P

BASIC TECHNOLOGY Pre K starts and shuts down computer, monitor, and printer E E D D P P P P P P P P P P BASIC TECHNOLOGY Pre K 1 2 3 4 5 6 7 8 9 10 11 12 starts and shuts down computer, monitor, and printer P P P P P P practices responsible use and care of technology devices P P P P P P opens and quits an

More information

AFFH-T User Guide September 2017 AFFH-T User Guide U.S. Department of Housing and Urban Development

AFFH-T User Guide September 2017 AFFH-T User Guide U.S. Department of Housing and Urban Development AFFH-T User Guide Affirmatively Furthering Fair Housing Data and Mapping Tool v. 4.1 U.S. Department of Housing and Urban Development September 2017 Version 4.1 ❿ September 2017 Page 1 Document History

More information

From BASIS DD to Barista Application in Five Easy Steps

From BASIS DD to Barista Application in Five Easy Steps Y The steps are: From BASIS DD to Barista Application in Five Easy Steps By Jim Douglas our current BASIS Data Dictionary is perfect raw material for your first Barista-brewed application. Barista facilitates

More information

EHSA Chemical Inventory Guidance. As of 8/15/2018

EHSA Chemical Inventory Guidance. As of 8/15/2018 EHSA Chemical Inventory Guidance As of 8/15/2018 Access PI s Chemical Inventory To access your PI s chemical Inventory, first log into EHSA with your Kerberos ID. Under Inventory and Chemical Inventory,

More information

PROJECT LEADER TIP #6 HOW TO ADD SAMPLING UNITS

PROJECT LEADER TIP #6 HOW TO ADD SAMPLING UNITS PROJECT LEADER TIP #6 HOW TO ADD SAMPLING UNITS Before beginning, it is important to understand that sampling locations are set-up hierarchically. For example, Pacific Flyway Shorebird Survey the hierarchy

More information

UltraWeatherBug3 HSPI User s Guide A HomeSeer HS3 plug-in to access live local weather conditions, forecasts and severe weather alerts

UltraWeatherBug3 HSPI User s Guide A HomeSeer HS3 plug-in to access live local weather conditions, forecasts and severe weather alerts UltraWeatherBug3 HSPI User s Guide A HomeSeer HS3 plug-in to access live local weather conditions, forecasts and severe weather alerts Copyright 2015 ultrajones@hotmail.com Revised 08/08/2015 This document

More information

RADIATION PROCEDURES MANUAL Procedure Cover Sheet

RADIATION PROCEDURES MANUAL Procedure Cover Sheet RADIATION PROCEDURES MANUAL Procedure Cover Sheet Procedure Title: Radioactive Material Inventory Procedure Number: TSO-09-16-REV 0 Effective Date: June 18, 2009 Approved By: Date: 11 August, 2009 Technical

More information

Sales Analysis User Manual

Sales Analysis User Manual Sales Analysis User Manual Confidential Information This document contains proprietary and valuable, confidential trade secret information of APPX Software, Inc., Richmond, Virginia Notice of Authorship

More information

NINE CHOICE SERIAL REACTION TIME TASK

NINE CHOICE SERIAL REACTION TIME TASK instrumentation and software for research NINE CHOICE SERIAL REACTION TIME TASK MED-STATE NOTATION PROCEDURE SOF-700RA-8 USER S MANUAL DOC-025 Rev. 1.3 Copyright 2013 All Rights Reserved MED Associates

More information

10. Facies Modeling Sequential Indicator Simulation (SIS)

10. Facies Modeling Sequential Indicator Simulation (SIS) 10. Facies Modeling 10.1 Sequential Indicator Simulation (SIS) In this section the process of building a basic facies model conditioned to well observations using SIS. The variogram type, ranges, and azimuth

More information

Performing Map Cartography. using Esri Production Mapping

Performing Map Cartography. using Esri Production Mapping AGENDA Performing Map Cartography Presentation Title using Esri Production Mapping Name of Speaker Company Name Kannan Jayaraman Agenda Introduction What s New in ArcGIS 10.1 ESRI Production Mapping Mapping

More information