Fundamentals of Surveying (LE/ESSE )
|
|
- Gloria Price
- 6 years ago
- Views:
Transcription
1 Fundamentals of Surveying (LE/ESSE ) Lecture 2 Basics of Surveying Dr.-Ing. Jian-Guo Wang Geomatics Engineering York University Fall
2 2-1. Overview Part 1: Basics - The Earth s Shape & Size. - Coordinate Systems and Geodetic Positioning - Map Projections - The Transverse Mercator Projections and UTM - Elevations - Limitation of the use of plane instead of level surface -Maps - Field and Office Works Part 2: Theory of Errors in Observations (lecture 3) 2
3 2-2. The Earth s Shape and Size The Geoid & the Reference Ellipsoids 1. The Problem The main objective of surveying: studying the natural surface of the Earth The Characteristics of the Earth: a) Irregular surface (high mountains, hills, plains, rivers, lakes, oceans). The highest point: 8,848 m (Mount Everest or Zhumulangma Peak) The deepest point: -11,000m (Mariana Trench) 71% of the Earth s surface is covered by oceans. b) The distribution density of Earth s mass is not uniform. The Earth s gravity is as the combined effect of its gravitation and centrifugal force (next slide). c) The earth is not a SPHERE, but flattened slightly at the poles and bulging somehow at the Equator. d) Our knowledge about the Earth is getting better and better, but still limited. e) In engineering practice one has to make a lot of assumptions to approximate the real characteristics of the Earth! Need for Geodetic Datum(s) (The Model of the Earth) to define the size and shape of the earth and the origin and orientation of the coordinate systems used to map the earth (the reference for the mathematical reduction of geodetic and cartographic data, and field measurements.) 3
4 2-2. The Earth s Shape and Size 1. The Problem a). Irregular surface (high mountains, hills, plains, rivers, lakes, oceans). The highest point: 8,848 m (Mount Everest or Zhumulangma Peak) Optional for reading! 4
5 2-2. The Earth s Shape and Size 1. The Problem a. Irregular surface (high mountains, hills, plains, rivers, lakes, oceans). The deepest point: -11,000m (Mariana Trench in the western Pacific Ocean) Optional for reading! 5
6 2-2. The Earth s Shape and Size Centrifugal force Gravitation: a phenomenon through which all objects attract each other The Earth s gravitation: the Earth is surrounded by its own gravitational field, which exerts an attractive force on any object. The Earth s Centrifugal Force: due to the Earth's rotation is inseparably superimposed on the attraction The Earth s Gravity: (1). The combined effect of its gravitation and centrifugal force. (2). Direction: vertical plummet line (not towards the center of the Earth s mass). (3). Perpendicular to the gravity potential surface. 6
7 2-2. The Earth s Shape and Size 2. The Geoid (Reference Surface for Heights) a. The Canadian VERTICAL DATUM is CGVD28. CGVD2013 the Mean Sea Level (MSL) - The average level of the ocean surface halfway between the highest and lowest levels recorded, as a plane upon which we can reference or describe the heights of features on, above or below the ground. b. The sea level surface is connected with the Geoid, which is a horizontal surface shaped by the gravity field of the earth (theoretical only) - The natural extension of the MSL surface under the landmass. - The surface of the water in the trench would represent the geoid if we allowed the trench to fill with sea water. Geoid: a representation of the surface of the earth that it would assume if the sea covered the earth, also known as surface of equal equipotential surface which (approximately) coincides with the mean ocean surface (mean sea level). - sea level isn't level (and also not a mathematical surface)! - The vertical coordinate, Z (elevation), is referenced to the Geoid. - On the Geoid, the vertical axis of a properly-leveled instrument is coincided with the vertical plummet line, which is perpendicular to the Geoid. 7
8 2-2. The Earth s Shape and Size 3. The Reference Ellipsoid The earth is not a SPHERE, but flattened slightly at the poles and bulging somehow at the Equator The best approximation of the figure of the Earth is the ellipsoid (an oblate ellipsoid). An ellipsoid is mathematically defined as X 2 Y 2 a 2 Z b Positioned and oriented with the best fitting - to the entire Earth the Global Reference Ellipsoid; -toaregionoftheearth-the(local) Reference Ellipsoid. A reference ellipsoid is a mathematically-defined (ellipsoid) surface that approximates the geoid, the truer figure of the Earth. 8
9 2-2. The Earth s Shape and Size 4. The Geodetic Datum In summary, a reference ellipsoid is used to describe the Earth and a Geoid model is used to express the vertical height, the MSL height. Ellipsoid Surface of the earth P H P e O L B Geoid Ellipsoid Coordinate: Latitude B Longitude L Altitude H (Ellipsoid Height) 9
10 2-2. The Earth s Shape and Size 4. The Geodetic Datum (cont d) Some Facts in surveying: a. Measurements are made on the actual topographic surface (Earth s natural surface). b. Geodetic computations are preferably performed on the reference ellipsoid. c. The (MSL) heights are based on the Geoid. d. The properly-leveled instrument at a point on the ground has its vertical axis being coincided with the local plummet line, which will be perpendicular to the Geoid if it is located on Geoid because the equipotential surfaces at different height levels are not parallel. 10
11 2-2. The Earth s Shape and Size 4. The Geodetic Datum (cont d) e. The geodetic coordinates of a point on, above or under the Earth s surface is defined as Ellipsoid Coordinate: - Latitude - Longitude H - Altitude (Ellipsoid Height) f. The (MSL) height: P Z P H P e H O H orth N the geoidal height O Y H orth = H N X The Earth, Geoid and Ellipsoid 11
12 2-2. The Earth s Shape and Size 4. The Geodetic Datum (cont d) g. The Earth-Centered, Earth-Fixed 3D Cartesian coordinates X, Y, Z X ( R Y ( Re Z ( R H )cos cos H )cos sin 2 (1 e ) H )sin e e - the (geodetic) latitude - the (geodetic) longitude a - the semi - major axis of the reference ellipsoid b - the semi - minor axis of the reference ellipsoid e R e a 2 b 2 a 2 1 e - the first eccentricity a 2 sin 2 - the radius of curvature in the prime vertical H - the ellipsoidal height of the point 12
13 2-2. The Earth s Shape and Size 4. The Geodetic Datum (cont d) h. Some Reference Ellipsoids (Examples) Optional for reading! 13
14 2-2. The Earth s Shape and Size 4. The Geodetic Datum (cont d) i. Geodetic Datum used in Canada (Natural Resources Canada) (website: Three different horizontal reference systems were used over the years: 1). Earlier blocks ( ) were based on the North American Datum of 1927 (NAD27); 2). Blocks completed between 1980 and 1989 were based on the MAY76 adjustment of NAD27; 3). Everything completed since is on the North American Datum of 1983 (NAD83). 4). The vertical datum used is the Canadian Geodetic Vertical Datum of 2013 (Geoid based). CGVD28: based on the mean sea level determined from several tidal gauges located in strategic areas of the country (4 tide gauges at the East coast & 2 at the West coast have been assigned the height 0) The official Canadian height system: CGVD2013 (vertical datum) - Normal (orthometric) heights (MSL Height) - CGVD28 became obsolete. The Earth s model: NAD83 (horizontal datum) 14
15 2-3. The Plane Coordinate System 1. Why to need a plane coordinate system? The engineering design or plan is commonly performed on the plane so that the position of a point of interest and the map representation need to be provided in a plane coordinate system. 2. The 2D plane Cartesian coordinates in surveying y y 4 th quadrant 1 st quadrant 2 nd quadrant 1 st quadrant P(x, y) P(x, y) x x o o 3 rd quadrant 2 nd quadrant 3 rd quadrant 4 th quadrant The Geodetic 2D Cartesian coordinate system trigonometric functions unchanged applicable By swapping x and y (North America) The Mathematical 2D Cartesian coordinate system 15
16 2-3. The Plane Coordinate System 2. The 2D plane Cartesian coordinate in surveying (cont d) N x 4 th quadrant 1 st quadrant 4 th quadrant 1 st quadrant P(N, E) P(x, y) E y o o 3 rd quadrant 2 nd quadrant 3 rd quadrant 2 nd quadrant The Geodetic 2D Cartesian coordinate system trigonometric functions unchanged applicable By using N x & E y (North America) The Geodetic 2D Cartesian coordinate system All trigonometric functions unchanged applicable (Germany, China etc.) The AZIMUTH from one point to the other in a 2D plane Cartesian Coordinate system is defined as the angle from the vertical axis onwards clockwise. 16
17 2-4. The Limitation of the Use of Plane instead of Level Surface 1. The problem A point on the Earth is determined by three coordinates, e.g. the latitude, longitude and altitude (or MSL height); A point on a map is located by only two coordinates, e.g. the north and east coordinates; The engineering design and plan need the plane coordinates of points; Any point on the Earth defines its own local level surface that differs from the one at a different point in general ( why an ellipsoid is employed to describe the Earth). How large is an area on the Earth can be described as a plane without significant distortion due to the curvature of the Earth? 17
18 2-4. The Limitation of the Use of Plane instead of Level Surface 2. The effect on horizontal distances by the curvature of the level surface at a point S s S S S S S t R (the arc s, 1 3 S R 2 2 t 1 3 R( 3 Rtg 2 ( AB ) 5 ( S...) Directly analyse the distance on the ellipsoid because the geodetic computation is on the ellipsoid 1 3 S R 3 2 8mm) with Level surface Geoid or Ellipsoid S 10km This distortion is smaller than the maximal tolerable error in precise distance measurement A R O t s C B h 18
19 2-4. The Limitation of the Use of Plane instead of Level Surface 3. The effect on horizontal angles by the curvature of the level surface at a point The spherical excess of a spherical polygon, the difference between the sum of their internal angles on the sphere and the sum of the projected angles on the plane, is P 2 R R - the Earth' s radius P - the area of A B C the spherical polygon 0.51 with P 100km 2 This distortion is considered only in high precise surveying for the area of 100[km 2 ] 19
20 2-4. The Limitation of the Use of Plane instead of Level Surface 4. The effect on the height difference by the curvature of the level surface at a point ( R h) h 2 R 2 t 2R h 2 t 2 2 s 2R h 8cm with s 1km Geoid or Ellipsoid A Level surface R t s R C B h O This distortion is significant even over the short distance 20
21 j The Map Projections 1. Concept of map projections The reference ellipsoid can be used as the reference surface of the surveying computations, but already very complicated and tedious. For maps of small areas, the curvature of the Earth need not be considered, but not for maps of larger areas be impossible to develop those surface areas exactly onto a plane (to flatten a section of orange peel without tearing it?); will always be some distortion, no matter whatever procedure is used to represent a large area on a map. What can be done: minimize the distortion by specifying a selected set of criteria for transforming the positions on the Earth in term of latitude (B) and longitude (L) into the scaled linear dimensions on the plane map: x y f f x y (, ) (, ) 21
22 Slide 21 j1 The mathematical derivation of the map projections are beyond the scope of this course. jgwang,
23 j The Map Projections 1. Concept of map projections - Possible Criteria: a. Conformal or orthomorphic projection correct angle/correct shape b. Equal-area projection areas in proper relative size c. Equal distant projection correct distances from one central point to other points d. Azimuthal projection correct direction/azimuth of any point vs. one central point The mathematical derivation of map projections is beyond the scope of this course and will partially be covered by ESSE3610 Geodeitc Concepts. 22
24 Slide 22 j1 The mathematical derivation of the map projections are beyond the scope of this course. jgwang,
25 2-5. The Map Projections 2. Types of map projections Orientations Azimuthal Developable surfaces Cylindrical Conic 23
26 2-5. The Map Projections 3. The requirement of map projection for topographic maps One "traditional" rule (Maling, 1992) says: a. A country in the tropics asks for a cylindrical projection. b. A country in the temperate zone asks for a conical projection. c. A polar area asks for an azimuthal projection. Optional for reading! 24
27 2-5. The Map Projections 4. Examples: Example 1: Mercator Projection 1). Conformal. 2). Used for navigation and regions near the equator. 3). History - Invented in 1569 by Gerardus Mercator (Flanders) graphically. - Standard for maritime mapping in the 17th and 18th centuries. - Used for mapping the world/oceans/equatorial regions in 19th century. - Used for mapping the world/u.s. Coastal and Geodetic Survey in 20th century. 25
28 2-5. The Map Projections 4. Examples (cont d): Example 2: Transverse Mercator Projection 1). Mercator rotated 90 degrees 2). Conformal 3). History - Invented by Lambert in Modified for ellipse by Gauss in 1822, Krüger in Used for regions with a N/S expanse - Used for topo mapping (large scale topographic map series worldwide) - Basis for State Plane Coordinate System, e.g., UTM 26
29 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids a. UTM is also called the UTM coordinate system, a grid-based method of specifying locations on the Earth s surface (a global system of the grid-based maps), used to identify locations on the earth, but differs from the traditional method of latitude and longitude in several respects. 27
30 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids b. The Global UTM Zones 28
31 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids (cont d) c. UTM divides the globe into sixty zones (6 degree zones), each spanning six degrees of longitude. Each zone is mapped by the Transverse Mercator projection; Each zone has its own central meridian (in the center of the zone) from which it spans 3 degrees west and 3 degrees east. UTM zone numbers designate 6 degree longitudinal strips extending from 80 degrees South latitude to 84 degrees North latitude. Zones are numbered from 1 to 60. Zone 1 is bounded by longitude 180 to 174 W and is centered on the 177 th West meridian, for example. UTM zone characters designate 8 degree zones extending north and south from the equator segments each longitude zone into 20 latitude zones starting from the letter C to X omitting the letters "I" and "O". Eastings are measured from the central meridian (with a 500km false easting to insure positive coordinates). Northings are measured from the equator (with a 10,000km false northing for positions south of the equator). 29
32 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids d. A single UTM Zone - 6 degrees of longitude wide ~ 672 km on the Equator, becoming narrower towards north and south. - Central meridian at false easting m. - Secant longitude 180 km from the central meridian on the Equator. - Scale factor = 1 along secant meridians and along the central meridian. - Scale = 1 along secant meridians and constant along the central meridian. - Some FMU s fall between UTM zones problems with file projections and map orientations! - UTM zones can be projected into other (neighbouring) zones. Secant meridians UTM Zone 30
33 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids e. UTM Zones in Canada Canada is covered with 16 zones, 7-22 Ontario is covered with 4 zones,
34 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids e. Map sheets in BC, Canada Optional for reading! 32
35 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids f. Ontario Digital Topographic Database Optional for reading! 33
36 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids f. Ontario Digital Topographic Database Distribution of Maps in Ontario Optional for reading! 34
37 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids g. Projection in Canada (Natural Resources Canada) (website: All the ASDB (Aerial Survey Database) coordinates have been computed using the Universal Transverse Mercator (UTM) projection. The Canadian landmass extends from UTM Zone 7 in the west to UTM Zone 22 in the east. Each zone is six degrees of Longitude in width. When a database block spans more than one zone, the predominant zone is used for the entire block. Should the client require the data in the adjacent zone, personnel from the Aerotriangulation Unit will transform the entire block to the desired zone. COMMENT: MTM Modified Transverse Mercator (3 o Zones) 1) 10TM Alberta 10 degree Transverse Mercator is used to cover the whole Alberta within a single zone. 2) 1.5, 3 degree zone, even some specific zoning maps can also be used in practice 3) Arbitrary zoning maps can be required by urban planning, civil engineering projects The central axis of the working area can be chosen to be the central meridian line of the zone and the average height plane as the projection plane (not on ellipsoid) in order to minimize the projection distortion. 35
38 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids h. MTM Modified Transverse Mercator (3 o Zones) 1) is another map projection, similar to the UTM 2) is based on completely on the original transverse Mercator with a secant cylinder 3) has a region divided into zones of 3 of longitude each (i.e., 1.5 on each side of the zone s central meridian). Each zone is projected separately, which leads to a small distortion 4) utilize a scale factor of along the zone s central meridian to at the zone boundary 5) introduce the false northing and false easting of 0.0m and 304,800m in Canada to avoid negative coordinates 36
39 2-5. The Map Projections 5. Universal Transverse Mercator (UTM) Grids h. MTM Modified Transverse Mercator (3 o Zones) 37
40 2-6. The Azimuth Angles 1. Three Basic Directions The true north direction: The direction from a point of interest along the tangent line of the true meridian north (determined by observing the sun, stars or gyroscopic theodolite). The grid north direction: the positive direction of the vertical axis in the grid (the north direction in a UTM grid) The magnetic north direction: the magnetic north direction (not a fixed direction), not coincided with the true north because the magnetic north pole is not exactly the earth s north pole. Comment: The North Magnetic Pole is slowly drifting across the Canadian Arctic. The Geological Survey of Canada keeps track of this motion by periodically carrying out magnetic surveys to redetermine the Pole's location. The most recent survey, completed in May, 2001, determined an updated position for the Pole and established that it is moving approximately northwest at 40 km per year. The observed position for 2001 and estimated positions for 2002 to 2005 are given in the table. [Geological survey of Canada, 2005] 38
41 2-6. The Azimuth Angles 2. The Meridian convergence P ( 0)sin sin P P - the latitude of P P - the longitude of P - the central longitude of 0 3. The Magnetic Declination not a constant angle. 4. The Azimuths A Am A A m P A- the true azimuth A - the magnetic azimuth m - the grid azimuth - the convergence of the meridian - the magnetic inclination P the zone 39
42 2-6. The Azimuth Angles 5. The Grid Azimuth and Its Reverse Grid Azimuth 1,2 2,
43 2-7. Units, Significant Figures and Field Notes 1. The Types of Measurements - Horizontal angles; - Horizontal distances; - Vertical (Zenith) angles; - Vertical Distances; - Slope Distances Need Units for length, area, volume and angle - Metric system (international system of Units); - English system 2. Measurement Canada and the Metric System in Canada Measurement Canada is the agency responsible for enforcing federal laws that protect both the Canadian public and Canadian industry when goods and services are traded on the basis of measurement. The use of the metric system within its mandate because metric is not only a recognized system for measurement, it is a legal system for measurement in Canada 41
44 2-7. Units, Significant Figures and Field Notes 3. Significant Figures Definition: The number of significant figures in any observed value includes the positive digits plus one digit that is estimated or rounded off, and therefore questionable. For Example: A distance measured with a tape whose smallest graduations are mm, and recorded as m It has 5 significant figures; The first 4 digits are certain; The last one is rounded off and therefore questionable but still significant. Don t confuse the number of significant figures with the number of decimal places! How to handle the figures in a mathematical process?
45 2-7. Units, Significant Figures and Field Notes 3. Significant Figures (cont d) Understanding of significant figures in surveying practice a. Field measurements are given to some specific number of significant figures, thus dictating the number of significant figures in answers derived from them commonly carry at least one more digit than required, and then round off the final answer to the correct number of significant figures. b. There may be an implied number of significant figures. For example, a distance is specified as 100m. In laying out this length, such a distance would probably be measured to the nearest cm or mm upon the accuracy requirement. A good practice is to provide the distance as m or m, even multiple ZEROS at the end of the number after the decimal point. c. Each factor may not cause an equal variation. Example 1: a steel tape m long to be corrected for a change in temperature of 25 o C m has five significant figures while 25 o C has only two. In the view of design, one has to analyse how good the temperature should be Example 2: the computation of a horizontal distance from a slope distance and a measured vertical angle d s tg s d 43
46 2-7. Units, Significant Figures and Field Notes 3. Significant Figures (cont d) d. Measurements are recorded in one unit or in one system of units, but may have to be converted to another. Example 1: convert an angle 123 o into degrees. Which of the following numbers should be given? 1) ) ) Answer: 1). 123 o o o Example 2: How many seconds or radians of latitude or longitude are corresponding to one cm long ground distance? 4. Rounding off numbers - the process of dropping one or more digits so the answer contains only those digits that are significant. Rule 1: The number is written without the digit, when the digit to be dropped is lower than 5: ; ; Rule 2: The number is written with the preceding digit increase by 1, when the digit to be dropped is greater than 5: Rule 3: The nearest even number is used for the preceding digit, when the digit to be dropped is exactly 5: ;
47 2-7. Units, Significant Figures and Field Notes 5. Field Notes - The records of work done in the field, including any hard and soft records. For example, Measurements, sketches, descriptions, other items of miscellaneous information The original field notes should be kept and remain unchanged. 45
48 2-7. Units, Significant Figures and Field Notes 5. Field Notes (cont d) 46
49 2-8. Field and Office Work The Essential Procedures in a surveying project: a. Collection of Existing Information: maps; control points. b. Planning and Design: specifications; datum; map projection and coordinate system; field observation outlines/procedures c. Equipment: selection; testing, calibration and adjustment; d. Field operation: control Surveying: horizontal, vertical mapping setting out survey final as-built survey deformation monitoring e. Field and Office Data QA and QC, data processing, results management COMMENTS: 1. Refer to Chapter 3 in the text book for more details 2. Your understanding will become better and better with the time being through your lab assignments and your work in the future 47
Georeferencing, Map Projections, Cartographic Concepts. -Coordinate Systems -Datum
Georeferencing, Map Projections, Cartographic Concepts -Map Projections -Coordinate Systems -Datum Map projection is "the process of systematically transforming positions on the Earth's spherical surface
More informationThis week s topics. Week 6. FE 257. GIS and Forest Engineering Applications. Week 6
FE 257. GIS and Forest Engineering Applications Week 6 Week 6 Last week Chapter 8 Combining and splitting landscape features and merging GIS databases Chapter 11 Overlay processes Questions? Next week
More informationMap projections. Rüdiger Gens
Rüdiger Gens Coordinate systems Geographic coordinates f a: semi-major axis b: semi-minor axis Geographic latitude b Geodetic latitude a f: flattening = (a-b)/a Expresses as a fraction 1/f = about 300
More informationCoordinate Systems. Location on earth is defined by coordinates
Coordinate Systems We think of the earth as a sphere It is actually a spheroid (ellipsoid), slightly larger in radius at the equator than at the poles Shape of the Earth Location on earth is defined by
More informationLecture 4. Coordinate Systems & Projections
Lecture 4 Coordinate Systems & Projections Outline Geodesy Geoids Ellipsoids Geographic Coordinate Systems Magnetic North vs. True North Datums Projections Applying Coordinate Systems and Projections Why
More informationWhat is a Map Projection?
What is a Map Projection? It is how we represent a three dimensional Earth on a flat piece of paper However The process of transferring information from the Earth to a map causes every projection to distort
More information1/28/16. EGM101 Skills Toolbox. Oblate spheroid. The shape of the earth Co-ordinate systems Map projections. Geoid
EGM101 Skills Toolbox Oblate spheroid The shape of the earth Co-ordinate systems Map projections The geoid is the shape that the surface of the oceans would take under the influence of Earth's gravitation
More informationOutline. Shape of the Earth. Geographic Coordinates (φ, λ, z) Ellipsoid or Spheroid Rotate an ellipse around an axis. Ellipse.
Map Projections Outline Geodesy and map projections Prof. D. Nagesh Kumar Department of Civil Engineering Indian Institute of Science Bangalore 560 012, India http://www.civil.iisc.ernet.in/~nagesh Shape
More informationGIST 3300 / Geographic Information Systems. Last Time. Today
GIST 3300 / 5300 Last Time Ellipsoids and Datums Today Map Projections Map Projections Today we will build on the concepts of Geographic Coordinate Systems, Ellipsoids and Datums and add the concepts of
More informationWHERE ARE YOU? Maps & Geospatial Concepts Fall 2015
WHERE ARE YOU? Maps & Geospatial Concepts Fall 2015 Where are you? Relative location I m at school Absolute Location 45 26 18.07 122 43 50.78 Where is Boston? Introducing Geodesy, Ellipsoids & Geoids Geodesy
More information12/26/2012. Geographic Information Systems * * * * GIS (... yrezaei
( - Geographic Information Systems ( ( 1 2 3 Information System Data base DB IS IS DB (Knowledge ( ( (System (Information System - (Georefrence Analysis Data + Knowledge ======== Information 4 5 ( < 10%
More informationWHERE ARE YOU? Maps & Geospatial Concepts Fall 2012
WHERE ARE YOU? Maps & Geospatial Concepts Fall 2012 Where are you? Relative location I m at school Absolute Location 45 26 18.07 122 43 50.78 Datums Datums A reference surface of the Earth Used as the
More informationIntroduction to Geographic Information Science. Updates/News. Last Lecture. Geography 4103 / Map Projections and Coordinate Systems
Geography 4103 / 5103 Introduction to Geographic Information Science Map Projections and Coordinate Systems Updates/News Thursday s lecture Reading discussion 1 find the readings online open questions,
More informationEnvSci360 Computer and Analytical Cartography
EnvSci360 Computer and Analytical Cartography Lecture 3 Geodesy Map Projections, Datums, and Coordinate Systems 1 Geodesy The science of measuring and representing the shape and size of the earth, and
More informationLesson 5: Map Scale and Projections
Organizing Data and Information Lesson 5: Map Scale and Projections Map Scales Projections Information can be organized as lists, numbers, tables, text, pictures, maps, or indexes. Clusters of information
More informationGeoreferencing. Place names Postal addresses Postal codes Coordinate systems (lat/long, UTM, etc.)
Georeferencing Georeferencing Used to describe the act of assigning locations to data or information Certain requirements include that they are: unique, have shared meaning, and are persistent through
More informationMap Projections. Chapter 4 MAP PROJECTION
Map Projections Chapter 4 Map Projections What is map projection? Why are map projections drawn? What are the different types of projections? Which projection is most suitably used for which area? In this
More informationShape e o f f the e Earth
1 Coordinate Systems & Projections Coordinate Systems Two map layers are not going to register spatially unless they are based on the same coordinate system. 2 Contents Shape of the earth Datum Projections
More informationMap Projections. What does the world look like? AITOFF AZIMUTHAL EQUIDISTANT BEHRMANN EQUAL AREA CYLINDRICAL
Map Projections What does the world look like? AITOFF AZIMUTHAL EQUIDISTANT BEHRMANN EQUAL AREA CYLINDRICAL 1 CYLINDRICAL EQUAL AREA BONNE CRASTER PARABOLIC 2 ECKERT I ECKERT III ECKERT V There are many
More informationMap Projections. Displaying the earth on 2 dimensional maps
Map Projections Displaying the earth on 2 dimensional maps Map projections Define the spatial relationship between locations on earth and their relative locations on a flat map Are mathematical expressions
More informationThe Elements of GIS. Organizing Data and Information. The GIS Database. MAP and ATRIBUTE INFORMATION
GIS s Roots in Cartography Getting Started With GIS Chapter 2 Dursun Z. Seker MAP and ATRIBUTE INFORMATION Data (numbers and text) store as files refer to them collectively as a database gather inform.
More informationch02.pdf chap2.pdf chap02.pdf
Introduction to Geographic Information Systems 8th Edition Karl Solutions Manual Full Download: http://testbanklive.com/download/introduction-to-geographic-information-systems-8th-edition-karl-solutions-manu
More informationGeographic coordinate systems
1 Geographic coordinate systems In this chapter you ll learn about longitude and latitude. You ll also learn about the parts that comprise a geographic coordinate system including Spheres and spheroids
More informationLecture 10-14: Map Projections and Coordinate System
URP 1281 Surveying and Cartography Lecture 10-14: Map Projections and Coordinate System December 27, 2015 Course Teacher: Md. Esraz-Ul-Zannat Assistant Professor Department of Urban and Regional Planning
More informationA PRIMER ON COORDINATE SYSTEMS Commonly Used in Michigan
A PRIMER ON COORDINATE SYSTEMS Commonly Used in Michigan David P. Lusch, Ph.D., GISP Department of Geography Remote Sensing & GIS Research and Outreach Services Group Michigan State University September,
More informationGeoreferencing. Where on earth are we? Critical for importing and combining layers for mapping
Georeferencing Where on earth are we? Critical for importing and combining layers for mapping 1. The Geoid Earth is not a perfect sphere, it is ellipsoidal.. earth is the 'Geoid'. The difference between
More informationNR402 GIS Applications in Natural Resources Lesson 4 Map Projections
NR402 GIS Applications in Natural Resources Lesson 4 Map Projections From http://www.or.blm.gov/gis/ 1 Geographic coordinates Coordinates are expressed as Latitude and Longitude in Degrees, Minutes, Seconds
More informationProjections Part I - Categories and Properties James R. Clynch February 2006
I. Introduction and References Projections Part I - Categories and Properties James R. Clynch February 2006 The world is, approximately, a sphere. Maps are flat. Making maps requires some method of putting
More informationLecture 2. Map Projections and GIS Coordinate Systems. Tomislav Sapic GIS Technologist Faculty of Natural Resources Management Lakehead University
Lecture 2 Map Projections and GIS Coordinate Systems Tomislav Sapic GIS Technologist Faculty of Natural Resources Management Lakehead University Map Projections Map projections are mathematical formulas
More informationThe Wildlife Society Meet and Greet. Come learn about what the UNBC Student Chapter of TWS is all about!
Georeferencing I GEOG 300, Lecture 4 Dr. Anthony Jjumba 1 The Wildlife Society Meet and Greet Quiz Come learn about what the UNBC Student Chapter of TWS is all about! 5:30 7:30 PM, Wednesday September
More informationLab #3 Map Projections.
Lab #3 Map Projections http://visual.merriam-webster.com/images/earth/geography/cartography/map-projections.jpg Map Projections Projection: a systematic arrangement of parallels and meridians on a plane
More informationGeo Referencing & Map projections CGI-GIRS 0910
Geo Referencing & Map projections CGI-GIRS 0910 Where are you? 31UFT8361 174,7 441,2 51 58' NB 5 40' OL 2/60 Who are they? 3/60 Do geo data describe Earth s phenomena perfectly? Georeference systems ellipsoid
More informationMap projections. Rüdiger Gens
Rüdiger Gens 2 Outline! Relevant terms! Why map projections?! Map projection categories " Projection surfaces " Features preserved from distortions! Map projection examples! Right choice Relevant terms!
More information2. GETTING STARTED WITH GIS
2. GETTING STARTED WITH GIS What are geographic information systems and what are they used for? ArcGIS: ArcMap, ArcCatalog and ArcToolbox Vector data vs. raster data vs. attribute tables Polygons, polylines,
More informationGeo Referencing & Map projections CGI-GIRS 0910
Geo Referencing & Map projections CGI-GIRS 0910 Where are you? 31UFT8361 174,7 441,2 51 58' NB 5 40' OL 2/60 Who are they? 3/60 Do geo data describe Earth s phenomena perfectly? Georeference systems ellipsoid
More information1. Geospatial technology rarely links geospatial data to nonspatial data. a. True *b. False
Chapter 2 Where in the Geospatial World Are You? 1. Geospatial technology rarely links geospatial data to nonspatial data. 2. For geospatial technology to work, every location on Earth must be: a. inhabited
More informationImportance of Understanding Coordinate Systems and Map Projections.
Importance of Understanding Coordinate Systems and Map Projections. 1 It is extremely important that you gain an understanding of coordinate systems and map projections. GIS works with spatial data, and,
More informationWelcome to Lesson 4. It is important for a GIS analyst to have a thorough understanding of map projections and coordinate systems.
Welcome to Lesson 4. It is important for a GIS analyst to have a thorough understanding of map projections and coordinate systems. A GIS without coordinates would simply be a database like Microsoft Excel
More informationDr. ABOLGHASEM AKBARI Faculty of Civil Engineering & Earth Resources, University Malaysia Pahang (UMP)
Workshop on : Dr. ABOLGHASEM AKBARI Faculty of Civil Engineering & Earth Resources, University Malaysia Pahang (UMP) 14-15 April 2016 Venue: Tehran, Iran GIS definitions GIS: A simplified view of the real
More informationGeographers Perspectives on the World
What is Geography? Geography is not just about city and country names Geography is not just about population and growth Geography is not just about rivers and mountains Geography is a broad field that
More informationProjections & GIS Data Collection: An Overview
Projections & GIS Data Collection: An Overview Projections Primary data capture Secondary data capture Data transfer Capturing attribute data Managing a data capture project Geodesy Basics for Geospatial
More informationThe 3-D Global Spatial Data Model: Geometrical Foundation of the Global Spatial Data Infrastructure
The 3-D Global Spatial Data Model: Geometrical Foundation of the Global Spatial Data Infrastructure Earl F. Burkholder, PS, PE Annotated Table of Contents July 8,2006 I. The Global Spatial Data Model (GSDM)
More informationMapping coordinate systems
Mapping coordinate systems 1. The Earth's Graticule Latitude and Longitude The graticule is the imaginary grid of lines running east-west (lines of latitude = parallels) and north-south lines of longitude
More informationApplied Cartography and Introduction to GIS GEOG 2017 EL. Lecture-1 Chapters 1 and 2
Applied Cartography and Introduction to GIS GEOG 2017 EL Lecture-1 Chapters 1 and 2 What is GIS? A Geographic Information System (GIS) is a computer system for capturing, storing, querying, analyzing and
More informationBoolean Operators and Topological OVERLAY FUNCTIONS IN GIS
Boolean Operators and Topological OVERLAY FUNCTIONS IN GIS Query asking a question of the attribute data Standard Query Language (SQL) is used to query the data There are 4 basic statements used to get
More informationUnderstanding Projections for GIS
Presented by John Schaeffer Juniper GIS Services, Inc. This PowerPoint is available at JuniperGIS.com Presentation Objectives To understand basic concepts on projections and coordinate systems for the
More informationWhat is Geodesy? Types of Geodesy terrestrial or classical geodesy space geodesy theoretical geodesy
What is Geodesy? Geodesy is the study of: The size, shape and motion of the earth The measurement of the position and motion of points on the earth's surface, and The study of the earth's gravity field
More informationIntro to GIS Fall 2010 Georeferencing & Map Projections
Intro to GIS Fall 2010 Georeferencing & Map Projections SHAPE OF THE EARTH Earth's Shape Geoid: shape of earth minus topographic features (irregular due to local variations in gravity) Ellipsoid: elongated
More informationHistory of Cartography,
Maps History of Cartography, the art and science of making maps ~2300 BC ~600 BC Early oldest known maps: Babylonian clay tablets. Greek and Roman Ptolemy s (about AD 85-165) "world map" depicted the Old
More informationProjections and Coordinate Systems
Projections and Coordinate Systems Overview Projections Examples of different projections Coordinate systems Datums Projections Overview Projections and Coordinate Systems GIS must accurately represent
More informationWorking with georeferenced data. What is georeferencing? Coordinate Systems. Geographic and Projected Coordinate System
GIS501 Fundamentals of Geographical Information Systems (GIS) Coordinate Systems Working with georeferenced data What is georeferencing? Geographically referenced data which is, in some way, referenced
More informationFundamentals of Surveying (LE/ESSE ) Lecture 10
Fundamentals of Surveying (LE/ESSE 2620 3.0) Lecture 10 Topographic Mapping Dr.-Ing. Jianguo Wang Geomatics Engineering York University Fall 2017 1 10-1 Introduction Two main types of maps: Line maps Orthophotographic
More informationGEOID UNDULATIONS OF SUDAN USING ORTHOMETRIC HEIGHTS COMPARED WITH THE EGM96 ANG EGM2008
GEOID UNDULATIONS OF SUDAN USING ORTHOMETRIC HEIGHTS COMPARED Dr. Abdelrahim Elgizouli Mohamed Ahmed* WITH THE EGM96 ANG EGM2008 Abstract: Positioning by satellite system determine the normal height above
More informationREFERENCING COORDINATE SYSTEMS MAP PROJECTIONS GEOREFERENCING
GIS in Ecology SPATIAL REFERENCING COORDINATE SYSTEMS MAP PROJECTIONS GEOREFERENCING : :1 Where on earth? Early mapmakers recognized the need for a system that could locate features on the earth's surface.
More informationMap Projections & Coordinate Systems
Map Projections & Coordinate Systems 9/7/2017 1 Why? Laying the Earth Flat Need convenient means of measuring and comparing distances, directions, areas, shapes. Traditional surveying instruments measure
More informationModern Navigation. Thomas Herring
12.215 Modern Navigation Thomas Herring Today s class Map Projections: Why projections are needed Types of map projections Classification by type of projection Classification by characteristics of projection
More informationNotes on Projections Part II - Common Projections James R. Clynch February 2006
Notes on Projections Part II - Common Projections James R. Clynch February 2006 I. Common Projections There are several areas where maps are commonly used and a few projections dominate these fields. An
More informationSpatial Reference Systems. Introduction
Spatial Reference Systems Wolfgang Kainz Professor of Cartography and Geoinformation Department of Geography and Regional Research University of Vienna wolfgang.kainz@univie.ac.at Introduction Historic
More informationAppendix B Calculating Pipe Length and Mean Slope from GPS Data
Appendix B Calculating Pipe Length and Mean Slope from GPS Data B.1 THE BASICS: NORTHING AND EASTING Dimensions of the potential site for a water network can be measured with landbased surveying equipment,
More informationControl Surveys and Coordinate Systems
Control Surveys and Coordinate Systems The Earth is Round Basic Shape of the Earth: Oblate Spheroid of Revolution The length of the equatorial axis is approximately 27 miles greater than the polar axis.
More informationReferencing map features: Coordinate systems and map projections
Referencing map features: Coordinate systems and map projections Coordinate systems and map projections if we want to integrate geographic data from many different sources, we need to use a consistent
More information4 Survey Datums. 4.1 Horizontal Datum Policy SURVEY DATUMS SEPTEMBER 2006
4 Survey Datums Today s multi-organizational Project Development efforts require the use of common, accurate horizontal and vertical survey datums and consistent, precise control-survey procedures to ensure
More informationPlane coordinates ~~~~~~~~~~
Coordinate Systems & Map Projections Geographic coordinates A Basic Introduction to Coordinate Systems & Map Projections Latitude & longitude Angles Parallels & meridians Lines Plane coordinates ~~~~~~~~~~
More informationMap Projections 2/4/2013. Map Projections. Rhumb Line (Loxodrome) Great Circle. The GLOBE. Line of constant bearing (e.g., 292.
The GLOBE ADVANTAGES Directions True Distances True Shapes True Area True DISADVANTAGES Very small scale with little detail. Costly to reproduce and update. Difficult to carry around. Bulky to store. FACTS
More informationChapter 3 Models of the Earth. 3.1 Finding Locations on the Earth. 3.1 Objectives
Chapter 3 Models of the Earth 3.1 Finding Locations on the Earth 3.1 Objectives Explain latitude and longitude. How can latitude and longitude be used to find locations on Earth? How can a magnetic compass
More informationDirty REMOTE SENSING : Lecture 8 A mapping interlude..
Dirty REMOTE SENSING : Lecture 8 A mapping interlude.. Stuart Green Teagasc Spatial Analysis Group Stuart.green@teagasc.ie Web for the Week: http://electronics.howstuffworks.com/gps.htm http://www.cstars.ucdavis.edu/classes/ers186-w03/lecture17/lecture17.ppt
More informationHeight systems. Rudi Gens Alaska Satellite Facility
Rudi Gens Alaska Satellite Facility Outline Why bother about height systems? Relevant terms Coordinate systems Reference surfaces Geopotential number 2 Why bother about height systems? give a meaning to
More informationHeight systems. Rüdiger Gens
Rüdiger Gens 2 Outline! Why bother about height systems?! Relevant terms! Coordinate systems! Reference surfaces! Geopotential number! Why bother about height systems?! give a meaning to a value defined
More informationSolving the "Grid to Ground Problem" with Custom Coordinate Systems CV327-6 About the Speaker:
Solving the "Grid to Ground Problem" with Custom Coordinate Systems Richard Sincovec, LSI Director of Technology, Edward James Surveying President, Quux Software CV327-6 Grid projections such as the State
More informationRecall: The scale transformation
Recall: The scale transformation Geography 12: Maps and Spatial Reasoning Lecture 3: Map Projection Basics Professor Keith Clarke 1:400M The real world A representation of the world A cartographic problem
More informationGeoreferencing. Geography is the key to linking attributes. Georeferencing is the key to geography.
Georeferencing Geography is the key to linking attributes. Georeferencing is the key to geography. Why georeferencing? Many reasons for having georeferences Many different approaches to georeferencing
More informationIntroduction to Cartography GEOG 2016 E. Lecture-2 Geodesy and Projections
Introduction to Cartography GEOG 2016 E Lecture-2 Geodesy and Projections What is Geodesy? The science of geodesy determines: Earth s shape and Interrelation of different points on earth s surface The
More informationGeographic Information Systems class # 1 February 19, Coordinate reference systems in GIS: geodetic coordinates
Geographic Information Systems class # 1 February 19, 2013 Coordinate reference systems in GIS: geodetic coordinates Manuel Campagnolo ISA Manuel Campagnolo (ISA) GIS/SIG 2012 2013 February 19, 2013 1
More information2. Which geometric model has been used at some time to describe the earth? a. Sphere b. Oblate ellipsoid c. Flat disk. d. Geoid e.
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Geography 12 Sample Mid-Term Examination Before you
More informationModern Navigation. Thomas Herring
12.215 Modern Navigation Thomas Herring Today s Class Latitude and Longitude Simple spherical definitions Geodetic definition: For an ellipsoid Astronomical definition: Based on direction of gravity Relationships
More informationIntroduction to Geography
Introduction to Geography ropic of Cancer 3½ N Arctic Circle 90 N Prime Meridian 0 Arctic Ocean Mississippi R. Appalachian Mts. Europe Rocky Mountains N. America Atlantic Gulf of Ocean Mexico Caribbean
More informationCE 316 GEOMATICS COURSE NOTES DR. MOIR D HAUG, C.L.S., P. ENG. JANUARY 2012
CE 316 GEOMATICS COURSE NOTES DR. MOIR D HAUG, C.L.S., P. ENG. JANUARY 2012 0 COURSE INFORMATION Dr Moir D Haug, P. Eng University Office 2B25 Engineering 966 5355 moir.haug@usask.ca MDH Engineered Solutions
More informationSusan Cutter et al. Aug, 2002, The Professional Geographer, 54(3): David Tenenbaum GEOG 070 UNC-CH Spring 2005
What is Geography? Geography is not just about city and country names Geography is not just about population and growth Geography is not just about rivers and mountains Geography is a broad field that
More informationWhen the Earth Was Flat. Measurements were made using a plumb bob, a spirit level, and a stick. Also, the Stars.
ABSTRACT Defining the shape of the Earth geoid. Mathematical models spheroid or ellipsoid Mathematical projection of geodetic systems GIS/GPS technology The need for a unified projection systems World
More informationGeoreferencing. datum. projection. scale. The next few lectures will introduce you to these elements. on the Earth, you ll need to understand how
Georeferencing GOAL: To assign a location to all the features represented in our geographic information data In order to do so, we need to make use of the following elements: ellipsoid/geoid To determine
More informationChapter 2. Altitude Measurement
Chapter Altitude Measurement Although altitudes and zenith distances are equally suitable for navigational calculations, most formulas are traditionally based upon altitudes which are easily accessible
More informationCHAIRMAN OF THE JOINT CHIEFS OF STAFF INSTRUCTION
CHAIRMAN OF THE JOINT CHIEFS OF STAFF INSTRUCTION J-3 CJCSI 3900.01C DISTRIBUTION: A, B, C, J POSITION (POINT AND AREA) REFERENCE PROCEDURES Reference: DODD 5105.60, 11 October 1996, National Imagery and
More informationNAVIGATION THEORY QUESTIONS Basics of Navigation
NAVIGATION THEORY QUESTIONS Basics of Navigation Q610065 look at it The angle between the plane of the ecliptic and the plane of equator is approx? 23.5 degrees In which two months of the year is the difference
More informationGeodetics: Implications for GIS Professionals May 10, 2018
Experts in Geomatics, Surveying, Positioning, Geospatial Data, and Mapping Sciences Geodetics: Implications for GIS Professionals May 10, 2018 Michael Barnes APSG Education Foundation Chair 2010-2020 APSG
More informationGEOMATICS ENGINEERING / SURVEYING
1 GEOMATICS ENGINEERING / SURVEYING CHAPTER 1 Dr. Muhammad Ashraf Javid Assistant Professor Department of Civil and Environmental Engineering Email: muhammad.javid@unizwa.edu.om 2 Geomatics Engineering
More informationData acquisition and integration 1.
Data acquisition and integration 1. Ferenc Végső Data acquisition and integration 1.: Ferenc Végső Lector: Árpád Barsi This module was created within TÁMOP - 4.1.2-08/1/A-2009-0027 "Tananyagfejlesztéssel
More informationName Class Date. For each pair of terms, explain how the meanings of the terms differ.
Skills Worksheet Chapter Review USING KEY TERMS For each pair of terms, explain how the meanings of the terms differ. 1. true north and magnetic north 2. latitude and longitude 3. equator and prime meridian
More informationVT State Plane. Daniel J. Martin National Geodetic Survey VT Geodetic Advisor. VSLS Conference Rutland VT April 11, 2008
VT State Plane Daniel J. Martin National Geodetic Survey VT Geodetic Advisor VSLS Conference Rutland VT April 11, 2008 Today s Outline Define the problem Review of VT State Plane System Relationship
More informationGEOGRAPHIC COORDINATE SYSTEMS
GEOGRAPHIC COORDINATE SYSTEMS Introduction to GIS Winter 2015 What is Georeferencing? Used to establish a location on the Earth s surface 1 st order polynomial transformation Georeferencing toolbar What
More informationThe Nature of Spatial Data. Keith C. Clarke Geography UCSB
The Nature of Spatial Data Keith C. Clarke Geography UCSB Geographic primitives G = g (x, y, z, s, A, t) [x, y, z] = f(λ, φ, d) Geography also highly dependent upon model First, the datum (d) Models of
More informationGround Truth Annual Conference. Optimized Design of Low Distortion Projections. Michael L. Dennis, RLS, PE
Arizona Professional Land Surveyors Association 016 Annual Conference Ground Truth Optimized Design of Low Distortion Projections Michael L. Dennis, RLS, PE Version 3 (rev 1), May 016 Design and metadata
More informationWatershed Sciences 4930 & 6920 GEOGRAPHIC INFORMATION SYSTEMS
Watershed Sciences 4930 & 6920 GEOGRAPHIC INFORMATION SYSTEMS WEEK TWO Lecture PROJECTIONS Joe Wheaton Some of slides in this lecture adapted from content in Paul Bolstad s Fundamentals of GIS HOUSEKEEPING
More informationGPS Measurement Protocol
GPS Measurement Protocol Purpose To determine the latitude, longitude, and elevation of your school and of all your GLOBE sites Overview The GPS receiver will be used to determine the latitude, longitude
More informationMAP PROJECTIONS but before let s review some basic concepts.
MAP PROJECTIONS but before let s review some basic concepts. Types of Maps General Purpose Topographic Thematic/Choropleth Dot Graduated Circle Isometric/Isolines Isopleth Mental Maps Scale Small-scale
More informationSECTION 4 PARCEL IDENTIFIERS 4.1 LONGITUDE AND LATITUDE
SECTION 4 PARCEL IDENTIFIERS 4.1 LONGITUDE AND LATITUDE Most maps must be drawn in such a way that points and areas can be located accurately on the earth's surface and described objectively. A uniform
More informationTopographic Maps and Landforms Geology Lab
Topographic Maps and Landforms Geology Lab Ray Rector: Instructor Today s Lab Activities 1) Discussion of Last Week s Lab 2) Lecture on Topo Maps and Elevation Contours 3) Construct Topographic Maps and
More informationGPS Surveying Dr. Jayanta Kumar Ghosh Department of Civil Engineering Indian Institute of Technology, Roorkee. Lecture 06 GPS Position
GPS Surveying Dr. Jayanta Kumar Ghosh Department of Civil Engineering Indian Institute of Technology, Roorkee Lecture 06 GPS Position Friends! Welcome you to sixth class on GPS surveying. Today, I am going
More informationWatershed Sciences 4930 & 6920 GEOGRAPHIC INFORMATION SYSTEMS
PROJECTS Watershed Sciences 4930 & 6920 GEOGRAPHIC INFORMATION SYSTEMS WEEK THREE Lecture 5 PROJECT DATA/IDEAS, PROJECTIONS (Cont.) & LAB REVIEW Joe Wheaton GUEST LECTURE HOUSEKEEPING: LAB 01 GRADES This
More information71- Laxmi Nagar (South), Niwaru Road, Jhotwara, Jaipur ,India. Phone: Mob. : /
www.aarekh.com 71- Laxmi Nagar (South), Niwaru Road, Jhotwara, Jaipur 302 012,India. Phone: 0141-2348647 Mob. : +91-9799435640 / 9166936207 1. An invar tape made of an alloy of: A. Copper and steel. B.
More informationData acquisition and integration 1.
University of West Hungary, Faculty of Geoinformatics Ferenc Végső Data acquisition and integration 1. module DAI1 The basics of positioning SZÉKESFEHÉRVÁR 2010 The right to this intellectual property
More information