TeSys protection components Thermal-magnetic motor circuit-breakers GV2 ME and GV2 P

Transcription

1 Dimensions GV ME and GV P Dimensions GV ME GV AX GV AD, AM, AN, AU, AS, AX, X Block GV AD, AM, AN Block GV AU, AS, AX GV AE b, X b GV MEpp GV MEpp () Maximum X Electrical clearance 0 mm for Ue y 0 V,,, () GV P GV AD, AM, AN, AU, AS GV AK00 X Block GV AD, AM, AN Block GV AU, AS 0 X,,, (), () Maximum X Electrical clearance 0 mm for Ue y V, or 0 mm for Ue 0 V, or 0 mm for Ue 00 and 0 V X 0 mm GV GH 0, /

2 Mounting, dimensions GV ME and GV P Mounting GV ME On mm rail On panel with adapter plate GV AF0 On pre-slotted plate AM PA On rails DZ MB0, AF EA 0/0 0/0 0 0 c c. on AM DP00 ( x.) c on AM DE00, ED00 ( x ) 0 GV AF0 DZ ME DZ MB0 GV P On rail AM DE00, ED00 ( x ) Panel mounted On pre-slotted plate AM PA AFEA Adapter plate GK AF0,, ±,,, Dimensions GV AF0 GV AF Combination GV ME + TeSys K contactor Combination GV ME + TeSys D contactor Combination GV P + TeSys D contactor b b c c GV ME + LC D0 D LC D and D GV P + LC D0 D LC D and D b.. b.. c. 0. c 0.. c.. c.. d d c c d d /

3 mounting (continued) GV ME and GV P Dimensions (continued) GV AF + LAD Combination GV ME + TeSys D contactor Combination GV P + TeSys D contactor GV ME + LC D0 D LC D and D GV P + LC D0 D LC D and D b.. b.. c.. c.. c.. c.. d d.. GV ME + GV L (current limiter). mm height compensation plate GV F0 X ± b ± b c c d d c c X 0 X mm for Ue 0 V or 0 mm for 0 V < Ue y 0 V, Mounting Mounting of external operator GV AP0 or GV AP0 for motor circuit-breakers GV P Door cut-out,..., /

4 mounting (continued) GV ME and GV P GV ME, GV P Sets of busbars GV G, GV G, GV G, with terminal block GV G0 a l p l p a GV G ( x mm) Number of tap-offs GV G ( x mm) 0 GV G GV G ( x mm) 0 GV G 0 GV G 0 Sets of busbars GV Gppp with terminal block GV G0 GVG0 Sets of busbars GV G, GV G, GV G l l GV G ( x mm) GV G ( x mm) GV G ( x mm) Sets of busbars GV G 0 Sets of busbars GV G and GV G l l GV G ( x mm) GV G ( x mm) /

5 mounting GV RT GV RT Dimensions, X, X, X: Electrical clearance 0 mm for Ue < 0 V Mounting Mounting of external operator GV AP0,,... On mm rail On panel with adapter plate GV AF0 On pre-slotted plate AM PA On rails DZ MB,, 0/0 AFEA 0/0, 0 0 c, GVAF0 DZME DZMB0 c 0 on AM DP00 ( x.) c on AM DE00, ED00 ( x ) /0

6 mounting GV P GV P Dimensions X X () () X Electrical clearance (ISC max) 0 mm for Ue y 00 V, 0 mm for Ue y 0 V () Blocks GV ANpp, GV ADpp and GV AM () Blocks GV AUpp and GV ASpp Note: Leave a gap of mm between circuit-breakers: either an empty space or side-mounting add-on contact blocks. Horizontal mounting is possible up to 0 C Mounting Mounting with TeSys contactor LC D0A DA Side by side mounting with TeSys contactor LC D0A DA (S-shape busbar system GV S) 0 Mounting on rail AM DE00 or AM ED0 Panel mounting, using M screws,, xø Mounting on pre-slotted plate AM PA,,, AF EA /

7 mounting GV P and GV ME0 GV P (continued) Busbar systems Set of busbars GV G Set of busbars GV G Note: Leave a space of mm between circuit-breakers: either an empty space or side-mounting add-on contact blocks. Horizontal mounting is possible up to 0 C. Mounting of external operator GV AP0 or GV AP0 Depth mm Depth to 0 mm Bracket,...,... 0 Depth to 0 mm Door cut-out Ø,... 0 xø, GV ME0 Dimensions,,, 0, X 0 X 0 0,, 0, () X Electrical clearance (ISC max) 0 mm for Ue y 00 V, 0 mm for Ue y 0 V () Blocks GV A0 A0. Mounting Mounting on rail AM DE00 or AM ED0 Panel mounting, using M screws Mounting on pre-slotted plate AM PA,,, AF EA /

8 mounting GV R GV R Dimensions () () for GV Rp0. Motor circuit-breakers with terminal shields or phase barriers GV R + GV AC0 or AC0 () Phase barriers: GV AC0 () Terminal shields: GV AC0 Combination of GV R and TeSys contactor LC F with kit GV AC0p Minimum electrical clearance c a GV R + LC F or F0 + GV AC0 a b c x GV R + LC F + GV AC0 x x GV R + LC F + GV AC0 b GV R + LC F + GV AC0 Minimum distance between circuit-breakers mounted side by side 0 x Painted or insulated metal plate, insulation or insulated bar Bare metal plate x x 0 0 U y 0 V 0 V < U < 00 V U u 00 V 0 /

9 mounting GV R GV R Panel mounting Mounting on mounting rails DZ MB0 DZME Flush-mounting circuit-breaker GV R n circuit-breakers GV R side by side Combination of GV R and TeSys contactor LC F with kit GV AC0p G E H E G H GV R + LC F + GV AC0 0 GV R + LC F0 + GV AC0 0 GV R + LC F + GV AC0 0 GV R + LC F + GV AC0 0 GV R + LC F + GV AC0 0 0 /

10 mounting (continued) GV R GV R Spreaders GV AC0 0 X Connection Z Smooth terminals 0, a Z X Connectors 0 Z X Direct rotary handle GV AP0, GV AP0 Flush-mounting a GV Rp0 Rp0. GV Rp0. I 0 Direct rotary handle GV AP0 or GV AP0 with conversion accessory GV AP0 Front face cut-out Enclosure viewed from top e, h 0 0 Door cut-outs require a minimum distance between the centre of the circuit-breaker and the door hinge point D u 0 + (h x ) ± 0 0 e to max Extended rotary handle GV AP0, GV AP0, 0 I 0 l l : min, 00 max The shaft of the extended rotary handle GV AP0 or GV AP0 must be cut to length: l mm. 0 /

11 Schemes GV ME, GV P, GV P and GV RT Schemes GV MEpp and GV RT GV Ppp GV Ppp /L /L /L /L /T /L /T /T /L /L /L /L /T /T /T /T /T /T Front mounting add-on contact blocks Instantaneous auxiliary contacts Front mounting add-on contact blocks Instantaneous auxiliary contacts and fault signalling contacts GV AE GV AE GV AE0 GV AED GV AED0 or Side mounting add-on contact blocks Instantaneous auxiliary contacts and fault signalling contacts GV AD0 GV AD0 GV AD GV AD0 Instantaneous auxiliary contacts Short-circuit signalling contacts GV AN GV AN0 GV AM () () () () 0 () () () () 0 0 Voltage trips Current limiter GV AUppp GV ASppp GV AXppp GV L D D /L D D D D /L /L E E Use of fault signalling contact and short-circuit signalling contact Connection of undervoltage trip for dangerous machines (conforming to INRS) on GV ME only Short-circuit signalling GV AM GV ADpp /L /L /L D Agl max D Trip signalling N/C or N/O Start-Stop contact /T /T /T E E /

12 Schemes GV ME0 and GV R Schemes Motor circuit-breakers Auxiliary contact block modules GV ME0 GV A0 GV A0 GV A0 GV A0 GV A0 GV A0 /T /T /T /L /L /L Fault signalling contacts Voltage trips GV A0 GV A0 GV B GV D D U D C C Motor circuit-breakers Add-on auxiliary contacts according to their location () GV R GV AE, GV AB /L /L /L Location C/O contact Location Trip indication Location Electrical fault indication Location C/O contact /T /T /T A self-adhesive label, supplied with the contact, can be affixed to the front face of the circuit breaker to allow personalised marking according to the function of the contact or contacts. () See pages /0 and /. Electric trips GV AUppp GV ASppp GV AD, AD D D C C 0ms Recommended application schemes GV AD, AD Fault indication Contactor opening on overload KA Reset 0ms KA Overload fault A KA A B 0ms Reset KA KM A A Associated components KA: CA KN or CAD N Associated components KA: CAD + LAD K or RHK KM: LC D or LC F /

13 mounting Magnetic motor circuit-breakers GV L and GV LE GV L Dimensions GV AD, AM, AN, AU, AS GV AK00 X Block GV AD, AM, AN Block GV AU, AS 0 X,,, (), X Electrical clearance 0 mm for Ue y V, or 0 mm for Ue 0 V, or 0 mm for Ue 00 and 0 V. X 0 mm. Mounting On rail AM DE00, Panel mounted AM ED00 ( x ) () Maximum On pre-slotted mounting plate AM PA Adapter plate GK AF0 AF EA Ø,, ±,,,,. mm height compensation plate GV F0 GV LE Dimensions GV AD, AM, AN, AU, AS GV AE X Block GV AD, AM, AN Block GV AU, AS,, X,,, () X Electrical clearance 0 mm for Ue y 0 V. () Maximum Mounting On mm rail On panel with adapter plate GV AF0 On pre-slotted plate AM PA On rails DZ MB0 c,, c 0 on AM DP00 ( x.) and on AM DE00, ED00 ( x),, 0/0 AF EA 0/0 GV AF0 0 0 DZ ME DZ MB0 /

14 mounting (continued) 0 Magnetic motor circuit-breakers GV L and GV LE GV L and GV LE Mounting of external operator GV AP0 or GV AP0 for GV L,..., Mounting of external operator GV AP0 for GV LE,,... Door cut-out xø, Ø Sets of busbars GV G, GV G, GV G, with terminal block GV G0 a l p l p GV G ( x mm) GV G ( x mm) 0 GV G ( x mm) 0 a Number of tap-offs GV G GV G 0 GV G 0 /

15 mounting Magnetic motor circuit-breakers GV L, GV LE Sets of busbars for GV L and GV LE Sets of busbars GV Gppp with term. block GV G0 GVG0 Sets of busbars GV G, GV G, GV GR l I GV G ( x mm) GV G ( x mm) GV G ( x mm) Set of busbars GV G 0 l Sets of busbars GV G and GV G I GV G ( x mm) GV G ( x mm) /0

16 mounting Magnetic motor circuit-breakers GV L GV L Dimensions X X () () X Electrical clearance (ISC max) 0 mm for Ue y 00 V, 0 mm for Ue y 0 V () Blocks GV ANpp, GV ADpp and GV AM () Blocks GV AUpp and GV ASpp Note: Leave a space of mm between circuit-breakers: either an empty space or side-mounting add-on contact blocks. Side by side mounting is possible up to 0 C. Mounting Mounting with Tesys contactor LC D0A DA and relay LR D Side by side mounting with Tesys contactor LC D0A DA (S-shape busbar system GV S) 0 Mounting on rail AM DE00 or AM ED0 Panel mounting, using M screws,, xø Mounting on pre-slotted plate AM PA Set of busbars GV G Set of busbars GV G AF EA,,, /

17 mounting (continued) Magnetic motor circuit-breakers GV L and GK EF0 GV L (continued) Mounting of external operator GV AP0 or GV AP0 Depth mm Depth to 0 mm Bracket,...,... 0 Depth to 0 mm,... 0 Door cut-out Ø xø, GK EF0 0 X GK EF0 + GK AX 0 0, X a Number of GK AX 0 a... /

18 Schemes 0 Magnetic motor circuit-breakers GV L, GV LE, GV L and GK EF0 Magnetic motor circuit-breakers GV Lpp GV LEpp GV Lpp GK EF0 /L /L /L /L /L /L /L /L /L /T /T /T /T /T /T /T /T /T Accessories Front mounting add-on contact blocks Instantaneous auxiliary contacts GV AE GV AE GV AE0 GV AED and GV AED0 OR Side mounting add-on contact blocks Instantaneous auxiliary contacts and fault signalling contacts GV AD0 GV AD0 GV AD GV AD0 Instantaneous auxiliary contacts Short-circuit signalling contacts GV AN GV AN0 GV AM () () () () () () () () Voltage trips GV AUppp GV ASppp D D C C Start-Stop signalling contact blocks GK AX GK AX0 GK AX0 Fault signalling contact blocks GK AX GK AX GK AX /